Age | Commit message (Collapse) | Author | Files | Lines |
|
btree_iter is used in two ways: either allocated on the stack with a
fixed size MAX_BSETS, or from a mempool with a dynamic size based on the
specific cache set. Previously, the struct had a fixed-length array of
size MAX_BSETS which was indexed out-of-bounds for the dynamically-sized
iterators, which causes UBSAN to complain.
This patch uses the same approach as in bcachefs's sort_iter and splits
the iterator into a btree_iter with a flexible array member and a
btree_iter_stack which embeds a btree_iter as well as a fixed-length
data array.
Cc: stable@vger.kernel.org
Closes: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/2039368
Signed-off-by: Matthew Mirvish <matthew@mm12.xyz>
Signed-off-by: Coly Li <colyli@suse.de>
Link: https://lore.kernel.org/r/20240509011117.2697-3-colyli@suse.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
ida_alloc() and ida_free() should be preferred to the deprecated
ida_simple_get() and ida_simple_remove().
Note that the upper limit of ida_simple_get() is exclusive, but the one of
ida_alloc_max() is inclusive. So a -1 has been added when needed.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Coly Li <colyli@suse.de>
Link: https://lore.kernel.org/r/20240509011117.2697-2-colyli@suse.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
This reverts commit 3f9f231236ce7e48780d8a4f1f8cb9fae2df1e4e.
Using 64bit for 'sync_io' is unnecessary from the gendisk side. This
overflow will not cause any functional impact, except for a UBSAN
warning. Solving this overflow requires introducing additional
calculations and checks which are not necessary. So just keep using
32bit for 'sync_io'.
Signed-off-by: Li Nan <linan122@huawei.com>
Link: https://lore.kernel.org/r/20240507023103.781816-1-linan666@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
No functional changes intended.
Fixes: f2298c0403b0 ("null_blk: multi queue aware block test driver")
Signed-off-by: Zhu Yanjun <yanjun.zhu@linux.dev>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Link: https://lore.kernel.org/r/20240506075538.6064-1-yanjun.zhu@linux.dev
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/song/md into for-6.10/block
Pull MD fix from Song:
"This fixes an issue observed with dm-raid."
* tag 'md-6.10-20240502' of https://git.kernel.org/pub/scm/linux/kernel/git/song/md:
md: fix resync softlockup when bitmap size is less than array size
|
|
Is is reported that for dm-raid10, lvextend + lvchange --syncaction will
trigger following softlockup:
kernel:watchdog: BUG: soft lockup - CPU#3 stuck for 26s! [mdX_resync:6976]
CPU: 7 PID: 3588 Comm: mdX_resync Kdump: loaded Not tainted 6.9.0-rc4-next-20240419 #1
RIP: 0010:_raw_spin_unlock_irq+0x13/0x30
Call Trace:
<TASK>
md_bitmap_start_sync+0x6b/0xf0
raid10_sync_request+0x25c/0x1b40 [raid10]
md_do_sync+0x64b/0x1020
md_thread+0xa7/0x170
kthread+0xcf/0x100
ret_from_fork+0x30/0x50
ret_from_fork_asm+0x1a/0x30
And the detailed process is as follows:
md_do_sync
j = mddev->resync_min
while (j < max_sectors)
sectors = raid10_sync_request(mddev, j, &skipped)
if (!md_bitmap_start_sync(..., &sync_blocks))
// md_bitmap_start_sync set sync_blocks to 0
return sync_blocks + sectors_skippe;
// sectors = 0;
j += sectors;
// j never change
Root cause is that commit 301867b1c168 ("md/raid10: check
slab-out-of-bounds in md_bitmap_get_counter") return early from
md_bitmap_get_counter(), without setting returned blocks.
Fix this problem by always set returned blocks from
md_bitmap_get_counter"(), as it used to be.
Noted that this patch just fix the softlockup problem in kernel, the
case that bitmap size doesn't match array size still need to be fixed.
Fixes: 301867b1c168 ("md/raid10: check slab-out-of-bounds in md_bitmap_get_counter")
Reported-and-tested-by: Nigel Croxon <ncroxon@redhat.com>
Closes: https://lore.kernel.org/all/71ba5272-ab07-43ba-8232-d2da642acb4e@redhat.com/
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Link: https://lore.kernel.org/r/20240422065824.2516-1-yukuai1@huaweicloud.com
Signed-off-by: Song Liu <song@kernel.org>
|
|
Using targets such as dm-linear, a mapped device can be created to
contain only conventional zones. Such device should not be treated as
zoned as it does not contain any mandatory sequential write required
zone. Since such device can be randomly written, we can modify
dm_set_zones_restrictions() to set the mapped device zoned queue limit
to false to expose it as a regular block device. The function
dm_check_zoned() does this after counting the number of conventional
zones of the mapped device and comparing it to the total number of zones
reported. The special dm_check_zoned_cb() report zones callback function
is used to count conventional zones.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Benjamin Marzinski <bmarzins@redhat.com>
Link: https://lore.kernel.org/r/20240501110907.96950-2-dlemoal@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
When a mutex lock is not used any more, the function mutex_destroy
should be called to mark the mutex lock uninitialized.
