summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)AuthorFilesLines
2015-10-18Merge branch 'i2c/for-current' of ↵Linus Torvalds4-18/+42
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux Pull i2c fixes from Wolfram Sang: "Here are some bugfixes for the I2C subsystem. Kieran found a flaw in the recently renewed wake irq handling. Mika handled a user bug report where the ACPI info turned out to be unusable. I updated MAINTAINERS so that such bug reports will sooner get to the right people. Geert pointed me to a problem of some i2c drivers regarding PM which I fixed" * 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: i2c: designware: Do not use parameters from ACPI on Dell Inspiron 7348 MAINTAINERS: add maintainers for Synopsis Designware I2C drivers i2c: designware-platdrv: enable RuntimePM before registering to the core i2c: s3c2410: enable RuntimePM before registering to the core i2c: rcar: enable RuntimePM before registering to the core i2c: return probe deferred status on dev_pm_domain_attach
2015-10-18i2c: designware: Do not use parameters from ACPI on Dell Inspiron 7348Mika Westerberg1-0/+20
ACPI SSCN/FMCN methods were originally added because then the platform can provide the most accurate HCNT/LCNT values to the driver. However, this seems not to be true for Dell Inspiron 7348 where using these causes the touchpad to fail in boot: i2c_hid i2c-DLL0675:00: failed to retrieve report from device. i2c_designware INT3433:00: i2c_dw_handle_tx_abort: lost arbitration i2c_hid i2c-DLL0675:00: failed to retrieve report from device. i2c_designware INT3433:00: controller timed out The values received from ACPI are (in fast mode): HCNT: 72 LCNT: 160 this translates to following timings (input clock is 100MHz on Broadwell): tHIGH: 720 ns (spec min 600 ns) tLOW: 1600 ns (spec min 1300 ns) Bus period: 2920 ns (assuming 300 ns tf and tr) Bus speed: 342.5 kHz Both tHIGH and tLOW are within the I2C specification. The calculated values when ACPI parameters are not used are (in fast mode): HCNT: 87 LCNT: 159 which translates to: tHIGH: 870 ns (spec min 600 ns) tLOW: 1590 ns (spec min 1300 ns) Bus period 3060 ns (assuming 300 ns tf and tr) Bus speed 326.8 kHz These values are also within the I2C specification. Since both ACPI and calculated values meet the I2C specification timing requirements it is hard to say why the touchpad does not function properly with the ACPI values except that the bus speed is higher in this case (but still well below the max 400kHz). Solve this by adding DMI quirk to the driver that disables using ACPI parameters on this particulare machine. Reported-by: Pavel Roskin <plroskin@gmail.com> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Tested-by: Pavel Roskin <plroskin@gmail.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de> Cc: stable@kernel.org
2015-10-17Merge branches 'irq-urgent-for-linus' and 'timers-urgent-for-linus' of ↵Linus Torvalds1-0/+4
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull irq/timer fixes from Thomas Gleixner: "irq: a fix for the new hierarchical MSI interrupt handling which unbreaks PCI=n configurations. timers: a fix for the new hrtimer clock offset update mechanism to ensure that the boot time offset is respected" * 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: genirq/msi: Do not use pci_msi_[un]mask_irq as default methods * 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: timekeeping: Increment clock_was_set_seq in timekeeping_init()
2015-10-17Merge branch 'for-linus' of ↵Linus Torvalds2-9/+9
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input fixes from Dmitry Torokhov: "Just two small fixups to ads7846 touchscreen controller driver and Cypress touchpad driver" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: cyapa - fix the copy paste error on electrodes_rx value Input: ads7846 - correct the value got from SPI
2015-10-17Merge tag 'clk-fixes-for-linus' of ↵Linus Torvalds1-1/+3
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull clk fix from Stephen Boyd: "Just one revert for Armada XP devices: the conversion to of_clk_get_parent_name() wasn't a direct translation, so we revert back to of_clk_get() + __clk_get_name(). We could make of_clk_get_parent_name() more robust, but that may have unintended side-effects, so we'll do that in the next version" * tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: Partially revert "clk: mvebu: Convert to clk_hw based provider APIs"
