Age | Commit message (Collapse) | Author | Files | Lines |
|
The helper is trivial, we can inline it. It's safe to remove the 'if' as
the iterator is always valid when used, the potential NULL was never
checked anyway.
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
The helper is trivial and used only once, open code it. It's safe to
remove the 'if', the pointer is validated in build_backref_tree().
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Do a cleanup in the rest of the headers:
- add forward declarations for types referenced by pointers
- add includes when types need them
This fixes potential compilation problems if the headers are reordered
or the missing includes are not provided indirectly.
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs updates from David Sterba:
"New features:
- raid-stripe-tree
New tree for logical file extent mapping where the physical mapping
may not match on multiple devices. This is now used in zoned mode
to implement RAID0/RAID1* profiles, but can be used in non-zoned
mode as well. The support for RAID56 is in development and will
eventually fix the problems with the current implementation. This
is a backward incompatible feature and has to be enabled at mkfs
time.
- simple quota accounting (squota)
A simplified mode of qgroup that accounts all space on the initial
extent owners (a subvolume), the snapshots are then cheap to create
and delete. The deletion of snapshots in fully accounting qgroups
is a known CPU/IO performance bottleneck.
The squota is not suitable for the general use case but works well
for containers where the original subvolume exists for the whole
time. This is a backward incompatible feature as it needs extending
some structures, but can be enabled on an existing filesystem.
- temporary filesystem fsid (temp_fsid)
The fsid identifies a filesystem and is hard coded in the
structures, which disallows mounting the same fsid found on
different devices.
For a single device filesystem this is not strictly necessary, a
new temporary fsid can be generated on mount e.g. after a device is
cloned. This will be used by Steam Deck for root partition A/B
testing, or can be used for VM root images.
Other user visible changes:
- filesystems with partially finished metadata_uuid conversion cannot
be mounted anymore and the uuid fixup has to be done by btrfs-progs
(btrfstune).
Performance improvements:
- reduce reservations for checksum deletions (with enabled free space
tree by factor of 4), on a sample workload on file with many
extents the deletion time decreased by 12%
- make extent state merges more efficient during insertions, reduce
rb-tree iterations (run time of critical functions reduced by 5%)
Core changes:
- the integrity check functionality has been removed, this was a
debugging feature and removal does not affect other integrity
checks like checksums or tree-checker
- space reservation changes:
- more efficient delayed ref reservations, this avoids building up
too much work or overusing or exhausting the global block
reserve in some situations
- move delayed refs reservation to the transaction start time,
this prevents some ENOSPC corner cases related to exhaustion of
global reserve
- improvements in reducing excessive reservations for block group
items
- adjust overcommit logic in near full situations, account for one
more chunk to eventually allocate metadata chunk, this is mostly
relevant for small filesystems (<10GiB)
- single device filesystems are scanned but not registered (except
seed devices), this allows temp_fsid to work
- qgroup iterations do not need GFP_ATOMIC allocations anymore
- cleanups, refactoring, reduced data structure size, function
parameter simplifications, error handling fixes"
* tag 'for-6.7-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: (156 commits)
btrfs: open code timespec64 in struct btrfs_inode
btrfs: remove redundant log root tree index assignment during log sync
btrfs: remove redundant initialization of variable dirty in btrfs_update_time()
btrfs: sysfs: show temp_fsid feature
btrfs: disable the device add feature for temp-fsid
btrfs: disable the seed feature for temp-fsid
btrfs: update comment for temp-fsid, fsid, and metadata_uuid
btrfs: remove pointless empty log context list check when syncing log
btrfs: update comment for struct btrfs_inode::lock
btrfs: remove pointless barrier from btrfs_sync_file()
btrfs: add and use helpers for reading and writing last_trans_committed
btrfs: add and use helpers for reading and writing fs_info->generation
btrfs: add and use helpers for reading and writing log_transid
btrfs: add and use helpers for reading and writing last_log_commit
btrfs: support cloned-device mount capability
btrfs: add helper function find_fsid_by_disk
btrfs: stop reserving excessive space for block group item insertions
btrfs: stop reserving excessive space for block group item updates
btrfs: reorder btrfs_inode to fill gaps
btrfs: open code btrfs_ordered_inode_tree in btrfs_inode
...
|
|
When creating a snapshot of a subvolume that was created in the current
transaction, we can end up not persisting a dirty extent buffer that is
referenced by the snapshot, resulting in IO errors due to checksum failures
when trying to read the extent buffer later from disk. A sequence of steps
that leads to this is the following:
1) At ioctl.c:create_subvol() we allocate an extent buffer, with logical
address 36007936, for the leaf/root of a new subvolume that has an ID
of 291. We mark the extent buffer as dirty, and at this point the
subvolume tree has a single node/leaf which is also its root (level 0);
2) We no longer commit the transaction used to create the subvolume at
create_subvol(). We used to, but that was recently removed in
commit 1b53e51a4a8f ("btrfs: don't commit transaction for every subvol
create");
3) The transaction used to create the subvolume has an ID of 33, so the
extent buffer 36007936 has a generation of 33;
4) Several updates happen to subvolume 291 during transaction 33, several
files created and its tree height changes from 0 to 1, so we end up with
a new root at level 1 and the extent buffer 36007936 is now a leaf of
that new root node, which is extent buffer 36048896.
The commit root remains as 36007936, since we are still at transaction
33;
5) Creation of a snapshot of subvolume 291, with an ID of 292, starts at
ioctl.c:create_snapshot(). This triggers a commit of transaction 33 and
we end up at transaction.c:create_pending_snapshot(), in the critical
section of a transaction commit.
There we COW the root of subvolume 291, which is extent buffer 36048896.
The COW operation returns extent buffer 36048896, since there's no need
to COW because the extent buffer was created in this transaction and it
was not written yet.
The we call btrfs_copy_root() against the root node 36048896. During
this operation we allocate a new extent buffer to turn into the root
node of the snapshot, copy the contents of the root node 36048896 into
this snapshot root extent buffer, set the owner to 292 (the ID of the
snapshot), etc, and then we call btrfs_inc_ref(). This will create a
delayed reference for each leaf pointed by the root node with a
reference root of 292 - this includes a reference for the leaf
36007936.
After that we set the bit BTRFS_ROOT_FORCE_COW in the root's state.
Then we call btrfs_insert_dir_item(), to create the directory entry in
in the tree of subvolume 291 that points to the snapshot. This ends up
needing to modify leaf 36007936 to insert the respective directory
items. Because the bit BTRFS_ROOT_FORCE_COW is set for the root's state,
we need to COW the leaf. We end up at btrfs_force_cow_block() and then
at update_ref_for_cow().
At update_ref_for_cow() we call btrfs_block_can_be_shared() which
returns false, despite the fact the leaf 36007936 is shared - the
subvolume's root and the snapshot's root point to that leaf. The
reason that it incorrectly returns false is because the commit root
of the subvolume is extent buffer 36007936 - it was the initial root
of the subvolume when we created it. So btrfs_block_can_be_shared()
which has the following logic:
int btrfs_block_can_be_shared(struct btrfs_root *root,
struct extent_buffer *buf)
{
if (test_bit(BTRFS_ROOT_SHAREABLE, &root->state) &&
buf != root->node && buf != root->commit_root &&
(btrfs_header_generation(buf) <=
btrfs_root_last_snapshot(&root->root_item) ||
btrfs_header_flag(buf, BTRFS_HEADER_FLAG_RELOC)))
return 1;
return 0;
}
Returns false (0) since 'buf' (extent buffer 36007936) matches the
root's commit root.
As a result, at update_ref_for_cow(), we don't check for the number
of references for extent buffer 36007936, we just assume it's not
shared and therefore that it has only 1 reference, so we set the local
variable 'refs' to 1.
Later on, in the final if-else statement at update_ref_for_cow():
static noinline int update_ref_for_cow(struct btrfs_trans_handle *trans,
struct btrfs_root *root,
struct extent_buffer *buf,
struct extent_buffer *cow,
int *last_ref)
{
(...)
if (refs > 1) {
(...)
} else {
(...)
btrfs_clear_buffer_dirty(trans, buf);
*last_ref = 1;
}
}
So we mark the extent buffer 36007936 as not dirty, and as a result
we don't write it to disk later in the transaction commit, despite the
fact that the snapshot's root points to it.
Attempting to access the leaf or dumping the tree for example shows
that the extent buffer was not written:
$ btrfs inspect-internal dump-tree -t 292 /dev/sdb
btrfs-progs v6.2.2
file tree key (292 ROOT_ITEM 33)
node 36110336 level 1 items 2 free space 119 generation 33 owner 292
node 36110336 flags 0x1(WRITTEN) backref revision 1
checksum stored a8103e3e
checksum calced a8103e3e
fs uuid 90c9a46f-ae9f-4626-9aff-0cbf3e2e3a79
chunk uuid e8c9c885-78f4-4d31-85fe-89e5f5fd4a07
key (256 INODE_ITEM 0) block 36007936 gen 33
key (257 EXTENT_DATA 0) block 36052992 gen 33
checksum verify failed on 36007936 wanted 0x00000000 found 0x86005f29
checksum verify failed on 36007936 wanted 0x00000000 found 0x86005f29
total bytes 107374182400
bytes used 38572032
uuid 90c9a46f-ae9f-4626-9aff-0cbf3e2e3a79
The respective on disk region is full of zeroes as the device was
trimmed at mkfs time.
Obviously 'btrfs check' also detects and complains about this:
$ btrfs check /dev/sdb
Opening filesystem to check...
