| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Pull cifs updates from Steve French:
"22 changesets, 2 for stable.
Includes big performance improvement for large i/o when using
multichannel, also includes DFS fixes"
* tag '5.8-rc-smb3-fixes-part-1' of git://git.samba.org/sfrench/cifs-2.6: (22 commits)
cifs: update internal module version number
cifs: multichannel: try to rebind when reconnecting a channel
cifs: multichannel: use pointer for binding channel
smb3: remove static checker warning
cifs: multichannel: move channel selection above transport layer
cifs: multichannel: always zero struct cifs_io_parms
cifs: dump Security Type info in DebugData
smb3: fix incorrect number of credits when ioctl MaxOutputResponse > 64K
smb3: default to minimum of two channels when multichannel specified
cifs: multichannel: move channel selection in function
cifs: fix minor typos in comments and log messages
smb3: minor update to compression header definitions
cifs: minor fix to two debug messages
cifs: Standardize logging output
smb3: Add new parm "nodelete"
cifs: move some variables off the stack in smb2_ioctl_query_info
cifs: reduce stack use in smb2_compound_op
cifs: get rid of unused parameter in reconn_setup_dfs_targets()
cifs: handle hostnames that resolve to same ip in failover
cifs: set up next DFS target before generic_ip_connect()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
Pull ext4 updates from Ted Ts'o:
"A lot of bug fixes and cleanups for ext4, including:
- Fix performance problems found in dioread_nolock now that it is the
default, caused by transaction leaks.
- Clean up fiemap handling in ext4
- Clean up and refactor multiple block allocator (mballoc) code
- Fix a problem with mballoc with a smaller file systems running out
of blocks because they couldn't properly use blocks that had been
reserved by inode preallocation.
- Fixed a race in ext4_sync_parent() versus rename()
- Simplify the error handling in the extent manipulation code
- Make sure all metadata I/O errors are felected to
ext4_ext_dirty()'s and ext4_make_inode_dirty()'s callers.
- Avoid passing an error pointer to brelse in ext4_xattr_set()
- Fix race which could result to freeing an inode on the dirty last
in data=journal mode.
- Fix refcount handling if ext4_iget() fails
- Fix a crash in generic/019 caused by a corrupted extent node"
* tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (58 commits)
ext4: avoid unnecessary transaction starts during writeback
ext4: don't block for O_DIRECT if IOCB_NOWAIT is set
ext4: remove the access_ok() check in ext4_ioctl_get_es_cache
fs: remove the access_ok() check in ioctl_fiemap
fs: handle FIEMAP_FLAG_SYNC in fiemap_prep
fs: move fiemap range validation into the file systems instances
iomap: fix the iomap_fiemap prototype
fs: move the fiemap definitions out of fs.h
fs: mark __generic_block_fiemap static
ext4: remove the call to fiemap_check_flags in ext4_fiemap
ext4: split _ext4_fiemap
ext4: fix fiemap size checks for bitmap files
ext4: fix EXT4_MAX_LOGICAL_BLOCK macro
add comment for ext4_dir_entry_2 file_type member
jbd2: avoid leaking transaction credits when unreserving handle
ext4: drop ext4_journal_free_reserved()
ext4: mballoc: use lock for checking free blocks while retrying
ext4: mballoc: refactor ext4_mb_good_group()
ext4: mballoc: introduce pcpu seqcnt for freeing PA to improve ENOSPC handling
ext4: mballoc: refactor ext4_mb_discard_preallocations()
...
|
|
To 2.27
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
first steps in trying to make channels properly reconnect.
* add cifs_ses_find_chan() function to find the enclosing cifs_chan
struct it belongs to
* while we have the session lock and are redoing negprot and
sess.setup in smb2_reconnect() redo the binding of channels.
Signed-off-by: Aurelien Aptel <aaptel@suse.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Add a cifs_chan pointer in struct cifs_ses that points to the channel
currently being bound if ses->binding is true.
Previously it was always the channel past the established count.
This will make reconnecting (and rebinding) a channel easier later on.
