summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)AuthorFilesLines
2023-07-27Merge tag 'net-6.5-rc4' of ↵Linus Torvalds31-138/+405
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from Paolo Abeni: "Including fixes from can, netfilter. Current release - regressions: - core: fix splice_to_socket() for O_NONBLOCK socket - af_unix: fix fortify_panic() in unix_bind_bsd(). - can: raw: fix lockdep issue in raw_release() Previous releases - regressions: - tcp: reduce chance of collisions in inet6_hashfn(). - netfilter: skip immediate deactivate in _PREPARE_ERROR - tipc: stop tipc crypto on failure in tipc_node_create - eth: igc: fix kernel panic during ndo_tx_timeout callback - eth: iavf: fix potential deadlock on allocation failure Previous releases - always broken: - ipv6: fix bug where deleting a mngtmpaddr can create a new temporary address - eth: ice: fix memory management in ice_ethtool_fdir.c - eth: hns3: fix the imp capability bit cannot exceed 32 bits issue - eth: vxlan: calculate correct header length for GPE - eth: stmmac: apply redundant write work around on 4.xx too" * tag 'net-6.5-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (49 commits) tipc: stop tipc crypto on failure in tipc_node_create af_unix: Terminate sun_path when bind()ing pathname socket. tipc: check return value of pskb_trim() benet: fix return value check in be_lancer_xmit_workarounds() virtio-net: fix race between set queues and probe net/sched: mqprio: Add length check for TCA_MQPRIO_{MAX/MIN}_RATE64 splice, net: Fix splice_to_socket() for O_NONBLOCK socket net: fec: tx processing does not call XDP APIs if budget is 0 mptcp: more accurate NL event generation selftests: mptcp: join: only check for ip6tables if needed tools: ynl-gen: fix parse multi-attr enum attribute tools: ynl-gen: fix enum index in _decode_enum(..) netfilter: nf_tables: disallow rule addition to bound chain via NFTA_RULE_CHAIN_ID netfilter: nf_tables: skip immediate deactivate in _PREPARE_ERROR netfilter: nft_set_rbtree: fix overlap expiration walk igc: Fix Kernel Panic during ndo_tx_timeout callback net: dsa: qca8k: fix mdb add/del case with 0 VID net: dsa: qca8k: fix broken search_and_del net: dsa: qca8k: fix search_and_insert wrong handling of new rule net: dsa: qca8k: enable use_single_write for qca8xxx ...
2023-07-27Merge tag 'soundwire-6.5-fixes' of ↵Linus Torvalds3-7/+7
git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire Pull soundwire fixes from Vinod Koul: - Core fix for enumeration completion - Qualcomm driver fix to update status - AMD driver fix for probe error check * tag 'soundwire-6.5-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire: soundwire: amd: Fix a check for errors in probe() soundwire: qcom: update status correctly with mask soundwire: fix enumeration completion
2023-07-27Merge tag 'phy-fixes-6.5' of ↵Linus Torvalds4-31/+53
git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy Pull phy fixes from Vinod Koul: - Out of bound fix for hisilicon phy - Qualcomm synopsis femto phy for keeping clock enabled during suspend and enabling ref clocks - Mediatek driver fixes for upper limit test and error code * tag 'phy-fixes-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy: phy: hisilicon: Fix an out of bounds check in hisi_inno_phy_probe() phy: qcom-snps-femto-v2: use qcom_snps_hsphy_suspend/resume error code phy: qcom-snps-femto-v2: properly enable ref clock phy: qcom-snps-femto-v2: keep cfg_ahb_clk enabled during runtime suspend phy: mediatek: hdmi: mt8195: fix prediv bad upper limit test phy: phy-mtk-dp: Fix an error code in probe()
2023-07-27benet: fix return value check in be_lancer_xmit_workarounds()Yuanjun Gong1-1/+2
in be_lancer_xmit_workarounds(), it should go to label 'tx_drop' if an unexpected value is returned by pskb_trim(). Fixes: 93040ae5cc8d ("be2net: Fix to trim skb for padded vlan packets to workaround an ASIC Bug") Signed-off-by: Yuanjun Gong <ruc_gongyuanjun@163.com> Link: https://lore.kernel.org/r/20230725032726.15002-1-ruc_gongyuanjun@163.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-07-27virtio-net: fix race between set queues and probeJason Wang1-2/+2
A race were found where set_channels could be called after registering but before virtnet_set_queues() in virtnet_probe(). Fixing this by moving the virtnet_set_queues() before netdevice registering. While at it, use _virtnet_set_queues() to avoid holding rtnl as the device is not even registered at that time. Cc: stable@vger.kernel.org Fixes: a220871be66f ("virtio-net: correctly enable multiqueue") Signed-off-by: Jason Wang <jasowang@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com> Link: https://lore.kernel.org/r/20230725072049.617289-1-jasowang@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-07-27net: fec: tx processing does not call XDP APIs if budget is 0Wei Fang1-4/+12
According to the clarification [1] in the latest napi.rst, the tx processing cannot call any XDP (or page pool) APIs if the "budget" is 0. Because NAPI is called with the budget of 0 (such as netpoll) indicates we may be in an IRQ context, however, we cannot use the page pool from IRQ context. [1] https://lore.kernel.org/all/20230720161323.2025379-1-kuba@kernel.org/ Fixes: 20f797399035 ("net: fec: recycle pages for transmitted XDP frames") Signed-off-by: Wei Fang <wei.fang@nxp.com> Suggested-by: Jakub Kicinski <kuba@kernel.org> Link: https://lore.kernel.org/r/20230725074148.2936402-1-wei.fang@nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-07-26Merge tag 'platform-drivers-x86-v6.5-3' of ↵Linus Torvalds12-40/+173
git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86 Pull x86 platform driver fixes from Hans de Goede: "Misc small fixes and hw-id additions" * tag 'platform-drivers-x86-v6.5-3' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: platform/x86: huawei-wmi: Silence ambient light sensor platform/x86: msi-laptop: Fix rfkill out-of-sync on MSI Wind U100 platform/x86: asus-wmi: Fix setting RGB mode on some TUF laptops platform/x86: think-lmi: Use kfree_sensitive instead of kfree platform/x86/intel/hid: Add HP Dragonfly G2 to VGBS DMI quirks platform/x86: intel: hid: Always call BTNL ACPI method platform/x86/amd/pmf: Notify OS power slider update platform/x86/amd/pmf: reduce verbosity of apmf_get_system_params platform/x86: serial-multi-instantiate: Auto detect IRQ resource for CSC3551 platform/x86/amd: pmc: Use release_mem_region() to undo request_mem_region_muxed() platform/x86: touchscreen_dmi.c: small changes for Archos 101 Cesium Educ tablet
2023-07-26igc: Fix Kernel Panic during ndo_tx_timeout callbackMuhammad Husaini Zulkifli1-12/+28
The Xeon validation group has been carrying out some loaded tests with various HW configurations, and they have seen some transmit queue time out happening during the test. This will cause the reset adapter function to be called by igc_tx_timeout(). Similar race conditions may arise when the interface is being brought down and up in igc_reinit_locked(), an interrupt being generated, and igc_clean_tx_irq() being called to complete the TX. When the igc_tx_timeout() function is invoked, this patch will turn off all TX ring HW queues during igc_down() process. TX ring HW queues will be activated again during the igc_configure_tx_ring() process when performing the igc_up() procedure later. This patch also moved existing igc_disable_tx_ring_hw() to avoid using forward declaration. Kernel trace: [ 7678.747813] ------------[ cut here ]------------ [ 7678.757914] NETDEV WATCHDOG: enp1s0 (igc): transmit queue 2 timed out [ 7678.770117] WARNING: CPU: 0 PID: 13 at net/sched/sch_generic.c:525 dev_watchdog+0x1ae/0x1f0 [ 7678.784459] Modules linked in: xt_conntrack nft_chain_nat xt_MASQUERADE xt_addrtype nft_compat nf_tables nfnetlink br_netfilter bridge stp llc overlay dm_mod