Checking filesystem on /dev/sdb
UUID: 90c9a46f-ae9f-4626-9aff-0cbf3e2e3a79
generation: 33 (33)
[1/7] checking root items
[2/7] checking extents
checksum verify failed on 36007936 wanted 0x00000000 found 0x86005f29
checksum verify failed on 36007936 wanted 0x00000000 found 0x86005f29
checksum verify failed on 36007936 wanted 0x00000000 found 0x86005f29
bad tree block 36007936, bytenr mismatch, want=36007936, have=0
owner ref check failed [36007936 4096]
ERROR: errors found in extent allocation tree or chunk allocation
[3/7] checking free space tree
[4/7] checking fs roots
checksum verify failed on 36007936 wanted 0x00000000 found 0x86005f29
checksum verify failed on 36007936 wanted 0x00000000 found 0x86005f29
checksum verify failed on 36007936 wanted 0x00000000 found 0x86005f29
bad tree block 36007936, bytenr mismatch, want=36007936, have=0
The following tree block(s) is corrupted in tree 292:
tree block bytenr: 36110336, level: 1, node key: (256, 1, 0)
root 292 root dir 256 not found
ERROR: errors found in fs roots
found 38572032 bytes used, error(s) found
total csum bytes: 16048
total tree bytes: 1265664
total fs tree bytes: 1118208
total extent tree bytes: 65536
btree space waste bytes: 562598
file data blocks allocated: 65978368
referenced 36569088
Fix this by updating btrfs_block_can_be_shared() to consider that an
extent buffer may be shared if it matches the commit root and if its
generation matches the current transaction's generation.
This can be reproduced with the following script:
$ cat test.sh
#!/bin/bash
MNT=/mnt/sdi
DEV=/dev/sdi
# Use a filesystem with a 64K node size so that we have the same node
# size on every machine regardless of its page size (on x86_64 default
# node size is 16K due to the 4K page size, while on PPC it's 64K by
# default). This way we can make sure we are able to create a btree for
# the subvolume with a height of 2.
mkfs.btrfs -f -n 64K $DEV
mount $DEV $MNT
btrfs subvolume create $MNT/subvol
# Create a few empty files on the subvolume, this bumps its btree
# height to 2 (root node at level 1 and 2 leaves).
for ((i = 1; i <= 300; i++)); do
echo -n > $MNT/subvol/file_$i
done
btrfs subvolume snapshot -r $MNT/subvol $MNT/subvol/snap
umount $DEV
btrfs check $DEV
Running it on a 6.5 kernel (or any 6.6-rc kernel at the moment):
$ ./test.sh
Create subvolume '/mnt/sdi/subvol'
Create a readonly snapshot of '/mnt/sdi/subvol' in '/mnt/sdi/subvol/snap'
Opening filesystem to check...
Checking filesystem on /dev/sdi
UUID: bbdde2ff-7d02-45ca-8a73-3c36f23755a1
[1/7] checking root items
[2/7] checking extents
parent transid verify failed on 30539776 wanted 7 found 5
parent transid verify failed on 30539776 wanted 7 found 5
parent transid verify failed on 30539776 wanted 7 found 5
Ignoring transid failure
owner ref check failed [30539776 65536]
ERROR: errors found in extent allocation tree or chunk allocation
[3/7] checking free space tree
[4/7] checking fs roots
parent transid verify failed on 30539776 wanted 7 found 5
Ignoring transid failure
Wrong key of child node/leaf, wanted: (256, 1, 0), have: (2, 132, 0)
Wrong generation of child node/leaf, wanted: 5, have: 7
root 257 root dir 256 not found
ERROR: errors found in fs roots
found 917504 bytes used, error(s) found
total csum bytes: 0
total tree bytes: 851968
total fs tree bytes: 393216
total extent tree bytes: 65536
btree space waste bytes: 736550
file data blocks allocated: 0
referenced 0
A test case for fstests will follow soon.
Fixes: 1b53e51a4a8f ("btrfs: don't commit transaction for every subvol create")
CC: stable@vger.kernel.org # 6.5+
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
The btrfs_backref_cache::is_reloc is an indicator variable and should
use a bool type.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
We sync the kernel files to userspace and the 'errno' symbol is defined
by standard library, which does not matter in kernel but the parameters
or local variables could clash. Rename them all.
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
The values of level are bounded and fit into a byte so let's use it for
the structure to reduce size from 88 to 80 bytes on a release build,
which increases number of objects in the default 8K slab from 93 to 102.
struct prelim_ref {
struct rb_node rbnode __attribute__((__aligned__(8))); /* 0 24 */
u64 root_id; /* 24 8 */
struct btrfs_key key_for_search; /* 32 17 */
u8 level; /* 49 1 */
/* XXX 2 bytes hole, try to pack */
int count; /* 52 4 */
struct extent_inode_elem * inode_list; /* 56 8 */
/* --- cacheline 1 boundary (64 bytes) --- */
u64 parent; /* 64 8 */
u64 wanted_disk_byte; /* 72 8 */
/* size: 80, cachelines: 2, members: 8 */
/* sum members: 78, holes: 1, sum holes: 2 */
/* forced alignments: 1 */
/* last cacheline: 16 bytes */
} __attribute__((__aligned__(8)));
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
When using the logical to ino ioctl v2, if the flag to ignore offsets of
file extent items (BTRFS_LOGICAL_INO_ARGS_IGNORE_OFFSET) is given, the
backref walking code ends up not returning references for all file offsets
of an inode that point to the given logical bytenr. This happens since
kernel 6.2, commit 6ce6ba534418 ("btrfs: use a single argument for extent
offset in backref walking functions") because:
1) It mistakenly skipped the search for file extent items in a leaf that
point to the target extent if that flag is given. Instead it should
only skip the filtering done by check_extent_in_eb() - that is, it
should not avoid the calls to that function (or find_extent_in_eb(),
which uses it).
2) It was also not building a list of inode extent elements (struct
extent_inode_elem) if we have multiple inode references for an extent
when the ignore offset flag is given to the logical to ino ioctl - it
would leave a single element, only the last one that was found.
These stem from the confusing old interface for backref walking functions
where we had an extent item offset argument that was a pointer to a u64
and another boolean argument that indicated if the offset should be
ignored, but the pointer could be NULL. That NULL case is used by
relocation, qgroup extent accounting and fiemap, simply to avoid building
the inode extent list for each reference, as it's not necessary for those
use cases and therefore avoids memory allocations and some computations.
Fix this by adding a boolean argument to the backref walk context
structure to indicate that the inode extent list should not be built,
make relocation set that argument to true and fix the backref walking
logic to skip the calls to check_extent_in_eb() and find_extent_in_eb()
only if this new argument is true, instead of 'ignore_extent_item_pos'
being true.
A test case for fstests will be added soon, to provide cover not only
for these cases but to the logical to ino ioctl in general as well, as
currently we do not have a test case for it.
Reported-by: Vladimir Panteleev <git@vladimir.panteleev.md>
Link: https://lore.kernel.org/linux-btrfs/CAHhfkvwo=nmzrJSqZ2qMfF-rZB-ab6ahHnCD_sq9h4o8v+M7QQ@mail.gmail.com/
Fixes: 6ce6ba534418 ("btrfs: use a single argument for extent offset in backref walking functions")
CC: stable@vger.kernel.org # 6.2+
Tested-by: Vladimir Panteleev <git@vladimir.panteleev.md>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
When doing backref walking to determine a source range to clone from, it
is worthless to collect and resolve our own data backref, as we can't
obviously use it as a clone source and it represents the range we want to
clone into. Collecting the backref implies doing the extra work to resolve
it, doing the search for a file extent item in a subvolume tree, etc.
Skipping the data backref is valid as long as we only have the send root
as the single clone root, otherwise the leaf with the file extent item may
be accessible from another clone root due to shared subtrees created by
snapshots, and therefore we have to collect the backref and resolve it.
So add a callback to the backref walking code to guide it to skip data
backrefs.
This change is part of a patchset comprised of the following patches:
01/17 btrfs: fix inode list leak during backref walking at resolve_indirect_refs()
02/17 btrfs: fix inode list leak during backref walking at find_parent_nodes()
03/17 btrfs: fix ulist leaks in error paths of qgroup self tests
04/17 btrfs: remove pointless and double ulist frees in error paths of qgroup tests
05/17 btrfs: send: avoid unnecessary path allocations when finding extent clone
06/17 btrfs: send: update comment at find_extent_clone()
07/17 btrfs: send: drop unnecessary backref context field initializations
08/17 btrfs: send: avoid unnecessary backref lookups when finding clone source
09/17 btrfs: send: optimize clone detection to increase extent sharing
10/17 btrfs: use a single argument for extent offset in backref walking functions
11/17 btrfs: use a structure to pass arguments to backref walking functions
12/17 btrfs: reuse roots ulist on each leaf iteration for iterate_extent_inodes()
13/17 btrfs: constify ulist parameter of ulist_next()
14/17 btrfs: send: cache leaf to roots mapping during backref walking
15/17 btrfs: send: skip unnecessary backref iterations
16/17 btrfs: send: avoid double extent tree search when finding clone source
17/17 btrfs: send: skip resolution of our own backref when finding clone source
The following test was run on non-debug kernel (Debian's default kernel
config) before and after applying the patchset:
$ cat test-send-many-shared-extents.sh
#!/bin/bash
DEV=/dev/sdh
MNT=/mnt/sdh
umount $DEV &> /dev/null
mkfs.btrfs -f $DEV
mount $DEV $MNT
num_files=50000
num_clones_per_file=50
for ((i = 1; i <= $num_files; i++)); do
xfs_io -f -c "pwrite 0 64K" $MNT/file_$i > /dev/null
echo -ne "\r$i files created..."
done
echo
btrfs subvolume snapshot -r $MNT $MNT/snap1
cloned=0
for ((i = 1; i <= $num_clones_per_file; i++)); do
for ((j = 1; j <= $num_files; j++)); do
cp --reflink=always $MNT/file_$j $MNT/file_${j}_clone_${i}
cloned=$((cloned + 1))
echo -ne "\r$cloned / $((num_files * num_clones_per_file)) clone operations"
done
done
echo
btrfs subvolume snapshot -r $MNT $MNT/snap2
# Unmount and mount again to clear all cached metadata (and data).
umount $DEV
mount $DEV $MNT
start=$(date +%s%N)
btrfs send $MNT/snap2 > /dev/null
end=$(date +%s%N)
dur=$(( (end - start) / 1000000000 ))
echo -e "\nFull send took $dur seconds"
# Unmount and mount again to clear all cached metadata (and data).
umount $DEV
mount $DEV $MNT
start=$(date +%s%N)
btrfs send -p $MNT/snap1 $MNT/snap2 > /dev/null
end=$(date +%s%N)
dur=$(( (end - start) / 1000000000 ))
echo -e "\nIncremental send took $dur seconds"
umount $MNT
Before applying the patchset:
(...)
