summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)AuthorFilesLines
2012-01-07Merge branch 'x86-mce-for-linus' of ↵Linus Torvalds3-8/+6
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip * 'x86-mce-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86: add IRQ context simulation in module mce-inject x86, mce, therm_throt: Don't report power limit and package level thermal throttle events in mcelog x86, MCE: Drain mcelog buffer x86, mce: Add wrappers for registering on the decode chain
2012-01-07Merge branch 'x86-rdrand-for-linus' of ↵Linus Torvalds1-2/+6
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip * 'x86-rdrand-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: random: Use arch_get_random_int instead of cycle counter if avail
2012-01-07Merge branch 'x86-asm-for-linus' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip * 'x86-asm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (21 commits) x86: Fix atomic64_xxx_cx8() functions x86: Fix and improve cmpxchg_double{,_local}() x86_64, asm: Optimise fls(), ffs() and fls64() x86, bitops: Move fls64.h inside __KERNEL__ x86: Fix and improve percpu_cmpxchg{8,16}b_double() x86: Report cpb and eff_freq_ro flags correctly x86/i386: Use less assembly in strlen(), speed things up a bit x86: Use the same node_distance for 32 and 64-bit x86: Fix rflags in FAKE_STACK_FRAME x86: Clean up and extend do_int3() x86: Call do_notify_resume() with interrupts enabled x86/div64: Add a micro-optimization shortcut if base is power of two x86-64: Cleanup some assembly entry points x86-64: Slightly shorten line system call entry and exit paths x86-64: Reduce amount of redundant code generated for invalidate_interruptNN x86-64: Slightly shorten int_ret_from_sys_call x86, efi: Convert efi_phys_get_time() args to physical addresses x86: Default to vsyscall=emulate x86-64: Set siginfo and context on vsyscall emulation faults x86: consolidate xchg and xadd macros ...
2012-01-07Merge branch 'x86-apic-for-linus' of ↵Linus Torvalds4-16/+12
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip * 'x86-apic-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86: Skip cpus with apic-ids >= 255 in !x2apic_mode x86, x2apic: Allow "nox2apic" to disable x2apic mode setup by BIOS x86, x2apic: Fallback to xapic when BIOS doesn't setup interrupt-remapping x86, acpi: Skip acpi x2apic entries if the x2apic feature is not present x86, apic: Add probe() for apic_flat x86: Simplify code by removing a !SMP #ifdefs from 'struct cpuinfo_x86' x86: Convert per-cpu counter icr_read_retry_count into a member of irq_stat x86: Add per-cpu stat counter for APIC ICR read tries pci, x86/io-apic: Allow PCI_IOAPIC to be user configurable on x86 x86: Fix the !CONFIG_NUMA build of the new CPU ID fixup code support x86: Add NumaChip support x86: Add x86_init platform override to fix up NUMA core numbering x86: Make flat_init_apic_ldr() available
2012-01-07Merge branch 'timers-core-for-linus' of ↵Linus Torvalds3-7/+5
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip * 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86, tsc: Skip TSC synchronization checks for tsc=reliable clocksource: Convert tcb_clksrc to use clocksource_register_hz/khz clocksource: cris: Convert to clocksource_register_khz clocksource: xtensa: Convert to clocksource_register_hz/khz clocksource: um: Convert to clocksource_register_hz/khz clocksource: parisc: Convert to clocksource_register_hz/khz clocksource: m86k: Convert to clocksource_register_hz/khz time: x86: Replace LATCH with PIT_LATCH in i8253 clocksource driver time: x86: Remove CLOCK_TICK_RATE from acpi_pm clocksource driver time: x86: Remove CLOCK_TICK_RATE from mach_timer.h time: x86: Remove CLOCK_TICK_RATE from tsc code time: Fix spelling mistakes in new comments time: fix bogus comment in timekeeping_get_ns_raw
2012-01-06Merge branch 'sched-core-for-linus' of ↵Linus Torvalds4-65/+58
