summaryrefslogtreecommitdiff
path: root/fs/eventpoll.c
AgeCommit message (Collapse)AuthorFilesLines
2019-08-21PM / wakeup: Show wakeup sources stats in sysfsTri Vo1-2/+2
Add an ID and a device pointer to 'struct wakeup_source'. Use them to to expose wakeup sources statistics in sysfs under /sys/class/wakeup/wakeup<ID>/*. Co-developed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Co-developed-by: Stephen Boyd <swboyd@chromium.org> Signed-off-by: Stephen Boyd <swboyd@chromium.org> Signed-off-by: Tri Vo <trong@android.com> Tested-by: Kalesh Singh <kaleshsingh@google.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-07-19proc/sysctl: add shared variables for range checkMatteo Croce1-2/+2
In the sysctl code the proc_dointvec_minmax() function is often used to validate the user supplied value between an allowed range. This function uses the extra1 and extra2 members from struct ctl_table as minimum and maximum allowed value. On sysctl handler declaration, in every source file there are some readonly variables containing just an integer which address is assigned to the extra1 and extra2 members, so the sysctl range is enforced. The special values 0, 1 and INT_MAX are very often used as range boundary, leading duplication of variables like zero=0, one=1, int_max=INT_MAX in different source files: $ git grep -E '\.extra[12].*&(zero|one|int_max)' |wc -l 248 Add a const int array containing the most commonly used values, some macros to refer more easily to the correct array member, and use them instead of creating a local one for every object file. This is the bloat-o-meter output comparing the old and new binary compiled with the default Fedora config: # scripts/bloat-o-meter -d vmlinux.o.old vmlinux.o add/remove: 2/2 grow/shrink: 0/2 up/down: 24/-188 (-164) Data old new delta sysctl_vals - 12 +12 __kstrtab_sysctl_vals - 12 +12 max 14 10 -4 int_max 16 - -16 one 68 - -68 zero 128 28 -100 Total: Before=20583249, After=20583085, chg -0.00% [mcroce@redhat.com: tipc: remove two unused variables] Link: http://lkml.kernel.org/r/20190530091952.4108-1-mcroce@redhat.com [akpm@linux-foundation.org: fix net/ipv6/sysctl_net_ipv6.c] [arnd@arndb.de: proc/sysctl: make firmware loader table conditional] Link: http://lkml.kernel.org/r/20190617130014.1713870-1-arnd@arndb.de [akpm@linux-foundation.org: fix fs/eventpoll.c] Link: http://lkml.kernel.org/r/20190430180111.10688-1-mcroce@redhat.com Signed-off-by: Matteo Croce <mcroce@redhat.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Kees Cook <keescook@chromium.org> Reviewed-by: Aaron Tomlin <atomlin@redhat.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-07-17signal: simplify set_user_sigmask/restore_user_sigmaskOleg Nesterov1-8/+4
task->saved_sigmask and ->restore_sigmask are only used in the ret-from- syscall paths. This means that set_user_sigmask() can save ->blocked in ->saved_sigmask and do set_restore_sigmask() to indicate that ->blocked was modified. This way the callers do not need 2 sigset_t's passed to set/restore and restore_user_sigmask() renamed to restore_saved_sigmask_unless() turns into the trivial helper which just calls restore_saved_sigmask(). Link: http://lkml.kernel.org/r/20190606113206.GA9464@redhat.com Signed-off-by: Oleg Nesterov <oleg@redhat.com> Cc: Deepa Dinamani <deepa.kernel@gmail.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Jens Axboe <axboe@kernel.dk> Cc: Davidlohr Bueso <dave@stgolabs.net> Cc: Eric Wong <e@80x24.org> Cc: Jason Baron <jbaron@akamai.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Al Viro <viro@ZenIV.linux.org.uk> Cc: Eric W. Biederman <ebiederm@xmission.com> Cc: David Laight <David.Laight@aculab.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-06-29signal: remove the wrong signal_pending() check in restore_user_sigmask()Oleg Nesterov1-2/+2
This is the minimal fix for stable, I'll send cleanups later. Commit 854a6ed56839 ("signal: Add restore_user_sigmask()") introduced the visible change which breaks user-space: a signal temporary unblocked by set_user_sigmask() can be delivered even if the caller returns success or timeout. Change restore_user_sigmask() to accept the additional "interrupted" argument which should be used instead of signal_pending() check, and update the callers. Eric said: : For clarity. I don't think this is required by posix, or fundamentally to : remove the races in select. It is what linux has always done and we have : applications who care so I agree this fix is needed. : : Further in any case where the semantic change that this patch rolls back : (aka where allowing a signal to be delivered and the select like call to : complete) would be advantage we can do as well if not better by using : signalfd. : : Michael is there any chance we can get this guarantee of the linux : implementation of pselect and friends clearly documented. The guarantee : that if the system call completes successfully we are guaranteed that no : signal that is unblocked by using sigmask will be delivered? Link: http://lkml.kernel.org/r/20190604134117.GA29963@redhat.com Fixes: 854a6ed56839a40f6b5d02a2962f48841482eec4 ("signal: Add restore_user_sigmask()") Signed-off-by: Oleg Nesterov <oleg@redhat.com> Reported-by: Eric Wong <e@80x24.org> Tested-by: Eric Wong <e@80x24.org> Acked-by: "Eric W. Biederman" <ebiederm@xmission.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Deepa Dinamani <deepa.kernel@gmail.com> Cc: Michael Kerrisk <mtk.manpages@gmail.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Davidlohr Bueso <dave@stgolabs.net> Cc: Jason Baron <jbaron@akamai.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Al Viro <viro@ZenIV.linux.org.uk> Cc: David Laight <David.Laight@ACULAB.COM> Cc: <stable@vger.kernel.org> [5.0+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-05-30treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 152Thomas Gleixner1-6/+1