Full send took 1108 seconds
(...)
Incremental send took 1135 seconds
After applying the whole patchset:
(...)
Full send took 268 seconds (-75.8%)
(...)
Incremental send took 316 seconds (-72.2%)
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
At find_extent_clone() we search twice for the extent item corresponding
to the data extent that the current file extent items points to:
1) Once with a call to extent_from_logical();
2) Once again during backref walking, through iterate_extent_inodes()
which eventually leads to find_parent_nodes() where we will search
again the extent tree for the same extent item.
The extent tree can be huge, so doing this one extra search for every
extent we want to send adds up and it's expensive.
The first call is there since the send code was introduced and it
accomplishes two things:
1) Check that the extent is flagged as a data extent in the extent tree.
But it can not be anything else, otherwise we wouldn't have a file
extent item in the send root pointing to it.
This was probably added to catch bugs in the early days where send was
yet too young and the interaction with everything else was far from
perfect;
2) Check how many direct references there are on the extent, and if
there's too many (more than SEND_MAX_EXTENT_REFS), avoid doing the
backred walking as it may take too long and slowdown send.
So improve on this by having a callback in the backref walking code that
is called when it finds the extent item in the extent tree, and have those
checks done in the callback. When the callback returns anything different
from 0, it stops the backref walking code. This way we do a single search
on the extent tree for the extent item of our data extent.
Also, before this change we were only checking the number of references on
the data extent against SEND_MAX_EXTENT_REFS, but after starting backref
walking we will end up resolving backrefs for extent buffers in the path
from a leaf having a file extent item pointing to our data extent, up to
roots of trees from which the extent buffer is accessible from, due to
shared subtrees resulting from snapshoting. We were therefore allowing for
the possibility for send taking too long due to some node in the path from
the leaf to a root node being shared too many times. After this change we
check for reference counts being greater than SEND_MAX_EXTENT_REFS for
both data extents and metadata extents.
This change is part of a patchset comprised of the following patches:
01/17 btrfs: fix inode list leak during backref walking at resolve_indirect_refs()
02/17 btrfs: fix inode list leak during backref walking at find_parent_nodes()
03/17 btrfs: fix ulist leaks in error paths of qgroup self tests
04/17 btrfs: remove pointless and double ulist frees in error paths of qgroup tests
05/17 btrfs: send: avoid unnecessary path allocations when finding extent clone
06/17 btrfs: send: update comment at find_extent_clone()
07/17 btrfs: send: drop unnecessary backref context field initializations
08/17 btrfs: send: avoid unnecessary backref lookups when finding clone source
09/17 btrfs: send: optimize clone detection to increase extent sharing
10/17 btrfs: use a single argument for extent offset in backref walking functions
11/17 btrfs: use a structure to pass arguments to backref walking functions
12/17 btrfs: reuse roots ulist on each leaf iteration for iterate_extent_inodes()
13/17 btrfs: constify ulist parameter of ulist_next()
14/17 btrfs: send: cache leaf to roots mapping during backref walking
15/17 btrfs: send: skip unnecessary backref iterations
16/17 btrfs: send: avoid double extent tree search when finding clone source
17/17 btrfs: send: skip resolution of our own backref when finding clone source
Performance test results are in the changelog of patch 17/17.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
When looking for a clone source for an extent, we are iterating over all
the backreferences for an extent. This is often a waste of time, because
once we find a good clone source we could stop immediately instead of
continuing backref walking, which is expensive.
Basically what happens currently is this:
1) Call iterate_extent_inodes() to iterate over all the backreferences;
2) It calls btrfs_find_all_leafs() which in turn calls the main function
to walk over backrefs and collect them - find_parent_nodes();
3) Then we collect all the references for our target data extent from the
extent tree (and delayed refs if any), add them to the rb trees,
resolve all the indirect backreferences and search for all the file
extent items in fs trees, building a list of inodes for each one of
them (struct extent_inode_elem);
4) Then back at iterate_extent_inodes() we find all the roots associated
to each found leaf, and call the callback __iterate_backrefs defined
at send.c for each inode in the inode list associated to each leaf.
Some times one the first backreferences we find in a fs tree is optimal
to satisfy the clone operation that send wants to perform, and in that
case we could stop immediately and avoid resolving all the remaining
indirect backreferences (search fs trees for the respective file extent
items, etc). This possibly if when we find a fs tree leaf with a file
extent item we are able to know what are all the roots that can lead to
the leaf - this is now possible after the previous patch in the series
that adds a cache that maps leaves to a list of roots. So we can now
shortcircuit backref walking during send, by having the callback we
pass to iterate_extent_inodes() to be called when we find a file extent
item for an indirect backreference, and have it return a special value
when it found a suitable backreference and it does not need to look for
more backreferences. This change does that.
This change is part of a patchset comprised of the following patches:
01/17 btrfs: fix inode list leak during backref walking at resolve_indirect_refs()
02/17 btrfs: fix inode list leak during backref walking at find_parent_nodes()
03/17 btrfs: fix ulist leaks in error paths of qgroup self tests
04/17 btrfs: remove pointless and double ulist frees in error paths of qgroup tests
05/17 btrfs: send: avoid unnecessary path allocations when finding extent clone
06/17 btrfs: send: update comment at find_extent_clone()
07/17 btrfs: send: drop unnecessary backref context field initializations
08/17 btrfs: send: avoid unnecessary backref lookups when finding clone source
09/17 btrfs: send: optimize clone detection to increase extent sharing
10/17 btrfs: use a single argument for extent offset in backref walking functions
11/17 btrfs: use a structure to pass arguments to backref walking functions
12/17 btrfs: reuse roots ulist on each leaf iteration for iterate_extent_inodes()
13/17 btrfs: constify ulist parameter of ulist_next()
14/17 btrfs: send: cache leaf to roots mapping during backref walking
15/17 btrfs: send: skip unnecessary backref iterations
16/17 btrfs: send: avoid double extent tree search when finding clone source
17/17 btrfs: send: skip resolution of our own backref when finding clone source
Performance test results are in the changelog of patch 17/17.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
During a send operation, when doing backref walking to determine which
inodes/offsets/roots we can clone from, the most repetitive and expensive
step is to map each leaf that has file extent items pointing to the target
data extent to the IDs of the roots from which the leaves are accessible,
which happens at iterate_extent_inodes(). That step requires finding every
parent node of a leaf, then the parent of each parent, and so on until we
reach a root node. So it's a naturally expensive operation, and repetitive
because each leaf can have hundreds of file extent items (for a nodesize
of 16K, that can be slightly over 200 file extent items). There's also
temporal locality, as we process all file extent items from a leave before
moving the next leaf.
This change caches the mapping of leaves to root IDs, to avoid repeating
those computations over and over again. The cache is limited to a maximum
of 128 entries, with each entry being a struct with a size of 128 bytes,
so the maximum cache size is 16K plus any nodes internally allocated by
the maple tree that is used to index pointers to those structs. The cache
is invalidated whenever we detect relocation happened since we started
filling the cache, because if relocation happened then extent buffers for
leaves and nodes of the trees used by a send operation may have been
reallocated.
This cache also allows for another important optimization that is
introduced in the next patch in the series.
This change is part of a patchset comprised of the following patches:
01/17 btrfs: fix inode list leak during backref walking at resolve_indirect_refs()
02/17 btrfs: fix inode list leak during backref walking at find_parent_nodes()
03/17 btrfs: fix ulist leaks in error paths of qgroup self tests
04/17 btrfs: remove pointless and double ulist frees in error paths of qgroup tests
05/17 btrfs: send: avoid unnecessary path allocations when finding extent clone
06/17 btrfs: send: update comment at find_extent_clone()
07/17 btrfs: send: drop unnecessary backref context field initializations
08/17 btrfs: send: avoid unnecessary backref lookups when finding clone source
09/17 btrfs: send: optimize clone detection to increase extent sharing
10/17 btrfs: use a single argument for extent offset in backref walking functions
11/17 btrfs: use a structure to pass arguments to backref walking functions
12/17 btrfs: reuse roots ulist on each leaf iteration for iterate_extent_inodes()
13/17 btrfs: constify ulist parameter of ulist_next()
14/17 btrfs: send: cache leaf to roots mapping during backref walking
15/17 btrfs: send: skip unnecessary backref iterations
16/17 btrfs: send: avoid double extent tree search when finding clone source
17/17 btrfs: send: skip resolution of our own backref when finding clone source
Performance test results are in the changelog of patch 17/17.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
The public backref walking functions have quite a lot of arguments that
are passed down the call stack to find_parent_nodes(), the core function
of the backref walking code.
The next patches in series will need to add even arguments to these
functions that should be passed not only to find_parent_nodes(), but also
to other functions used by the later (directly or even lower in the call
stack).
So create a structure to hold all these arguments and state used by the
main backref walking function, find_parent_nodes(), and use it as the
argument for the public backref walking functions iterate_extent_inodes(),
btrfs_find_all_leafs() and btrfs_find_all_roots().
