summaryrefslogtreecommitdiff
path: root/fs/f2fs/debug.c
AgeCommit message (Collapse)AuthorFilesLines
2024-03-04f2fs: introduce SEGS_TO_BLKS/BLKS_TO_SEGS for cleanupChao Yu1-4/+3
Just cleanup, no functional change. Signed-off-by: Chao Yu <chao@kernel.org> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2024-02-27f2fs: use BLKS_PER_SEG, BLKS_PER_SEC, and SEGS_PER_SECJaegeuk Kim1-3/+3
No functional change. Reviewed-by: Daeho Jeong <daehojeong@google.com> Reviewed-by: Chao Yu <chao@kernel.org> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2023-08-14f2fs: fix to account cp stats correctlyChao Yu1-1/+8
cp_foreground_calls sysfs entry shows total CP call count rather than foreground CP call count, fix it. Fixes: fc7100ea2a52 ("f2fs: Add f2fs stats to sysfs") Signed-off-by: Chao Yu <chao@kernel.org> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2023-08-14f2fs: fix to account gc stats correctlyChao Yu1-6/+18
As reported, status debugfs entry shows inconsistent GC stats as below: GC calls: 6008 (BG: 6161) - data segments : 3053 (BG: 3053) - node segments : 2955 (BG: 2955) Total GC calls is larger than BGGC calls, the reason is: - f2fs_stat_info.call_count accounts total migrated section count by f2fs_gc() - f2fs_stat_info.bg_gc accounts total call times of f2fs_gc() from background gc_thread Another issue is gc_foreground_calls sysfs entry shows total GC call count rather than FGGC call count. This patch changes as below for fix: - account GC calls and migrated segment count separately - support to account migrated section count if it enables large section mode - fix to show correct value in gc_foreground_calls sysfs entry Fixes: fc7100ea2a52 ("f2fs: Add f2fs stats to sysfs") Signed-off-by: Chao Yu <chao@kernel.org> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2023-04-13f2fs: fix to recover quota data correctlyChao Yu1-0/+1
With -O quota mkfs option, xfstests generic/417 fails due to fsck detects data corruption on quota inodes. [ASSERT] (fsck_chk_quota_files:2051) --> Quota file is missing or invalid quota file content found. The root cause is there is a hole f2fs doesn't hold quota inodes, so all recovered quota data will be dropped due to SBI_POR_DOING flag was set. - f2fs_fill_super - f2fs_recover_orphan_inodes - f2fs_enable_quota_files - f2fs_quota_off_umount <--- quota inodes were dropped ---> - f2fs_recover_fsync_data - f2fs_enable_quota_files - f2fs_quota_off_umount This patch tries to eliminate the hole by holding quota inodes during entire recovery flow as below: - f2fs_fill_super - f2fs_recover_quota_begin - f2fs_recover_orphan_inodes - f2fs_recover_fsync_data - f2fs_recover_quota_end Then, recovered quota data can be persisted after SBI_POR_DOING is cleared. Signed-off-by: Chao Yu <chao@kernel.org> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2023-03-30f2fs: convert to MAX_SBI_FLAG instead of 32 in stat_show()Yangtao Li1-18/+18
BIW reduce the s_flag array size and make s_flag constant. Signed-off-by: Yangtao Li <frank.li@vivo.com> Reviewed-by: Chao Yu <chao@kernel.org> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2023-02-14f2fs: replace si->sbi w/ sbi in stat_show()Yangtao Li1-21/+23
For each loop add a local f2fs_sb_info pointer insted of looking it up. Signed-off-by: Yangtao Li <frank.li@vivo.com> Reviewed-by: Chao Yu <chao@kernel.org> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2023-02-14f2fs: export ipu policy in debugfsYangtao Li1-0/+24
Export ipu_policy as a string in debugfs for better readability and it can help us better understand some strategies of the file system. Signed-off-by: Yangtao Li <frank.li@vivo.com> Reviewed-by: Chao Yu <chao@kernel.org> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2022-12-13f2fs: fix some format WARNING in debug.c and sysfs.cYangtao Li1-22/+23
