Age | Commit message (Collapse) | Author | Files | Lines |
|
git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy
Pull phy fixes from Vinod Koul:
- init count imbalance fix in qcom-qmp-pcie and combo drivers
- kernel doc header fix for qcom-snps driver
- mediatek floating point comparison fix
- amlogic fix register value
* tag 'phy-fixes-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy:
phy: qcom-snps: correct struct qcom_snps_hsphy kerneldoc
phy: amlogic: phy-meson-g12a-mipi-dphy-analog: fix CNTL2_DIF_TX_CTL0 value
phy: mediatek: rework the floating point comparisons to fixed point
phy: qcom-qmp-pcie-msm8996: fix init-count imbalance
phy: qcom-qmp-combo: fix init-count imbalance
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine
Pull dmaengine fixes from Vinod Koul:
"Driver fixes for the at-hdmac, pl330, TI and IDXD drivers:
- AT HDMAC driver fixes for Flow Controller bitfield, peripheral ID
handling and potential NULL dereference check
- PL330 function rename to avoid conflicts
- build warning fix for pm function in TI driver
- IDXD driver fix for passing freed memory"
* tag 'dmaengine-fix-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine:
dmaengine: at_hdmac: Extend the Flow Controller bitfield to three bits
dmaengine: at_hdmac: Repair bitfield macros for peripheral ID handling
dmaengine: pl330: rename _start to prevent build error
dmaengine: at_xdmac: fix potential Oops in at_xdmac_prep_interleaved()
dmaengine: ti: k3-udma: annotate pm function with __maybe_unused
dmaengine: idxd: Fix passing freed memory in idxd_cdev_open()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq fixes from Thomas Gleixner:
"A set of fixes for interrupt chip drivers:
- Prevent loss of state in the MIPS GIC interrupt controller
- Disable pseudo NMIs on Mediatek based Chromebooks as they have
firmware issues which cause instantenous chrashes and freezes wen
pseudo NMIs are used
- Fix the error handling path in the MBIGEN driver and a defined but
not used warning in the meson-gpio interrupt chip driver"
* tag 'irq-urgent-2023-05-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irqchip/mbigen: Unify the error handling in mbigen_of_create_domain()
irqchip/meson-gpio: Mark OF related data as maybe unused
irqchip/mips-gic: Use raw spinlock for gic_lock
irqchip/mips-gic: Don't touch vl_map if a local interrupt is not routable
irqchip/gic-v3: Disable pseudo NMIs on Mediatek devices w/ firmware issues
dt-bindings: interrupt-controller: arm,gic-v3: Add quirk for Mediatek SoCs w/ broken FW
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull xen fixes from Juergen Gross:
- a double free fix in the Xen pvcalls backend driver
- a fix for a regression causing the MSI related sysfs entries to not
being created in Xen PV guests
- a fix in the Xen blkfront driver for handling insane input data
better
* tag 'for-linus-6.4-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
x86/pci/xen: populate MSI sysfs entries
xen/pvcalls-back: fix double frees with pvcalls_new_active_socket()
xen/blkfront: Only check REQ_FUA for writes
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc fixes from Greg KH:
"Here are some small driver fixes for 6.4-rc4. They are just two
different types:
- binder fixes and reverts for reported problems and regressions in
the binder "driver".
- coresight driver fixes for reported problems.
All of these have been in linux-next for over a week with no reported
problems"
* tag 'char-misc-6.4-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
binder: fix UAF of alloc->vma in race with munmap()
binder: add lockless binder_alloc_(set|get)_vma()
Revert "android: binder: stop saving a pointer to the VMA"
Revert "binder_alloc: add missing mmap_lock calls when using the VMA"
binder: fix UAF caused by faulty buffer cleanup
coresight: perf: Release Coresight path when alloc trace id failed
coresight: Fix signedness bug in tmc_etr_buf_insert_barrier_packet()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl
Pull compute express link fixes from Dan Williams:
"The 'media ready' series prevents the driver from acting on bad
capacity information, and it moves some checks earlier in the init
sequence which impacts topics in the queue for 6.5.
Additional hotplug testing uncovered a missing enable for memory
decode. A debug crash fix is also included.
Summary:
- Stop trusting capacity data before the "media ready" indication
- Add missing HDM decoder capability enable for the cold-plug case
- Fix a debug message induced crash"
* tag 'cxl-fixes-6.4-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl:
cxl: Explicitly initialize resources when media is not ready
cxl/port: Fix NULL pointer access in devm_cxl_add_port()
cxl: Move cxl_await_media_ready() to before capacity info retrieval
cxl: Wait Memory_Info_Valid before access memory related info
cxl/port: Enable the HDM decoder capability for switch ports
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC fixes from Arnd Bergmann:
"There have not been a lot of fixes for for the soc tree in 6.4, but
these have been sitting here for too long.
For the devicetree side, there is one minor warning fix for vexpress,
the rest all all for the the NXP i.MX platforms: SoC specific bugfixes
for the iMX8 clocks and its USB-3.0 gadget device, as well as board
specific fixes for regulators and the phy on some of the i.MX boards.
