summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)AuthorFilesLines
2006-12-03[NET]: Split skb->csumAl Viro9-10/+10
... into anonymous union of __wsum and __u32 (csum and csum_offset resp.) Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-12-03[BNX2]: Update version and rel date.Michael Chan1-2/+2
Update version to 1.5.1. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-12-03[BNX2]: Add 5709 PCI ID.Michael Chan1-2/+11
Add PCI ID and detection for 5709 copper and SerDes chips. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-12-03[BNX2]: Download 5709 firmware.Michael Chan1-4/+38
Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-12-03[BNX2]: New firmware to support 5709 (part 4).Michael Chan1-0/+1037
Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-12-03[BNX2]: New firmware to support 5709 (part 3).Michael Chan1-0/+712
Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-12-03[BNX2]: New firmware to support 5709 (part 2).Michael Chan1-0/+1259
Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-12-03[BNX2]: New firmware to support 5709 (part 1).Michael Chan1-0/+1078
Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-12-03[BNX2]: Add 5709 reset and runtime code.Michael Chan1-24/+37
Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-12-03[BNX2]: Add 5709 init code.Michael Chan1-37/+130
Add basic support to initialize the 5709 chip. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-12-03[BNX2]: Add new 5709 registers (part 2).Michael Chan1-22/+1410
Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-12-03[BNX2]: Add new 5709 registers (part 1).Michael Chan1-146/+1311
Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-12-03[BNX2]: Re-organize firmware structures.Michael Chan3-218/+187
Re-organize the firmware handling code and declarations a bit to make the code more compact. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-12-03[BNX2]: Remove udelay() in copper PHY code.Michael Chan1-7/+6
Change a long udelay() in bnx2_setup_copper_phy() to msleep(). Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-12-03[BNX2]: Add 5708S parallel detection.Michael Chan2-21/+57
Add code to parallel detect 1Gbps and 2.5Gbps link speeds. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-12-03[BNX2]: Add bnx2_5706_serdes_timer().Michael Chan1-56/+55
Separate the 5706S SerDes handling code in bnx2_timer() and put it in a new function. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-12-03[BNX2]: Improve SerDes handling.Michael Chan2-21/+41
1. Add support for 2.5Gbps forced speed setting. 2. Remove a long udelay() loop and change to msleep(). 3. Other misc. SerDes fixes. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-12-03[BNX2]: Fix Xen problem.Michael Chan2-381/+691
This fixes the problem of not receiving packets in the Xen bridging environment. The Xen script sets the device's MAC address to FE:FF:FF:FF:FF:FF and puts the device in promiscuous mode. The firmware had problem receiving all packets in this configuration. New firmware and setting the PROM_VLAN bit when in promiscuous mode will fix this problem. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-12-03[NET]: Conditionally use bh_lock_sock_nested in sk_receive_skbArnaldo Carvalho de Melo1-1/+1
Spotted by Ian McDonald, tentatively fixed by Gerrit Renker: http://www.mail-archive.com/dccp%40vger.kernel.org/msg00599.html Rewritten not to unroll sk_receive_skb, in the common case, i.e. no lock debugging, its optimized away. Signed-off-by: Arnaldo Carvalho de Melo <acme@mandriva.com>
2006-12-03[NET] driver/s390/net: Checksum annotations.Al Viro4-24/+24
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-12-03[NET]: Kill direct includes of asm/checksum.hAl Viro4-4/+0
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-12-03[RANDOM]: Annotate random.h IP helpers.Al Viro1-24/+24
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-12-03netpoll queue cleanupStephen Hemminger1-1/+0
The beast had a long and not very happy history. At one point, a friend (netdump) had asked that he open up a little. Well, the friend was long gone now, and the beast had this dangling piece hanging (netpoll_queue). It wasn't hard to stitch the netpoll_queue back in where it belonged and make everything tidy. Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
2006-12-03netpoll setup error handlingStephen Hemminger1-2/+5
