summaryrefslogtreecommitdiff
path: root/fs/dlm
AgeCommit message (Collapse)AuthorFilesLines
2021-09-01fs: dlm: avoid comms shutdown delay in release_lockspaceAlexander Aring1-0/+1
When dlm_release_lockspace does active shutdown on connections to other nodes, the active shutdown will wait for any exisitng passive shutdowns to be resolved. But, the sequence of operations during dlm_release_lockspace can prevent the normal resolution of passive shutdowns (processed normally by way of lockspace recovery.) This disruption of passive shutdown handling can cause the active shutdown to wait for a full timeout period, delaying the completion of dlm_release_lockspace. To fix this, make dlm_release_lockspace resolve existing passive shutdowns (by calling dlm_clear_members earlier), before it does active shutdowns. The active shutdowns will not find any passive shutdowns to wait for, and will not be delayed. Reported-by: Chris Mackowski <cmackows@redhat.com> Signed-off-by: Alexander Aring <aahringo@redhat.com> Signed-off-by: David Teigland <teigland@redhat.com>
2021-08-19fs: dlm: fix return -EINTR on recovery stoppedAlexander Aring3-3/+9
This patch will return -EINTR instead of 1 if recovery is stopped. In case of ping_members() the return value will be checked if the error is -EINTR for signaling another recovery was triggered and the whole recovery process will come to a clean end to process the next one. Returning 1 will abort the recovery process and can leave the recovery in a broken state. It was reported with the following kernel log message attached and a gfs2 mount stopped working: "dlm: bobvirt1: dlm_recover_members error 1" whereas 1 was returned because of a conversion of "dlm_recovery_stopped()" to an errno was missing which this patch will introduce. While on it all other possible missing errno conversions at other places were added as they are done as in other places. It might be worth to check the error case at this recovery level, because some of the functionality also returns -ENOBUFS and check why recovery ends in a broken state. However this will fix the issue if another recovery was triggered at some points of recovery handling. Reported-by: Bob Peterson <rpeterso@redhat.com> Signed-off-by: Alexander Aring <aahringo@redhat.com> Signed-off-by: David Teigland <teigland@redhat.com>
2021-08-19fs: dlm: implement delayed ack handlingAlexander Aring3-8/+50
This patch changes that we don't ack each message. Lowcomms will take care about to send an ack back after a bulk of messages was processed. Currently it's only when the whole receive buffer was processed, there might better positions to send an ack back but only the lowcomms implementation know when there are more data to receive. This patch has also disadvantages that we might retransmit more on errors, however this is a very rare case. Tested with make_panic on gfs2 with three nodes by running: trace-cmd record -p function -l 'dlm_send_ack' sleep 100 and trace-cmd report | wc -l Before patch: - 20548 - 21376 - 21398 After patch: - 18338 - 20679 - 19949 Signed-off-by: Alexander Aring <aahringo@redhat.com> Signed-off-by: David Teigland <teigland@redhat.com>
2021-07-19fs: dlm: move receive loop into receive handlerAlexander Aring1-37/+31
This patch moves the kernel_recvmsg() loop call into the receive_from_sock() function instead of doing the loop outside the function and abort the loop over it's return value. Signed-off-by: Alexander Aring <aahringo@redhat.com> Signed-off-by: David Teigland <teigland@redhat.com>
2021-07-19fs: dlm: fix multiple empty writequeue allocAlexander Aring1-0/+21
This patch will add a mutex that a connection can allocate a writequeue entry buffer only at a sleepable context at one time. If multiple caller waits at the writequeue spinlock and the spinlock gets release it could be that multiple new writequeue page buffers were allocated instead of allocate one writequeue page buffer and other waiters will use remaining buffer of it. It will only be the case for sleepable context which is the common case. In non-sleepable contexts like retransmission we just don't care about such behaviour. Signed-off-by: Alexander Aring <aahringo@redhat.com> Signed-off-by: David Teigland <teigland@redhat.com>
2021-07-19fs: dlm: generic connect funcAlexander Aring1-193/+150