emrcha(PO) emriio(PO) rktpm(PO) cegbuf_mod(PO) patch_update(PO) se(PO) sgx_tgts(PO) mktme(PO) keylocker(PO) svtdx(PO) svfs_pci_hotplug(PO) vtd_mod(PO) davemem(PO) svmabort(PO) svindexio(PO) usbx2(PO) ehci_sched(PO) svheartbeat(PO) ioapic(PO) sv8259(PO) svintr(PO) lt(PO) pcierootport(PO) enginefw_mod(PO) ata(PO) smbus(PO) spiflash_cdf(PO) arden(PO) dsa_iax(PO) oobmsm_punit(PO) cpm(PO) svkdb(PO) ebg_pch(PO) pch(PO) sviotargets(PO) svbdf(PO) svmem(PO) svbios(PO) dram(PO) svtsc(PO) targets(PO) superio(PO) svkernel(PO) cswitch(PO) mcf(PO) pentiumIII_mod(PO) fs_svfs(PO) mdevdefdb(PO) svfs_os_services(O) ixgbe mdio mdio_devres libphy emeraldrapids_svdefs(PO) regsupport(O) libnvdimm nls_cp437 snd_hda_codec_realtek snd_hda_codec_generic ledtrig_audio snd_hda_intel snd_intel_dspcfg snd_hda_codec snd_hwdep x86_pkg_temp_thermal snd_hda_core snd_pcm snd_timer isst_if_mbox_pci [ 7678.784496] input_leds isst_if_mmio sg snd isst_if_common soundcore wmi button sad9(O) drm fuse backlight configfs efivarfs ip_tables x_tables vmd sdhci led_class rtl8150 r8152 hid_generic pegasus mmc_block usbhid mmc_core hid megaraid_sas ixgb igb i2c_algo_bit ice i40e hpsa scsi_transport_sas e1000e e1000 e100 ax88179_178a usbnet xhci_pci sd_mod xhci_hcd t10_pi crc32c_intel crc64_rocksoft igc crc64 crc_t10dif usbcore crct10dif_generic ptp crct10dif_common usb_common pps_core [ 7679.200403] RIP: 0010:dev_watchdog+0x1ae/0x1f0 [ 7679.210201] Code: 28 e9 53 ff ff ff 4c 89 e7 c6 05 06 42 b9 00 01 e8 17 d1 fb ff 44 89 e9 4c 89 e6 48 c7 c7 40 ad fb 81 48 89 c2 e8 52 62 82 ff <0f> 0b e9 72 ff ff ff 65 8b 05 80 7d 7c 7e 89 c0 48 0f a3 05 0a c1 [ 7679.245438] RSP: 0018:ffa00000001f7d90 EFLAGS: 00010282 [ 7679.256021] RAX: 0000000000000000 RBX: ff11000109938440 RCX: 0000000000000000 [ 7679.268710] RDX: ff11000361e26cd8 RSI: ff11000361e1b880 RDI: ff11000361e1b880 [ 7679.281314] RBP: ffa00000001f7da8 R08: ff1100035f8fffe8 R09: 0000000000027ffb [ 7679.293840] R10: 0000000000001f0a R11: ff1100035f840000 R12: ff11000109938000 [ 7679.306276] R13: 0000000000000002 R14: dead000000000122 R15: ffa00000001f7e18 [ 7679.318648] FS: 0000000000000000(0000) GS:ff11000361e00000(0000) knlGS:0000000000000000 [ 7679.332064] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 7679.342757] CR2: 00007ffff7fca168 CR3: 000000013b08a006 CR4: 0000000000471ef8 [ 7679.354984] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 7679.367207] DR3: 0000000000000000 DR6: 00000000fffe07f0 DR7: 0000000000000400 [ 7679.379370] PKRU: 55555554 [ 7679.386446] Call Trace: [ 7679.393152] <TASK> [ 7679.399363] ? __pfx_dev_watchdog+0x10/0x10 [ 7679.407870] call_timer_fn+0x31/0x110 [ 7679.415698] expire_timers+0xb2/0x120 [ 7679.423403] run_timer_softirq+0x179/0x1e0 [ 7679.431532] ? __schedule+0x2b1/0x820 [ 7679.439078] __do_softirq+0xd1/0x295 [ 7679.446426] ? __pfx_smpboot_thread_fn+0x10/0x10 [ 7679.454867] run_ksoftirqd+0x22/0x30 [ 7679.462058] smpboot_thread_fn+0xb7/0x160 [ 7679.469670] kthread+0xcd/0xf0 [ 7679.476097] ? __pfx_kthread+0x10/0x10 [ 7679.483211] ret_from_fork+0x29/0x50 [ 7679.490047] </TASK> [ 7679.495204] ---[ end trace 0000000000000000 ]--- [ 7679.503179] igc 0000:01:00.0 enp1s0: Register Dump [ 7679.511230] igc 0000:01:00.0 enp1s0: Register Name Value [ 7679.519892] igc 0000:01:00.0 enp1s0: CTRL 181c0641 [ 7679.528782] igc 0000:01:00.0 enp1s0: STATUS 40280683 [ 7679.537551] igc 0000:01:00.0 enp1s0: CTRL_EXT 10000040 [ 7679.546284] igc 0000:01:00.0 enp1s0: MDIC 180a3800 [ 7679.554942] igc 0000:01:00.0 enp1s0: ICR 00000081 [ 7679.563503] igc 0000:01:00.0 enp1s0: RCTL 04408022 [ 7679.571963] igc 0000:01:00.0 enp1s0: RDLEN[0-3] 00001000 00001000 00001000 00001000 [ 7679.583075] igc 0000:01:00.0 enp1s0: RDH[0-3] 00000068 000000b6 0000000f 00000031 [ 7679.594162] igc 0000:01:00.0 enp1s0: RDT[0-3] 00000066 000000b2 0000000e 00000030 [ 7679.605174] igc 0000:01:00.0 enp1s0: RXDCTL[0-3] 02040808 02040808 02040808 02040808 [ 7679.616196] igc 0000:01:00.0 enp1s0: RDBAL[0-3] 1bb7c000 1bb7f000 1bb82000 0ef33000 [ 7679.627242] igc 0000:01:00.0 enp1s0: RDBAH[0-3] 00000001 00000001 00000001 00000001 [ 7679.638256] igc 0000:01:00.0 enp1s0: TCTL a503f0fa [ 7679.646607] igc 0000:01:00.0 enp1s0: TDBAL[0-3] 2ba4a000 1bb6f000 1bb74000 1bb79000 [ 7679.657609] igc 0000:01:00.0 enp1s0: TDBAH[0-3] 00000001 00000001 00000001 00000001 [ 7679.668551] igc 0000:01:00.0 enp1s0: TDLEN[0-3] 00001000 00001000 00001000 00001000 [ 7679.679470] igc 0000:01:00.0 enp1s0: TDH[0-3] 000000a7 0000002d 000000bf 000000d9 [ 7679.690406] igc 0000:01:00.0 enp1s0: TDT[0-3] 000000a7 0000002d 000000bf 000000d9 [ 7679.701264] igc 0000:01:00.0 enp1s0: TXDCTL[0-3] 02100108 02100108 02100108 02100108 [ 7679.712123] igc 0000:01:00.0 enp1s0: Reset adapter [ 7683.085967] igc 0000:01:00.0 enp1s0: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX [ 8086.945561] ------------[ cut here ]------------ Entering kdb (current=0xffffffff8220b200, pid 0) on processor 0 Oops: (null) due to oops @ 0xffffffff81573888 RIP: 0010:dql_completed+0x148/0x160 Code: c9 00 48 89 57 58 e9 46 ff ff ff 45 85 e4 41 0f 95 c4 41 39 db 0f 95 c1 41 84 cc 74 05 45 85 ed 78 0a 44 89 c1 e9 27 ff ff ff <0f> 0b 01 f6 44 89 c1 29 f1 0f 48 ca eb 8c cc cc cc cc cc cc cc cc RSP: 0018:ffa0000000003e00 EFLAGS: 00010287 RAX: 000000000000006c RBX: ffa0000003eb0f78 RCX: ff11000109938000 RDX: 0000000000000003 RSI: 0000000000000160 RDI: ff110001002e9480 RBP: ffa0000000003ed8 R08: ff110001002e93c0 R09: ffa0000000003d28 R10: 0000000000007cc0 R11: 0000000000007c54 R12: 00000000ffffffd9 R13: ff1100037039cb00 R14: 00000000ffffffd9 R15: ff1100037039c048 FS: 0000000000000000(0000) GS:ff11000361e00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007ffff7fca168 CR3: 000000013b08a003 CR4: 0000000000471ef8 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe07f0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: <IRQ> ? igc_poll+0x1a9/0x14d0 [igc] __napi_poll+0x2e/0x1b0 net_rx_action+0x126/0x250 __do_softirq+0xd1/0x295 irq_exit_rcu+0xc5/0xf0 common_interrupt+0x86/0xa0 </IRQ> <TASK> asm_common_interrupt+0x27/0x40 RIP: 0010:cpuidle_enter_state+0xd3/0x3e0 Code: 73 f1 ff ff 49 89 c6 8b 05 e2 ca a7 00 85 c0 0f 8f b3 02 00 00 31 ff e8 1b de 75 ff 80 7d d7 00 0f 85 cd 01 00 00 fb 45 85 ff <0f> 88 fd 00 00 00 49 63 cf 4c 2b 75 c8 48 8d 04 49 48 89 ca 48 8d RSP: 0018:ffffffff82203df0 EFLAGS: 00000202 RAX: ff11000361e2a200 RBX: 0000000000000002 RCX: 000000000000001f RDX: 0000000000000000 RSI: 000000003cf3cf3d RDI: 0000000000000000 RBP: ffffffff82203e28 R08: 0000075ae38471c8 R09: 0000000000000018 R10: 000000000000031a R11: ffffffff8238dca0 R12: ffd1ffffff200000 R13: ffffffff8238dca0 R14: 0000075ae38471c8 R15: 0000000000000002 cpuidle_enter+0x2e/0x50 call_cpuidle+0x23/0x40 do_idle+0x1be/0x220 cpu_startup_entry+0x20/0x30 rest_init+0xb5/0xc0 arch_call_rest_init+0xe/0x30 start_kernel+0x448/0x760 x86_64_start_kernel+0x109/0x150 secondary_startup_64_no_verify+0xe0/0xeb </TASK> more> [0]kdb> [0]kdb> [0]kdb> go Catastrophic error detected kdb_continue_catastrophic=0, type go a second time if you really want to continue [0]kdb> go Catastrophic error detected kdb_continue_catastrophic=0, attempting to continue [ 8086.955689] refcount_t: underflow; use-after-free. [ 8086.955697] WARNING: CPU: 0 PID: 0 at lib/refcount.c:28 refcount_warn_saturate+0xc2/0x110 [ 8086.955706] Modules linked in: xt_conntrack nft_chain_nat xt_MASQUERADE xt_addrtype nft_compat nf_tables nfnetlink br_netfilter bridge stp llc overlay dm_mod emrcha(PO) emriio(PO) rktpm(PO) cegbuf_mod(PO) patch_update(PO) se(PO) sgx_tgts(PO) mktme(PO) keylocker(PO) svtdx(PO) svfs_pci_hotplug(PO) vtd_mod(PO) davemem(PO) svmabort(PO) svindexio(PO) usbx2(PO) ehci_sched(PO) svheartbeat(PO) ioapic(PO) sv8259(PO) svintr(PO) lt(PO) pcierootport(PO) enginefw_mod(PO) ata(PO) smbus(PO) spiflash_cdf(PO) arden(PO) dsa_iax(PO) oobmsm_punit(PO) cpm(PO) svkdb(PO) ebg_pch(PO) pch(PO) sviotargets(PO) svbdf(PO) svmem(PO) svbios(PO) dram(PO) svtsc(PO) targets(PO) superio(PO) svkernel(PO) cswitch(PO) mcf(PO) pentiumIII_mod(PO) fs_svfs(PO) mdevdefdb(PO) svfs_os_services(O) ixgbe