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 3029 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190527070032.746973796@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-03-08epoll: use rwlock in order to reduce ep_poll_callback() contentionRoman Penyaev1-36/+122
The goal of this patch is to reduce contention of ep_poll_callback() which can be called concurrently from different CPUs in case of high events rates and many fds per epoll. Problem can be very well reproduced by generating events (write to pipe or eventfd) from many threads, while consumer thread does polling. In other words this patch increases the bandwidth of events which can be delivered from sources to the poller by adding poll items in a lockless way to the list. The main change is in replacement of the spinlock with a rwlock, which is taken on read in ep_poll_callback(), and then by adding poll items to the tail of the list using xchg atomic instruction. Write lock is taken everywhere else in order to stop list modifications and guarantee that list updates are fully completed (I assume that write side of a rwlock does not starve, it seems qrwlock implementation has these guarantees). The following are some microbenchmark results based on the test [1] which starts threads which generate N events each. The test ends when all events are successfully fetched by the poller thread: spinlock ======== threads events/ms run-time ms 8 6402 12495 16 7045 22709 32 7395 43268 rwlock + xchg ============= threads events/ms run-time ms 8 10038 7969 16 12178 13138 32 13223 24199 According to the results bandwidth of delivered events is significantly increased, thus execution time is reduced. This patch was tested with different sort of microbenchmarks and artificial delays (e.g. "udelay(get_random_int() & 0xff)") introduced in kernel on paths where items are added to lists. [1] https://github.com/rouming/test-tools/blob/master/stress-epoll.c Link: http://lkml.kernel.org/r/20190103150104.17128-5-rpenyaev@suse.de Signed-off-by: Roman Penyaev <rpenyaev@suse.de> Cc: Davidlohr Bueso <dbueso@suse.de> Cc: Jason Baron <jbaron@akamai.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-03-08epoll: unify awaking of wakeup source on ep_poll_callback() pathRoman Penyaev1-8/+1
Original comment "Activate ep->ws since epi->ws may get deactivated at any time" indeed sounds loud, but it is incorrect, because the path where we check epi->ws is a path where insert to ovflist happens, i.e. ep_scan_ready_list() has taken ep->mtx and waits for this callback to finish, thus ep_modify() (which unregisters wakeup source) waits for ep_scan_ready_list(). Here in this patch I simply call ep_pm_stay_awake_rcu(), which is a bit extra for this path (indirectly protected by main ep->mtx, so even rcu is not needed), but I do not want to create another naked __ep_pm_stay_awake() variant only for this particular case, so rcu variant is just better for all the cases. Link: http://lkml.kernel.org/r/20190103150104.17128-4-rpenyaev@suse.de Signed-off-by: Roman Penyaev <rpenyaev@suse.de> Cc: Davidlohr Bueso <dbueso@suse.de> Cc: Jason Baron <jbaron@akamai.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-03-08epoll: make sure all elements in ready list are in FIFO orderRoman Penyaev1-1/+5
Patch series "use rwlock in order to reduce ep_poll_callback() contention", v3. The last patch targets the contention problem in ep_poll_callback(), which can be very well reproduced by generating events (write to pipe or eventfd) from many threads, while consumer thread does polling. The following are some microbenchmark results based on the test [1] which starts threads which generate N events each. The test ends when all events are successfully fetched by the poller thread: spinlock ======== threads events/ms run-time ms 8 6402 12495 16 7045 22709 32 7395 43268 rwlock + xchg ============= threads events/ms run-time ms 8 10038 7969 16 12178 13138 32 13223 24199 According to the results bandwidth of delivered events is significantly increased, thus execution time is reduced. This patch (of 4): All coming events are stored in FIFO order and this is also should be applicable to ->ovflist, which originally is stack, i.e. LIFO. Thus to keep correct FIFO order ->ovflist should reversed by adding elements to the head of the read list but not to the tail. Link: http://lkml.kernel.org/r/20190103150104.17128-2-rpenyaev@suse.de Signed-off-by: Roman Penyaev <rpenyaev@suse.de> Reviewed-by: Davidlohr Bueso <dbueso@suse.de> Cc: Jason Baron <jbaron@akamai.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-01-05Merge branch 'akpm' (patches from Andrew)Linus Torvalds1-100/+118
Merge more updates from Andrew Morton: - procfs updates - various misc bits - lib/ updates - epoll updates - autofs - fatfs - a few more MM bits * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (58 commits) mm/page_io.c: fix polled swap page in checkpatch: add Co-developed-by to signature tags docs: fix Co-Developed-by docs drivers/base/platform.c: kmemleak ignore a known leak fs: don't open code lru_to_page() fs/: remove caller signal_pending branch predictions mm/: remove caller signal_pending branch predictions arch/arc/mm/fault.c: remove caller signal_pending_branch predictions kernel/sched/: remove caller signal_pending branch predictions kernel/locking/mutex.c: remove caller signal_pending branch predictions mm: select HAVE_MOVE_PMD on x86 for faster mremap mm: speed up mremap by 20x on large regions mm: treewide: remove unused address argument from pte_alloc functions initramfs: cleanup incomplete rootfs scripts/gdb: fix lx-version string output kernel/kcov.c: mark write_comp_data() as notrace kernel/sysctl: add panic_print into sysctl panic: add options to print system info when panic happens bfs: extra sanity checking and static inode bitmap exec: separate MM_ANONPAGES and RLIMIT_STACK accounting ...
