summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)AuthorFilesLines
2023-11-30net: ravb: Use pm_runtime_resume_and_get()Claudiu Beznea1-1/+4
pm_runtime_get_sync() may return an error. In case it returns with an error dev->power.usage_count needs to be decremented. pm_runtime_resume_and_get() takes care of this. Thus use it. Fixes: c156633f1353 ("Renesas Ethernet AVB driver proper") Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru> Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-11-30net: ravb: Check return value of reset_control_deassert()Claudiu Beznea1-3/+6
reset_control_deassert() could return an error. Some devices cannot work if reset signal de-assert operation fails. To avoid this check the return code of reset_control_deassert() in ravb_probe() and take proper action. Along with it, the free_netdev() call from the error path was moved after reset_control_assert() on its own label (out_free_netdev) to free netdev in case reset_control_deassert() fails. Fixes: 0d13a1a464a0 ("ravb: Add reset support") Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru> Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-11-30net: libwx: fix memory leak on msix entryJiawen Wu1-1/+1
Since pci_free_irq_vectors() set pdev->msix_enabled as 0 in the calling of pci_msix_shutdown(), wx->msix_entries is never freed. Reordering the lines to fix the memory leak. Cc: stable@vger.kernel.org Fixes: 3f703186113f ("net: libwx: Add irq flow functions") Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com> Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com> Link: https://lore.kernel.org/r/20231128095928.1083292-1-jiawenwu@trustnetic.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-11-30ice: Fix VF Reset paths when interface in a failed over aggregateDave Ertman4-50/+118
There is an error when an interface has the following conditions: - PF is in an aggregate (bond) - PF has VFs created on it - bond is in a state where it is failed-over to the secondary interface - A VF reset is issued on one or more of those VFs The issue is generated by the originating PF trying to rebuild or reconfigure the VF resources. Since the bond is failed over to the secondary interface the queue contexts are in a modified state. To fix this issue, have the originating interface reclaim its resources prior to the tear-down and rebuild or reconfigure. Then after the process is complete, move the resources back to the currently active interface. There are multiple paths that can be used depending on what triggered the event, so create a helper function to move the queues and use paired calls to the helper (back to origin, process, then move back to active interface) under the same lag_mutex lock. Fixes: 1e0f9881ef79 ("ice: Flesh out implementation of support for SRIOV on bonded interface") Signed-off-by: Dave Ertman <david.m.ertman@intel.com> Tested-by: Sujai Buvaneswaran <sujai.buvaneswaran@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Link: https://lore.kernel.org/r/20231127212340.1137657-1-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-11-30Merge tag 'wireless-2023-11-29' of ↵Jakub Kicinski4-6/+7
git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless Johannes Berg says: ==================== wireless fixes: - debugfs had a deadlock (removal vs. use of files), fixes going through wireless ACKed by Greg - support for HT STAs on 320 MHz channels, even if it's not clear that should ever happen (that's 6 GHz), best not to WARN() - fix for the previous CQM fix that broke most cases - various wiphy locking fixes - various small driver fixes * tag 'wireless-2023-11-29' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless: wifi: mac80211: use wiphy locked debugfs for sdata/link wifi: mac80211: use wiphy locked debugfs helpers for agg_status wifi: cfg80211: add locked debugfs wrappers debugfs: add API to allow debugfs operations cancellation debugfs: annotate debugfs handlers vs. removal with lockdep debugfs: fix automount d_fsdata usage wifi: mac80211: handle 320 MHz in ieee80211_ht_cap_ie_to_sta_ht_cap wifi: avoid offset calculation on NULL pointer wifi: cfg80211: hold wiphy mutex for send_interface wifi: cfg80211: lock wiphy mutex for rfkill poll wifi: cfg80211: fix CQM for non-range use wifi: mac80211: do not pass AP_VLAN vif pointer to drivers during flush wifi: iwlwifi: mvm: fix an error code in iwl_mvm_mld_add_sta() wifi: mt76: mt7925: fix typo in mt7925_init_he_caps wifi: mt76: mt7921: fix 6GHz disabled by the missing default CLC config ==================== Link: https://lore.kernel.org/r/20231129150809.31083-3-johannes@sipsolutions.net Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-11-30Merge tag 'for-netdev' of ↵Jakub Kicinski2-2/+8
https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf Daniel Borkmann says: ==================== pull-request: bpf 2023-11-30 We've added 5 non-merge commits during the last 7 day(s) which contain a total of 10 files changed, 66 insertions(+), 15 deletions(-). The main changes are: 1) Fix AF_UNIX splat from use after free in BPF sockmap, from John Fastabend. 2) Fix a syzkaller splat in netdevsim by properly handling offloaded programs (and not device-bound ones), from Stanislav Fomichev. 3) Fix bpf_mem_cache_alloc_flags() to initialize the allocation hint, from Hou Tao. 4) Fix netkit by rejecting IFLA_NETKIT_PEER_INFO in changelink, from Daniel Borkmann. * tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf: bpf, sockmap: Add af_unix test with both sockets in map bpf, sockmap: af_unix stream sockets need to hold ref for pair sock netkit: Reject IFLA_NETKIT_PEER_INFO in netkit_change_link bpf: Add missed allocation hint for bpf_mem_cache_alloc_flags() netdevsim: Don't accept device bound programs ==================== Link: https://lore.kernel.org/r/20231129234916.16128-1-daniel@iogearbox.net Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-11-29ravb: Fix races between ravb_tx_timeout_work() and net related opsYoshihiro Shimoda1-1/+10
