summaryrefslogtreecommitdiff
path: root/fs/fscache
AgeCommit message (Collapse)AuthorFilesLines
2020-06-04Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextLinus Torvalds1-2/+1
Pull networking updates from David Miller: 1) Allow setting bluetooth L2CAP modes via socket option, from Luiz Augusto von Dentz. 2) Add GSO partial support to igc, from Sasha Neftin. 3) Several cleanups and improvements to r8169 from Heiner Kallweit. 4) Add IF_OPER_TESTING link state and use it when ethtool triggers a device self-test. From Andrew Lunn. 5) Start moving away from custom driver versions, use the globally defined kernel version instead, from Leon Romanovsky. 6) Support GRO vis gro_cells in DSA layer, from Alexander Lobakin. 7) Allow hard IRQ deferral during NAPI, from Eric Dumazet. 8) Add sriov and vf support to hinic, from Luo bin. 9) Support Media Redundancy Protocol (MRP) in the bridging code, from Horatiu Vultur. 10) Support netmap in the nft_nat code, from Pablo Neira Ayuso. 11) Allow UDPv6 encapsulation of ESP in the ipsec code, from Sabrina Dubroca. Also add ipv6 support for espintcp. 12) Lots of ReST conversions of the networking documentation, from Mauro Carvalho Chehab. 13) Support configuration of ethtool rxnfc flows in bcmgenet driver, from Doug Berger. 14) Allow to dump cgroup id and filter by it in inet_diag code, from Dmitry Yakunin. 15) Add infrastructure to export netlink attribute policies to userspace, from Johannes Berg. 16) Several optimizations to sch_fq scheduler, from Eric Dumazet. 17) Fallback to the default qdisc if qdisc init fails because otherwise a packet scheduler init failure will make a device inoperative. From Jesper Dangaard Brouer. 18) Several RISCV bpf jit optimizations, from Luke Nelson. 19) Correct the return type of the ->ndo_start_xmit() method in several drivers, it's netdev_tx_t but many drivers were using 'int'. From Yunjian Wang. 20) Add an ethtool interface for PHY master/slave config, from Oleksij Rempel. 21) Add BPF iterators, from Yonghang Song. 22) Add cable test infrastructure, including ethool interfaces, from Andrew Lunn. Marvell PHY driver is the first to support this facility. 23) Remove zero-length arrays all over, from Gustavo A. R. Silva. 24) Calculate and maintain an explicit frame size in XDP, from Jesper Dangaard Brouer. 25) Add CAP_BPF, from Alexei Starovoitov. 26) Support terse dumps in the packet scheduler, from Vlad Buslov. 27) Support XDP_TX bulking in dpaa2 driver, from Ioana Ciornei. 28) Add devm_register_netdev(), from Bartosz Golaszewski. 29) Minimize qdisc resets, from Cong Wang. 30) Get rid of kernel_getsockopt and kernel_setsockopt in order to eliminate set_fs/get_fs calls. From Christoph Hellwig. * git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2517 commits) selftests: net: ip_defrag: ignore EPERM net_failover: fixed rollback in net_failover_open() Revert "tipc: Fix potential tipc_aead refcnt leak in tipc_crypto_rcv" Revert "tipc: Fix potential tipc_node refcnt leak in tipc_rcv" vmxnet3: allow rx flow hash ops only when rss is enabled hinic: add set_channels ethtool_ops support selftests/bpf: Add a default $(CXX) value tools/bpf: Don't use $(COMPILE.c) bpf, selftests: Use bpf_probe_read_kernel s390/bpf: Use bcr 0,%0 as tail call nop filler s390/bpf: Maintain 8-byte stack alignment selftests/bpf: Fix verifier test selftests/bpf: Fix sample_cnt shared between two threads bpf, selftests: Adapt cls_redirect to call csum_level helper bpf: Add csum_level helper for fixing up csum levels bpf: Fix up bpf_skb_adjust_room helper's skb csum setting sfc: add missing annotation for efx_ef10_try_update_nic_stats_vf() crypto/chtls: IPv6 support for inline TLS Crypto/chcr: Fixes a coccinile check error Crypto/chcr: Fixes compilations warnings ...
2020-05-05docs: filesystems: caching/backend-api.txt: convert it to ReSTMauro Carvalho Chehab2-5/+5
- Add a SPDX header; - Adjust document and section titles; - Some whitespace fixes and new line breaks; - Mark literal blocks as such; - Add table markups; - Add it to filesystems/caching/index.rst. Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Link: https://lore.kernel.org/r/5d0a61abaa87bfe913b9e2f321e74ef7af0f3dfc.1588021877.git.mchehab+huawei@kernel.org Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2020-05-05docs: filesystems: caching/operations.txt: convert it to ReSTMauro Carvalho Chehab1-1/+1
- Add a SPDX header; - Adjust document and section titles; - Comment out text ToC for html/pdf output; - Mark literal blocks as such; - Add it to filesystems/caching/index.rst. Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Link: https://lore.kernel.org/r/97e71cc598a4f61df484ebda3ec06b63530ceb62.1588021877.git.mchehab+huawei@kernel.org Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2020-05-05docs: filesystems: caching/netfs-api.txt: convert it to ReSTMauro Carvalho Chehab1-1/+1
- Add a SPDX header; - Adjust document and section titles; - Some whitespace fixes and new line breaks; - Mark literal blocks as such; - Add it to filesystems/caching/index.rst. Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Link: https://lore.kernel.org/r/cfe4cb1bf8e1f0093d44c30801ec42e74721e543.1588021877.git.mchehab+huawei@kernel.org Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2020-05-05docs: filesystems: convert caching/fscache.txt to ReST formatMauro Carvalho Chehab1-4/+4
- Add a SPDX header; - Adjust document and section titles; - Comment out text ToC for html/pdf output; - Some whitespace fixes and new line breaks; - Add table markups; - Add it to filesystems/index.rst. Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Link: https://lore.kernel.org/r/e33ec382a53cf10ffcbd802f6de3f384159cddba.1588021877.git.mchehab+huawei@kernel.org Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2020-05-05docs: filesystems: convert caching/object.txt to ReSTMauro Carvalho Chehab1-1/+1
- Add a SPDX header; - Adjust document and section titles; - Comment out text ToC for html/pdf output; - Some whitespace fixes and new line breaks; - Adjust the events list to make them look better for html output; - Add it to filesystems/index.rst. Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Link: https://lore.kernel.org/r/49026a8ea7e714c2e0f003aa26b975b1025476b7.1588021877.git.mchehab+huawei@kernel.org Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2020-04-27sysctl: pass kernel pointers to ->proc_handlerChristoph Hellwig1-2/+1
Instead of having all the sysctl handlers deal with user pointers, which is rather hairy in terms of the BPF interaction, copy the input to and from userspace in common code. This also means that the strings are always NUL-terminated by the common code, making the API a little bit safer. As most handler just pass through the data to one of the common handlers a lot of the changes are mechnical. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Andrey Ignatov <rdna@fb.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2020-02-04proc: convert everything to "struct proc_ops"Alexey Dobriyan3-7/+8