Fixes: f2298c0403b0 ("null_blk: multi queue aware block test driver")
Signed-off-by: Zhu Yanjun <yanjun.zhu@linux.dev>
Link: https://lore.kernel.org/r/20240425171635.4227-1-yanjun.zhu@linux.dev
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/song/md into for-6.10/block
Pull MD fixes from Song:
"These changes contain various fixes by Yu Kuai, Li Nan, and
Florian-Ewald Mueller."
* tag 'md-6.10-20240425' of https://git.kernel.org/pub/scm/linux/kernel/git/song/md:
md: don't account sync_io if iostats of the disk is disabled
md: Fix overflow in is_mddev_idle
md: add check for sleepers in md_wakeup_thread()
md/raid5: fix deadlock that raid5d() wait for itself to clear MD_SB_CHANGE_PENDING
|
|
In null_zone_write, we do not need to first check if the target zone
condition is FULL, READONLY or OFFLINE: for theses conditions, the check
of the command sector against the zone write pointer will always result
in the command failing. Remove these checks.
We still however need to check that the target zone write pointer is not
invalid for zone append operations. To do so, add the macro
NULL_ZONE_INVALID_WP and use it in null_set_zone_cond() when changing a
zone to READONLY or OFFLINE condition.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20240411085502.728558-4-dlemoal@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
For zoned null_blk devices setup without any limit on the maximum number
of open and active zones, there is no need to count the number of zones
that are implicitly open, explicitly open and closed. This is indicated
by the boolean field need_zone_res_mgmt of sturct nullb_device.
Modify the zone management functions null_reset_zone(),
null_finish_zone(), null_open_zone() and null_close_zone() to manage
the zone condition counters only if the device need_zone_res_mgmt field
is true. With this change, the function __null_close_zone() is removed
and integrated into the 2 caller sites directly, with the
null_close_imp_open_zone() call site greatly simplified as this function
closes zones that are known to be in the implicit open condition.
null_zone_write() is modified in a similar manner to do zone condition
accouting only when the device need_zone_res_mgmt field is true.
With these changes, the inline helpers null_lock_zone_res() and
null_unlock_zone_res() are removed and replaced with direct calls to
spin_lock()/spin_unlock().
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Link: https://lore.kernel.org/r/20240411085502.728558-3-dlemoal@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Modify the null_handle_flush() and null_handle_rq() functions to return
a blk_status_t instead of an errno to simplify the call sites of these
functions and to be consistant with other null_handle_xxx() functions.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Nitesh Shetty <nj.shetty@samsung.com>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20240411085502.728558-2-dlemoal@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The only user of blk_revalidate_disk_zones() second argument was the
SCSI disk driver (sd). Now that this driver does not require this
update_driver_data argument, remove it to simplify the interface of
blk_revalidate_disk_zones(). Also update the function kdoc comment to
be more accurate (i.e. there is no gendisk ->revalidate method).
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Tested-by: Hans Holmberg <hans.holmberg@wdc.com>
Tested-by: Dennis Maisenbacher <dennis.maisenbacher@wdc.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/20240408014128.205141-21-dlemoal@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The zone append emulation of the scsi disk driver was the only driver
using BLK_STS_ZONE_RESOURCE. With this code removed,
BLK_STS_ZONE_RESOURCE is now unused. Remove this macro definition and
simplify blk_mq_dispatch_rq_list() where this status code was handled.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Tested-by: Hans Holmberg <hans.holmberg@wdc.com>
Tested-by: Dennis Maisenbacher <dennis.maisenbacher@wdc.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/20240408014128.205141-20-dlemoal@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The gendisk conventional zone bitmap is going away. So to check for the
presence of conventional zones on a zoned target device, always use
report zones.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Tested-by: Hans Holmberg <hans.holmberg@wdc.com>
Tested-by: Dennis Maisenbacher <dennis.maisenbacher@wdc.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/20240408014128.205141-19-dlemoal@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Add the fua configfs attribute and module parameter to allow
configuring if the device supports FUA or not. Using this attribute
has an effect on the null_blk device only if memory backing is enabled
together with a write cache (cache_size option).
This new attribute allows configuring a null_blk device with a write
cache but without FUA support. This is convenient to test the block
layer flush machinery.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Tested-by: Hans Holmberg <hans.holmberg@wdc.com>
Tested-by: Dennis Maisenbacher <dennis.maisenbacher@wdc.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/20240408014128.205141-18-dlemoal@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Add the zone_append_max_sectors configfs attribute and module parameter
to allow configuring the maximum number of 512B sectors of zone append
operations. This attribute is meaningful only for zoned null block
devices.
