summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)AuthorFilesLines
2022-07-22Bluetooth: btrtl: Fix typo in commentshaomin Deng1-1/+1
Delete the repeated word "that" in comments. Signed-off-by: shaomin Deng <dengshaomin@cdjrlc.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2022-07-22Bluetooth: btusb: Remove HCI_QUIRK_BROKEN_ERR_DATA_REPORTING for fake CSRZijun Hu1-1/+0
Core driver addtionally checks LMP feature bit "Erroneous Data Reporting" instead of quirk HCI_QUIRK_BROKEN_ERR_DATA_REPORTING to decide if HCI commands HCI_Read|Write_Default_Erroneous_Data_Reporting are broken, so remove this unnecessary quirk for fake CSR controllers. Signed-off-by: Zijun Hu <quic_zijuhu@quicinc.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2022-07-22Bluetooth: btusb: Remove HCI_QUIRK_BROKEN_ERR_DATA_REPORTING for QCAZijun Hu1-1/+0
Core driver addtionally checks LMP feature bit "Erroneous Data Reporting" instead of quirk HCI_QUIRK_BROKEN_ERR_DATA_REPORTING to decide if HCI commands HCI_Read|Write_Default_Erroneous_Data_Reporting are broken, so remove this unnecessary quirk for QCA controllers. The reason why these two HCI commands are broken for QCA controllers is that feature "Erroneous Data Reporting" is not enabled by their firmware as shown by below log: @ RAW Open: hcitool (privileged) version 2.22 < HCI Command: Read Local Supported Commands (0x04|0x0002) plen 0 > HCI Event: Command Complete (0x0e) plen 68 Read Local Supported Commands (0x04|0x0002) ncmd 1 Status: Success (0x00) Commands: 288 entries ...... Read Default Erroneous Data Reporting (Octet 18 - Bit 2) Write Default Erroneous Data Reporting (Octet 18 - Bit 3) ...... < HCI Command: Read Default Erroneous Data Reporting (0x03|0x005a) plen 0 > HCI Event: Command Complete (0x0e) plen 4 Read Default Erroneous Data Reporting (0x03|0x005a) ncmd 1 Status: Unknown HCI Command (0x01) < HCI Command: Read Local Supported Features (0x04|0x0003) plen 0 > HCI Event: Command Complete (0x0e) plen 12 Read Local Supported Features (0x04|0x0003) ncmd 1 Status: Success (0x00) Features: 0xff 0xfe 0x0f 0xfe 0xd8 0x3f 0x5b 0x87 3 slot packets ...... Signed-off-by: Zijun Hu <quic_zijuhu@quicinc.com> Tested-by: Zijun Hu <quic_zijuhu@quicinc.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2022-07-22Bluetooth: btusb: Add a new VID/PID 0489/e0e2 for MT7922He Wang1-0/+3
Add VID/PID 0489:e0e2 for MediaTek MT7922 Bluetooth chip. Found and tested with Asus UM5302TA. From /sys/kernel/debug/usb/devices: T: Bus=03 Lev=01 Prnt=01 Port=02 Cnt=01 Dev#= 2 Spd=480 MxCh= 0 D: Ver= 2.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=0489 ProdID=e0e2 Rev= 1.00 S: Manufacturer=MediaTek Inc. S: Product=Wireless_Device S: SerialNumber=000000000 C:* #Ifs= 3 Cfg#= 1 Atr=e0 MxPwr=100mA A: FirstIf#= 0 IfCount= 3 Cls=e0(wlcon) Sub=01 Prot=01 I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=125us E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms I: If#= 1 Alt= 6 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 63 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 63 Ivl=1ms I:* If#= 2 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none) E: Ad=8a(I) Atr=03(Int.) MxPS= 64 Ivl=125us E: Ad=0a(O) Atr=03(Int.) MxPS= 64 Ivl=125us I: If#= 2 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none) E: Ad=8a(I) Atr=03(Int.) MxPS= 512 Ivl=125us E: Ad=0a(O) Atr=03(Int.) MxPS= 512 Ivl=125us Signed-off-by: He Wang <xw897002528@gmail.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2022-07-22Bluetooth: btusb: Set HCI_QUIRK_BROKEN_ENHANCED_SETUP_SYNC_CONN for MTKYuri D'Elia1-0/+1