2015-10-16Merge tag 'dm-4.3-fixes-3' of ↵Linus Torvalds2-4/+13
git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm Pull device mapper fixes from Mike Snitzer: "Two DM target error path cleanup fixes (one for stable in DM thinp and one for a v4.3-rc5 thinko in DM snapshot)" * tag 'dm-4.3-fixes-3' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm: dm thin: fix missing pool reference count decrement in pool_ctr error path dm snapshot persistent: fix missing cleanup in persistent_ctr error path
2015-10-16Merge branch 'for-linus' of ↵Linus Torvalds1-2/+8
git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client Pull Ceph fixes from Sage Weil: "Just two small items from Ilya: The first patch fixes the RBD readahead to grab full objects. The second fixes the write ops to prevent undue promotion when a cache tier is configured on the server side" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client: rbd: use writefull op for object size writes rbd: set max_sectors explicitly
2015-10-16Merge tag 'pm+acpi-4.3-rc6' of ↵Linus Torvalds7-49/+21
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management and ACPI fixes from Rafael Wysocki: "These fix two recent regressions (ACPICA, the generic power domains framework) and one crash that may happen on specific hardware supported since 4.1 (intel_pstate). Specifics: - Fix a regression introduced by a recent ACPICA cleanup that uncovered a latent bug (Lv Zheng). - Fix a recent regression in the generic power domains framework that may cause it to violate PM QoS latency constraints in some cases (Ulf Hansson). - Fix an intel_pstate driver crash on the Knights Landing chips that do not update the MPERF counter as often as expected by the driver which may result in a divide by 0 (Srinivas Pandruvada)" * tag 'pm+acpi-4.3-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: cpufreq: intel_pstate: Fix divide by zero on Knights Landing (KNL) ACPICA: Tables: Fix FADT dependency regression PM / Domains: Fix validation of latency constraints in genpd governor
2015-10-16Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linuxLinus Torvalds10-15/+98
Pull drm fixes from Dave Airlie: "Nothing too crazy or exciting: - two MAINTAINERS entries that I didn't see the point in delaying. - one drm mst fix to stop sending uninitialised data to monitors - two amdgpu fixes - one radeon mst tiling fix - one vmwgfx regression fix - one virtio warning fix. I have found one locking problem that needs a bit of reorg to fix, but I'm not sure it's worth putting in -fixes as I don't think we've seen it hit in the real world ever, I just found it using the virtio-gpu driver when working on it. I'll possibly send it next week once I've time to discuss with Daniel" * 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: drm/virtio: use %llu format string form atomic64_t MAINTAINERS: Add myself as maintainer for the gma500 driver MAINTAINERS: add a maintainer for the atmel-hlcdc DRM driver drm/amdgpu: Keep the pflip interrupts always enabled v7 drm/amdgpu: adjust default dispclk (v2) drm/dp/mst: make mst i2c transfer code more robust. drm/radeon: attach tile property to mst connector drm/vmwgfx: Fix kernel NULL pointer dereference on older hardware
2015-10-16Merge tag 'powerpc-4.3-4' of ↵Linus Torvalds7-7/+45
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc fixes from Michael Ellerman: - Re-enable CONFIG_SCSI_DH in our defconfigs - Remove unused os_area_db_id_video_mode - cxl: fix leak of IRQ names in cxl_free_afu_irqs() from Andrew - cxl: fix leak of ctx->irq_bitmap when releasing context via kernel API from Andrew - cxl: fix leak of ctx->mapping when releasing kernel API contexts from Andrew - cxl: Workaround malformed pcie packets on some cards from Philippe - cxl: Fix number of allocated pages in SPA from Christophe Lombard - Fix checkstop in native_hpte_clear() with lockdep from Cyril - Panic on unhandled Machine Check on powernv from Daniel - selftests/powerpc: Fix build failure of load_unaligned_zeropad test * tag 'powerpc-4.3-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: selftests/powerpc: Fix build failure of load_unaligned_zeropad test powerpc/powernv: Panic on unhandled Machine Check powerpc: Fix checkstop in native_hpte_clear() with lockdep cxl: Fix number of allocated pages in SPA cxl: Workaround malformed pcie packets on some cards cxl: fix leak of ctx->mapping when releasing kernel API contexts cxl: fix leak of ctx->irq_bitmap when releasing context via kernel API cxl: fix leak of IRQ names in cxl_free_afu_irqs() powerpc/ps3: Remove unused os_area_db_id_video_mode powerpc/configs: Re-enable CONFIG_SCSI_DH
