summaryrefslogtreecommitdiff
path: root/fs/jffs2
AgeCommit message (Collapse)AuthorFilesLines
2022-01-17Merge branch 'signal-for-v5.17' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace Pull signal/exit/ptrace updates from Eric Biederman: "This set of changes deletes some dead code, makes a lot of cleanups which hopefully make the code easier to follow, and fixes bugs found along the way. The end-game which I have not yet reached yet is for fatal signals that generate coredumps to be short-circuit deliverable from complete_signal, for force_siginfo_to_task not to require changing userspace configured signal delivery state, and for the ptrace stops to always happen in locations where we can guarantee on all architectures that the all of the registers are saved and available on the stack. Removal of profile_task_ext, profile_munmap, and profile_handoff_task are the big successes for dead code removal this round. A bunch of small bug fixes are included, as most of the issues reported were small enough that they would not affect bisection so I simply added the fixes and did not fold the fixes into the changes they were fixing. There was a bug that broke coredumps piped to systemd-coredump. I dropped the change that caused that bug and replaced it entirely with something much more restrained. Unfortunately that required some rebasing. Some successes after this set of changes: There are few enough calls to do_exit to audit in a reasonable amount of time. The lifetime of struct kthread now matches the lifetime of struct task, and the pointer to struct kthread is no longer stored in set_child_tid. The flag SIGNAL_GROUP_COREDUMP is removed. The field group_exit_task is removed. Issues where task->exit_code was examined with signal->group_exit_code should been examined were fixed. There are several loosely related changes included because I am cleaning up and if I don't include them they will probably get lost. The original postings of these changes can be found at: https://lkml.kernel.org/r/87a6ha4zsd.fsf@email.froward.int.ebiederm.org https://lkml.kernel.org/r/87bl1kunjj.fsf@email.froward.int.ebiederm.org https://lkml.kernel.org/r/87r19opkx1.fsf_-_@email.froward.int.ebiederm.org I trimmed back the last set of changes to only the obviously correct once. Simply because there was less time for review than I had hoped" * 'signal-for-v5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace: (44 commits) ptrace/m68k: Stop open coding ptrace_report_syscall ptrace: Remove unused regs argument from ptrace_report_syscall ptrace: Remove second setting of PT_SEIZED in ptrace_attach taskstats: Cleanup the use of task->exit_code exit: Use the correct exit_code in /proc/<pid>/stat exit: Fix the exit_code for wait_task_zombie exit: Coredumps reach do_group_exit exit: Remove profile_handoff_task exit: Remove profile_task_exit & profile_munmap signal: clean up kernel-doc comments signal: Remove the helper signal_group_exit signal: Rename group_exit_task group_exec_task coredump: Stop setting signal->group_exit_task signal: Remove SIGNAL_GROUP_COREDUMP signal: During coredumps set SIGNAL_GROUP_EXIT in zap_process signal: Make coredump handling explicit in complete_signal signal: Have prepare_signal detect coredumps using signal->core_state signal: Have the oom killer detect coredumps using signal->core_state exit: Move force_uaccess back into do_exit exit: Guarantee make_task_dead leaks the tsk when calling do_task_exit ...
2021-12-24jffs2: GC deadlock reading a page that is used in jffs2_write_begin()Kyeong Yoo1-15/+25
GC task can deadlock in read_cache_page() because it may attempt to release a page that is actually allocated by another task in jffs2_write_begin(). The reason is that in jffs2_write_begin() there is a small window a cache page is allocated for use but not set Uptodate yet. This ends up with a deadlock between two tasks: 1) A task (e.g. file copy) - jffs2_write_begin() locks a cache page - jffs2_write_end() tries to lock "alloc_sem" from jffs2_reserve_space() <-- STUCK 2) GC task (jffs2_gcd_mtd3) - jffs2_garbage_collect_pass() locks "alloc_sem" - try to lock the same cache page in read_cache_page() <-- STUCK So to avoid this deadlock, hold "alloc_sem" in jffs2_write_begin() while reading data in a cache page. Signed-off-by: Kyeong Yoo <kyeong.yoo@alliedtelesis.co.nz> Signed-off-by: Richard Weinberger <richard@nod.at>
2021-12-13exit: Rename complete_and_exit to kthread_complete_and_exitEric W. Biederman1-1/+1
Update complete_and_exit to call kthread_exit instead of do_exit. Change the name to reflect this change in functionality. All of the users of complete_and_exit are causing the current kthread to exit so this change makes it clear what is happening. Move the implementation of kthread_complete_and_exit from kernel/exit.c to to kernel/kthread.c. As this function is kthread specific it makes most sense to live with the kthread functions. There are no functional change. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2021-08-18vfs: add rcu argument to ->get_acl() callbackMiklos Szeredi2-2/+5
Add a rcu argument to the ->get_acl() callback to allow get_cached_acl_rcu() to call the ->get_acl() method in the next patch. Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2021-05-05Merge tag 'for-linus-5.13-rc1' of ↵Linus Torvalds3-9/+10
git://git.kernel.org/pub/scm/linux/kernel/git/rw/ubifs Pull JFFS2, UBI and UBIFS updates from Richard Weinberger: "JFFS2: - Use splice_write() - Fix for a slab-out-of-bounds bug UBI: - Fix for clang related warnings - Code cleanup UBIFS: - Fix for inode rebirth at replay - Set s_uuid - Use zstd for default filesystem" * tag 'for-linus-5.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/ubifs: ubi: Remove unnecessary struct declaration jffs2: Hook up splice_write callback jffs2: avoid Wempty-body warnings jffs2: Fix kasan slab-out-of-bounds problem ubi: Fix fall-through warnings for Clang ubifs: Report max LEB count at mount time ubifs: Set s_uuid in super block to support ima/evm uuid options ubifs: Default to zstd compression ubifs: Only check replay with inode type to judge if inode linked
2021-04-15jffs2: Hook up splice_write callbackJoel Stanley1-0/+1
overlayfs using jffs2 as the upper filesystem would fail in some cases since moving to v5.10. The test case used was to run 'touch' on a file that exists in the lower fs, causing the modification time to be updated. It returns EINVAL when the bug is triggered. A bisection showed this was introduced in v5.9-rc1, with commit 36e2c7421f02 ("fs: don't allow splice read/write without explicit ops"). Reverting that commit restores the expected behaviour. Some digging showed that this was due to jffs2 lacking an implementation of splice_write. (For unknown reasons the warn_unsupported that should trigger was not displaying any output). Adding this patch resolved the issue and the test now passes. Cc: stable@vger.kernel.org Fixes: 36e2c7421f02 ("fs: don't allow splice read/write without explicit ops") Signed-off-by: Joel Stanley <joel@jms.id.au> Reviewed-by: Christoph Hellwig <hch@lst.de> Tested-by: Lei YU <yulei.sh@bytedance.com> Signed-off-by: Richard Weinberger <richard@nod.at>