The most notable change is DEFINE_SHOW_ATTRIBUTE macro split in seq_file.h. Conversion rule is: llseek => proc_lseek unlocked_ioctl => proc_ioctl xxx => proc_xxx delete ".owner = THIS_MODULE" line [akpm@linux-foundation.org: fix drivers/isdn/capi/kcapi_proc.c] [sfr@canb.auug.org.au: fix kernel/sched/psi.c] Link: http://lkml.kernel.org/r/20200122180545.36222f50@canb.auug.org.au Link: http://lkml.kernel.org/r/20191225172546.GB13378@avx2 Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-07-11Revert "Merge tag 'keys-acl-20190703' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs" This reverts merge 0f75ef6a9cff49ff612f7ce0578bced9d0b38325 (and thus effectively commits 7a1ade847596 ("keys: Provide KEYCTL_GRANT_PERMISSION") 2e12256b9a76 ("keys: Replace uid/gid/perm permissions checking with an ACL") that the merge brought in). It turns out that it breaks booting with an encrypted volume, and Eric biggers reports that it also breaks the fscrypt tests [1] and loading of in-kernel X.509 certificates [2]. The root cause of all the breakage is likely the same, but David Howells is off email so rather than try to work it out it's getting reverted in order to not impact the rest of the merge window. [1] https://lore.kernel.org/lkml/20190710011559.GA7973@sol.localdomain/ [2] https://lore.kernel.org/lkml/20190710013225.GB7973@sol.localdomain/ Link: https://lore.kernel.org/lkml/CAHk-=wjxoeMJfeBahnWH=9zShKp2bsVy527vo3_y8HfOdhwAAw@mail.gmail.com/ Reported-by: Eric Biggers <ebiggers@kernel.org> Cc: David Howells <dhowells@redhat.com> Cc: James Morris <jmorris@namei.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-07-09Merge tag 'keys-acl-20190703' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs Pull keyring ACL support from David Howells: "This changes the permissions model used by keys and keyrings to be based on an internal ACL by the following means: - Replace the permissions mask internally with an ACL that contains a list of ACEs, each with a specific subject with a permissions mask. Potted default ACLs are available for new keys and keyrings. ACE subjects can be macroised to indicate the UID and GID specified on the key (which remain). Future commits will be able to add additional subject types, such as specific UIDs or domain tags/namespaces. Also split a number of permissions to give finer control. Examples include splitting the revocation permit from the change-attributes permit, thereby allowing someone to be granted permission to revoke a key without allowing them to change the owner; also the ability to join a keyring is split from the ability to link to it, thereby stopping a process accessing a keyring by joining it and thus acquiring use of possessor permits. - Provide a keyctl to allow the granting or denial of one or more permits to a specific subject. Direct access to the ACL is not granted, and the ACL cannot be viewed" * tag 'keys-acl-20190703' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs: keys: Provide KEYCTL_GRANT_PERMISSION keys: Replace uid/gid/perm permissions checking with an ACL
2019-06-28keys: Replace uid/gid/perm permissions checking with an ACLDavid Howells1-1/+1
Replace the uid/gid/perm permissions checking on a key with an ACL to allow the SETATTR and SEARCH permissions to be split. This will also allow a greater range of subjects to represented. ============ WHY DO THIS? ============ The problem is that SETATTR and SEARCH cover a slew of actions, not all of which should be grouped together. For SETATTR, this includes actions that are about controlling access to a key: (1) Changing a key's ownership. (2) Changing a key's security information. (3) Setting a keyring's restriction. And actions that are about managing a key's lifetime: (4) Setting an expiry time. (5) Revoking a key. and (proposed) managing a key as part of a cache: (6) Invalidating a key. Managing a key's lifetime doesn't really have anything to do with controlling access to that key. Expiry time is awkward since it's more about the lifetime of the content and so, in some ways goes better with WRITE permission. It can, however, be set unconditionally by a process with an appropriate authorisation token for instantiating a key, and can also be set by the key type driver when a key is instantiated, so lumping it with the access-controlling actions is probably okay. As for SEARCH permission, that currently covers: (1) Finding keys in a keyring tree during a search. (2) Permitting keyrings to be joined. (3) Invalidation. But these don't really belong together either, since these actions really need to be controlled separately. Finally, there are number of special cases to do with granting the administrator special rights to invalidate or clear keys that I would like to handle with the ACL rather than key flags and special checks. =============== WHAT IS CHANGED =============== The SETATTR permission is split to create two new permissions: (1) SET_SECURITY - which allows the key's owner, group and ACL to be changed and a restriction to be placed on a keyring. (2) REVOKE - which allows a key to be revoked. The SEARCH permission is split to create: (1) SEARCH - which allows a keyring to be search and a key to be found. (2) JOIN - which allows a keyring to be joined as a session keyring. (3) INVAL - which allows a key to be invalidated. The WRITE permission is also split to create: (1) WRITE - which allows a key's content to be altered and links to be added, removed and replaced in a keyring. (2) CLEAR - which allows a keyring to be cleared completely. This is split out to make it possible to give just this to an administrator. (3) REVOKE - see above. Keys acquire ACLs which consist of a series of ACEs, and all that apply are unioned together. An ACE specifies a subject, such as: (*) Possessor - permitted to anyone who 'possesses' a key (*) Owner - permitted to the key owner (*) Group - permitted to the key group (*) Everyone - permitted to everyone Note that 'Other' has been replaced with 'Everyone' on the assumption that you wouldn't grant a permit to 'Other' that you wouldn't also grant to everyone else. Further subjects may be made available by later patches. The ACE also specifies a permissions mask. The set of permissions is now: VIEW Can view the key metadata READ Can read the key content WRITE Can update/modify the key content SEARCH Can find the key by searching/requesting LINK Can make a link to the key SET_SECURITY Can change owner, ACL, expiry INVAL Can invalidate REVOKE Can revoke JOIN Can join this keyring CLEAR Can clear this keyring The KEYCTL_SETPERM function is then deprecated. The KEYCTL_SET_TIMEOUT