2019-01-05fs/epoll: deal with wait_queue only onceDavidlohr Bueso1-11/+18
There is no reason why we rearm the waitiqueue upon every fetch_events retry (for when events are found yet send_events() fails). If nothing else, this saves four lock operations per retry, and furthermore reduces the scope of the lock even further. [akpm@linux-foundation.org: restore code to original position, fix and reflow comment] Link: http://lkml.kernel.org/r/20181114182532.27981-2-dave@stgolabs.net Signed-off-by: Davidlohr Bueso <dbueso@suse.de> Cc: Jason Baron <jbaron@akamai.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-01-05fs/epoll: rename check_events label to send_eventsDavidlohr Bueso1-3/+3
It is currently called check_events because it, well, did exactly that. However, since the lockless ep_events_available() call, the label no longer checks, but just sends the events. Rename as such. Link: http://lkml.kernel.org/r/20181114182532.27981-1-dave@stgolabs.net Signed-off-by: Davidlohr Bueso <dbueso@suse.de> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Jason Baron <jbaron@akamai.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-01-05fs/epoll: avoid barrier after an epoll_wait(2) timeoutDavidlohr Bueso1-2/+6
Upon timeout, we can just exit out of the loop, without the cost of the changing the task's state with an smp_store_mb call. Just exit out of the loop and be done - setting the task state afterwards will be, of course, redundant. [dave@stgolabs.net: forgotten fixlets] Link: http://lkml.kernel.org/r/20181109155258.jxcr4t2pnz6zqct3@linux-r8p5 Link: http://lkml.kernel.org/r/20181108051006.18751-7-dave@stgolabs.net Signed-off-by: Davidlohr Bueso <dave@stgolabs.net> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Davidlohr Bueso <dbueso@suse.de> Cc: Jason Baron <jbaron@akamai.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-01-05fs/epoll: reduce the scope of wq lock in epoll_wait()Davidlohr Bueso1-54/+60
This patch aims at reducing ep wq.lock hold times in epoll_wait(2). For the blocking case, there is no need to constantly take and drop the spinlock, which is only needed to manipulate the waitqueue. The call to ep_events_available() is now lockless, and only exposed to benign races. Here, if false positive (returns available events and does not see another thread deleting an epi from the list) we call into send_events and then the list's state is correctly seen. Otoh, if a false negative and we don't see a list_add_tail(), for example, from irq callback, then it is rechecked again before blocking, which will see the correct state. In order for more accuracy to see concurrent list_del_init(), use the list_empty_careful() variant -- of course, this won't be safe against insertions from wakeup. For the overflow list we obviously need to prevent load/store tearing as we don't want to see partial values while the ready list is disabled. [dave@stgolabs.net: forgotten fixlets] Link: http://lkml.kernel.org/r/20181109155258.jxcr4t2pnz6zqct3@linux-r8p5 Link: http://lkml.kernel.org/r/20181108051006.18751-6-dave@stgolabs.net Signed-off-by: Davidlohr Bueso <dbueso@suse.de> Suggested-by: Jason Baron <jbaron@akamai.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-01-05fs/epoll: robustify ep->mtx held checksDavidlohr Bueso1-0/+2
Insted of just commenting how important it is, lets make it more robust and add a lockdep_assert_held() call. Link: http://lkml.kernel.org/r/20181108051006.18751-5-dave@stgolabs.net Signed-off-by: Davidlohr Bueso <dbueso@suse.de> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Jason Baron <jbaron@akamai.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-01-05fs/epoll: drop ovflist branch predictionDavidlohr Bueso1-1/+1
The ep->ovflist is a secondary ready-list to temporarily store events that might occur when doing sproc without holding the ep->wq.lock. This accounts for every time we check for ready events and also send events back to userspace; both callbacks, particularly the latter because of copy_to_user, can account for a non-trivial time. As such, the unlikely() check to see if the pointer is being used, seems both misleading and sub-optimal. In fact, we go to an awful lot of trouble to sync both lists, and populating the ovflist is far from an uncommon scenario. For example, profiling a concurrent epoll_wait(2) benchmark, with CONFIG_PROFILE_ANNOTATED_BRANCHES shows that for a two threads a 33% incorrect rate was seen; and when incrementally increasing the number of epoll instances (which is used, for example for multiple queuing load balancing models), up to a 90% incorrect rate was seen. Similarly, by deleting the prediction, 3% throughput boost was seen across incremental threads. Link: http://lkml.kernel.org/r/20181108051006.18751-4-dave@stgolabs.net Signed-off-by: Davidlohr Bueso <dbueso@suse.de> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Jason Baron <jbaron@akamai.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-01-05fs/epoll: simplify ep_send_events_proc() ready-list loopDavidlohr Bueso1-36/+37
The current logic is a bit convoluted. Lets simplify this with a standard list_for_each_entry_safe() loop instead and just break out after maxevents is reached. While at it, remove an unnecessary indentation level in the loop when there are in fact ready events. Link: http://lkml.kernel.org/r/20181108051006.18751-3-dave@stgolabs.net Signed-off-by: Davidlohr Bueso <dbueso@suse.de> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Jason Baron <jbaron@akamai.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-01-05fs/epoll: remove max_nests argument from ep_call_nested()Davidlohr Bueso1-8/+6