2021-04-15jffs2: avoid Wempty-body warningsArnd Bergmann1-8/+8
Building with W=1 shows a few warnings for empty macros: fs/jffs2/scan.c: In function 'jffs2_scan_xattr_node': fs/jffs2/scan.c:378:66: error: suggest braces around empty body in an 'if' statement [-Werror=empty-body] 378 | jffs2_sum_add_xattr_mem(s, rx, ofs - jeb->offset); | ^ fs/jffs2/scan.c: In function 'jffs2_scan_xref_node': fs/jffs2/scan.c:434:65: error: suggest braces around empty body in an 'if' statement [-Werror=empty-body] 434 | jffs2_sum_add_xref_mem(s, rr, ofs - jeb->offset); | ^ fs/jffs2/scan.c: In function 'jffs2_scan_eraseblock': fs/jffs2/scan.c:893:88: error: suggest braces around empty body in an 'if' statement [-Werror=empty-body] 893 | jffs2_sum_add_padding_mem(s, je32_to_cpu(node->totlen)); | ^ Change all these macros to 'do { } while (0)' statements to avoid the warnings and make the code a little more robust. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Richard Weinberger <richard@nod.at>
2021-04-15jffs2: Fix kasan slab-out-of-bounds problemlizhe1-1/+1
KASAN report a slab-out-of-bounds problem. The logs are listed below. It is because in function jffs2_scan_dirent_node, we alloc "checkedlen+1" bytes for fd->name and we check crc with length rd->nsize. If checkedlen is less than rd->nsize, it will cause the slab-out-of-bounds problem. jffs2: Dirent at *** has zeroes in name. Truncating to %d char ================================================================== BUG: KASAN: slab-out-of-bounds in crc32_le+0x1ce/0x260 at addr ffff8800842cf2d1 Read of size 1 by task test_JFFS2/915 ============================================================================= BUG kmalloc-64 (Tainted: G B O ): kasan: bad access detected ----------------------------------------------------------------------------- INFO: Allocated in jffs2_alloc_full_dirent+0x2a/0x40 age=0 cpu=1 pid=915 ___slab_alloc+0x580/0x5f0 __slab_alloc.isra.24+0x4e/0x64 __kmalloc+0x170/0x300 jffs2_alloc_full_dirent+0x2a/0x40 jffs2_scan_eraseblock+0x1ca4/0x3b64 jffs2_scan_medium+0x285/0xfe0 jffs2_do_mount_fs+0x5fb/0x1bbc jffs2_do_fill_super+0x245/0x6f0 jffs2_fill_super+0x287/0x2e0 mount_mtd_aux.isra.0+0x9a/0x144 mount_mtd+0x222/0x2f0 jffs2_mount+0x41/0x60 mount_fs+0x63/0x230 vfs_kern_mount.part.6+0x6c/0x1f4 do_mount+0xae8/0x1940 SyS_mount+0x105/0x1d0 INFO: Freed in jffs2_free_full_dirent+0x22/0x40 age=27 cpu=1 pid=915 __slab_free+0x372/0x4e4 kfree+0x1d4/0x20c jffs2_free_full_dirent+0x22/0x40 jffs2_build_remove_unlinked_inode+0x17a/0x1e4 jffs2_do_mount_fs+0x1646/0x1bbc jffs2_do_fill_super+0x245/0x6f0 jffs2_fill_super+0x287/0x2e0 mount_mtd_aux.isra.0+0x9a/0x144 mount_mtd+0x222/0x2f0 jffs2_mount+0x41/0x60 mount_fs+0x63/0x230 vfs_kern_mount.part.6+0x6c/0x1f4 do_mount+0xae8/0x1940 SyS_mount+0x105/0x1d0 entry_SYSCALL_64_fastpath+0x1e/0x97 Call Trace: [<ffffffff815befef>] dump_stack+0x59/0x7e [<ffffffff812d1d65>] print_trailer+0x125/0x1b0 [<ffffffff812d82c8>] object_err+0x34/0x40 [<ffffffff812dadef>] kasan_report.part.1+0x21f/0x534 [<ffffffff81132401>] ? vprintk+0x2d/0x40 [<ffffffff815f1ee2>] ? crc32_le+0x1ce/0x260 [<ffffffff812db41a>] kasan_report+0x26/0x30 [<ffffffff812d9fc1>] __asan_load1+0x3d/0x50 [<ffffffff815f1ee2>] crc32_le+0x1ce/0x260 [<ffffffff814764ae>] ? jffs2_alloc_full_dirent+0x2a/0x40 [<ffffffff81485cec>] jffs2_scan_eraseblock+0x1d0c/0x3b64 [<ffffffff81488813>] ? jffs2_scan_medium+0xccf/0xfe0 [<ffffffff81483fe0>] ? jffs2_scan_make_ino_cache+0x14c/0x14c [<ffffffff812da3e9>] ? kasan_unpoison_shadow+0x35/0x50 [<ffffffff812da3e9>] ? kasan_unpoison_shadow+0x35/0x50 [<ffffffff812da462>] ? kasan_kmalloc+0x5e/0x70 [<ffffffff812d5d90>] ? kmem_cache_alloc_trace+0x10c/0x2cc [<ffffffff818169fb>] ? mtd_point+0xf7/0x130 [<ffffffff81487dc9>] jffs2_scan_medium+0x285/0xfe0 [<ffffffff81487b44>] ? jffs2_scan_eraseblock+0x3b64/0x3b64 [<ffffffff812da3e9>] ? kasan_unpoison_shadow+0x35/0x50 [<ffffffff812da3e9>] ? kasan_unpoison_shadow+0x35/0x50 [<ffffffff812da462>] ? kasan_kmalloc+0x5e/0x70 [<ffffffff812d57df>] ? __kmalloc+0x12b/0x300 [<ffffffff812da462>] ? kasan_kmalloc+0x5e/0x70 [<ffffffff814a2753>] ? jffs2_sum_init+0x9f/0x240 [<ffffffff8148b2ff>] jffs2_do_mount_fs+0x5fb/0x1bbc [<ffffffff8148ad04>] ? jffs2_del_noinode_dirent+0x640/0x640 [<ffffffff812da462>] ? kasan_kmalloc+0x5e/0x70 [<ffffffff81127c5b>] ? __init_rwsem+0x97/0xac [<ffffffff81492349>] jffs2_do_fill_super+0x245/0x6f0 [<ffffffff81493c5b>] jffs2_fill_super+0x287/0x2e0 [<ffffffff814939d4>] ? jffs2_parse_options+0x594/0x594 [<ffffffff81819bea>] mount_mtd_aux.isra.0+0x9a/0x144 [<ffffffff81819eb6>] mount_mtd+0x222/0x2f0 [<ffffffff814939d4>] ? jffs2_parse_options+0x594/0x594 [<ffffffff81819c94>] ? mount_mtd_aux.isra.0+0x144/0x144 [<ffffffff81258757>] ? free_pages+0x13/0x1c [<ffffffff814fa0ac>] ? selinux_sb_copy_data+0x278/0x2e0 [<ffffffff81492b35>] jffs2_mount+0x41/0x60 [<ffffffff81302fb7>] mount_fs+0x63/0x230 [<ffffffff8133755f>] ? alloc_vfsmnt+0x32f/0x3b0 [<ffffffff81337f2c>] vfs_kern_mount.part.6+0x6c/0x1f4 [<ffffffff8133ceec>] do_mount+0xae8/0x1940 [<ffffffff811b94e0>] ? audit_filter_rules.constprop.6+0x1d10/0x1d10 [<ffffffff8133c404>] ? copy_mount_string+0x40/0x40 [<ffffffff812cbf78>] ? alloc_pages_current+0xa4/0x1bc [<ffffffff81253a89>] ? __get_free_pages+0x25/0x50 [<ffffffff81338993>] ? copy_mount_options.part.17+0x183/0x264 [<ffffffff8133e3a9>] SyS_mount+0x105/0x1d0 [<ffffffff8133e2a4>] ? copy_mnt_ns+0x560/0x560 [<ffffffff810e8391>] ? msa_space_switch_handler+0x13d/0x190 [<ffffffff81be184a>] entry_SYSCALL_64_fastpath+0x1e/0x97 [<ffffffff810e9274>] ? msa_space_switch+0xb0/0xe0 Memory state around the buggy address: ffff8800842cf180: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc ffff8800842cf200: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc >ffff8800842cf280: fc fc fc fc fc fc 00 00 00 00 01 fc fc fc fc fc ^ ffff8800842cf300: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc ffff8800842cf380: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc ================================================================== Cc: stable@vger.kernel.org Reported-by: Kunkun Xu <xukunkun1@huawei.com> Signed-off-by: lizhe <lizhe67@huawei.com> Signed-off-by: Richard Weinberger <richard@nod.at>
2021-03-31fs/jffs2: Delete obsolete TODO fileWang Qing1-37/+0
The TODO file here has not been updated for 14 years, and the function development described in the file have been implemented or abandoned. Its existence will mislead developers seeking to view outdated information. Signed-off-by: Wang Qing <wangqing@vivo.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-24Merge tag 'idmapped-mounts-v5.12' of ↵Linus Torvalds8-20/+34