Fix races between ravb_tx_timeout_work() and functions of net_device_ops and ethtool_ops by using rtnl_trylock() and rtnl_unlock(). Note that since ravb_close() is under the rtnl lock and calls cancel_work_sync(), ravb_tx_timeout_work() should calls rtnl_trylock(). Otherwise, a deadlock may happen in ravb_tx_timeout_work() like below: CPU0 CPU1 ravb_tx_timeout() schedule_work() ... __dev_close_many() // Under rtnl lock ravb_close() cancel_work_sync() // Waiting ravb_tx_timeout_work() rtnl_lock() // This is possible to cause a deadlock If rtnl_trylock() fails, rescheduling the work with sleep for 1 msec. Fixes: c156633f1353 ("Renesas Ethernet AVB driver proper") Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru> Link: https://lore.kernel.org/r/20231127122420.3706751-1-yoshihiro.shimoda.uh@renesas.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-11-28r8169: prevent potential deadlock in rtl8169_closeHeiner Kallweit1-1/+3
ndo_stop() is RTNL-protected by net core, and the worker function takes RTNL as well. Therefore we will deadlock when trying to execute a pending work synchronously. To fix this execute any pending work asynchronously. This will do no harm because netif_running() is false in ndo_stop(), and therefore the work function is effectively a no-op. However we have to ensure that no task is running or pending after rtl_remove_one(), therefore add a call to cancel_work_sync(). Fixes: abe5fc42f9ce ("r8169: use RTNL to protect critical sections") Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Link: https://lore.kernel.org/r/12395867-1d17-4cac-aa7d-c691938fcddf@gmail.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-11-28r8169: fix deadlock on RTL8125 in jumbo mtu modeHeiner Kallweit1-1/+4
The original change results in a deadlock if jumbo mtu mode is used. Reason is that the phydev lock is held when rtl_reset_work() is called here, and rtl_jumbo_config() calls phy_start_aneg() which also tries to acquire the phydev lock. Fix this by calling rtl_reset_work() asynchronously. Fixes: 621735f59064 ("r8169: fix rare issue with broken rx after link-down on RTL8125") Reported-by: Ian Chen <free122448@hotmail.com> Tested-by: Ian Chen <free122448@hotmail.com> Cc: stable@vger.kernel.org Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Link: https://lore.kernel.org/r/caf6a487-ef8c-4570-88f9-f47a659faf33@gmail.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-11-28octeontx2-pf: Restore TC ingress police rules when interface is upSubbaraya Sundeep4-25/+102
TC ingress policer rules depends on interface receive queue contexts since the bandwidth profiles are attached to RQ contexts. When an interface is brought down all the queue contexts are freed. This in turn frees bandwidth profiles in hardware causing ingress police rules non-functional after the interface is brought up. Fix this by applying all the ingress police rules config to hardware in otx2_open. Also allow adding ingress rules only when interface is running since no contexts exist for the interface when it is down. Fixes: 68fbff68dbea ("octeontx2-pf: Add police action for TC flower") Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com> Link: https://lore.kernel.org/r/1700930217-5707-1-git-send-email-sbhatta@marvell.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-11-28octeontx2-pf: Fix adding mbox work queue entry when num_vfs > 64Geetha sowjanya1-2/+5
When more than 64 VFs are enabled for a PF then mbox communication between VF and PF is not working as mbox work queueing for few VFs are skipped due to wrong calculation of VF numbers. Fixes: d424b6c02415 ("octeontx2-pf: Enable SRIOV and added VF mbox handling") Signed-off-by: Geetha sowjanya <gakula@marvell.com> Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com> Link: https://lore.kernel.org/r/1700930042-5400-1-git-send-email-sbhatta@marvell.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-11-28net: stmmac: xgmac: Disable FPE MMC interruptsFurong Xu1-0/+4
Commit aeb18dd07692 ("net: stmmac: xgmac: Disable MMC interrupts by default") tries to disable MMC interrupts to avoid a storm of unhandled interrupts, but leaves the FPE(Frame Preemption) MMC interrupts enabled, FPE MMC interrupts can cause the same problem. Now we mask FPE TX and RX interrupts to disable all MMC interrupts. Fixes: aeb18dd07692 ("net: stmmac: xgmac: Disable MMC interrupts by default") Reviewed-by: Larysa Zaremba <larysa.zaremba@intel.com> Signed-off-by: Furong Xu <0x1207@gmail.com> Reviewed-by: Serge Semin <fancer.lancer@gmail.com> Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com> Link: https://lore.kernel.org/r/20231125060126.2328690-1-0x1207@gmail.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-11-28octeontx2-af: Fix possible buffer overflowElena Salomatkina1-2/+2