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip * 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (40 commits) sched/tracing: Add a new tracepoint for sleeptime sched: Disable scheduler warnings during oopses sched: Fix cgroup movement of waking process sched: Fix cgroup movement of newly created process sched: Fix cgroup movement of forking process sched: Remove cfs bandwidth period check in tg_set_cfs_period() sched: Fix load-balance lock-breaking sched: Replace all_pinned with a generic flags field sched: Only queue remote wakeups when crossing cache boundaries sched: Add missing rcu_dereference() around ->real_parent usage [S390] fix cputime overflow in uptime_proc_show [S390] cputime: add sparse checking and cleanup sched: Mark parent and real_parent as __rcu sched, nohz: Fix missing RCU read lock sched, nohz: Set the NOHZ_BALANCE_KICK flag for idle load balancer sched, nohz: Fix the idle cpu check in nohz_idle_balance sched: Use jump_labels for sched_feat sched/accounting: Fix parameter passing in task_group_account_field sched/accounting: Fix user/system tick double accounting sched/accounting: Re-use scheduler statistics for the root cgroup ... Fix up conflicts in - arch/ia64/include/asm/cputime.h, include/asm-generic/cputime.h usecs_to_cputime64() vs the sparse cleanups - kernel/sched/fair.c, kernel/time/tick-sched.c scheduler changes in multiple branches
2012-01-06Merge branch 'perf-core-for-linus' of ↵Linus Torvalds4-34/+209
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip * 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (106 commits) perf kvm: Fix copy & paste error in description perf script: Kill script_spec__delete perf top: Fix a memory leak perf stat: Introduce get_ratio_color() helper perf session: Remove impossible condition check perf tools: Fix feature-bits rework fallout, remove unused variable perf script: Add generic perl handler to process events perf tools: Use for_each_set_bit() to iterate over feature flags perf tools: Unify handling of features when writing feature section perf report: Accept fifos as input file perf tools: Moving code in some files perf tools: Fix out-of-bound access to struct perf_session perf tools: Continue processing header on unknown features perf tools: Improve macros for struct feature_ops perf: builtin-record: Document and check that mmap_pages must be a power of two. perf: builtin-record: Provide advice if mmap'ing fails with EPERM. perf tools: Fix truncated annotation perf script: look up thread using tid instead of pid perf tools: Look up thread names for system wide profiling perf tools: Fix comm for processes with named threads ...
2012-01-06Merge branch 'core-rcu-for-linus' of ↵Linus Torvalds1-0/+7
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip * 'core-rcu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (64 commits) cpu: Export cpu_up() rcu: Apply ACCESS_ONCE() to rcu_boost() return value Revert "rcu: Permit rt_mutex_unlock() with irqs disabled" docs: Additional LWN links to RCU API rcu: Augment rcu_batch_end tracing for idle and callback state rcu: Add rcutorture tests for srcu_read_lock_raw() rcu: Make rcutorture test for hotpluggability before offlining CPUs driver-core/cpu: Expose hotpluggability to the rest of the kernel rcu: Remove redundant rcu_cpu_stall_suppress declaration rcu: Adaptive dyntick-idle preparation rcu: Keep invoking callbacks if CPU otherwise idle rcu: Irq nesting is always 0 on rcu_enter_idle_common rcu: Don't check irq nesting from rcu idle entry/exit rcu: Permit dyntick-idle with callbacks pending rcu: Document same-context read-side constraints rcu: Identify dyntick-idle CPUs on first force_quiescent_state() pass rcu: Remove dynticks false positives and RCU failures rcu: Reduce latency of rcu_prepare_for_idle() rcu: Eliminate RCU_FAST_NO_HZ grace-period hang rcu: Avoid needlessly IPIing CPUs at GP end ...