Patch series "epoll: some miscellaneous optimizations". The following are some incremental optimizations on some of the epoll core. Each patch has the details, but together, the series is seen to shave off measurable cycles on a number of systems and workloads. For example, on a 40-core IB, a pipetest as well as parallel epoll_wait() benchmark show around a 20-30% increase in raw operations per second when the box is fully occupied (incremental thread counts), and up to 15% performance improvement with lower counts. Passes ltp epoll related testcases. This patch(of 6): All callers pass the EP_MAX_NESTS constant already, so lets simplify this a tad and get rid of the redundant parameter for nested eventpolls. Link: http://lkml.kernel.org/r/20181108051006.18751-2-dave@stgolabs.net Signed-off-by: Davidlohr Bueso <dbueso@suse.de> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Jason Baron <jbaron@akamai.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-01-04Remove 'type' argument from access_ok() functionLinus Torvalds1-1/+1
Nobody has actually used the type (VERIFY_READ vs VERIFY_WRITE) argument of the user address range verification function since we got rid of the old racy i386-only code to walk page tables by hand. It existed because the original 80386 would not honor the write protect bit when in kernel mode, so you had to do COW by hand before doing any user access. But we haven't supported that in a long time, and these days the 'type' argument is a purely historical artifact. A discussion about extending 'user_access_begin()' to do the range checking resulted this patch, because there is no way we're going to move the old VERIFY_xyz interface to that model. And it's best done at the end of the merge window when I've done most of my merges, so let's just get this done once and for all. This patch was mostly done with a sed-script, with manual fix-ups for the cases that weren't of the trivial 'access_ok(VERIFY_xyz' form. There were a couple of notable cases: - csky still had the old "verify_area()" name as an alias. - the iter_iov code had magical hardcoded knowledge of the actual values of VERIFY_{READ,WRITE} (not that they mattered, since nothing really used it) - microblaze used the type argument for a debug printout but other than those oddities this should be a total no-op patch. I tried to fix up all architectures, did fairly extensive grepping for access_ok() uses, and the changes are trivial, but I may have missed something. Any missed conversion should be trivially fixable, though. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-12-06signal: Add restore_user_sigmask()Deepa Dinamani1-28/+2
Refactor the logic to restore the sigmask before the syscall returns into an api. This is useful for versions of syscalls that pass in the sigmask and expect the current->sigmask to be changed during the execution and restored after the execution of the syscall. With the advent of new y2038 syscalls in the subsequent patches, we add two more new versions of the syscalls (for pselect, ppoll and io_pgetevents) in addition to the existing native and compat versions. Adding such an api reduces the logic that would need to be replicated otherwise. Signed-off-by: Deepa Dinamani <deepa.kernel@gmail.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2018-12-06signal: Add set_user_sigmask()Deepa Dinamani1-16/+6
Refactor reading sigset from userspace and updating sigmask into an api. This is useful for versions of syscalls that pass in the sigmask and expect the current->sigmask to be changed during, and restored after, the execution of the syscall. With the advent of new y2038 syscalls in the subsequent patches, we add two more new versions of the syscalls (for pselect, ppoll, and io_pgetevents) in addition to the existing native and compat versions. Adding such an api reduces the logic that would need to be replicated otherwise. Note that the calls to sigprocmask() ignored the return value from the api as the function only returns an error on an invalid first argument that is hardcoded at these call sites. The updated logic uses set_current_blocked() instead. Signed-off-by: Deepa Dinamani <deepa.kernel@gmail.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2018-08-22fs/eventpoll.c: simplify ep_is_linked() callersDavidlohr Bueso1-8/+8
Instead of having each caller pass the rdllink explicitly, just have ep_is_linked() pass it while the callers just need the epi pointer. This helper is all about the rdllink, and this change, furthermore, improves the function's self documentation. Link: http://lkml.kernel.org/r/20180727053432.16679-3-dave@stgolabs.net Signed-off-by: Davidlohr Bueso <dbueso@suse.de> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Jason Baron <jbaron@akamai.com> Cc: Peter Zijlstra <peterz@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-08-22fs/eventpoll.c: loosen irq safety in ep_poll()Davidlohr Bueso1-6/+7
Similar to other calls, ep_poll() is not called with interrupts disabled, and we can therefore avoid the irq save/restore dance and just disable local irqs. In fact, the call should never be called in irq context at all, considering that the only path is epoll_wait(2) -> do_epoll_wait() -> ep_poll(). When running on a 2 socket 40-core (ht) IvyBridge a common pipe based epoll_wait(2) microbenchmark, the following performance improvements are seen: # threads vanilla dirty 1 1805587 2106412 2 1854064 2090762 4 1805484 2017436 8 1751222 1974475 16 1725299 1962104 32 1378463 1571233 64 787368 900784 Which is a pretty constantly near 15%. Also add a lockdep check such that we detect any mischief before deadlocking. Link: http://lkml.kernel.org/r/20180727053432.16679-2-dave@stgolabs.net Signed-off-by: Davidlohr Bueso <dbueso@suse.de> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Jason Baron <jbaron@akamai.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-08-22fs/eventpoll.c: simply CONFIG_NET_RX_BUSY_POLL ifdeferyDavidlohr Bueso1-7/+16