If not specified, the default is unchanged and the zoned device max
append sectors limit is set to the device max sectors limit.
If a non 0 value is used for this attribute, which is the default,
then native support for zone append operations is enabled.
Setting a 0 value disables native zone append operations support to
instead use the block layer emulation.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Tested-by: Hans Holmberg <hans.holmberg@wdc.com>
Tested-by: Dennis Maisenbacher <dennis.maisenbacher@wdc.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/20240408014128.205141-17-dlemoal@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
With zone write plugging enabled at the block layer level, a zoned
device can only ever see at most a single write operation per zone.
There is thus no need to request a block scheduler with strick per-zone
sequential write ordering control through the ELEVATOR_F_ZBD_SEQ_WRITE
feature. Removing this allows using a zoned null_blk device with any
scheduler, including "none".
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Tested-by: Hans Holmberg <hans.holmberg@wdc.com>
Tested-by: Dennis Maisenbacher <dennis.maisenbacher@wdc.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/20240408014128.205141-16-dlemoal@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
With zone write plugging enabled at the block layer level, any zone
device can only ever see at most a single write operation per zone.
There is thus no need to request a block scheduler with strick per-zone
sequential write ordering control through the ELEVATOR_F_ZBD_SEQ_WRITE
feature. Removing this allows using a zoned ublk device with any
scheduler, including "none".
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Tested-by: Hans Holmberg <hans.holmberg@wdc.com>
Tested-by: Dennis Maisenbacher <dennis.maisenbacher@wdc.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/20240408014128.205141-15-dlemoal@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Set the request queue of a TYPE_ZBC device as needing zone append
emulation by setting the device queue max_zone_append_sectors limit to
0. This enables the block layer generic implementation provided by zone
write plugging. With this, the sd driver will never see a
REQ_OP_ZONE_APPEND request and the zone append emulation code
implemented in sd_zbc.c can be removed.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Tested-by: Hans Holmberg <hans.holmberg@wdc.com>
Tested-by: Dennis Maisenbacher <dennis.maisenbacher@wdc.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/20240408014128.205141-14-dlemoal@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
For targets requiring zone append operation emulation with regular
writes (e.g. dm-crypt), we can use the block layer emulation provided by
zone write plugging. Remove DM implemented zone append emulation and
enable the block layer one.
This is done by setting the max_zone_append_sectors limit of the
mapped device queue to 0 for mapped devices that have a target table
that cannot support native zone append operations (e.g. dm-crypt).
Such mapped devices are flagged with the DMF_EMULATE_ZONE_APPEND flag.
dm_split_and_process_bio() is modified to execute
blk_zone_write_plug_bio() for such device to let the block layer
transform zone append operations into regular writes. This is done
after ensuring that the submitted BIO is split if it straddles zone
boundaries. Both changes are implemented unsing the inline helpers
dm_zone_write_plug_bio() and dm_zone_bio_needs_split() respectively.
dm_revalidate_zones() is also modified to use the block layer provided
function blk_revalidate_disk_zones() so that all zone resources needed
for zone append emulation are initialized by the block layer without DM
core needing to do anything. Since the device table is not yet live when
dm_revalidate_zones() is executed, enabling the use of
blk_revalidate_disk_zones() requires adding a pointer to the device
table in struct mapped_device. This avoids errors in
dm_blk_report_zones() trying to get the table with dm_get_live_table().
The mapped device table pointer is set to the table passed as argument
to dm_revalidate_zones() before calling blk_revalidate_disk_zones() and
reset to NULL after this function returns to restore the live table
handling for user call of report zones.
All the code related to zone append emulation is removed from
dm-zone.c. This leads to simplifications of the functions __map_bio()
and dm_zone_endio(). This later function now only needs to deal with
completions of real zone append operations for targets that support it.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Mike Snitzer <snitzer@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Tested-by: Hans Holmberg <hans.holmberg@wdc.com>
Tested-by: Dennis Maisenbacher <dennis.maisenbacher@wdc.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/20240408014128.205141-13-dlemoal@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
If iostats is disabled, disk_stats will not be updated and
part_stat_read_accum() only returns a constant value. In this case,
continuing to count sync_io and to check is_mddev_idle() is no longer
meaningful.