This sets HCI_QUIRK_BROKEN_ENHANCED_SETUP_SYNC_CONN for MTK controllers since SCO appear to not work when using HCI_OP_ENHANCED_SETUP_SYNC_CONN. Link: https://bugzilla.kernel.org/show_bug.cgi?id=215576 Signed-off-by: Yuri D'Elia <wavexx@thregr.org> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2022-07-22Bluetooth: hci_bcm: Increase host baudrate for CYW55572 in autobaud modeHakan Jansson1-4/+16
Add device specific data for max baudrate in autobaud mode. This allows the host to use a baudrate higher than "init speed" when loading FW in autobaud mode. The device specific max baudrate in autobaud mode for CYW55572 is set to 921600 bps. Devices without device specific max baudrate in autobaud mode will use init speed as before. If no device specific init speed has been specified, it will default to the bcm_proto default 115200 bps. The increased baud rate improves FW load time. The exact load time will depend on the specific system and FW being used. As a rough indication, the FW load time dropped from ~9s @ 115.2kbps to ~1.7s @ 921.6kbps in one test. Signed-off-by: Hakan Jansson <hakan.jansson@infineon.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2022-07-22Bluetooth: hci_bcm: Prevent early baudrate setting in autobaud modeHakan Jansson1-4/+1
Always prevent trying to set device baudrate before calling setup() when using autobaud mode. This was previously happening for devices which had device specific data with member no_early_set_baudrate set to 0. Signed-off-by: Hakan Jansson <hakan.jansson@infineon.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2022-07-22Bluetooth: hci_bcm: Add DT compatible for CYW55572Hakan Jansson1-0/+1
CYW55572 is a Wi-Fi + Bluetooth combo device from Infineon. Signed-off-by: Hakan Jansson <hakan.jansson@infineon.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2022-07-22Bluetooth: btusb: Add Realtek RTL8852C support ID 0x13D3:0x3586Hilda Wu1-0/+2
Add the support ID(0x13D3, 0x3586) to usb_device_id table for Realtek RTL8852C. The device info from /sys/kernel/debug/usb/devices as below. T: Bus=03 Lev=01 Prnt=01 Port=02 Cnt=01 Dev#= 2 Spd=12 MxCh= 0 D: Ver= 1.00 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=13d3 ProdID=3586 Rev= 0.00 S: Manufacturer=Realtek S: Product=Bluetooth Radio S: SerialNumber=00e04c000001 C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=500mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms Signed-off-by: Hilda Wu <hildawu@realtek.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2022-07-22Bluetooth: btusb: Add Realtek RTL8852C support ID 0x13D3:0x3587Hilda Wu1-0/+2
Add the support ID(0x13D3, 0x3587) to usb_device_id table for Realtek RTL8852C. The device info from /sys/kernel/debug/usb/devices as below. T: Bus=03 Lev=01 Prnt=01 Port=02 Cnt=01 Dev#= 2 Spd=12 MxCh= 0 D: Ver= 1.00 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=13d3 ProdID=3587 Rev= 0.00 S: Manufacturer=Realtek S: Product=Bluetooth Radio S: SerialNumber=00e04c000001 C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=500mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms Signed-off-by: Hilda Wu <hildawu@realtek.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2022-07-22Bluetooth: btusb: Add Realtek RTL8852C support ID 0x0CB8:0xC558Hilda Wu1-0/+2
Add the support ID(0x0CB8, 0xC558) to usb_device_id table for Realtek RTL8852C. The device info from /sys/kernel/debug/usb/devices as below. T: Bus=03 Lev=01 Prnt=01 Port=02 Cnt=01 Dev#= 2 Spd=12 MxCh= 0 D: Ver= 1.00 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=0cb8 ProdID=c558 Rev= 0.00 S: Manufacturer=Realtek S: Product=Bluetooth Radio S: SerialNumber=00e04c000001 C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=500mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms Signed-off-by: Hilda Wu <hildawu@realtek.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2022-07-22Bluetooth: btusb: Add Realtek RTL8852C support ID 0x04C5:0x1675Hilda Wu1-0/+2