The microchip risc-v and arm32 maintainers now also add a shared
maintainer file entry for the arm64 parts.
The remaining fixes are all for firmware drivers, addressing mistakes
in the optee, scmi and ff-a firmware driver implementation, mostly in
the error handling code, incorrect use of the alloc_workqueue()
interface in SCMI, and compatibility with corner cases of the firmware
implementation"
* tag 'arm-fixes-6.4-1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
MAINTAINERS: update arm64 Microchip entries
arm64: dts: imx8: fix USB 3.0 Gadget Failure in QM & QXPB0 at super speed
dt-binding: cdns,usb3: Fix cdns,on-chip-buff-size type
arm64: dts: colibri-imx8x: delete adc1 and dsp
arm64: dts: colibri-imx8x: fix iris pinctrl configuration
arm64: dts: colibri-imx8x: move pinctrl property from SoM to eval board
arm64: dts: colibri-imx8x: fix eval board pin configuration
arm64: dts: imx8mp: Fix video clock parents
ARM: dts: imx6qdl-mba6: Add missing pvcie-supply regulator
ARM: dts: imx6ull-dhcor: Set and limit the mode for PMIC buck 1, 2 and 3
arm64: dts: imx8mn-var-som: fix PHY detection bug by adding deassert delay
arm64: dts: imx8mn: Fix video clock parents
firmware: arm_ffa: Set reserved/MBZ fields to zero in the memory descriptors
firmware: arm_ffa: Fix FFA device names for logical partitions
firmware: arm_ffa: Fix usage of partition info get count flag
firmware: arm_ffa: Check if ffa_driver remove is present before executing
arm64: dts: arm: add missing cache properties
ARM: dts: vexpress: add missing cache properties
firmware: arm_scmi: Fix incorrect alloc_workqueue() invocation
optee: fix uninited async notif value
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci
Pull PCI fix from Bjorn Helgaas:
- Quirk Ice Lake Root Ports to work around DPC log size issue (Mika
Westerberg)
* tag 'pci-v6.4-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci:
PCI/DPC: Quirk PIO log size for Intel Ice Lake Root Ports
|
|
Pull VFIO fix from Alex Williamson:
- Test for and return error for invalid pfns through the pin pages
interface (Yan Zhao)
* tag 'vfio-v6.4-rc4' of https://github.com/awilliam/linux-vfio:
vfio/type1: check pfn valid before converting to struct page
|
|
Pull block fixes from Jens Axboe:
"A few fixes for the storage side of things:
- Fix bio caching condition for passthrough IO (Anuj)
- end-of-device check fix for zero sized devices (Christoph)
- Update Paolo's email address
- NVMe pull request via Keith with a single quirk addition
- Fix regression in how wbt enablement is done (Yu)
- Fix race in active queue accounting (Tian)"
* tag 'block-6.4-2023-05-26' of git://git.kernel.dk/linux:
NVMe: Add MAXIO 1602 to bogus nid list.
block: make bio_check_eod work for zero sized devices
block: fix bio-cache for passthru IO
block, bfq: update Paolo's address in maintainer list
blk-mq: fix race condition in active queue accounting
blk-wbt: fix that wbt can't be disabled by default
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull thermal control fix from Rafael Wysocki:
"Fix a regression introduced inadvertently during the 6.3 cycle by a
commit making the Intel int340x thermal driver use sysfs_emit_at()
instead of scnprintf() (Srinivas Pandruvada)"
* tag 'thermal-6.4-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
thermal: intel: int340x: Add new line for UUID display
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fixes from Rafael Wysocki:
"Fix three issues related to the ->fast_switch callback in the AMD
P-state cpufreq driver (Gautham R. Shenoy and Wyes Karny)"
* tag 'pm-6.4-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
cpufreq: amd-pstate: Update policy->cur in amd_pstate_adjust_perf()
cpufreq: amd-pstate: Remove fast_switch_possible flag from active driver
cpufreq: amd-pstate: Add ->fast_switch() callback
|
|
When media is not ready do not assume that the capacity information from
the identify command is valid, i.e. ->total_bytes
->partition_align_bytes ->{volatile,persistent}_only_bytes. Explicitly
zero out the capacity resources and exit early.
Given zero-init of those fields this patch is functionally equivalent to
the prior state, but it improves readability and robustness going
forward.
