| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
rmw_workers doesn't need ordered execution or thread disabling threshold
(as the thresh parameter is less than DFT_THRESHOLD).
Just switch to the normal workqueues that use a lot less resources,
especially in the work_struct vs btrfs_work structures.
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Now the btrfs RAID56 infrastructure has migrated to use sector_ptr
interface, it should be safe to enable subpage support for RAID56.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
The non-compatible part is only the bitmap iteration part, now the
bitmap size is extended to rbio::stripe_nsectors, not the old
rbio::stripe_npages.
Since we're here, also slightly improve the function by:
- Rename @i to @stripe
- Rename @bit to @sectornr
- Move @page and @index into the inner loop
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Function steal_rbio() will take all the uptodate pages from the source
rbio to destination rbio.
With the new stripe_sectors[] array, we also need to do the extra check:
- Check sector::flags to make sure the full page is uptodate
Now we don't use PageUptodate flag for subpage cases to indicate
if the page is uptodate.
Instead we need to check all the sectors belong to the page to be sure
about whether it's full page uptodate.
So here we introduce a new helper, full_page_sectors_uptodate() to do
the check.
- Update rbio::stripe_sectors[] to use the new page pointer
We only need to change the page pointer, no need to change anything
else.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Unlike previous code, we can not directly set PageUptodate for stripe
pages now. Instead we have to iterate through all the sectors and set
SECTOR_UPTODATE flag there.
Introduce a new helper find_stripe_sector(), to do the work.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
The functionality is completely replaced by the new bio_sectors member,
now it's time to remove the old member.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
This requires one extra parameter @pgoff for the function.
In the current code base, scrub is still one page per sector, thus the
new parameter will always be 0.
It needs the extra subpage scrub optimization code to fully take
advantage.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
There is only one caller for that helper now, and we're definitely fine
to open-code it.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
With this function converted to subpage compatible sector interfaces,
the following helper functions can be removed:
- rbio_stripe_page()
- rbio_pstripe_page()
- rbio_qstripe_page()
- page_in_rbio()
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
This involves:
- Use sector_ptr interface to grab the pointers
- Add sector->pgoff to pointers[]
- Rebuild data using sectorsize instead of PAGE_SIZE
- Use memcpy() to replace copy_page()
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
The core is to convert direct page usage into sector_ptr usage, and
use memcpy() to replace copy_page().
For pointers usage, we need to convert it to kmap_local_page() +
sector->pgoff.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Make rbio_add_io_page() subpage compatible, which involves:
- Rename rbio_add_io_page() to rbio_add_io_sector()
Although we still rely on PAGE_SIZE == sectorsize, so add a new
ASSERT() inside rbio_add_io_sector() to make sure all pgoff is 0.
- Introduce rbio_stripe_sector() helper
The equivalent of rbio_stripe_page().
This new helper has extra ASSERT()s to validate the stripe and sector
number.
- Introduce sector_in_rbio() helper
The equivalent of page_in_rbio().
- Rename @pagenr variables to @sectornr
- Use rbio::stripe_nsectors when iterating the bitmap
Please note that, this only changes the interface, the bios are still
using full page for IO.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
This new member is going to fully replace bio_pages in the future, but
for now let's keep them co-exist, until the full switch is done.
Currently cache_rbio_pages() and index_rbio_pages() will also populate
the new array.
And cache_rbio_pages() need to record which sectors are uptodate, so we
also need to introduce sector_ptr::uptodate bit.
To avoid extra memory usage, we let the new @uptodate bit to share bits
with @pgoff. Now pgoff only has at most 31 bits, which is already more
than enough, as even for 256K page size, we only need 18 bits.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
The new member is an array of sector_ptr pointers, they will represent
all sectors inside a full stripe (including P/Q).
They co-operate with btrfs_raid_bio::stripe_pages:
stripe_pages: | Page 0, range [0, 64K) | Page 1 ...
stripe_sectors: | | | ... | |
| | \- sector 15, page 0, pgoff=60K
| \- sector 1, page 0, pgoff=4K
\---- sector 0, page 0, pfoff=0
With such structure, we can represent subpage sectors without using
extra pages.