Add the support ID(0x04c5, 0x1675) to usb_device_id table for Realtek RTL8852C. The device info from /sys/kernel/debug/usb/devices as below. T: Bus=03 Lev=01 Prnt=01 Port=02 Cnt=01 Dev#= 2 Spd=12 MxCh= 0 D: Ver= 1.00 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=04c5 ProdID=1675 Rev= 0.00 S: Manufacturer=Realtek S: Product=Bluetooth Radio S: SerialNumber=00e04c000001 C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=500mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms Signed-off-by: Hilda Wu <hildawu@realtek.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2022-07-22Bluetooth: btusb: Add Realtek RTL8852C support ID 0x04CA:0x4007Hilda Wu1-0/+4
Add the support ID(0x04CA, 0x4007) to usb_device_id table for Realtek RTL8852C. The device info from /sys/kernel/debug/usb/devices as below. T: Bus=03 Lev=01 Prnt=01 Port=02 Cnt=01 Dev#= 2 Spd=12 MxCh= 0 D: Ver= 1.00 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=04ca ProdID=4007 Rev= 0.00 S: Manufacturer=Realtek S: Product=Bluetooth Radio S: SerialNumber=00e04c000001 C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=500mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms Signed-off-by: Hilda Wu <hildawu@realtek.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2022-07-22Bluetooth: Add default wakeup callback for HCI UART driverYing Hsu1-0/+11
Bluetooth HCI devices indicate if they are able to wakeup in the wakeup callback since 'commit 4539ca67fe8e ("Bluetooth: Rename driver .prevent_wake to .wakeup")'. This patch adds a default wakeup callback for Bluetooth HCI UAR devices. It assumes Bluetooth HCI UART devices are wakeable for backward compatibility. For those who need a customized behavior, one can override it before calling hci_uart_register_device(). Fixes: 4539ca67fe8e ("Bluetooth: Rename driver .prevent_wake to .wakeup") Signed-off-by: Ying Hsu <yinghsu@chromium.org> Reviewed-by: Alain Michaud <alainm@chromium.org> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2022-07-22Bluetooth: btmtksdio: Add in-band wakeup supportSean Wang1-0/+15
Commit ce64b3e94919 ("Bluetooth: mt7921s: Support wake on bluetooth") adds the wake on bluethooth via a dedicated GPIO. Extend the wake-on-bluetooth to use the SDIO DAT1 pin (in-band wakeup), when supported by the SDIO host driver. Co-developed-by: Yake Yang <yake.yang@mediatek.com> Signed-off-by: Yake Yang <yake.yang@mediatek.com> Signed-off-by: Sean Wang <sean.wang@mediatek.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2022-07-22Bluetooth: hci_bcm: Add BCM4349B1 variantAhmad Fatoum2-0/+3
The BCM4349B1, aka CYW/BCM89359, is a WiFi+BT chip and its Bluetooth portion can be controlled over serial. Two subversions are added for the chip, because ROM firmware reports 002.002.013 (at least for the chips I have here), while depending on patchram firmware revision, either 002.002.013 or 002.002.014 is reported. Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2022-07-22Bluetooth: hci_intel: Add check for platform_driver_registerJiasheng Jiang1-1/+5
As platform_driver_register() could fail, it should be better to deal with the return value in order to maintain the code consisitency. Fixes: 1ab1f239bf17 ("Bluetooth: hci_intel: Add support for platform driver") Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2022-07-22Bluetooth: hci_bcm: Add support for FW loading in autobaud modeHakan Jansson3-15/+40