git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux Pull idmapped mounts from Christian Brauner: "This introduces idmapped mounts which has been in the making for some time. Simply put, different mounts can expose the same file or directory with different ownership. This initial implementation comes with ports for fat, ext4 and with Christoph's port for xfs with more filesystems being actively worked on by independent people and maintainers. Idmapping mounts handle a wide range of long standing use-cases. Here are just a few: - Idmapped mounts make it possible to easily share files between multiple users or multiple machines especially in complex scenarios. For example, idmapped mounts will be used in the implementation of portable home directories in systemd-homed.service(8) where they allow users to move their home directory to an external storage device and use it on multiple computers where they are assigned different uids and gids. This effectively makes it possible to assign random uids and gids at login time. - It is possible to share files from the host with unprivileged containers without having to change ownership permanently through chown(2). - It is possible to idmap a container's rootfs and without having to mangle every file. For example, Chromebooks use it to share the user's Download folder with their unprivileged containers in their Linux subsystem. - It is possible to share files between containers with non-overlapping idmappings. - Filesystem that lack a proper concept of ownership such as fat can use idmapped mounts to implement discretionary access (DAC) permission checking. - They allow users to efficiently changing ownership on a per-mount basis without having to (recursively) chown(2) all files. In contrast to chown (2) changing ownership of large sets of files is instantenous with idmapped mounts. This is especially useful when ownership of a whole root filesystem of a virtual machine or container is changed. With idmapped mounts a single syscall mount_setattr syscall will be sufficient to change the ownership of all files. - Idmapped mounts always take the current ownership into account as idmappings specify what a given uid or gid is supposed to be mapped to. This contrasts with the chown(2) syscall which cannot by itself take the current ownership of the files it changes into account. It simply changes the ownership to the specified uid and gid. This is especially problematic when recursively chown(2)ing a large set of files which is commong with the aforementioned portable home directory and container and vm scenario. - Idmapped mounts allow to change ownership locally, restricting it to specific mounts, and temporarily as the ownership changes only apply as long as the mount exists. Several userspace projects have either already put up patches and pull-requests for this feature or will do so should you decide to pull this: - systemd: In a wide variety of scenarios but especially right away in their implementation of portable home directories. https://systemd.io/HOME_DIRECTORY/ - container runtimes: containerd, runC, LXD:To share data between host and unprivileged containers, unprivileged and privileged containers, etc. The pull request for idmapped mounts support in containerd, the default Kubernetes runtime is already up for quite a while now: https://github.com/containerd/containerd/pull/4734 - The virtio-fs developers and several users have expressed interest in using this feature with virtual machines once virtio-fs is ported. - ChromeOS: Sharing host-directories with unprivileged containers. I've tightly synced with all those projects and all of those listed here have also expressed their need/desire for this feature on the mailing list. For more info on how people use this there's a bunch of talks about this too. Here's just two recent ones: https://www.cncf.io/wp-content/uploads/2020/12/Rootless-Containers-in-Gitpod.pdf https://fosdem.org/2021/schedule/event/containers_idmap/ This comes with an extensive xfstests suite covering both ext4 and xfs: https://git.kernel.org/brauner/xfstests-dev/h/idmapped_mounts It covers truncation, creation, opening, xattrs, vfscaps, setid execution, setgid inheritance and more both with idmapped and non-idmapped mounts. It already helped to discover an unrelated xfs setgid inheritance bug which has since been fixed in mainline. It will be sent for inclusion with the xfstests project should you decide to merge this. In order to support per-mount idmappings vfsmounts are marked with user namespaces. The idmapping of the user namespace will be used to map the ids of vfs objects when they are accessed through that mount. By default all vfsmounts are marked with the initial user namespace. The initial user namespace is used to indicate that a mount is not idmapped. All operations behave as before and this is verified in the testsuite. Based on prior discussions we want to attach the whole user namespace and not just a dedicated idmapping struct. This allows us to reuse all the helpers that already exist for dealing with idmappings instead of introducing a whole new range of helpers. In addition, if we decide in the future that we are confident enough to enable unprivileged users to setup idmapped mounts the permission checking can take into account whether the caller is privileged in the user namespace the mount is currently marked with. The user namespace the mount will be marked with can be specified by passing a file descriptor refering to the user namespace as an argument to the new mount_setattr() syscall together with the new MOUNT_ATTR_IDMAP flag. The system call follows the openat2() pattern of extensibility. The following conditions must be met in order to create an idmapped mount: - The caller must currently have the CAP_SYS_ADMIN capability in the user namespace the underlying filesystem has been mounted in. - The underlying filesystem must support idmapped mounts. - The mount must not already be idmapped. This also implies that the idmapping of a mount cannot be altered once it has been idmapped. - The mount must be a detached/anonymous mount, i.e. it must have been created by calling open_tree() with the OPEN_TREE_CLONE flag and it must not already have been visible in the filesystem. The last two points guarantee easier semantics for userspace and the kernel and make the implementation significantly simpler. By default vfsmounts are marked with the initial user namespace and no behavioral or performance changes are observed. The manpage with a detailed description can be found here: https://git.kernel.org/brauner/man-pages/c/1d7b902e2875a1ff342e036a9f866a995640aea8 