Signed-off-by: Aurelien Aptel <aaptel@suse.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Remove static checker warning pointed out by Dan Carpenter:
The patch feeaec621c09: "cifs: multichannel: move channel selection
above transport layer" from Apr 24, 2020, leads to the following
static checker warning:
fs/cifs/smb2pdu.c:149 smb2_hdr_assemble()
error: we previously assumed 'tcon->ses' could be null (see line 133)
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
CC: Aurelien Aptel <aptel@suse.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Move the channel (TCP_Server_Info*) selection from the tranport
layer to higher in the call stack so that:
- credit handling is done with the server that will actually be used
to send.
* ->wait_mtu_credit
* ->set_credits / set_credits
* ->add_credits / add_credits
* add_credits_and_wake_if
- potential reconnection (smb2_reconnect) done when initializing a
request is checked and done with the server that will actually be
used to send.
To do this:
- remove the cifs_pick_channel() call out of compound_send_recv()
- select channel and pass it down by adding a cifs_pick_channel(ses)
call in:
- smb311_posix_mkdir
- SMB2_open
- SMB2_ioctl
- __SMB2_close
- query_info
- SMB2_change_notify
- SMB2_flush
- smb2_async_readv (if none provided in context param)
- SMB2_read (if none provided in context param)
- smb2_async_writev (if none provided in context param)
- SMB2_write (if none provided in context param)
- SMB2_query_directory
- send_set_info
- SMB2_oplock_break
- SMB311_posix_qfs_info
- SMB2_QFS_info
- SMB2_QFS_attr
- smb2_lockv
- SMB2_lease_break
- smb2_compound_op
- smb2_set_ea
- smb2_ioctl_query_info
- smb2_query_dir_first
- smb2_query_info_comound
- smb2_query_symlink
- cifs_writepages
- cifs_write_from_iter
- cifs_send_async_read
- cifs_read
- cifs_readpages
- add TCP_Server_Info *server param argument to:
- cifs_send_recv
- compound_send_recv
- SMB2_open_init
- SMB2_query_info_init
- SMB2_set_info_init
- SMB2_close_init
- SMB2_ioctl_init
- smb2_iotcl_req_init
- SMB2_query_directory_init
- SMB2_notify_init
- SMB2_flush_init
- build_qfs_info_req
- smb2_hdr_assemble
- smb2_reconnect
- fill_small_buf
- smb2_plain_req_init
- __smb2_plain_req_init
The read/write codepath is different than the rest as it is using
pages, io iterators and async calls. To deal with those we add a
server pointer in the cifs_writedata/cifs_readdata/cifs_io_parms
context struct and set it in:
- cifs_writepages (wdata)
- cifs_write_from_iter (wdata)
- cifs_readpages (rdata)
- cifs_send_async_read (rdata)
The [rw]data->server pointer is eventually copied to
cifs_io_parms->server to pass it down to SMB2_read/SMB2_write.
If SMB2_read/SMB2_write is called from a different place that doesn't
set the server field it will pick a channel.
Some places do not pick a channel and just use ses->server or
cifs_ses_server(ses). All cifs_ses_server(ses) calls are in codepaths
involving negprot/sess.setup.
- SMB2_negotiate (binding channel)
- SMB2_sess_alloc_buffer (binding channel)
- SMB2_echo (uses provided one)
- SMB2_logoff (uses master)
- SMB2_tdis (uses master)
(list not exhaustive)
Signed-off-by: Aurelien Aptel <aaptel@suse.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
SMB2_read/SMB2_write check and use cifs_io_parms->server, which might
be uninitialized memory.
This change makes all callers zero-initialize the struct.
Signed-off-by: Aurelien Aptel <aaptel@suse.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Currently the end user is unaware with what sec type the
cifs share is mounted if no sec=<type> option is parsed.
With this patch one can easily check from DebugData.
Example:
1) Name: x.x.x.x Uses: 1 Capability: 0x8001f3fc Session Status: 1 Security type: RawNTLMSSP
Signed-off-by: Kenneth D'souza <kdsouza@redhat.com>
Signed-off-by: Roberto Bergantinos Corpas <rbergant@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Acked-by: Aurelien Aptel <aaptel@suse.com>
|
|
We were not checking to see if ioctl requests asked for more than
64K (ie when CIFSMaxBufSize was > 64K) so when setting larger
CIFSMaxBufSize then ioctls would fail with invalid parameter errors.
When requests ask for more than 64K in MaxOutputResponse then we
need to ask for more than 1 credit.
Signed-off-by: Steve French <stfrench@microsoft.com>
CC: Stable <stable@vger.kernel.org>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
|
|
When "multichannel" is specified on mount, make sure to default to
at least two channels.