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
The interface for find_parent_nodes() has two extent offset related
arguments:
1) One u64 pointer argument for the extent offset;
2) One boolean argument to tell if the extent offset should be ignored or
not.
These are confusing, becase the extent offset pointer can be NULL and in
some cases callers pass a NULL value as a way to tell the backref walking
code to ignore offsets in file extent items (and simply consider all file
extent items that point to the target data extent).
The boolean argument was added in commit c995ab3cda3f ("btrfs: add a flag
to iterate_inodes_from_logical to find all extent refs for uncompressed
extents"), but it was never really necessary, it was enough if it could
find a way to get a NULL value passed to the "extent_item_pos" argument of
find_parent_nodes(). The arguments are also passed to functions called
by find_parent_nodes() and respective helper functions, which further
makes everything more complicated than needed.
Then we have several backref walking related functions that end up calling
find_parent_nodes(), either directly or through some other function that
they call, and for many we have to use an "extent_item_pos" (u64) argument
and a boolean "ignore_offset" argument too.
This is confusing and not really necessary. So use a single argument to
specify the extent offset, as a simple u64 and not as a pointer, but
using a special value of (u64)-1, defined as a documented constant, to
indicate when the extent offset should be ignored.
This is also preparation work for the upcoming patches in the series that
add other arguments to find_parent_nodes() and other related functions
that use it.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Currently send does not do the best decisions when it comes to decide
between multiple clone sources, which results in clone operations for
partial extent ranges, which has the following disadvantages:
1) We get less shared extents at the destination;
2) We have to read more data during the send operation and emit more
write commands.
Besides not being optimal behaviour, it also breaks user expectations and
is often reported by users, with a recent example in the Link tag at the
bottom of this change log.
Part of the reason for this non-optimal behaviour is that the backref
walking code does not provide information about the length of the file
extent items that were found for each backref, so send is blind about
which backref is the best to chose as a cloning source.
The other existing reasons are just silliness, namely always prefering
the inode with the lowest number when multiple are found for the same
root and when we can clone from multiple roots, always prefer the send
root over any of the other clone roots. This does not make any sense
since any inode or root is fine and as good as any other inode/root.
Fix this by making backref walking pass information about the number of
bytes referenced by each file extent item and then have send's backref
callback pick the inode with the highest number of bytes for each root.
Finally select the root from which we can clone more bytes from.
Example reproducer:
$ cat test.sh
#!/bin/bash
DEV=/dev/sdi
MNT=/mnt/sdi
mkfs.btrfs -f $DEV
mount $DEV $MNT
xfs_io -f -c "pwrite -S 0xab -b 2M 0 2M" $MNT/foo
cp --reflink=always $MNT/foo $MNT/bar
cp --reflink=always $MNT/foo $MNT/baz
sync
# Overwrite the second half of file foo.
xfs_io -c "pwrite -S 0xcd -b 1M 1M 1M" $MNT/foo
sync
echo
echo "*** fiemap in the original filesystem ***"
echo
xfs_io -c "fiemap -v" $MNT/foo
xfs_io -c "fiemap -v" $MNT/bar
xfs_io -c "fiemap -v" $MNT/baz
echo
btrfs filesystem du $MNT
btrfs subvolume snapshot -r $MNT $MNT/snap
btrfs send -f /tmp/send_stream $MNT/snap
umount $MNT
mkfs.btrfs -f $DEV &> /dev/null
mount $DEV $MNT
btrfs receive -f /tmp/send_stream $MNT
echo
echo "*** fiemap in the new filesystem ***"
echo
xfs_io -r -c "fiemap -v" $MNT/snap/foo
xfs_io -r -c "fiemap -v" $MNT/snap/bar
xfs_io -r -c "fiemap -v" $MNT/snap/baz
echo
btrfs filesystem du $MNT
rm -f /tmp/send_stream
rm -f /tmp/snap.fssum
umount $MNT
Before this change:
$ ./test.sh
(...)
*** fiemap in the original filesystem ***
/mnt/sdi/foo:
EXT: FILE-OFFSET BLOCK-RANGE TOTAL FLAGS
0: [0..2047]: 26624..28671 2048 0x2000
1: [2048..4095]: 30720..32767 2048 0x1
/mnt/sdi/bar:
EXT: FILE-OFFSET BLOCK-RANGE TOTAL FLAGS
0: [0..4095]: 26624..30719 4096 0x2001
/mnt/sdi/baz:
EXT: FILE-OFFSET BLOCK-RANGE TOTAL FLAGS
0: [0..4095]: 26624..30719 4096 0x2001
Total Exclusive Set shared Filename
2.00MiB 1.00MiB - /mnt/sdi/foo
2.00MiB 0.00B - /mnt/sdi/bar
2.00MiB 0.00B - /mnt/sdi/baz
6.00MiB 1.00MiB 2.00MiB /mnt/sdi
Create a readonly snapshot of '/mnt/sdi' in '/mnt/sdi/snap'
At subvol /mnt/sdi/snap
At subvol snap
*** fiemap in the new filesystem ***
/mnt/sdi/snap/foo:
EXT: FILE-OFFSET BLOCK-RANGE TOTAL FLAGS
0: [0..4095]: 26624..30719 4096 0x2001
/mnt/sdi/snap/bar:
EXT: FILE-OFFSET BLOCK-RANGE TOTAL FLAGS
0: [0..2047]: 26624..28671 2048 0x2000
1: [2048..4095]: 30720..32767 2048 0x1
/mnt/sdi/snap/baz:
EXT: FILE-OFFSET BLOCK-RANGE TOTAL FLAGS
0: [0..2047]: 26624..28671 2048 0x2000
1: [2048..4095]: 32768..34815 2048 0x1
Total Exclusive Set shared Filename
2.00MiB 0.00B - /mnt/sdi/snap/foo
2.00MiB 1.00MiB - /mnt/sdi/snap/bar
2.00MiB 1.00MiB - /mnt/sdi/snap/baz
6.00MiB 2.00MiB - /mnt/sdi/snap
6.00MiB 2.00MiB 2.00MiB /mnt/sdi
We end up with two 1M extents that are not shared for files bar and baz.
After this change:
$ ./test.sh
(...)
*** fiemap in the original filesystem ***
/mnt/sdi/foo:
EXT: FILE-OFFSET BLOCK-RANGE TOTAL FLAGS
0: [0..2047]: 26624..28671 2048 0x2000
1: [2048..4095]: 30720..32767 2048 0x1
/mnt/sdi/bar:
EXT: FILE-OFFSET BLOCK-RANGE TOTAL FLAGS
0: [0..4095]: 26624..30719 4096 0x2001
/mnt/sdi/baz:
EXT: FILE-OFFSET BLOCK-RANGE TOTAL FLAGS
0: [0..4095]: 26624..30719 4096 0x2001
Total Exclusive Set shared Filename
2.00MiB 1.00MiB - /mnt/sdi/foo
2.00MiB 0.00B - /mnt/sdi/bar
2.00MiB 0.00B - /mnt/sdi/baz
6.00MiB 1.00MiB 2.00MiB /mnt/sdi
Create a readonly snapshot of '/mnt/sdi' in '/mnt/sdi/snap'
At subvol /mnt/sdi/snap
At subvol snap
*** fiemap in the new filesystem ***
/mnt/sdi/snap/foo:
EXT: FILE-OFFSET BLOCK-RANGE TOTAL FLAGS
0: [0..4095]: 26624..30719 4096 0x2001
/mnt/sdi/snap/bar:
EXT: FILE-OFFSET BLOCK-RANGE TOTAL FLAGS
0: [0..2047]: 26624..28671 2048 0x2000
1: [2048..4095]: 30720..32767 2048 0x2001
/mnt/sdi/snap/baz:
EXT: FILE-OFFSET BLOCK-RANGE TOTAL FLAGS
0: [0..2047]: 26624..28671 2048 0x2000
1: [2048..4095]: 30720..32767 2048 0x2001
Total Exclusive Set shared Filename
2.00MiB 0.00B - /mnt/sdi/snap/foo
2.00MiB 0.00B - /mnt/sdi/snap/bar
2.00MiB 0.00B - /mnt/sdi/snap/baz
6.00MiB 0.00B - /mnt/sdi/snap
6.00MiB 0.00B 3.00MiB /mnt/sdi
Now there's a much better sharing, files bar and baz share 1M of the
extent of file foo and the second extent of files bar and baz is shared
between themselves.
This will later be turned into a test case for fstests.
Link: https://lore.kernel.org/linux-btrfs/20221008005704.795b44b0@crass-HP-ZBook-15-G2/
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
There's only one caller that passes GFP_NOFS, we can drop the parameter
an use the flags directly.
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
We have a bunch of printk helpers that are in ctree.h. These have
nothing to do with ctree.c, so move them into their own header.
Subsequent patches will cleanup the printk helpers.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
During fiemap, when determining if a data extent is shared or not, if we
don't find the extent is directly shared, then we need to determine if
it's shared through subtrees. For that we need to resolve the indirect
reference we found in order to figure out the path in the inode's fs tree,
which is a path starting at the fs tree's root node and going down to the
leaf that contains the file extent item that points to the data extent.
We then proceed to determine if any extent buffer in that path is shared
with other trees or not.
Currently whenever we find the data extent that a file extent item points
to is not directly shared, we always resolve the path in the fs tree, and
then check if any extent buffer in the path is shared. This is a lot of
work and when we have file extent items that belong to the same leaf, we
have the same path, so we only need to calculate it once.
This change does that, it keeps track of the current and previous leaf,
and when we find that a data extent is not directly shared, we try to
compute the fs tree path only once and then use it for every other file
extent item in the same leaf, using the existing cached path result for
the leaf as long as the cache results are valid.
This saves us from doing expensive b+tree searches in the fs tree of our
target inode, as well as other minor work.