function then is permitted if SET_SECURITY is set, or if the caller has a valid instantiation auth token. The KEYCTL_INVALIDATE function then requires INVAL. The KEYCTL_REVOKE function then requires REVOKE. The KEYCTL_JOIN_SESSION_KEYRING function then requires JOIN to join an existing keyring. The JOIN permission is enabled by default for session keyrings and manually created keyrings only. ====================== BACKWARD COMPATIBILITY ====================== To maintain backward compatibility, KEYCTL_SETPERM will translate the permissions mask it is given into a new ACL for a key - unless KEYCTL_SET_ACL has been called on that key, in which case an error will be returned. It will convert possessor, owner, group and other permissions into separate ACEs, if each portion of the mask is non-zero. SETATTR permission turns on all of INVAL, REVOKE and SET_SECURITY. WRITE permission turns on WRITE, REVOKE and, if a keyring, CLEAR. JOIN is turned on if a keyring is being altered. The KEYCTL_DESCRIBE function translates the ACL back into a permissions mask to return depending on possessor, owner, group and everyone ACEs. It will make the following mappings: (1) INVAL, JOIN -> SEARCH (2) SET_SECURITY -> SETATTR (3) REVOKE -> WRITE if SETATTR isn't already set (4) CLEAR -> WRITE Note that the value subsequently returned by KEYCTL_DESCRIBE may not match the value set with KEYCTL_SETATTR. ======= TESTING ======= This passes the keyutils testsuite for all but a couple of tests: (1) tests/keyctl/dh_compute/badargs: The first wrong-key-type test now returns EOPNOTSUPP rather than ENOKEY as READ permission isn't removed if the type doesn't have ->read(). You still can't actually read the key. (2) tests/keyctl/permitting/valid: The view-other-permissions test doesn't work as Other has been replaced with Everyone in the ACL. Signed-off-by: David Howells <dhowells@redhat.com>
2019-05-30treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 152Thomas Gleixner10-50/+10
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 3029 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190527070032.746973796@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-24treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 36Thomas Gleixner3-15/+3
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public licence as published by the free software foundation either version 2 of the licence or at your option any later version extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 114 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190520170857.552531963@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-21treewide: Add SPDX license identifier - Makefile/KconfigThomas Gleixner1-0/+1
Add SPDX license identifiers to all Make/Kconfig files which: - Have no license information of any form These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0-only Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-11-30fscache: fix race between enablement and dropping of objectNeilBrown1-0/+3
It was observed that a process blocked indefintely in __fscache_read_or_alloc_page(), waiting for FSCACHE_COOKIE_LOOKING_UP to be cleared via fscache_wait_for_deferred_lookup(). At this time, ->backing_objects was empty, which would normaly prevent __fscache_read_or_alloc_page() from getting to the point of waiting. This implies that ->backing_objects was cleared *after* __fscache_read_or_alloc_page was was entered. When an object is "killed" and then "dropped", FSCACHE_COOKIE_LOOKING_UP is cleared in fscache_lookup_failure(), then KILL_OBJECT and DROP_OBJECT are "called" and only in DROP_OBJECT is ->backing_objects cleared. This leaves a window where something else can set FSCACHE_COOKIE_LOOKING_UP and __fscache_read_or_alloc_page() can start waiting, before ->backing_objects is cleared There is some uncertainty in this analysis, but it seems to be fit the observations. Adding the wake in this patch will be handled correctly by __fscache_read_or_alloc_page(), as it checks if ->backing_objects is empty again, after waiting. Customer which reported the hang, also report that the hang cannot be reproduced with this fix. The backtrace for the blocked process looked like: PID: 29360 TASK: ffff881ff2ac0f80 CPU: 3 COMMAND: "zsh" #0 [ffff881ff43efbf8] schedule at ffffffff815e56f1 #1 [ffff881ff43efc58] bit_wait at ffffffff815e64ed #2 [ffff881ff43efc68] __wait_on_bit at ffffffff815e61b8 #3 [ffff881ff43efca0] out_of_line_wait_on_bit at ffffffff815e625e #4 [ffff881ff43efd08] fscache_wait_for_deferred_lookup at ffffffffa04f2e8f [fscache] #5 [ffff881ff43efd18] __fscache_read_or_alloc_page at ffffffffa04f2ffe [fscache] #6 [ffff881ff43efd58] __nfs_readpage_from_fscache at ffffffffa0679668 [nfs] #7 [ffff881ff43efd78] nfs_readpage at ffffffffa067092b [nfs] #8 [ffff881ff43efda0] generic_file_read_iter at ffffffff81187a73 #9 [ffff881ff43efe50] nfs_file_read at ffffffffa066544b [nfs] #10 [ffff881ff43efe70] __vfs_read at ffffffff811fc756 #11 [ffff881ff43efee8] vfs_read at ffffffff811fccfa #12 [ffff881ff43eff18] sys_read at ffffffff811fda62 #13 [ffff881ff43eff50] entry_SYSCALL_64_fastpath at ffffffff815e986e Signed-off-by: NeilBrown <neilb@suse.com> Signed-off-by: David Howells <dhowells@redhat.com>
2018-10-18fscache: Fix out of bound read in long cookie keysEric Sandeen1-3/+7
fscache_set_key() can incur an out-of-bounds read, reported by KASAN: BUG: KASAN: slab-out-of-bounds in fscache_alloc_cookie+0x5b3/0x680 [fscache] Read of size 4 at addr ffff88084ff056d4 by task mount.nfs/32615 and also reported by syzbot at https://lkml.org/lkml/2018/7/8/236 BUG: KASAN: slab-out-of-bounds in fscache_set_key fs/fscache/cookie.c:120 [inline] BUG: KASAN: slab-out-of-bounds in fscache_alloc_cookie+0x7a9/0x880 fs/fscache/cookie.c:171 Read of size 4 at addr ffff8801d3cc8bb4 by task syz-executor907/4466 This happens for any index_key_len which is not divisible by 4 and is larger than the size of the inline key, because the code allocates exactly index_key_len for the key buffer, but the hashing loop is stepping through it 4 bytes (u32) at a time in the buf[] array. Fix this by calculating how many u32 buffers we'll need by using DIV_ROUND_UP, and then using kcalloc() to allocate a precleared allocation buffer to hold the index_key, then using that same count as the hashing index limit. Fixes: ec0328e46d6e ("fscache: Maintain a catalogue of allocated cookies") Reported-by: syzbot+a95b989b2dde8e806af8@syzkaller.appspotmail.com Signed-off-by: Eric Sandeen <sandeen@redhat.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-10-18fscache: Fix incomplete initialisation of inline key spaceDavid Howells3-23/+5