Use the presence of a DT property, "brcm,requires-autobaud-mode", to enable startup in autobaud mode. If the property is present, the device is started in autobaud mode by asserting RTS (BT_UART_CTS_N) prior to powering on the device. Also prevent the use of unsupported commands for devices started in autobaud mode. Only a limited subset of HCI commands are supported in autobaud mode. Some devices (e.g. CYW5557x) require autobaud mode to enable FW loading. Autobaud mode can also be required on some boards where the controller device is using a non-standard baud rate in normal mode when first powered on. Signed-off-by: Hakan Jansson <hakan.jansson@infineon.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2022-07-22Bluetooth: hci_qca: Return wakeup for qca_wakeupSai Teja Aluvala1-1/+1
This fixes the return value of qca_wakeup(), since .wakeup work inversely with original .prevent_wake. Fixes: 4539ca67fe8ed (Bluetooth: Rename driver .prevent_wake to .wakeup) Signed-off-by: Sai Teja Aluvala <quic_saluvala@quicinc.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2022-07-22Bluetooth: btusb: Add support of IMC Networks PID 0x3568Aaron Ma1-0/+3
It is 13d3:3568 for MediaTek MT7922 USB Bluetooth chip. T: Bus=03 Lev=01 Prnt=01 Port=02 Cnt=01 Dev#= 2 Spd=480 MxCh= 0 D: Ver= 2.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=13d3 ProdID=3568 Rev=01.00 S: Manufacturer=MediaTek Inc. S: Product=Wireless_Device S: SerialNumber=... C: #Ifs= 3 Cfg#= 1 Atr=e0 MxPwr=100mA I: If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=125us E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 2 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none) E: Ad=0a(O) Atr=03(Int.) MxPS= 64 Ivl=125us E: Ad=8a(I) Atr=03(Int.) MxPS= 64 Ivl=125us Signed-off-by: Aaron Ma <aaron.ma@canonical.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2022-07-21Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski129-906/+1296
No conflicts. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-07-21Merge tag 'net-5.19-rc8' of ↵Linus Torvalds42-260/+546
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from Paolo Abeni: "Including fixes from can. Still no major regressions, most of the changes are still due to data races fixes, plus the usual bunch of drivers fixes. Previous releases - regressions: - tcp/udp: make early_demux back namespacified. - dsa: fix issues with vlan_filtering_is_global Previous releases - always broken: - ip: fix data-races around ipv4_net_table (round 2, 3 & 4) - amt: fix validation and synchronization bugs - can: fix detection of mcp251863 - eth: iavf: fix handling of dummy receive descriptors - eth: lan966x: fix issues with MAC table - eth: stmmac: dwmac-mediatek: fix clock issue Misc: - dsa: update documentation" * tag 'net-5.19-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (107 commits) mlxsw: spectrum_router: Fix IPv4 nexthop gateway indication net/sched: cls_api: Fix flow action initialization tcp: Fix data-races around sysctl_tcp_max_reordering. tcp: Fix a data-race around sysctl_tcp_abort_on_overflow. tcp: Fix a data-race around sysctl_tcp_rfc1337. tcp: Fix a data-race around sysctl_tcp_stdurg. tcp: Fix a data-race around sysctl_tcp_retrans_collapse. tcp: Fix data-races around sysctl_tcp_slow_start_after_idle. tcp: Fix a data-race around sysctl_tcp_thin_linear_timeouts. tcp: Fix data-races around sysctl_tcp_recovery. tcp: Fix a data-race around sysctl_tcp_early_retrans. tcp: Fix data-races around sysctl knobs related to SYN option. udp: Fix a data-race around sysctl_udp_l3mdev_accept. ip: Fix data-races around sysctl_ip_prot_sock. ipv4: Fix data-races around sysctl_fib_multipath_hash_fields. ipv4: Fix data-races around sysctl_fib_multipath_hash_policy. ipv4: Fix a data-race around sysctl_fib_multipath_use_neigh. can: rcar_canfd: Add missing of_node_put() in rcar_canfd_probe() can: mcp251xfd: fix detection of mcp251863 Documentation: fix udp_wmem_min in ip-sysctl.rst ...