... 'tis easier on the eye. [akpm@linux-foundation.org: use inlines rather than macros] Link: http://lkml.kernel.org/r/20180725185620.11020-1-dave@stgolabs.net Signed-off-by: Davidlohr Bueso <dbueso@suse.de> Cc: Jason Baron <jbaron@akamai.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-08-22s/epoll: robustify irq safety with lockdep_assert_irqs_enabled()Davidlohr Bueso1-0/+8
Sprinkle lockdep_assert_irqs_enabled() checks in the functions that do not save and restore interrupts when dealing with the ep->wq.lock. These are ep_scan_ready_list() and those called by epoll_ctl(): ep_insert, ep_modify and ep_remove. [akpm@linux-foundation.org: remove too-obvious comments] Link: http://lkml.kernel.org/r/20180721183127.3busfa335zlcjeox@linux-r8p5 Signed-off-by: Davidlohr Bueso <dbueso@suse.de> Cc: Peter Zijlstra <peterz@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-08-22fs/epoll: loosen irq safety in epoll_insert() and epoll_remove()Davidlohr Bueso1-8/+6
Both functions are similar to the context of ep_modify(), called via epoll_ctl(2). Just like ep_modify(), saving and restoring interrupts is an overkill in these calls as it will never be called with irqs disabled. While ep_remove() can be called directly from EPOLL_CTL_DEL, it can also be called when releasing the file, but this also complies with the above. Link: http://lkml.kernel.org/r/20180720172956.2883-3-dave@stgolabs.net Signed-off-by: Davidlohr Bueso <dbueso@suse.de> Cc: Jason Baron <jbaron@akamai.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Peter Zijlstra <peterz@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-08-22fs/epoll: loosen irq safety in ep_scan_ready_list()Davidlohr Bueso1-5/+4
Patch series "fs/epoll: loosen irq safety when possible". Both patches replace saving+restoring interrupts when taking the ep->lock (now the waitqueue lock), with just disabling local irqs. This shows immediate performance benefits in patch 1 for an epoll workload running on Xen. The main concern we need to have with this sort of changes in epoll is the ep_poll_callback() which is passed to the wait queue wakeup and is done very often under irq context, this patch does not touch this call. Patches have been tested pretty heavily with the customer workload, microbenchmarks, ltp testcases and two high level workloads that use epoll under the hood: nginx and libevent benchmarks. This patch (of 2): Saving and restoring interrupts in ep_scan_ready_list() is an overkill as it is never called with interrupts disabled. Loosen this to simply disabling local irqs such that archs where managing irqs is expensive or virtual environments. This patch yields some throughput improvements on a workload that is epoll intensive running on a single Xen DomU. 1 Job 7500 --> 8800 enq/s (+17%) 2 Jobs 14000 --> 15200 enq/s (+8%) 3 Jobs 20500 --> 22300 enq/s (+8%) 4 Jobs 25000 --> 28000 enq/s (+8-12)% On bare metal: For a 2-socket 40-core (ht) IvyBridge on a few workloads, unfortunately I don't have a xen environment and the results for Xen I do have (which numbers are in patch 1) I don't have the actual workload, so cannot compare them directly. 1) Different configurations were used for a epoll_wait (pipes io) microbench (http://linux-scalability.org/epoll/epoll-test.c) and shows around a 7-10% improvement in overall total number of times the epoll_wait() loops when using both regular and nested epolls, so very raw numbers, but measurable nonetheless. # threads vanilla dirty 1 1677717 1805587 2 1660510 1854064 4 1610184 1805484 8 1577696 1751222 16 1568837 1725299 32 1291532 1378463 64 752584 787368 Note that stddev is pretty small. 2) Another pipe test, which shows no real measurable improvement. (http://www.xmailserver.org/linux-patches/pipetest.c) Link: http://lkml.kernel.org/r/20180720172956.2883-2-dave@stgolabs.net Signed-off-by: Davidlohr Bueso <dbueso@suse.de> Cc: Jason Baron <jbaron@akamai.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Peter Zijlstra <peterz@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-08-22epoll: use the waitqueue lock to protect ep->wqChristoph Hellwig1-36/+29
Patch series "waitqueue lockdep annotation", v3. This series adds a strategic lockdep_assert_held to __wake_up_common to ensure callers really do hold the wait_queue_head lock when calling the unlocked wake_up variants. It turns out epoll did not do this for a fairly common path (hit all the time by systemd during bootup), so the second patch fixed this instance as well. This patch (of 3): The epoll code currently uses the unlocked waitqueue helpers for managing ep->wq, but instead of holding the waitqueue lock around these calls, it uses its own ep->lock spinlock. Given that the waitqueue is not exposed to the rest of the kernel this actually works ok at the moment, but prevents the epoll locking rules from being enforced using lockdep. Remove ep->lock and use the waitqueue lock to not only reduce the size of struct eventpoll but also to make sure we can assert locking invariants in the waitqueue code. Link: http://lkml.kernel.org/r/20171214152344.6880-2-hch@lst.de Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Jason Baron <jbaron@akamai.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Mike Rapoport <rppt@linux.vnet.ibm.com> Cc: Jason Baron <jbaron@akamai.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Matthew Wilcox <willy@infradead.org> Cc: Davidlohr Bueso <dave@stgolabs.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-06-28Revert changes to convert to ->poll_mask() and aio IOCB_CMD_POLLLinus Torvalds1-10/+5