The inline key in struct rxrpc_cookie is insufficiently initialized, zeroing only 3 of the 4 slots, therefore an index_key_len between 13 and 15 bytes will end up hashing uninitialized memory because the memcpy only partially fills the last buf[] element. Fix this by clearing fscache_cookie objects on allocation rather than using the slab constructor to initialise them. We're going to pretty much fill in the entire struct anyway, so bringing it into our dcache writably shouldn't incur much overhead. This removes the need to do clearance in fscache_set_key() (where we aren't doing it correctly anyway). Also, we don't need to set cookie->key_len in fscache_set_key() as we already did it in the only caller, so remove that. Fixes: ec0328e46d6e ("fscache: Maintain a catalogue of allocated cookies") Reported-by: syzbot+a95b989b2dde8e806af8@syzkaller.appspotmail.com Reported-by: Eric Sandeen <sandeen@redhat.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-25fscache: Fix reference overput in fscache_attach_object() error handlingKiran Kumar Modukuri3-4/+6
When a cookie is allocated that causes fscache_object structs to be allocated, those objects are initialised with the cookie pointer, but aren't blessed with a ref on that cookie unless the attachment is successfully completed in fscache_attach_object(). If attachment fails because the parent object was dying or there was a collision, fscache_attach_object() returns without incrementing the cookie counter - but upon failure of this function, the object is released which then puts the cookie, whether or not a ref was taken on the cookie. Fix this by taking a ref on the cookie when it is assigned in fscache_object_init(), even when we're creating a root object. Analysis from Kiran Kumar: This bug has been seen in 4.4.0-124-generic #148-Ubuntu kernel BugLink: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1776277 fscache cookie ref count updated incorrectly during fscache object allocation resulting in following Oops. kernel BUG at /build/linux-Y09MKI/linux-4.4.0/fs/fscache/internal.h:321! kernel BUG at /build/linux-Y09MKI/linux-4.4.0/fs/fscache/cookie.c:639! [Cause] Two threads are trying to do operate on a cookie and two objects. (1) One thread tries to unmount the filesystem and in process goes over a huge list of objects marking them dead and deleting the objects. cookie->usage is also decremented in following path: nfs_fscache_release_super_cookie -> __fscache_relinquish_cookie ->__fscache_cookie_put ->BUG_ON(atomic_read(&cookie->usage) <= 0); (2) A second thread tries to lookup an object for reading data in following path: fscache_alloc_object 1) cachefiles_alloc_object -> fscache_object_init -> assign cookie, but usage not bumped. 2) fscache_attach_object -> fails in cant_attach_object because the cookie's backing object or cookie's->parent object are going away 3) fscache_put_object -> cachefiles_put_object ->fscache_object_destroy ->fscache_cookie_put ->BUG_ON(atomic_read(&cookie->usage) <= 0); [NOTE from dhowells] It's unclear as to the circumstances in which (2) can take place, given that thread (1) is in nfs_kill_super(), however a conflicting NFS mount with slightly different parameters that creates a different superblock would do it. A backtrace from Kiran seems to show that this is a possibility: kernel BUG at/build/linux-Y09MKI/linux-4.4.0/fs/fscache/cookie.c:639! ... RIP: __fscache_cookie_put+0x3a/0x40 [fscache] Call Trace: __fscache_relinquish_cookie+0x87/0x120 [fscache] nfs_fscache_release_super_cookie+0x2d/0xb0 [nfs] nfs_kill_super+0x29/0x40 [nfs] deactivate_locked_super+0x48/0x80 deactivate_super+0x5c/0x60 cleanup_mnt+0x3f/0x90 __cleanup_mnt+0x12/0x20 task_work_run+0x86/0xb0 exit_to_usermode_loop+0xc2/0xd0 syscall_return_slowpath+0x4e/0x60 int_ret_from_sys_call+0x25/0x9f [Fix] Bump up the cookie usage in fscache_object_init, when it is first being assigned a cookie atomically such that the cookie is added and bumped up if its refcount is not zero. Remove the assignment in fscache_attach_object(). [Testcase] I have run ~100 hours of NFS stress tests and not seen this bug recur. [Regression Potential] - Limited to fscache/cachefiles. Fixes: ccc4fc3d11e9 ("FS-Cache: Implement the cookie management part of the netfs API") Signed-off-by: Kiran Kumar Modukuri <kiran.modukuri@gmail.com> Signed-off-by: David Howells <dhowells@redhat.com>
2018-07-25fscache: Allow cancelled operations to be enqueuedKiran Kumar Modukuri1-2/+4
Alter the state-check assertion in fscache_enqueue_operation() to allow cancelled operations to be given processing time so they can be cleaned up. Also fix a debugging statement that was requiring such operations to have an object assigned. Fixes: 9ae326a69004 ("CacheFiles: A cache that backs onto a mounted filesystem") Reported-by: Kiran Kumar Modukuri <kiran.modukuri@gmail.com> Signed-off-by: David Howells <dhowells@redhat.com>
2018-05-16proc: introduce proc_create_single{,_data}Christoph Hellwig3-19/+4
Variants of proc_create{,_data} that directly take a seq_file show callback and drastically reduces the boilerplate code in the callers. All trivial callers converted over. Signed-off-by: Christoph Hellwig <hch@lst.de>
2018-05-16proc: introduce proc_create_seq{,_data}Christoph Hellwig3-19/+5
Variants of proc_create{,_data} that directly take a struct seq_operations argument and drastically reduces the boilerplate code in the callers. All trivial callers converted over. Signed-off-by: Christoph Hellwig <hch@lst.de>
2018-04-11fscache: use appropriate radix tree accessorsMatthew Wilcox2-2/+2
Don't open-code accesses to data structure internals. Link: http://lkml.kernel.org/r/20180313132639.17387-7-willy@infradead.org Signed-off-by: Matthew Wilcox <mawilcox@microsoft.com> Reviewed-by: Jeff Layton <jlayton@redhat.com> Cc: Darrick J. Wong <darrick.wong@oracle.com> Cc: Dave Chinner <david@fromorbit.com> Cc: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp> Cc: Will Deacon <will.deacon@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-04-06fscache: Maintain a catalogue of allocated cookiesDavid Howells3-117/+265
Maintain a catalogue of allocated cookies so that cookie collisions can be handled properly. For the moment, this just involves printing a warning and returning a NULL cookie to the caller of fscache_acquire_cookie(), but in future it might make sense to wait for the old cookie to finish being cleaned up. This requires the cookie key to be stored attached to the cookie so that we still have the key available if the netfs relinquishes the cookie. This is done by an earlier patch. The catalogue also renders redundant fscache_netfs_list (used for checking for duplicates), so that can be removed. Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: Anna Schumaker <anna.schumaker@netapp.com> Tested-by: Steve Dickson <steved@redhat.com>
2018-04-06fscache: Pass object size in rather than calling back for itDavid Howells4-13/+21