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/168506118166.3004974.13523455340007852589.stgit@djiang5-mobl3
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio fixes from Bartosz Golaszewski:
- fix incorrect output in in-tree gpio tools
- fix a shell coding issue in gpio-sim selftests
- correctly set the permissions for debugfs attributes exposed by
gpio-mockup
- fix chip name and pin count in gpio-f7188x for one of the supported
models
- fix numberspace pollution when using dynamically and statically
allocated GPIOs together
* tag 'gpio-fixes-for-v6.4-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
gpio-f7188x: fix chip name and pin count on Nuvoton chip
gpiolib: fix allocation of mixed dynamic/static GPIOs
gpio: mockup: Fix mode of debugfs files
selftests: gpio: gpio-sim: Fix BUG: test FAILED due to recent change
tools: gpio: fix debounce_period_us output of lsgpio
|
|
Pull drm fixes from Dave Airlie:
"This week's collection is pretty spread out, accel/qaic has a bunch of
fixes, amdgpu, then lots of single fixes across a bunch of places.
core:
- fix drmm_mutex_init lock class
mgag200:
- fix gamma lut initialisation
pl111:
- fix FB depth on IMPD-1 framebuffer
amdgpu:
- Fix missing BO unlocking in KIQ error path
- Avoid spurious secure display error messages
- SMU13 fix
- Fix an OD regression
- GPU reset display IRQ warning fix
- MST fix
radeon:
- Fix a DP regression
i915:
- PIPEDMC disabling fix for bigjoiner config
panel:
- fix aya neo air plus quirk
sched:
- remove redundant NULL check
qaic:
- fix NNC message corruption
- Grab ch_lock during QAIC_ATTACH_SLICE_BO
- Flush the transfer list again
- Validate if BO is sliced before slicing
- Validate user data before grabbing any lock
- initialize ret variable to 0
- silence some uninitialized variable warnings"
* tag 'drm-fixes-2023-05-26' of git://anongit.freedesktop.org/drm/drm:
drm/amd/display: Have Payload Properly Created After Resume
drm/amd/display: Fix warning in disabling vblank irq
drm/amd/pm: Fix output of pp_od_clk_voltage
drm/amd/pm: add missing NotifyPowerSource message mapping for SMU13.0.7
drm/radeon: reintroduce radeon_dp_work_func content
drm/amdgpu: don't enable secure display on incompatible platforms
drm:amd:amdgpu: Fix missing buffer object unlock in failure path
accel/qaic: Fix NNC message corruption
accel/qaic: Grab ch_lock during QAIC_ATTACH_SLICE_BO
accel/qaic: Flush the transfer list again
accel/qaic: Validate if BO is sliced before slicing
accel/qaic: Validate user data before grabbing any lock
accel/qaic: initialize ret variable to 0
drm/i915: Fix PIPEDMC disabling for a bigjoiner configuration
drm: fix drmm_mutex_init()
drm/sched: Remove redundant check
drm: panel-orientation-quirks: Change Air's quirk to support Air Plus
accel/qaic: silence some uninitialized variable warnings
drm/pl111: Fix FB depth on IMPD-1 framebuffer
drm/mgag200: Fix gamma lut not initialized.
|
|
HIKSEMI FUTURE M.2 SSD uses the same dummy nguid and eui64.
I confirmed it with my two devices.
This patch marks the controller as NVME_QUIRK_BOGUS_NID.
---------------------------------------------------------
sugi@tempest:~% sudo nvme id-ctrl /dev/nvme0
NVME Identify Controller:
vid : 0x1e4b
ssvid : 0x1e4b
sn : 30096022612
mn : HS-SSD-FUTURE 2048G
fr : SN10542
rab : 0
ieee : 000000
cmic : 0
mdts : 7
cntlid : 0
ver : 0x10400
rtd3r : 0x7a120
rtd3e : 0x1e8480
oaes : 0x200
ctratt : 0x2
rrls : 0
cntrltype : 1
fguid : 00000000-0000-0000-0000-000000000000
<snip...>
---------------------------------------------------------
---------------------------------------------------------
sugi@tempest:~% sudo nvme id-ns /dev/nvme0n1
NVME Identify Namespace 1:
<snip...>
nguid : 00000000000000000000000000000000
eui64 : 0000000000000002
lbaf 0 : ms:0 lbads:9 rp:0 (in use)
---------------------------------------------------------
Signed-off-by: Tatsuki Sugiura <sugi@nemui.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into arm/fixes
Arm FF-A fixes for v6.4
Quite a few fixes to address set of assorted issues:
1. NULL pointer dereference if the ffa driver doesn't provide remove()
callback as it is currently executed unconditionally
2. FF-A core probe failure on systems with v1.0 firmware as the new
partition info get count flag is used unconditionally
3. Failure to register more than one logical partition or service within
the same physical partition as the device name contains only VM ID
which will be same for all but each will have unique UUID.
4. Rejection of certain memory interface transmissions by the receivers
(secure partitions) as few MBZ fields are non-zero due to lack of
explicit re-initialization of those fields
* tag 'ffa-fixes-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux:
firmware: arm_ffa: Set reserved/MBZ fields to zero in the memory descriptors
firmware: arm_ffa: Fix FFA device names for logical partitions
firmware: arm_ffa: Fix usage of partition info get count flag
firmware: arm_ffa: Check if ffa_driver remove is present before executing
Link: https://lore.kernel.org/r/20230509143453.1188753-1-sudeep.holla@arm.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://anongit.freedesktop.org/drm/drm-misc into drm-fixes
drm-misc-fixes for v6.4-rc4:
- A few non-trivial fixes to qaic.