mdio mdio_devres libphy emeraldrapids_svdefs(PO) regsupport(O) libnvdimm nls_cp437 snd_hda_codec_realtek snd_hda_codec_generic ledtrig_audio snd_hda_intel snd_intel_dspcfg snd_hda_codec snd_hwdep x86_pkg_temp_thermal snd_hda_core snd_pcm snd_timer isst_if_mbox_pci [ 8086.955751] input_leds isst_if_mmio sg snd isst_if_common soundcore wmi button sad9(O) drm fuse backlight configfs efivarfs ip_tables x_tables vmd sdhci led_class rtl8150 r8152 hid_generic pegasus mmc_block usbhid mmc_core hid megaraid_sas ixgb igb i2c_algo_bit ice i40e hpsa scsi_transport_sas e1000e e1000 e100 ax88179_178a usbnet xhci_pci sd_mod xhci_hcd t10_pi crc32c_intel crc64_rocksoft igc crc64 crc_t10dif usbcore crct10dif_generic ptp crct10dif_common usb_common pps_core [ 8086.955784] RIP: 0010:refcount_warn_saturate+0xc2/0x110 [ 8086.955788] Code: 01 e8 82 e7 b4 ff 0f 0b 5d c3 cc cc cc cc 80 3d 68 c6 eb 00 00 75 81 48 c7 c7 a0 87 f6 81 c6 05 58 c6 eb 00 01 e8 5e e7 b4 ff <0f> 0b 5d c3 cc cc cc cc 80 3d 42 c6 eb 00 00 0f 85 59 ff ff ff 48 [ 8086.955790] RSP: 0018:ffa0000000003da0 EFLAGS: 00010286 [ 8086.955793] RAX: 0000000000000000 RBX: ff1100011da40ee0 RCX: ff11000361e1b888 [ 8086.955794] RDX: 00000000ffffffd8 RSI: 0000000000000027 RDI: ff11000361e1b880 [ 8086.955795] RBP: ffa0000000003da0 R08: 80000000ffff9f45 R09: ffa0000000003d28 [ 8086.955796] R10: ff1100035f840000 R11: 0000000000000028 R12: ff11000319ff8000 [ 8086.955797] R13: ff1100011bb79d60 R14: 00000000ffffffd6 R15: ff1100037039cb00 [ 8086.955798] FS: 0000000000000000(0000) GS:ff11000361e00000(0000) knlGS:0000000000000000 [ 8086.955800] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 8086.955801] CR2: 00007ffff7fca168 CR3: 000000013b08a003 CR4: 0000000000471ef8 [ 8086.955803] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 8086.955803] DR3: 0000000000000000 DR6: 00000000fffe07f0 DR7: 0000000000000400 [ 8086.955804] PKRU: 55555554 [ 8086.955805] Call Trace: [ 8086.955806] <IRQ> [ 8086.955808] tcp_wfree+0x112/0x130 [ 8086.955814] skb_release_head_state+0x24/0xa0 [ 8086.955818] napi_consume_skb+0x9c/0x160 [ 8086.955821] igc_poll+0x5d8/0x14d0 [igc] [ 8086.955835] __napi_poll+0x2e/0x1b0 [ 8086.955839] net_rx_action+0x126/0x250 [ 8086.955843] __do_softirq+0xd1/0x295 [ 8086.955846] irq_exit_rcu+0xc5/0xf0 [ 8086.955851] common_interrupt+0x86/0xa0 [ 8086.955857] </IRQ> [ 8086.955857] <TASK> [ 8086.955858] asm_common_interrupt+0x27/0x40 [ 8086.955862] RIP: 0010:cpuidle_enter_state+0xd3/0x3e0 [ 8086.955866] Code: 73 f1 ff ff 49 89 c6 8b 05 e2 ca a7 00 85 c0 0f 8f b3 02 00 00 31 ff e8 1b de 75 ff 80 7d d7 00 0f 85 cd 01 00 00 fb 45 85 ff <0f> 88 fd 00 00 00 49 63 cf 4c 2b 75 c8 48 8d 04 49 48 89 ca 48 8d [ 8086.955867] RSP: 0018:ffffffff82203df0 EFLAGS: 00000202 [ 8086.955869] RAX: ff11000361e2a200 RBX: 0000000000000002 RCX: 000000000000001f [ 8086.955870] RDX: 0000000000000000 RSI: 000000003cf3cf3d RDI: 0000000000000000 [ 8086.955871] RBP: ffffffff82203e28 R08: 0000075ae38471c8 R09: 0000000000000018 [ 8086.955872] R10: 000000000000031a R11: ffffffff8238dca0 R12: ffd1ffffff200000 [ 8086.955873] R13: ffffffff8238dca0 R14: 0000075ae38471c8 R15: 0000000000000002 [ 8086.955875] cpuidle_enter+0x2e/0x50 [ 8086.955880] call_cpuidle+0x23/0x40 [ 8086.955884] do_idle+0x1be/0x220 [ 8086.955887] cpu_startup_entry+0x20/0x30 [ 8086.955889] rest_init+0xb5/0xc0 [ 8086.955892] arch_call_rest_init+0xe/0x30 [ 8086.955895] start_kernel+0x448/0x760 [ 8086.955898] x86_64_start_kernel+0x109/0x150 [ 8086.955900] secondary_startup_64_no_verify+0xe0/0xeb [ 8086.955904] </TASK> [ 8086.955904] ---[ end trace 0000000000000000 ]--- [ 8086.955912] ------------[ cut here ]------------ [ 8086.955913] kernel BUG at lib/dynamic_queue_limits.c:27! [ 8086.955918] invalid opcode: 0000 [#1] SMP [ 8086.955922] RIP: 0010:dql_completed+0x148/0x160 [ 8086.955925] Code: c9 00 48 89 57 58 e9 46 ff ff ff 45 85 e4 41 0f 95 c4 41 39 db 0f 95 c1 41 84 cc 74 05 45 85 ed 78 0a 44 89 c1 e9 27 ff ff ff <0f> 0b 01 f6 44 89 c1 29 f1 0f 48 ca eb 8c cc cc cc cc cc cc cc cc [ 8086.955927] RSP: 0018:ffa0000000003e00 EFLAGS: 00010287 [ 8086.955928] RAX: 000000000000006c RBX: ffa0000003eb0f78 RCX: ff11000109938000 [ 8086.955929] RDX: 0000000000000003 RSI: 0000000000000160 RDI: ff110001002e9480 [ 8086.955930] RBP: ffa0000000003ed8 R08: ff110001002e93c0 R09: ffa0000000003d28 [ 8086.955931] R10: 0000000000007cc0 R11: 0000000000007c54 R12: 00000000ffffffd9 [ 8086.955932] R13: ff1100037039cb00 R14: 00000000ffffffd9 R15: ff1100037039c048 [ 8086.955933] FS: 0000000000000000(0000) GS:ff11000361e00000(0000) knlGS:0000000000000000 [ 8086.955934] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 8086.955935] CR2: 00007ffff7fca168 CR3: 000000013b08a003 CR4: 0000000000471ef8 [ 8086.955936] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 8086.955937] DR3: 0000000000000000 DR6: 00000000fffe07f0 DR7: 0000000000000400 [ 8086.955938] PKRU: 55555554 [ 8086.955939] Call Trace: [ 8086.955939] <IRQ> [ 8086.955940] ? igc_poll+0x1a9/0x14d0 [igc] [ 8086.955949] __napi_poll+0x2e/0x1b0 [ 8086.955952] net_rx_action+0x126/0x250 [ 8086.955956] __do_softirq+0xd1/0x295 [ 8086.955958] irq_exit_rcu+0xc5/0xf0 [ 8086.955961] common_interrupt+0x86/0xa0 [ 8086.955964] </IRQ> [ 8086.955965] <TASK> [ 8086.955965] asm_common_interrupt+0x27/0x40 [ 8086.955968] RIP: 0010:cpuidle_enter_state+0xd3/0x3e0 [ 8086.955971] Code: 73 f1 ff ff 49 89 c6 8b 05 e2 ca a7 00 85 c0 0f 8f b3 02 00 00 31 ff e8 1b de 75 ff 80 7d d7 00 0f 85 cd 01 00 00 fb 45 85 ff <0f> 88 fd 00 00 00 49 63 cf 4c 2b 75 c8 48 8d 04 49 48 89 ca 48 8d [ 8086.955972] RSP: 0018:ffffffff82203df0 EFLAGS: 00000202 [ 8086.955973] RAX: ff11000361e2a200 RBX: 0000000000000002 RCX: 000000000000001f [ 8086.955974] RDX: 0000000000000000 RSI: 000000003cf3cf3d RDI: 0000000000000000 [ 8086.955974] RBP: ffffffff82203e28 R08: 0000075ae38471c8 R09: 0000000000000018 [ 8086.955975] R10: 000000000000031a R11: ffffffff8238dca0 R12: ffd1ffffff200000 [ 8086.955976] R13: ffffffff8238dca0 R14: 0000075ae38471c8 R15: 0000000000000002 [ 8086.955978] cpuidle_enter+0x2e/0x50 [ 8086.955981] call_cpuidle+0x23/0x40 [ 8086.955984] do_idle+0x1be/0x220 [ 8086.955985] cpu_startup_entry+0x20/0x30 [ 8086.955987] rest_init+0xb5/0xc0 [ 8086.955990] arch_call_rest_init+0xe/0x30 [ 8086.955992] start_kernel+0x448/0x760 [ 8086.955994] x86_64_start_kernel+0x109/0x150 [ 8086.955996] secondary_startup_64_no_verify+0xe0/0xeb [ 8086.955998] </TASK> [ 8086.955999] Modules linked in: xt_conntrack nft_chain_nat xt_MASQUERADE xt_addrtype nft_compat nf_tables nfnetlink br_netfilter bridge stp llc overlay dm_mod emrcha(PO) emriio(PO) rktpm(PO) cegbuf_mod(PO) patch_update(PO) se(PO) sgx_tgts(PO) mktme(PO) keylocker(PO) svtdx(PO) svfs_pci_hotplug(PO) vtd_mod(PO) davemem(PO) svmabort(PO) svindexio(PO) usbx2(PO) ehci_sched(PO) svheartbeat(PO) ioapic(PO) sv8259(PO) svintr(PO) lt(PO) pcierootport(PO) enginefw_mod(PO) ata(PO) smbus(PO) spiflash_cdf(PO) arden(PO) dsa_iax(PO) oobmsm_punit(PO) cpm(PO) svkdb(PO) ebg_pch(PO) pch(PO) sviotargets(PO) svbdf(PO) svmem(PO) svbios(PO) dram(PO) svtsc(PO) targets(PO) superio(PO) svkernel(PO) cswitch(PO) mcf(PO) pentiumIII_mod(PO) fs_svfs(PO) mdevdefdb(PO) svfs_os_services(O) ixgbe mdio mdio_devres libphy emeraldrapids_svdefs(PO) regsupport(O) libnvdimm nls_cp437 snd_hda_codec_realtek snd_hda_codec_generic ledtrig_audio snd_hda_intel snd_intel_dspcfg snd_hda_codec snd_hwdep x86_pkg_temp_thermal snd_hda_core snd_pcm snd_timer isst_if_mbox_pci [ 8086.956029] input_leds isst_if_mmio sg snd isst_if_common soundcore wmi button sad9(O) drm fuse backlight configfs efivarfs ip_tables x_tables vmd sdhci led_class rtl8150 r8152 hid_generic pegasus mmc_block usbhid mmc_core hid megaraid_sas ixgb igb i2c_algo_bit ice i40e hpsa scsi_transport_sas e1000e e1000 e100 ax88179_178a usbnet xhci_pci sd_mod xhci_hcd t10_pi