In order to support idmapped mounts, filesystems need to be changed and mark themselves with the FS_ALLOW_IDMAP flag in fs_flags. The patches to convert individual filesystem are not very large or complicated overall as can be seen from the included fat, ext4, and xfs ports. Patches for other filesystems are actively worked on and will be sent out separately. The xfstestsuite can be used to verify that port has been done correctly. The mount_setattr() syscall is motivated independent of the idmapped mounts patches and it's been around since July 2019. One of the most valuable features of the new mount api is the ability to perform mounts based on file descriptors only. Together with the lookup restrictions available in the openat2() RESOLVE_* flag namespace which we added in v5.6 this is the first time we are close to hardened and race-free (e.g. symlinks) mounting and path resolution. While userspace has started porting to the new mount api to mount proper filesystems and create new bind-mounts it is currently not possible to change mount options of an already existing bind mount in the new mount api since the mount_setattr() syscall is missing. With the addition of the mount_setattr() syscall we remove this last restriction and userspace can now fully port to the new mount api, covering every use-case the old mount api could. We also add the crucial ability to recursively change mount options for a whole mount tree, both removing and adding mount options at the same time. This syscall has been requested multiple times by various people and projects. There is a simple tool available at https://github.com/brauner/mount-idmapped that allows to create idmapped mounts so people can play with this patch series. I'll add support for the regular mount binary should you decide to pull this in the following weeks: Here's an example to a simple idmapped mount of another user's home directory: u1001@f2-vm:/$ sudo ./mount --idmap both:1000:1001:1 /home/ubuntu/ /mnt u1001@f2-vm:/$ ls -al /home/ubuntu/ total 28 drwxr-xr-x 2 ubuntu ubuntu 4096 Oct 28 22:07 . drwxr-xr-x 4 root root 4096 Oct 28 04:00 .. -rw------- 1 ubuntu ubuntu 3154 Oct 28 22:12 .bash_history -rw-r--r-- 1 ubuntu ubuntu 220 Feb 25 2020 .bash_logout -rw-r--r-- 1 ubuntu ubuntu 3771 Feb 25 2020 .bashrc -rw-r--r-- 1 ubuntu ubuntu 807 Feb 25 2020 .profile -rw-r--r-- 1 ubuntu ubuntu 0 Oct 16 16:11 .sudo_as_admin_successful -rw------- 1 ubuntu ubuntu 1144 Oct 28 00:43 .viminfo u1001@f2-vm:/$ ls -al /mnt/ total 28 drwxr-xr-x 2 u1001 u1001 4096 Oct 28 22:07 . drwxr-xr-x 29 root root 4096 Oct 28 22:01 .. -rw------- 1 u1001 u1001 3154 Oct 28 22:12 .bash_history -rw-r--r-- 1 u1001 u1001 220 Feb 25 2020 .bash_logout -rw-r--r-- 1 u1001 u1001 3771 Feb 25 2020 .bashrc -rw-r--r-- 1 u1001 u1001 807 Feb 25 2020 .profile -rw-r--r-- 1 u1001 u1001 0 Oct 16 16:11 .sudo_as_admin_successful -rw------- 1 u1001 u1001 1144 Oct 28 00:43 .viminfo u1001@f2-vm:/$ touch /mnt/my-file u1001@f2-vm:/$ setfacl -m u:1001:rwx /mnt/my-file u1001@f2-vm:/$ sudo setcap -n 1001 cap_net_raw+ep /mnt/my-file u1001@f2-vm:/$ ls -al /mnt/my-file -rw-rwxr--+ 1 u1001 u1001 0 Oct 28 22:14 /mnt/my-file u1001@f2-vm:/$ ls -al /home/ubuntu/my-file -rw-rwxr--+ 1 ubuntu ubuntu 0 Oct 28 22:14 /home/ubuntu/my-file u1001@f2-vm:/$ getfacl /mnt/my-file getfacl: Removing leading '/' from absolute path names # file: mnt/my-file # owner: u1001 # group: u1001 user::rw- user:u1001:rwx group::rw- mask::rwx other::r-- u1001@f2-vm:/$ getfacl /home/ubuntu/my-file getfacl: Removing leading '/' from absolute path names # file: home/ubuntu/my-file # owner: ubuntu # group: ubuntu user::rw- user:ubuntu:rwx group::rw- mask::rwx other::r--" * tag 'idmapped-mounts-v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux: (41 commits) xfs: remove the possibly unused mp variable in xfs_file_compat_ioctl xfs: support idmapped mounts ext4: support idmapped mounts fat: handle idmapped mounts tests: add mount_setattr() selftests fs: introduce MOUNT_ATTR_IDMAP fs: add mount_setattr() fs: add attr_flags_to_mnt_flags helper fs: split out functions to hold writers namespace: only take read lock in do_reconfigure_mnt() mount: make {lock,unlock}_mount_hash() static namespace: take lock_mount_hash() directly when changing flags nfs: do not export idmapped mounts overlayfs: do not mount on top of idmapped mounts ecryptfs: do not mount on top of idmapped mounts ima: handle idmapped mounts apparmor: handle idmapped mounts fs: make helpers idmap mount aware exec: handle idmapped mounts would_dump: handle idmapped mounts ...
2021-02-12jffs2: check the validity of dstlen in jffs2_zlib_compress()Yang Yang1-0/+3
KASAN reports a BUG when download file in jffs2 filesystem.It is because when dstlen == 1, cpage_out will write array out of bounds. Actually, data will not be compressed in jffs2_zlib_compress() if data's length less than 4. [ 393.799778] BUG: KASAN: slab-out-of-bounds in jffs2_rtime_compress+0x214/0x2f0 at addr ffff800062e3b281 [ 393.809166] Write of size 1 by task tftp/2918 [ 393.813526] CPU: 3 PID: 2918 Comm: tftp Tainted: G B 4.9.115-rt93-EMBSYS-CGEL-6.1.R6-dirty #1 [ 393.823173] Hardware name: LS1043A RDB Board (DT) [ 393.827870] Call trace: [ 393.830322] [<ffff20000808c700>] dump_backtrace+0x0/0x2f0 [ 393.835721] [<ffff20000808ca04>] show_stack+0x14/0x20 [ 393.840774] [<ffff2000086ef700>] dump_stack+0x90/0xb0 [ 393.845829] [<ffff20000827b19c>] kasan_object_err+0x24/0x80 [ 393.851402] [<ffff20000827b404>] kasan_report_error+0x1b4/0x4d8 [ 393.857323] [<ffff20000827bae8>] kasan_report+0x38/0x40 [ 393.862548] [<ffff200008279d44>] __asan_store1+0x4c/0x58 [ 393.867859] [<ffff2000084ce2ec>] jffs2_rtime_compress+0x214/0x2f0 [ 393.873955] [<ffff2000084bb3b0>] jffs2_selected_compress+0x178/0x2a0 [ 393.880308] [<ffff2000084bb530>] jffs2_compress+0x58/0x478 [ 393.885796] [<ffff2000084c5b34>] jffs2_write_inode_range+0x13c/0x450 [ 393.892150] [<ffff2000084be0b8>] jffs2_write_end+0x2a8/0x4a0 [ 393.897811] [<ffff2000081f3008>] generic_perform_write+0x1c0/0x280 [ 393.903990] [<ffff2000081f5074>] __generic_file_write_iter+0x1c4/0x228 [ 393.910517] [<ffff2000081f5210>] generic_file_write_iter+0x138/0x288 [ 393.916870] [<ffff20000829ec1c>] __vfs_write+0x1b4/0x238 [ 393.922181] [<ffff20000829ff00>] vfs_write+0xd0/0x238 [ 393.927232] [<ffff2000082a1ba8>] SyS_write+0xa0/0x110 [ 393.932283] [<ffff20000808429c>] __sys_trace_return+0x0/0x4 [ 393.937851] Object at ffff800062e3b280, in cache kmalloc-64 size: 64 [ 393.944197] Allocated: [ 393.946552] PID = 2918 [ 393.948913] save_stack_trace_tsk+0x0/0x220 [ 393.953096] save_stack_trace+0x18/0x20 [ 393.956932] kasan_kmalloc+0xd8/0x188 [ 393.960594] __kmalloc+0x144/0x238 [ 393.963994] jffs2_selected_compress+0x48/0x2a0 [ 393.968524] jffs2_compress+0x58/0x478 [ 393.972273] jffs2_write_inode_range+0x13c/0x450 [ 