- Fix drmm_mutex_init always using same lock class.
- Fix pl111 fb depth.
- Fix uninitialised gamma lut in mgag200.
- Add Aya Neo Air Plus quirk.
- Trivial null check removal in scheduler.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/d19f748c-2c5b-8140-5b05-a8282dfef73e@linux.intel.com
|
|
https://gitlab.freedesktop.org/agd5f/linux into drm-fixes
amd-drm-fixes-6.4-2023-05-24:
amdgpu:
- Fix missing BO unlocking in KIQ error path
- Avoid spurious secure display error messages
- SMU13 fix
- Fix an OD regression
- GPU reset display IRQ warning fix
- MST fix
radeon:
- Fix a DP regression
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230524211238.7749-1-alexander.deucher@amd.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux
Pull parisc architecture fixes from Helge Deller:
"Quite a bunch of real bugfixes in here and most of them are tagged for
backporting: A fix for cache flushing from irq context, a kprobes &
kgdb breakpoint handling fix, and a fix in the alternative code
patching function to take care of CPU hotplugging.
parisc now provides LOCKDEP support and comes with a lightweight
spinlock check. Both features helped me to find the cache flush bug.
Additionally writing the AGP gatt has been fixed, the machine allows
the user to reboot after a system halt and arch_sync_dma_for_cpu() has
been optimized for PCXL PCUs.
Summary:
- Fix flush_dcache_page() for usage from irq context
- Handle kprobes breakpoints only in kernel context
- Handle kgdb breakpoints only in kernel context
- Use num_present_cpus() in alternative patching code
- Enable LOCKDEP support
- Add lightweight spinlock checks
- Flush AGP gatt writes and adjust gatt mask in parisc_agp_mask_memory()
- Allow to reboot machine after system halt
- Improve cache flushing for PCXL in arch_sync_dma_for_cpu()"
* tag 'parisc-for-6.4-3' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
parisc: Fix flush_dcache_page() for usage from irq context
parisc: Handle kgdb breakpoints only in kernel context
parisc: Handle kprobes breakpoints only in kernel context
parisc: Allow to reboot machine after system halt
parisc: Enable LOCKDEP support
parisc: Add lightweight spinlock checks
parisc: Use num_present_cpus() in alternative patching code
parisc: Flush gatt writes and adjust gatt mask in parisc_agp_mask_memory()
parisc: Improve cache flushing for PCXL in arch_sync_dma_for_cpu()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from bluetooth and bpf.
Current release - regressions:
- net: fix skb leak in __skb_tstamp_tx()
- eth: mtk_eth_soc: fix QoS on DSA MAC on non MTK_NETSYS_V2 SoCs
Current release - new code bugs:
- handshake:
- fix sock->file allocation
- fix handshake_dup() ref counting
- bluetooth:
- fix potential double free caused by hci_conn_unlink
- fix UAF in hci_conn_hash_flush
Previous releases - regressions:
- core: fix stack overflow when LRO is disabled for virtual
interfaces
- tls: fix strparser rx issues
- bpf:
- fix many sockmap/TCP related issues
- fix a memory leak in the LRU and LRU_PERCPU hash maps
- init the offload table earlier
- eth: mlx5e:
- do as little as possible in napi poll when budget is 0
- fix using eswitch mapping in nic mode
- fix deadlock in tc route query code
Previous releases - always broken:
- udplite: fix NULL pointer dereference in __sk_mem_raise_allocated()
- raw: fix output xfrm lookup wrt protocol
- smc: reset connection when trying to use SMCRv2 fails
- phy: mscc: enable VSC8501/2 RGMII RX clock
- eth: octeontx2-pf: fix TSOv6 offload
- eth: cdc_ncm: deal with too low values of dwNtbOutMaxSize"
* tag 'net-6.4-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (79 commits)
udplite: Fix NULL pointer dereference in __sk_mem_raise_allocated().
net: phy: mscc: enable VSC8501/2 RGMII RX clock
net: phy: mscc: remove unnecessary phydev locking
net: phy: mscc: add support for VSC8501
net: phy: mscc: add VSC8502 to MODULE_DEVICE_TABLE
net/handshake: Enable the SNI extension to work properly
net/handshake: Unpin sock->file if a handshake is cancelled
net/handshake: handshake_genl_notify() shouldn't ignore @flags
net/handshake: Fix uninitialized local variable
net/handshake: Fix handshake_dup() ref counting
net/handshake: Remove unneeded check from handshake_dup()
ipv6: Fix out-of-bounds access in ipv6_find_tlv()
net: ethernet: mtk_eth_soc: fix QoS on DSA MAC on non MTK_NETSYS_V2 SoCs
docs: netdev: document the existence of the mail bot
net: fix skb leak in __skb_tstamp_tx()
r8169: Use a raw_spinlock_t for the register locks.
page_pool: fix inconsistency for page_pool_ring_[un]lock()
bpf, sockmap: Test progs verifier error with latest clang
bpf, sockmap: Test FIONREAD returns correct bytes in rx buffer with drops
bpf, sockmap: Test FIONREAD returns correct bytes in rx buffer
...
|
|
Driver should update policy->cur after updating the frequency.