The beast was not always healthy. When it was sick, it tended to be laconic and not tell anyone the real problem. A few small changes had it telling the world about its problems, if they really wanted to hear. Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
2006-12-03[ATM] ambassador,firestream: "-1 >>" is implementation definedAlexey Dobriyan2-2/+2
6.5.7(5): The result of E1 >> E2 is E1 right-shifted E2 bit positions. ... If E1 has a signed type and a negative value, the resulting value is implementation defined. So, cast -1 to unsigned type to make result well-defined. [ Modified to use ~0U based upon recommendation from Al Viro. -DaveM ] Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-12-03[NET]: The scheduled removal of the frame diverter.Adrian Bunk1-1/+0
This patch contains the scheduled removal of the frame diverter. Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-12-03Merge branch 'upstream-linus' of ↵Linus Torvalds124-2924/+24088
master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6 * 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6: (118 commits) [netdrvr] skge: build fix [PATCH] NetXen: driver cleanup, removed unnecessary __iomem type casts [PATCH] PHY: Add support for configuring the PHY connection interface [PATCH] chelesio: transmit locking (plus bug fix). [PATCH] chelsio: statistics improvement [PATCH] chelsio: add MSI support [PATCH] chelsio: use standard CRC routines [PATCH] chelsio: cleanup pm3393 code [PATCH] chelsio: add 1G swcixw aupport [PATCH] chelsio: add support for other 10G boards [PATCH] chelsio: remove unused mutex [PATCH] chelsio: use kzalloc [PATCH] chelsio: whitespace fixes [PATCH] amd8111e use standard CRC lib [PATCH] sky2: msi enhancements. [PATCH] sky2: kfree_skb_any needed [PATCH] sky2: fixes for Yukon EC_U chip revisions [PATCH] sky2: add Dlink 560SX id [PATCH] sky2: receive error handling fix [PATCH] skge: don't clear MC state on link down ...
2006-12-02Merge branch 'for-linus' of ↵Linus Torvalds15-226/+509
master.kernel.org:/pub/scm/linux/kernel/git/drzeus/mmc * 'for-linus' of master.kernel.org:/pub/scm/linux/kernel/git/drzeus/mmc: mmc: correct request error handling mmc: Flush block queue when removing card mmc: sdhci high speed support mmc: Support for high speed SD cards mmc: Fix mmc_delay() function mmc: Add support for mmc v4 wide-bus modes [PATCH] mmc: Add support for mmc v4 high speed mode trivial change for mmc/Kconfig: MMC_PXA does not mean only PXA255 Make general code cleanups Add MMC_CAP_{MULTIWRITE,BYTEBLOCK} flags Platform device error handling cleanup Move register definitions away from the header file Change OMAP_MMC_{READ,WRITE} macros to use the host pointer Replace base with virt_base and phys_base mmc: constify mmc_host_ops vectors mmc: remove kernel_thread()
2006-12-02[netdrvr] skge: build fixJeff Garzik1-0/+1
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-12-02[PATCH] NetXen: driver cleanup, removed unnecessary __iomem type castsAmit S. Kale4-45/+18
Signed-off-by: Amit S. Kale <amitkale@netxen.com> netxen_nic.h | 38 ++++++++------------------------------ netxen_nic_ethtool.c | 5 ++--- netxen_nic_hw.c | 12 +++++------- netxen_nic_main.c | 8 +++----- 4 files changed, 18 insertions(+), 45 deletions(-) Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-12-02[PATCH] PHY: Add support for configuring the PHY connection interfaceAndy Fleming5-13/+64
Most PHYs connect to an ethernet controller over a GMII or MII interface. However, a growing number are connected over different interfaces, such as RGMII or SGMII. The ethernet driver will tell the PHY what type of connection it is by setting it manually, or passing it in through phy_connect (or phy_attach). Changes include: * Updates to documentation * Updates to PHY Lib consumers * Changes to PHY Lib to add interface support * Some minor changes to whitespace in phy.h * gianfar driver now detects interface and passes appropriate value to PHY Lib Signed-off-by: Andrew Fleming <afleming@freescale.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-12-02[PATCH] chelesio: transmit locking (plus bug fix).Stephen Hemminger1-4/+15
If transmit lock is contended on, then push return code back and retry at higher level. Bugfix: If buffer is reallocated because of lack of headroom and the send is blocked, then drop packet. This is necessary because caller would end up requeuing a freed skb. Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-12-02[PATCH] chelsio: statistics improvementStephen Hemminger3-68/+100