The following test was run on a non-debug kernel (Debian's default kernel
config):
$ cat test-with-snapshots.sh
#!/bin/bash
DEV=/dev/sdi
MNT=/mnt/sdi
umount $DEV &> /dev/null
mkfs.btrfs -f $DEV
# Use compression to quickly create files with a lot of extents
# (each with a size of 128K).
mount -o compress=lzo $DEV $MNT
# 40G gives 327680 extents, each with a size of 128K.
xfs_io -f -c "pwrite -S 0xab -b 1M 0 40G" $MNT/foobar
# Add some more files to increase the size of the fs and extent
# trees (in the real world there's a lot of files and extents
# from other files).
xfs_io -f -c "pwrite -S 0xcd -b 1M 0 20G" $MNT/file1
xfs_io -f -c "pwrite -S 0xef -b 1M 0 20G" $MNT/file2
xfs_io -f -c "pwrite -S 0x73 -b 1M 0 20G" $MNT/file3
# Create a snapshot so all the extents become indirectly shared
# through subtrees, with a generation less than or equals to the
# generation used to create the snapshot.
btrfs subvolume snapshot -r $MNT $MNT/snap1
umount $MNT
mount -o compress=lzo $DEV $MNT
start=$(date +%s%N)
filefrag $MNT/foobar
end=$(date +%s%N)
dur=$(( (end - start) / 1000000 ))
echo "fiemap took $dur milliseconds (metadata not cached)"
echo
start=$(date +%s%N)
filefrag $MNT/foobar
end=$(date +%s%N)
dur=$(( (end - start) / 1000000 ))
echo "fiemap took $dur milliseconds (metadata cached)"
umount $MNT
Result before applying this patch:
(...)
/mnt/sdi/foobar: 327680 extents found
fiemap took 1204 milliseconds (metadata not cached)
/mnt/sdi/foobar: 327680 extents found
fiemap took 729 milliseconds (metadata cached)
Result after applying this patch:
(...)
/mnt/sdi/foobar: 327680 extents found
fiemap took 732 milliseconds (metadata not cached)
/mnt/sdi/foobar: 327680 extents found
fiemap took 421 milliseconds (metadata cached)
That's a -46.1% total reduction for the metadata not cached case, and
a -42.2% reduction for the cached metadata case.
The test is somewhat limited in the sense the gains may be higher in
practice, because in the test the filesystem is small, so we have small
fs and extent trees, plus there's no concurrent access to the trees as
well, therefore no lock contention there.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
During fiemap we process all the file extent items of an inode, by their
file offset order (left to right b+tree order), and then check if the data
extent they point at is shared or not. Until now we didn't cache those
results, we only did it for b+tree nodes/leaves since for each unique
b+tree path we have access to hundreds of file extent items. However, it
is also common to repeat checking the sharedness of a particular data
extent in a very short time window, and the cases that lead to that are
the following:
1) COW writes.
If have a file extent item like this:
[ bytenr X, offset = 0, num_bytes = 512K ]
file offset 0 512K
Then a 4K write into file offset 64K happens, we end up with the
following file extent item layout:
[ bytenr X, offset = 0, num_bytes = 64K ]
file offset 0 64K
[ bytenr Y, offset = 0, num_bytes = 4K ]
file offset 64K 68K
[ bytenr X, offset = 68K, num_bytes = 444K ]
file offset 68K 512K
So during fiemap we well check for the sharedness of the data extent
with bytenr X twice. Typically for COW writes and for at least
moderately updated files, we end up with many file extent items that
point to different sections of the same data extent.
2) Writing into a NOCOW file after a snapshot is taken.
This happens if the target extent was created in a generation older
than the generation where the last snapshot for the root (the tree the
inode belongs to) was made.
This leads to a scenario like the previous one.
3) Writing into sections of a preallocated extent.
For example if a file has the following layout:
[ bytenr X, offset = 0, num_bytes = 1M, type = prealloc ]
0 1M
After doing a 4K write into file offset 0 and another 4K write into
offset 512K, we get the following layout:
[ bytenr X, offset = 0, num_bytes = 4K, type = regular ]
0 4K
[ bytenr X, offset = 4K, num_bytes = 508K, type = prealloc ]
4K 512K
[ bytenr X, offset = 512K, num_bytes = 4K, type = regular ]
512K 516K
[ bytenr X, offset = 516K, num_bytes = 508K, type = prealloc ]
516K 1M
So we end up with 4 consecutive file extent items pointing to the data
extent at bytenr X.
4) Hole punching in the middle of an extent.
For example if a file has the following file extent item:
[ bytenr X, offset = 0, num_bytes = 8M ]
0 8M
And then hole is punched for the file range [4M, 6M[, we our file
extent item split into two:
[ bytenr X, offset = 0, num_bytes = 4M ]
0 4M
[ 2M hole, implicit or explicit depending on NO_HOLES feature ]
4M 6M
[ bytenr X, offset = 6M, num_bytes = 2M ]
6M 8M
Again, we end up with two file extent items pointing to the same
data extent.
5) When reflinking (clone and deduplication) within the same file.
This is probably the least common case of all.
In cases 1, 2, 4 and 4, when we have multiple file extent items that point
to the same data extent, their distance is usually short, typically
separated by a few slots in a b+tree leaf (or across sibling leaves). For
case 5, the distance can vary a lot, but it's typically the less common
case.
This change caches the result of the sharedness checks for data extents,
but only for the last 8 extents that we notice that our inode refers to
with multiple file extent items. Whenever we want to check if a data
extent is shared, we lookup the cache which consists of doing a linear
scan of an 8 elements array, and if we find the data extent there, we
return the result and don't check the extent tree and delayed refs.
The array/cache is small so that doing the search has no noticeable
negative impact on the performance in case we don't have file extent items
within a distance of 8 slots that point to the same data extent.
Slots in the cache/array are overwritten in a simple round robin fashion,
as that approach fits very well.
Using this simple approach with only the last 8 data extents seen is
effective as usually when multiple file extents items point to the same
data extent, their distance is within 8 slots. It also uses very little
memory and the time to cache a result or lookup the cache is negligible.
The following test was run on non-debug kernel (Debian's default kernel
config) to measure the impact in the case of COW writes (first example
given above), where we run fiemap after overwriting 33% of the blocks of
a file:
$ cat test.sh
#!/bin/bash
DEV=/dev/sdi
MNT=/mnt/sdi
umount $DEV &> /dev/null
mkfs.btrfs -f $DEV
mount $DEV $MNT
FILE_SIZE=$((1 * 1024 * 1024 * 1024))
# Create the file full of 1M extents.
xfs_io -f -s -c "pwrite -b 1M -S 0xab 0 $FILE_SIZE" $MNT/foobar
block_count=$((FILE_SIZE / 4096))
# Overwrite about 33% of the file blocks.
overwrite_count=$((block_count / 3))
echo -e "\nOverwriting $overwrite_count 4K blocks (out of $block_count)..."
RANDOM=123
for ((i = 1; i <= $overwrite_count; i++)); do
off=$(((RANDOM % block_count) * 4096))
xfs_io -c "pwrite -S 0xcd $off 4K" $MNT/foobar > /dev/null
echo -ne "\r$i blocks overwritten..."
done
echo -e "\n"
# Unmount and mount to clear all cached metadata.
umount $MNT
mount $DEV $MNT
start=$(date +%s%N)
filefrag $MNT/foobar
end=$(date +%s%N)
dur=$(( (end - start) / 1000000 ))
echo "fiemap took $dur milliseconds"
umount $MNT
Result before applying this patch:
fiemap took 128 milliseconds
Result after applying this patch:
fiemap took 92 milliseconds (-28.1%)
The test is somewhat limited in the sense the gains may be higher in
practice, because in the test the filesystem is small, so we have small
fs and extent trees, plus there's no concurrent access to the trees as
well, therefore no lock contention there.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Currently btrfs_is_data_extent_shared() is passing a ulist for the roots
argument of find_parent_nodes(), however it does not use that ulist for
anything and for this context that list always ends up with at most one
element.
Since find_parent_nodes() is able to deal with a NULL ulist for its roots
argument, make btrfs_is_data_extent_shared() pass it NULL and avoid the
burden of allocating memory for the unnused roots ulist, initializing it,
releasing it and allocating one struct ulist_node for it during the call
to find_parent_nodes().
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
When calling btrfs_is_data_extent_shared() we pass two ulists that were
allocated by the caller. This is because the single caller, fiemap, calls
btrfs_is_data_extent_shared() multiple times and the ulists can be reused,
instead of allocating new ones before each call and freeing them after
each call.
Now that we have a context structure/object that we pass to
btrfs_is_data_extent_shared(), we can move those ulists to it, and hide
their allocation and the context's allocation in a helper function, as
well as the freeing of the ulists and the context object. This allows to
reduce the number of parameters passed to btrfs_is_data_extent_shared(),
the need to pass the ulists from extent_fiemap() to fiemap_process_hole()
and having the caller deal with allocating and releasing the ulists.
Also rename one of the ulists from 'tmp' / 'tmp_ulist' to 'refs', since
that's a much better name as it reflects what the list is used for (and
matching the argument name for find_parent_nodes()).
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Right now we are using a struct btrfs_backref_shared_cache to pass state
across multiple btrfs_is_data_extent_shared() calls. The structure's name
closely follows its current purpose, which is to cache previous checks
for the sharedness of metadata extents. However we will start using the
structure for more things other than caching sharedness checks, so rename
it to struct btrfs_backref_share_check_ctx.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Currently we pass a root and an inode number as arguments for
btrfs_is_data_extent_shared() and the inode number is always from an
inode that belongs to that root (it wouldn't make sense otherwise).