2012-01-06Merge branch 'core-memblock-for-linus' of ↵Linus Torvalds1-15/+10
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip * 'core-memblock-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (52 commits) memblock: Reimplement memblock allocation using reverse free area iterator memblock: Kill early_node_map[] score: Use HAVE_MEMBLOCK_NODE_MAP s390: Use HAVE_MEMBLOCK_NODE_MAP mips: Use HAVE_MEMBLOCK_NODE_MAP ia64: Use HAVE_MEMBLOCK_NODE_MAP SuperH: Use HAVE_MEMBLOCK_NODE_MAP sparc: Use HAVE_MEMBLOCK_NODE_MAP powerpc: Use HAVE_MEMBLOCK_NODE_MAP memblock: Implement memblock_add_node() memblock: s/memblock_analyze()/memblock_allow_resize()/ and update users memblock: Track total size of regions automatically powerpc: Cleanup memblock usage memblock: Reimplement memblock_enforce_memory_limit() using __memblock_remove() memblock: Make memblock functions handle overflowing range @size memblock: Reimplement __memblock_remove() using memblock_isolate_range() memblock: Separate out memblock_isolate_range() from memblock_set_node() memblock: Kill memblock_init() memblock: Kill sentinel entries at the end of static region arrays memblock: Add __memblock_dump_all() ...
2012-01-05Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds4-6/+24
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: fix CAN MAINTAINERS SCM tree type mwifiex: fix crash during simultaneous scan and connect b43: fix regression in PIO case ath9k: Fix kernel panic in AR2427 in AP mode CAN MAINTAINERS update net: fsl: fec: fix build for mx23-only kernel sch_qfq: fix overflow in qfq_update_start() Revert "Bluetooth: Increase HCI reset timeout in hci_dev_do_close"
2012-01-04Merge branch 'master' of ↵John W. Linville3-4/+22
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless into for-davem
2012-01-04Revert "rtc: Expire alarms after the time is set."Linus Torvalds1-6/+0
This reverts commit 93b2ec0128c431148b216b8f7337c1a52131ef03. The call to "schedule_work()" in rtc_initialize_alarm() happens too early, and can cause oopses at bootup Neil Brown explains why we do it: "If you set an alarm in the future, then shutdown and boot again after that time, then you will end up with a timer_queue node which is in the past. When this happens the queue gets stuck. That entry-in-the-past won't get removed until and interrupt happens and an interrupt won't happen because the RTC only triggers an interrupt when the alarm is "now". So you'll find that e.g. "hwclock" will always tell you that 'select' timed out. So we force the interrupt work to happen at the start just in case." and has a patch that convert it to do things in-process rather than with the worker thread, but right now it's too late to play around with this, so we just revert the patch that caused problems for now. Reported-by: Sander Eikelenboom <linux@eikelenboom.it> Requested-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Requested-by: John Stultz <john.stultz@linaro.org> Cc: Neil Brown <neilb@suse.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-01-04Merge commit 'v3.2-rc7' into x86/asmIngo Molnar238-2269/+4155
Merge reason: Update from -rc4 to -rc7. Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-01-04Revert "rtc: Disable the alarm in the hardware"Linus Torvalds1-34/+10