Pass the object size in to fscache_acquire_cookie() and fscache_write_page() rather than the netfs providing a callback by which it can be received. This makes it easier to update the size of the object when a new page is written that extends the object. The current object size is also passed by fscache to the check_aux function, obviating the need to store it in the aux data. Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: Anna Schumaker <anna.schumaker@netapp.com> Tested-by: Steve Dickson <steved@redhat.com>
2018-04-04fscache: Attach the index key and aux data to the cookieDavid Howells8-89/+140
Attach copies of the index key and auxiliary data to the fscache cookie so that: (1) The callbacks to the netfs for this stuff can be eliminated. This can simplify things in the cache as the information is still available, even after the cache has relinquished the cookie. (2) Simplifies the locking requirements of accessing the information as we don't have to worry about the netfs object going away on us. (3) The cache can do lazy updating of the coherency information on disk. As long as the cache is flushed before reboot/poweroff, there's no need to update the coherency info on disk every time it changes. (4) Cookies can be hashed or put in a tree as the index key is easily available. This allows: (a) Checks for duplicate cookies can be made at the top fscache layer rather than down in the bowels of the cache backend. (b) Caching can be added to a netfs object that has a cookie if the cache is brought online after the netfs object is allocated. A certain amount of space is made in the cookie for inline copies of the data, but if it won't fit there, extra memory will be allocated for it. The downside of this is that live cache operation requires more memory. Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: Anna Schumaker <anna.schumaker@netapp.com> Tested-by: Steve Dickson <steved@redhat.com>
2018-04-04fscache: Add more tracepointsDavid Howells4-7/+76
Add more tracepoints to fscache, including: (*) fscache_page - Tracks netfs pages known to fscache. (*) fscache_check_page - Tracks the netfs querying whether a page is pending storage. (*) fscache_wake_cookie - Tracks cookies being woken up after a page completes/aborts storage in the cache. (*) fscache_op - Tracks operations being initialised. (*) fscache_wrote_page - Tracks return of the backend write_page op. (*) fscache_gang_lookup - Tracks lookup of pages to be stored in the write operation. Signed-off-by: David Howells <dhowells@redhat.com>
2018-04-04fscache: Add tracepointsDavid Howells5-39/+63
Add some tracepoints to fscache: (*) fscache_cookie - Tracks a cookie's usage count. (*) fscache_netfs - Logs registration of a network filesystem, including the pointer to the cookie allocated. (*) fscache_acquire - Logs cookie acquisition. (*) fscache_relinquish - Logs cookie relinquishment. (*) fscache_enable - Logs enablement of a cookie. (*) fscache_disable - Logs disablement of a cookie. (*) fscache_osm - Tracks execution of states in the object state machine. and cachefiles: (*) cachefiles_ref - Tracks a cachefiles object's usage count. (*) cachefiles_lookup - Logs result of lookup_one_len(). (*) cachefiles_mkdir - Logs result of vfs_mkdir(). (*) cachefiles_create - Logs result of vfs_create(). (*) cachefiles_unlink - Logs calls to vfs_unlink(). (*) cachefiles_rename - Logs calls to vfs_rename(). (*) cachefiles_mark_active - Logs an object becoming active. (*) cachefiles_wait_active - Logs a wait for an old object to be destroyed. (*) cachefiles_mark_inactive - Logs an object becoming inactive. (*) cachefiles_mark_buried - Logs the burial of an object. Signed-off-by: David Howells <dhowells@redhat.com>
2018-04-04fscache: Fix hanging wait on page discarded by writebackDavid Howells1-4/+9
If the fscache asynchronous write operation elects to discard a page that's pending storage to the cache because the page would be over the store limit then it needs to wake the page as someone may be waiting on completion of the write. The problem is that the store limit may be updated by a different asynchronous operation - and so may miss the write - and that the store limit may not even get updated until later by the netfs. Fix the kernel hang by making fscache_write_op() mark as written any pages that are over the limit. Signed-off-by: David Howells <dhowells@redhat.com>
2018-04-04fscache: Detect multiple relinquishment of a cookieDavid Howells1-1/+2
Report if an fscache cookie is relinquished multiple times by the netfs. Signed-off-by: David <dhowells@redhat.com>
2018-04-04fscache: Pass the correct cancelled indications to fscache_op_complete()David Howells1-6/+9
The last parameter to fscache_op_complete() is a bool indicating whether or not the operation was cancelled. A lot of the time the inverse value is given or no differentiation is made. Fix this. Signed-off-by: David Howells <dhowells@redhat.com>
2018-04-04fscache, cachefiles: Fix checker warningsDavid Howells1-1/+0
Fix a couple of checker warnings in fscache and cachefiles: (1) fscache_n_op_requeue is never used, so get rid of it. (2) cachefiles_uncache_page() is passed in a lock that it releases, so this needs annotating. Signed-off-by: David Howells <dhowells@redhat.com>
2018-03-20sched/wait, fs/fscache: Convert wait_on_atomic_t() usage to the new ↵Peter Zijlstra1-3/+4
wait_var_event() API The old wait_on_atomic_t() is going to get removed, use the more flexible wait_var_event() API instead. No change in functionality. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: David Howells <dhowells@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-11-16Merge tag 'afs-next-20171113' of ↵Linus Torvalds3-12/+1
git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs Pull AFS updates from David Howells: "kAFS filesystem driver overhaul. The major points of the overhaul are: (1) Preliminary groundwork is laid for supporting network-namespacing of kAFS. The remainder of the namespacing work requires some way to pass namespace information to submounts triggered by an automount. This requires something like the mount overhaul that's in progress. (2) sockaddr_rxrpc is used in preference to in_addr for holding addresses internally and add support for talking to the YFS VL server. With this, kAFS can do everything over IPv6 as well as IPv4 if it's talking to servers that support it. (3) Callback handling is overhauled to be generally passive rather than active. 