Here we introduce a new helper, index_stripe_sectors(), to update
stripe_sectors[] to point to correct page and pgoff.
So every time rbio::stripe_pages[] pointer gets updated, the new helper
should be called.
The following functions have to call the new helper:
- steal_rbio()
- alloc_rbio_pages()
- alloc_rbio_parity_pages()
- alloc_rbio_essential_pages()
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
The new members are all related to number of sectors, but the existing
number of pages members are kept as is:
- nr_sectors
Total sectors of the full stripe including P/Q.
- stripe_nsectors
The sectors of a single stripe.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
There are a lot of members using much larger type in btrfs_raid_bio than
necessary, like nr_pages which represents the total number of a full
stripe.
Instead of int (which is at least 32bits), u16 is already enough
(max stripe length will be 256MiB, already beyond current RAID56 device
number limit).
So this patch will reduce the width of the following members:
- stripe_len to u32
- nr_pages to u16
- nr_data to u8
- real_stripes to u8
- scrubp to u8
- faila/b to s8
As -1 is used to indicate no corruption
This will slightly reduce the size of btrfs_raid_bio from 272 bytes to
256 bytes, reducing 16 bytes usage.
But please note that, when using btrfs_raid_bio, we allocate extra space
for it to cover various pointer array, so the reduce memory is not
really a big saving overall.
As we're here modifying the comments already, update existing comments
to current code standard.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
The function rbio_nr_pages() is only called once inside alloc_rbio(),
there is no reason to make it dedicated helper.
Furthermore, the return type doesn't match, the function return "unsigned
long" which may not be necessary, while the only caller only uses "int".
Since we're doing cleaning up here, also fix the type to "const unsigned
int" for all involved local variables.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Currently btrfs uses fixed stripe length (64K), thus u32 is wide enough
for the usage.
Furthermore, even in the future we choose to enlarge stripe length to
larger values, I don't believe we would want stripe as large as 4G or
larger.
So this patch will reduce the width for all in-memory structures and
parameters, this involves:
- RAID56 related function argument lists
This allows us to do direct division related to stripe_len.
Although we will use bits shift to replace the division anyway.
- btrfs_io_geometry structure
This involves one change to simplify the calculation of both @stripe_nr
and @stripe_offset, using div64_u64_rem().
And add extra sanity check to make sure @stripe_offset is always small
enough for u32.
This saves 8 bytes for the structure.
- map_lookup structure
This convert @stripe_len to u32, which saves 8 bytes. (saved 4 bytes,
and removed a 4-bytes hole)
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
The bios added to ->bio_list are the original bios fed into
btrfs_map_bio, which are never advanced. Just use the iter in the
bio itself.
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Except for the spurious initialization of ->device just after allocation
nothing uses the btrfs_bio, so just allocate a normal bio without extra
data.
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Prepare for further refactoring by moving this initialization to a
single place instead of setting it in the callers.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Several functions currently populate an array of page pointers one
allocated page at a time. Factor out the common code so as to allow
improvements to all of the sites at once.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Sweet Tea Dorminy <sweettea-kernel@dorminy.me>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
We can grab fs_info reliably from btrfs_raid_bio::bioc, as the bioc is
always passed into alloc_rbio(), and only get released when the raid bio
is released.
Remove btrfs_raid_bio::fs_info member, and cleanup all the @fs_info
parameters for alloc_rbio() callers.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Previously we had "struct btrfs_bio", which records IO context for
mirrored IO and RAID56, and "strcut btrfs_io_bio", which records extra
btrfs specific info for logical bytenr bio.
With "btrfs_bio" renamed to "btrfs_io_context", we are safe to rename
"btrfs_io_bio" to "btrfs_bio" which is a more suitable name now.
The struct btrfs_bio changes meaning by this commit. There was a
suggested name like btrfs_logical_bio but it's a bit long and we'd
prefer to use a shorter name.
This could be a concern for backports to older kernels where the
different meaning could possibly cause confusion or bugs. Comparing the
new and old structures, there's no overlap among the struct members so a
build would break in case of incorrect backport.