This reverts commit c0afabd3d553c521e003779c127143ffde55a16f. It causes failures on Toshiba laptops - instead of disabling the alarm, it actually seems to enable it on the affected laptops, resulting in (for example) the laptop powering on automatically five minutes after shutdown. There's a patch for it that appears to work for at least some people, but it's too late to play around with this, so revert for now and try again in the next merge window. See for example http://bugs.debian.org/652869 Reported-and-bisected-by: Andreas Friedrich <afrie@gmx.net> (Toshiba Tecra) Reported-by: Antonio-M. Corbi Bellot <antonio.corbi@ua.es> (Toshiba Portege R500) Reported-by: Marco Santos <marco.santos@waynext.com> (Toshiba Portege Z830) Reported-by: Christophe Vu-Brugier <cvubrugier@yahoo.fr> (Toshiba Portege R830) Cc: Jonathan Nieder <jrnieder@gmail.com> Requested-by: John Stultz <john.stultz@linaro.org> Cc: stable@kernel.org # for the versions that applied this Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-01-03mwifiex: fix crash during simultaneous scan and connectAmitkumar Karwar1-1/+6
If 'iw connect' command is fired when driver is already busy in serving 'iw scan' command, ssid specific scan operation for connect is skipped. In this case cmd wait queue handler gets called with no command in queue (i.e. adapter->cmd_queued = NULL). This patch adds a NULL check in mwifiex_wait_queue_complete() routine to fix crash observed during simultaneous scan and assoc operations. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-01-03b43: fix regression in PIO caseGuennadi Liakhovetski1-3/+13
This patch fixes the regression, introduced by commit 17030f48e31adde5b043741c91ba143f5f7db0fd From: Rafał Miłecki <zajec5@gmail.com> Date: Thu, 11 Aug 2011 17:16:27 +0200 Subject: [PATCH] b43: support new RX header, noticed to be used in 598.314+ fw in PIO case. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-01-03ath9k: Fix kernel panic in AR2427 in AP modeMohammed Shafi Shajakhan1-0/+3
don't do aggregation related stuff for 'AP mode client power save handling' if aggregation is not enabled in the driver, otherwise it will lead to panic because those data structures won't be never intialized in 'ath_tx_node_init' if aggregation is disabled EIP is at ath_tx_aggr_wakeup+0x37/0x80 [ath9k] EAX: e8c09a20 EBX: f2a304e8 ECX: 00000001 EDX: 00000000 ESI: e8c085e0 EDI: f2a304ac EBP: f40e1ca4 ESP: f40e1c8c DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068 Process swapper/1 (pid: 0, ti=f40e0000 task=f408e860 task.ti=f40dc000) Stack: 0001e966 e8c09a20 00000000 f2a304ac e8c085e0 f2a304ac f40e1cb0 f8186741 f8186700 f40e1d2c f922988d f2a304ac 00000202 00000001 c0b4ba43 00000000 0000000f e8eb75c0 e8c085e0 205b0001 34383220 f2a304ac f2a30000 00010020 Call Trace: [<f8186741>] ath9k_sta_notify+0x41/0x50 [ath9k] [<f8186700>] ? ath9k_get_survey+0x110/0x110 [ath9k] [<f922988d>] ieee80211_sta_ps_deliver_wakeup+0x9d/0x350 [mac80211] [<c018dc75>] ? __module_address+0x95/0xb0 [<f92465b3>] ap_sta_ps_end+0x63/0xa0 [mac80211] [<f9246746>] ieee80211_rx_h_sta_process+0x156/0x2b0 [mac80211] [<f9247d1e>] ieee80211_rx_handlers+0xce/0x510 [mac80211] [<c018440b>] ? trace_hardirqs_on+0xb/0x10 [<c056936e>] ? skb_queue_tail+0x3e/0x50 [<f9248271>] ieee80211_prepare_and_rx_handle+0x111/0x750 [mac80211] [<f9248bf9>] ieee80211_rx+0x349/0xb20 [mac80211] [<f9248949>] ? ieee80211_rx+0x99/0xb20 [mac80211] [<f818b0b8>] ath_rx_tasklet+0x818/0x1d00 [ath9k] [<f8187a75>] ? ath9k_tasklet+0x35/0x1c0 [ath9k] [<f8187a75>] ? ath9k_tasklet+0x35/0x1c0 [ath9k] [<f8187b33>] ath9k_tasklet+0xf3/0x1c0 [ath9k] [<c0151b7e>] tasklet_action+0xbe/0x180 Cc: stable@kernel.org Cc: Senthil Balasubramanian <senthilb@qca.qualcomm.com> Cc: Rajkumar Manoharan <rmanohar@qca.qualcomm.com> Reported-by: Ashwin Mendonca <ashwinloyal@gmail.com> Tested-by: Ashwin Mendonca <ashwinloyal@gmail.com> Signed-off-by: Mohammed Shafi Shajakhan <mohammed@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-01-03net: fsl: fec: fix build for mx23-only kernelWolfram Sang1-2/+2