The poll() changes were not well thought out, and completely unexplained. They also caused a huge performance regression, because "->poll()" was no longer a trivial file operation that just called down to the underlying file operations, but instead did at least two indirect calls. Indirect calls are sadly slow now with the Spectre mitigation, but the performance problem could at least be largely mitigated by changing the "->get_poll_head()" operation to just have a per-file-descriptor pointer to the poll head instead. That gets rid of one of the new indirections. But that doesn't fix the new complexity that is completely unwarranted for the regular case. The (undocumented) reason for the poll() changes was some alleged AIO poll race fixing, but we don't make the common case slower and more complex for some uncommon special case, so this all really needs way more explanations and most likely a fundamental redesign. [ This revert is a revert of about 30 different commits, not reverted individually because that would just be unnecessarily messy - Linus ] Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Christoph Hellwig <hch@lst.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-06-15eventpoll: switch to ->poll_maskBen Noordhuis1-5/+10
Signed-off-by: Ben Noordhuis <info@bnoordhuis.nl> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2018-05-26fs: add new vfs_poll and file_can_poll helpersChristoph Hellwig1-3/+2
These abstract out calls to the poll method in preparation for changes in how we poll. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
2018-04-02fs: add do_epoll_*() helpers; remove internal calls to sys_epoll_*()Dominik Brodowski1-6/+17
Using the helper functions do_epoll_create() and do_epoll_wait() allows us to remove in-kernel calls to the related syscall functions. This patch is part of a series which removes in-kernel calls to syscalls. On this basis, the syscall entry path can be streamlined. For details, see http://lkml.kernel.org/r/20180325162527.GA17492@light.dominikbrodowski.net Cc: Alexander Viro <viro@zeniv.linux.org.uk> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2018-02-12vfs: do bulk POLL* -> EPOLL* replacementLinus Torvalds1-11/+11
This is the mindless scripted replacement of kernel use of POLL* variables as described by Al, done by this script: for V in IN OUT PRI ERR RDNORM RDBAND WRNORM WRBAND HUP RDHUP NVAL MSG; do L=`git grep -l -w POLL$V | grep -v '^t' | grep -v /um/ | grep -v '^sa' | grep -v '/poll.h$'|grep -v '^D'` for f in $L; do sed -i "-es/^\([^\"]*\)\(\<POLL$V\>\)/\\1E\\2/" $f; done done with de-mangling cleanups yet to come. NOTE! On almost all architectures, the EPOLL* constants have the same values as the POLL* constants do. But they keyword here is "almost". For various bad reasons they aren't the same, and epoll() doesn't actually work quite correctly in some cases due to this on Sparc et al. The next patch from Al will sort out the final differences, and we should be all done. Scripted-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-02-02annotate ep_scan_ready_list()Al Viro1-11/+13
make it always return __poll_t and have its callbacks do the same Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2018-02-02ep_send_events_proc(): return result via esed->resAl Viro1-7/+10
preparations for not mixing __poll_t and int in ep_scan_ready_list() Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2017-11-29eventpoll: no need to mask the result of epi_item_poll() againAl Viro1-7/+2
two callers that do so don't need to bother - we'd already masked it with epi->event.events, which * couldn't have changed since we are holding ->mtx * had been set to event->events * is still equal to event->events, since *event is never changed by anything. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2017-11-29eventpoll: constify struct epoll_event pointersAl Viro1-3/+5
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2017-11-28fs: annotate ->poll() instancesAl Viro1-1/+1
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2017-11-28annotate poll-related wait keysAl Viro1-4/+5
__poll_t is also used as wait key in some waitqueues. Verify that wait_..._poll() gets __poll_t as key and provide a helper for wakeup functions to get back to that __poll_t value. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2017-11-18Merge branch 'akpm' (patches from Andrew)Linus Torvalds1-76/+55
Merge more updates from Andrew Morton: - a bit more MM - procfs updates - dynamic-debug fixes - lib/ updates - checkpatch - epoll - nilfs2 - signals - rapidio - PID management cleanup and optimization - kcov updates - sysvipc updates - quite a few misc things all over the place * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (94 commits) EXPERT Kconfig menu: fix broken EXPERT menu include/asm-generic/topology.h: remove unused parent_node() macro arch/tile/include/asm/topology.h: remove unused parent_node() macro arch/sparc/include/asm/topology_64.h: remove unused parent_node() macro arch/sh/include/asm/topology.h: remove unused parent_node() macro arch/ia64/include/asm/topology.h: remove unused parent_node() macro drivers/pcmcia/sa1111_badge4.c: avoid unused function warning mm: add infrastructure for get_user_pages_fast() benchmarking sysvipc: make get_maxid O(1) again sysvipc: properly name ipc_addid() limit parameter sysvipc: duplicate lock comments wrt ipc_addid() sysvipc: unteach ids->next_id for !CHECKPOINT_RESTORE initramfs: use time64_t timestamps drivers/watchdog: make use of devm_register_reboot_notifier() kernel/reboot.c: add devm_register_reboot_notifier() kcov: update documentation Makefile: support flag -fsanitizer-coverage=trace-cmp kcov: support comparison operands collection kcov: remove pointless current != NULL check kernel/panic.c: add TAINT_AUX ...