2015-10-16Merge branch 'akpm' (patches from Andrew)Linus Torvalds1-1/+1
Merge misc fixes from Andrew Morton: "6 fixes" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: sh: add copy_user_page() alias for __copy_user() lib/Kconfig: ZLIB_DEFLATE must select BITREVERSE mm, dax: fix DAX deadlocks memcg: convert threshold to bytes builddeb: remove debian/files before build mm, fs: obey gfp_mapping for add_to_page_cache()
2015-10-16mm, fs: obey gfp_mapping for add_to_page_cache()Michal Hocko1-1/+1
Commit 6afdb859b710 ("mm: do not ignore mapping_gfp_mask in page cache allocation paths") has caught some users of hardcoded GFP_KERNEL used in the page cache allocation paths. This, however, wasn't complete and there were others which went unnoticed. Dave Chinner has reported the following deadlock for xfs on loop device: : With the recent merge of the loop device changes, I'm now seeing : XFS deadlock on my single CPU, 1GB RAM VM running xfs/073. : : The deadlocked is as follows: : : kloopd1: loop_queue_read_work : xfs_file_iter_read : lock XFS inode XFS_IOLOCK_SHARED (on image file) : page cache read (GFP_KERNEL) : radix tree alloc : memory reclaim : reclaim XFS inodes : log force to unpin inodes : <wait for log IO completion> : : xfs-cil/loop1: <does log force IO work> : xlog_cil_push : xlog_write : <loop issuing log writes> : xlog_state_get_iclog_space() : <blocks due to all log buffers under write io> : <waits for IO completion> : : kloopd1: loop_queue_write_work : xfs_file_write_iter : lock XFS inode XFS_IOLOCK_EXCL (on image file) : <wait for inode to be unlocked> : : i.e. the kloopd, with it's split read and write work queues, has : introduced a dependency through memory reclaim. i.e. that writes : need to be able to progress for reads make progress. : : The problem, fundamentally, is that mpage_readpages() does a : GFP_KERNEL allocation, rather than paying attention to the inode's : mapping gfp mask, which is set to GFP_NOFS. : : The didn't used to happen, because the loop device used to issue : reads through the splice path and that does: : : error = add_to_page_cache_lru(page, mapping, index, : GFP_KERNEL & mapping_gfp_mask(mapping)); This has changed by commit aa4d86163e4 ("block: loop: switch to VFS ITER_BVEC"). This patch changes mpage_readpage{s} to follow gfp mask set for the mapping. There are, however, other places which are doing basically the same. lustre:ll_dir_filler is doing GFP_KERNEL from the function which apparently uses GFP_NOFS for other allocations so let's make this consistent. cifs:readpages_get_pages is called from cifs_readpages and __cifs_readpages_from_fscache called from the same path obeys mapping gfp. ramfs_nommu_expand_for_mapping is hardcoding GFP_KERNEL as well regardless it uses mapping_gfp_mask for the page allocation. ext4_mpage_readpages is the called from the page cache allocation path same as read_pages and read_cache_pages As I've noticed in my previous post I cannot say I would be happy about sprinkling mapping_gfp_mask all over the place and it sounds like we should drop gfp_mask argument altogether and use it internally in __add_to_page_cache_locked that would require all the filesystems to use mapping gfp consistently which I am not sure is the case here. From a quick glance it seems that some file system use it all the time while others are selective. Signed-off-by: Michal Hocko <mhocko@suse.com> Reported-by: Dave Chinner <david@fromorbit.com> Cc: "Theodore Ts'o" <tytso@mit.edu> Cc: Ming Lei <ming.lei@canonical.com> Cc: Andreas Dilger <andreas.dilger@intel.com> Cc: Oleg Drokin <oleg.drokin@intel.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Christoph Hellwig <hch@lst.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-10-16rbd: use writefull op for object size writesIlya Dryomov1-2/+7