Signed-off-by: Li Nan <linan122@huawei.com>
Reviewed-by: Yu Kuai <yukuai3@huawei.com>
Link: https://lore.kernel.org/r/20240117031946.2324519-3-linan666@huaweicloud.com
Signed-off-by: Song Liu <song@kernel.org>
|
|
UBSAN reports this problem:
UBSAN: Undefined behaviour in drivers/md/md.c:8175:15
signed integer overflow:
-2147483291 - 2072033152 cannot be represented in type 'int'
Call trace:
dump_backtrace+0x0/0x310
show_stack+0x28/0x38
dump_stack+0xec/0x15c
ubsan_epilogue+0x18/0x84
handle_overflow+0x14c/0x19c
__ubsan_handle_sub_overflow+0x34/0x44
is_mddev_idle+0x338/0x3d8
md_do_sync+0x1bb8/0x1cf8
md_thread+0x220/0x288
kthread+0x1d8/0x1e0
ret_from_fork+0x10/0x18
'curr_events' will overflow when stat accum or 'sync_io' is greater than
INT_MAX.
Fix it by changing sync_io, last_events and curr_events to 64bit.
Signed-off-by: Li Nan <linan122@huawei.com>
Reviewed-by: Yu Kuai <yukuai3@huawei.com>
Link: https://lore.kernel.org/r/20240117031946.2324519-2-linan666@huaweicloud.com
Signed-off-by: Song Liu <song@kernel.org>
|
|
Check for sleeping thread before attempting its wake_up in
md_wakeup_thread() to avoid unnecessary spinlock contention.
With a 6.1 kernel, fio random read/write tests on many (>= 100)
virtual volumes, of 100 GiB each, on 3 md-raid5s on 8 SSDs each
(building a raid50), show by 3 to 4 % improved IOPS performance.
Signed-off-by: Florian-Ewald Mueller <florian-ewald.mueller@ionos.com>
Reviewed-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Jack Wang <jinpu.wang@ionos.com>
Link: https://lore.kernel.org/r/20240327114022.74634-1-jinpu.wang@ionos.com
Signed-off-by: Song Liu <song@kernel.org>
|
|
MD_SB_CHANGE_PENDING
Xiao reported that lvm2 test lvconvert-raid-takeover.sh can hang with
small possibility, the root cause is exactly the same as commit
bed9e27baf52 ("Revert "md/raid5: Wait for MD_SB_CHANGE_PENDING in raid5d"")
However, Dan reported another hang after that, and junxiao investigated
the problem and found out that this is caused by plugged bio can't issue
from raid5d().
Current implementation in raid5d() has a weird dependence:
1) md_check_recovery() from raid5d() must hold 'reconfig_mutex' to clear
MD_SB_CHANGE_PENDING;
2) raid5d() handles IO in a deadloop, until all IO are issued;
3) IO from raid5d() must wait for MD_SB_CHANGE_PENDING to be cleared;
This behaviour is introduce before v2.6, and for consequence, if other
context hold 'reconfig_mutex', and md_check_recovery() can't update
super_block, then raid5d() will waste one cpu 100% by the deadloop, until
'reconfig_mutex' is released.
Refer to the implementation from raid1 and raid10, fix this problem by
skipping issue IO if MD_SB_CHANGE_PENDING is still set after
md_check_recovery(), daemon thread will be woken up when 'reconfig_mutex'
is released. Meanwhile, the hang problem will be fixed as well.
Fixes: 5e2cf333b7bd ("md/raid5: Wait for MD_SB_CHANGE_PENDING in raid5d")
Cc: stable@vger.kernel.org # v5.19+
Reported-and-tested-by: Dan Moulding <dan@danm.net>
Closes: https://lore.kernel.org/all/20240123005700.9302-1-dan@danm.net/
Investigated-by: Junxiao Bi <junxiao.bi@oracle.com>
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Link: https://lore.kernel.org/r/20240322081005.1112401-1-yukuai1@huaweicloud.com
Signed-off-by: Song Liu <song@kernel.org>
|
|
Use bio_list_merge_init instead of open coding bio_list_merge and
bio_list_init.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Mike Snitzer <snitzer@kernel.org>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Link: https://lore.kernel.org/r/20240328084147.2954434-4-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
This debugging check will become more costly in the future when we shrink
struct page. It has not proven to be useful, so simply remove it.