Currently amd_pstate doesn't update policy->cur when `adjust_perf`
is used. Which causes /proc/cpuinfo to show wrong cpu frequency.
Fix this by updating policy->cur with correct frequency value in
adjust_perf function callback.
- Before the fix: (setting min freq to 1.5 MHz)
[root@amd]# cat /proc/cpuinfo | grep "cpu MHz" | sort | uniq --count
1 cpu MHz : 1777.016
1 cpu MHz : 1797.160
1 cpu MHz : 1797.270
189 cpu MHz : 400.000
- After the fix: (setting min freq to 1.5 MHz)
[root@amd]# cat /proc/cpuinfo | grep "cpu MHz" | sort | uniq --count
1 cpu MHz : 1753.353
1 cpu MHz : 1756.838
1 cpu MHz : 1776.466
1 cpu MHz : 1776.873
1 cpu MHz : 1777.308
1 cpu MHz : 1779.900
183 cpu MHz : 1805.231
1 cpu MHz : 1956.815
1 cpu MHz : 2246.203
1 cpu MHz : 2259.984
Fixes: 1d215f0319c2 ("cpufreq: amd-pstate: Add fast switch function for AMD P-State")
Signed-off-by: Wyes Karny <wyes.karny@amd.com>
[ rjw: Subject edits ]
Cc: 5.17+ <stable@vger.kernel.org> # 5.17+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply
Pull power supply fixes from Sebastian Reichel:
- Fix power_supply_get_battery_info for devices without parent devices
resulting in NULL pointer dereference
- Fix desktop systems reporting to run on battery once a power-supply
device with device scope appears (e.g. a HID keyboard with a battery)
- Ratelimit debug print about driver not providing data
- Fix race condition related to external_power_changed in multiple
drivers (ab8500, axp288, bq25890, sc27xx, bq27xxx)
- Fix LED trigger switching from blinking to solid-on when charging
finishes
- Fix multiple races in bq27xxx battery driver
- mt6360: handle potential ENOMEM from devm_work_autocancel
- sbs-charger: Fix SBS_CHARGER_STATUS_CHARGE_INHIBITED bit
- rt9467: avoid passing 0 to dev_err_probe
* tag 'for-v6.4-rc' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply: (21 commits)
power: supply: Fix logic checking if system is running from battery
power: supply: mt6360: add a check of devm_work_autocancel in mt6360_charger_probe
power: supply: sbs-charger: Fix INHIBITED bit for Status reg
power: supply: rt9467: Fix passing zero to 'dev_err_probe'
power: supply: Ratelimit no data debug output
power: supply: Fix power_supply_get_battery_info() if parent is NULL
power: supply: bq24190: Call power_supply_changed() after updating input current
power: supply: bq25890: Call power_supply_changed() after updating input current or voltage
power: supply: bq27xxx: Use mod_delayed_work() instead of cancel() + schedule()
power: supply: bq27xxx: After charger plug in/out wait 0.5s for things to stabilize
power: supply: bq27xxx: Ensure power_supply_changed() is called on current sign changes
power: supply: bq27xxx: Move bq27xxx_battery_update() down
power: supply: bq27xxx: Add cache parameter to bq27xxx_battery_current_and_status()
power: supply: bq27xxx: Fix poll_interval handling and races on remove
power: supply: bq27xxx: Fix I2C IRQ race on remove
power: supply: bq27xxx: Fix bq27xxx_battery_update() race condition
power: supply: leds: Fix blink to LED on transition
power: supply: sc27xx: Fix external_power_changed race
power: supply: bq25890: Fix external_power_changed race
power: supply: axp288_fuel_gauge: Fix external_power_changed race
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver fixes from Hans de Goede:
"Nothing special to report just a few small fixes"
* tag 'platform-drivers-x86-v6.4-3' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
platform/x86/intel/ifs: Annotate work queue on stack so object debug does not complain
platform/x86: ISST: Remove 8 socket limit
platform/mellanox: mlxbf-pmc: fix sscanf() error checking
platform/x86/amd/pmf: Fix CnQF and auto-mode after resume
platform/x86: asus-wmi: Ignore WMI events with codes 0x7B, 0xC0
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into arm/fixes
Arm SCMI fix for v6.4
Single fix for incorrect invocation of alloc_workqueue() where WQ_SYSFS
flag is passed as @max_active parameter instead of OR'ing with the other
flags in the @flags parameter.