This covers only the simplest case - an object size sized write, but it's still useful in tiering setups when EC is used for the base tier as writefull op can be proxied, saving an object promotion. Even though updating ceph_osdc_new_request() to allow writefull should just be a matter of fixing an assert, I didn't do it because its only user is cephfs. All other sites were updated. Reflects ceph.git commit 7bfb7f9025a8ee0d2305f49bf0336d2424da5b5b. Signed-off-by: Ilya Dryomov <idryomov@gmail.com> Reviewed-by: Alex Elder <elder@linaro.org>
2015-10-16rbd: set max_sectors explicitlyIlya Dryomov1-0/+1
Commit 30e2bc08b2bb ("Revert "block: remove artifical max_hw_sectors cap"") restored a clamp on max_sectors. It's now 2560 sectors instead of 1024, but it's not good enough: we set max_hw_sectors to rbd object size because we don't want object sized I/Os to be split, and the default object size is 4M. So, set max_sectors to max_hw_sectors in rbd at queue init time. Signed-off-by: Ilya Dryomov <idryomov@gmail.com> Reviewed-by: Alex Elder <elder@linaro.org>
2015-10-16Merge branches 'acpica', 'pm-domains' and 'pm-cpufreq'Rafael J. Wysocki7-49/+21
* acpica: ACPICA: Tables: Fix FADT dependency regression * pm-domains: PM / Domains: Fix validation of latency constraints in genpd governor * pm-cpufreq: cpufreq: intel_pstate: Fix divide by zero on Knights Landing (KNL)
2015-10-16genirq/msi: Do not use pci_msi_[un]mask_irq as default methodsMarc Zyngier1-0/+4
When we create a generic MSI domain, that MSI_FLAG_USE_DEF_CHIP_OPS is set, and that any of .mask or .unmask are NULL in the irq_chip structure, we set them to pci_msi_[un]mask_irq. This is a bad idea for at least two reasons: - PCI_MSI might not be selected, kernel fails to build (yes, this is legitimate, at least on arm64!) - This may not be a PCI/MSI domain at all (platform MSI, for example) Either way, this looks wrong. Move the overriding of mask/unmask to the PCI counterpart, and panic is any of these two methods is not set in the core code (they really should be present). Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Cc: Jiang Liu <jiang.liu@linux.intel.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Link: http://lkml.kernel.org/r/1444760085-27857-1-git-send-email-marc.zyngier@arm.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-10-16drm/virtio: use %llu format string form atomic64_tArnd Bergmann2-3/+3
The virtgpu driver prints the last_seq variable using the %ld or %lu format string, which does not work correctly on all architectures and causes this compiler warning on ARM: drivers/gpu/drm/virtio/virtgpu_fence.c: In function 'virtio_timeline_value_str': drivers/gpu/drm/virtio/virtgpu_fence.c:64:22: warning: format '%lu' expects argument of type 'long unsigned int', but argument 4 has type 'long long int' [-Wformat=] snprintf(str, size, "%lu", atomic64_read(&fence->drv->last_seq)); ^ drivers/gpu/drm/virtio/virtgpu_debugfs.c: In function 'virtio_gpu_debugfs_irq_info': drivers/gpu/drm/virtio/virtgpu_debugfs.c:37:16: warning: format '%ld' expects argument of type 'long int', but argument 3 has type 'long long int' [-Wformat=] seq_printf(m, "fence %ld %lld\n", ^ In order to avoid the warnings, this changes the format strings to %llu and adds a cast to u64, which makes it work the same way everywhere. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Dave Airlie <airlied@redhat.com>
2015-10-16Merge branch 'drm-fixes-4.3' of git://people.freedesktop.org/~agd5f/linux ↵Dave Airlie5-10/+90
into drm-fixes Just two fixes for amdgpu: - fix pageflip interrupt issue - fix display clock handling on certain fiji boards * 'drm-fixes-4.3' of git://people.freedesktop.org/~agd5f/linux: drm/amdgpu: Keep the pflip interrupts always enabled v7 drm/amdgpu: adjust default dispclk (v2)
2015-10-16Merge tag 'vmwgfx-fixes-4.3-151014' of ↵Dave Airlie1-1/+2
git://people.freedesktop.org/~thomash/linux into drm-fixes Pull request of 2015-10-14 * tag 'vmwgfx-fixes-4.3-151014' of git://people.freedesktop.org/~thomash/linux: drm/vmwgfx: Fix kernel NULL pointer dereference on older hardware
2015-10-15Merge tag 'pinctrl-v4.3-3' of ↵Linus Torvalds3-115/+117
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl Pull pinctrl fixes from Linus Walleij: "Here are some overdue (what can I say, I was on a short vacation) driver fixes for the pin control subsystem: - Allwinner sun5i A10s had a faulty mapping - Freescale i.MX25 had some bad arithmetics - Uniphier PH1-sLD8 missed some input enable settings" * tag 'pinctrl-v4.3-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: pinctrl: uniphier: fix input enable settings for PH1-sLD8 pinctrl: imx25: ensure that a pin with id i is at position i in the info array pinctrl: sun5i: Fix a10s pwm1 pinctrl mapping