2017-11-18epoll: remove ep_call_nested() from ep_eventpoll_poll()Jason Baron1-45/+35
The use of ep_call_nested() in ep_eventpoll_poll(), which is the .poll routine for an epoll fd, is used to prevent excessively deep epoll nesting, and to prevent circular paths. However, we are already preventing these conditions during EPOLL_CTL_ADD. In terms of too deep epoll chains, we do in fact allow deep nesting of the epoll fds themselves (deeper than EP_MAX_NESTS), however we don't allow more than EP_MAX_NESTS when an epoll file descriptor is actually connected to a wakeup source. Thus, we do not require the use of ep_call_nested(), since ep_eventpoll_poll(), which is called via ep_scan_ready_list() only continues nesting if there are events available. Since ep_call_nested() is implemented using a global lock, applications that make use of nested epoll can see large performance improvements with this change. Davidlohr said: : Improvements are quite obscene actually, such as for the following : epoll_wait() benchmark with 2 level nesting on a 80 core IvyBridge: : : ncpus vanilla dirty delta : 1 2447092 3028315 +23.75% : 4 231265 2986954 +1191.57% : 8 121631 2898796 +2283.27% : 16 59749 2902056 +4757.07% : 32 26837 2326314 +8568.30% : 64 12926 1341281 +10276.61% : : (http://linux-scalability.org/epoll/epoll-test.c) Link: http://lkml.kernel.org/r/1509430214-5599-1-git-send-email-jbaron@akamai.com Signed-off-by: Jason Baron <jbaron@akamai.com> Cc: Davidlohr Bueso <dave@stgolabs.net> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Salman Qazi <sqazi@google.com> Cc: Hou Tao <houtao1@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-11-18epoll: avoid calling ep_call_nested() from ep_poll_safewake()Jason Baron1-29/+18
ep_poll_safewake() is used to wakeup potentially nested epoll file descriptors. The function uses ep_call_nested() to prevent entering the same wake up queue more than once, and to prevent excessively deep wakeup paths (deeper than EP_MAX_NESTS). However, this is not necessary since we are already preventing these conditions during EPOLL_CTL_ADD. This saves extra function calls, and avoids taking a global lock during the ep_call_nested() calls. I have, however, left ep_call_nested() for the CONFIG_DEBUG_LOCK_ALLOC case, since ep_call_nested() keeps track of the nesting level, and this is required by the call to spin_lock_irqsave_nested(). It would be nice to remove the ep_call_nested() calls for the CONFIG_DEBUG_LOCK_ALLOC case as well, however its not clear how to simply pass the nesting level through multiple wake_up() levels without more surgery. In any case, I don't think CONFIG_DEBUG_LOCK_ALLOC is generally used for production. This patch, also apparently fixes a workload at Google that Salman Qazi reported by completely removing the poll_safewake_ncalls->lock from wakeup paths. Link: http://lkml.kernel.org/r/1507920533-8812-1-git-send-email-jbaron@akamai.com Signed-off-by: Jason Baron <jbaron@akamai.com> Acked-by: Davidlohr Bueso <dbueso@suse.de> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Salman Qazi <sqazi@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-11-18epoll: account epitem and eppoll_entry to kmemcgShakeel Butt1-2/+2
A userspace application can directly trigger the allocations from eventpoll_epi and eventpoll_pwq slabs. A buggy or malicious application can consume a significant amount of system memory by triggering such allocations. Indeed we have seen in production where a buggy application was leaking the epoll references and causing a burst of eventpoll_epi and eventpoll_pwq slab allocations. This patch opt-in the charging of eventpoll_epi and eventpoll_pwq slabs. There is a per-user limit (~4% of total memory if no highmem) on these caches. I think it is too generous particularly in the scenario where jobs of multiple users are running on the system and the administrator is reducing cost by overcomitting the memory. This is unaccounted kernel memory and will not be considered by the oom-killer. I think by accounting it to kmemcg, for systems with kmem accounting enabled, we can provide better isolation between jobs of different users. Link: http://lkml.kernel.org/r/20171003021519.23907-1-shakeelb@google.com Signed-off-by: Shakeel Butt <shakeelb@google.com> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Greg Thelen <gthelen@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-09-20get_compat_sigset()Al Viro1-3/+1
similar to put_compat_sigset() Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2017-09-09fs/epoll: use faster rb_first_cached()Davidlohr Bueso1-14/+16
... such that we can avoid the tree walks to get the node with the smallest key. Semantically the same, as the previously used rb_first(), but O(1). The main overhead is the extra footprint for the cached rb_node pointer, which should not matter for epoll. Link: http://lkml.kernel.org/r/20170719014603.19029-15-dave@stgolabs.net Signed-off-by: Davidlohr Bueso <dbueso@suse.de> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Jan Kara <jack@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-09-01epoll: fix race between ep_poll_callback(POLLFREE) and ep_free()/ep_remove()Oleg Nesterov1-16/+26
The race was introduced by me in commit 971316f0503a ("epoll: ep_unregister_pollwait() can use the freed pwq->whead"). I did not realize that nothing can protect eventpoll after ep_poll_callback() sets ->whead = NULL, only whead->lock can save us from the race with ep_free() or ep_remove(). Move ->whead = NULL to the end of ep_poll_callback() and add the necessary barriers. TODO: cleanup the ewake/EPOLLEXCLUSIVE logic, it was confusing even before this patch. Hopefully this explains use-after-free reported by syzcaller: BUG: KASAN: use-after-free in debug_spin_lock_before ... _raw_spin_lock_irqsave+0x4a/0x60 kernel/locking/spinlock.c:159 ep_poll_callback+0x29f/0xff0 fs/eventpoll.c:1148 this is spin_lock(eventpoll->lock), ... Freed by task 17774: ... kfree+0xe8/0x2c0 mm/slub.c:3883 ep_free+0x22c/0x2a0 fs/eventpoll.c:865 Fixes: 971316f0503a ("epoll: ep_unregister_pollwait() can use the freed pwq->whead") Reported-by: 范龙飞 <long7573@126.com> Cc: stable@vger.kernel.org Signed-off-by: Oleg Nesterov <oleg@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-07-13kcmp: fs/epoll: wrap kcmp code with CONFIG_CHECKPOINT_RESTORECyrill Gorcunov1-0/+2