A loop in rvu_mbox_handler_nix_bandprof_free() contains a break if (idx == MAX_BANDPROF_PER_PFFUNC), but if idx may reach MAX_BANDPROF_PER_PFFUNC buffer '(*req->prof_idx)[layer]' overflow happens before that check. The patch moves the break to the beginning of the loop. Found by Linux Verification Center (linuxtesting.org) with SVACE. Fixes: e8e095b3b370 ("octeontx2-af: cn10k: Bandwidth profiles config support"). Signed-off-by: Elena Salomatkina <elena.salomatkina.cmc@gmail.com> Reviewed-by: Simon Horman <horms@kernel.org> Reviewed-by: Subbaraya Sundeep <sbhatta@marvell.com> Link: https://lore.kernel.org/r/20231124210802.109763-1-elena.salomatkina.cmc@gmail.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-11-28netkit: Reject IFLA_NETKIT_PEER_INFO in netkit_change_linkDaniel Borkmann1-0/+6
The IFLA_NETKIT_PEER_INFO attribute can only be used during device creation, but not via changelink callback. Hence reject it there. Fixes: 35dfaad7188c ("netkit, bpf: Add bpf programmable net device") Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Nikolay Aleksandrov <razor@blackwall.org> Cc: Jakub Kicinski <kuba@kernel.org> Reviewed-by: Jakub Kicinski <kuba@kernel.org> Link: https://lore.kernel.org/r/e86a277a1e8d3b19890312779e42f790b0605ea4.1701115314.git.daniel@iogearbox.net Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
2023-11-27wifi: mac80211: use wiphy locked debugfs helpers for agg_statusJohannes Berg1-3/+1
The read is currently with RCU and the write can deadlock, convert both for the sake of illustration. Make mac80211 depend on cfg80211 debugfs to get the helpers, but mac80211 debugfs without it does nothing anyway. This also required some adjustments in ath9k. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-11-26dpaa2-eth: recycle the RX buffer only after all processing doneIoana Ciornei1-2/+6
The blamed commit added support for Rx copybreak. This meant that for certain frame sizes, a new skb was allocated and the initial data buffer was recycled. Instead of waiting to recycle the Rx buffer only after all processing was done on it (like accessing the parse results or timestamp information), the code path just went ahead and re-used the buffer right away. This sometimes lead to corrupted HW and SW annotation areas. Fix this by delaying the moment when the buffer is recycled. Fixes: 50f826999a80 ("dpaa2-eth: add rx copybreak support") Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-11-26dpaa2-eth: increase the needed headroom to account for alignmentIoana Ciornei2-5/+5
Increase the needed headroom to account for a 64 byte alignment restriction which, with this patch, we make mandatory on the Tx path. The case in which the amount of headroom needed is not available is already handled by the driver which instead sends a S/G frame with the first buffer only holding the SW and HW annotation areas. Without this patch, we can empirically see data corruption happening between Tx and Tx confirmation which sometimes leads to the SW annotation area being overwritten. Since this is an old IP where the hardware team cannot help to understand the underlying behavior, we make the Tx alignment mandatory for all frames to avoid the crash on Tx conf. Also, remove the comment that suggested that this is just an optimization. This patch also sets the needed_headroom net device field to the usual value that the driver would need on the Tx path: - 64 bytes for the software annotation area - 64 bytes to account for a 64 byte aligned buffer address Fixes: 6e2387e8f19e ("staging: fsl-dpaa2/eth: Add Freescale DPAA2 Ethernet driver") Closes: https://lore.kernel.org/netdev/aa784d0c-85eb-4e5d-968b-c8f74fa86be6@gin.de/ Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-11-26net: dsa: mv88e6xxx: fix marvell 6350 probe crashGreg Ungerer1-2/+4
As of commit b92143d4420f ("net: dsa: mv88e6xxx: add infrastructure for phylink_pcs") probing of a Marvell 88e6350 switch causes a NULL pointer de-reference like this example: ... mv88e6085 d0072004.mdio-mii:11: switch 0x3710 detected: Marvell 88E6350, revision 2 8<--- cut here --- Unable to handle kernel NULL pointer dereference at virtual address 00000000 when read [00000000] *pgd=00000000 Internal error: Oops: 5 [#1] ARM Modules linked in: CPU: 0 PID: 8 Comm: kworker/u2:0 Not tainted 6.7.0-rc2-dirty #26 Hardware name: Marvell Armada 370/XP (Device Tree) Workqueue: events_unbound deferred_probe_work_func PC is at mv88e6xxx_port_setup+0x1c/0x44 LR is at dsa_port_devlink_setup+0x74/0x154 pc : [<c057ea24>] lr : [<c0819598>] psr: a0000013 sp : c184fce0 ip : c542b8f4 fp : 00000000 r10: 00000001 r9 : c542a540 r8 : c542bc00 r7 : c542b838 r6 : c5244580 r5 : 00000005 r4 : c5244580 r3 : 00000000 r2 : c542b840 r1 : 00000005 r0 : c1a02040 ... The Marvell 6350 switch has no SERDES interface and so has no corresponding pcs_ops defined for it. But during probing a call is made to mv88e6xxx_port_setup() which unconditionally expects pcs_ops to exist - though the presence of the pcs_ops->pcs_init function is optional. Modify code to check for pcs_ops first, before checking for and calling pcs_ops->pcs_init. Modify checking and use of pcs_ops->pcs_teardown which may potentially suffer the same problem. Fixes: b92143d4420f ("net: dsa: mv88e6xxx: add infrastructure for phylink_pcs") Signed-off-by: Greg Ungerer <gerg@kernel.org> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-11-26net: dsa: mv88e6xxx: fix marvell 6350 switch probingGreg Ungerer1-4/+16