393.976889] jffs2_write_end+0x2a8/0x4a0 [ 393.980810] generic_perform_write+0x1c0/0x280 [ 393.985251] __generic_file_write_iter+0x1c4/0x228 [ 393.990040] generic_file_write_iter+0x138/0x288 [ 393.994655] __vfs_write+0x1b4/0x238 [ 393.998228] vfs_write+0xd0/0x238 [ 394.001543] SyS_write+0xa0/0x110 [ 394.004856] __sys_trace_return+0x0/0x4 [ 394.008684] Freed: [ 394.010691] PID = 2918 [ 394.013051] save_stack_trace_tsk+0x0/0x220 [ 394.017233] save_stack_trace+0x18/0x20 [ 394.021069] kasan_slab_free+0x88/0x188 [ 394.024902] kfree+0x6c/0x1d8 [ 394.027868] jffs2_sum_write_sumnode+0x2c4/0x880 [ 394.032486] jffs2_do_reserve_space+0x198/0x598 [ 394.037016] jffs2_reserve_space+0x3f8/0x4d8 [ 394.041286] jffs2_write_inode_range+0xf0/0x450 [ 394.045816] jffs2_write_end+0x2a8/0x4a0 [ 394.049737] generic_perform_write+0x1c0/0x280 [ 394.054179] __generic_file_write_iter+0x1c4/0x228 [ 394.058968] generic_file_write_iter+0x138/0x288 [ 394.063583] __vfs_write+0x1b4/0x238 [ 394.067157] vfs_write+0xd0/0x238 [ 394.070470] SyS_write+0xa0/0x110 [ 394.073783] __sys_trace_return+0x0/0x4 [ 394.077612] Memory state around the buggy address: [ 394.082404] ffff800062e3b180: 00 00 00 00 00 00 00 00 fc fc fc fc fc fc fc fc [ 394.089623] ffff800062e3b200: 00 00 00 00 00 00 00 00 fc fc fc fc fc fc fc fc [ 394.096842] >ffff800062e3b280: 01 fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 394.104056] ^ [ 394.107283] ffff800062e3b300: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc [ 394.114502] ffff800062e3b380: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc [ 394.121718] ================================================================== Signed-off-by: Yang Yang <yang.yang29@zte.com.cn> Signed-off-by: Richard Weinberger <richard@nod.at>
2021-02-12jffs2: fix use after free in jffs2_sum_write_data()Tom Rix1-0/+3
clang static analysis reports this problem fs/jffs2/summary.c:794:31: warning: Use of memory after it is freed c->summary->sum_list_head = temp->u.next; ^~~~~~~~~~~~ In jffs2_sum_write_data(), in a loop summary data is handles a node at a time. When it has written out the node it is removed the summary list, and the node is deleted. In the corner case when a JFFS2_FEATURE_RWCOMPAT_COPY is seen, a call is made to jffs2_sum_disable_collecting(). jffs2_sum_disable_collecting() deletes the whole list which conflicts with the loop's deleting the list by parts. To preserve the old behavior of stopping the write midway, bail out of the loop after disabling summary collection. Fixes: 6171586a7ae5 ("[JFFS2] Correct handling of JFFS2_FEATURE_RWCOMPAT_COPY nodes.") Signed-off-by: Tom Rix <trix@redhat.com> Reviewed-by: Nathan Chancellor <natechancellor@gmail.com> Signed-off-by: Richard Weinberger <richard@nod.at>
2021-01-24fs: make helpers idmap mount awareChristian Brauner5-17/+27
Extend some inode methods with an additional user namespace argument. A filesystem that is aware of idmapped mounts will receive the user namespace the mount has been marked with. This can be used for additional permission checking and also to enable filesystems to translate between uids and gids if they need to. We have implemented all relevant helpers in earlier patches. As requested we simply extend the exisiting inode method instead of introducing new ones. This is a little more code churn but it's mostly mechanical and doesnt't leave us with additional inode methods. Link: https://lore.kernel.org/r/20210121131959.646623-25-christian.brauner@ubuntu.com Cc: Christoph Hellwig <hch@lst.de> Cc: David Howells <dhowells@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: linux-fsdevel@vger.kernel.org Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
2021-01-24acl: handle idmapped mountsChristian Brauner5-2/+6
The posix acl permission checking helpers determine whether a caller is privileged over an inode according to the acls associated with the inode. Add helpers that make it possible to handle acls on idmapped mounts. The vfs and the filesystems targeted by this first iteration make use of posix_acl_fix_xattr_from_user() and posix_acl_fix_xattr_to_user() to translate basic posix access and default permissions such as the ACL_USER and ACL_GROUP type according to the initial user namespace (or the superblock's user namespace) to and from the caller's current user namespace. Adapt these two helpers to handle idmapped mounts whereby we either map from or into the mount's user namespace depending on in which direction we're translating. Similarly, cap_convert_nscap() is used by the vfs to translate user namespace and non-user namespace aware filesystem capabilities from the superblock's user namespace to the caller's user namespace. Enable it to handle idmapped mounts by accounting for the mount's user namespace. In addition the fileystems targeted in the first iteration of this patch series make use of the posix_acl_chmod() and, posix_acl_update_mode() helpers. Both helpers perform permission checks on the target inode. Let them handle idmapped mounts. These two helpers are called when posix acls are set by the respective filesystems to handle this case we extend the ->set() method to take an additional user namespace argument to pass the mount's user namespace down. Link: https://lore.kernel.org/r/20210121131959.646623-9-christian.brauner@ubuntu.com Cc: Christoph Hellwig <hch@lst.de> Cc: David Howells <dhowells@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: linux-fsdevel@vger.kernel.org Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
2021-01-24attr: handle idmapped mountsChristian Brauner1-1/+1
When file attributes are changed most filesystems rely on the setattr_prepare(), setattr_copy(), and notify_change() helpers for initialization and permission checking. Let them handle idmapped mounts. If the inode is accessed through an idmapped mount map it into the mount's user namespace. Afterwards the checks are identical to non-idmapped mounts. If the initial user namespace is passed nothing changes so non-idmapped mounts will see identical behavior as before. Helpers that perform checks on the ia_uid and ia_gid fields in struct iattr assume that ia_uid and ia_gid are intended values and have already been mapped correctly at the userspace-kernelspace boundary as we already do today. If the initial user namespace is passed nothing changes so non-idmapped mounts will see identical behavior as before. Link: https://lore.kernel.org/r/20210121131959.646623-8-christian.brauner@ubuntu.com Cc: Christoph Hellwig <hch@lst.de> Cc: David Howells <dhowells@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: linux-fsdevel@vger.kernel.org Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
2020-12-13jffs2: Fix NULL pointer dereference in rp_size fs option parsingJamie Iles1-5/+5