'Callbacks' are promises by the server to tell us about data and metadata changes. Callbacks are now checked when we next touch an inode rather than actively going and looking for it where possible. (4) File access permit caching is overhauled to store the caching information per-inode rather than per-directory, shared over subordinate files. Whilst older AFS servers only allow ACLs on directories (shared to the files in that directory), newer AFS servers break that restriction. To improve memory usage and to make it easier to do mass-key removal, permit combinations are cached and shared. (5) Cell database management is overhauled to allow lighter locks to be used and to make cell records autonomous state machines that look after getting their own DNS records and cleaning themselves up, in particular preventing races in acquiring and relinquishing the fscache token for the cell. (6) Volume caching is overhauled. The afs_vlocation record is got rid of to simplify things and the superblock is now keyed on the cell and the numeric volume ID only. The volume record is tied to a superblock and normal superblock management is used to mediate the lifetime of the volume fscache token. (7) File server record caching is overhauled to make server records independent of cells and volumes. A server can be in multiple cells (in such a case, the administrator must make sure that the VL services for all cells correctly reflect the volumes shared between those cells). Server records are now indexed using the UUID of the server rather than the address since a server can have multiple addresses. (8) File server rotation is overhauled to handle VMOVED, VBUSY (and similar), VOFFLINE and VNOVOL indications and to handle rotation both of servers and addresses of those servers. The rotation will also wait and retry if the server says it is busy. (9) Data writeback is overhauled. Each inode no longer stores a list of modified sections tagged with the key that authorised it in favour of noting the modified region of a page in page->private and storing a list of keys that made modifications in the inode. This simplifies things and allows other keys to be used to actually write to the server if a key that made a modification becomes useless. (10) Writable mmap() is implemented. This allows a kernel to be build entirely on AFS. Note that Pre AFS-3.4 servers are no longer supported, though this can be added back if necessary (AFS-3.4 was released in 1998)" * tag 'afs-next-20171113' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs: (35 commits) afs: Protect call->state changes against signals afs: Trace page dirty/clean afs: Implement shared-writeable mmap afs: Get rid of the afs_writeback record afs: Introduce a file-private data record afs: Use a dynamic port if 7001 is in use afs: Fix directory read/modify race afs: Trace the sending of pages afs: Trace the initiation and completion of client calls afs: Fix documentation on # vs % prefix in mount source specification afs: Fix total-length calculation for multiple-page send afs: Only progress call state at end of Tx phase from rxrpc callback afs: Make use of the YFS service upgrade to fully support IPv6 afs: Overhaul volume and server record caching and fileserver rotation afs: Move server rotation code into its own file afs: Add an address list concept afs: Overhaul cell database management afs: Overhaul permit caching afs: Overhaul the callback handling afs: Rename struct afs_call server member to cm_server ...
2017-11-16mm, pagevec: remove cold parameter for pagevecsMel Gorman1-1/+1
Every pagevec_init user claims the pages being released are hot even in cases where it is unlikely the pages are hot. As no one cares about the hotness of pages being released to the allocator, just ditch the parameter. No performance impact is expected as the overhead is marginal. The parameter is removed simply because it is a bit stupid to have a useless parameter copied everywhere. Link: http://lkml.kernel.org/r/20171018075952.10627-6-mgorman@techsingularity.net Signed-off-by: Mel Gorman <mgorman@techsingularity.net> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Andi Kleen <ak@linux.intel.com> Cc: Dave Chinner <david@fromorbit.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Jan Kara <jack@suse.cz> Cc: Johannes Weiner <hannes@cmpxchg.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-11-13Pass mode to wait_on_atomic_t() action funcs and provide default actionsDavid Howells3-12/+1
Make wait_on_atomic_t() pass the TASK_* mode onto its action function as an extra argument and make it 'unsigned int throughout. Also, consolidate a bunch of identical action functions into a default function that can do the appropriate thing for the mode. Also, change the argument name in the bit_wait*() function declarations to reflect the fact that it's the mode and not the bit number. [Peter Z gives this a grudging ACK, but thinks that the whole atomic_t wait should be done differently, though he's not immediately sure as to how] Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: Peter Zijlstra <peterz@infradead.org> cc: Ingo Molnar <mingo@kernel.org>
2017-11-02License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseGreg Kroah-Hartman1-0/+1
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-10-12FS-Cache: fix dereference of NULL user_key_payloadEric Biggers1-0/+7
When the file /proc/fs/fscache/objects (available with CONFIG_FSCACHE_OBJECT_LIST=y) is opened, we request a user key with description "fscache:objlist", then access its payload. However, a revoked key has a NULL payload, and we failed to check for this. request_key() *does* skip revoked keys, but there is still a window where the key can be revoked before we access its payload. Fix it by checking for a NULL payload, treating it like a key which was already revoked at the time it was requested. Fixes: 4fbf4291aa15 ("FS-Cache: Allow the current state of all objects to be dumped") Reviewed-by: James Morris <james.l.morris@oracle.com> Cc: <stable@vger.kernel.org> [v2.6.32+] Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: David Howells <dhowells@redhat.com>
2017-09-14fscache: fix fscache_objlist_show format processingArnd Bergmann1-1/+2
gcc points out a minor bug in the handling of unknown cookie types, which could result in a string overflow when the integer is copied into a 3-byte string: fs/fscache/object-list.c: In function 'fscache_objlist_show': fs/fscache/object-list.c:265:19: error: 'sprintf' may write a terminating nul past the end of the destination [-Werror=format-overflow=] sprintf(_type, "%02u", cookie->def->type); ^~~~~~ fs/fscache/object-list.c:265:4: note: 'sprintf' output between 3 and 4 bytes into a destination of size 3 This is currently harmless as no code sets a type other than 0 or 1, but it makes sense to use snprintf() here to avoid overflowing the array if that changes. Link: http://lkml.kernel.org/r/20170714120720.906842-22-arnd@arndb.de Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-09-07mm: remove nr_pages argument from pagevec_lookup{,_range}()Jan Kara1-1/+1
All users of pagevec_lookup() and pagevec_lookup_range() now pass PAGEVEC_SIZE as a desired number of pages. Just drop the argument. Link: http://lkml.kernel.org/r/20170726114704.7626-11-jack@suse.cz Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-09-07mm: make pagevec_lookup() update indexJan Kara1-3/+2