As of commit de5c9bf40c45 ("net: phylink: require supported_interfaces to be filled") Marvell 88e6350 switches fail to be probed: ... mv88e6085 d0072004.mdio-mii:11: switch 0x3710 detected: Marvell 88E6350, revision 2 mv88e6085 d0072004.mdio-mii:11: phylink: error: empty supported_interfaces error creating PHYLINK: -22 mv88e6085: probe of d0072004.mdio-mii:11 failed with error -22 ... The problem stems from the use of mv88e6185_phylink_get_caps() to get the device capabilities. Create a new dedicated phylink_get_caps for the 6351 family (which the 6350 is one of) to properly support their set of capabilities. According to chip.h the 6351 switch family includes the 6171, 6175, 6350 and 6351 switches, so update each of these to use the correct phylink_get_caps. Fixes: de5c9bf40c45 ("net: phylink: require supported_interfaces to be filled") Signed-off-by: Greg Ungerer <gerg@kernel.org> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-11-24wifi: iwlwifi: mvm: fix an error code in iwl_mvm_mld_add_sta()Dan Carpenter1-1/+3
This error path should return -EINVAL instead of success. Fixes: 57974a55d995 ("wifi: iwlwifi: mvm: refactor iwl_mvm_mac_sta_state_common()") Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Acked-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/75e4ea09-db58-462f-bd4e-5ad4e5e5dcb5@moroto.mountain Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-11-24net: rswitch: Fix missing dev_kfree_skb_any() in error pathYoshihiro Shimoda1-8/+12
Before returning the rswitch_start_xmit() in the error path, dev_kfree_skb_any() should be called. So, fix it. Fixes: 33f5d733b589 ("net: renesas: rswitch: Improve TX timestamp accuracy") Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-11-24net: rswitch: Fix return value in rswitch_start_xmit()Yoshihiro Shimoda1-1/+1
This .ndo_start_xmit() function should return netdev_tx_t value, not -ENOMEM. So, fix it. Fixes: 33f5d733b589 ("net: renesas: rswitch: Improve TX timestamp accuracy") Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-11-24net: rswitch: Fix type of ret in rswitch_start_xmit()Yoshihiro Shimoda1-1/+1
The type of ret in rswitch_start_xmit() should be netdev_tx_t. So, fix it. Fixes: 3590918b5d07 ("net: ethernet: renesas: Add support for "Ethernet Switch"") Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-11-24netdevsim: Don't accept device bound programsStanislav Fomichev1-2/+2
Commit 2b3486bc2d23 ("bpf: Introduce device-bound XDP programs") introduced device-bound programs by largely reusing existing offloading infrastructure. This changed the semantics of 'prog->aux->offload' a bit. Now, it's non-NULL for both offloaded and device-bound programs. Instead of looking at 'prog->aux->offload' let's call bpf_prog_is_offloaded which should be true iff the program is offloaded and not merely device-bound. Fixes: 2b3486bc2d23 ("bpf: Introduce device-bound XDP programs") Reported-by: syzbot+44c2416196b7c607f226@syzkaller.appspotmail.com Signed-off-by: Stanislav Fomichev <sdf@google.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Reviewed-by: Jakub Kicinski <kuba@kernel.org> Cc: Dipendra Khadka <kdipendra88@gmail.com> Link: https://lore.kernel.org/bpf/20231114045453.1816995-2-sdf@google.com Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2023-11-23Merge tag 'net-6.7-rc3' of ↵Linus Torvalds32-262/+330
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from Jakub Kicinski: "Including fixes from bpf. Current release - regressions: - Revert "net: r8169: Disable multicast filter for RTL8168H and RTL8107E" - kselftest: rtnetlink: fix ip route command typo Current release - new code bugs: - s390/ism: make sure ism driver implies smc protocol in kconfig - two build fixes for tools/net Previous releases - regressions: - rxrpc: couple of ACK/PING/RTT handling fixes Previous releases - always broken: - bpf: verify bpf_loop() callbacks as if they are called unknown number of times - improve stability of auto-bonding with Hyper-V - account BPF-neigh-redirected traffic in interface statistics Misc: - net: fill in some more MODULE_DESCRIPTION()s" * tag 'net-6.7-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (58 commits) tools: ynl: fix duplicate op name in devlink tools: ynl: fix header path for nfsd net: ipa: fix one GSI register field width tls: fix NULL deref on tls_sw_splice_eof() with empty record net: axienet: Fix check for partial TX checksum vsock/test: fix SEQPACKET message bounds test i40e: Fix adding unsupported cloud filters ice: restore timestamp configuration after device reset ice: unify logic for programming PFINT_TSYN_MSK ice: remove ptp_tx ring parameter flag amd-xgbe: propagate the correct speed and duplex status amd-xgbe: handle the corner-case during tx completion amd-xgbe: handle corner-case during sfp hotplug net: veth: fix ethtool stats reporting octeontx2-pf: Fix ntuple rule creation to direct packet to VF with higher Rx queue than its PF net: usb: qmi_wwan: claim interface 4 for ZTE MF290 Revert "net: r8169: Disable multicast filter for RTL8168H and RTL8107E" net/smc: avoid data corruption caused by decline nfc: virtual_ncidev: Add variable to check if ndev is running dpll: Fix potential msg memleak when genlmsg_put_reply failed ...