syzkaller found the following JFFS2 splat: Unable to handle kernel paging request at virtual address dfffa00000000001 Mem abort info: ESR = 0x96000004 EC = 0x25: DABT (current EL), IL = 32 bits SET = 0, FnV = 0 EA = 0, S1PTW = 0 Data abort info: ISV = 0, ISS = 0x00000004 CM = 0, WnR = 0 [dfffa00000000001] address between user and kernel address ranges Internal error: Oops: 96000004 [#1] SMP Dumping ftrace buffer: (ftrace buffer empty) Modules linked in: CPU: 0 PID: 12745 Comm: syz-executor.5 Tainted: G S 5.9.0-rc8+ #98 Hardware name: linux,dummy-virt (DT) pstate: 20400005 (nzCv daif +PAN -UAO BTYPE=--) pc : jffs2_parse_param+0x138/0x308 fs/jffs2/super.c:206 lr : jffs2_parse_param+0x108/0x308 fs/jffs2/super.c:205 sp : ffff000022a57910 x29: ffff000022a57910 x28: 0000000000000000 x27: ffff000057634008 x26: 000000000000d800 x25: 000000000000d800 x24: ffff0000271a9000 x23: ffffa0001adb5dc0 x22: ffff000023fdcf00 x21: 1fffe0000454af2c x20: ffff000024cc9400 x19: 0000000000000000 x18: 0000000000000000 x17: 0000000000000000 x16: ffffa000102dbdd0 x15: 0000000000000000 x14: ffffa000109e44bc x13: ffffa00010a3a26c x12: ffff80000476e0b3 x11: 1fffe0000476e0b2 x10: ffff80000476e0b2 x9 : ffffa00010a3ad60 x8 : ffff000023b70593 x7 : 0000000000000003 x6 : 00000000f1f1f1f1 x5 : ffff000023fdcf00 x4 : 0000000000000002 x3 : ffffa00010000000 x2 : 0000000000000001 x1 : dfffa00000000000 x0 : 0000000000000008 Call trace: jffs2_parse_param+0x138/0x308 fs/jffs2/super.c:206 vfs_parse_fs_param+0x234/0x4e8 fs/fs_context.c:117 vfs_parse_fs_string+0xe8/0x148 fs/fs_context.c:161 generic_parse_monolithic+0x17c/0x208 fs/fs_context.c:201 parse_monolithic_mount_data+0x7c/0xa8 fs/fs_context.c:649 do_new_mount fs/namespace.c:2871 [inline] path_mount+0x548/0x1da8 fs/namespace.c:3192 do_mount+0x124/0x138 fs/namespace.c:3205 __do_sys_mount fs/namespace.c:3413 [inline] __se_sys_mount fs/namespace.c:3390 [inline] __arm64_sys_mount+0x164/0x238 fs/namespace.c:3390 __invoke_syscall arch/arm64/kernel/syscall.c:36 [inline] invoke_syscall arch/arm64/kernel/syscall.c:48 [inline] el0_svc_common.constprop.0+0x15c/0x598 arch/arm64/kernel/syscall.c:149 do_el0_svc+0x60/0x150 arch/arm64/kernel/syscall.c:195 el0_svc+0x34/0xb0 arch/arm64/kernel/entry-common.c:226 el0_sync_handler+0xc8/0x5b4 arch/arm64/kernel/entry-common.c:236 el0_sync+0x15c/0x180 arch/arm64/kernel/entry.S:663 Code: d2d40001 f2fbffe1 91002260 d343fc02 (38e16841) ---[ end trace 4edf690313deda44 ]--- This is because since ec10a24f10c8, the option parsing happens before fill_super and so the MTD device isn't associated with the filesystem. Defer the size check until there is a valid association. Fixes: ec10a24f10c8 ("vfs: Convert jffs2 to use the new mount API") Cc: <stable@vger.kernel.org> Cc: David Howells <dhowells@redhat.com> Signed-off-by: Jamie Iles <jamie@nuviainc.com> Signed-off-by: Richard Weinberger <richard@nod.at>
2020-12-13jffs2: remove trailing semicolon in macro definitionTom Rix1-2/+2
The macro use will already have a semicolon. Signed-off-by: Tom Rix <trix@redhat.com> Signed-off-by: Richard Weinberger <richard@nod.at>
2020-12-13jffs2: Allow setting rp_size to zero during remountinglizhe2-2/+6
Set rp_size to zero will be ignore during remounting. The method to identify whether we input a remounting option of rp_size is to check if the rp_size input is zero. It can not work well if we pass "rp_size=0". This patch add a bool variable "set_rp_size" to fix this problem. Reported-by: Jubin Zhong <zhongjubin@huawei.com> Signed-off-by: lizhe <lizhe67@huawei.com> Signed-off-by: Richard Weinberger <richard@nod.at>
2020-12-13jffs2: Fix ignoring mounting options problem during remountinglizhe1-0/+17
The jffs2 mount options will be ignored when remounting jffs2. It can be easily reproduced with the steps listed below. 1. mount -t jffs2 -o compr=none /dev/mtdblockx /mnt 2. mount -o remount compr=zlib /mnt Since ec10a24f10c8, the option parsing happens before fill_super and then pass fc, which contains the options parsing results, to function jffs2_reconfigure during remounting. But function jffs2_reconfigure do not update c->mount_opts. This patch add a function jffs2_update_mount_opts to fix this problem. By the way, I notice that tmpfs use the same way to update remounting options. If it is necessary to unify them? Cc: <stable@vger.kernel.org> Fixes: ec10a24f10c8 ("vfs: Convert jffs2 to use the new mount API") Signed-off-by: lizhe <lizhe67@huawei.com> Signed-off-by: Richard Weinberger <richard@nod.at>
2020-12-13jffs2: Fix GC exit abnormallyZhe Li1-0/+16
The log of this problem is: jffs2: Error garbage collecting node at 0x***! jffs2: No space for garbage collection. Aborting GC thread This is because GC believe that it do nothing, so it abort. After going over the image of jffs2, I find a scene that can trigger this problem stably. The scene is: there is a normal dirent node at summary-area, but abnormal at corresponding not-summary-area with error name_crc. The reason that GC exit abnormally is because it find that abnormal dirent node to GC, but when it goes to function jffs2_add_fd_to_list, it cannot meet the condition listed below: if ((*prev)->nhash == new->nhash && !strcmp((*prev)->name, new->name)) So no node is marked obsolete, statistical information of erase_block do not change, which cause GC exit abnormally. The root cause of this problem is: we do not check the name_crc of the abnormal dirent node with summary is enabled. Noticed that in function jffs2_scan_dirent_node, we use function jffs2_scan_dirty_space to deal with the dirent node with error name_crc. So this patch add a checking code in function read_direntry to ensure the correctness of dirent node. If checked failed, the dirent node will be marked obsolete so GC will pass this node and this problem will be fixed. Cc: <stable@vger.kernel.org> Signed-off-by: Zhe Li <lizhe67@huawei.com> Signed-off-by: Richard Weinberger <richard@nod.at>
2020-12-13jffs2: Fix if/else empty body warningsRandy Dunlap1-11/+12
When debug (print) macros are not enabled, change them to use the no_printk() macro instead of <nothing>. This fixes gcc warnings when -Wextra is used: ../fs/jffs2/nodelist.c:255:37: warning: suggest braces around empty body in an ‘else’ statement [-Wempty-body] ../fs/jffs2/nodelist.c:278:38: warning: suggest braces around empty body in an ‘else’ statement [-Wempty-body] ../fs/jffs2/nodelist.c:558:52: warning: suggest braces around empty body in an ‘else’ statement [-Wempty-body] ../fs/jffs2/xattr.c:1247:58: warning: suggest braces around empty body in an ‘if’ statement [-Wempty-body] ../fs/jffs2/xattr.c:1281:65: warning: suggest braces around empty body in an ‘if’ statement [-Wempty-body] Builds without warnings on all 3 levels of CONFIG_JFFS2_FS_DEBUG. Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Richard Weinberger <richard@nod.at> Cc: linux-mtd@lists.infradead.org Signed-off-by: Richard Weinberger <richard@nod.at>