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
|
|
Merge more updates from Andrew Morton:
"More mm/ work, plenty more to come
Subsystems affected by this patch series: slub, memcg, gup, kasan,
pagealloc, hugetlb, vmscan, tools, mempolicy, memblock, hugetlbfs,
thp, mmap, kconfig"
* akpm: (131 commits)
arm64: mm: use ARCH_HAS_DEBUG_WX instead of arch defined
x86: mm: use ARCH_HAS_DEBUG_WX instead of arch defined
riscv: support DEBUG_WX
mm: add DEBUG_WX support
drivers/base/memory.c: cache memory blocks in xarray to accelerate lookup
mm/thp: rename pmd_mknotpresent() as pmd_mkinvalid()
powerpc/mm: drop platform defined pmd_mknotpresent()
mm: thp: don't need to drain lru cache when splitting and mlocking THP
hugetlbfs: get unmapped area below TASK_UNMAPPED_BASE for hugetlbfs
sparc32: register memory occupied by kernel as memblock.memory
include/linux/memblock.h: fix minor typo and unclear comment
mm, mempolicy: fix up gup usage in lookup_node
tools/vm/page_owner_sort.c: filter out unneeded line
mm: swap: memcg: fix memcg stats for huge pages
mm: swap: fix vmstats for huge pages
mm: vmscan: limit the range of LRU type balancing
mm: vmscan: reclaim writepage is IO cost
mm: vmscan: determine anon/file pressure balance at the reclaim root
mm: balance LRU lists based on relative thrashing
mm: only count actual rotations as LRU reclaim cost
...
|
|
By moving FIEMAP_FLAG_SYNC handling to fiemap_prep we ensure it is
handled once instead of duplicated, but can still be done under fs locks,
like xfs/iomap intended with its duplicate handling. Also make sure the
error value of filemap_write_and_wait is propagated to user space.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Link: https://lore.kernel.org/r/20200523073016.2944131-8-hch@lst.de
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
Replace fiemap_check_flags with a fiemap_prep helper that also takes the
inode and mapped range, and performs the sanity check and truncation
previously done in fiemap_check_range. This way the validation is inside
the file system itself and thus properly works for the stacked overlayfs
case as well.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Link: https://lore.kernel.org/r/20200523073016.2944131-7-hch@lst.de
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
No need to pull the fiemap definitions into almost every file in the
kernel build.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Ritesh Harjani <riteshh@linux.ibm.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Link: https://lore.kernel.org/r/20200523073016.2944131-5-hch@lst.de
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
They're the same function, and for the purpose of all callers they are
equivalent to lru_cache_add().
[akpm@linux-foundation.org: fix it for local_lock changes]
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Rik van Riel <riel@surriel.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Minchan Kim <minchan@kernel.org>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Link: http://lkml.kernel.org/r/20200520232525.798933-5-hannes@cmpxchg.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This commit moves channel picking code in separate function.
Signed-off-by: Aurelien Aptel <aaptel@suse.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Fix four minor typos in comments and log messages
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
|
|
MS-SMB2 specification was updated in March. Make minor additions
and corrections to compression related definitions in smb2pdu.h
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
|
|
Joe Perches pointed out that we were missing a newline
at the end of two debug messages
Reported-by: Joe Perches <joe@perches.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Use pr_fmt to standardize all logging for fs/cifs.
Some logging output had no CIFS: specific prefix.
Now all output has one of three prefixes:
o CIFS:
o CIFS: VFS:
o Root-CIFS:
Miscellanea:
o Convert printks to pr_<level>
o Neaten macro definitions
o Remove embedded CIFS: prefixes from formats
o Convert "illegal" to "invalid"
o Coalesce formats
o Add missing '\n' format terminations
o Consolidate multiple cifs_dbg continuations into single calls
o More consistent use of upper case first word output logging
o Multiline statement argument alignment and wrapping
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
In order to handle workloads where it is important to make sure that
a buggy app did not delete content on the drive, the new mount option
"nodelete" allows standard permission checks on the server to work,
but prevents on the client any attempts to unlink a file or delete
a directory on that mount point. This can be helpful when running
a little understood app on a network mount that contains important
content that should not be deleted.