If one only selects mx23-based boards, compile fails: drivers/net/ethernet/freescale/fec.c:410:2: error: 'FEC_HASH_TABLE_HIGH' undeclared (first use in this function) drivers/net/ethernet/freescale/fec.c:411:2: error: 'FEC_HASH_TABLE_LOW' undeclared (first use in this function) This is because fec.h uses CONFIG_SOC_IMX28 to determine the register layout of the core which makes sense since the MX23 does not have a fec. However, Kconfig uses the broader ARCH_MXS symbol and this way even makes the fec-driver default for MX23. Adapt Kconfig to use the more precise SOC_IMX28 as well. Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> Cc: Fabio Estevam <fabio.estevam@freescale.com> Cc: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Cc: Shawn Guo <shawn.guo@linaro.org> Cc: David S. Miller <davem@davemloft.net> Acked-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-01-03drm/radeon/kms/atom: fix possible segfault in pm setupAlexander Müller1-1/+5
If we end up with no power states, don't look up current vddc. fixes: https://bugs.freedesktop.org/show_bug.cgi?id=44130 agd5f: fix patch formatting Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-01-03Merge branch 'devicetree/merge' of git://git.secretlab.ca/git/linux-2.6Linus Torvalds1-1/+1
* 'devicetree/merge' of git://git.secretlab.ca/git/linux-2.6: dt/device: Fix auxdata matching to handle entries without a name override
2012-01-02Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds2-0/+4
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: netfilter: ctnetlink: fix timeout calculation ipvs: try also real server with port 0 in backup server skge: restore rx multicast filter on resume and after config changes mlx4_en: nullify cq->vector field when closing completion queue
2011-12-31gspca: Fix falling back to lower isoc alt settingsMauro Carvalho Chehab1-1/+1
The current gspca core code has a regression where it no longer properly falls back to lower alt settings when there is not enough bandwidth. This causes many iso based usb-1 cameras to not work when plugged into a usb2 hub or a sandybridge chipset motherboard! This patch fixes this. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-12-31skge: restore rx multicast filter on resume and after config changesFlorian Zumbiehl1-0/+3
Restore skge hardware registers for multicast filtering to their appropriate values after system resume and after hardware restarts that are done when changing certain settings. Signed-off-by: Florian Zumbiehl <florz@florz.de> Acked-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-31mlx4_en: nullify cq->vector field when closing completion queueYevgeny Petrilin1-0/+1
Caused loss of connectivity when changing ring size. Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-31Merge branch 'fixes' of ↵Linus Torvalds1-4/+10
http://ftp.arm.linux.org.uk/pub/linux/arm/kernel/git-cur/linux-2.6-arm * 'fixes' of http://ftp.arm.linux.org.uk/pub/linux/arm/kernel/git-cur/linux-2.6-arm: ARM: 7237/1: PL330: Fix driver freeze ARM: 7197/1: errata: Remove SMP dependency for erratum 751472 ARM: 7196/1: errata: Remove SMP dependency for erratum 720789 ARM: 7220/1: mmc: mmci: Fixup error handling for dma ARM: 7214/1: mmc: mmci: Fixup handling of MCI_STARTBITERR
2011-12-31Merge branch 'fixes' of ↵Linus Torvalds1-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc * 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: ARM: plat-orion: make gpiochip label unique enable uncompress log on cpuimx35sd cpuimx35: fix touchscreen support cpuimx35sd: fix Kconfig clock-imx35: fix reboot in internal boot mode dma: MX3_IPU fix depends imx_v4_v5_defconfig: update default configuration cpuimx25sd: fix Kconfig arm/imx: fix cpufreq section mismatch ARM:imx:fix pwm period value ARM: OMAP: hwmod data: fix iva and mailbox hwmods for OMAP 3
2011-12-31Merge branch 'for-linus' of ↵Linus Torvalds2-5/+6