* tag 'scmi-fix-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux:
firmware: arm_scmi: Fix incorrect alloc_workqueue() invocation
Link: https://lore.kernel.org/r/20230509143529.1188812-1-sudeep.holla@arm.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.linaro.org/people/jens.wiklander/linux-tee into arm/fixes
Fixes an uninitialized variable in OP-TEE driver
* tag 'optee-async-notif-fix-for-v6.3' of https://git.linaro.org/people/jens.wiklander/linux-tee:
optee: fix uninited async notif value
Link: https://lore.kernel.org/r/20230421075443.GA3136581@rayden
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
By default the VSC8501 and VSC8502 RGMII/GMII/MII RX_CLK output is
disabled. To allow packet forwarding towards the MAC it needs to be
enabled.
For other PHYs supported by this driver the clock output is enabled
by default.
Fixes: d3169863310d ("net: phy: mscc: add support for VSC8502")
Signed-off-by: David Epping <david.epping@missinglinkelectronics.com>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Holding the struct phy_device (phydev) lock is unnecessary when
accessing phydev->interface in the PHY driver .config_init method,
which is the only place that vsc85xx_rgmii_set_skews() is called from.
The phy_modify_paged() function implements required MDIO bus level
locking, which can not be achieved by a phydev lock.
Signed-off-by: David Epping <david.epping@missinglinkelectronics.com>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The VSC8501 PHY can use the same driver implementation as the VSC8502.
Adding the PHY ID and copying the handler functions of VSC8502 is
sufficient to operate it.
Signed-off-by: David Epping <david.epping@missinglinkelectronics.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The mscc driver implements support for VSC8502, so its ID should be in
the MODULE_DEVICE_TABLE for automatic loading.
Signed-off-by: David Epping <david.epping@missinglinkelectronics.com>
Fixes: d3169863310d ("net: phy: mscc: add support for VSC8502")
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
At drm suspend sequence, MST dc_sink is removed. When commit cached
MST stream back in drm resume sequence, the MST stream payload is not
properly created and added into the payload table. After resume, topology
change is reprobed by removing existing streams first. That leads to
no payload is found in the existing payload table as below error
"[drm] ERROR No payload for [MST PORT:] found in mst state"
1. In encoder .atomic_check routine, remove check existance of dc_sink
2. Bypass MST by checking existence of MST root port. dc_link_type cannot
differentiate MST port before topology is rediscovered.
Reviewed-by: Wayne Lin <wayne.lin@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Fangzhi Zuo <jerry.zuo@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
|
|
[Why]
During gpu-reset, we toggle vblank irq by calling dc_interrupt_set()
instead of amdgpu_irq_get/put() because we don't want to change the irq
source's refcount. However, we see the warning when vblank irq is enabled
by dc_interrupt_set() during gpu-reset but disabled by amdgpu_irq_put()
after gpu-reset.
[How]
Only in dm_gpureset_toggle_interrupts() we toggle vblank interrupts by
calling dc_interrupt_set(). Apart from this we call dm_set_vblank()
which uses amdgpu_irq_get/put() to operate vblank irq.
Reviewed-by: Bhawanpreet Lakha <bhawanpreet.lakha@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Alan Liu <haoping.liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Printing the other clock types should not be conditioned on being able
to print OD_SCLK. Some GPUs currently have limited capability of only
printing a subset of these.
Since this condition was introduced in v5.18-rc1, reading from
`pp_od_clk_voltage` has been returning empty on the Asus ROG Strix G15
(2021).
Fixes: 79c65f3fcbb1 ("drm/amd/pm: do not expose power implementation details to amdgpu_pm.c")
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Jonatas Esteves <jntesteves@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
|
|
Otherwise, the power source switching will fail due to message
unavailable.
Fixes: bf4823267a81 ("drm/amd/pm: fix possible power mode mismatch between driver and PMFW")
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Guchun Chen <guchun.chen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
|
|
Put back the radeon_dp_work_func logic. It seems that
handling DP RX interrupts is necessary to make some
panels work. This was removed with the MST support,
but it regresses some systems so add it back. While
we are here, add the proper mutex locking.
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2567
Fixes: 01ad1d9c2888 ("drm/radeon: Drop legacy MST support")
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: Lyude Paul <lyude@redhat.com>
Cc: stable@vger.kernel.org
|
|
[why]
[drm] psp gfx command LOAD_TA(0x1) failed and response status is (0x7)
[drm] psp gfx command INVOKE_CMD(0x3) failed and response status is (0x4)
amdgpu 0000:04:00.0: amdgpu: Secure display: Generic Failure.
[how]
don't enable secure display on incompatible platforms
Suggested-by: Aaron Liu <aaron.liu@amd.com>
Signed-off-by: Jesse zhang <jesse.zhang@amd.com>
Reviewed-by: Aaron Liu <aaron.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
|
|
smatch warning -
1) drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c:3615 gfx_v9_0_kiq_resume()
warn: inconsistent returns 'ring->mqd_obj->tbo.base.resv'.
2) drivers/gpu/drm/amd/amdgpu/gfx_v10_0.c:6901 gfx_v10_0_kiq_resume()
warn: inconsistent returns 'ring->mqd_obj->tbo.base.resv'.
Signed-off-by: Sukrut Bellary <sukrut.bellary@linux.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi fixes from Mark Brown:
"A collection of fixes that came in since the merge window, plus an
update to MAINTAINERS.