2022-07-21net/cdc_ncm: Enable ZLP for DisplayLink ethernet devicesDominik Czerwik1-1/+24
This improves performance and stability of DL-3xxx/DL-5xxx/DL-6xxx device series. Specifically prevents device from temporary network dropouts when playing video from the web and network traffic going through is high. Signed-off-by: Dominik Czerwik <dominik.czerwik@synaptics.com> Signed-off-by: Łukasz Spintzyk <lukasz.spintzyk@synaptics.com> Link: https://lore.kernel.org/r/20220720060518.541-1-lukasz.spintzyk@synaptics.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-07-21net: ipa: move configuration data files into a subdirectoryAlex Elder7-1/+1
Reduce the clutter in the main IPA source directory by creating a new "data" subdirectory, and locating all of the configuration data files in there. Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-07-21net: ipa: list supported IPA versions in the MakefileAlex Elder1-3/+7
Create a variable in the Makefile listing the IPA versions supported by the driver. Use that to create the list of configuration data object files used (rather than listing them all individually). Add a SPDX license comment. Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-07-21net: ipa: fix an outdated commentAlex Elder1-1/+1
Since commit 8797972afff3d ("net: ipa: remove command info pool"), we don't allocate "command info" entries for command channel transactions. Fix a comment that seems to suggest we still do. (Even before that commit, the comment was out of place.) Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-07-21net: ipa: report when the driver has been removedAlex Elder1-0/+2
When the IPA driver has completed its initialization and setup stages, it emits a brief message to the log. Add a small message that reports when it has been removed. Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-07-21net: ipa: skip some cleanup for unused transactionsAlex Elder1-1/+2
In gsi_trans_free(), there's no point in ipa_gsi_trans_release() if a transaction is unused. No used TREs means no IPA layer resources to clean up. So only call ipa_gsi_trans_release() if at least one TRE was used. Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-07-21net: ipa: rearrange transaction initializationAlex Elder2-30/+33
The transaction map is really associated with the transaction pool; move its definition earlier in the gsi_trans_info structure. Rearrange initialization in gsi_channel_trans_init() so it sets the tre_avail value first, then initializes the transaction pool, and finally allocating the transaction map. Update comments. Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-07-21net: ipa: add a transaction committed listAlex Elder3-7/+29
We currently put a transaction on the pending list when it has been committed. But until the channel's doorbell rings, these transactions aren't actually "owned" by the hardware yet. Add a new "committed" state (and list), to represent transactions that have been committed but not yet sent to hardware. Define "pending" to mean committed transactions that have been sent to hardware but have not yet completed. Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-07-21net: ipa: add an endpoint device attribute groupAlex Elder3-18/+53
Create a new attribute group meant to provide a single place that defines endpoint IDs that might be needed by user space. Not all defined endpoints are presented, and only those that are defined will be made visible. The new attributes use "extended" device attributes to hold endpoint IDs, which is a little more compact and efficient. Reimplement the existing modem endpoint ID attribute files using common code. Signed-off-by: Alex Elder <elder@linaro.org> Link: https://lore.kernel.org/r/20220719191639.373249-1-elder@linaro.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-07-21net: amd8111e: remove repeated dev->features assignementJian Shen1-3/+0
It's repeated with line 1793-1795, and there isn't any other handling for it. So remove it. Signed-off-by: Jian Shen <shenjian15@huawei.com> Link: https://lore.kernel.org/r/20220719142424.4528-1-shenjian15@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-07-21Merge tag 'mlx5-updates-2022-07-17' of ↵Jakub Kicinski19-860/+1152
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux Saeed Mahameed says: ==================== mlx5-updates-2022-07-17 1) Add resiliency for lost completions for PTP TX port timestamp 2) Report Header-data split state via ethtool 3) Decouple HTB code from main regular TX code * tag 'mlx5-updates-2022-07-17' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux: net/mlx5: CT: Remove warning of ignore_flow_level support for non PF net/mlx5e: Add resiliency for PTP TX port timestamp net/mlx5: Expose ts_cqe_metadata_size2wqe_counter net/mlx5e: HTB, move htb functions to a new file net/mlx5e: HTB, change functions name to follow convention net/mlx5e: HTB, remove priv from htb function calls net/mlx5e: HTB, hide and dynamically allocate mlx5e_htb structure net/mlx5e: HTB, move stats and max_sqs to priv net/mlx5e: HTB, move section comment to the right place net/mlx5e: HTB, move ids to selq_params struct net/mlx5e: HTB, reduce visibility of htb functions net/mlx5e: Fix mqprio_rl handling on devlink reload net/mlx5e: Report header-data split state through ethtool ==================== Link: https://lore.kernel.org/r/20220719203529.51151-1-saeed@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-07-20Merge tag 'linux-can-fixes-for-5.19-20220720' of ↵David S. Miller2-5/+14