2015-10-15cpufreq: intel_pstate: Fix divide by zero on Knights Landing (KNL)Srinivas Pandruvada1-0/+5
This is a workaround for KNL platform, where in some cases MPERF counter will not have updated value before next read of MSR_IA32_MPERF. In this case divide by zero will occur. This change ignores current sample for busy calculation in this case. Fixes: b34ef932d79a (intel_pstate: Knights Landing support) Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Acked-by: Kristen Carlson Accardi <kristen@linux.intel.com> Cc: 4.1+ <stable@vger.kernel.org> # 4.1+ Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-10-15Merge tag 'for-linus' of ↵Linus Torvalds29-89/+478
git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma Pull rdma updates from Doug Ledford: "We have four batched up patches for the current rc kernel. Two of them are small fixes that are obvious. One of them is larger than I would like for a late stage rc pull, but we found an issue in the namespace lookup code related to RoCE and this works around the issue for now (we allow a lookup with a namespace to succeed on RoCE since RoCE namespaces aren't implemented yet). This will go away in 4.4 when we put in support for namespaces in RoCE devices. The last one is large in terms of lines, but is all legal and no functional changes. Cisco needed to update their files to be more specific about their license. They had intended the files to be dual licensed as GPL/BSD all along, and specified that in their module license tag, but their file headers were not up to par. They contacted all of the contributors to get agreement and then submitted a patch to update the license headers in the files. Summary: - Work around connection namespace lookup bug related to RoCE - Change usnic license to Dual GPL/BSD (was intended to be that way all along, but wasn't clear, permission from contributors was chased down) - Fix an issue between NFSoRDMA and mlx5 that could cause an oops - Fix leak of sendonly multicast groups" * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma: IB/ipoib: For sendonly join free the multicast group on leave IB/cma: Accept connection without a valid netdev on RoCE xprtrdma: Don't require LOCAL_DMA_LKEY support for fastreg usnic: add missing clauses to BSD license
2015-10-15drm/amdgpu: Keep the pflip interrupts always enabled v7Michel Dänzer4-8/+84
This fixes flickering issues caused by prematurely firing pflip interrupts. v2 (chk): add commit message, fix DCE V10/V11 and DM as well v3: Re-enable pflip interrupt wherever we re-enable a CRTC v4: Enable pflip interrupt in DAL as well v5: drop DAL changes for upstream v6: (agd): only enable interrupts on crtcs that exist v7: (agd): integrate suggestions from Michel Signed-off-by: Michel Dänzer <michel.daenzer@amd.com> Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2015-10-15drm/amdgpu: adjust default dispclk (v2)Alex Deucher1-2/+6
Set the default to 600Mhz if it's not set in the bios, and bump the default to 600Mhz if it's lower than that. Port of radeon commit: 9368931db826d57b6b88b3145a00276626b48df0 v2: clean up the code a bit bug: https://bugs.freedesktop.org/show_bug.cgi?id=91896 Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2015-10-15i2c: designware-platdrv: enable RuntimePM before registering to the coreWolfram Sang1-6/+7
The core may register clients attached to this master which may use funtionality from the master. So, RuntimePM must be enabled before, otherwise this will fail. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Cc: stable@kernel.org
2015-10-15i2c: s3c2410: enable RuntimePM before registering to the coreWolfram Sang1-3/+5
The core may register clients attached to this master which may use funtionality from the master. So, RuntimePM must be enabled before, otherwise this will fail. While here, move drvdata, too. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Tested-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Acked-by: Kukjin Kim <kgene@kernel.org> Signed-off-by: Wolfram Sang <wsa@the-dreams.de> Cc: stable@kernel.org
2015-10-15i2c: rcar: enable RuntimePM before registering to the coreWolfram Sang1-3/+4