In every context that we call btrfs_is_data_extent_shared() (fiemap only),
we have an inode available, so directly pass the inode to the function
instead of a root and inode number. This reduces the number of parameters
and it makes the function's signature conform to most other functions we
have.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
The path cache used during fiemap used to determine the sharedness of
extent buffers in a path from a leaf containing a file extent item
pointing to our data extent up to the root node of the tree, is meant to
be used for a single path. Having a single path is by far the most common
case, and therefore worth to optimize for, but it's possible to actually
have multiple paths because we have 2 or more leaves.
If we have multiple leaves, the 'level' variable keeps getting incremented
in each iteration of the while loop at btrfs_is_data_extent_shared(),
which means we will treat the second leaf in the 'tmp' ulist as a level 1
node, and so forth. In the worst case this can lead to getting a level
greater than or equals to BTRFS_MAX_LEVEL (8), which will trigger a
WARN_ON_ONCE() in the functions to lookup from or store in the path cache
(lookup_backref_shared_cache() and store_backref_shared_cache()). If the
current level never goes beyond 8, due to shared nodes in the paths and
a fs tree height smaller than 8, it can still result in incorrectly
marking one leaf as shared because some other leaf is shared and is stored
one level below that other leaf, as when storing a true sharedness value
in the cache results in updating the sharedness to true of all entries in
the cache below the current level.
Having multiple leaves happens in a case like the following:
- We have a file extent item point to data extent at bytenr X, for
a file range [0, 1M[ for example;
- At this moment we have an extent data ref for the extent, with
an offset of 0 and a count of 1;
- A write into the middle of the extent happens, file range [64K, 128K)
so the file extent item is split into two (at btrfs_drop_extents()):
1) One for file range [0, 64K), with a length (num_bytes field) of
64K and an extent offset of 0;
2) Another one for file range [128K, 1M), with a length of 896K
(1M - 128K) and an extent offset of 128K.
- At this moment the two file extent items are located in the same
leaf;
- A new file extent item for the range [64K, 128K), pointing to a new
data extent, is inserted in the leaf. This results in a leaf split
and now those two file extent items pointing to data extent X end
up located in different leaves;
- Once delayed refs are run, we still have a single extent data ref
item for our data extent at bytenr X, for offset 0, but now with a
count of 2 instead of 1;
- So during fiemap, at btrfs_is_data_extent_shared(), after we call
find_parent_nodes() for the data extent, we get two leaves, since
we have two file extent items point to data extent at bytenr X that
are located in two different leaves.
So skip the use of the path cache when we get more than one leaf.
Fixes: 12a824dc67a61e ("btrfs: speedup checking for extent sharedness during fiemap")
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
During fiemap, for each file extent we find, we must check if it's shared
or not. The sharedness check starts by verifying if the extent is directly
shared (its refcount in the extent tree is > 1), and if it is not directly
shared, then we will check if every node in the subvolume b+tree leading
from the root to the leaf that has the file extent item (in reverse order),
is shared (through snapshots).
However this second step is not needed if our extent was created in a
transaction more recent than the last transaction where a snapshot of the
inode's root happened, because it can't be shared indirectly (through
shared subtrees) without a snapshot created in a more recent transaction.
So grab the generation of the extent from the extent map and pass it to
btrfs_is_data_extent_shared(), which will skip this second phase when the
generation is more recent than the root's last snapshot value. Note that
we skip this optimization if the extent map is the result of merging 2
or more extent maps, because in this case its generation is the maximum
of the generations of all merged extent maps.
The fact the we use extent maps and they can be merged despite the
underlying extents being distinct (different file extent items in the
subvolume b+tree and different extent items in the extent b+tree), can
result in some bugs when reporting shared extents. But this is a problem
of the current implementation of fiemap relying on extent maps.
One example where we get incorrect results is:
$ cat fiemap-bug.sh
#!/bin/bash
DEV=/dev/sdj
MNT=/mnt/sdj
mkfs.btrfs -f $DEV
mount $DEV $MNT
# Create a file with two 256K extents.
# Since there is no other write activity, they will be contiguous,
# and their extent maps merged, despite having two distinct extents.
xfs_io -f -c "pwrite -S 0xab 0 256K" \
-c "fsync" \
-c "pwrite -S 0xcd 256K 256K" \
-c "fsync" \
$MNT/foo
# Now clone only the second extent into another file.
xfs_io -f -c "reflink $MNT/foo 256K 0 256K" $MNT/bar
# Filefrag will report a single 512K extent, and say it's not shared.
echo
filefrag -v $MNT/foo
umount $MNT
Running the reproducer:
$ ./fiemap-bug.sh
wrote 262144/262144 bytes at offset 0
256 KiB, 64 ops; 0.0038 sec (65.479 MiB/sec and 16762.7030 ops/sec)
wrote 262144/262144 bytes at offset 262144
256 KiB, 64 ops; 0.0040 sec (61.125 MiB/sec and 15647.9218 ops/sec)
linked 262144/262144 bytes at offset 0
256 KiB, 1 ops; 0.0002 sec (1.034 GiB/sec and 4237.2881 ops/sec)
Filesystem type is: 9123683e
File size of /mnt/sdj/foo is 524288 (128 blocks of 4096 bytes)
ext: logical_offset: physical_offset: length: expected: flags:
0: 0.. 127: 3328.. 3455: 128: last,eof
/mnt/sdj/foo: 1 extent found
We end up reporting that we have a single 512K that is not shared, however
we have two 256K extents, and the second one is shared. Changing the
reproducer to clone instead the first extent into file 'bar', makes us
report a single 512K extent that is shared, which is algo incorrect since
we have two 256K extents and only the first one is shared.
This is z problem that existed before this change, and remains after this
change, as it can't be easily fixed. The next patch in the series reworks
fiemap to primarily use file extent items instead of extent maps (except
for checking for delalloc ranges), with the goal of improving its
scalability and performance, but it also ends up fixing this particular
bug caused by extent map merging.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
One of the most expensive tasks performed during fiemap is to check if
an extent is shared. This task has two major steps:
1) Check if the data extent is shared. This implies checking the extent
item in the extent tree, checking delayed references, etc. If we
find the data extent is directly shared, we terminate immediately;
2) If the data extent is not directly shared (its extent item has a
refcount of 1), then it may be shared if we have snapshots that share
subtrees of the inode's subvolume b+tree. So we check if the leaf
containing the file extent item is shared, then its parent node, then
the parent node of the parent node, etc, until we reach the root node
or we find one of them is shared - in which case we stop immediately.
During fiemap we process the extents of a file from left to right, from
file offset 0 to EOF. This means that we iterate b+tree leaves from left
to right, and has the implication that we keep repeating that second step
above several times for the same b+tree path of the inode's subvolume
b+tree.
For example, if we have two file extent items in leaf X, and the path to
leaf X is A -> B -> C -> X, then when we try to determine if the data
extent referenced by the first extent item is shared, we check if the data
extent is shared - if it's not, then we check if leaf X is shared, if not,
then we check if node C is shared, if not, then check if node B is shared,
if not than check if node A is shared. When we move to the next file
extent item, after determining the data extent is not shared, we repeat
the checks for X, C, B and A - doing all the expensive searches in the
extent tree, delayed refs, etc. If we have thousands of tile extents, then
we keep repeating the sharedness checks for the same paths over and over.
On a file that has no shared extents or only a small portion, it's easy
to see that this scales terribly with the number of extents in the file
and the sizes of the extent and subvolume b+trees.
This change eliminates the repeated sharedness check on extent buffers
by caching the results of the last path used. The results can be used as
long as no snapshots were created since they were cached (for not shared
extent buffers) or no roots were dropped since they were cached (for
shared extent buffers). This greatly reduces the time spent by fiemap for
files with thousands of extents and/or large extent and subvolume b+trees.
Example performance test:
$ cat fiemap-perf-test.sh
#!/bin/bash
DEV=/dev/sdi
MNT=/mnt/sdi
mkfs.btrfs -f $DEV
mount -o compress=lzo $DEV $MNT
# 40G gives 327680 128K file extents (due to compression).
xfs_io -f -c "pwrite -S 0xab -b 1M 0 40G" $MNT/foobar
umount $MNT
mount -o compress=lzo $DEV $MNT
start=$(date +%s%N)
filefrag $MNT/foobar
end=$(date +%s%N)
dur=$(( (end - start) / 1000000 ))
echo "fiemap took $dur milliseconds (metadata not cached)"
start=$(date +%s%N)
filefrag $MNT/foobar
end=$(date +%s%N)
dur=$(( (end - start) / 1000000 ))
echo "fiemap took $dur milliseconds (metadata cached)"
umount $MNT
Before this patch:
$ ./fiemap-perf-test.sh
(...)
/mnt/sdi/foobar: 327680 extents found
fiemap took 3597 milliseconds (metadata not cached)
/mnt/sdi/foobar: 327680 extents found
fiemap took 2107 milliseconds (metadata cached)
After this patch:
$ ./fiemap-perf-test.sh
(...)
/mnt/sdi/foobar: 327680 extents found
fiemap took 1646 milliseconds (metadata not cached)
/mnt/sdi/foobar: 327680 extents found
fiemap took 698 milliseconds (metadata cached)
That's about 2.2x faster when no metadata is cached, and about 3x faster
when all metadata is cached. On a real filesystem with many other files,
data, directories, etc, the b+trees will be 2 or 3 levels higher,
therefore this optimization will have a higher impact.
Several reports of a slow fiemap show up often, the two Link tags below
refer to two recent reports of such slowness. This patch, together with
the next ones in the series, is meant to address that.
Link: https://lore.kernel.org/linux-btrfs/21dd32c6-f1f9-f44a-466a-e18fdc6788a7@virtuozzo.com/
Link: https://lore.kernel.org/linux-btrfs/Ysace25wh5BbLd5f@atmark-techno.com/
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
The function btrfs_check_shared() is supposed to be used to check if a
data extent is shared, but its name is too generic, may easily cause
confusion in the sense that it may be used for metadata extents.