crc32c_intel crc64_rocksoft igc crc64 crc_t10dif usbcore crct10dif_generic ptp crct10dif_common usb_common pps_core [16762.543675] INFO: NMI handler (kgdb_nmi_handler) took too long to run: 8675587.593 msecs [16762.543678] INFO: NMI handler (kgdb_nmi_handler) took too long to run: 8675587.595 msecs [16762.543673] INFO: NMI handler (kgdb_nmi_handler) took too long to run: 8675587.495 msecs [16762.543679] INFO: NMI handler (kgdb_nmi_handler) took too long to run: 8675587.599 msecs [16762.543678] INFO: NMI handler (kgdb_nmi_handler) took too long to run: 8675587.598 msecs [16762.543690] INFO: NMI handler (kgdb_nmi_handler) took too long to run: 8675587.605 msecs [16762.543684] INFO: NMI handler (kgdb_nmi_handler) took too long to run: 8675587.599 msecs [16762.543693] INFO: NMI handler (kgdb_nmi_handler) took too long to run: 8675587.613 msecs [16762.543784] ---[ end trace 0000000000000000 ]--- [16762.849099] RIP: 0010:dql_completed+0x148/0x160 PANIC: Fatal exception in interrupt Fixes: 9b275176270e ("igc: Add ndo_tx_timeout support") Tested-by: Alejandra Victoria Alcaraz <alejandra.victoria.alcaraz@intel.com> Signed-off-by: Muhammad Husaini Zulkifli <muhammad.husaini.zulkifli@intel.com> Acked-by: Sasha Neftin <sasha.neftin@intel.com> Tested-by: Naama Meir <naamax.meir@linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-07-26net: dsa: qca8k: fix mdb add/del case with 0 VIDChristian Marangi1-0/+6
The qca8k switch doesn't support using 0 as VID and require a default VID to be always set. MDB add/del function doesn't currently handle this and are currently setting the default VID. Fix this by correctly handling this corner case and internally use the default VID for VID 0 case. Fixes: ba8f870dfa63 ("net: dsa: qca8k: add support for mdb_add/del") Signed-off-by: Christian Marangi <ansuelsmth@gmail.com> Cc: stable@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
2023-07-26net: dsa: qca8k: fix broken search_and_delChristian Marangi1-0/+4
On deleting an MDB entry for a port, fdb_search_and_del is used. An FDB entry can't be modified so it needs to be deleted and readded again with the new portmap (and the port deleted as requested) We use the SEARCH operator to search the entry to edit by vid and mac address and then we check the aging if we actually found an entry. Currently the code suffer from a bug where the searched fdb entry is never read again with the found values (if found) resulting in the code always returning -EINVAL as aging was always 0. Fix this by correctly read the fdb entry after it was searched. Fixes: ba8f870dfa63 ("net: dsa: qca8k: add support for mdb_add/del") Signed-off-by: Christian Marangi <ansuelsmth@gmail.com> Cc: stable@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
2023-07-26net: dsa: qca8k: fix search_and_insert wrong handling of new ruleChristian Marangi1-3/+6
On inserting a mdb entry, fdb_search_and_insert is used to add a port to the qca8k target entry in the FDB db. A FDB entry can't be modified so it needs to be removed and insert again with the new values. To detect if an entry already exist, the SEARCH operation is used and we check the aging of the entry. If the entry is not 0, the entry exist and we proceed to delete it. Current code have 2 main problem: - The condition to check if the FDB entry exist is wrong and should be the opposite. - When a FDB entry doesn't exist, aging was never actually set to the STATIC value resulting in allocating an invalid entry. Fix both problem by adding aging support to the function, calling the function with STATIC as aging by default and finally by correct the condition to check if the entry actually exist. Fixes: ba8f870dfa63 ("net: dsa: qca8k: add support for mdb_add/del") Signed-off-by: Christian Marangi <ansuelsmth@gmail.com> Cc: stable@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
2023-07-26net: dsa: qca8k: enable use_single_write for qca8xxxChristian Marangi1-2/+5
The qca8xxx switch supports 2 way to write reg values, a slow way using mdio and a fast way by sending specially crafted mgmt packet to read/write reg. The fast way can support up to 32 bytes of data as eth packet are used to send/receive. This correctly works for almost the entire regmap of the switch but with the use of some kernel selftests for dsa drivers it was found a funny and interesting hw defect/limitation. For some specific reg, bulk write won't work and will result in writing only part of the requested regs resulting in half data written. This was especially hard to track and discover due to the total strangeness of the problem and also by the specific regs where this occurs. This occurs in the specific regs of the ATU table, where multiple entry needs to be written to compose the entire entry. It was discovered that with a bulk write of 12 bytes on QCA8K_REG_ATU_DATA0 only QCA8K_REG_ATU_DATA0 and QCA8K_REG_ATU_DATA2 were written, but QCA8K_REG_ATU_DATA1 was always zero. Tcpdump was used to make sure the specially crafted packet was correct and this was confirmed. The problem was hard to track as the lack of QCA8K_REG_ATU_DATA1 resulted in an entry somehow possible as the first bytes of the mac address are set in QCA8K_REG_ATU_DATA0 and the entry type is set in QCA8K_REG_ATU_DATA2. Funlly enough writing QCA8K_REG_ATU_DATA1 results in the same problem with QCA8K_REG_ATU_DATA2 empty and QCA8K_REG_ATU_DATA1 and QCA8K_REG_ATU_FUNC correctly written. A speculation on the problem might be that there are some kind of indirection internally when accessing these regs and they can't be accessed all together, due to the fact that it's really a table mapped somewhere in the switch SRAM. Even more funny is the fact that every other reg was tested with all kind of combination and they are not affected by this problem. Read operation was also tested and always worked so it's not affected by this problem. The problem is not present if we limit writing a single reg at times. To handle this hardware defect, enable use_single_write so that bulk api can correctly split the write in multiple different operation effectively reverting to a non-bulk write. Cc: Mark Brown <broonie@kernel.org> Fixes: c766e077d927 ("net: dsa: qca8k: convert to regmap read/write API") Signed-off-by: Christian Marangi <ansuelsmth@gmail.com> Cc: stable@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
2023-07-26net: ipa: only reset hashed tables when supportedAlex Elder1-9/+11
Last year, the code that manages GSI channel transactions switched from using spinlock-protected linked lists to using indexes into the ring buffer used for a channel. Recently, Google reported seeing transaction reference count underflows occasionally during shutdown. Doug Anderson found a way to reproduce the issue reliably, and bisected the issue to the commit that eliminated the linked lists and the lock. The root cause was ultimately determined to be related to unused transactions being committed as part of the modem shutdown cleanup activity. Unused transactions are not normally expected (except in error cases). The modem uses some ranges of IPA-resident memory, and whenever it shuts down we zero those ranges. In ipa_filter_reset_table() a transaction is allocated to zero modem filter table entries. If hashing is not supported, hashed table memory should not be zeroed. But currently nothing prevents that, and the result is an unused transaction. Something similar occurs when we zero routing table entries for the modem. By preventing any attempt to clear hashed tables when hashing is not supported, the reference count underflow is avoided in this case. Note that there likely remains an issue with properly freeing unused transactions (if they occur due to errors). This patch addresses only the underflows that Google originally reported. Cc: <stable@vger.kernel.org> # 6.1.x Fixes: d338ae28d8a8 ("net: ipa: kill all other transaction lists") Tested-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Alex Elder <elder@linaro.org> Link: https://lore.kernel.org/r/20230724224055.1688854-1-elder@linaro.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-07-26macvlan: add forgotten nla_policy for IFLA_MACVLAN_BC_CUTOFFLin Ma1-0/+1