To fix: WARNING: function definition argument 'struct f2fs_attr *' should also have an identifier name + ssize_t (*show)(struct f2fs_attr *, struct f2fs_sb_info *, char *); WARNING: return sysfs_emit(...) formats should include a terminating newline + return sysfs_emit(buf, "(none)"); WARNING: Prefer 'unsigned int' to bare use of 'unsigned' + unsigned npages = NODE_MAPPING(sbi)->nrpages; WARNING: Missing a blank line after declarations + unsigned npages = COMPRESS_MAPPING(sbi)->nrpages; + si->page_mem += (unsigned long long)npages << PAGE_SHIFT; WARNING: quoted string split across lines + seq_printf(s, "CP merge (Queued: %4d, Issued: %4d, Total: %4d, " + "Cur time: %4d(ms), Peak time: %4d(ms))\n", Signed-off-by: Yangtao Li <frank.li@vivo.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2022-12-13f2fs: add block_age-based extent cacheJaegeuk Kim1-0/+21
This patch introduces a runtime hot/cold data separation method for f2fs, in order to improve the accuracy for data temperature classification, reduce the garbage collection overhead after long-term data updates. Enhanced hot/cold data separation can record data block update frequency as "age" of the extent per inode, and take use of the age info to indicate better temperature type for data block allocation: - It records total data blocks allocated since mount; - When file extent has been updated, it calculate the count of data blocks allocated since last update as the age of the extent; - Before the data block allocated, it searches for the age info and chooses the suitable segment for allocation. Test and result: - Prepare: create about 30000 files * 3% for cold files (with cold file extension like .apk, from 3M to 10M) * 50% for warm files (with random file extension like .FcDxq, from 1K to 4M) * 47% for hot files (with hot file extension like .db, from 1K to 256K) - create(5%)/random update(90%)/delete(5%) the files * total write amount is about 70G * fsync will be called for .db files, and buffered write will be used for other files The storage of test device is large enough(128G) so that it will not switch to SSR mode during the test. Benefit: dirty segment count increment reduce about 14% - before: Dirty +21110 - after: Dirty +18286 Signed-off-by: qixiaoyu1 <qixiaoyu1@xiaomi.com> Signed-off-by: xiongping1 <xiongping1@xiaomi.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2022-12-13f2fs: refactor extent_cache to support for read and moreJaegeuk Kim1-21/+44
This patch prepares extent_cache to be ready for addition. Reviewed-by: Chao Yu <chao@kernel.org> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2022-10-07f2fs: change to use atomic_t type form sbi.atomic_filesChao Yu1-1/+2
inode_lock[ATOMIC_FILE] was used for protecting sbi->atomic_files, update atomic_files variable's type to atomic_t instead of unsigned int, then inode_lock[ATOMIC_FILE] can be obsoleted. Signed-off-by: Chao Yu <chao@kernel.org> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2022-10-07f2fs: account swapfile inodesChao Yu1-0/+4
In order to check count of opened swapfile inodes. Signed-off-by: Chao Yu <chao.yu@oppo.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2022-10-04f2fs: code clean and fix a type errorZhang Qilong1-1/+1
ERROR: code indent should use tabs where possible ERROR: spaces required around that ':' ERROR: incorrect tab Found serveral code type errors when review the code and fix it. There is no function change. Signed-off-by: Zhang Qilong <zhangqilong3@huawei.com> Reviewed-by: Chao Yu <chao@kernel.org> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2022-07-31f2fs: adjust zone capacity when considering valid block countJaegeuk Kim1-1/+1
This patch fixes counting unusable blocks set by zone capacity when checking the valid block count in a section. Reviewed-by: Chao Yu <chao@kernel.org> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2022-05-12f2fs: kill volatile write supportJaegeuk Kim1-8/+2
There's no user, since all can use atomic writes simply. Let's kill it. Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2022-05-12f2fs: change the current atomic write wayDaeho Jeong1-10/+2
Current atomic write has three major issues like below. - keeps the updates in non-reclaimable memory space and they are even hard to be migrated, which is not good for contiguous memory allocation. - disk spaces used for atomic files cannot be garbage collected, so this makes it difficult for the filesystem to be defragmented. - If atomic write operations hit the threshold of either memory usage or garbage collection failure count, All the atomic write operations will fail immediately. To resolve the issues, I will keep a COW inode internally for all the updates to be flushed from memory, when we need to flush them out in a situation like high memory pressure. These COW inodes will be tagged as orphan inodes to be reclaimed in case of sudden power-cut or system failure during atomic writes. Signed-off-by: Daeho Jeong <daehojeong@google.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2022-03-17f2fs: introduce gc_urgent_mid modeDaeho Jeong1-1/+3