2023-11-23net: ipa: fix one GSI register field widthAlex Elder1-1/+1
The width of the R_LENGTH field of the EV_CH_E_CNTXT_1 GSI register is 24 bits (not 20 bits) starting with IPA v5.0. Fix this. Fixes: faf0678ec8a0 ("net: ipa: add IPA v5.0 GSI register definitions") Signed-off-by: Alex Elder <elder@linaro.org> Link: https://lore.kernel.org/r/20231122231708.896632-1-elder@linaro.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-11-23net: axienet: Fix check for partial TX checksumSamuel Holland1-1/+1
Due to a typo, the code checked the RX checksum feature in the TX path. Fixes: 8a3b7a252dca ("drivers/net/ethernet/xilinx: added Xilinx AXI Ethernet driver") Signed-off-by: Samuel Holland <samuel.holland@sifive.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Radhey Shyam Pandey <radhey.shyam.pandey@amd.com> Link: https://lore.kernel.org/r/20231122004219.3504219-1-samuel.holland@sifive.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-11-23i40e: Fix adding unsupported cloud filtersIvan Vecera1-7/+9
If a VF tries to add unsupported cloud filter through virtchnl then i40e_add_del_cloud_filter(_big_buf) returns -ENOTSUPP but this error code is stored in 'ret' instead of 'aq_ret' that is used as error code sent back to VF. In this scenario where one of the mentioned functions fails the value of 'aq_ret' is zero so the VF will incorrectly receive a 'success'. Use 'aq_ret' to store return value and remove 'ret' local variable. Additionally fix the issue when filter allocation fails, in this case no notification is sent back to the VF. Fixes: e284fc280473 ("i40e: Add and delete cloud filter") Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Ivan Vecera <ivecera@redhat.com> Tested-by: Rafal Romanowski <rafal.romanowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Link: https://lore.kernel.org/r/20231121211338.3348677-1-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-11-23ice: restore timestamp configuration after device resetJacob Keller3-40/+51
The driver calls ice_ptp_cfg_timestamp() during ice_ptp_prepare_for_reset() to disable timestamping while the device is resetting. This operation destroys the user requested configuration. While the driver does call ice_ptp_cfg_timestamp in ice_rebuild() to restore some hardware settings after a reset, it unconditionally passes true or false, resulting in failure to restore previous user space configuration. This results in a device reset forcibly disabling timestamp configuration regardless of current user settings. This was not detected previously due to a quirk of the LinuxPTP ptp4l application. If ptp4l detects a missing timestamp, it enters a fault state and performs recovery logic which includes executing SIOCSHWTSTAMP again, restoring the now accidentally cleared configuration. Not every application does this, and for these applications, timestamps will mysteriously stop after a PF reset, without being restored until an application restart. Fix this by replacing ice_ptp_cfg_timestamp() with two new functions: 1) ice_ptp_disable_timestamp_mode() which unconditionally disables the timestamping logic in ice_ptp_prepare_for_reset() and ice_ptp_release() 2) ice_ptp_restore_timestamp_mode() which calls ice_ptp_restore_tx_interrupt() to restore Tx timestamping configuration, calls ice_set_rx_tstamp() to restore Rx timestamping configuration, and issues an immediate TSYN_TX interrupt to ensure that timestamps which may have occurred during the device reset get processed. Modify the ice_ptp_set_timestamp_mode to directly save the user configuration and then call ice_ptp_restore_timestamp_mode. This way, reset no longer destroys the saved user configuration. This obsoletes the ice_set_tx_tstamp() function which can now be safely removed. With this change, all devices should now restore Tx and Rx timestamping functionality correctly after a PF reset without application intervention. Fixes: 77a781155a65 ("ice: enable receive hardware timestamping") Fixes: ea9b847cda64 ("ice: enable transmit timestamps for E810 devices") Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-11-23ice: unify logic for programming PFINT_TSYN_MSKJacob Keller1-26/+34
Commit d938a8cca88a ("ice: Auxbus devices & driver for E822 TS") modified how Tx timestamps are handled for E822 devices. On these devices, only the clock owner handles reading the Tx timestamp data from firmware. To do this, the PFINT_TSYN_MSK register is modified from the default value to one which enables reacting to a Tx timestamp on all PHY ports. The driver currently programs PFINT_TSYN_MSK in different places depending on whether the port is the clock owner or not. For the clock owner, the PFINT_TSYN_MSK value is programmed during ice_ptp_init_owner just before calling ice_ptp_tx_ena_intr to program the PHY ports. For the non-clock owner ports, the PFINT_TSYN_MSK is programmed during ice_ptp_init_port. If a large enough device reset occurs, the PFINT_TSYN_MSK register will be reset to the default value in which only the PHY associated directly with the PF will cause the Tx timestamp interrupt to trigger. The driver lacks logic to reprogram the PFINT_TSYN_MSK register after a device reset. For the E822 device, this results in the PF no longer responding to interrupts for other ports. This results in failure to deliver Tx timestamps to user space applications. Rename ice_ptp_configure_tx_tstamp to ice_ptp_cfg_tx_interrupt, and unify the logic for programming PFINT_TSYN_MSK and PFINT_OICR_ENA into one place. This function will program both registers according to the combination of user configuration and device requirements. This ensures that PFINT_TSYN_MSK is always restored when we configure the Tx timestamp interrupt. Fixes: d938a8cca88a ("ice: Auxbus devices & driver for E822 TS") Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-11-23ice: remove ptp_tx ring parameter flagJacob Keller3-18/+0