The previous commit 954d1fa1ac93 ("macvlan: Add netlink attribute for broadcast cutoff") added one additional attribute named IFLA_MACVLAN_BC_CUTOFF to allow broadcast cutfoff. However, it forgot to describe the nla_policy at macvlan_policy (drivers/net/macvlan.c). Hence, this suppose NLA_S32 (4 bytes) integer can be faked as empty (0 bytes) by a malicious user, which could leads to OOB in heap just like CVE-2023-3773. To fix it, this commit just completes the nla_policy description for IFLA_MACVLAN_BC_CUTOFF. This enforces the length check and avoids the potential OOB read. Fixes: 954d1fa1ac93 ("macvlan: Add netlink attribute for broadcast cutoff") Signed-off-by: Lin Ma <linma@zju.edu.cn> Reviewed-by: Simon Horman <simon.horman@corigine.com> Link: https://lore.kernel.org/r/20230723080205.3715164-1-linma@zju.edu.cn Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-07-25platform/x86: huawei-wmi: Silence ambient light sensorKonstantin Shelekhin1-0/+2
Currently huawei-wmi causes a lot of spam in dmesg on my Huawei MateBook X Pro 2022: ... [36409.328463] input input9: Unknown key pressed, code: 0x02c1 [36411.335104] input input9: Unknown key pressed, code: 0x02c1 [36412.338674] input input9: Unknown key pressed, code: 0x02c1 [36414.848564] input input9: Unknown key pressed, code: 0x02c1 [36416.858706] input input9: Unknown key pressed, code: 0x02c1 ... Fix that by ignoring events generated by ambient light sensor. This issue was reported on GitHub and resolved with the following merge request: https://github.com/aymanbagabas/Huawei-WMI/pull/70 I've contacted the mainter of this repo and he gave me the "go ahead" to send this patch to the maling list. Signed-off-by: Konstantin Shelekhin <k.shelekhin@ftml.net> Link: https://lore.kernel.org/r/20230722155922.173856-1-k.shelekhin@ftml.net Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2023-07-25platform/x86: msi-laptop: Fix rfkill out-of-sync on MSI Wind U100Maxim Mikityanskiy1-4/+4
Only the HW rfkill state is toggled on laptops with quirks->ec_read_only (so far only MSI Wind U90/U100). There are, however, a few issues with the implementation: 1. The initial HW state is always unblocked, regardless of the actual state on boot, because msi_init_rfkill only sets the SW state, regardless of ec_read_only. 2. The initial SW state corresponds to the actual state on boot, but it can't be changed afterwards, because set_device_state returns -EOPNOTSUPP. It confuses the userspace, making Wi-Fi and/or Bluetooth unusable if it was blocked on boot, and breaking the airplane mode if the rfkill was unblocked on boot. Address the above issues by properly initializing the HW state on ec_read_only laptops and by allowing the userspace to toggle the SW state. Don't set the SW state ourselves and let the userspace fully control it. Toggling the SW state is a no-op, however, it allows the userspace to properly toggle the airplane mode. The actual SW radio disablement is handled by the corresponding rtl818x_pci and btusb drivers that have their own rfkills. Tested on MSI Wind U100 Plus, BIOS ver 1.0G, EC ver 130. Fixes: 0816392b97d4 ("msi-laptop: merge quirk tables to one") Fixes: 0de6575ad0a8 ("msi-laptop: Add MSI Wind U90/U100 support") Signed-off-by: Maxim Mikityanskiy <maxtram95@gmail.com> Link: https://lore.kernel.org/r/20230721145423.161057-1-maxtram95@gmail.com Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2023-07-25platform/x86: asus-wmi: Fix setting RGB mode on some TUF laptopsKristian Angelov1-2/+12
This patch fixes setting the cmd values to 0xb3 and 0xb4. This is necessary on some TUF laptops in order to set the RGB mode. Closes: https://lore.kernel.org/platform-driver-x86/443078148.491022.1677576298133@nm83.abv.bg Signed-off-by: Kristian Angelov <kristiana2000@abv.bg> Reviewed-by: Luke D. Jones <luke@ljones.dev> Link: https://lore.kernel.org/r/ZLlS7o6UdTUBkyqa@wyvern.localdomain Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2023-07-25platform/x86: think-lmi: Use kfree_sensitive instead of kfreeWang Ming1-2/+2
key might contain private part of the key, so better use kfree_sensitive to free it. Signed-off-by: Wang Ming <machel@vivo.com> Link: https://lore.kernel.org/r/20230717101114.18966-1-machel@vivo.com Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2023-07-25platform/x86/intel/hid: Add HP Dragonfly G2 to VGBS DMI quirksMaxim Mikityanskiy1-0/+6
HP Elite Dragonfly G2 (a convertible laptop/tablet) has a reliable VGBS method. If VGBS is not called on boot, the firmware sends an initial 0xcd event shortly after calling the BTNL method, but only if the device is booted in the laptop mode. However, if the device is booted in the tablet mode and VGBS is not called, there is no initial 0xcc event, and the input device for SW_TABLET_MODE is not registered up until the user turns the device into the laptop mode. Call VGBS on boot on this device to get the initial state of SW_TABLET_MODE in a reliable way. Tested with BIOS 1.13.1. Signed-off-by: Maxim Mikityanskiy <maxtram95@gmail.com> Link: https://lore.kernel.org/r/20230716183213.64173-1-maxtram95@gmail.com Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2023-07-25platform/x86: intel: hid: Always call BTNL ACPI methodHans de Goede1-12/+9
On a HP Elite Dragonfly G2 the 0xcc and 0xcd events for SW_TABLET_MODE are only send after the BTNL ACPI method has been called. Likely more devices need this, so make the BTNL ACPI method unconditional instead of only doing it on devices with a 5 button array. Note this also makes the intel_button_array_enable() call in probe() unconditional, that function does its own priv->array check. This makes the intel_button_array_enable() call in probe() consistent with the calls done on suspend/resume which also rely on the priv->array check inside the function. Reported-by: Maxim Mikityanskiy <maxtram95@gmail.com> Closes: https://lore.kernel.org/platform-driver-x86/20230712175023.31651-1-maxtram95@gmail.com/ Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20230715181516.5173-1-hdegoede@redhat.com
2023-07-25platform/x86/amd/pmf: Notify OS power slider updateShyam Sundar S K4-6/+114
APMF fn8 can notify EC about the OS slider position change. Add this capability to the PMF driver so that it can call the APMF fn8 based on the changes in the Platform profile events. Co-developed-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Patil Rajesh Reddy <Patil.Reddy@amd.com> Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com> Link: https://lore.kernel.org/r/20230714144435.1239776-2-Shyam-sundar.S-k@amd.com Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2023-07-25platform/x86/amd/pmf: reduce verbosity of apmf_get_system_paramsShyam Sundar S K1-1/+1
apmf_get_system_params() failure is not a critical event, reduce its verbosity from dev_err to dev_dbg. Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com> Link: https://lore.kernel.org/r/20230714144435.1239776-1-Shyam-sundar.S-k@amd.com Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2023-07-25net: stmmac: Apply redundant write work around on 4.xx tooVincent Whitchurch1-1/+3
commit a3a57bf07de23fe1ff779e0fdf710aa581c3ff73 ("net: stmmac: work around sporadic tx issue on link-up") worked around a problem with TX sometimes not working after a link-up by avoiding a redundant write to MAC_CTRL_REG (aka GMAC_CONFIG), since the IP appeared to have problems with handling multiple writes to that register in some cases. That commit however only added the work around to dwmac_lib.c (apart from the common code in stmmac_main.c), but my systems with version 4.21a of the IP exhibit the same problem, so add the work around to dwmac4_lib.c too. Fixes: a3a57bf07de2 ("net: stmmac: work around sporadic tx issue on link-up") Signed-off-by: Vincent Whitchurch <vincent.whitchurch@axis.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Link: https://lore.kernel.org/r/20230721-stmmac-tx-workaround-v1-1-9411cbd5ee07@axis.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-07-25octeontx2-af: Fix hash extraction enable configurationSuman Ghosh2-5/+46