We need a mid level of gc urgent mode to do GC forcibly in a period of given gc_urgent_sleep_time, but not like using greedy GC approach and switching to SSR mode such as gc urgent high mode. This can be used for more aggressive periodic storage clean up. Signed-off-by: Daeho Jeong <daehojeong@google.com> Reviewed-by: Chao Yu <chao@kernel.org> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2022-03-17f2fs: use spin_lock to avoid hangJaegeuk Kim1-7/+10
[14696.634553] task:cat state:D stack: 0 pid:1613738 ppid:1613735 flags:0x00000004 [14696.638285] Call Trace: [14696.639038] <TASK> [14696.640032] __schedule+0x302/0x930 [14696.640969] schedule+0x58/0xd0 [14696.641799] schedule_preempt_disabled+0x18/0x30 [14696.642890] __mutex_lock.constprop.0+0x2fb/0x4f0 [14696.644035] ? mod_objcg_state+0x10c/0x310 [14696.645040] ? obj_cgroup_charge+0xe1/0x170 [14696.646067] __mutex_lock_slowpath+0x13/0x20 [14696.647126] mutex_lock+0x34/0x40 [14696.648070] stat_show+0x25/0x17c0 [f2fs] [14696.649218] seq_read_iter+0x120/0x4b0 [14696.650289] ? aa_file_perm+0x12a/0x500 [14696.651357] ? lru_cache_add+0x1c/0x20 [14696.652470] seq_read+0xfd/0x140 [14696.653445] full_proxy_read+0x5c/0x80 [14696.654535] vfs_read+0xa0/0x1a0 [14696.655497] ksys_read+0x67/0xe0 [14696.656502] __x64_sys_read+0x1a/0x20 [14696.657580] do_syscall_64+0x3b/0xc0 [14696.658671] entry_SYSCALL_64_after_hwframe+0x44/0xae [14696.660068] RIP: 0033:0x7efe39df1cb2 [14696.661133] RSP: 002b:00007ffc8badd948 EFLAGS: 00000246 ORIG_RAX: 0000000000000000 [14696.662958] RAX: ffffffffffffffda RBX: 0000000000020000 RCX: 00007efe39df1cb2 [14696.664757] RDX: 0000000000020000 RSI: 00007efe399df000 RDI: 0000000000000003 [14696.666542] RBP: 00007efe399df000 R08: 00007efe399de010 R09: 00007efe399de010 [14696.668363] R10: 0000000000000022 R11: 0000000000000246 R12: 0000000000000000 [14696.670155] R13: 0000000000000003 R14: 0000000000020000 R15: 0000000000020000 [14696.671965] </TASK> [14696.672826] task:umount state:D stack: 0 pid:1614985 ppid:1614984 flags:0x00004000 [14696.674930] Call Trace: [14696.675903] <TASK> [14696.676780] __schedule+0x302/0x930 [14696.677927] schedule+0x58/0xd0 [14696.679019] schedule_preempt_disabled+0x18/0x30 [14696.680412] __mutex_lock.constprop.0+0x2fb/0x4f0 [14696.681783] ? destroy_inode+0x65/0x80 [14696.683006] __mutex_lock_slowpath+0x13/0x20 [14696.684305] mutex_lock+0x34/0x40 [14696.685442] f2fs_destroy_stats+0x1e/0x60 [f2fs] [14696.686803] f2fs_put_super+0x158/0x390 [f2fs] [14696.688238] generic_shutdown_super+0x7a/0x120 [14696.689621] kill_block_super+0x27/0x50 [14696.690894] kill_f2fs_super+0x7f/0x100 [f2fs] [14696.692311] deactivate_locked_super+0x35/0xa0 [14696.693698] deactivate_super+0x40/0x50 [14696.694985] cleanup_mnt+0x139/0x190 [14696.696209] __cleanup_mnt+0x12/0x20 [14696.697390] task_work_run+0x64/0xa0 [14696.698587] exit_to_user_mode_prepare+0x1b7/0x1c0 [14696.700053] syscall_exit_to_user_mode+0x27/0x50 [14696.701418] do_syscall_64+0x48/0xc0 [14696.702630] entry_SYSCALL_64_after_hwframe+0x44/0xae Reviewed-by: Chao Yu <chao@kernel.org> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2022-03-11f2fs: don't get FREEZE lock in f2fs_evict_inode in frozen fsJaegeuk Kim1-0/+1
Let's purge inode cache in order to avoid the below deadlock. [freeze test] shrinkder freeze_super - pwercpu_down_write(SB_FREEZE_FS) - super_cache_scan - down_read(&sb->s_umount) - prune_icache_sb - dispose_list - evict - f2fs_evict_inode thaw_super - down_write(&sb->s_umount); - __percpu_down_read(SB_FREEZE_FS) Reviewed-by: Chao Yu <chao@kernel.org> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2022-02-12f2fs: add a way to limit roll forward recovery timeJaegeuk Kim1-0/+3