This patch adds a generic connect function for TCP and SCTP. If the connect functionality differs from each other additional callbacks in dlm_proto_ops were added. The sockopts callback handling will guarantee that sockets created by connect() will use the same options as sockets created by accept(). Signed-off-by: Alexander Aring <aahringo@redhat.com> Signed-off-by: David Teigland <teigland@redhat.com>
2021-07-19fs: dlm: auto load sctp moduleAlexander Aring1-5/+15
This patch adds a "for now" better handling of missing SCTP support in the kernel and try to load the sctp module if SCTP is set. Signed-off-by: Alexander Aring <aahringo@redhat.com> Signed-off-by: David Teigland <teigland@redhat.com>
2021-07-19fs: dlm: introduce generic listenAlexander Aring1-115/+113
This patch combines each transport layer listen functionality into one listen function. Per transport layer differences are provided by additional callbacks in dlm_proto_ops. This patch drops silently sock_set_keepalive() for listen tcp sockets only. This socket option is not set at connecting sockets, I also don't see the sense of set keepalive for sockets which are created by accept() only. Signed-off-by: Alexander Aring <aahringo@redhat.com> Signed-off-by: David Teigland <teigland@redhat.com>
2021-07-19fs: dlm: move to static proto opsAlexander Aring1-22/+30
This patch moves the per transport socket callbacks to a static const array. We can support only one transport socket for the init namespace which will be determinted by reading the dlm config at lowcomms_start(). Signed-off-by: Alexander Aring <aahringo@redhat.com> Signed-off-by: David Teigland <teigland@redhat.com>
2021-07-19fs: dlm: introduce con_next_wq helperAlexander Aring1-22/+35
This patch introduce a function to determine if something is ready to being send in the writequeue. It's not just that the writequeue is not empty additional the first entry need to have a valid length field. Signed-off-by: Alexander Aring <aahringo@redhat.com> Signed-off-by: David Teigland <teigland@redhat.com>
2021-07-19fs: dlm: cleanup and remove _send_rcomAlexander Aring1-18/+11
The _send_rcom() can be removed and we call directly dlm_rcom_out(). As we doing that we removing the struct dlm_ls parameter which isn't used. Signed-off-by: Alexander Aring <aahringo@redhat.com> Signed-off-by: David Teigland <teigland@redhat.com>
2021-07-19fs: dlm: clear CF_APP_LIMITED on closeAlexander Aring1-0/+1
If send_to_sock() sets CF_APP_LIMITED limited bit and it has not been cleared by a waiting lowcomms_write_space() yet and a close_connection() apprears we should clear the CF_APP_LIMITED bit again because the connection starts from a new state again at reconnect. Signed-off-by: Alexander Aring <aahringo@redhat.com> Signed-off-by: David Teigland <teigland@redhat.com>
2021-07-19fs: dlm: fix typo in tlv prefixAlexander Aring1-1/+1
This patch fixes a small typo in a unused struct field. It should named be t_pad instead of o_pad. Came over this as I updated wireshark dissector. Signed-off-by: Alexander Aring <aahringo@redhat.com> Signed-off-by: David Teigland <teigland@redhat.com>
2021-07-19fs: dlm: use READ_ONCE for config varAlexander Aring1-1/+1
This patch will use READ_ONCE to signal the compiler to read this variable only one time. If we don't do that it could be that the compiler read this value more than one time, because some optimizations, from the configure data which might can be changed during this time. Signed-off-by: Alexander Aring <aahringo@redhat.com> Signed-off-by: David Teigland <teigland@redhat.com>
2021-07-19fs: dlm: use sk->sk_socket instead of con->sockAlexander Aring1-2/+1
Instead of dereference "con->sock" we can get the socket structure over "sk->sk_socket" as well. This patch will switch to this behaviour. Signed-off-by: Alexander Aring <aahringo@redhat.com> Signed-off-by: David Teigland <teigland@redhat.com>
2021-06-11fs: dlm: invalid buffer access in lookup errorAlexander Aring1-2/+17
This patch will evaluate the message length if a dlm opts header can fit in before accessing it if a node lookup fails. The invalid sequence error means that the version detection failed and an unexpected message arrived. For debugging such situation the type of arrived message is important to know. Signed-off-by: Alexander Aring <aahringo@redhat.com> Signed-off-by: David Teigland <teigland@redhat.com>