Cleanup statistics management: * Get rid of duplicate or unused statistics * Convert high volume stats to per-cpu and 64 bit Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-12-02[PATCH] chelsio: add MSI supportStephen Hemminger2-3/+18
Using MSI can avoid sharing IRQ and associated overhead. Tested on PCI-X. Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-12-02[PATCH] chelsio: use standard CRC routinesStephen Hemminger2-28/+4
Replace driver crc calculation with existing library. Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-12-02[PATCH] chelsio: cleanup pm3393 codeStephen Hemminger1-40/+29
Replace macro with function for updating RMON values Cleanups: * remove unused enum's * Fix comment format Signed-off-by: Stephen HEmminger <shemminger@osdl.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-12-02[PATCH] chelsio: add 1G swcixw aupportStephen Hemminger12-0/+2780
Add support for 1G versions of Chelsio devices. Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-12-02[PATCH] chelsio: add support for other 10G boardsStephen Hemminger23-371/+6041
Add support for other versions of the 10G Chelsio boards. This is basically a port of the vendor driver with the TOE features removed. Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-12-02[PATCH] chelsio: remove unused mutexStephen Hemminger2-2/+0
This mutex is unused in current (non TOE) code. Signed-off-by: Stephen Hemminger<shemminger@osdl.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-12-02[PATCH] chelsio: use kzallocStephen Hemminger2-4/+3
Use kzalloc in several places. Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-12-02[PATCH] chelsio: whitespace fixesStephen Hemminger4-16/+16
Fix indentation and blank/tab issues. Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-12-02[PATCH] amd8111e use standard CRC libStephen Hemminger2-30/+1
I noticed this driver (and several others) reinvent their own copy of the existing CRC library. Don't have the hardware, but tested by extracting code and comparing result. Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-12-02[PATCH] sky2: msi enhancements.Stephen Hemminger2-8/+11
If using Message Signaled Interrupts (MSI) then the IRQ will never be shared. Don't call pci_disable_msi() unless using MSI. Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-12-02[PATCH] sky2: kfree_skb_any neededStephen Hemminger1-1/+1
It is possible for the sky2 driver NAPI poll routine to be called with IRQ's disabled if netpoll is trying to make space in the tx queue. This is an obscure path, but if it happens, the kfree_skb needs to happen via softirq. Calling kfree_skb with IRQ's disabled is a not allowed. Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-12-02[PATCH] sky2: fixes for Yukon EC_U chip revisionsStephen Hemminger2-9/+13
Update workarounds for 88E803X based on the latest SysKonnect vendor driver version (8.41). Tested on EC_U rev A1, only. These up the receive performance. Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-12-02[PATCH] sky2: add Dlink 560SX idStephen Hemminger1-0/+1
Add new PCI ID for DLink 560SX. This from the latest SysKonnect vendor driver (version 8.41). Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-12-02[PATCH] sky2: receive error handling fixStephen Hemminger1-3/+3
If sky2 detects out of memory, or gets a bad frame, it reuses the same receive buffer, but forgets to poke the hardware. This could lead to the receiver getting stuck if there were lots of errors. Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-12-02[PATCH] skge: don't clear MC state on link downStephen Hemminger1-3/+2
I would rather fix Andy's problem by not clearing multicast information on link down. Also, add code to restore multicast state after ethtool phy reset. Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-12-02drivers/net/tulip/dmfe: support basic carrier detectionSamuel Thibault1-1/+8
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-12-02[PATCH] netxen: uses PCIRandy Dunlap1-0/+1
drivers/built-in.o: In function `netxen_nic_remove': netxen_nic_main.c:(.text+0x31b4d): undefined reference to `pci_disable_msi' netxen_nic_main.c:(.text+0x31b8e): undefined reference to `pci_release_regions' drivers/built-in.o: In function `netxen_init_module': netxen_nic_main.c:(.init.text+0x3f17): undefined reference to `pci_module_init' make: *** [.tmp_vmlinux1] Error 1 Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>