This adds a sysfs entry to call checkpoint during fsync() in order to avoid long elapsed time to run roll-forward recovery when booting the device. Default value doesn't enforce the limitation which is same as before. Reviewed-by: Chao Yu <chao@kernel.org> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2021-08-17f2fs: convert S_IRUGO to 0444Yangtao Li1-1/+1
To fix: WARNING: Symbolic permissions 'S_IRUGO' are not preferred. Consider using octal permissions '0444'. Signed-off-by: Yangtao Li <frank.li@vivo.com> Reviewed-by: Chao Yu <chao@kernel.org> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2021-08-13f2fs: improve sbi status info in debugfs/f2fs/statusYangtao Li1-5/+26
Do not use numbers but strings to improve readability when flag is set. Signed-off-by: Yangtao Li <frank.li@vivo.com> Reviewed-by: Chao Yu <chao@kernel.org> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2021-08-02f2fs: show sbi status in debugfs/f2fs/statusJaegeuk Kim1-2/+3
We need to get sbi->s_flag to understand the current f2fs status as well. One example is SBI_NEED_FSCK. Reviewed-by: Chao Yu <chao@kernel.org> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2021-07-14f2fs: add sysfs nodes to get GC info for each GC modeDaeho Jeong1-0/+9
Added gc_reclaimed_segments and gc_segment_mode sysfs nodes. 1) "gc_reclaimed_segments" shows how many segments have been reclaimed by GC during a specific GC mode. 2) "gc_segment_mode" is used to control for which gc mode the "gc_reclaimed_segments" node shows. Signed-off-by: Daeho Jeong <daehojeong@google.com> Reviewed-by: Chao Yu <chao@kernel.org> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2021-06-23f2fs: compress: add compress_inode to cache compressed blocksChao Yu1-0/+13
Support to use address space of inner inode to cache compressed block, in order to improve cache hit ratio of random read. Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2021-04-10f2fs: clean up build warningsYi Zhuang1-0/+3
This patch combined the below three clean-up patches. - modify open brace '{' following function definitions - ERROR: spaces required around that ':' - ERROR: spaces required before the open parenthesis '(' - ERROR: spaces prohibited before that ',' - Made suggested modifications from checkpatch in reference to WARNING: Missing a blank line after declarations Signed-off-by: Yi Zhuang <zhuangyi1@huawei.com> Signed-off-by: Jia Yang <jiayang5@huawei.com> Signed-off-by: Jack Qiu <jack.qiu@huawei.com> Reviewed-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2021-02-04f2fs: introduce checkpoint_merge mount optionDaeho Jeong1-0/+12
We've added a new mount options, "checkpoint_merge" and "nocheckpoint_merge", which creates a kernel daemon and makes it to merge concurrent checkpoint requests as much as possible to eliminate redundant checkpoint issues. Plus, we can eliminate the sluggish issue caused by slow checkpoint operation when the checkpoint is done in a process context in a cgroup having low i/o budget and cpu shares. To make this do better, we set the default i/o priority of the kernel daemon to "3", to give one higher priority than other kernel threads. The below verification result explains this. The basic idea has come from https://opensource.samsung.com. [Verification] Android Pixel Device(ARM64, 7GB RAM, 256GB UFS) Create two I/O cgroups (fg w/ weight 100, bg w/ wight 20) Set "strict_guarantees" to "1" in BFQ tunables In "fg" cgroup, - thread A => trigger 1000 checkpoint operations "for i in `seq 1 1000`; do touch test_dir1/file; fsync test_dir1; done" - thread B => gererating async. I/O "fio --rw=write --numjobs=1 --bs=128k --runtime=3600 --time_based=1 --filename=test_img --name=test" In "bg" cgroup, - thread C => trigger repeated checkpoint operations "echo $$ > /dev/blkio/bg/tasks; while true; do touch test_dir2/file; fsync test_dir2; done" We've measured thread A's execution time. [ w/o patch ] Elapsed Time: Avg. 68 seconds [ w/ patch ] Elapsed Time: Avg. 48 seconds Reported-by: kernel test robot <lkp@intel.com> Reported-by: Dan Carpenter <dan.carpenter@oracle.com> [Jaegeuk Kim: fix the return value in f2fs_start_ckpt_thread, reported by Dan] Signed-off-by: Daeho Jeong <daehojeong@google.com> Signed-off-by: Sungjong Seo <sj1557.seo@samsung.com> Reviewed-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2020-12-03f2fs: avoid race condition for shrinker countJaegeuk Kim1-5/+6