Signed-off-by: Steve French <stfrench@microsoft.com>
CC: Stable <stable@vger.kernel.org>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
|
|
Move some large data structures off the stack and into dynamically
allocated memory in the function smb2_ioctl_query_info
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Move a lot of structures and arrays off the stack and into a dynamically
allocated structure instead.
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
The target iterator parameter "it" is not used in
reconn_setup_dfs_targets(), so just remove it.
Signed-off-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
In order to support reconnect to hostnames that resolve to same ip
address, besides relying on the currently set hostname to match DFS
targets, attempt to resolve the targets and then match their addresses
with the reconnected server ip address.
For instance, if we have two hostnames "FOO" and "BAR", and both
resolve to the same ip address, we would be able to handle failover in
DFS paths like
\\FOO\dfs\link1 -> [ \BAZ\share2 (*), \BAR\share1 ]
\\FOO\dfs\link2 -> [ \BAZ\share2 (*), \FOO\share1 ]
so when "BAZ" is no longer accessible, link1 and link2 would get
reconnected despite having different target hostnames.
Signed-off-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
If we mount a very specific DFS link
\\FS0.FOO.COM\dfs\link -> \FS0\share1, \FS1\share2
where its target list contains NB names ("FS0" & "FS1") rather than
FQDN ones ("FS0.FOO.COM" & "FS1.FOO.COM"), we end up connecting to
\FOO\share1 but server->hostname will have "FOO.COM". The reason is
because both "FS0" and "FS0.FOO.COM" resolve to same IP address and
they share same TCP server connection, but "FS0.FOO.COM" was the first
hostname set -- which is OK.
However, if the echo thread timeouts and we still have a good
connection to "FS0", in cifs_reconnect()
rc = generic_ip_connect(server) -> success
if (rc) {
...
reconn_inval_dfs_target(server, cifs_sb, &tgt_list,
&tgt_it);
...
}
...
it successfully reconnects to "FS0" server but does not set up next
DFS target - which should be the same target server "\FS0\share1" -
and server->hostname remains set to "FS0.FOO.COM" rather than "FS0",
as reconn_inval_dfs_target() would have it set to "FS0" if called
earlier.
Finally, in __smb2_reconnect(), the reconnect of tcons would fail
because tcon->ses->server->hostname (FS0.FOO.COM) does not match DFS
target's hostname (FS0).
Fix that by calling reconn_inval_dfs_target() before
generic_ip_connect() so server->hostname will get updated correctly
prior to reconnecting its tcons in __smb2_reconnect().
With "cifs: handle hostnames that resolve to same ip in failover"
patch
- The above problem would not occur.
- We could save an DNS query to find out that they both resolve to
the same ip address.
Signed-off-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
The variable rc is being initialized with a value that is never read
and it is being updated later with a new value. The initialization is
redundant and can be removed.
Addresses-Coverity: ("Unused value")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
The "nolease" mount option is only supported for SMB2+ mounts.
Fail with appropriate error message if vers=1.0 option is passed.
Signed-off-by: Kenneth D'souza <kdsouza@redhat.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Add a helper to directly set the TCP_NODELAY sockopt from kernel space
without going through a fake uaccess. Cleanup the callers to avoid
pointless wrappers now that this is a simple function call.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Sagi Grimberg <sagi@grimberg.me>
Acked-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add a helper to directly set the TCP_CORK sockopt from kernel space
without going through a fake uaccess. Cleanup the callers to avoid
pointless wrappers now that this is a simple function call.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Failed async writes that are requeued may not clean up a refcount
on the file, which can result in a leaked open. This scenario arises
very reliably when using persistent handles and a reconnect occurs
while writing.
cifs_writev_requeue only releases the reference if the write fails
(rc != 0). The server->ops->async_writev operation will take its own
reference, so the initial reference can always be released.
Signed-off-by: Adam McCoy <adam@forsedomani.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
CC: Stable <stable@vger.kernel.org>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
|
|
Coverity scan noted a redundant null check
Coverity-id: 728517
Reported-by: Coverity <scan-admin@coverity.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Shyam Prasad N <nspmangalore@gmail.com>
|
|
As per POSIX, the correct spelling is EACCES:
include/uapi/asm-generic/errno-base.h:#define EACCES 13 /* Permission denied */
Fixes: b8f7442bc46e48fb ("CIFS: refactor cifs_get_inode_info()")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
SMB2_open_init() expects a pre-initialised lease_key when opening a
file with a lease, so set pfid->lease_key prior to calling it in
open_shroot().