So rename it to btrfs_is_data_extent_shared(), which will also make it
less confusing after the next change that adds a backref lookup cache for
the b+tree nodes that lead to the leaf that contains the file extent item
that points to the target data extent.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
There's only one function we pass to iterate_inodes_from_logical as
iterator, so we can drop the indirection and call it directly, after
moving the function to backref.c
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Currently all the callers of btrfs_find_all_roots() pass a value of false
for its ignore_offset argument. This makes the argument pointless and we
can remove it and make btrfs_find_all_roots() always pass false as the
ignore_offset argument for btrfs_find_all_roots_safe(). So just do that.
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
At btrfs_qgroup_trace_extent_post() we call btrfs_find_all_roots() with a
NULL value as the transaction handle argument, which makes that function
take the commit_root_sem semaphore, which is necessary when we don't hold
a transaction handle or any other mechanism to prevent a transaction
commit from wiping out commit roots.
However btrfs_qgroup_trace_extent_post() can be called in a context where
we are holding a write lock on an extent buffer from a subvolume tree,
namely from btrfs_truncate_inode_items(), called either during truncate
or unlink operations. In this case we end up with a lock inversion problem
because the commit_root_sem is a higher level lock, always supposed to be
acquired before locking any extent buffer.
Lockdep detects this lock inversion problem since we switched the extent
buffer locks from custom locks to semaphores, and when running btrfs/158
from fstests, it reported the following trace:
[ 9057.626435] ======================================================
[ 9057.627541] WARNING: possible circular locking dependency detected
[ 9057.628334] 5.14.0-rc2-btrfs-next-93 #1 Not tainted
[ 9057.628961] ------------------------------------------------------
[ 9057.629867] kworker/u16:4/30781 is trying to acquire lock:
[ 9057.630824] ffff8e2590f58760 (btrfs-tree-00){++++}-{3:3}, at: __btrfs_tree_read_lock+0x24/0x110 [btrfs]
[ 9057.632542]
but task is already holding lock:
[ 9057.633551] ffff8e25582d4b70 (&fs_info->commit_root_sem){++++}-{3:3}, at: iterate_extent_inodes+0x10b/0x280 [btrfs]
[ 9057.635255]
which lock already depends on the new lock.
[ 9057.636292]
the existing dependency chain (in reverse order) is:
[ 9057.637240]
-> #1 (&fs_info->commit_root_sem){++++}-{3:3}:
[ 9057.638138] down_read+0x46/0x140
[ 9057.638648] btrfs_find_all_roots+0x41/0x80 [btrfs]
[ 9057.639398] btrfs_qgroup_trace_extent_post+0x37/0x70 [btrfs]
[ 9057.640283] btrfs_add_delayed_data_ref+0x418/0x490 [btrfs]
[ 9057.641114] btrfs_free_extent+0x35/0xb0 [btrfs]
[ 9057.641819] btrfs_truncate_inode_items+0x424/0xf70 [btrfs]
[ 9057.642643] btrfs_evict_inode+0x454/0x4f0 [btrfs]
[ 9057.643418] evict+0xcf/0x1d0
[ 9057.643895] do_unlinkat+0x1e9/0x300
[ 9057.644525] do_syscall_64+0x3b/0xc0
[ 9057.645110] entry_SYSCALL_64_after_hwframe+0x44/0xae
[ 9057.645835]
-> #0 (btrfs-tree-00){++++}-{3:3}:
[ 9057.646600] __lock_acquire+0x130e/0x2210
[ 9057.647248] lock_acquire+0xd7/0x310
[ 9057.647773] down_read_nested+0x4b/0x140
[ 9057.648350] __btrfs_tree_read_lock+0x24/0x110 [btrfs]
[ 9057.649175] btrfs_read_lock_root_node+0x31/0x40 [btrfs]
[ 9057.650010] btrfs_search_slot+0x537/0xc00 [btrfs]
[ 9057.650849] scrub_print_warning_inode+0x89/0x370 [btrfs]
[ 9057.651733] iterate_extent_inodes+0x1e3/0x280 [btrfs]
[ 9057.652501] scrub_print_warning+0x15d/0x2f0 [btrfs]
[ 9057.653264] scrub_handle_errored_block.isra.0+0x135f/0x1640 [btrfs]
[ 9057.654295] scrub_bio_end_io_worker+0x101/0x2e0 [btrfs]
[ 9057.655111] btrfs_work_helper+0xf8/0x400 [btrfs]
[ 9057.655831] process_one_work+0x247/0x5a0
[ 9057.656425] worker_thread+0x55/0x3c0
[ 9057.656993] kthread+0x155/0x180
[ 9057.657494] ret_from_fork+0x22/0x30
[ 9057.658030]
other info that might help us debug this:
[ 9057.659064] Possible unsafe locking scenario:
[ 9057.659824] CPU0 CPU1
[ 9057.660402] ---- ----
[ 9057.660988] lock(&fs_info->commit_root_sem);
[ 9057.661581] lock(btrfs-tree-00);
[ 9057.662348] lock(&fs_info->commit_root_sem);
[ 9057.663254] lock(btrfs-tree-00);
[ 9057.663690]
*** DEADLOCK ***
[ 9057.664437] 4 locks held by kworker/u16:4/30781:
[ 9057.665023] #0: ffff8e25922a1148 ((wq_completion)btrfs-scrub){+.+.}-{0:0}, at: process_one_work+0x1c7/0x5a0
[ 9057.666260] #1: ffffabb3451ffe70 ((work_completion)(&work->normal_work)){+.+.}-{0:0}, at: process_one_work+0x1c7/0x5a0
[ 9057.667639] #2: ffff8e25922da198 (&ret->mutex){+.+.}-{3:3}, at: scrub_handle_errored_block.isra.0+0x5d2/0x1640 [btrfs]
[ 9057.669017] #3: ffff8e25582d4b70 (&fs_info->commit_root_sem){++++}-{3:3}, at: iterate_extent_inodes+0x10b/0x280 [btrfs]
[ 9057.670408]
stack backtrace:
[ 9057.670976] CPU: 7 PID: 30781 Comm: kworker/u16:4 Not tainted 5.14.0-rc2-btrfs-next-93 #1
[ 9057.672030] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g155821a1990b-prebuilt.qemu.org 04/01/2014
[ 9057.673492] Workqueue: btrfs-scrub btrfs_work_helper [btrfs]
[ 9057.674258] Call Trace:
[ 9057.674588] dump_stack_lvl+0x57/0x72
[ 9057.675083] check_noncircular+0xf3/0x110
[ 9057.675611] __lock_acquire+0x130e/0x2210
[ 9057.676132] lock_acquire+0xd7/0x310
[ 9057.676605] ? __btrfs_tree_read_lock+0x24/0x110 [btrfs]
[ 9057.677313] ? lock_is_held_type+0xe8/0x140
[ 9057.677849] down_read_nested+0x4b/0x140
[ 9057.678349] ? __btrfs_tree_read_lock+0x24/0x110 [btrfs]
[ 9057.679068] __btrfs_tree_read_lock+0x24/0x110 [btrfs]
[ 9057.679760] btrfs_read_lock_root_node+0x31/0x40 [btrfs]
[ 9057.680458] btrfs_search_slot+0x537/0xc00 [btrfs]
[ 9057.681083] ? _raw_spin_unlock+0x29/0x40
[ 9057.681594] ? btrfs_find_all_roots_safe+0x11f/0x140 [btrfs]
[ 9057.682336] scrub_print_warning_inode+0x89/0x370 [btrfs]
[ 9057.683058] ? btrfs_find_all_roots_safe+0x11f/0x140 [btrfs]
[ 9057.683834] ? scrub_write_block_to_dev_replace+0xb0/0xb0 [btrfs]
[ 9057.684632] iterate_extent_inodes+0x1e3/0x280 [btrfs]
[ 9057.685316] scrub_print_warning+0x15d/0x2f0 [btrfs]
[ 9057.685977] ? ___ratelimit+0xa4/0x110
[ 9057.686460] scrub_handle_errored_block.isra.0+0x135f/0x1640 [btrfs]
[ 9057.687316] scrub_bio_end_io_worker+0x101/0x2e0 [btrfs]
[ 9057.688021] btrfs_work_helper+0xf8/0x400 [btrfs]
[ 9057.688649] ? lock_is_held_type+0xe8/0x140
[ 9057.689180] process_one_work+0x247/0x5a0
[ 9057.689696] worker_thread+0x55/0x3c0
[ 9057.690175] ? process_one_work+0x5a0/0x5a0
[ 9057.690731] kthread+0x155/0x180
[ 9057.691158] ? set_kthread_struct+0x40/0x40
[ 9057.691697] ret_from_fork+0x22/0x30
Fix this by making btrfs_find_all_roots() never attempt to lock the
commit_root_sem when it is called from btrfs_qgroup_trace_extent_post().
We can't just pass a non-NULL transaction handle to btrfs_find_all_roots()
from btrfs_qgroup_trace_extent_post(), because that would make backref
lookup not use commit roots and acquire read locks on extent buffers, and
therefore could deadlock when btrfs_qgroup_trace_extent_post() is called
from the btrfs_truncate_inode_items() code path which has acquired a write
lock on an extent buffer of the subvolume btree.
CC: stable@vger.kernel.org # 4.19+
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
A weird KASAN problem that Zygo reported could have been easily caught
if we checked for basic things in our backref freeing code. We have two
methods of freeing a backref node
- btrfs_backref_free_node: this just is kfree() essentially.
- btrfs_backref_drop_node: this actually unlinks the node and cleans up
everything and then calls btrfs_backref_free_node().
We should mostly be using btrfs_backref_drop_node(), to make sure the
node is properly unlinked from the backref cache, and only use
btrfs_backref_free_node() when we know the node isn't actually linked to
the backref cache. We made a mistake here and thus got the KASAN splat.