2021-06-11fs: dlm: fix race in mhandle deletionAlexander Aring1-14/+21
This patch fixes a race between mhandle deletion in case of receiving an acknowledge and flush of all pending mhandle in cases of an timeout or resetting node states. Fixes: 489d8e559c65 ("fs: dlm: add reliable connection if reconnect") Reported-by: Guillaume Nault <gnault@redhat.com> Signed-off-by: Alexander Aring <aahringo@redhat.com> Signed-off-by: David Teigland <teigland@redhat.com>
2021-06-02fs: dlm: rename socket and app buffer definesAlexander Aring8-13/+13
This patch renames DEFAULT_BUFFER_SIZE to DLM_MAX_SOCKET_BUFSIZE and LOWCOMMS_MAX_TX_BUFFER_LEN to DLM_MAX_APP_BUFSIZE as they are proper names to define what's behind those values. The DLM_MAX_SOCKET_BUFSIZE defines the maximum size of buffer which can be handled on socket layer, the DLM_MAX_APP_BUFSIZE defines the maximum size of buffer which can be handled by the DLM application layer. Signed-off-by: Alexander Aring <aahringo@redhat.com> Signed-off-by: David Teigland <teigland@redhat.com>
2021-06-02fs: dlm: introduce proto valuesAlexander Aring3-5/+23
Currently the dlm protocol values are that TCP is 0 and everything else is SCTP. This makes it difficult to introduce possible other transport layers. The only one user space tool dlm_controld, which I am aware of, handles the protocol value 1 for SCTP. We change it now to handle SCTP as 1, this will break user space API but it will fix it so we can add possible other transport layers. Signed-off-by: Alexander Aring <aahringo@redhat.com> Signed-off-by: David Teigland <teigland@redhat.com>
2021-06-02fs: dlm: move dlm allow connAlexander Aring1-4/+3
This patch checks if possible allowing new connections is allowed before queueing the listen socket to accept new connections. Signed-off-by: Alexander Aring <aahringo@redhat.com> Signed-off-by: David Teigland <teigland@redhat.com>
2021-06-02fs: dlm: use alloc_ordered_workqueueAlexander Aring1-4/+2
The proper way to allocate ordered workqueues is to use alloc_ordered_workqueue() function. The current way implies an ordered workqueue which is also required by dlm. Signed-off-by: Alexander Aring <aahringo@redhat.com> Signed-off-by: David Teigland <teigland@redhat.com>
2021-06-02fs: dlm: fix memory leak when fencedAlexander Aring1-0/+9
I got some kmemleak report when a node was fenced. The user space tool dlm_controld will therefore run some rmdir() in dlm configfs which was triggering some memleaks. This patch stores the sps and cms attributes which stores some handling for subdirectories of the configfs cluster entry and free them if they get released as the parent directory gets freed. unreferenced object 0xffff88810d9e3e00 (size 192): comm "dlm_controld", pid 342, jiffies 4294698126 (age 55438.801s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 73 70 61 63 65 73 00 00 ........spaces.. 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<00000000db8b640b>] make_cluster+0x5d/0x360 [<000000006a571db4>] configfs_mkdir+0x274/0x730 [<00000000b094501c>] vfs_mkdir+0x27e/0x340 [<0000000058b0adaf>] do_mkdirat+0xff/0x1b0 [<00000000d1ffd156>] do_syscall_64+0x40/0x80 [<00000000ab1408c8>] entry_SYSCALL_64_after_hwframe+0x44/0xae unreferenced object 0xffff88810d9e3a00 (size 192): comm "dlm_controld", pid 342, jiffies 4294698126 (age 55438.801s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 63 6f 6d 6d 73 00 00 00 ........comms... 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<00000000a7ef6ad2>] make_cluster+0x82/0x360 [<000000006a571db4>] configfs_mkdir+0x274/0x730 [<00000000b094501c>] vfs_mkdir+0x27e/0x340 [<0000000058b0adaf>] do_mkdirat+0xff/0x1b0 [<00000000d1ffd156>] do_syscall_64+0x40/0x80 [<00000000ab1408c8>] entry_SYSCALL_64_after_hwframe+0x44/0xae Signed-off-by: Alexander Aring <aahringo@redhat.com> Signed-off-by: David Teigland <teigland@redhat.com>
2021-06-02fs: dlm: fix lowcomms_start error caseAlexander Aring1-3/+12
This patch fixes the error path handling in lowcomms_start(). We need to cleanup some static allocated data structure and cleanup possible workqueue if these have started. Signed-off-by: Alexander Aring <aahringo@redhat.com> Signed-off-by: David Teigland <teigland@redhat.com>