Before performing a Tx timestamp in ice_stamp(), the driver checks a ptp_tx ring variable to see if timestamping is enabled on that ring. This value is set for all rings whenever userspace configures Tx timestamping. Ostensibly this was done to avoid wasting cycles checking other fields when timestamping has not been enabled. However, for Tx timestamps we already get an individual per-SKB flag indicating whether userspace wants to request a timestamp on that packet. We do not gain much by also having a separate flag to check for whether timestamping was enabled. In fact, the driver currently fails to restore the field after a PF reset. Because of this, if a PF reset occurs, timestamps will be disabled. Since this flag doesn't add value in the hotpath, remove it and always provide a timestamp if the SKB flag has been set. A following change will fix the reset path to properly restore user timestamping configuration completely. This went unnoticed for some time because one of the most common applications using Tx timestamps, ptp4l, will reconfigure the socket as part of its fault recovery logic. Fixes: ea9b847cda64 ("ice: enable transmit timestamps for E810 devices") Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-11-23amd-xgbe: propagate the correct speed and duplex statusRaju Rangoju1-3/+8
xgbe_get_link_ksettings() does not propagate correct speed and duplex information to ethtool during cable unplug. Due to which ethtool reports incorrect values for speed and duplex. Address this by propagating correct information. Fixes: 7c12aa08779c ("amd-xgbe: Move the PHY support into amd-xgbe") Acked-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com> Signed-off-by: Raju Rangoju <Raju.Rangoju@amd.com> Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-11-23amd-xgbe: handle the corner-case during tx completionRaju Rangoju1-0/+14
The existing implementation uses software logic to accumulate tx completions until the specified time (1ms) is met and then poll them. However, there exists a tiny gap which leads to a race between resetting and checking the tx_activate flag. Due to this the tx completions are not reported to upper layer and tx queue timeout kicks-in restarting the device. To address this, introduce a tx cleanup mechanism as part of the periodic maintenance process. Fixes: c5aa9e3b8156 ("amd-xgbe: Initial AMD 10GbE platform driver") Acked-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com> Signed-off-by: Raju Rangoju <Raju.Rangoju@amd.com> Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-11-23amd-xgbe: handle corner-case during sfp hotplugRaju Rangoju1-1/+13
Force the mode change for SFI in Fixed PHY configurations. Fixed PHY configurations needs PLL to be enabled while doing mode set. When the SFP module isn't connected during boot, driver assumes AN is ON and attempts auto-negotiation. However, if the connected SFP comes up in Fixed PHY configuration the link will not come up as PLL isn't enabled while the initial mode set command is issued. So, force the mode change for SFI in Fixed PHY configuration to fix link issues. Fixes: e57f7a3feaef ("amd-xgbe: Prepare for working with more than one type of phy") Acked-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com> Signed-off-by: Raju Rangoju <Raju.Rangoju@amd.com> Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-11-23net: veth: fix ethtool stats reportingLorenzo Bianconi1-1/+1
Fix a possible misalignment between page_pool stats and tx xdp_stats reported in veth_get_ethtool_stats routine. The issue can be reproduced configuring the veth pair with the following tx/rx queues: $ip link add v0 numtxqueues 2 numrxqueues 4 type veth peer name v1 \ numtxqueues 1 numrxqueues 1 and loading a simple XDP program on v0 that just returns XDP_PASS. In this case on v0 the page_pool stats overwrites tx xdp_stats for queue 1. Fix the issue incrementing pp_idx of dev->real_num_tx_queues * VETH_TQ_STATS_LEN since we always report xdp_stats for all tx queues in ethtool. Fixes: 4fc418053ec7 ("net: veth: add page_pool stats") Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Link: https://lore.kernel.org/r/c5b5d0485016836448453f12846c7c4ab75b094a.1700593593.git.lorenzo@kernel.org Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-11-23octeontx2-pf: Fix ntuple rule creation to direct packet to VF with higher Rx ↵Suman Ghosh1-1/+19
queue than its PF It is possible to add a ntuple rule which would like to direct packet to a VF whose number of queues are greater/less than its PF's queue numbers. For example a PF can have 2 Rx queues but a VF created on that PF can have 8 Rx queues. As of today, ntuple rule will reject rule because it is checking the requested queue number against PF's number of Rx queues. As a part of this fix if the action of a ntuple rule is to move a packet to a VF's queue then the check is removed. Also, a debug information is printed to aware user that it is user's responsibility to cross check if the requested queue number on that VF is a valid one. Fixes: f0a1913f8a6f ("octeontx2-pf: Add support for ethtool ntuple filters") Signed-off-by: Suman Ghosh <sumang@marvell.com> Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://lore.kernel.org/r/20231121165624.3664182-1-sumang@marvell.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-11-23net: usb: qmi_wwan: claim interface 4 for ZTE MF290Lech Perczak1-0/+1
Interface 4 is used by for QMI interface in stock firmware of MF28D, the router which uses MF290 modem. Rebind it to qmi_wwan after freeing it up from option driver. The proper configuration is: Interface mapping is: 0: QCDM, 1: (unknown), 2: AT (PCUI), 2: AT (Modem), 4: QMI T: Bus=01 Lev=02 Prnt=02 Port=00 Cnt=01 Dev#= 4 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=19d2 ProdID=0189 Rev= 0.00 S: Manufacturer=ZTE, Incorporated S: Product=ZTE LTE Technologies MSM C:* #Ifs= 5 Cfg#= 1 Atr=e0 MxPwr=500mA I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms I:* If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=84(I) Atr=03(Int.) MxPS= 64 Ivl=2ms E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan E: Ad=86(I) Atr=03(Int.) MxPS= 64 Ivl=2ms E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms Cc: Bjørn Mork <bjorn@mork.no> Signed-off-by: Lech Perczak <lech.perczak@gmail.com> Link: https://lore.kernel.org/r/20231117231918.100278-3-lech.perczak@gmail.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-11-22wifi: mt76: mt7925: fix typo in mt7925_init_he_capsLorenzo Bianconi1-2/+2