Make pagevec_lookup() (and underlying find_get_pages()) update index to the next page where iteration should continue. Most callers want this and also pagevec_lookup_tag() already does this. Link: http://lkml.kernel.org/r/20170726114704.7626-3-jack@suse.cz Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-03-02KEYS: Differentiate uses of rcu_dereference_key() and user_key_payload()David Howells1-1/+1
rcu_dereference_key() and user_key_payload() are currently being used in two different, incompatible ways: (1) As a wrapper to rcu_dereference() - when only the RCU read lock used to protect the key. (2) As a wrapper to rcu_dereference_protected() - when the key semaphor is used to protect the key and the may be being modified. Fix this by splitting both of the key wrappers to produce: (1) RCU accessors for keys when caller has the key semaphore locked: dereference_key_locked() user_key_payload_locked() (2) RCU accessors for keys when caller holds the RCU read lock: dereference_key_rcu() user_key_payload_rcu() This should fix following warning in the NFS idmapper =============================== [ INFO: suspicious RCU usage. ] 4.10.0 #1 Tainted: G W ------------------------------- ./include/keys/user-type.h:53 suspicious rcu_dereference_protected() usage! other info that might help us debug this: rcu_scheduler_active = 2, debug_locks = 0 1 lock held by mount.nfs/5987: #0: (rcu_read_lock){......}, at: [<d000000002527abc>] nfs_idmap_get_key+0x15c/0x420 [nfsv4] stack backtrace: CPU: 1 PID: 5987 Comm: mount.nfs Tainted: G W 4.10.0 #1 Call Trace: dump_stack+0xe8/0x154 (unreliable) lockdep_rcu_suspicious+0x140/0x190 nfs_idmap_get_key+0x380/0x420 [nfsv4] nfs_map_name_to_uid+0x2a0/0x3b0 [nfsv4] decode_getfattr_attrs+0xfac/0x16b0 [nfsv4] decode_getfattr_generic.constprop.106+0xbc/0x150 [nfsv4] nfs4_xdr_dec_lookup_root+0xac/0xb0 [nfsv4] rpcauth_unwrap_resp+0xe8/0x140 [sunrpc] call_decode+0x29c/0x910 [sunrpc] __rpc_execute+0x140/0x8f0 [sunrpc] rpc_run_task+0x170/0x200 [sunrpc] nfs4_call_sync_sequence+0x68/0xa0 [nfsv4] _nfs4_lookup_root.isra.44+0xd0/0xf0 [nfsv4] nfs4_lookup_root+0xe0/0x350 [nfsv4] nfs4_lookup_root_sec+0x70/0xa0 [nfsv4] nfs4_find_root_sec+0xc4/0x100 [nfsv4] nfs4_proc_get_rootfh+0x5c/0xf0 [nfsv4] nfs4_get_rootfh+0x6c/0x190 [nfsv4] nfs4_server_common_setup+0xc4/0x260 [nfsv4] nfs4_create_server+0x278/0x3c0 [nfsv4] nfs4_remote_mount+0x50/0xb0 [nfsv4] mount_fs+0x74/0x210 vfs_kern_mount+0x78/0x220 nfs_do_root_mount+0xb0/0x140 [nfsv4] nfs4_try_mount+0x60/0x100 [nfsv4] nfs_fs_mount+0x5ec/0xda0 [nfs] mount_fs+0x74/0x210 vfs_kern_mount+0x78/0x220 do_mount+0x254/0xf70 SyS_mount+0x94/0x100 system_call+0x38/0xe0 Reported-by: Jan Stancek <jstancek@redhat.com> Signed-off-by: David Howells <dhowells@redhat.com> Tested-by: Jan Stancek <jstancek@redhat.com> Signed-off-by: James Morris <james.l.morris@oracle.com>
2017-01-31fscache: Fix dead object requeueDavid Howells1-2/+24
Under some circumstances, an fscache object can become queued such that it fscache_object_work_func() can be called once the object is in the OBJECT_DEAD state. This results in the kernel oopsing when it tries to invoke the handler for the state (which is hard coded to 0x2). The way this comes about is something like the following: (1) The object dispatcher is processing a work state for an object. This is done in workqueue context. (2) An out-of-band event comes in that isn't masked, causing the object to be queued, say EV_KILL. (3) The object dispatcher finishes processing the current work state on that object and then sees there's another event to process, so, without returning to the workqueue core, it processes that event too. It then follows the chain of events that initiates until we reach OBJECT_DEAD without going through a wait state (such as WAIT_FOR_CLEARANCE). At this point, object->events may be 0, object->event_mask will be 0 and oob_event_mask will be 0. (4) The object dispatcher returns to the workqueue processor, and in due course, this sees that the object's work item is still queued and invokes it again. (5) The current state is a work state (OBJECT_DEAD), so the dispatcher jumps to it - resulting in an OOPS. When I'm seeing this, the work state in (1) appears to have been either LOOK_UP_OBJECT or CREATE_OBJECT (object->oob_table is fscache_osm_lookup_oob). The window for (2) is very small: (A) object->event_mask is cleared whilst the event dispatch process is underway - though there's no memory barrier to force this to the top of the function. The window, therefore is from the time the object was selected by the workqueue processor and made requeueable to the time the mask was cleared. (B) fscache_raise_event() will only queue the object if it manages to set the event bit and the corresponding event_mask bit was set. The enqueuement is then deferred slightly whilst we get a ref on the object and get the per-CPU variable for workqueue congestion. This slight deferral slightly increases the probability by allowing extra time for the workqueue to make the item requeueable. Handle this by giving the dead state a processor function and checking the for the dead state address rather than seeing if the processor function is address 0x2. The dead state processor function can then set a flag to indicate that it's occurred and give a warning if it occurs more than once per object. If this race occurs, an oops similar to the following is seen (note the RIP value): BUG: unable to handle kernel NULL pointer dereference at 0000000000000002 IP: [<0000000000000002>] 0x1 PGD 0 Oops: 0010 [#1] SMP Modules linked in: ... CPU: 17 PID: 16077 Comm: kworker/u48:9 Not tainted 3.10.0-327.18.2.el7.x86_64 #1 Hardware name: HP ProLiant DL380 Gen9/ProLiant DL380 Gen9, BIOS P89 12/27/2015 Workqueue: fscache_object fscache_object_work_func [fscache] task: ffff880302b63980 ti: ffff880717544000 task.ti: ffff880717544000 RIP: 0010:[<0000000000000002>] [<0000000000000002>] 0x1 RSP: 0018:ffff880717547df8 EFLAGS: 00010202 RAX: ffffffffa0368640 RBX: ffff880edf7a4480 RCX: dead000000200200 RDX: 0000000000000002 RSI: 00000000ffffffff RDI: ffff880edf7a4480 RBP: ffff880717547e18 R08: 0000000000000000 R09: dfc40a25cb3a4510 R10: dfc40a25cb3a4510 R11: 0000000000000400 R12: 0000000000000000 R13: ffff880edf7a4510 R14: ffff8817f6153400 R15: 0000000000000600 FS: 0000000000000000(0000) GS:ffff88181f420000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000002 CR3: 000000000194a000 CR4: 00000000001407e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Stack: ffffffffa0363695 ffff880edf7a4510 ffff88093f16f900 ffff8817faa4ec00 ffff880717547e60 ffffffff8109d5db 00000000faa4ec18 0000000000000000 ffff8817faa4ec18 ffff88093f16f930 ffff880302b63980 ffff88093f16f900 Call Trace: [<ffffffffa0363695>] ? fscache_object_work_func+0xa5/0x200 [fscache] [<ffffffff8109d5db>] process_one_work+0x17b/0x470 [<ffffffff8109e4ac>] worker_thread+0x21c/0x400 [<ffffffff8109e290>] ? rescuer_thread+0x400/0x400 [<ffffffff810a5acf>] kthread+0xcf/0xe0 [<ffffffff810a5a00>] ? kthread_create_on_node+0x140/0x140 [<ffffffff816460d8>] ret_from_fork+0x58/0x90 [<ffffffff810a5a00>] ? kthread_create_on_node+0x140/0x140 Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: Jeremy McNicoll <jeremymc@redhat.com> Tested-by: Frank Sorenson <sorenson@redhat.com> Tested-by: Benjamin Coddington <bcodding@redhat.com> Reviewed-by: Benjamin Coddington <bcodding@redhat.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2017-01-31fscache: Clear outstanding writes when disabling a cookieDavid Howells2-0/+11