2021-05-26fs: dlm: Fix spelling mistake "stucked" -> "stuck"Colin Ian King1-2/+2
There are spelling mistake in log messages. Fix these. Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: David Teigland <teigland@redhat.com>
2021-05-26fs: dlm: Fix memory leak of object mhColin Ian King1-4/+4
There is an error return path that is not kfree'ing mh after it has been successfully allocates. Fix this by moving the call to create_rcom to after the check on rc_in->rc_id check to avoid this. Thanks to Alexander Ahring Oder Aring for suggesting the correct way to fix this. Addresses-Coverity: ("Resource leak") Fixes: a070a91cf140 ("fs: dlm: add more midcomms hooks") Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: David Teigland <teigland@redhat.com>
2021-05-25fs: dlm: don't allow half transmitted messagesAlexander Aring1-35/+60
This patch will clean a dirty page buffer if a reconnect occurs. If a page buffer was half transmitted we cannot start inside the middle of a dlm message if a node connects again. I observed invalid length receptions errors and was guessing that this behaviour occurs, after this patch I never saw an invalid message length again. This patch might drops more messages for dlm version 3.1 but 3.1 can't deal with half messages as well, for 3.2 it might trigger more re-transmissions but will not leave dlm in a broken state. Signed-off-by: Alexander Aring <aahringo@redhat.com> Signed-off-by: David Teigland <teigland@redhat.com>
2021-05-25fs: dlm: add midcomms debugfs functionalityAlexander Aring4-0/+91
This patch adds functionality to debug midcomms per connection state inside a comms directory which is similar like dlm configfs. Currently there exists the possibility to read out two attributes which is the send queue counter and the version of each midcomms node state. Signed-off-by: Alexander Aring <aahringo@redhat.com> Signed-off-by: David Teigland <teigland@redhat.com>
2021-05-25fs: dlm: add reliable connection if reconnectAlexander Aring7-51/+1292
This patch introduce to make a tcp lowcomms connection reliable even if reconnects occurs. This is done by an application layer re-transmission handling and sequence numbers in dlm protocols. There are three new dlm commands: DLM_OPTS: This will encapsulate an existing dlm message (and rcom message if they don't have an own application side re-transmission handling). As optional handling additional tlv's (type length fields) can be appended. This can be for example a sequence number field. However because in DLM_OPTS the lockspace field is unused and a sequence number is a mandatory field it isn't made as a tlv and we put the sequence number inside the lockspace id. The possibility to add optional options are still there for future purposes. DLM_ACK: Just a dlm header to acknowledge the receive of a DLM_OPTS message to it's sender. DLM_FIN: This provides a 4 way handshake for connection termination inclusive support for half-closed connections. It's provided on application layer because SCTP doesn't support half-closed sockets, the shutdown() call can interrupted by e.g. TCP resets itself and a hard logic to implement it because the othercon paradigm in lowcomms. The 4-way termination handshake also solve problems to synchronize peer EOF arrival and that the cluster manager removes the peer in the node membership handling of DLM. In some cases messages can be still transmitted in this time and we need to wait for the node membership event. To provide a reliable connection the node will retransmit all unacknowledges message to it's peer on reconnect. The receiver will then filtering out the next received message and drop all messages which are duplicates. As RCOM_STATUS and RCOM_NAMES messages are the first messages which are exchanged and they have they own re-transmission handling, there exists logic that these messages must be first. If these messages arrives we store the dlm version field. This handling is on DLM 3.1 and after this patch 3.2 the same. A backwards compatibility handling has been added which seems to work on tests without tcpkill, however it's not recommended to use DLM 3.1 and 3.2 at the same time, because DLM 3.2 tries to fix long term bugs in the DLM protocol. Signed-off-by: Alexander Aring <aahringo@redhat.com> Signed-off-by: David Teigland <teigland@redhat.com>