Use iftype for interface type switch in mt7925_init_he_caps routine. This found during code review but later Coverity reported this with id 1549845. Fixes: c948b5da6bbe ("wifi: mt76: mt7925: add Mediatek Wi-Fi7 driver for mt7925 chips") Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/7de6e939dc75ee08f05bf1ee73253aa7eeccf28e.1699869649.git.lorenzo@kernel.org
2023-11-22Revert "net: r8169: Disable multicast filter for RTL8168H and RTL8107E"Heiner Kallweit1-3/+1
This reverts commit efa5f1311c4998e9e6317c52bc5ee93b3a0f36df. I couldn't reproduce the reported issue. What I did, based on a pcap packet log provided by the reporter: - Used same chip version (RTL8168h) - Set MAC address to the one used on the reporters system - Replayed the EAPOL unicast packet that, according to the reporter, was filtered out by the mc filter. The packet was properly received. Therefore the root cause of the reported issue seems to be somewhere else. Disabling mc filtering completely for the most common chip version is a quite big hammer. Therefore revert the change and wait for further analysis results from the reporter. Cc: stable@vger.kernel.org Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-11-22nfc: virtual_ncidev: Add variable to check if ndev is runningNguyen Dinh Phi1-1/+6
syzbot reported an memory leak that happens when an skb is add to send_buff after virtual nci closed. This patch adds a variable to track if the ndev is running before handling new skb in send function. Signed-off-by: Nguyen Dinh Phi <phind.uet@gmail.com> Reported-by: syzbot+6eb09d75211863f15e3e@syzkaller.appspotmail.com Closes: https://lore.kernel.org/lkml/00000000000075472b06007df4fb@google.com Reviewed-by: Bongsu Jeon Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-11-22dpll: Fix potential msg memleak when genlmsg_put_reply failedHao Ge1-5/+12
We should clean the skb resource if genlmsg_put_reply failed. Fixes: 9d71b54b65b1 ("dpll: netlink: Add DPLL framework base functions") Signed-off-by: Hao Ge <gehao@kylinos.cn> Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev> Link: https://lore.kernel.org/r/20231121013709.73323-1-gehao@kylinos.cn Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-11-22Merge tag 'for-netdev' of ↵Jakub Kicinski3-62/+42
https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf Daniel Borkmann says: ==================== pull-request: bpf 2023-11-21 We've added 19 non-merge commits during the last 4 day(s) which contain a total of 18 files changed, 1043 insertions(+), 416 deletions(-). The main changes are: 1) Fix BPF verifier to validate callbacks as if they are called an unknown number of times in order to fix not detecting some unsafe programs, from Eduard Zingerman. 2) Fix bpf_redirect_peer() handling which missed proper stats accounting for veth and netkit and also generally fix missing stats for the latter, from Peilin Ye, Daniel Borkmann et al. * tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf: selftests/bpf: check if max number of bpf_loop iterations is tracked bpf: keep track of max number of bpf_loop callback iterations selftests/bpf: test widening for iterating callbacks bpf: widening for callback iterators selftests/bpf: tests for iterating callbacks bpf: verify callbacks as if they are called unknown number of times bpf: extract setup_func_entry() utility function bpf: extract __check_reg_arg() utility function selftests/bpf: fix bpf_loop_bench for new callback verification scheme selftests/bpf: track string payload offset as scalar in strobemeta selftests/bpf: track tcp payload offset as scalar in xdp_synproxy selftests/bpf: Add netkit to tc_redirect selftest selftests/bpf: De-veth-ize the tc_redirect test case bpf, netkit: Add indirect call wrapper for fetching peer dev bpf: Fix dev's rx stats for bpf_redirect_peer traffic veth: Use tstats per-CPU traffic counters netkit: Add tstats per-CPU traffic counters net: Move {l,t,d}stats allocation to core and convert veth & vrf net, vrf: Move dstats structure to core ==================== Link: https://lore.kernel.org/r/20231121193113.11796-1-daniel@iogearbox.net Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-11-22net: usb: ax88179_178a: fix failed operations during ax88179_resetJose Ignacio Tornos Martinez1-2/+2
Using generic ASIX Electronics Corp. AX88179 Gigabit Ethernet device, the following test cycle has been implemented: - power on - check logs - shutdown - after detecting the system shutdown, disconnect power - after approximately 60 seconds of sleep, power is restored Running some cycles, sometimes error logs like this appear: kernel: ax88179_178a 2-9:1.0 (unnamed net_device) (uninitialized): Failed to write reg index 0x0001: -19 kernel: ax88179_178a 2-9:1.0 (unnamed net_device) (uninitialized): Failed to read reg index 0x0001: -19 ... These failed operation are happening during ax88179_reset execution, so the initialization could not be correct. In order to avoid this, we need to increase the delay after reset and clock initial operations. By using these larger values, many cycles have been run and no failed operations appear. It would be better to check some status register to verify when the operation has finished, but I do not have found any available information (neither in the public datasheets nor in the manufacturer's driver). The only available information for the necessary delays is the maufacturer's driver (original values) but the proposed values are not enough for the tested devices. Fixes: e2ca90c276e1f ("ax88179_178a: ASIX AX88179_178A USB 3.0/2.0 to gigabit ethernet adapter driver") Reported-by: Herb Wei <weihao.bj@ieisystem.com> Tested-by: Herb Wei <weihao.bj@ieisystem.com> Signed-off-by: Jose Ignacio Tornos Martinez <jtornosm@redhat.com> Link: https://lore.kernel.org/r/20231120120642.54334-1-jtornosm@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-11-21Merge tag 'platform-drivers-x86-v6.7-2' of ↵Linus Torvalds4-52/+20