2020-08-24treewide: Use fallthrough pseudo-keywordGustavo A. R. Silva2-2/+2
Replace the existing /* fall through */ comments and its variants with the new pseudo-keyword macro fallthrough[1]. Also, remove unnecessary fall-through markings when it is the case. [1] https://www.kernel.org/doc/html/v5.7/process/deprecated.html?highlight=fallthrough#implicit-switch-case-fall-through Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
2020-08-11Merge tag 'for-linus-5.9-rc1' of ↵Linus Torvalds2-2/+7
git://git.kernel.org/pub/scm/linux/kernel/git/rw/ubifs Pull JFFS2, UBI and UBIFS updates from Richard Weinberger: "JFFS2: - Fix for a corner case while mounting - Fix for an use-after-free issue UBI: - Fix for a memory load while attaching - Don't produce an anchor PEB with fastmap being disabled UBIFS: - Fix for orphan inode logic - Spelling fixes - New mount option to specify filesystem version" * tag 'for-linus-5.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/ubifs: jffs2: fix UAF problem jffs2: fix jffs2 mounting failure ubifs: Fix wrong orphan node deletion in ubifs_jnl_update|rename ubi: fastmap: Free fastmap next anchor peb during detach ubi: fastmap: Don't produce the initial next anchor PEB when fastmap is disabled ubifs: misc.h: delete a duplicated word ubifs: add option to specify version for new file systems
2020-08-03jffs2: fix UAF problemZhe Li1-1/+5
The log of UAF problem is listed below. BUG: KASAN: use-after-free in jffs2_rmdir+0xa4/0x1cc [jffs2] at addr c1f165fc Read of size 4 by task rm/8283 ============================================================================= BUG kmalloc-32 (Tainted: P B O ): kasan: bad access detected ----------------------------------------------------------------------------- INFO: Allocated in 0xbbbbbbbb age=3054364 cpu=0 pid=0 0xb0bba6ef jffs2_write_dirent+0x11c/0x9c8 [jffs2] __slab_alloc.isra.21.constprop.25+0x2c/0x44 __kmalloc+0x1dc/0x370 jffs2_write_dirent+0x11c/0x9c8 [jffs2] jffs2_do_unlink+0x328/0x5fc [jffs2] jffs2_rmdir+0x110/0x1cc [jffs2] vfs_rmdir+0x180/0x268 do_rmdir+0x2cc/0x300 ret_from_syscall+0x0/0x3c INFO: Freed in 0x205b age=3054364 cpu=0 pid=0 0x2e9173 jffs2_add_fd_to_list+0x138/0x1dc [jffs2] jffs2_add_fd_to_list+0x138/0x1dc [jffs2] jffs2_garbage_collect_dirent.isra.3+0x21c/0x288 [jffs2] jffs2_garbage_collect_live+0x16bc/0x1800 [jffs2] jffs2_garbage_collect_pass+0x678/0x11d4 [jffs2] jffs2_garbage_collect_thread+0x1e8/0x3b0 [jffs2] kthread+0x1a8/0x1b0 ret_from_kernel_thread+0x5c/0x64 Call Trace: [c17ddd20] [c02452d4] kasan_report.part.0+0x298/0x72c (unreliable) [c17ddda0] [d2509680] jffs2_rmdir+0xa4/0x1cc [jffs2] [c17dddd0] [c026da04] vfs_rmdir+0x180/0x268 [c17dde00] [c026f4e4] do_rmdir+0x2cc/0x300 [c17ddf40] [c001a658] ret_from_syscall+0x0/0x3c The root cause is that we don't get "jffs2_inode_info.sem" before we scan list "jffs2_inode_info.dents" in function jffs2_rmdir. This patch add codes to get "jffs2_inode_info.sem" before we scan "jffs2_inode_info.dents" to slove the UAF problem. Signed-off-by: Zhe Li <lizhe67@huawei.com> Reviewed-by: Hou Tao <houtao1@huawei.com> Signed-off-by: Richard Weinberger <richard@nod.at>
2020-08-03jffs2: fix jffs2 mounting failureZhe Li1-1/+2
Thanks for the advice mentioned in the email. This is my v3 patch for this problem. Mounting jffs2 on nand flash will get message "failed: I/O error" with the steps listed below. 1.umount jffs2 2.erase nand flash 3.mount jffs2 on it (this mounting operation will be successful) 4.do chown or chmod to the mount point directory 5.umount jffs2 6.mount jffs2 on nand flash After step 6, we will get message "mount ... failed: I/O error". Typical image of this problem is like: Empty space found from 0x00000000 to 0x008a0000 Inode node at xx, totlen 0x00000044, #ino 1, version 1, isize 0... The reason for this mounting failure is that at the end of function jffs2_scan_medium(), jffs2 will check the used_size and some info of nr_blocks.If conditions are met, it will return -EIO. The detail is that, in the steps listed above, step 4 will write jffs2_raw_inode into flash without jffs2_raw_dirent, which will cause that there are some jffs2_raw_inode but no jffs2_raw_dirent on flash. This will meet the condition at the end of function jffs2_scan_medium() and return -EIO if we umount jffs2 and mount it again. We notice that jffs2 add the value of c->unchecked_size if we find an inode node while mounting. And jffs2 will never add the value of c->unchecked_size in other situations. So this patch add one more condition about c->unchecked_size of the judgement to fix this problem. Signed-off-by: Zhe Li <lizhe67@huawei.com> Signed-off-by: Richard Weinberger <richard@nod.at>
2020-07-16treewide: Remove uninitialized_var() usageKees Cook1-1/+1
Using uninitialized_var() is dangerous as it papers over real bugs[1] (or can in the future), and suppresses unrelated compiler warnings (e.g. "unused variable"). If the compiler thinks it is uninitialized, either simply initialize the variable or make compiler changes. In preparation for removing[2] the[3] macro[4], remove all remaining needless uses with the following script: git grep '\buninitialized_var\b' | cut -d: -f1 | sort -u | \ xargs perl -pi -e \ 's/\buninitialized_var\(([^\)]+)\)/\1/g; s:\s*/\* (GCC be quiet|to make compiler happy) \*/$::g;' drivers/video/fbdev/riva/riva_hw.c was manually tweaked to avoid pathological white-space. No outstanding warnings were found building allmodconfig with GCC 9.3.0 for x86_64, i386, arm64, arm, powerpc, powerpc64le, s390x, mips, sparc64, alpha, and m68k. [1] https://lore.kernel.org/lkml/20200603174714.192027-1-glider@google.com/ [2] https://lore.kernel.org/lkml/CA+55aFw+Vbj0i=1TGqCR5vQkCzWJ0QxK6CernOU6eedsudAixw@mail.gmail.com/ [3] https://lore.kernel.org/lkml/CA+55aFwgbgqhbp1fkxvRKEpzyR5J8n1vKT1VZdz9knmPuXhOeg@mail.gmail.com/ [4] https://lore.kernel.org/lkml/CA+55aFz2500WfbKXAx8s67wrm9=yVJu65TpLgN_ybYNv0VEOKA@mail.gmail.com/ Reviewed-by: Leon Romanovsky <leonro@mellanox.com> # drivers/infiniband and mlx4/mlx5 Acked-by: Jason Gunthorpe <jgg@mellanox.com> # IB Acked-by: Kalle Valo <kvalo@codeaurora.org> # wireless drivers Reviewed-by: Chao Yu <yuchao0@huawei.com> # erofs Signed-off-by: Kees Cook <keescook@chromium.org>
2020-06-16jffs2: Replace zero-length array with flexible-arrayGustavo A. R. Silva2-3/+3
There is a regular need in the kernel to provide a way to declare having a dynamically sized set of trailing elements in a structure. Kernel code should always use “flexible array members”[1] for these cases. The older style of one-element or zero-length arrays should no longer be used[2]. [1] https://en.wikipedia.org/wiki/Flexible_array_member [2] https://github.com/KSPP/linux/issues/21 Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
2020-02-07fs_parse: fold fs_parameter_desc/fs_parameter_specAl Viro1-7/+3