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: sentelic - fix retrieving number of buttons Input: sentelic - release mutex upon register write failure
2011-12-31Merge git://www.linux-watchdog.org/linux-watchdogLinus Torvalds4-7/+12
* git://www.linux-watchdog.org/linux-watchdog: watchdog: iTCO_wdt.c - problems with newer hardware due to SMI clearing (part 2) watchdog: hpwdt: Changes to handle NX secure bit in 32bit path watchdog: sp805: Fix section mismatch in ID table. watchdog: move coh901327 state holders
2011-12-30Merge branch 'iommu/fixes' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu * 'iommu/fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: iommu: Initialize domain->handler in iommu_domain_alloc()
2011-12-30random: Use arch_get_random_int instead of cycle counter if availLinus Torvalds1-2/+6
We still don't use rdrand in /dev/random, which just seems stupid. We accept the *cycle*counter* as a random input, but we don't accept rdrand? That's just broken. Sure, people can do things in user space (write to /dev/random, use rdrand in addition to /dev/random themselves etc etc), but that *still* seems to be a particularly stupid reason for saying "we shouldn't bother to try to do better in /dev/random". And even if somebody really doesn't trust rdrand as a source of random bytes, it seems singularly stupid to trust the cycle counter *more*. So I'd suggest the attached patch. I'm not going to even bother arguing that we should add more bits to the entropy estimate, because that's not the point - I don't care if /dev/random fills up slowly or not, I think it's just stupid to not use the bits we can get from rdrand and mix them into the strong randomness pool. Link: http://lkml.kernel.org/r/CA%2B55aFwn59N1=m651QAyTy-1gO1noGbK18zwKDwvwqnravA84A@mail.gmail.com Acked-by: "David S. Miller" <davem@davemloft.net> Acked-by: "Theodore Ts'o" <tytso@mit.edu> Acked-by: Herbert Xu <herbert@gondor.apana.org.au> Cc: Matt Mackall <mpm@selenic.com> Cc: Tony Luck <tony.luck@intel.com> Cc: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2011-12-30gspca: Fix bulk mode cameras no longer working (regression fix)Hans de Goede1-2/+2
The new iso bandwidth calculation code accidentally has broken support for bulk mode cameras. This has broken the following drivers: finepix, jeilinj, ovfx2, ov534, ov534_9, se401, sq905, sq905c, sq930x, stv0680, vicam. Thix patch fixes this. Fix tested with: se401, sq905, sq905c, stv0680 & vicam cams. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-12-29Input: sentelic - fix retrieving number of buttonsTai-hwa Liang2-3/+4
Fixing wrong register offset which is used to retrieve the number of buttons attached to the hardware. Signed-off-by: Tai-hwa Liang <avatar@sentelic.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-12-27watchdog: iTCO_wdt.c - problems with newer hardware due to SMI clearing (part 2)Wim Van Sebroeck1-3/+3
Redhat Bugzilla: Bug 727875 - TCO_EN bit is disabled by TCO driver The previous patch breaks reset watchdog behaviour on the older hardware. It is therefor better to make sure that the behaviour for older hardware (<=ICH5 or 6300ESB) is preserved and that the behaviour for newer hardware is changed. We therefor use the iTCO_version to see if we need the clearing of the SMI_TCO_EN bit in the SMI_EN register. So the new behaviour becomes: turn_SMI_watchdog_clear_off=0 -> Do not turn off SMI clearing watchdog. turn_SMI_watchdog_clear_off=1 -> Turn off SMI clearing watchdog when iTCO_version=1 (ICHO till ICH5 + 6300ESB only) turn_SMI_watchdog_clear_off=2 -> Turn off SMI clearing watchdog. Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2011-12-27drm/i915: Disable RC6 on Sandybridge by defaultKeith Packard1-5/+3