The core may register clients attached to this master which may use funtionality from the master. So, RuntimePM must be enabled before, otherwise this will fail. While here, move drvdata, too. Reported-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de> Cc: stable@kernel.org
2015-10-15i2c: return probe deferred status on dev_pm_domain_attachKieran Bingham1-6/+6
A change of return status was introduced in commit 3fffd1283927 ("i2c: allow specifying separate wakeup interrupt in device tree") The commit prevents the defer status being passed up the call stack appropriately when dev_pm_domain_attach returns -EPROBE_DEFER. Catch the PROBE_DEFER and clear up the IRQ wakeup status Signed-off-by: Kieran Bingham <kieranbingham@gmail.com> Fixes: 3fffd1283927 ("i2c: allow specifying separate wakeup interrupt in device tree") Reviewed-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2015-10-15drm/dp/mst: make mst i2c transfer code more robust.Dave Airlie1-1/+2
This zeroes the msg so no random stack data ends up getting sent, it also limits the function to not accepting > 4 i2c msgs. Cc: stable@vger.kernel.org Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Dave Airlie <airlied@redhat.com>
2015-10-15drm/radeon: attach tile property to mst connectorDave Airlie1-0/+1
This allows tiled monitors to work with radeon once mst is enabled. Cc: stable@vger.kernel.org Signed-off-by: Dave Airlie <airlied@redhat.com>
2015-10-14ACPICA: Tables: Fix FADT dependency regressionLv Zheng5-33/+10
Some logics actually relying on the existence of FADT, currently relies on the number of loaded tables. This false dependency can easily trigger regressions. One of them has been introduced by commit 8ec3f459073e (ACPICA: Tables: Fix global table list issues by removing fixed table). The commit changing the fixed table indexes results in the change of FADT table index, originally, it was 3 (thus the installed table count should be greater than 4), while currently it is 0 (and the installed table count may be 3). This patch fixes this regression by cleaning up the code. Lv Zheng. Link: https://bugzilla.kernel.org/show_bug.cgi?id=105351 Fixes: 8ec3f459073e (ACPICA: Tables: Fix global table list issues by removing fixed table) Reported-and-tested-by: Meelis Roos <mroos@linux.ee> Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-10-14Partially revert "clk: mvebu: Convert to clk_hw based provider APIs"Stephen Boyd1-1/+3
This partially reverts commit eca61c9ff2588e1df373e61078e1874976315839. Thomas reports that it causes regressions on Armada XP devices. This is because of_clk_get_parent_name() relies on the property 'clock-output-names' to resolve the name of a clock's parent, without trying to get the clock from the framework and call __clk_get_name(). Given that Armada XP devices don't have the 'clock-output-names' property, of_clk_get_parent_name() returns the name of the node which doesn't match the actual parent clock's name at all, causing CPU clocks to never link up with their parents. Reported-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-10-14Merge tag 'mfd-fixes-4.3' of ↵Linus Torvalds2-1/+3
git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd Pull MFD fixes from Lee Jones: "Bug Fixes: - Return correct error code i.e. not zero - Fix build error when !CONFIG_PM_SLEEP" * tag 'mfd-fixes-4.3' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: mfd: max77843: Fix max77843_chg_init() return on error mfd: intel-lpss: Fix build error when !CONFIG_PM_SLEEP
2015-10-14Input: cyapa - fix the copy paste error on electrodes_rx valueDudley Du1-7/+3
Fix the copy paste error on the electrodes_rx value set code which will cause the electrodes_rx value be always set to the value of electrodes_y. Reported-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com> Signed-off-by: Dudley Du <dudl@cypress.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-10-14PM / Domains: Fix validation of latency constraints in genpd governorUlf Hansson1-16/+6