Light reported sometimes shinker gets nat_cnt < dirty_nat_cnt resulting in wrong do_shinker work. Let's avoid to return insane overflowed value by adding single tracking value. Reported-by: Light Hsieh <Light.Hsieh@mediatek.com> Reviewed-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2020-09-14f2fs: clean up kvfreeChao Yu1-1/+1
After commit 0b6d4ca04a86 ("f2fs: don't return vmalloc() memory from f2fs_kmalloc()"), f2fs_k{m,z}alloc() will not return vmalloc()'ed memory, so clean up to use kfree() instead of kvfree() to free vmalloc()'ed memory. Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2020-09-11f2fs: change compr_blocks of superblock info to 64bitDaeho Jeong1-3/+3
Current compr_blocks of superblock info is not 64bit value. We are accumulating each i_compr_blocks count of inodes to this value and those are 64bit values. So, need to change this to 64bit value. Signed-off-by: Daeho Jeong <daehojeong@google.com> Reviewed-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2020-09-11f2fs: support age threshold based garbage collectionChao Yu1-0/+4
There are several issues in current background GC algorithm: - valid blocks is one of key factors during cost overhead calculation, so if segment has less valid block, however even its age is young or it locates hot segment, CB algorithm will still choose the segment as victim, it's not appropriate. - GCed data/node will go to existing logs, no matter in-there datas' update frequency is the same or not, it may mix hot and cold data again. - GC alloctor mainly use LFS type segment, it will cost free segment more quickly. This patch introduces a new algorithm named age threshold based garbage collection to solve above issues, there are three steps mainly: 1. select a source victim: - set an age threshold, and select candidates beased threshold: e.g. 0 means youngest, 100 means oldest, if we set age threshold to 80 then select dirty segments which has age in range of [80, 100] as candiddates; - set candidate_ratio threshold, and select candidates based the ratio, so that we can shrink candidates to those oldest segments; - select target segment with fewest valid blocks in order to migrate blocks with minimum cost; 2. select a target victim: - select candidates beased age threshold; - set candidate_radius threshold, search candidates whose age is around source victims, searching radius should less than the radius threshold. - select target segment with most valid blocks in order to avoid migrating current target segment. 3. merge valid blocks from source victim into target victim with SSR alloctor. Test steps: - create 160 dirty segments: * half of them have 128 valid blocks per segment * left of them have 384 valid blocks per segment - run background GC Benefit: GC count and block movement count both decrease obviously: - Before: - Valid: 86 - Dirty: 1 - Prefree: 11 - Free: 6001 (6001) GC calls: 162 (BG: 220) - data segments : 160 (160) - node segments : 2 (2) Try to move 41454 blocks (BG: 41454) - data blocks : 40960 (40960) - node blocks : 494 (494) IPU: 0 blocks SSR: 0 blocks in 0 segments LFS: 41364 blocks in 81 segments - After: - Valid: 87 - Dirty: 0 - Prefree: 4 - Free: 6008 (6008) GC calls: 75 (BG: 76) - data segments : 74 (74) - node segments : 1 (1) Try to move 12813 blocks (BG: 12813) - data blocks : 12544 (12544) - node blocks : 269 (269) IPU: 0 blocks SSR: 12032 blocks in 77 segments LFS: 855 blocks in 2 segments Signed-off-by: Chao Yu <yuchao0@huawei.com> [Jaegeuk Kim: fix a bug along with pinfile in-mem segment & clean up] Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2020-09-11f2fs: introduce inmem cursegChao Yu1-1/+5
Previous implementation of aligned pinfile allocation will: - allocate new segment on cold data log no matter whether last used segment is partially used or not, it makes IOs more random; - force concurrent cold data/GCed IO going into warm data area, it can make a bad effect on hot/cold data separation; In this patch, we introduce a new type of log named 'inmem curseg', the differents from normal curseg is: - it reuses existed segment type (CURSEG_XXX_NODE/DATA); - it only exists in memory, its segno, blkofs, summary will not b persisted into checkpoint area; With this new feature, we can enhance scalability of log, special allocators can be created for purposes: - pure lfs allocator for aligned pinfile allocation or file defragmentation - pure ssr allocator for later feature So that, let's update aligned pinfile allocation to use this new inmem curseg fwk. Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2020-07-08f2fs: show more debug info for per-temperature logChao Yu1-12/+52