We haven't had many backports to bio code anyway so this is more of a
theoretical cause of bugs and a matter of precaution but we'll need to
keep the semantic change in mind.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
The structure btrfs_bio is used by two different sites:
- bio->bi_private for mirror based profiles
For those profiles (SINGLE/DUP/RAID1*/RAID10), this structures records
how many mirrors are still pending, and save the original endio
function of the bio.
- RAID56 code
In that case, RAID56 only utilize the stripes info, and no long uses
that to trace the pending mirrors.
So btrfs_bio is not always bind to a bio, and contains more info for IO
context, thus renaming it will make the naming less confusing.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Comparators just read the data and thus get const parameters. This
should be also preserved by the local variables, update all comparators
passed to sort or bsearch.
Cleanups:
- unnecessary casts are dropped
- btrfs_cmp_device_free_bytes is cleaned up to follow the common pattern
and 'inline' is dropped as the function address is taken
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
The highmem flag is used for allocating pages for compression and for
raid56 pages. The high memory makes sense on 32bit systems but is not
without problems. On 64bit system's it's just another layer of wrappers.
The time the pages are allocated for compression or raid56 is relatively
short (about a transaction commit), so the pages are not blocked
indefinitely. As the number of pages depends on the amount of data being
written/read, there's a theoretical problem. A fast device on a 32bit
system could use most of the low memory pool, while with the highmem
allocation that would not happen. This was possibly the original idea
long time ago, but nowadays we optimize for 64bit systems.
This patch removes all usage of the __GFP_HIGHMEM flag for page
allocation, the kmap/kunmap are still in place and will be removed in
followup patches. Remaining is masking out the bit in
alloc_extent_state and __lookup_free_space_inode, that can safely stay.
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull CFI on arm64 support from Kees Cook:
"This builds on last cycle's LTO work, and allows the arm64 kernels to
be built with Clang's Control Flow Integrity feature. This feature has
happily lived in Android kernels for almost 3 years[1], so I'm excited
to have it ready for upstream.
The wide diffstat is mainly due to the treewide fixing of mismatched
list_sort prototypes. Other things in core kernel are to address
various CFI corner cases. The largest code portion is the CFI runtime
implementation itself (which will be shared by all architectures
implementing support for CFI). The arm64 pieces are Acked by arm64
maintainers rather than coming through the arm64 tree since carrying
this tree over there was going to be awkward.
CFI support for x86 is still under development, but is pretty close.
There are a handful of corner cases on x86 that need some improvements
to Clang and objtool, but otherwise works well.
Summary:
- Clean up list_sort prototypes (Sami Tolvanen)
- Introduce CONFIG_CFI_CLANG for arm64 (Sami Tolvanen)"
* tag 'cfi-v5.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
arm64: allow CONFIG_CFI_CLANG to be selected
KVM: arm64: Disable CFI for nVHE
arm64: ftrace: use function_nocfi for ftrace_call
arm64: add __nocfi to __apply_alternatives
arm64: add __nocfi to functions that jump to a physical address
arm64: use function_nocfi with __pa_symbol
arm64: implement function_nocfi
psci: use function_nocfi for cpu_resume
lkdtm: use function_nocfi
treewide: Change list_sort to use const pointers
bpf: disable CFI in dispatcher functions
kallsyms: strip ThinLTO hashes from static functions
kthread: use WARN_ON_FUNCTION_MISMATCH
workqueue: use WARN_ON_FUNCTION_MISMATCH
module: ensure __cfi_check alignment
mm: add generic function_nocfi macro
cfi: add __cficanonical
add support for Clang CFI
|
|
These kmaps are thread local and don't need to be atomic. So they can use
the more efficient kmap_local_page(). However, the mapping of pages in
the stripes and the additional parity and qstripe pages are a bit
trickier because the unmapping must occur in the opposite order from the
mapping. Furthermore, the pointer array in __raid_recover_end_io() may
get reordered.
Convert these calls to kmap_local_page() taking care to reverse the
unmappings of any page arrays as well as being careful with the mappings
of any special pages such as the parity and qstripe pages.