Commit ba2bbfbf6307 (PM / Domains: Remove intermediate states from the power off sequence) changed the power off sequence in genpd. That also required some updates regarding the validation of latency constraints in the genpd governor. Unfortunate that wasn't covered, so let's fix this. From a runtime PM and latency point of view, we need to consider the worst case scenario while validating latency constraints. That's typically when a call to pm_runtime_get_sync() needs to wait for a ongoing runtime suspend operation to be carried out, as it then also needs to wait for the device to be runtime resumed again. The above mentioned commit made the genpd governor's ->stop_ok() callback responsible of validating genpd's device's runtime suspend/resume latency. In other words, the constraint needs to be validated towards the relevant latencies present in genpd's ->runtime_suspend|resume() callbacks. Earlier, that included latencies from the ->stop|start() callbacks, but as ->save|restore_state() are now also being invoked from genpd's ->runtime_suspend|resume() and to comply with the worst case scenario, let's take also those latencies into account. Fixes: ba2bbfbf6307 (PM / Domains: Remove intermediate states from the power off sequence) Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-10-13IB/ipoib: For sendonly join free the multicast group on leaveChristoph Lameter3-2/+5
When we leave the multicast group on expiration of a neighbor we do not free the mcast structure. This results in a memory leak that causes ib_dealloc_pd to fail and print a WARN_ON message and backtrace. Fixes: bd99b2e05c4d (IB/ipoib: Expire sendonly multicast joins) Signed-off-by: Christoph Lameter <cl@linux.com> Tested-by: Sagi Grimberg <sagig@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-10-13Merge tag 'iommu-fixes-v4.3-rc5' of ↵Linus Torvalds6-19/+42
git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu Pull IOMMU fixes from Joerg Roedel: "A few fixes piled up: - Fix for a suspend/resume issue where PCI probing code overwrote dev->irq for the MSI irq of the AMD IOMMU. - Fix for a kernel crash when a 32 bit PCI device was assigned to a KVM guest. - Fix for a possible memory leak in the VT-d driver - A couple of fixes for the ARM-SMMU driver" * tag 'iommu-fixes-v4.3-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: iommu/amd: Fix NULL pointer deref on device detach iommu/amd: Prevent binding other PCI drivers to IOMMU PCI devices iommu/vt-d: Fix memory leak in dmar_insert_one_dev_info() iommu/arm-smmu: Use correct address mask for CMD_TLBI_S2_IPA iommu/arm-smmu: Ensure IAS is set correctly for AArch32-capable SMMUs iommu/io-pgtable-arm: Don't use dma_to_phys()
2015-10-13Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linuxLinus Torvalds29-94/+219
Pull drm fixes from Dave Airlie: "I got a bit behind last week, so here is a delayed fixes pull: - a bunch of radeon/amd gpu fixes - some nouveau regression fixes (ppc bios reading and runtime pm fix) - one drm core oops fix - two qxl locking fixes - one qxl regression fix" * 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: drm/nouveau/bios: fix OF loading drm/nouveau/fbcon: take runpm reference when userspace has an open fd drm/nouveau/nouveau: Disable AGP for SiS 761 drm/nouveau/display: allow up to 16k width/height for fermi+ drm/nouveau/bios: translate devinit pri/sec i2c bus to internal identifiers drm: Fix locking for sysfs dpms file drm/amdgpu: fix memory leak in amdgpu_vm_update_page_directory drm/amdgpu: fix 32-bit compiler warning drm/qxl: avoid dependency lock drm/qxl: avoid buffer reservation in qxl_crtc_page_flip drm/qxl: fix framebuffer dirty rectangle tracking. drm/amdgpu: flag iceland as experimental drm/amdgpu: check before checking pci bridge registers drm/amdgpu: fix num_crtc on CZ drm/amdgpu: restore the fbdev mode in lastclose drm/radeon: restore the fbdev mode in lastclose drm/radeon: add quirk for ASUS R7 370 drm/amdgpu: add pm sysfs files late drm/radeon: add pm sysfs files late
2015-10-13dm thin: fix missing pool reference count decrement in pool_ctr error pathMike Snitzer1-1/+1
Fixes: ac8c3f3df ("dm thin: generate event when metadata threshold passed") Signed-off-by: Mike Snitzer <snitzer@redhat.com> Cc: stable@vger.kernel.org # 3.10+
2015-10-13dm snapshot persistent: fix missing cleanup in persistent_ctr error pathSudip Mukherjee1-3/+12
If an unsupported option is given then the early return from persistent_ctr() leaked memory allocated for the 'pstore' and never destroyed the 'metadata_wq'. Fixes: b0d3cc011e53 ("dm snapshot: add new persistent store option to support overflow") Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2015-10-13drm/vmwgfx: Fix kernel NULL pointer dereference on older hardwareThomas Hellstrom1-1/+2