- Add to account and show per-log dirty_seg, full_seg and valid_blocks in debugfs. - reformat printed info. TYPE segno secno zoneno dirty_seg full_seg valid_blk - COLD data: 1523 1523 1523 1 0 399 - WARM data: 769 769 769 20 255 133098 - HOT data: 767 767 767 9 0 167 - Dir dnode: 22 22 22 3 0 70 - File dnode: 722 722 722 14 10 6505 - Indir nodes: 2 2 2 1 0 3 Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2020-03-19f2fs: show mounted timeJaegeuk Kim1-0/+3
Let's show mounted time. Reviewed-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2020-01-23f2fs: Add f2fs stats to sysfsHridya Valsaraju1-36/+43
Currently f2fs stats are only available from /d/f2fs/status. This patch adds some of the f2fs stats to sysfs so that they are accessible even when debugfs is not mounted. The following sysfs nodes are added: -/sys/fs/f2fs/<disk>/free_segments -/sys/fs/f2fs/<disk>/cp_foreground_calls -/sys/fs/f2fs/<disk>/cp_background_calls -/sys/fs/f2fs/<disk>/gc_foreground_calls -/sys/fs/f2fs/<disk>/gc_background_calls -/sys/fs/f2fs/<disk>/moved_blocks_foreground -/sys/fs/f2fs/<disk>/moved_blocks_background -/sys/fs/f2fs/<disk>/avg_vblocks Signed-off-by: Hridya Valsaraju <hridya@google.com> [Jaegeuk Kim: allow STAT_FS without DEBUG_FS] Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2020-01-18f2fs: support data compressionChao Yu1-0/+6
This patch tries to support compression in f2fs. - New term named cluster is defined as basic unit of compression, file can be divided into multiple clusters logically. One cluster includes 4 << n (n >= 0) logical pages, compression size is also cluster size, each of cluster can be compressed or not. - In cluster metadata layout, one special flag is used to indicate cluster is compressed one or normal one, for compressed cluster, following metadata maps cluster to [1, 4 << n - 1] physical blocks, in where f2fs stores data including compress header and compressed data. - In order to eliminate write amplification during overwrite, F2FS only support compression on write-once file, data can be compressed only when all logical blocks in file are valid and cluster compress ratio is lower than specified threshold. - To enable compression on regular inode, there are three ways: * chattr +c file * chattr +c dir; touch dir/file * mount w/ -o compress_extension=ext; touch file.ext Compress metadata layout: [Dnode Structure] +-----------------------------------------------+ | cluster 1 | cluster 2 | ......... | cluster N | +-----------------------------------------------+ . . . . . . . . . Compressed Cluster . . Normal Cluster . +----------+---------+---------+---------+ +---------+---------+---------+---------+ |compr flag| block 1 | block 2 | block 3 | | block 1 | block 2 | block 3 | block 4 | +----------+---------+---------+---------+ +---------+---------+---------+---------+ . . . . . . +-------------+-------------+----------+----------------------------+ | data length | data chksum | reserved | compressed data | +-------------+-------------+----------+----------------------------+ Changelog: 20190326: - fix error handling of read_end_io(). - remove unneeded comments in f2fs_encrypt_one_page(). 20190327: - fix wrong use of f2fs_cluster_is_full() in f2fs_mpage_readpages(). - don't jump into loop directly to avoid uninitialized variables. - add TODO tag in error path of f2fs_write_cache_pages(). 20190328: - fix wrong merge condition in f2fs_read_multi_pages(). - check compressed file in f2fs_post_read_required(). 20190401 - allow overwrite on non-compressed cluster. - check cluster meta before writing compressed data. 20190402 - don't preallocate blocks for compressed file. - add lz4 compress algorithm - process multiple post read works in one workqueue Now f2fs supports processing post read work in multiple workqueue, it shows low performance due to schedule overhead of multiple workqueue executing orderly. 