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Use a simple coccinelle script to help convert the most common
kmap()/kunmap() patterns to kmap_local_page()/kunmap_local().
Note that some kmaps which were caught by this script needed to be
handled by hand because of the strict unmapping order of kunmap_local()
so they are not included in this patch. But this script got us started.
There's another temp variable added for the final length write to the
first page so it does not interfere with cpage_out that is used for
mapping other pages.
The development of this patch was aided by the follow script:
// <smpl>
// SPDX-License-Identifier: GPL-2.0-only
// Find kmap and replace with kmap_local_page then mark kunmap
//
// Confidence: Low
// Copyright: (C) 2021 Intel Corporation
// URL: http://coccinelle.lip6.fr/
@ catch_all @
expression e, e2;
@@
(
-kmap(e)
+kmap_local_page(e)
)
...
(
-kunmap(...)
+kunmap_local()
)
// </smpl>
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
The in_range() macro is defined twice in btrfs' source, once in ctree.h
and once in misc.h.
Remove the definition in ctree.h and include misc.h in the files depending
on it.
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
list_sort() internally casts the comparison function passed to it
to a different type with constant struct list_head pointers, and
uses this pointer to call the functions, which trips indirect call
Control-Flow Integrity (CFI) checking.
Instead of removing the consts, this change defines the
list_cmp_func_t type and changes the comparison function types of
all list_sort() callers to use const pointers, thus avoiding type
mismatches.
Suggested-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Kees Cook <keescook@chromium.org>
Tested-by: Nick Desaulniers <ndesaulniers@google.com>
Tested-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20210408182843.1754385-10-samitolvanen@google.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull kmap conversion updates from David Sterba:
"This contains changes regarding kmap API use and eg conversion from
kmap_atomic to kmap_local_page.
The API belongs to memory management but to save cross-tree
dependency headaches we've agreed to take it through the btrfs tree
because there are some trivial conversions possible, while the rest
will need some time and getting the easy cases out of the way would be
convenient.
The changes can be grouped:
- function exports, new helpers
- new VM_BUG_ON for additional verification; it's been discussed if
it should be VM_BUG_ON or BUG_ON, the former was chosen due to
performance reasons
- code replaced by relevant helpers"
[ This is an updated version of a request that originally came in during
the merge window, but I asked for some updates:
https://lore.kernel.org/lkml/cover.1614090658.git.dsterba@suse.com/
which is why this got merge after the merge window closed. - Linus ]
* 'kmap-conversion-for-5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: use copy_highpage() instead of 2 kmaps()
btrfs: use memcpy_[to|from]_page() and kmap_local_page()
mm/highmem: Add VM_BUG_ON() to mem*_page() calls
mm/highmem: Introduce memcpy_page(), memmove_page(), and memset_page()
mm/highmem: Convert memcpy_[to|from]_page() to kmap_local_page()
mm/highmem: Lift memcpy_[to|from]_page to core
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
"This is the first batch of fixes that usually arrive during the merge
window code freeze. Regressions and stable material.
Regressions:
- fix deadlock in log sync in zoned mode
- fix bugs in subpage mode still wrongly assuming sectorsize == page
size
Fixes:
- fix missing kunmap of the Q stripe in RAID6
- block group fixes:
- fix race between extent freeing/allocation when using bitmaps
- avoid double put of block group when emptying cluster
- swapfile fixes:
- fix swapfile writes vs running scrub
- fix swapfile activation vs snapshot creation
- fix stale data exposure after cloning a hole with NO_HOLES enabled
- remove tree-checker check that does not work in case information
from other leaves is necessary"
* tag 'for-5.12-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: zoned: fix deadlock on log sync
btrfs: avoid double put of block group when emptying cluster
btrfs: fix stale data exposure after cloning a hole with NO_HOLES enabled
btrfs: tree-checker: do not error out if extent ref hash doesn't match
btrfs: fix race between swap file activation and snapshot creation
btrfs: fix race between writes to swap files and scrub
btrfs: avoid checking for RO block group twice during nocow writeback
btrfs: fix race between extent freeing/allocation when using bitmaps
btrfs: make check_compressed_csum() to be subpage compatible
btrfs: make btrfs_submit_compressed_read() subpage compatible
btrfs: fix raid6 qstripe kmap
|
|
There are many places where kmap/memove/kunmap patterns occur.