This issue was observed when performing some DFS failover tests and
the lease key was never randomly generated.
Signed-off-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
CC: Stable <stable@vger.kernel.org>
|
|
This patch is basically fixing the lookup of tcons (DFS specific) during
reconnect (smb2pdu.c:__smb2_reconnect) to update their prefix paths.
Previously, we relied on the TCP_Server_Info pointer
(misc.c:tcp_super_cb) to determine which tcon to update the prefix path
We could not rely on TCP server pointer to determine which super block
to update the prefix path when reconnecting tcons since it might map
to different tcons that share same TCP connection.
Instead, walk through all cifs super blocks and compare their DFS full
paths with the tcon being updated to.
Signed-off-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
|
|
This disables tcon re-use for DFS shares.
tcon->dfs_path stores the path that the tcon should connect to when
doing failing over.
If that tcon is used multiple times e.g. 2 mounts using it with
different prefixpath, each will need a different dfs_path but there is
only one tcon. The other solution would be to split the tcon in 2
tcons during failover but that is much harder.
tcons could not be shared with DFS in cifs.ko because in a
DFS namespace like:
//domain/dfsroot -> /serverA/dfsroot, /serverB/dfsroot
//serverA/dfsroot/link -> /serverA/target1/aa/bb
//serverA/dfsroot/link2 -> /serverA/target1/cc/dd
you can see that link and link2 are two DFS links that both resolve to
the same target share (/serverA/target1), so cifs.ko will only contain a
single tcon for both link and link2.
The problem with that is, if we (auto)mount "link" and "link2", cifs.ko
will only contain a single tcon for both DFS links so we couldn't
perform failover or refresh the DFS cache for both links because
tcon->dfs_path was set to either "link" or "link2", but not both --
which is wrong.
Signed-off-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Update comment to note that it protects server->dstaddr
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
We use a spinlock while we are reading and accessing the destination address for a server.
We need to also use this spinlock to protect when we are modifying this address from
reconn_set_ipaddr().
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
A dump_stack call for signature related errors can be too noisy
and not of much value in debugging such problems.
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Shyam Prasad N <nspmangalore@gmail.com>
|
|
Found a read performance issue when linux kernel page size is 64KB.
If linux kernel page size is 64KB and mount options cache=strict &
vers=2.1+, it does not support cifs_readpages(). Instead, it is using
cifs_readpage() and cifs_read() with maximum read IO size 16KB, which is
much slower than read IO size 1MB when negotiated SMB 2.1+. Since modern
SMB server supported SMB 2.1+ and Max Read Size can reach more than 64KB
(for example 1MB ~ 8MB), this patch check max_read instead of maxBuf to
determine whether server support readpages() and improve read performance
for page size 64KB & cache=strict & vers=2.1+, and for SMB1 it is more
cleaner to initialize server->max_read to server->maxBuf.
The client is a linux box with linux kernel 4.2.8,
page size 64KB (CONFIG_ARM64_64K_PAGES=y),
cpu arm 1.7GHz, and use mount.cifs as smb client.
The server is another linux box with linux kernel 4.2.8,
share a file '10G.img' with size 10GB,
and use samba-4.7.12 as smb server.
The client mount a share from the server with different
cache options: cache=strict and cache=none,
mount -tcifs //<server_ip>/Public /cache_strict -overs=3.0,cache=strict,username=<xxx>,password=<yyy>
mount -tcifs //<server_ip>/Public /cache_none -overs=3.0,cache=none,username=<xxx>,password=<yyy>
The client download a 10GbE file from the server across 1GbE network,
dd if=/cache_strict/10G.img of=/dev/null bs=1M count=10240
dd if=/cache_none/10G.img of=/dev/null bs=1M count=10240
Found that cache=strict (without patch) is slower read throughput and
smaller read IO size than cache=none.