git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86 Pull x86 platform drivers fixes from Ilpo Järvinen: "Just a few fixes (one with two non-fix deps) plus tidying up MAINTAINERS" * tag 'platform-drivers-x86-v6.7-2' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: platform/x86: intel_telemetry: Fix kernel doc descriptions MAINTAINERS: Drop Mark Gross as maintainer for x86 platform drivers platform/x86/amd/pmc: adjust getting DRAM size behavior platform/x86: hp-bioscfg: Remove unused obj in hp_add_other_attributes() platform/x86: hp-bioscfg: Fix error handling in hp_add_other_attributes() platform/x86: hp-bioscfg: move mutex_lock() down in hp_add_other_attributes() platform/x86: hp-bioscfg: Simplify return check in hp_add_other_attributes() platform/x86: ideapad-laptop: Set max_brightness before using it MAINTAINERS: Remove stale entry for SBL platform driver
2023-11-21hv_netvsc: Mark VF as slave before exposing it to user-modeLong Li1-9/+23
When a VF is being exposed form the kernel, it should be marked as "slave" before exposing to the user-mode. The VF is not usable without netvsc running as master. The user-mode should never see a VF without the "slave" flag. This commit moves the code of setting the slave flag to the time before VF is exposed to user-mode. Cc: stable@vger.kernel.org Fixes: 0c195567a8f6 ("netvsc: transparent VF management") Signed-off-by: Long Li <longli@microsoft.com> Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Acked-by: Dexuan Cui <decui@microsoft.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-11-21hv_netvsc: Fix race of register_netdevice_notifier and VF registerHaiyang Zhang1-2/+7
If VF NIC is registered earlier, NETDEV_REGISTER event is replayed, but NETDEV_POST_INIT is not. Move register_netdevice_notifier() earlier, so the call back function is set before probing. Cc: stable@vger.kernel.org Fixes: e04e7a7bbd4b ("hv_netvsc: Fix a deadlock by getting rtnl lock earlier in netvsc_probe()") Reported-by: Dexuan Cui <decui@microsoft.com> Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com> Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com> Reviewed-by: Dexuan Cui <decui@microsoft.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-11-21hv_netvsc: fix race of netvsc and VF register_netdeviceHaiyang Zhang1-10/+15
The rtnl lock also needs to be held before rndis_filter_device_add() which advertises nvsp_2_vsc_capability / sriov bit, and triggers VF NIC offering and registering. If VF NIC finished register_netdev() earlier it may cause name based config failure. To fix this issue, move the call to rtnl_lock() before rndis_filter_device_add(), so VF will be registered later than netvsc / synthetic NIC, and gets a name numbered (ethX) after netvsc. Cc: stable@vger.kernel.org Fixes: e04e7a7bbd4b ("hv_netvsc: Fix a deadlock by getting rtnl lock earlier in netvsc_probe()") Reported-by: Dexuan Cui <decui@microsoft.com> Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com> Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Reviewed-by: Dexuan Cui <decui@microsoft.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-11-21platform/x86: intel_telemetry: Fix kernel doc descriptionsAndy Shevchenko1-2/+2
LKP found issues with a kernel doc in the driver: core.c:116: warning: Function parameter or member 'ioss_evtconfig' not described in 'telemetry_update_events' core.c:188: warning: Function parameter or member 'ioss_evtconfig' not described in 'telemetry_get_eventconfig' It looks like it were copy'n'paste typos when these descriptions had been introduced. Fix the typos. Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202310070743.WALmRGSY-lkp@intel.com/ Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20231120150756.1661425-1-andriy.shevchenko@linux.intel.com Reviewed-by: Rajneesh Bhardwaj <irenic.rajneesh@gmail.com> Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
2023-11-20bpf, netkit: Add indirect call wrapper for fetching peer devDaniel Borkmann1-1/+2
ndo_get_peer_dev is used in tcx BPF fast path, therefore make use of indirect call wrapper and therefore optimize the bpf_redirect_peer() internal handling a bit. Add a small skb_get_peer_dev() wrapper which utilizes the INDIRECT_CALL_1() macro instead of open coding. Future work could potentially add a peer pointer directly into struct net_device in future and convert veth and netkit over to use it so that eventually ndo_get_peer_dev can be removed. Co-developed-by: Nikolay Aleksandrov <razor@blackwall.org> Signed-off-by: Nikolay Aleksandrov <razor@blackwall.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Stanislav Fomichev <sdf@google.com> Link: https://lore.kernel.org/r/20231114004220.6495-7-daniel@iogearbox.net Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
2023-11-20veth: Use tstats per-CPU traffic countersPeilin Ye1-19/+11
Currently veth devices use the lstats per-CPU traffic counters, which only cover TX traffic. veth_get_stats64() actually populates RX stats of a veth device from its peer's TX counters, based on the assumption that a veth device can _only_ receive packets from its peer, which is no longer true: For example, recent CNIs (like Cilium) can use the bpf_redirect_peer() BPF helper to redirect traffic from NIC's tc ingress to veth's tc ingress (in a different netns), skipping veth's peer device. Unfortunately, this kind of traffic isn't currently accounted for in veth's RX stats. In preparation for the fix, use tstats (instead of lstats) to maintain both RX and TX counters for each veth device. We'll use RX counters for bpf_redirect_peer() traffic, and keep using TX counters for the usual "peer-to-peer" traffic. In veth_get_stats64(), calculate RX stats by _adding_ RX count to peer's TX count, in order to cover both kinds of traffic. veth_stats_rx() might need a name change (perhaps to "veth_stats_xdp()") for less confusion, but let's leave it to another patch to keep the fix minimal. Signed-off-by: Peilin Ye <peilin.ye@bytedance.com> Co-developed-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org> Link: https://lore.kernel.org/r/20231114004220.6495-5-daniel@iogearbox.net Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
generated by cgit v1.2.3 (git 2.39.0) at 2024-10-05 09:39:45 +0300