This pattern exists in the core common function copy_highpage().
Use copy_highpage to avoid open coding the use of kmap and leverages the
core functions use of kmap_local_page().
Development of this patch was aided by the following coccinelle script:
// <smpl>
// SPDX-License-Identifier: GPL-2.0-only
// Find kmap/copypage/kunmap pattern and replace with copy_highpage calls
//
// NOTE: The expressions in the copy page version of this kmap pattern are
// overly complex and so these all need individual attention.
//
// Confidence: Low
// Copyright: (C) 2021 Intel Corporation
// URL: http://coccinelle.lip6.fr/
// Comments:
// Options:
//
// Then a copy_page where we have 2 pages involved.
//
@ copy_page_rule @
expression page, page2, To, From, Size;
identifier ptr, ptr2;
type VP, VP2;
@@
/* kmap */
(
-VP ptr = kmap(page);
...
-VP2 ptr2 = kmap(page2);
|
-VP ptr = kmap_atomic(page);
...
-VP2 ptr2 = kmap_atomic(page2);
|
-ptr = kmap(page);
...
-ptr2 = kmap(page2);
|
-ptr = kmap_atomic(page);
...
-ptr2 = kmap_atomic(page2);
)
// 1 or more copy versions of the entire page
<+...
(
-copy_page(To, From);
+copy_highpage(To, From);
|
-memmove(To, From, Size);
+memmoveExtra(To, From, Size);
)
...+>
/* kunmap */
(
-kunmap(page2);
...
-kunmap(page);
|
-kunmap(page);
...
-kunmap(page2);
|
-kmap_atomic(ptr2);
...
-kmap_atomic(ptr);
)
// Remove any pointers left unused
@
depends on copy_page_rule
@
identifier copy_page_rule.ptr;
identifier copy_page_rule.ptr2;
type VP, VP1;
type VP2, VP21;
@@
-VP ptr;
... when != ptr;
? VP1 ptr;
-VP2 ptr2;
... when != ptr2;
? VP21 ptr2;
// </smpl>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
When a qstripe is required an extra page is allocated and mapped. There
were 3 problems:
1) There is no corresponding call of kunmap() for the qstripe page.
2) There is no reason to map the qstripe page more than once if the
number of bits set in rbio->dbitmap is greater than one.
3) There is no reason to map the parity page and unmap it each time
through the loop.
The page memory can continue to be reused with a single mapping on each
iteration by raid6_call.gen_syndrome() without remapping. So map the
page for the duration of the loop.
Similarly, improve the algorithm by mapping the parity page just 1 time.
Fixes: 5a6ac9eacb49 ("Btrfs, raid56: support parity scrub on raid56")
CC: stable@vger.kernel.org # 4.4.x: c17af96554a8: btrfs: raid56: simplify tracking of Q stripe presence
CC: stable@vger.kernel.org # 4.4.x
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Pull core block updates from Jens Axboe:
"Another nice round of removing more code than what is added, mostly
due to Christoph's relentless pursuit of tech debt removal/cleanups.