kcmp syscall is build iif CONFIG_CHECKPOINT_RESTORE is selected, so wrap appropriate helpers in epoll code with the config to build it conditionally. Link: http://lkml.kernel.org/r/20170513083456.GG1881@uranus.lan Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org> Reported-by: Andrew Morton <akpm@linuxfoundation.org> Cc: Andrey Vagin <avagin@openvz.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Pavel Emelyanov <xemul@virtuozzo.com> Cc: Michael Kerrisk <mtk.manpages@gmail.com> Cc: Jason Baron <jbaron@akamai.com> Cc: Andy Lutomirski <luto@amacapital.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-07-13kcmp: add KCMP_EPOLL_TFD mode to compare epoll target filesCyrill Gorcunov1-0/+42
With current epoll architecture target files are addressed with file_struct and file descriptor number, where the last is not unique. Moreover files can be transferred from another process via unix socket, added into queue and closed then so we won't find this descriptor in the task fdinfo list. Thus to checkpoint and restore such processes CRIU needs to find out where exactly the target file is present to add it into epoll queue. For this sake one can use kcmp call where some particular target file from the queue is compared with arbitrary file passed as an argument. Because epoll target files can have same file descriptor number but different file_struct a caller should explicitly specify the offset within. To test if some particular file is matching entry inside epoll one have to - fill kcmp_epoll_slot structure with epoll file descriptor, target file number and target file offset (in case if only one target is present then it should be 0) - call kcmp as kcmp(pid1, pid2, KCMP_EPOLL_TFD, fd, &kcmp_epoll_slot) - the kernel fetch file pointer matching file descriptor @fd of pid1 - lookups for file struct in epoll queue of pid2 and returns traditional 0,1,2 result for sorting purpose Link: http://lkml.kernel.org/r/20170424154423.511592110@gmail.com Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org> Acked-by: Andrey Vagin <avagin@openvz.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Pavel Emelyanov <xemul@virtuozzo.com> Cc: Michael Kerrisk <mtk.manpages@gmail.com> Cc: Jason Baron <jbaron@akamai.com> Cc: Andy Lutomirski <luto@amacapital.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-07-13procfs: fdinfo: extend information about epoll target filesCyrill Gorcunov1-2/+6
Since it is possbile to have same number in tfd field (say file added, closed, then nother file dup'ed to same number and added back) it is imposible to distinguish such target files solely by their numbers. Strictly speaking regular applications don't need to recognize these targets at all but for checkpoint/restore sake we need to collect targets to be able to push them back on restore stage in a proper order. Thus lets add file position, inode and device number where this target lays. This three fields can be used as a primary key for sorting, and together with kcmp help CRIU can find out an exact file target (from the whole set of processes being checkpointed). Link: http://lkml.kernel.org/r/20170424154423.436491881@gmail.com Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org> Acked-by: Andrei Vagin <avagin@virtuozzo.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Pavel Emelyanov <xemul@virtuozzo.com> Cc: Michael Kerrisk <mtk.manpages@gmail.com> Cc: Jason Baron <jbaron@akamai.com> Cc: Andy Lutomirski <luto@amacapital.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-07-11fs, epoll: short circuit fetching events if thread has been killedDavid Rientjes1-0/+10
We've encountered zombies that are waiting for a thread to exit that are looping in ep_poll() almost endlessly although there is a pending SIGKILL as a result of a group exit. This happens because we always find ep_events_available() and fetch more events and never are able to check for signal_pending() that would break from the loop and return -EINTR. Special case fatal signals and break immediately to guarantee that we loop to fetch more events and delay making a timely exit. It would also be possible to simply move the check for signal_pending() higher than checking for ep_events_available(), but there have been no reports of delayed signal handling other than SIGKILL preventing zombies from exiting that would be fixed by this. It fixes an issue for us where we have witnessed zombies sticking around for at least O(minutes), but considering the code has been like this forever and nobody else has complained that I have found, I would simply queue it up for 4.12. Link: http://lkml.kernel.org/r/alpine.DEB.2.10.1705031722350.76784@chino.kir.corp.google.com Signed-off-by: David Rientjes <rientjes@google.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Jan Kara <jack@suse.cz> Cc: Davide Libenzi <davidel@xmailserver.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-06-20sched/wait: Disambiguate wq_entry->task_list and wq_head->task_list namingIngo Molnar1-1/+1
So I've noticed a number of instances where it was not obvious from the code whether ->task_list was for a wait-queue head or a wait-queue entry. Furthermore, there's a number of wait-queue users where the lists are not for 'tasks' but other entities (poll tables, etc.), in which case the 'task_list' name is actively confusing. To clear this all up, name the wait-queue head and entry list structure fields unambiguously: struct wait_queue_head::task_list => ::head struct wait_queue_entry::task_list => ::entry For example, this code: rqw->wait.task_list.next != &wait->task_list ... is was pretty unclear (to me) what it's doing, while now it's written this way: rqw->wait.head.next != &wait->entry ... which makes it pretty clear that we are iterating a list until we see the head. Other examples are: list_for_each_entry_safe(pos, next, &x->task_list, task_list) { list_for_each_entry(wq, &fence->wait.task_list, task_list) { ... where it's unclear (to me) what we are iterating, and during review it's hard to tell whether it's trying to walk a wait-queue entry (which would be a bug), while now it's written as: list_for_each_entry_safe(pos, next, &x->head, entry) { list_for_each_entry(wq, &fence->wait.head, entry) { Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>