As of today, hash extraction support is enabled for all the silicons. Because of which we are facing initialization issues when the silicon does not support hash extraction. During creation of the hardware parsing table for IPv6 address, we need to consider if hash extraction is enabled then extract only 32 bit, otherwise 128 bit needs to be extracted. This patch fixes the issue and configures the hardware parser based on the availability of the feature. Fixes: a95ab93550d3 ("octeontx2-af: Use hashed field in MCAM key") Signed-off-by: Suman Ghosh <sumang@marvell.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Link: https://lore.kernel.org/r/20230721061222.2632521-1-sumang@marvell.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-07-25team: reset team's flags when down link is P2P deviceHangbin Liu1-0/+9
When adding a point to point downlink to team device, we neglected to reset the team's flags, which were still using flags like BROADCAST and MULTICAST. Consequently, this would initiate ARP/DAD for P2P downlink interfaces, such as when adding a GRE device to team device. Fix this by remove multicast/broadcast flags and add p2p and noarp flags. After removing the none ethernet interface and adding an ethernet interface to team, we need to reset team interface flags. Unlike bonding interface, team do not need restore IFF_MASTER, IFF_SLAVE flags. Reported-by: Liang Li <liali@redhat.com> Closes: https://bugzilla.redhat.com/show_bug.cgi?id=2221438 Fixes: 1d76efe1577b ("team: add support for non-ethernet devices") Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-07-25bonding: reset bond's flags when down link is P2P deviceHangbin Liu1-0/+5
When adding a point to point downlink to the bond, we neglected to reset the bond's flags, which were still using flags like BROADCAST and MULTICAST. Consequently, this would initiate ARP/DAD for P2P downlink interfaces, such as when adding a GRE device to the bonding. To address this issue, let's reset the bond's flags for P2P interfaces. Before fix: 7: gre0@NONE: <POINTOPOINT,NOARP,SLAVE,UP,LOWER_UP> mtu 1500 qdisc noqueue master bond0 state UNKNOWN group default qlen 1000 link/gre6 2006:70:10::1 peer 2006:70:10::2 permaddr 167f:18:f188:: 8: bond0: <BROADCAST,MULTICAST,MASTER,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP group default qlen 1000 link/gre6 2006:70:10::1 brd 2006:70:10::2 inet6 fe80::200:ff:fe00:0/64 scope link valid_lft forever preferred_lft forever After fix: 7: gre0@NONE: <POINTOPOINT,NOARP,SLAVE,UP,LOWER_UP> mtu 1500 qdisc noqueue master bond2 state UNKNOWN group default qlen 1000 link/gre6 2006:70:10::1 peer 2006:70:10::2 permaddr c29e:557a:e9d9:: 8: bond0: <POINTOPOINT,NOARP,MASTER,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP group default qlen 1000 link/gre6 2006:70:10::1 peer 2006:70:10::2 inet6 fe80::1/64 scope link valid_lft forever preferred_lft forever Reported-by: Liang Li <liali@redhat.com> Closes: https://bugzilla.redhat.com/show_bug.cgi?id=2221438 Fixes: 872254dd6b1f ("net/bonding: Enable bonding to enslave non ARPHRD_ETHER") Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-07-25Merge branch '40GbE' of ↵Jakub Kicinski2-6/+7
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue Tony Nguyen says: ==================== Intel Wired LAN Driver Updates 2023-07-21 (i40e, iavf) This series contains updates to i40e and iavf drivers. Wang Ming corrects an error check on i40e. Jake unlocks crit_lock on allocation failure to prevent deadlock and stops re-enabling of interrupts when it's not intended for iavf. * '40GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue: iavf: check for removal state before IAVF_FLAG_PF_COMMS_FAILED iavf: fix potential deadlock on allocation failure i40e: Fix an NULL vs IS_ERR() bug for debugfs_create_dir() ==================== Link: https://lore.kernel.org/r/20230721155812.1292752-1-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-07-25Merge tag 'linux-can-fixes-for-6.5-20230724' of ↵Jakub Kicinski1-0/+2
git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can Marc Kleine-Budde says: ==================== pull-request: can 2023-07-24 The first patch is by me and adds a missing set of CAN state to CAN_STATE_STOPPED on close in the gs_usb driver. The last patch is by Eric Dumazet and fixes a lockdep issue in the CAN raw protocol. * tag 'linux-can-fixes-for-6.5-20230724' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can: can: raw: fix lockdep issue in raw_release() can: gs_usb: gs_can_close(): add missing set of CAN state to CAN_STATE_STOPPED ==================== Link: https://lore.kernel.org/r/20230724150141.766047-1-mkl@pengutronix.de Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-07-25ice: Fix memory management in ice_ethtool_fdir.cJedrzej Jagielski1-12/+14
Fix ethtool FDIR logic to not use memory after its release. In the ice_ethtool_fdir.c file there are 2 spots where code can refer to pointers which may be missing. In the ice_cfg_fdir_xtrct_seq() function seg may be freed but even then may be still used by memcpy(&tun_seg[1], seg, sizeof(*seg)). In the ice_add_fdir_ethtool() function struct ice_fdir_fltr *input may first fail to be added via ice_fdir_update_list_entry() but then may be deleted by ice_fdir_update_list_entry. Terminate in both cases when the returned value of the previous operation is other than 0, free memory and don't use it anymore. Reported-by: Michal Schmidt <mschmidt@redhat.com> Link: https://bugzilla.redhat.com/show_bug.cgi?id=2208423 Fixes: cac2a27cd9ab ("ice: Support IPv4 Flow Director filters") Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Signed-off-by: Jedrzej Jagielski <jedrzej.jagielski@intel.com> Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Link: https://lore.kernel.org/r/20230721155854.1292805-1-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-07-25net: fec: avoid tx queue timeout when XDP is enabledWei Fang1-0/+2
According to the implementation of XDP of FEC driver, the XDP path shares the transmit queues with the kernel network stack, so it is possible to lead to a tx timeout event when XDP uses the tx queue pretty much exclusively. And this event will cause the reset of the FEC hardware. To avoid timeout in this case, we use the txq_trans_cond_update() interface to update txq->trans_start to jiffies so that watchdog won't generate a transmit timeout warning. Fixes: 6d6b39f180b8 ("net: fec: add initial XDP support") Signed-off-by: Wei Fang <wei.fang@nxp.com> Link: https://lore.kernel.org/r/20230721083559.2857312-1-wei.fang@nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-07-25ethernet: atheros: fix return value check in atl1e_tso_csum()Yuanjun Gong1-2/+5
in atl1e_tso_csum, it should check the return value of pskb_trim(), and return an error code if an unexpected value is returned by pskb_trim(). Fixes: a6a5325239c2 ("atl1e: Atheros L1E Gigabit Ethernet driver") Signed-off-by: Yuanjun Gong <ruc_gongyuanjun@163.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Link: https://lore.kernel.org/r/20230720144219.39285-1-ruc_gongyuanjun@163.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-07-25atheros: fix return value check in atl1_tso()Yuanjun Gong1-2/+5
in atl1_tso(), it should check the return value of pskb_trim(), and return an error code if an unexpected value is returned by pskb_trim(). Fixes: 401c0aabec4b ("atl1: simplify tx packet descriptor") Signed-off-by: Yuanjun Gong <ruc_gongyuanjun@163.com> Link: https://lore.kernel.org/r/20230722142511.12448-1-ruc_gongyuanjun@163.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-07-25Merge tag 'scsi-fixes' of ↵Linus Torvalds1-3/+4