This pull request contains:
- Two series of BFQ improvements (Paolo, Jan, Jia)
- Block iov_iter improvements (Pavel)
- bsg error path fix (Pan)
- blk-mq scheduler improvements (Jan)
- -EBUSY discard fix (Jan)
- bvec allocation improvements (Ming, Christoph)
- bio allocation and init improvements (Christoph)
- Store bdev pointer in bio instead of gendisk + partno (Christoph)
- Block trace point cleanups (Christoph)
- hard read-only vs read-only split (Christoph)
- Block based swap cleanups (Christoph)
- Zoned write granularity support (Damien)
- Various fixes/tweaks (Chunguang, Guoqing, Lei, Lukas, Huhai)"
* tag 'for-5.12/block-2021-02-17' of git://git.kernel.dk/linux-block: (104 commits)
mm: simplify swapdev_block
sd_zbc: clear zone resources for non-zoned case
block: introduce blk_queue_clear_zone_settings()
zonefs: use zone write granularity as block size
block: introduce zone_write_granularity limit
block: use blk_queue_set_zoned in add_partition()
nullb: use blk_queue_set_zoned() to setup zoned devices
nvme: cleanup zone information initialization
block: document zone_append_max_bytes attribute
block: use bi_max_vecs to find the bvec pool
md/raid10: remove dead code in reshape_request
block: mark the bio as cloned in bio_iov_bvec_set
block: set BIO_NO_PAGE_REF in bio_iov_bvec_set
block: remove a layer of indentation in bio_iov_iter_get_pages
block: turn the nr_iovecs argument to bio_alloc* into an unsigned short
block: remove the 1 and 4 vec bvec_slabs entries
block: streamline bvec_alloc
block: factor out a bvec_alloc_gfp helper
block: move struct biovec_slab to bio.c
block: reuse BIO_INLINE_VECS for integrity bvecs
...
|
|
Fix below warnings reported by coccicheck:
./fs/btrfs/raid56.c:237:2-8: WARNING: NULL check before some freeing
functions is not needed.
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Yang Li <abaci-bugfix@linux.alibaba.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Replace the gendisk pointer in struct bio with a pointer to the newly
improved struct block device. From that the gendisk can be trivially
accessed with an extra indirection, but it also allows to directly
look up all information related to partition remapping.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Since commit 72deb455b5ec ("block: remove CONFIG_LBDAF") (5.2) the
sector_t type is u64 on all arches and configs so we don't need to
typecast it. It used to be unsigned long and the result of sector size
shifts were not guaranteed to fit in the type.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
There's no cleanup that occurs so we can simply return 0 directly.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
While at it use the opportunity to simplify find_logical_bio_stripe by
reducing the scope of 'stripe_start' variable and squash the
sector-to-bytes conversion on one line.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Unify the style in the file such that return value of bio_list_pop is
assigned directly in the while loop. This is in line with the rest of
the kernel.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
The merging logic is always executed if the current stripe's device
is not missing. So there's no point in duplicating the check. Simply
remove it, while at it reduce the scope of the 'last_end' variable.
If the current stripe's device is missing we fail the stripe early on.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Instead of recording stripe_index and using that to access correct
btrfs_device from btrfs_bio::stripes record the btrfs_device in
btrfs_io_bio. This will enable endio handlers to increment device
error counters on checksum errors.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
The struct_size macro does the same calculation and is safe regarding
overflows. Though we're not expecting them to happen, use the helper for
clarity.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
There are temporary variables tracking the index of P and Q stripes, but
none of them is really used as such, merely for determining if the Q
stripe is present. This leads to compiler warnings with
-Wunused-but-set-variable and has been reported several times.
fs/btrfs/raid56.c: In function ‘finish_rmw’:
fs/btrfs/raid56.c:1199:6: warning: variable ‘p_stripe’ set but not used [-Wunused-but-set-variable]
1199 | int p_stripe = -1;
| ^~~~~~~~
fs/btrfs/raid56.c: In function ‘finish_parity_scrub’:
fs/btrfs/raid56.c:2356:6: warning: variable ‘p_stripe’ set but not used [-Wunused-but-set-variable]
2356 | int p_stripe = -1;
| ^~~~~~~~
Replace the two variables with one that has a clear meaning and also get
rid of the warnings. The logic that verifies that there are only 2
valid cases is unchanged.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
In lock_stripe_add() we're caching the bucket for the stripe hash table
just for a single call to dereference the stripe hash.
If we just directly call rbio_bucket() we can safe the pointless local
variable.
Also move the dereferencing of the stripe hash outside of the variable
declaration block to not break over the 80 characters limit.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
In lock_stripe_add() we're traversing the stripe hash list and check if
the current list element's raid_map equals is equal to the raid bio's
raid_map. If both are equal we continue processing.
If we'd check for inequality instead of equality we can reduce one level
of indentation.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