RC6 fails again. > I found my system freeze mostly during starting up X and KDE. Sometimes it > works for some minutes, sometimes it freezes immediatly. When the freeze > happens, everything is dead (even the reset button does not work, I need to > power cycle). > I disabled RC6, and my system runs wonderfully. > The system is a Z68 Pro board with Sandybridge i5-2500K processor, 8 > GB of RAM and UEFI firmware. Reported-by: Kai Krakow <hurikhan77@gmail.com> Signed-off-by: Keith Packard <keithp@keithp.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-12-27drm/i915: Disable semaphores by default on SNBKeith Packard1-2/+2
Semaphores still cause problems on some machines: > From Udo Steinberg: > > With Linux-3.2-rc6 I'm frequently seeing GPU hangs when large amounts of > text scroll in an xterm, such as when extracting a tar archive. Such as this > one (note the timestamps): > > I can reproduce it fairly easily with something > as simple as: > > while true; do dmesg; done This patch turns them off on SNB while leaving them on for IVB. Reported-by: Udo Steinberg <udo@hypervisor.org> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Eugeni Dodonov <eugeni@dodonov.net> Signed-off-by: Keith Packard <keithp@keithp.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-12-26watchdog: hpwdt: Changes to handle NX secure bit in 32bit pathMingarelli, Thomas1-1/+4
This patch makes use of the set_memory_x() kernel API in order to make necessary BIOS calls to source NMIs. This is needed for SLES11 SP2 and the latest upstream kernel as it appears the NX Execute Disable has grown in its control. Signed-off by: Thomas Mingarelli <thomas.mingarelli@hp.com> Signed-off by: Wim Van Sebroeck <wim@iguana.be> Cc: stable@kernel.org
2011-12-26watchdog: sp805: Fix section mismatch in ID table.Nick Bowler1-1/+1
The AMBA ID table is marked as __initdata, yet it is referenced by the driver struct which is not. This causes a (somewhat unhelpful) section mismatch warning: WARNING: drivers/watchdog/sp805_wdt.o(.data+0x4c): Section mismatch in reference from the variable sp805_wdt_driver to the (unknown reference) .init.data:(unknown) Fix this by removing the annotation. Signed-off-by: Nick Bowler <nbowler@elliptictech.com> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2011-12-26watchdog: move coh901327 state holdersLinus Walleij1-2/+4
The state holders used in the PM path of the drivers report as unused variables when compiling without CONFIG_PM so let's move them inside CONFIG_PM. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2011-12-25Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linuxLinus Torvalds2-3/+15
* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: vmwgfx: fix incorrect VRAM size check in vmw_kms_fb_create() drm/radeon/kms: bail on BTC parts if MC ucode is missing
2011-12-24Merge branch 'v4l_for_linus' of ↵Linus Torvalds2-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media * 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: [media] omap3isp: Fix crash caused by subdevs now having a pointer to devnodes
2011-12-23Input: sentelic - release mutex upon register write failureTai-hwa Liang1-2/+2
Make sure that mutex is released upon register writing failure. This fixes boot freezing observed on ARM based OLPC (http://dev.laptop.org/ticket/11357). Signed-off-by: Paul Fox <pgf@laptop.org> Signed-off-by: Tai-hwa Liang <avatar@sentelic.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-12-23Merge branch 'for-linus' of git://neil.brown.name/mdLinus Torvalds4-10/+13
* 'for-linus' of git://neil.brown.name/md: md/bitmap: It is OK to clear bits during recovery. md: don't give up looking for spares on first failure-to-add md/raid5: ensure correct assessment of drives during degraded reshape. md/linear: fix hot-add of devices to linear arrays.