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull SCSI fix from James Bottomley: "A single fix for a potential regression over a misunderstanding of the blk_get_queue() api" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: sg: Fix checking return value of blk_get_queue()
2023-07-24Merge tag 'media/v6.5-2' of ↵Linus Torvalds15-137/+116
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media Pull media fixes from Mauro Carvalho Chehab: - some warning fixes - verisilicon: an excessive usage of stack fix and changes at reg access - amphion: use dev_err_probe - pulse8-cec: handle possible ping error - imx-jpeg: Support to assign slot for encoder/decoder - amphion: Fix firmware path to match linux-firmware - pci: cx23885: fix error handling for cx23885 ATSC boards - staging: atomisp: select V4L2_FWNODE - mediatek: vcodec: fix cancel_work_sync fail with fluster test * tag 'media/v6.5-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: media: verisilicon: change confusingly named relaxed register access media: verisilicon: fix excessive stack usage media: mediatek: vcodec: fix cancel_work_sync fail with fluster test media: pci: cx23885: fix error handling for cx23885 ATSC boards media: pulse8-cec: handle possible ping error media: mtk_jpeg_core: avoid unused-variable warning media: imx-jpeg: Support to assign slot for encoder/decoder media: amphion: Fix firmware path to match linux-firmware media: amphion: use dev_err_probe media: staging: atomisp: select V4L2_FWNODE media: tc358746: Address compiler warnings
2023-07-24phy: hisilicon: Fix an out of bounds check in hisi_inno_phy_probe()Harshit Mogalapalli1-1/+1
The size of array 'priv->ports[]' is INNO_PHY_PORT_NUM. In the for loop, 'i' is used as the index for array 'priv->ports[]' with a check (i > INNO_PHY_PORT_NUM) which indicates that INNO_PHY_PORT_NUM is allowed value for 'i' in the same loop. This > comparison needs to be changed to >=, otherwise it potentially leads to an out of bounds write on the next iteration through the loop Fixes: ba8b0ee81fbb ("phy: add inno-usb2-phy driver for hi3798cv200 SoC") Reported-by: Dan Carpenter <dan.carpenter@linaro.org> Signed-off-by: Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com> Link: https://lore.kernel.org/r/20230721090558.3588613-1-harshit.m.mogalapalli@oracle.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2023-07-24vxlan: fix GRO with VXLAN-GPEJiri Benc1-15/+69
In VXLAN-GPE, there may not be an Ethernet header following the VXLAN header. But in GRO, the vxlan driver calls eth_gro_receive unconditionally, which means the following header is incorrectly parsed as Ethernet. Introduce GPE specific GRO handling. For better performance, do not check for GPE during GRO but rather install a different set of functions at setup time. Fixes: e1e5314de08ba ("vxlan: implement GPE") Reported-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Jiri Benc <jbenc@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-07-24vxlan: generalize vxlan_parse_gpe_hdr and remove unused argsJiri Benc1-30/+28
The vxlan_parse_gpe_hdr function extracts the next protocol value from the GPE header and marks GPE bits as parsed. In order to be used in the next patch, split the function into protocol extraction and bit marking. The bit marking is meaningful only in vxlan_rcv; move it directly there. Rename the function to vxlan_parse_gpe_proto to reflect what it now does. Remove unused arguments skb and vxflags. Move the function earlier in the file to allow it to be called from more places in the next patch. Signed-off-by: Jiri Benc <jbenc@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-07-24ethernet: atheros: fix return value check in atl1c_tso_csum()Yuanjun Gong1-2/+5
in atl1c_tso_csum, it should check the return value of pskb_trim(), and return an error code if an unexpected value is returned by pskb_trim(). Signed-off-by: Yuanjun Gong <ruc_gongyuanjun@163.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-07-24vxlan: calculate correct header length for GPEJiri Benc2-14/+11
VXLAN-GPE does not add an extra inner Ethernet header. Take that into account when calculating header length. This causes problems in skb_tunnel_check_pmtu, where incorrect PMTU is cached. In the collect_md mode (which is the only mode that VXLAN-GPE supports), there's no magic auto-setting of the tunnel interface MTU. It can't be, since the destination and thus the underlying interface may be different for each packet. So, the administrator is responsible for setting the correct tunnel interface MTU. Apparently, the administrators are capable enough to calculate that the maximum MTU for VXLAN-GPE is (their_lower_MTU - 36). They set the tunnel interface MTU to 1464. If you run a TCP stream over such interface, it's then segmented according to the MTU 1464, i.e. producing 1514 bytes frames. Which is okay, this still fits the lower MTU. However, skb_tunnel_check_pmtu (called from vxlan_xmit_one) uses 50 as the header size and thus incorrectly calculates the frame size to be 1528. This leads to ICMP too big message being generated (locally), PMTU of 1450 to be cached and the TCP stream to be resegmented. The fix is to use the correct actual header size, especially for skb_tunnel_check_pmtu calculation. Fixes: e1e5314de08ba ("vxlan: implement GPE") Signed-off-by: Jiri Benc <jbenc@redhat.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-07-24net: hns3: fix wrong bw weight of disabled tc issueJijie Shao2-4/+16
In dwrr mode, the default bandwidth weight of disabled tc is set to 0. If the bandwidth weight is 0, the mode will change to sp. Therefore, disabled tc default bandwidth weight need changed to 1, and 0 is returned when query the bandwidth weight of disabled tc. In addition, driver need stop configure bandwidth weight if tc is disabled. Fixes: 848440544b41 ("net: hns3: Add support of TX Scheduler & Shaper to HNS3 driver") Signed-off-by: Jie Wang <wangjie125@huawei.com> Signed-off-by: Jijie Shao <shaojijie@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-07-24net: hns3: fix wrong tc bandwidth weight data issueJijie Shao1-2/+1
Currently, the weight saved by the driver is used as the query result, which may be different from the actual weight in the register. Therefore, the register value read from the firmware is used as the query result Fixes: 0e32038dc856 ("net: hns3: refactor dump tc of debugfs") Signed-off-by: Jijie Shao <shaojijie@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-07-24net: hns3: add tm flush when setting tmHao Lan7-6/+73
When the tm module is configured with traffic, traffic may be abnormal. This patch fixes this problem. Before the tm module is configured, traffic processing should be stopped. After the tm module is configured, traffic processing is enabled. Signed-off-by: Hao Lan <lanhao@huawei.com> Signed-off-by: Jijie Shao <shaojijie@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-07-24net: hns3: fix the imp capability bit cannot exceed 32 bits issueHao Lan2-4/+20
Current only the first 32 bits of the capability flag bit are considered. When the matching capability flag bit is greater than 31 bits, it will get an error bit.This patch use bitmap to solve this issue. It can handle each capability bit whitout bit width limit. Fixes: da77aef9cc58 ("net: hns3: create common cmdq resource allocate/free/query APIs") Signed-off-by: Hao Lan <lanhao@huawei.com> Signed-off-by: Jijie Shao <shaojijie@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-07-23net: phy: marvell10g: fix 88x3310 power upJiawen Wu1-0/+7