git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can Marc Kleine-Budde says: ==================== this is a pull request of 2 patches for net/master. The first patch is by me and fixes the detection of the mcp251863 in the mcp251xfd driver. The last patch is by Liang He and adds a missing of_node_put() in the rcar_canfd driver. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-20net: ipa: initialize ring indexes to 0Alex Elder2-10/+13
When a GSI channel is initially allocated, and after it has been reset, the hardware assumes its ring index is 0. And although we do initialize channels this way, the comments in the IPA code don't really explain this. For event rings, it doesn't matter what value we use initially, so using 0 is just fine. Add some information about the assumptions made by hardware above the definition of the gsi_ring structure in "gsi.h". Zero the index field for all rings (channel and event) when the ring is allocated. As a result, that function initializes all fields in the structure. Stop zeroing the index the top of gsi_channel_program(). Initially we'll use the index value set when the channel ring was allocated. And we'll explicitly zero the index value in gsi_channel_reset() before programming the hardware, adding a comment explaining why it's required. For event rings, use the index initialized by gsi_ring_alloc() rather than 0 when ringing the doorbell in gsi_evt_ring_program(). (It'll still be zero, but we won't assume that to be the case.) Use a local variable in gsi_evt_ring_program() that represents the address of the event ring's ring structure. Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-20mlxsw: spectrum_router: Fix IPv4 nexthop gateway indicationIdo Schimmel1-1/+1
mlxsw needs to distinguish nexthops with a gateway from connected nexthops in order to write the former to the adjacency table of the device. The check used to rely on the fact that nexthops with a gateway have a 'link' scope whereas connected nexthops have a 'host' scope. This is no longer correct after commit 747c14307214 ("ip: fix dflt addr selection for connected nexthop"). Fix that by instead checking the address family of the gateway IP. This is a more direct way and also consistent with the IPv6 counterpart in mlxsw_sp_rt6_is_gateway(). Cc: stable@vger.kernel.org Fixes: 747c14307214 ("ip: fix dflt addr selection for connected nexthop") Fixes: 597cfe4fc339 ("nexthop: Add support for IPv4 nexthops") Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Amit Cohen <amcohen@nvidia.com> Reviewed-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Reviewed-by: David Ahern <dsahern@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-20net: marvell: prestera: add phylink supportOleksandr Mazur5-62/+334
For SFP port prestera driver will use kernel phylink infrastucture to configure port mode based on the module that has beed inserted Co-developed-by: Yevhen Orlov <yevhen.orlov@plvision.eu> Signed-off-by: Yevhen Orlov <yevhen.orlov@plvision.eu> Co-developed-by: Taras Chornyi <taras.chornyi@plvision.eu> Signed-off-by: Taras Chornyi <taras.chornyi@plvision.eu> Signed-off-by: Oleksandr Mazur <oleksandr.mazur@plvision.eu> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-20vmxnet3: Implement ethtool's get_channels commandAndrey Turkin1-0/+29
Some tools (e.g. libxdp) use that information. Signed-off-by: Andrey Turkin <andrey.turkin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-20Merge tag 'linux-can-next-for-5.20-20220720' of ↵David S. Miller32-145/+225
git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next Marc Kleine-Budde says: ==================== this is a pull request of 29 patches for net-next/master. The first 6 patches target the slcan driver. Dan Carpenter contributes a hardening patch, followed by 5 cleanup patches. Biju Das contributes 5 patches to prepare the sja1000 driver to support the Renesas RZ/N1 SJA1000 CAN controller. Dario Binacchi's patch for the slcan driver fixes a sleep with held spin lock. Another patch by Dario Binacchi fixes a wrong comment in the c_can driver. Pavel Pisa updates the CTU CAN FD IP core registers. Stephane Grosjean contributes 3 patches to the peak_usb driver for cleanups and support of a new MCU. The last 12 patches are by Vincent Mailhol, they fix and improve the txerr and rxerr reporting in all CAN drivers. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-20tcp: Fix data-races around sysctl knobs related to SYN option.Kuniyuki Iwashima1-3/+3