2011-12-23md/bitmap: It is OK to clear bits during recovery.NeilBrown1-4/+1
commit d0a4bb492772ce5c4bdfba3744a99ed6f6fb238f introduced a regression which is annoying but fairly harmless. When writing to an array that is undergoing recovery (a spare in being integrated into the array), writing to the array will set bits in the bitmap, but they will not be cleared when the write completes. For bits covering areas that have not been recovered yet this is not a problem as the recovery will clear the bits. However bits set in already-recovered region will stay set and never be cleared. This doesn't risk data integrity. The only negatives are: - next time there is a crash, more resyncing than necessary will be done. - the bitmap doesn't look clean, which is confusing. While an array is recovering we don't want to update the 'events_cleared' setting in the bitmap but we do still want to clear bits that have very recently been set - providing they were written to the recovering device. So split those two needs - which previously both depended on 'success' and always clear the bit of the write went to all devices. Signed-off-by: NeilBrown <neilb@suse.de>
2011-12-23md: don't give up looking for spares on first failure-to-addNeilBrown1-2/+1
Before performing a recovery we try to remove any spares that might not be working, then add any that might have become relevant. Currently we abort on the first spare that cannot be added. This is a false optimisation. It is conceivable that - depending on rules in the personality - a subsequent spare might be accepted. Also the loop does other things like count the available spares and reset the 'recovery_offset' value. If we abort early these might not happen properly. So remove the early abort. In particular if you have an array what is undergoing recovery and which has extra spares, then the recovery may not restart after as reboot as the could of 'spares' might end up as zero. Reported-by: Anssi Hannula <anssi.hannula@iki.fi> Signed-off-by: NeilBrown <neilb@suse.de>
2011-12-23md/raid5: ensure correct assessment of drives during degraded reshape.NeilBrown1-4/+10
While reshaping a degraded array (as when reshaping a RAID0 by first converting it to a degraded RAID4) we currently get confused about which devices are in_sync. In most cases we get it right, but in the region that is being reshaped we need to treat non-failed devices as in-sync when we have the data but haven't actually written it out yet. Reported-by: Adam Kwolek <adam.kwolek@intel.com> Signed-off-by: NeilBrown <neilb@suse.de>
2011-12-23md/linear: fix hot-add of devices to linear arrays.NeilBrown1-0/+1
commit d70ed2e4fafdbef0800e73942482bb075c21578b broke hot-add to a linear array. After that commit, metadata if not written to devices until they have been fully integrated into the array as determined by saved_raid_disk. That patch arranged to clear that field after a recovery completed. However for linear arrays, there is no recovery - the integration is instantaneous. So we need to explicitly clear the saved_raid_disk field. Signed-off-by: NeilBrown <neilb@suse.de>
2011-12-23Merge branch 'usb-linus' of ↵Linus Torvalds4-8/+9
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb * 'usb-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: USB: Fix usb/isp1760 build on sparc usb: gadget: epautoconf: do not change number of streams usb: dwc3: core: fix cached revision on our structure usb: musb: fix reset issue with full speed device
2011-12-23Merge branch 'upstream-linus' of git://github.com/jgarzik/libata-devLinus Torvalds1-1/+1
* 'upstream-linus' of git://github.com/jgarzik/libata-dev: pata_of_platform: Add missing CONFIG_OF_IRQ dependency.
2011-12-23pata_of_platform: Add missing CONFIG_OF_IRQ dependency.David Miller1-1/+1
Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2011-12-22vmwgfx: fix incorrect VRAM size check in vmw_kms_fb_create()Xi Wang1-3/+3
Commit e133e737 didn't correctly fix the integer overflow issue. - unsigned int required_size; + u64 required_size; ... required_size = mode_cmd->pitch * mode_cmd->height; - if (unlikely(required_size > dev_priv->vram_size)) { + if (unlikely(required_size > (u64) dev_priv->vram_size)) { Note that both pitch and height are u32. Their product is still u32 and would overflow before being assigned to required_size. A correct way is to convert pitch and height to u64 before the multiplication. required_size = (u64)mode_cmd->pitch * (u64)mode_cmd->height; This patch calls the existing vmw_kms_validate_mode_vram() for validation. Signed-off-by: Xi Wang <xi.wang@gmail.com> Reviewed-and-tested-by: Thomas Hellstrom <thellstrom@vmware.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
generated by cgit v1.2.3 (git 2.39.0) at 2024-08-06 01:23:09 +0300