The Cadence fixes are coming from the addition of device mode support,
they required a couple of incremental updates in order to get
something that works robustly for both device and controller modes"
* tag 'spi-fix-v6.4-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: spi-cadence: Interleave write of TX and read of RX FIFO
spi: dw: Replace spi->chip_select references with function calls
spi: MAINTAINERS: drop Krzysztof Kozlowski from Samsung SPI
spi: spi-cadence: Only overlap FIFO transactions in slave mode
spi: spi-cadence: Avoid read of RX FIFO before its ready
spi: spi-geni-qcom: Select FIFO mode for chip select
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator
Pull regulator fixes from Mark Brown:
"Some fixes that came in since the merge window, nothing terribly
exciting - a couple of driver specific fixes and a fix for the error
handling when setting up the debugfs for the devices"
* tag 'regulator-fix-v6.4-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
regulator: mt6359: add read check for PMIC MT6359
regulator: Fix error checking for debugfs_create_dir
regulator: pca9450: Fix BUCK2 enable_mask
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc
Pull MMC fixes from Ulf Hansson:
"MMC core:
- Fix error propagation for the non-block-device I/O paths
MMC host:
- sdhci-cadence: Fix an error path during probe
- sdhci-esdhc-imx: Fix support for the 'no-mmc-hs400' DT property"
* tag 'mmc-v6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
mmc: sdhci-esdhc-imx: make "no-mmc-hs400" works
mmc: sdhci-cadence: Fix an error handling path in sdhci_cdns_probe()
mmc: block: ensure error propagation for non-blk
|
|
Prior to the commit "763bd29fd3d1 ("thermal: int340x_thermal: Use
sysfs_emit_at() instead of scnprintf()", there was a new line after each
UUID string.
With the newline removed, existing user space like "thermald" fails to
compare each supported UUID as it is using getline() to read UUID and
apply correct thermal table.
To avoid breaking existing user space, add newline after each UUID string.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Fixes: 763bd29fd3d1 ("thermal: int340x_thermal: Use sysfs_emit_at() instead of scnprintf()")
Cc: 6.3+ <stable@vger.kernel.org> # 6.3+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
amd_pstate active mode driver is only compatible with static governors.
Therefore it doesn't need fast_switch functionality. Remove
fast_switch_possible flag from amd_pstate active mode driver.
Fixes: ffa5096a7c33 ("cpufreq: amd-pstate: implement Pstate EPP support for the AMD processors")
Signed-off-by: Wyes Karny <wyes.karny@amd.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Schedutil normally calls the adjust_perf callback for drivers with
adjust_perf callback available and fast_switch_possible flag set.
However, when frequency invariance is disabled and schedutil tries to
invoke fast_switch. So, there is a chance of kernel crash if this
function pointer is not set. To protect against this scenario add
fast_switch callback to amd_pstate driver.
Fixes: 1d215f0319c2 ("cpufreq: amd-pstate: Add fast switch function for AMD P-State")
Signed-off-by: Gautham R. Shenoy <gautham.shenoy@amd.com>
Signed-off-by: Wyes Karny <wyes.karny@amd.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
In the pvcalls_new_active_socket() function, most error paths call
pvcalls_back_release_active(fedata->dev, fedata, map) which calls
sock_release() on "sock". The bug is that the caller also frees sock.
Fix this by making every error path in pvcalls_new_active_socket()
release the sock, and don't free it in the caller.
Fixes: 5db4d286a8ef ("xen/pvcalls: implement connect command")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Juergen Gross <jgross@suse.com>
Link: https://lore.kernel.org/r/e5f98dc2-0305-491f-a860-71bbd1398a2f@kili.mountain
Signed-off-by: Juergen Gross <jgross@suse.com>
|
|
The existing code silently converts read operations with the
REQ_FUA bit set into write-barrier operations. This results in data
loss as the backend scribbles zeroes over the data instead of returning
it.
While the REQ_FUA bit doesn't make sense on a read operation, at least
one well-known out-of-tree kernel module does set it and since it
results in data loss, let's be safe here and only look at REQ_FUA for
writes.
Signed-off-by: Ross Lagerwall <ross.lagerwall@citrix.com>
Acked-by: Juergen Gross <jgross@suse.com>
Link: https://lore.kernel.org/r/20230426164005.2213139-1-ross.lagerwall@citrix.com
Signed-off-by: Juergen Gross <jgross@suse.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux
Saeed Mahameed says:
====================
mlx5-fixes-2023-05-22
This series provides bug fixes for the mlx5 driver.
Please pull and let me know if there is any problem.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The commit c6d96df9fa2c ("net: ethernet: mtk_eth_soc: drop generic vlan rx
offload, only use DSA untagging") makes VLAN RX offloading to be only used
on the SoCs without the MTK_NETSYS_V2 ability (which are not just MT7621
and MT7622). The commit disables the proper handling of special tagged
(DSA) frames, added with commit 87e3df4961f4 ("net-next: ethernet:
mediatek: add CDM able to recognize the tag for DSA"), for non
MTK_NETSYS_V2 SoCs when it finds a MAC that does not use DSA. So if the
other MAC uses DSA, the CDMQ component transmits DSA tagged frames to the
CPU improperly. This issue can be observed on frames with TCP, for example,
a TCP speed test using iperf3 won't work.