The commit "drm/vmwgfx: Fix up user_dmabuf refcounting", while fixing a kernel crash introduced a NULL pointer dereference on older hardware. Fix this. Cc: <stable@vger.kernel.org> Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> Reviewed-by: Sinclair Yeh <syeh@vmware.com> Reviewed-by: Brian Paul <brianp@vmware.com>
2015-10-12Merge branch 'linux-4.3' of ↵Dave Airlie7-14/+77
git://anongit.freedesktop.org/git/nouveau/linux-2.6 into drm-fixes Nothing too crazy here, a couple of regression fixes + runpm/fbcon race fix. * 'linux-4.3' of git://anongit.freedesktop.org/git/nouveau/linux-2.6: drm/nouveau/bios: fix OF loading drm/nouveau/fbcon: take runpm reference when userspace has an open fd drm/nouveau/nouveau: Disable AGP for SiS 761 drm/nouveau/display: allow up to 16k width/height for fermi+ drm/nouveau/bios: translate devinit pri/sec i2c bus to internal identifiers
2015-10-12drm/nouveau/bios: fix OF loadingIlia Mirkin3-11/+36
Currently OF bios load fails for a few reasons: - checksum failure - bios size too small - no PCIR header - bios length not a multiple of 4 In this change, we resolve all of the above by ignoring any checksum failures (since OF VBIOS tends not to have a checksum), and faking the PCIR data when loading from OF. Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2015-10-12drm/nouveau/fbcon: take runpm reference when userspace has an open fdBen Skeggs1-0/+24
We need to do this in order to prevent accesses to the device while it's powered down. Userspace may have an mmap of the fb, and there's no good way (that I know of) to prevent it from touching the device otherwise. This fixes some nasty races between runpm and plymouth on some systems, which result in the GPU getting very upset and hanging the boot. Signed-off-by: Ben Skeggs <bskeggs@redhat.com> Cc: stable@vger.kernel.org
2015-10-12drm/nouveau/nouveau: Disable AGP for SiS 761Ondrej Zary1-2/+6
SiS 761 chipset does not support AGP cards but has AGP capability (for the onboard video). At least PC Chips A31G board using this chipset has an AGP-like AGPro slot that's wired to the PCI bus. Enabling AGP will fail (GPU lockup and software fbcon, X11 hangs). Add support for matching just the host bridge in nvkm_device_agp_quirks and add entry for SiS 761 with mode 0 (AGP disabled). Signed-off-by: Ondrej Zary <linux@rainbow-software.org> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2015-10-12drm/nouveau/display: allow up to 16k width/height for fermi+Ilia Mirkin1-1/+5
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2015-10-12drm/nouveau/bios: translate devinit pri/sec i2c bus to internal identifiersBen Skeggs1-0/+6
fdo#92013. Regression from "i2c: transition pad/ports away from being based on nvkm_object" Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2015-10-11Merge tag 'scsi-fixes' of ↵Linus Torvalds3-14/+33
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull SCSI fixes from James Bottomley: "This is a set of three bug fixes, two of which are regressions from recent updates (the 3ware one from 4.1 and the device handler fixes from 4.2)" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: 3w-9xxx: don't unmap bounce buffered commands scsi_dh: Use the correct module name when loading device handler libiscsi: Fix iscsi_check_transport_timeouts possible infinite loop
2015-10-11Merge tag 'md/4.3-rc4-fix' of git://neil.brown.name/mdLinus Torvalds2-4/+4
Pull md bugfix from Neil Brown: "One bug fix for raid1/raid10. Very careless bug earler in 4.3-rc, now fixed :-)" * tag 'md/4.3-rc4-fix' of git://neil.brown.name/md: crash in md-raid1 and md-raid10 due to incorrect list manipulation
2015-10-10Merge tag 'usb-4.3-rc5' of ↵Linus Torvalds7-3/+41
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB fixes from Greg KH: "Here are some small USB and PHY fixes and quirk updates for 4.3-rc5. Nothing major here, full details in the shortlog, and all of these have been in linux-next for a while" * tag 'usb-4.3-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: usb: Add device quirk for Logitech PTZ cameras USB: chaoskey read offset bug USB: Add reset-resume quirk for two Plantronics usb headphones. usb: renesas_usbhs: Add support for R-Car H3 usb: renesas_usbhs: fix build warning if 64-bit architecture usb: gadget: bdc: fix memory leak phy: berlin-sata: Fix module autoload for OF platform driver phy: rockchip-usb: power down phy when rockchip phy probe phy: qcom-ufs: fix build error when the component is built as a module