cache=strict (without patch): read throughput 40MB/s, read IO size is 16KB
cache=strict (with patch): read throughput 113MB/s, read IO size is 1MB
cache=none: read throughput 109MB/s, read IO size is 1MB
Looks like if page size is 64KB,
cifs_set_ops() would use cifs_addr_ops_smallbuf instead of cifs_addr_ops,
/* check if server can support readpages */
if (cifs_sb_master_tcon(cifs_sb)->ses->server->maxBuf <
PAGE_SIZE + MAX_CIFS_HDR_SIZE)
inode->i_data.a_ops = &cifs_addr_ops_smallbuf;
else
inode->i_data.a_ops = &cifs_addr_ops;
maxBuf is came from 2 places, SMB2_negotiate() and CIFSSMBNegotiate(),
(SMB2_MAX_BUFFER_SIZE is 64KB)
SMB2_negotiate():
/* set it to the maximum buffer size value we can send with 1 credit */
server->maxBuf = min_t(unsigned int, le32_to_cpu(rsp->MaxTransactSize),
SMB2_MAX_BUFFER_SIZE);
CIFSSMBNegotiate():
server->maxBuf = le32_to_cpu(pSMBr->MaxBufferSize);
Page size 64KB and cache=strict lead to read_pages() use cifs_readpage()
instead of cifs_readpages(), and then cifs_read() using maximum read IO
size 16KB, which is much slower than maximum read IO size 1MB.
(CIFSMaxBufSize is 16KB by default)
/* FIXME: set up handlers for larger reads and/or convert to async */
rsize = min_t(unsigned int, cifs_sb->rsize, CIFSMaxBufSize);
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
Signed-off-by: Jones Syue <jonessyue@qnap.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
We already dump these keys for SMB3, lets also dump it for SMB2
sessions so that we can use the session key in wireshark to check and validate
that the signatures are correct.
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
|
|
Add experimental support for allowing a swap file to be on an SMB3
mount. There are use cases where swapping over a secure network
filesystem is preferable. In some cases there are no local
block devices large enough, and network block devices can be
hard to setup and secure. And in some cases there are no
local block devices at all (e.g. with the recent addition of
remote boot over SMB3 mounts).
There are various enhancements that can be added later e.g.:
- doing a mandatory byte range lock over the swapfile (until
the Linux VFS is modified to notify the file system that an open
is for a swapfile, when the file can be opened "DENY_ALL" to prevent
others from opening it).
- pinning more buffers in the underlying transport to minimize memory
allocations in the TCP stack under the fs
- documenting how to create ACLs (on the server) to secure the
swapfile (or adding additional tools to cifs-utils to make it easier)
Signed-off-by: Steve French <stfrench@microsoft.com>
Acked-by: Pavel Shilovsky <pshilov@microsoft.com>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
|
|
The noisy posix error message in readdir was supposed
to be an FYI (not enabled by default)
CIFS VFS: XXX dev 66306, reparse 0, mode 755
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
|
|
smbdirect support (SMB3 over RDMA) should be enabled by
default in many configurations.
It is not experimental and is stable enough and has enough
performance benefits to recommend that it be configured by
default. Change the "If unsure N" to "If unsure Y" in
the description of the configuration parameter.
Acked-by: Aurelien Aptel <aaptel@suse.com>
Reviewed-by: Long Li <longli@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Immediate packets should only be sent to peer when there are new
receive credits made available. New credits show up on freeing
receive buffer, not on receiving data.
Fix this by avoid unnenecessary work schedules.
Signed-off-by: Long Li <longli@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
When processing errors from ib_post_send(), the transport state needs to be
rolled back to the condition before the error.
Refactor the old code to make it easy to roll back on IB errors, and fix this.
Signed-off-by: Long Li <longli@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
incoming packets
CIFS uses pre-allocated crypto structures to calculate signatures for both
incoming and outgoing packets. In this way it doesn't need to allocate crypto
structures for every packet, but it requires a lock to prevent concurrent
access to crypto structures.
Remove the lock by allocating crypto structures on the fly for
incoming packets. At the same time, we can still use pre-allocated crypto
structures for outgoing packets, as they are already protected by transport
lock srv_mutex.
Signed-off-by: Long Li <longli@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
back on failure before sending
Recevie credits should be updated before sending the packet, not
before a work is scheduled. Also, the value needs roll back if
something fails and cannot send.
Signed-off-by: Long Li <longli@microsoft.com>
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Sometimes the remote peer may return more send credits than the send queue
depth. If all the send credits are used to post senasd, we may overflow the
send queue.
Fix this by checking the send queue size before posting a send.
Signed-off-by: Long Li <longli@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