2021-05-25fs: dlm: add union in dlm header for lockspace idAlexander Aring4-9/+14
This patch adds union inside the lockspace id to handle it also for another use case for a different dlm command. Signed-off-by: Alexander Aring <aahringo@redhat.com> Signed-off-by: David Teigland <teigland@redhat.com>
2021-05-25fs: dlm: move out some hash functionalityAlexander Aring2-9/+10
This patch moves out some lowcomms hash functionality into lowcomms header to provide them to other layers like midcomms as well. Signed-off-by: Alexander Aring <aahringo@redhat.com> Signed-off-by: David Teigland <teigland@redhat.com>
2021-05-25fs: dlm: add functionality to re-transmit a messageAlexander Aring2-19/+67
This patch introduces a retransmit functionality for a lowcomms message handle. It's just allocates a new buffer and transmit it again, no special handling about prioritize it because keeping bytestream in order. To avoid another connection look some refactor was done to make a new buffer allocation with a preexisting connection pointer. Signed-off-by: Alexander Aring <aahringo@redhat.com> Signed-off-by: David Teigland <teigland@redhat.com>
2021-05-25fs: dlm: make buffer handling per msgAlexander Aring5-39/+117
This patch makes the void pointer handle for lowcomms functionality per message and not per page allocation entry. A refcount handling for the handle was added to keep the message alive until the user doesn't need it anymore. There exists now a per message callback which will be called when allocating a new buffer. This callback will be guaranteed to be called according the order of the sending buffer, which can be used that the caller increments a sequence number for the dlm message handle. For transition process we cast the dlm_mhandle to dlm_msg and vice versa until the midcomms layer will implement a specific dlm_mhandle structure. Signed-off-by: Alexander Aring <aahringo@redhat.com> Signed-off-by: David Teigland <teigland@redhat.com>
2021-05-25fs: dlm: add more midcomms hooksAlexander Aring7-42/+133
This patch prepares hooks to redirect to the midcomms layer which will be used by the midcomms re-transmit handling. There exists the new concept of stateless buffers allocation and commits. This can be used to bypass the midcomms re-transmit handling. It is used by RCOM_STATUS and RCOM_NAMES messages, because they have their own ping-like re-transmit handling. As well these two messages will be used to determine the DLM version per node, because these two messages are per observation the first messages which are exchanged. Cluster manager events for node membership are added to add support for half-closed connections in cases that the peer connection get to an end of file but DLM still holds membership of the node. In this time DLM can still trigger new message which we should allow. After the cluster manager node removal event occurs it safe to close the connection. Signed-off-by: Alexander Aring <aahringo@redhat.com> Signed-off-by: David Teigland <teigland@redhat.com>
2021-05-25fs: dlm: public header in out utilityAlexander Aring2-2/+4
This patch allows to use header_out() and header_in() outside of dlm util functionality. Signed-off-by: Alexander Aring <aahringo@redhat.com> Signed-off-by: David Teigland <teigland@redhat.com>
2021-05-25fs: dlm: fix connection tcp EOF handlingAlexander Aring1-5/+43
This patch fixes the EOF handling for TCP that if and EOF is received we will close the socket next time the writequeue runs empty. This is a half-closed socket functionality which doesn't exists in SCTP. The midcomms layer will do a half closed socket functionality on DLM side to solve this problem for the SCTP case. However there is still the last ack flying around but other reset functionality will take care of it if it got lost. Signed-off-by: Alexander Aring <aahringo@redhat.com> Signed-off-by: David Teigland <teigland@redhat.com>
2021-05-25fs: dlm: cancel work sync otherconAlexander Aring1-1/+1
These rx tx flags arguments are for signaling close_connection() from which worker they are called. Obviously the receive worker cannot cancel itself and vice versa for swork. For the othercon the receive worker should only be used, however to avoid deadlocks we should pass the same flags as the original close_connection() was called. Signed-off-by: Alexander Aring <aahringo@redhat.com> Signed-off-by: David Teigland <teigland@redhat.com>