fscache_disable_cookie() needs to clear the outstanding writes on the cookie it's disabling because they cannot be completed after. Without this, fscache_nfs_open_file() gets stuck because it disables the cookie when the file is opened for writing but can't uncache the pages till afterwards - otherwise there's a race between the open routine and anyone who already has it open R/O and is still reading from it. Looking in /proc/pid/stack of the offending process shows: [<ffffffffa0142883>] __fscache_wait_on_page_write+0x82/0x9b [fscache] [<ffffffffa014336e>] __fscache_uncache_all_inode_pages+0x91/0xe1 [fscache] [<ffffffffa01740fa>] nfs_fscache_open_file+0x59/0x9e [nfs] [<ffffffffa01ccf41>] nfs4_file_open+0x17f/0x1b8 [nfsv4] [<ffffffff8117350e>] do_dentry_open+0x16d/0x2b7 [<ffffffff811743ac>] vfs_open+0x5c/0x65 [<ffffffff81184185>] path_openat+0x785/0x8fb [<ffffffff81184343>] do_filp_open+0x48/0x9e [<ffffffff81174710>] do_sys_open+0x13b/0x1cb [<ffffffff811747b9>] SyS_open+0x19/0x1b [<ffffffff81001c44>] do_syscall_64+0x80/0x17a [<ffffffff8165c2da>] return_from_SYSCALL_64+0x0/0x7a [<ffffffffffffffff>] 0xffffffffffffffff Reported-by: Jianhong Yin <jiyin@redhat.com> Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: Jeff Layton <jlayton@redhat.com> Acked-by: Steve Dickson <steved@redhat.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2017-01-31FS-Cache: Initialise stores_lock in netfs cookieDavid Howells1-0/+1
Initialise the stores_lock in fscache netfs cookies. Technically, it shouldn't be necessary, since the netfs cookie is an index and stores no data, but initialising it anyway adds insignificant overhead. Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-by: Jeff Layton <jlayton@redhat.com> Acked-by: Steve Dickson <steved@redhat.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2016-07-01Merge branch 'd_real' of ↵Al Viro1-0/+2
git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs into work.misc
2016-06-01FS-Cache: wake write waiter after invalidating writesYan, Zheng1-0/+2
Signed-off-by: Yan, Zheng <zyan@redhat.com> Acked-by: David Howells <dhowells@redhat.com>
2016-05-30drop redundant ->owner initializationsAl Viro3-3/+0
it's not needed for file_operations of inodes located on fs defined in the hosting module and for file_operations that go into procfs. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2016-04-04mm, fs: get rid of PAGE_CACHE_* and page_cache_{get,release} macrosKirill A. Shutemov1-5/+5
PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} macros were introduced *long* time ago with promise that one day it will be possible to implement page cache with bigger chunks than PAGE_SIZE. This promise never materialized. And unlikely will. We have many places where PAGE_CACHE_SIZE assumed to be equal to PAGE_SIZE. And it's constant source of confusion on whether PAGE_CACHE_* or PAGE_* constant should be used in a particular case, especially on the border between fs and mm. Global switching to PAGE_CACHE_SIZE != PAGE_SIZE would cause to much breakage to be doable. Let's stop pretending that pages in page cache are special. They are not. The changes are pretty straight-forward: - <foo> << (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - <foo> >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} -> PAGE_{SIZE,SHIFT,MASK,ALIGN}; - page_cache_get() -> get_page(); - page_cache_release() -> put_page(); This patch contains automated changes generated with coccinelle using script below. For some reason, coccinelle doesn't patch header files. I've called spatch for them manually. The only adjustment after coccinelle is revert of changes to PAGE_CAHCE_ALIGN definition: we are going to drop it later. There are few places in the code where coccinelle didn't reach. I'll fix them manually in a separate patch. Comments and documentation also will be addressed with the separate patch. virtual patch @@ expression E; @@ - E << (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ expression E; @@ - E >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ @@ - PAGE_CACHE_SHIFT + PAGE_SHIFT @@ @@ - PAGE_CACHE_SIZE + PAGE_SIZE @@ @@ - PAGE_CACHE_MASK + PAGE_MASK @@ expression E; @@ - PAGE_CACHE_ALIGN(E) + PAGE_ALIGN(E) @@ expression E; @@ - page_cache_get(E) + get_page(E) @@ expression E; @@ - page_cache_release(E) + put_page(E) Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-11-11FS-Cache: Handle a write to the page immediately beyond the EOF markerDavid Howells1-1/+1
Handle a write being requested to the page immediately beyond the EOF marker on a cache object. Currently this gets an assertion failure in CacheFiles because the EOF marker is used there to encode information about a partial page at the EOF - which could lead to an unknown blank spot in the file if we extend the file over it. The problem is actually in fscache where we check the index of the page being written against store_limit. store_limit is set to the number of pages that we're allowed to store by fscache_set_store_limit() - which means it's one more than the index of the last page we're allowed to store. The problem is that we permit writing to a page with an index _equal_ to the store limit - when we should reject that case. Whilst we're at it, change the triggered assertion in CacheFiles to just return -ENOBUFS instead. The assertion failure looks something like this: CacheFiles: Assertion failed 1000 < 7b1 is false ------------[ cut here ]------------ kernel BUG at fs/cachefiles/rdwr.c:962! ... RIP: 0010:[<ffffffffa02c9e83>] [<ffffffffa02c9e83>] cachefiles_write_page+0x273/0x2d0 [cachefiles] Cc: stable@vger.kernel.org # v2.6.31+; earlier - that + backport of a17754f (at least) Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-11-11FS-Cache: Don't override netfs's primary_index if registering failedKinglong Mee1-18/+17
Only override netfs->primary_index when registering success. Cc: stable@vger.kernel.org # v2.6.30+ Signed-off-by: Kinglong Mee <kinglongmee@gmail.com> Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>