This lets us use __xa_insert instead of __xa_cmpxchg() as we no longer
need to know about the page that is currently stored in the XArray.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Link: https://lore.kernel.org/r/20240315181212.2573753-1-willy@infradead.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild fixes from Masahiro Yamada:
- Deduplicate Kconfig entries for CONFIG_CXL_PMU
- Fix unselectable choice entry in MIPS Kconfig, and forbid this
structure
- Remove unused include/asm-generic/export.h
- Fix a NULL pointer dereference bug in modpost
- Enable -Woverride-init warning consistently with W=1
- Drop KCSAN flags from *.mod.c files
* tag 'kbuild-fixes-v6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
kconfig: Fix typo HEIGTH to HEIGHT
Documentation/llvm: Note s390 LLVM=1 support with LLVM 18.1.0 and newer
kbuild: Disable KCSAN for autogenerated *.mod.c intermediaries
kbuild: make -Woverride-init warnings more consistent
modpost: do not make find_tosym() return NULL
export.h: remove include/asm-generic/export.h
kconfig: do not reparent the menu inside a choice block
MIPS: move unselectable FIT_IMAGE_FDT_EPM5 out of the "System type" choice
cxl: remove CONFIG_CXL_PMU entry in drivers/cxl/Kconfig
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras
Pull EDAC fixes from Borislav Petkov:
- Fix more issues in the AMD FMPM driver
* tag 'edac_urgent_for_v6.9_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras:
RAS: Avoid build errors when CONFIG_DEBUG_FS=n
RAS/AMD/FMPM: Safely handle saved records of various sizes
RAS/AMD/FMPM: Avoid NULL ptr deref in get_saved_records()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq fixes from Borislav Petkov:
- Fix an unused function warning on irqchip/irq-armada-370-xp
- Fix the IRQ sharing with pinctrl-amd and ACPI OSL
* tag 'irq_urgent_for_v6.9_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irqchip/armada-370-xp: Suppress unused-function warning
genirq: Introduce IRQF_COND_ONESHOT and use it in pinctrl-amd
|
|
The -Woverride-init warn about code that may be intentional or not,
but the inintentional ones tend to be real bugs, so there is a bit of
disagreement on whether this warning option should be enabled by default
and we have multiple settings in scripts/Makefile.extrawarn as well as
individual subsystems.
Older versions of clang only supported -Wno-initializer-overrides with
the same meaning as gcc's -Woverride-init, though all supported versions
now work with both. Because of this difference, an earlier cleanup of
mine accidentally turned the clang warning off for W=1 builds and only
left it on for W=2, while it's still enabled for gcc with W=1.
There is also one driver that only turns the warning off for newer
versions of gcc but not other compilers, and some but not all the
Makefiles still use a cc-disable-warning conditional that is no
longer needed with supported compilers here.
Address all of the above by removing the special cases for clang
and always turning the warning off unconditionally where it got
in the way, using the syntax that is supported by both compilers.
Fixes: 2cd3271b7a31 ("kbuild: avoid duplicate warning options")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Acked-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes and updates from James Bottomley:
"Fully half this pull is updates to lpfc and qla2xxx which got
committed just as the merge window opened. A sizeable fraction of the
driver updates are simple bug fixes (and lock reworks for bug fixes in
the case of lpfc), so rather than splitting the few actual
enhancements out, we're just adding the drivers to the -rc1 pull.
The enhancements for lpfc are log message removals, copyright updates
and three patches redefining types. For qla2xxx it's just removing a
debug message on module removal and the manufacturer detail update.
The two major fixes are the sg teardown race and a core error leg
problem with the procfs directory not being removed if we destroy a
created host that never got to the running state. The rest are minor
fixes and constifications"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (41 commits)
scsi: bnx2fc: Remove spin_lock_bh while releasing resources after upload
scsi: core: Fix unremoved procfs host directory regression
scsi: mpi3mr: Avoid memcpy field-spanning write WARNING
scsi: sd: Fix TCG OPAL unlock on system resume
scsi: sg: Avoid sg device teardown race
scsi: lpfc: Copyright updates for 14.4.0.1 patches
scsi: lpfc: Update lpfc version to 14.4.0.1
scsi: lpfc: Define types in a union for generic void *context3 ptr
scsi: lpfc: Define lpfc_dmabuf type for ctx_buf ptr
scsi: lpfc: Define lpfc_nodelist type for ctx_ndlp ptr
scsi: lpfc: Use a dedicated lock for ras_fwlog state
scsi: lpfc: Release hbalock before calling lpfc_worker_wake_up()
scsi: lpfc: Replace hbalock with ndlp lock in lpfc_nvme_unregister_port()
scsi: lpfc: Update lpfc_ramp_down_queue_handler() logic
scsi: lpfc: Remove IRQF_ONESHOT flag from threaded IRQ handling
scsi: lpfc: Move NPIV's transport unregistration to after resource clean up
scsi: lpfc: Remove unnecessary log message in queuecommand path
scsi: qla2xxx: Update version to 10.02.09.200-k