2021-05-25fs: dlm: reconnect if socket error report occursAlexander Aring1-21/+39
This patch will change the reconnect handling that if an error occurs if a socket error callback is occurred. This will also handle reconnects in a non blocking connecting case which is currently missing. If error ECONNREFUSED is reported we delay the reconnect by one second. Signed-off-by: Alexander Aring <aahringo@redhat.com> Signed-off-by: David Teigland <teigland@redhat.com>
2021-05-25fs: dlm: set is othercon flagAlexander Aring1-0/+3
There is a is othercon flag which is never used, this patch will set it and printout a warning if the othercon ever sends a dlm message which should never be the case. Signed-off-by: Alexander Aring <aahringo@redhat.com> Signed-off-by: David Teigland <teigland@redhat.com>
2021-05-25fs: dlm: fix srcu read lock usageAlexander Aring1-23/+52
This patch holds the srcu connection read lock in cases where we lookup the connections and accessing it. We don't hold the srcu lock in workers function where the scheduled worker is part of the connection itself. The connection should not be freed if any worker is scheduled or pending. Signed-off-by: Alexander Aring <aahringo@redhat.com> Signed-off-by: David Teigland <teigland@redhat.com>
2021-05-25fs: dlm: add dlm macros for ratelimit logAlexander Aring2-2/+4
This patch add ratelimit macro to dlm subsystem and will set the connecting log message to ratelimit. In non blocking connecting cases it will print out this message a lot. Signed-off-by: Alexander Aring <aahringo@redhat.com> Signed-off-by: David Teigland <teigland@redhat.com>
2021-05-25fs: dlm: always run complete for possible waitersAlexander Aring1-6/+12
This patch changes the ping_members() result that we always run complete() for possible waiters. We handle the -EINTR error code as successful. This error code is returned if the recovery is stopped which is likely that a new recovery is triggered with a new members configuration and ping_members() runs again. Signed-off-by: Alexander Aring <aahringo@redhat.com> Signed-off-by: David Teigland <teigland@redhat.com>
2021-03-29fs: dlm: fix missing unlock on error in accept_from_sock()Yang Yingliang1-0/+1
Add the missing unlock before return from accept_from_sock() in the error handling case. Fixes: 6cde210a9758 ("fs: dlm: add helper for init connection") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Signed-off-by: David Teigland <teigland@redhat.com>
2021-03-09fs: dlm: add shutdown hookAlexander Aring3-28/+35
This patch fixes issues which occurs when dlm lowcomms synchronize their workqueues but dlm application layer already released the lockspace. In such cases messages like: dlm: gfs2: release_lockspace final free dlm: invalid lockspace 3841231384 from 1 cmd 1 type 11 are printed on the kernel log. This patch is solving this issue by introducing a new "shutdown" hook before calling "stop" hook when the lockspace is going to be released finally. This should pretend any dlm messages sitting in the workqueues during or after lockspace removal. It's necessary to call dlm_scand_stop() as I instrumented dlm_lowcomms_get_buffer() code to report a warning after it's called after dlm_midcomms_shutdown() functionality, see below: WARNING: CPU: 1 PID: 3794 at fs/dlm/midcomms.c:1003 dlm_midcomms_get_buffer+0x167/0x180 Modules linked in: joydev iTCO_wdt intel_pmc_bxt iTCO_vendor_support drm_ttm_helper ttm pcspkr serio_raw i2c_i801 i2c_smbus drm_kms_helper virtio_scsi lpc_ich virtio_balloon virtio_console xhci_pci xhci_pci_renesas cec qemu_fw_cfg drm [last unloaded: qxl] CPU: 1 PID: 3794 Comm: dlm_scand Tainted: G W 5.11.0+ #26 Hardware name: Red Hat KVM/RHEL-AV, BIOS 1.13.0-2.module+el8.3.0+7353+9de0a3cc 04/01/2014 RIP: 0010:dlm_midcomms_get_buffer+0x167/0x180 Code: 5d 41 5c 41 5d 41 5e 41 5f c3 0f 0b 45 31 e4 5b 5d 4c 89 e0 41 5c 41 5d 41 5e 41 5f c3 4c 89 e7 45 31 e4 e8 3b f1 ec ff eb 86 <0f> 0b 4c 89 e7 45 31 e4 e8 2c f1 ec ff e9 74 ff ff ff 0f 1f 80 00 RSP: 0018:ffffa81503f8fe60 EFLAGS: 00010202 RAX: 0000000000000008 RBX: ffff8f969827f200 RCX: 0000000000000001 RDX: 0000000000000000 RSI: ffffffffad1e89a0 RDI: ffff8f96a5294160 RBP: 0000000000000001 R08: 0000000000000000 R09: ffff8f96a250bc60 R10: 00000000000045d3 R11: 0000000000000000 R12: ffff8f96a250bc60 R13: ffffa81503f8fec8 R14: 0000000000000070 R15: 0000000000000c40 FS: 0000000000000000(0000) GS:ffff8f96fbc00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000055aa3351c000 CR3: 000000010bf22000 CR4: 00000000000006e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: dlm_scan_rsbs+0x420/0x670 ? dlm_uevent+0x20/0x20 dlm_scand+0xbf/0xe0 kthread+0x13a/0x150 ? __kthread_bind_mask+0x60/0x60 ret_from_fork+0x22/0x30 To synchronize all dlm scand messages we stop it right before shutdown hook. Signed-off-by: Alexander Aring <aahringo@redhat.com> Signed-off-by: David Teigland <teigland@redhat.com>
2021-03-09fs: dlm: flush swork on shutdownAlexander Aring1-4/+1
This patch fixes the flushing of send work before shutdown. The function cancel_work_sync() is not the right workqueue functionality to use here as it would cancel the work if the work queues itself. In cases of EAGAIN in send() for dlm message we need to be sure that everything is send out before. The function flush_work() will ensure that every send work is be done inclusive in EAGAIN cases. Signed-off-by: Alexander Aring <aahringo@redhat.com> Signed-off-by: David Teigland <teigland@redhat.com>
2021-03-09fs: dlm: remove unaligned memory access handlingAlexander Aring1-14/+12
This patch removes unaligned memory access handling for receiving midcomms messages. This handling will not fix the unaligned memory access in general. All messages should be length aligned to 8 bytes, there exists cases where this isn't the case. It's part of the sending handling to not send such messages. As the sending handling itself, with the internal allocator of page buffers, can occur in unaligned memory access of dlm message fields we just ignore that problem for now as it seems this code is used by architecture which can handle it. This patch adds a comment to take care about that problem in a major bump of dlm protocol. Signed-off-by: Alexander Aring <aahringo@redhat.com> Signed-off-by: David Teigland <teigland@redhat.com>
2021-03-09fs: dlm: check on minimum msglen sizeAlexander Aring1-3/+4
This patch adds an additional check for minimum dlm header size which is an invalid dlm message and signals a broken stream. A msglen field cannot be less than the dlm header size because the field is inclusive header lengths. Signed-off-by: Alexander Aring <aahringo@redhat.com> Signed-off-by: David Teigland <teigland@redhat.com>
2021-03-09fs: dlm: simplify writequeue handlingAlexander Aring1-40/+43
This patch cleans up the current dlm sending allocator handling by using some named macros, list functionality and removes some goto statements. Signed-off-by: Alexander Aring <aahringo@redhat.com> Signed-off-by: David Teigland <teigland@redhat.com>
2021-03-09fs: dlm: use GFP_ZERO for page bufferAlexander Aring3-5/+1
This patch uses GFP_ZERO for allocate a page for the internal dlm sending buffer allocator instead of calling memset zero after every allocation. An already allocated space will never be reused again. Signed-off-by: Alexander Aring <aahringo@redhat.com> Signed-off-by: David Teigland <teigland@redhat.com>
2021-03-09fs: dlm: change allocation limitsAlexander Aring1-2/+4
While running tcpkill I experienced invalid header length values while receiving to check that a node doesn't try to send a invalid dlm message we also check on applications minimum allocation limit. Also use DEFAULT_BUFFER_SIZE as maximum allocation limit. The define LOWCOMMS_MAX_TX_BUFFER_LEN is to calculate maximum buffer limits on application layer, future midcomms layer will subtract their needs from this define. Signed-off-by: Alexander Aring <aahringo@redhat.com> Signed-off-by: David Teigland <teigland@redhat.com>
2021-03-09fs: dlm: add check if dlm is currently runningAlexander Aring3-3/+36
This patch adds checks for dlm config attributes regarding to protocol parameters as it makes only sense to change them when dlm is not running. It also adds a check for valid protocol specifiers and return invalid argument if they are not supported. Signed-off-by: Alexander Aring <aahringo@redhat.com> Signed-off-by: David Teigland <teigland@redhat.com>