20190921 - compress: support buffered overwrite C: compress cluster flag V: valid block address N: NEW_ADDR One cluster contain 4 blocks before overwrite after overwrite - VVVV -> CVNN - CVNN -> VVVV - CVNN -> CVNN - CVNN -> CVVV - CVVV -> CVNN - CVVV -> CVVV 20191029 - add kconfig F2FS_FS_COMPRESSION to isolate compression related codes, add kconfig F2FS_FS_{LZO,LZ4} to cover backend algorithm. note that: will remove lzo backend if Jaegeuk agreed that too. - update codes according to Eric's comments. 20191101 - apply fixes from Jaegeuk 20191113 - apply fixes from Jaegeuk - split workqueue for fsverity 20191216 - apply fixes from Jaegeuk 20200117 - fix to avoid NULL pointer dereference [Jaegeuk Kim] - add tracepoint for f2fs_{,de}compress_pages() - fix many bugs and add some compression stats - fix overwrite/mmap bugs - address 32bit build error, reported by Geert. - bug fixes when handling errors and i_compressed_blocks Reported-by: <noreply@ellerman.id.au> Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2020-01-16f2fs: cleanup duplicate stats for atomic filesSahitya Tummala1-2/+1
Remove duplicate sbi->aw_cnt stats counter that tracks the number of atomic files currently opened (it also shows incorrect value sometimes). Use more relit lable sbi->atomic_files to show in the stats. Signed-off-by: Sahitya Tummala <stummala@codeaurora.org> Reviewed-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-08-23fs: f2fs: Remove unnecessary checks of SM_I(sbi) in update_general_status()Jia-Ju Bai1-2/+2
In fill_super() and put_super(), f2fs_destroy_stats() is called in prior to f2fs_destroy_segment_manager(), so if current sbi can still be visited in global stat list, SM_I(sbi) should be released yet. For this reason, SM_I(sbi) does not need to be checked in update_general_status(). Thank Chao Yu for advice. Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com> Reviewed-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-07-03f2fs: ioctl for removing a range from F2FSQiuyang Sun1-0/+7
This ioctl shrinks a given length (aligned to sections) from end of the main area. Any cursegs and valid blocks will be moved out before invalidating the range. This feature can be used for adjusting partition sizes online. History of the patch: Sahitya Tummala: - Add this ioctl for f2fs_compat_ioctl() as well. - Fix debugfs status to reflect the online resize changes. - Fix potential race between online resize path and allocate new data block path or gc path. Others: - Rename some identifiers. - Add some error handling branches. - Clear sbi->next_victim_seg[BG_GC/FG_GC] in shrinking range. - Implement this interface as ext4's, and change the parameter from shrunk bytes to new block count of F2FS. - During resizing, force to empty sit_journal and forbid adding new entries to it, in order to avoid invalid segno in journal after resize. - Reduce sbi->user_block_count before resize starts. - Commit the updated superblock first, and then update in-memory metadata only when the former succeeds. - Target block count must align to sections. - Write checkpoint before and after committing the new superblock, w/o CP_FSCK_FLAG respectively, so that the FS can be fixed by fsck even if resize fails after the new superblock is committed. - In free_segment_range(), reduce granularity of gc_mutex. - Add protection on curseg migration. - Add freeze_bdev() and thaw_bdev() for resize fs. - Remove CUR_MAIN_SECS and use MAIN_SECS directly for allocation. - Recover super_block and FS metadata when resize fails. - No need to clear CP_FSCK_FLAG in update_ckpt_flags(). - Clean up the sb and fs metadata update functions for resize_fs. Geert Uytterhoeven: - Use div_u64*() for 64-bit divisions Arnd Bergmann: - Not all architectures support get_user() with a 64-bit argument: ERROR: "__get_user_bad" [fs/f2fs/f2fs.ko] undefined! Use copy_from_user() here, this will always work. Signed-off-by: Qiuyang Sun <sunqiuyang@huawei.com> Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Sahitya Tummala <stummala@codeaurora.org> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-01-09f2fs: no need to check return value of debugfs_create functionsGreg Kroah-Hartman1-17/+3