scsi: qla2xxx: Delay I/O Abort on PCI error
scsi: qla2xxx: Change debug message during driver unload
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c fix from Wolfram Sang:
"A fix from Andi for I2C host drivers"
* tag 'i2c-for-6.9-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: i801: Fix a refactoring that broke a touchpad on Lenovo P1
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB fixes from Greg KH:
"Here are a bunch of small USB fixes for reported problems and
regressions for 6.9-rc2. Included in here are:
- deadlock fixes for long-suffering issues
- USB phy driver revert for reported problem
- typec fixes for reported problems
- duplicate id in dwc3 dropped
- dwc2 driver fixes
- udc driver warning fix
- cdc-wdm race bugfix
- other tiny USB bugfixes
All of these have been in linux-next this past week with no reported
issues"
* tag 'usb-6.9-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (26 commits)
USB: core: Fix deadlock in port "disable" sysfs attribute
USB: core: Add hub_get() and hub_put() routines
usb: typec: ucsi: Check capabilities before cable and identity discovery
usb: typec: ucsi: Clear UCSI_CCI_RESET_COMPLETE before reset
usb: typec: ucsi_acpi: Refactor and fix DELL quirk
usb: typec: ucsi: Ack unsupported commands
usb: typec: ucsi: Check for notifications after init
usb: typec: ucsi: Clear EVENT_PENDING under PPM lock
usb: typec: Return size of buffer if pd_set operation succeeds
usb: udc: remove warning when queue disabled ep
usb: dwc3: pci: Drop duplicate ID
usb: dwc3: Properly set system wakeup
Revert "usb: phy: generic: Get the vbus supply"
usb: cdc-wdm: close race between read and workqueue
usb: dwc2: gadget: LPM flow fix
usb: dwc2: gadget: Fix exiting from clock gating
usb: dwc2: host: Fix ISOC flow in DDMA mode
usb: dwc2: host: Fix remote wakeup from hibernation
usb: dwc2: host: Fix hibernation flow
USB: core: Fix deadlock in usb_deauthorize_interface()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull staging driver fixes from Greg KH:
"Here are two small staging driver fixes for the vc04_services driver
that resolve reported problems:
- strncpy fix for information leak
- another information leak discovered by the previous strncpy fix
Both of these have been in linux-next all this past week with no
reported issues"
* tag 'staging-6.9-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
staging: vc04_services: fix information leak in create_component()
staging: vc04_services: changen strncpy() to strscpy_pad()
|
|
Pull drm fixes from Dave Airlie:
"Regular fixes for rc2, quite a few i915/amdgpu as usual, some xe, and
then mostly scattered around. rc3 might be quieter with the holidays
but we shall see.
bridge:
- select DRM_KMS_HELPER
dma-buf:
- fix NULL-pointer deref
dp:
- fix div-by-zero in DP MST unplug code
fbdev:
- select FB_IOMEM_FOPS for SBus
sched:
- fix NULL-pointer deref
xe:
- Fix build on mips
- Fix wrong bound checks
- Fix use of msec rather than jiffies
- Remove dead code
amdgpu:
- SMU 14.0.1 updates
- DCN 3.5.x updates
- VPE fix
- eDP panel flickering fix
- Suspend fix
- PSR fix
- DCN 3.0+ fix
- VCN 4.0.6 updates
- debugfs fix
amdkfd:
- DMA-Buf fix
- GFX 9.4.2 TLB flush fix
- CP interrupt fix
i915:
- Fix for BUG_ON/BUILD_BUG_ON IN I915_memcpy.c
- Update a MTL workaround
- Fix locking inversion in hwmon's sysfs
- Remove a bogus error message around PXP
- Fix UAF on VMA
- Reset queue_priority_hint on parking
- Display Fixes:
- Remove duplicated audio enable/disable on SDVO and DP
- Disable AuxCCS for Xe driver
- Revert init order of MIPI DSI
- DRRS debugfs fix with an extra refactor patch
- VRR related fixes
- Fix a JSL eDP corruption
- Fix the cursor physical dma address
- BIOS VBT related fix
nouveau:
- dmem: handle kcalloc() allocation failures
qxl:
- remove unused variables
rockchip:
- vop2: remove support for AR30 and AB30 formats
vmwgfx:
- debugfs: create ttm_resource_manager entry only if needed"
* tag 'drm-fixes-2024-03-30' of https://gitlab.freedesktop.org/drm/kernel: (55 commits)
drm/i915/bios: Tolerate devdata==NULL in intel_bios_encoder_supports_dp_dual_mode()
drm/i915: Pre-populate the cursor physical dma address
drm/i915/gt: Reset queue_priority_hint on parking
drm/i915/vma: Fix UAF on destroy against retire race
drm/i915: Do not print 'pxp init failed with 0' when it succeed
drm/i915: Do not match JSL in ehl_combo_pll_div_frac_wa_needed()
drm/i915/hwmon: Fix locking inversion in sysfs getter
drm/i915/dsb: Fix DSB vblank waits when using VRR
drm/i915/vrr: Generate VRR "safe window" for DSB
drm/i915/display/debugfs: Fix duplicate checks in i915_drrs_status
drm/i915/drrs: Refactor CPU transcoder DRRS check
drm/i915/mtl: Update workaround 14018575942
drm/i915/dsi: Go back to the previous INIT_OTP/DISPLAY_ON order, mostly
drm/i915/display: Disable AuxCCS framebuffers if built for Xe
drm/i915: Stop doing double audio enable/disable on SDVO and g4x+ DP
drm/i915: Add includes for BUG_ON/BUILD_BUG_ON in i915_memcpy.c
drm/qxl: remove unused variable from `qxl_process_single_command()`
drm/qxl: remove unused `count` variable from `qxl_surface_id_alloc()`
drm/i915: add bug.h include to i915_memcpy.c
drm/vmwgfx: Create debugfs ttm_resource_manager entry only if needed
...