The commit disables the proper handling of special tagged (DSA) frames
because it assumes that these SoCs don't use more than one MAC, which is
wrong. Although I made Frank address this false assumption on the patch log
when they sent the patch on behalf of Felix, the code still made changes
with this assumption.
Therefore, the proper handling of special tagged (DSA) frames must be kept
enabled in all circumstances as it doesn't affect non DSA tagged frames.
Hardware DSA untagging, introduced with the commit 2d7605a72906 ("net:
ethernet: mtk_eth_soc: enable hardware DSA untagging"), and VLAN RX
offloading are operations on the two CDM components of the frame engine,
CDMP and CDMQ, which connect to Packet DMA (PDMA) and QoS DMA (QDMA) and
are between the MACs and the CPU. These operations apply to all MACs of the
SoC so if one MAC uses DSA and the other doesn't, the hardware DSA
untagging operation will cause the CDMP component to transmit non DSA
tagged frames to the CPU improperly.
Since the VLAN RX offloading feature configuration was dropped, VLAN RX
offloading can only be used along with hardware DSA untagging. So, for the
case above, we need to disable both features and leave it to the CPU,
therefore software, to untag the DSA and VLAN tags.
So the correct way to handle this is:
For all SoCs:
Enable the proper handling of special tagged (DSA) frames
(MTK_CDMQ_IG_CTRL).
For non MTK_NETSYS_V2 SoCs:
Enable hardware DSA untagging (MTK_CDMP_IG_CTRL).
Enable VLAN RX offloading (MTK_CDMP_EG_CTRL).
When a non MTK_NETSYS_V2 SoC MAC does not use DSA:
Disable hardware DSA untagging (MTK_CDMP_IG_CTRL).
Disable VLAN RX offloading (MTK_CDMP_EG_CTRL).
Fixes: c6d96df9fa2c ("net: ethernet: mtk_eth_soc: drop generic vlan rx offload, only use DSA untagging")
Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Some chips have two bits (e.g SAMA5D3), and some have three (e.g.
SAM9G45). A field width of three is compatible as long as valid
values are used for the different chips.
There is no current use of any value needing three bits, so the
fixed bug is relatively benign.
Fixes: d8840a7edcf0 ("dmaengine: at_hdmac: Use bitfield access macros")
Cc: stable@vger.kernel.org
Reviewed-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Signed-off-by: Peter Rosin <peda@axentia.se>
Link: https://lore.kernel.org/r/e2c898ba-c3a3-5dd3-384b-0585661c79f2@axentia.se
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
The MSB part of the peripheral IDs need to go into the ATC_SRC_PER_MSB
and ATC_DST_PER_MSB fields. Not the LSB part.
This fixes a severe regression for TSE-850 devices (compatible
axentia,tse850v3) where output to the audio I2S codec (the main
purpose of the device) simply do not work.
Fixes: d8840a7edcf0 ("dmaengine: at_hdmac: Use bitfield access macros")
Cc: stable@vger.kernel.org
Signed-off-by: Peter Rosin <peda@axentia.se>
Reviewed-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Link: https://lore.kernel.org/r/01e5dae1-d4b0-cf31-516b-423b11b077f1@axentia.se
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
"_start" is used in several arches and proably should be reserved
for ARCH usage. Using it in a driver for a private symbol can cause
a build error when it conflicts with ARCH usage of the same symbol.
Therefore rename pl330's "_start" to "pl330_start_thread" so that there
is no conflict and no build error.
drivers/dma/pl330.c:1053:13: error: '_start' redeclared as different kind of symbol
1053 | static bool _start(struct pl330_thread *thrd)
| ^~~~~~
In file included from ../include/linux/interrupt.h:21,
from ../drivers/dma/pl330.c:18:
arch/riscv/include/asm/sections.h:11:13: note: previous declaration of '_start' with type 'char[]'
11 | extern char _start[];
| ^~~~~~
Fixes: b7d861d93945 ("DMA: PL330: Merge PL330 driver into drivers/dma/")
Fixes: ae43b3289186 ("ARM: 8202/1: dmaengine: pl330: Add runtime Power Management support v12")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Jaswinder Singh <jassisinghbrar@gmail.com>
Cc: Boojin Kim <boojin.kim@samsung.com>
Cc: Krzysztof Kozlowski <krzk@kernel.org>
Cc: Russell King <rmk+kernel@arm.linux.org.uk>
Cc: Vinod Koul <vkoul@kernel.org>
Cc: dmaengine@vger.kernel.org
Cc: linux-riscv@lists.infradead.org
Link: https://lore.kernel.org/r/20230524045310.27923-1-rdunlap@infradead.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|