Make this style of issue easier to find by adding some ASSERT()'s to
btrfs_backref_free_node() and adjusting our deletion stuff to properly
init the list so we can rely on list_empty() checks working properly.
BUG: KASAN: use-after-free in btrfs_backref_cleanup_node+0x18a/0x420
Read of size 8 at addr ffff888112402950 by task btrfs/28836
CPU: 0 PID: 28836 Comm: btrfs Tainted: G W 5.10.0-e35f27394290-for-next+ #23
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.12.0-1 04/01/2014
Call Trace:
dump_stack+0xbc/0xf9
? btrfs_backref_cleanup_node+0x18a/0x420
print_address_description.constprop.8+0x21/0x210
? record_print_text.cold.34+0x11/0x11
? btrfs_backref_cleanup_node+0x18a/0x420
? btrfs_backref_cleanup_node+0x18a/0x420
kasan_report.cold.10+0x20/0x37
? btrfs_backref_cleanup_node+0x18a/0x420
__asan_load8+0x69/0x90
btrfs_backref_cleanup_node+0x18a/0x420
btrfs_backref_release_cache+0x83/0x1b0
relocate_block_group+0x394/0x780
? merge_reloc_roots+0x4a0/0x4a0
btrfs_relocate_block_group+0x26e/0x4c0
btrfs_relocate_chunk+0x52/0x120
btrfs_balance+0xe2e/0x1900
? check_flags.part.50+0x6c/0x1e0
? btrfs_relocate_chunk+0x120/0x120
? kmem_cache_alloc_trace+0xa06/0xcb0
? _copy_from_user+0x83/0xc0
btrfs_ioctl_balance+0x3a7/0x460
btrfs_ioctl+0x24c8/0x4360
? __kasan_check_read+0x11/0x20
? check_chain_key+0x1f4/0x2f0
? __asan_loadN+0xf/0x20
? btrfs_ioctl_get_supported_features+0x30/0x30
? kvm_sched_clock_read+0x18/0x30
? check_chain_key+0x1f4/0x2f0
? lock_downgrade+0x3f0/0x3f0
? handle_mm_fault+0xad6/0x2150
? do_vfs_ioctl+0xfc/0x9d0
? ioctl_file_clone+0xe0/0xe0
? check_flags.part.50+0x6c/0x1e0
? check_flags.part.50+0x6c/0x1e0
? check_flags+0x26/0x30
? lock_is_held_type+0xc3/0xf0
? syscall_enter_from_user_mode+0x1b/0x60
? do_syscall_64+0x13/0x80
? rcu_read_lock_sched_held+0xa1/0xd0
? __kasan_check_read+0x11/0x20
? __fget_light+0xae/0x110
__x64_sys_ioctl+0xc3/0x100
do_syscall_64+0x37/0x80
entry_SYSCALL_64_after_hwframe+0x44/0xa9
RIP: 0033:0x7f4c4bdfe427
RSP: 002b:00007fff33ee6df8 EFLAGS: 00000202 ORIG_RAX: 0000000000000010
RAX: ffffffffffffffda RBX: 00007fff33ee6e98 RCX: 00007f4c4bdfe427
RDX: 00007fff33ee6e98 RSI: 00000000c4009420 RDI: 0000000000000003
RBP: 0000000000000003 R08: 0000000000000003 R09: 0000000000000078
R10: fffffffffffff59d R11: 0000000000000202 R12: 0000000000000001
R13: 0000000000000000 R14: 00007fff33ee8a34 R15: 0000000000000001
Allocated by task 28836:
kasan_save_stack+0x21/0x50
__kasan_kmalloc.constprop.18+0xbe/0xd0
kasan_kmalloc+0x9/0x10
kmem_cache_alloc_trace+0x410/0xcb0
btrfs_backref_alloc_node+0x46/0xf0
btrfs_backref_add_tree_node+0x60d/0x11d0
build_backref_tree+0xc5/0x700
relocate_tree_blocks+0x2be/0xb90
relocate_block_group+0x2eb/0x780
btrfs_relocate_block_group+0x26e/0x4c0
btrfs_relocate_chunk+0x52/0x120
btrfs_balance+0xe2e/0x1900
btrfs_ioctl_balance+0x3a7/0x460
btrfs_ioctl+0x24c8/0x4360
__x64_sys_ioctl+0xc3/0x100
do_syscall_64+0x37/0x80
entry_SYSCALL_64_after_hwframe+0x44/0xa9
Freed by task 28836:
kasan_save_stack+0x21/0x50
kasan_set_track+0x20/0x30
kasan_set_free_info+0x1f/0x30
__kasan_slab_free+0xf3/0x140
kasan_slab_free+0xe/0x10
kfree+0xde/0x200
btrfs_backref_error_cleanup+0x452/0x530
build_backref_tree+0x1a5/0x700
relocate_tree_blocks+0x2be/0xb90
relocate_block_group+0x2eb/0x780
btrfs_relocate_block_group+0x26e/0x4c0
btrfs_relocate_chunk+0x52/0x120
btrfs_balance+0xe2e/0x1900
btrfs_ioctl_balance+0x3a7/0x460
btrfs_ioctl+0x24c8/0x4360
__x64_sys_ioctl+0xc3/0x100
do_syscall_64+0x37/0x80
entry_SYSCALL_64_after_hwframe+0x44/0xa9
The buggy address belongs to the object at ffff888112402900
which belongs to the cache kmalloc-128 of size 128
The buggy address is located 80 bytes inside of
128-byte region [ffff888112402900, ffff888112402980)
The buggy address belongs to the page:
page:0000000028b1cd08 refcount:1 mapcount:0 mapping:0000000000000000 index:0xffff888131c810c0 pfn:0x112402
flags: 0x17ffe0000000200(slab)
raw: 017ffe0000000200 ffffea000424f308 ffffea0007d572c8 ffff888100040440
raw: ffff888131c810c0 ffff888112402000 0000000100000009 0000000000000000
page dumped because: kasan: bad access detected
Memory state around the buggy address:
ffff888112402800: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
ffff888112402880: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
>ffff888112402900: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
^
ffff888112402980: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
ffff888112402a00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
Link: https://lore.kernel.org/linux-btrfs/20201208194607.GI31381@hungrycats.org/
CC: stable@vger.kernel.org # 5.10+
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
The name BTRFS_ROOT_REF_COWS is not very clear about the meaning.
In fact, that bit can only be set to those trees:
- Subvolume roots
- Data reloc root
- Reloc roots for above roots
All other trees won't get this bit set. So just by the result, it is
obvious that, roots with this bit set can have tree blocks shared with
other trees. Either shared by snapshots, or by reloc roots (an special
snapshot created by relocation).
This patch will rename BTRFS_ROOT_REF_COWS to BTRFS_ROOT_SHAREABLE to
make it easier to understand, and update all comment mentioning
"reference counted" to follow the rename.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
The error cleanup will be extracted as a new function,
btrfs_backref_error_cleanup(), and moved to backref.c and exported for
later usage.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
This the the 2nd major part of generic backref cache. Move it to
backref.c so we can reuse it.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
This function is the major part of backref cache build process, move it
to backref.c so we can reuse it later.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Also change the parameter, since all callers can easily grab an fs_info,
there is no need for all the pointer chasing.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Since we're releasing all existing nodes/edges, other than cleanup the
mess after error, "release" is a more proper naming here.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Also add comment explaining the cleanup progress, to differ it from
btrfs_backref_drop_node().
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
With extra comment for drop_backref_node() as it has some similarity
with remove_backref_node(), thus we need extra comment explaining the
difference.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Structure tree_entry provides a very simple rb_tree which only uses
bytenr as search index.
That tree_entry is used in 3 structures: backref_node, mapping_node and
tree_block.
Since we're going to make backref_node independnt from relocation, it's
a good time to extract the tree_entry into rb_simple_node, and export it
into misc.h.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
These 3 structures are the main part of btrfs backref cache, move them
to backref.h to build the basis for later reuse.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
This function will go to the next inline/keyed backref for
btrfs_backref_iter infrastructure.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Due to the complex nature of btrfs extent tree, when we want to iterate
all backrefs of one extent, this involves quite a lot of work, like
searching the EXTENT_ITEM/METADATA_ITEM, iteration through inline and keyed
backrefs.
Normally this would result in a complex code, something like:
btrfs_search_slot()
/* Ensure we are at EXTENT_ITEM/METADATA_ITEM */
while (1) { /* Loop for extent tree items */
while (ptr < end) { /* Loop for inlined items */
/* Real work here */
}
next:
ret = btrfs_next_item()
/* Ensure we're still at keyed item for specified bytenr */
}
The idea of btrfs_backref_iter is to avoid such complex and hard to
read code structure, but something like the following:
iter = btrfs_backref_iter_alloc();
ret = btrfs_backref_iter_start(iter, bytenr);
if (ret < 0)
goto out;
for (; ; ret = btrfs_backref_iter_next(iter)) {
/* Real work here */
}
out:
btrfs_backref_iter_free(iter);
This patch is just the skeleton + btrfs_backref_iter_start() code.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
tree leaves
In relocation, we need to locate all parent tree leaves referring to one
data extent, thus we have a complex mechanism to iterate throught extent
tree and subvolume trees to locate the related leaves.
However this is already done in backref.c, we have
btrfs_find_all_leafs(), which can return a ulist containing all leaves
referring to that data extent.
Use btrfs_find_all_leafs() to replace find_data_references().
There is a special handling for v1 space cache data extents, where we
need to delete the v1 space cache data extents, to avoid those data
extents to hang the data relocation.
In this patch, the special handling is done by re-iterating the root
tree leaf. Although it's a little less efficient than the old handling,
considering we can reuse a lot of code, it should be acceptable.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|