|
|
https://anongit.freedesktop.org/git/drm/drm-intel into drm-fixes
Core/GT Fixes:
- Fix for BUG_ON/BUILD_BUG_ON IN I915_memcpy.c (Joonas)
- Update a MTL workaround (Tejas)
- Fix locking inversion in hwmon's sysfs (Janusz)
- Remove a bogus error message around PXP (Jose)
- Fix UAF on VMA (Janusz)
- Reset queue_priority_hint on parking (Chris)
Display Fixes:
- Remove duplicated audio enable/disable on SDVO and DP (Ville)
- Disable AuxCCS for Xe driver (Juha-Pekka)
- Revert init order of MIPI DSI (Ville)
- DRRS debugfs fix with an extra refactor patch (Bhanuprakash)
- VRR related fixes (Ville)
- Fix a JSL eDP corruption (Jonathon)
- Fix the cursor physical dma address (Ville)
- BIOS VBT related fix (Ville)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ZgYaIVgjIs30mIvS@intel.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull thermal control fixes from Rafael Wysocki:
"These revert a problematic optimization commit and address a devfreq
cooling device issue.
Specifics:
- Revert thermal core optimization that introduced a functional issue
causing a critical trip point to be crossed in some cases (Daniel
Lezcano)
- Add missing conversion between different state ranges to the
devfreq cooling device driver (Ye Zhang)"
* tag 'thermal-6.9-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
thermal: devfreq_cooling: Fix perf state when calculate dfc res_util
Revert "thermal: core: Don't update trip points inside the hysteresis range"
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI fixes from Rafael Wysocki:
"These fix two issues that may lead to attempts to use memory that has
been freed already.
Specifics:
- Drop __exit annotation from einj_remove() in the ACPI APEI code
because this function can be called during runtime (Arnd Bergmann)
- Make acpi_db_walk_for_fields() check acpi_evaluate_object() return
value to avoid accessing memory that has been freed (Nikita
Kiryushin)"
* tag 'acpi-6.9-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPICA: debugger: check status of acpi_evaluate_object() in acpi_db_walk_for_fields()
ACPI: APEI: EINJ: mark remove callback as non-__exit
|
|
* acpica:
ACPICA: debugger: check status of acpi_evaluate_object() in acpi_db_walk_for_fields()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi
Pull EFI fixes from Ard Biesheuvel:
"These address all the outstanding EFI/x86 boot related regressions:
- Revert to the old initrd memory allocation soft limit of INT_MAX,
which was dropped inadvertently
- Ensure that startup_32() is entered with a valid boot_params
pointer when using the new EFI mixed mode protocol
- Fix a compiler warning introduced by a fix from the previous pull"
* tag 'efi-fixes-for-v6.9-3' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi:
x86/efistub: Reinstate soft limit for initrd loading
efi/libstub: Cast away type warning in use of max()
x86/efistub: Add missing boot_params for mixed mode compat entry
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm
Pull device mapper fixes from Mike Snitzer:
- Fix MAINTAINERS to not include M: dm-devel for DM entries.
- Fix DM vdo's murmurhash to use proper byteswapping methods.
- Fix DM integrity clang warning about comparison out-of-range.
* tag 'for-6.9/dm-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
dm integrity: fix out-of-range warning
dm vdo murmurhash3: use kernel byteswapping routines instead of GCC ones
MAINTAINERS: Remove incorrect M: tag for dm-devel@lists.linux.dev
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio fixes from Bartosz Golaszewski:
- fix a procfs failure when requesting an interrupt with a label
containing the '/' character
- add missing stubs for GPIO lookup functions for !GPIOLIB
- fix debug messages that would print "(null)" for NULL strings
* tag 'gpio-fixes-for-v6.9-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
gpiolib: Fix debug messaging in gpiod_find_and_request()
gpiolib: Add stubs for GPIO lookup functions
gpio: cdev: sanitize the label before requesting the interrupt
|
|
Depending on the value of CONFIG_HZ, clang complains about a pointless
comparison:
drivers/md/dm-integrity.c:4085:12: error: result of comparison of
constant 42949672950 with expression of type
'unsigned int' is always false
[-Werror,-Wtautological-constant-out-of-range-compare]
if (val >= (uint64_t)UINT_MAX * 1000 / HZ) {
As the check remains useful for other configurations, shut up the
warning by adding a second type cast to uint64_t.
Fixes: 468dfca38b1a ("dm integrity: add a bitmap mode")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Mikulas Patocka <mpatocka@redhat.com>
Reviewed-by: Justin Stitt <justinstitt@google.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
|
|
Also open-code the calls.