Clear MV_V2_PORT_CTRL_PWRDOWN bit to set power up for 88x3310 PHY, it sometimes does not take effect immediately. And a read of this register causes the bit not to clear. This will cause mv3310_reset() to time out, which will fail the config initialization. So add a delay before the next access. Fixes: c9cc1c815d36 ("net: phy: marvell10g: place in powersave mode at probe") Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com> Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-07-22Merge tag 's390-6.5-3' of ↵Linus Torvalds1-11/+24
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull s390 fixes from Heiko Carstens: - Fix per vma lock fault handling: add missing !(fault & VM_FAULT_ERROR) check to fault handler to prevent error handling for return values that don't indicate an error - Use kfree_sensitive() instead of kfree() in paes crypto code to clear memory that may contain keys before freeing it - Fix reply buffer size calculation for CCA replies in zcrypt device driver * tag 's390-6.5-3' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: s390/zcrypt: fix reply buffer calculations for CCA replies s390/crypto: use kfree_sensitive() instead of kfree() s390/mm: fix per vma lock fault handling
2023-07-22Merge tag 'block-6.5-2023-07-21' of git://git.kernel.dk/linuxLinus Torvalds1-2/+38
Pull block fixes from Jens Axboe: - Fix for loop regressions (Mauricio) - Fix a potential stall with batched wakeups in sbitmap (David) - Fix for stall with recursive plug flushes (Ross) - Skip accounting of empty requests for blk-iocost (Chengming) - Remove a dead field in struct blk_mq_hw_ctx (Chengming) * tag 'block-6.5-2023-07-21' of git://git.kernel.dk/linux: loop: do not enforce max_loop hard limit by (new) default loop: deprecate autoloading callback loop_probe() sbitmap: fix batching wakeup blk-iocost: skip empty flush bio in iocost blk-mq: delete dead struct blk_mq_hw_ctx->queued field blk-mq: Fix stall due to recursive flush plug
2023-07-22Merge tag 'devicetree-fixes-for-6.5-1' of ↵Linus Torvalds2-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux Pull devicetree fixes from Rob Herring: - Fix moortec,mr75203 schema usage of 'multipleOf' keyword - Fix regression in systems depending on "of-display" device name - Build fix for s390 with CONFIG_PCI=n and OF_EARLY_FLATTREE=y - Drop two obsolete serial .txt bindings * tag 'devicetree-fixes-for-6.5-1' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: dt-bindings: serial: Remove obsolete nxp,lpc1850-uart.txt dt-bindings: serial: Remove obsolete cavium-uart.txt dt-bindings: hwmon: moortec,mr75203: fix multipleOf for coefficients of: Preserve "of-display" device name for compatibility of: make OF_EARLY_FLATTREE depend on HAS_IOMEM
2023-07-22Merge tag 'regmap-fix-v6.5-rc2' of ↵Linus Torvalds6-12/+16
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap Pull regmap fixes from Mark Brown: "Three fixes here: - The issues with accounting for register and padding length on raw buses turn out to be quite widespread in custom buses. In order to avoid disturbing anything drop the initial fixes and fall back to a point fix in the SMBus code where the issue was originally noticed, a more substantial refactoring of the API which ensures that all buses make the same assumptions will follow. - The generic regcache code had been forcing on async I/O which did not work with the new maple tree sync code when used with SPI. Since that was mainly for the rbtree cache and the assumptions about hardware that drove the choice are probably not true any more fix this by pushing the enablement of async down into the rbtree code. This probably also makes cache syncs for systems faster though it's not the point. - The test code was triggering use of the rbtree and maple tree caches with dynamic allocation of nodes since all the testing is with RAM backed caches with no I/O performance issues. Just disable the locking in the tests to avoid triggering warnings when allocation debugging is turned on, it's not really what's being tested" * tag 'regmap-fix-v6.5-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap: regmap: Disable locking for RBTREE and MAPLE unit tests regcache: Push async I/O request down into the rbtree cache regmap: Account for register length in SMBus I/O limits regmap: Drop initial version of maximum transfer length fixes
2023-07-22Merge tag 'gpio-fixes-for-v6.5-rc3' of ↵Linus Torvalds2-14/+18
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux Pull gpio fixes from Bartosz Golaszewski: - fix initial value handling for output-only pins in gpio-tps68470 - fix two resource leaks in gpio-mvebu * tag 'gpio-fixes-for-v6.5-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: gpio: mvebu: fix irq domain leak gpio: mvebu: Make use of devm_pwmchip_add gpio: tps68470: Make tps68470_gpio_output() always set the initial value
2023-07-21loop: do not enforce max_loop hard limit by (new) defaultMauricio Faria de Oliveira1-2/+34
Problem: The max_loop parameter is used for 2 different purposes: 1) initial number of loop devices to pre-create on init 2) maximum number of loop devices to add on access/open() Historically, its default value (zero) caused 1) to create non-zero number of devices (CONFIG_BLK_DEV_LOOP_MIN_COUNT), and no hard limit on 2) to add devices with autoloading. However, the default value changed in commit 85c50197716c ("loop: Fix the max_loop commandline argument treatment when it is set to 0") to CONFIG_BLK_DEV_LOOP_MIN_COUNT, for max_loop=0 not to pre-create devices. That does improve 1), but unfortunately it breaks 2), as the default behavior changed from no-limit to hard-limit. Example: For example, this userspace code broke for N >= CONFIG, if the user relied on the default value 0 for max_loop: mknod("/dev/loopN"); open("/dev/loopN"); // now fails with ENXIO Though affected users may "fix" it with (loop.)max_loop=0, this means to require a kernel parameter change on stable kernel update (that commit Fixes: an old commit in stable). Solution: The original semantics for the default value in 2) can be applied if the parameter is not set (ie, default behavior). This still keeps the intended function in 1) and 2) if set, and that commit's intended improvement in 1) if max_loop=0. Before 85c50197716c: - default: 1) CONFIG devices 2) no limit - max_loop=0: 1) CONFIG devices 2) no limit - max_loop=X: 1) X devices 2) X limit After 85c50197716c: - default: 1) CONFIG devices 2) CONFIG limit (*) - max_loop=0: 1) 0 devices (*) 2) no limit - max_loop=X: 1) X devices 2) X limit This commit: - default: 1) CONFIG devices 2) no limit (*) - max_loop=0: 1) 0 devices 2) no limit - max_loop=X: 1) X devices 2) X limit Future: The issue/regression from that commit only affects code under the CONFIG_BLOCK_LEGACY_AUTOLOAD deprecation guard, thus the fix too is contained under it. Once that deprecated functionality/code is removed, the purpose 2) of max_loop (hard limit) is no longer in use, so the module parameter description can be changed then. Tests: Linux 6.4-rc7 CONFIG_BLK_DEV_LOOP_MIN_COUNT=8 CONFIG_BLOCK_LEGACY_AUTOLOAD=y - default (original) # ls -1 /dev/loop* /dev/loop-control /dev/loop0 ... /dev/loop7 # ./test-loop open: /dev/loop8: No such device or address - default (patched) # ls -1 /dev/loop* /dev/loop-control /dev/loop0 ... /dev/loop7 # ./test-loop # - max_loop=0 (original & patched): # ls -1 /dev/loop* /dev/loop-control # ./test-loop # - max_loop=8 (original & patched): # ls -1 /dev/loop* /dev/loop-control /dev/loop0 ... /dev/loop7 # ./test-loop open: /dev/loop8: No such device or address - max_loop=0 (patched; CONFIG_BLOCK_LEGACY_AUTOLOAD is not set) # ls -1 /dev/loop* /dev/loop-control # ./test-loop open: /dev/loop8: No such device or address Fixes: 85c50197716c ("loop: Fix the max_loop commandline argument treatment when it is set to 0") Signed-off-by: Mauricio Faria de Oliveira <mfo@canonical.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/20230720143033.841001-3-mfo@canonical.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
generated by cgit v1.2.3 (git 2.39.0) at 2024-09-29 15:19:53 +0300