While reading these knobs, they can be changed concurrently. Thus, we need to add READ_ONCE() to their readers. - tcp_sack - tcp_window_scaling - tcp_timestamps Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-20ipv4: Fix data-races around sysctl_fib_multipath_hash_fields.Kuniyuki Iwashima1-1/+1
While reading sysctl_fib_multipath_hash_fields, it can be changed concurrently. Thus, we need to add READ_ONCE() to its readers. Fixes: ce5c9c20d364 ("ipv4: Add a sysctl to control multipath hash fields") Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-20ipv4: Fix data-races around sysctl_fib_multipath_hash_policy.Kuniyuki Iwashima1-1/+1
While reading sysctl_fib_multipath_hash_policy, it can be changed concurrently. Thus, we need to add READ_ONCE() to its readers. Fixes: bf4e0a3db97e ("net: ipv4: add support for ECMP hash policy choice") Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-20can: rcar_canfd: Add missing of_node_put() in rcar_canfd_probe()Liang He1-0/+1
We should use of_node_put() for the reference returned by of_get_child_by_name() which has increased the refcount. Fixes: 45721c406dcf ("can: rcar_canfd: Add support for r8a779a0 SoC") Link: https://lore.kernel.org/all/20220712095623.364287-1-windhl@126.com Signed-off-by: Liang He <windhl@126.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2022-07-20can: mcp251xfd: fix detection of mcp251863Marc Kleine-Budde1-5/+13
In commit c6f2a617a0a8 ("can: mcp251xfd: add support for mcp251863") support for the mcp251863 was added. However it was not taken into account that the auto detection of the chip model cannot distinguish between mcp2518fd and mcp251863 and would lead to a warning message if the firmware specifies a mcp251863. Fix auto detection: If a mcp2518fd compatible chip is found, keep the mcp251863 if specified by firmware, use mcp2518fd instead. Link: https://lore.kernel.org/all/20220706064835.1848864-1-mkl@pengutronix.de Fixes: c6f2a617a0a8 ("can: mcp251xfd: add support for mcp251863") Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2022-07-20can: add CAN_ERR_CNT flag to notify availability of error counterVincent Mailhol24-18/+36
Add a dedicated flag in uapi/linux/can/error.h to notify the userland that fields data[6] and data[7] of the CAN error frame were respectively populated with the tx and rx error counters. For all driver tree-wide, set up this flags whenever needed. Link: https://lore.kernel.org/all/20220719143550.3681-12-mailhol.vincent@wanadoo.fr Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2022-07-20can: usb_8dev: do not report txerr and rxerr during bus-offVincent Mailhol1-3/+4
During bus off, the error count is greater than 255 and can not fit in a u8. Fixes: 0024d8ad1639 ("can: usb_8dev: Add support for USB2CAN interface from 8 devices") Link: https://lore.kernel.org/all/20220719143550.3681-10-mailhol.vincent@wanadoo.fr Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2022-07-20can: kvaser_usb_leaf: do not report txerr and rxerr during bus-offVincent Mailhol1-2/+4
During bus off, the error count is greater than 255 and can not fit in a u8. Fixes: 7259124eac7d1 ("can: kvaser_usb: Split driver into kvaser_usb_core.c and kvaser_usb_leaf.c") Link: https://lore.kernel.org/all/20220719143550.3681-9-mailhol.vincent@wanadoo.fr CC: Jimmy Assarsson <extja@kvaser.com> Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2022-07-20can: kvaser_usb_hydra: do not report txerr and rxerr during bus-offVincent Mailhol1-4/+8
During bus off, the error count is greater than 255 and can not fit in a u8. Fixes: aec5fb2268b7 ("can: kvaser_usb: Add support for Kvaser USB hydra family") Link: https://lore.kernel.org/all/20220719143550.3681-8-mailhol.vincent@wanadoo.fr CC: Jimmy Assarsson <extja@kvaser.com> Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2022-07-20can: sun4i_can: do not report txerr and rxerr during bus-offVincent Mailhol1-5/+4
During bus off, the error count is greater than 255 and can not fit in a u8. Fixes: 0738eff14d81 ("can: Allwinner A10/A20 CAN Controller support - Kernel module") Link: https://lore.kernel.org/all/20220719143550.3681-7-mailhol.vincent@wanadoo.fr CC: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2022-07-20can: hi311x: do not report txerr and rxerr during bus-offVincent Mailhol1-2/+3
During bus off, the error count is greater than 255 and can not fit in a u8. Fixes: 57e83fb9b746 ("can: hi311x: Add Holt HI-311x CAN driver") Link: https://lore.kernel.org/all/20220719143550.3681-6-mailhol.vincent@wanadoo.fr Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
generated by cgit v1.2.3 (git 2.39.0) at 2024-07-07 15:26:56 +0300