Reported-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Ken Raeburn <raeburn@redhat.com>
Signed-off-by: Matthew Sakai <msakai@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc
Pull MMC fixes from Ulf Hansson:
"MMC core:
- Fix regression for the mmc ioctl
MMC host:
- sdhci-of-dwcmshc: Fixup PM support in ->remove_new()
- sdhci-omap: Re-tune when device became runtime suspended"
* tag 'mmc-v6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
sdhci-of-dwcmshc: disable PM runtime in dwcmshc_remove()
mmc: sdhci-omap: re-tuning is needed after a pm transition to support emmc HS200 mode
mmc: core: Avoid negative index with array access
mmc: core: Initialize mmc_blk_ioc_data
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu
Pull iommu fixes from Joerg Roedel:
"ARM SMMU fixes:
- Fix swabbing of the STE fields in the unlikely event of running on
a big-endian machine
- Fix setting of STE.SHCFG on hardware that doesn't implement support
for attribute overrides
IOMMU core:
- PASID validation fix in device attach path"
* tag 'iommu-fixes-v6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu:
iommu: Validate the PASID in iommu_attach_device_pasid()
iommu/arm-smmu-v3: Fix access for STE.SHCFG
iommu/arm-smmu-v3: Add cpu_to_le64() around STRTAB_STE_0_V
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from bpf, WiFi and netfilter.
Current release - regressions:
- ipv6: fix address dump when IPv6 is disabled on an interface
Current release - new code bugs:
- bpf: temporarily disable atomic operations in BPF arena
- nexthop: fix uninitialized variable in nla_put_nh_group_stats()
Previous releases - regressions:
- bpf: protect against int overflow for stack access size
- hsr: fix the promiscuous mode in offload mode
- wifi: don't always use FW dump trig
- tls: adjust recv return with async crypto and failed copy to
userspace
- tcp: properly terminate timers for kernel sockets
- ice: fix memory corruption bug with suspend and rebuild
- at803x: fix kernel panic with at8031_probe
- qeth: handle deferred cc1
Previous releases - always broken:
- bpf: fix bug in BPF_LDX_MEMSX
- netfilter: reject table flag and netdev basechain updates
- inet_defrag: prevent sk release while still in use
- wifi: pick the version of SESSION_PROTECTION_NOTIF
- wwan: t7xx: split 64bit accesses to fix alignment issues
- mlxbf_gige: call request_irq() after NAPI initialized
- hns3: fix kernel crash when devlink reload during pf
initialization"
* tag 'net-6.9-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (81 commits)
inet: inet_defrag: prevent sk release while still in use
Octeontx2-af: fix pause frame configuration in GMP mode
net: lan743x: Add set RFE read fifo threshold for PCI1x1x chips
net: bcmasp: Remove phy_{suspend/resume}
net: bcmasp: Bring up unimac after PHY link up
net: phy: qcom: at803x: fix kernel panic with at8031_probe
netfilter: arptables: Select NETFILTER_FAMILY_ARP when building arp_tables.c
netfilter: nf_tables: skip netdev hook unregistration if table is dormant
netfilter: nf_tables: reject table flag and netdev basechain updates
netfilter: nf_tables: reject destroy command to remove basechain hooks
bpf: update BPF LSM designated reviewer list
bpf: Protect against int overflow for stack access size
bpf: Check bloom filter map value size
bpf: fix warning for crash_kexec
selftests: netdevsim: set test timeout to 10 minutes
net: wan: framer: Add missing static inline qualifiers
mlxbf_gige: call request_irq() after NAPI initialized
tls: get psock ref after taking rxlock to avoid leak
selftests: tls: add test with a partially invalid iov
tls: adjust recv return with async crypto and failed copy to userspace
...
|
|
https://gitlab.freedesktop.org/drm/misc/kernel into drm-fixes
Short summary of fixes pull:
bridge:
- select DRM_KMS_HELPER
dma-buf:
- fix NULL-pointer deref
dp:
- fix div-by-zero in DP MST unplug code
fbdev:
- select FB_IOMEM_FOPS for SBus
nouveau:
- dmem: handle kcalloc() allocation failures
qxl:
- remove unused variables
rockchip:
- vop2: remove support for AR30 and AB30 formats
sched:
- fix NULL-pointer deref
vmwgfx:
- debugfs: create ttm_resource_manager entry only if needed
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20240328134417.GA8673@localhost.localdomain
|
|
intel_bios_encoder_supports_dp_dual_mode()
If we have no VBT, or the VBT didn't declare the encoder
in question, we won't have the 'devdata' for the encoder.
Instead of oopsing just bail early.
We won't be able to tell whether the port is DP++ or not,
but so be it.
Cc: stable@vger.kernel.org
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/10464
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240319092443.15769-1-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
(cherry picked from commit 26410896206342c8a80d2b027923e9ee7d33b733)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|