When calling debugfs functions, there is no need to ever check the return value. The function can work or not, but the code logic should never do something different based on this. Cc: Jaegeuk Kim <jaegeuk@kernel.org> Cc: Chao Yu <yuchao0@huawei.com> Cc: linux-f2fs-devel@lists.sourceforge.net Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-01-08f2fs: don't access node/meta inode mapping after iputJaegeuk Kim1-7/+12
This fixes wrong access of address spaces of node and meta inodes after iput. Fixes: 60aa4d5536ab ("f2fs: fix use-after-free issue when accessing sbi->stat_info") Reviewed-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-12-27f2fs: correct wrong spelling, issing_*Jaegeuk Kim1-2/+2
Let's use "queued" instead of "issuing". Reviewed-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-12-27f2fs: use kvmalloc, if kmalloc is failedJaegeuk Kim1-1/+1
One report says memalloc failure during mount. (unwind_backtrace) from [<c010cd4c>] (show_stack+0x10/0x14) (show_stack) from [<c049c6b8>] (dump_stack+0x8c/0xa0) (dump_stack) from [<c024fcf0>] (warn_alloc+0xc4/0x160) (warn_alloc) from [<c0250218>] (__alloc_pages_nodemask+0x3f4/0x10d0) (__alloc_pages_nodemask) from [<c0270450>] (kmalloc_order_trace+0x2c/0x120) (kmalloc_order_trace) from [<c03fa748>] (build_node_manager+0x35c/0x688) (build_node_manager) from [<c03de494>] (f2fs_fill_super+0xf0c/0x16cc) (f2fs_fill_super) from [<c02a5864>] (mount_bdev+0x15c/0x188) (mount_bdev) from [<c03da624>] (f2fs_mount+0x18/0x20) (f2fs_mount) from [<c02a68b8>] (mount_fs+0x158/0x19c) (mount_fs) from [<c02c3c9c>] (vfs_kern_mount+0x78/0x134) (vfs_kern_mount) from [<c02c76ac>] (do_mount+0x474/0xca4) (do_mount) from [<c02c8264>] (SyS_mount+0x94/0xbc) (SyS_mount) from [<c0108180>] (ret_fast_syscall+0x0/0x48) Reviewed-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-11-27f2fs: add to account direct IOChao Yu1-0/+4
This patch adds f2fs_dio_submit_bio() to hook submit_io/end_io functions in direct IO path, in order to account DIO. Later, we will add this count into is_idle() to let background GC/Discard thread be aware of DIO. Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-11-27f2fs: Change to use DEFINE_SHOW_ATTRIBUTE macroYangtao Li1-12/+1
Use DEFINE_SHOW_ATTRIBUTE macro to simplify the code. Signed-off-by: Yangtao Li <tiny.windzz@gmail.com> Reviewed-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-11-27f2fs: introduce __is_large_section() for cleanupChao Yu1-1/+1
Introduce a wrapper __is_large_section() to clean up codes. Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-10-23f2fs: account read IOs and use IO counts for is_idleJaegeuk Kim1-1/+6
This patch adds issued read IO counts which is under block layer. Chao modified a bit, since: Below race can cause reversed reference on F2FS_RD_DATA, there is the same issue in f2fs_submit_page_bio(), fix them by relocate __submit_bio() and inc_page_count. Thread A Thread B - f2fs_write_begin - f2fs_submit_page_read - __submit_bio - f2fs_read_end_io - __read_end_io - dec_page_count(, F2FS_RD_DATA) - inc_page_count(, F2FS_RD_DATA) Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-10-16f2fs: checkpoint disablingDaniel Rosenberg1-1/+2
Note that, it requires "f2fs: return correct errno in f2fs_gc". This adds a lightweight non-persistent snapshotting scheme to f2fs. To use, mount with the option checkpoint=disable, and to return to normal operation, remount with checkpoint=enable. If the filesystem is shut down before remounting with checkpoint=enable, it will revert back to its apparent state when it was first mounted with checkpoint=disable. This is useful for situations where you wish to be able to roll back the state of the disk in case of some critical failure. Signed-off-by: Daniel Rosenberg <drosen@google.com> [Jaegeuk Kim: use SB_RDONLY instead of MS_RDONLY] Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-10-01f2fs: add to account skip count of background GCChao Yu1-0/+4
This patch adds to account skip count of background GC, and show stat info via 'status' debugfs entry. Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
generated by cgit v1.2.3 (git 2.39.0) at 2024-06-28 13:40:09 +0300