The former contains nothing but a pointer to an array of the latter... Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2020-02-07fs_parser: remove fs_parameter_description name fieldEric Sandeen1-1/+0
Unused now. Signed-off-by: Eric Sandeen <sandeen@redhat.com> Acked-by: David Howells <dhowells@redhat.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2020-02-07fold struct fs_parameter_enum into struct constant_tableAl Viro1-1/+1
no real difference now Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2020-02-07fs_parse: get rid of ->enumsAl Viro1-11/+10
Don't do a single array; attach them to fsparam_enum() entry instead. And don't bother trying to embed the names into those - it actually loses memory, with no real speedup worth mentioning. Simplifies validation as well. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2019-11-29Revert "jffs2: Fix possible null-pointer dereferences in ↵Joel Stanley1-1/+1
jffs2_add_frag_to_fragtree()" This reverts commit f2538f999345405f7d2e1194c0c8efa4e11f7b3a. The patch stopped JFFS2 from being able to mount an existing filesystem with the following errors: jffs2: error: (77) jffs2_build_inode_fragtree: Add node to tree failed -22 jffs2: error: (77) jffs2_do_read_inode_internal: Failed to build final fragtree for inode #5377: error -22 Fixes: f2538f999345 ("jffs2: Fix possible null-pointer dereferences...") Cc: stable@vger.kernel.org Suggested-by: Hou Tao <houtao1@huawei.com> Signed-off-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Richard Weinberger <richard@nod.at>
2019-09-26Merge branch 'work.mount3' of ↵Linus Torvalds1-2/+0
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull jffs2 fix from Al Viro: "braino fix for mount API conversion for jffs2" * 'work.mount3' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: jffs2: Fix mounting under new mount API
2019-09-26jffs2: Fix mounting under new mount APIDavid Howells1-2/+0
The mounting of jffs2 is broken due to the changes from the new mount API because it specifies a "source" operation, but then doesn't actually process it. But because it specified it, it doesn't return -ENOPARAM and the caller doesn't process it either and the source gets lost. Fix this by simply removing the source parameter from jffs2 and letting the VFS deal with it in the default manner. To test it, enable CONFIG_MTD_MTDRAM and allow the default size and erase block size parameters, then try and mount the /dev/mtdblock<N> file that that creates as jffs2. No need to initialise it. Fixes: ec10a24f10c8 ("vfs: Convert jffs2 to use the new mount API") Reported-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: David Howells <dhowells@redhat.com> cc: David Woodhouse <dwmw2@infradead.org> cc: Richard Weinberger <richard@nod.at> cc: linux-mtd@lists.infradead.org Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2019-09-21Merge tag 'upstream-5.4-rc1' of ↵Linus Torvalds5-40/+18
git://git.kernel.org/pub/scm/linux/kernel/git/rw/ubifs Pull UBI, UBIFS and JFFS2 updates from Richard Weinberger: "UBI: - Be less stupid when placing a fastmap anchor - Try harder to get an empty PEB in case of contention - Make ubiblock to warn if image is not a multiple of 512 UBIFS: - Various fixes in error paths JFFS2: - Various fixes in error paths" * tag 'upstream-5.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/ubifs: jffs2: Fix memory leak in jffs2_scan_eraseblock() error path jffs2: Remove jffs2_gc_fetch_page and jffs2_gc_release_page jffs2: Fix possible null-pointer dereferences in jffs2_add_frag_to_fragtree() ubi: block: Warn if volume size is not multiple of 512 ubifs: Fix memory leak bug in alloc_ubifs_info() error path ubifs: Fix memory leak in __ubifs_node_verify_hmac error path ubifs: Fix memory leak in read_znode() error path ubi: ubi_wl_get_peb: Increase the number of attempts while getting PEB ubi: Don't do anchor move within fastmap area ubifs: Remove redundant assignment to pointer fname
2019-09-19Merge branch 'work.mount2' of ↵Linus Torvalds3-101/+96
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull misc mount API conversions from Al Viro: "Conversions to new API for shmem and friends and for mount_mtd()-using filesystems. As for the rest of the mount API conversions in -next, some of them belong in the individual trees (e.g. binderfs one should definitely go through android folks, after getting redone on top of their changes). I'm going to drop those and send the rest (trivial ones + stuff ACKed by maintainers) in a separate series - by that point they are independent from each other. Some stuff has already migrated into individual trees (NFS conversion, for example, or FUSE stuff, etc.); those presumably will go through the regular merges from corresponding trees." * 'work.mount2' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: vfs: Make fs_parse() handle fs_param_is_fd-type params better vfs: Convert ramfs, shmem, tmpfs, devtmpfs, rootfs to use the new mount API shmem_parse_one(): switch to use of fs_parse() shmem_parse_options(): take handling a single option into a helper shmem_parse_options(): don't bother with mpol in separate variable shmem_parse_options(): use a separate structure to keep the results make shmem_fill_super() static make ramfs_fill_super() static devtmpfs: don't mix {ramfs,shmem}_fill_super() with mount_single() vfs: Convert squashfs to use the new mount API mtd: Kill mount_mtd() vfs: Convert jffs2 to use the new mount API vfs: Convert cramfs to use the new mount API vfs: Convert romfs to use the new mount API vfs: Add a single-or-reconfig keying to vfs_get_super()
2019-09-15jffs2: Fix memory leak in jffs2_scan_eraseblock() error pathWenwen Wang1-1/+4
In jffs2_scan_eraseblock(), 'sumptr' is allocated through kmalloc() if 'sumlen' is larger than 'buf_size'. However, it is not deallocated in the following execution if jffs2_fill_scan_buf() fails, leading to a memory leak bug. To fix this issue, free 'sumptr' before returning the error. Signed-off-by: Wenwen Wang <wenwen@cs.uga.edu> Signed-off-by: Richard Weinberger <richard@nod.at>
2019-09-15jffs2: Remove jffs2_gc_fetch_page and jffs2_gc_release_pageChristoph Hellwig3-38/+13
Merge these two helpers into the only callers to get rid of some amazingly bad calling conventions. Suggested-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Richard Weinberger <richard@nod.at>
2019-09-15jffs2: Fix possible null-pointer dereferences in jffs2_add_frag_to_fragtree()Jia-Ju Bai1-1/+1
In jffs2_add_frag_to_fragtree(), there is an if statement on line 223 to check whether "this" is NULL: if (this) When "this" is NULL, it is used at several places, such as on line 249: if (this->node) and on line 260: if (newfrag->ofs > this->ofs) Thus possible null-pointer dereferences may occur. To fix these bugs, -EINVAL is returned when "this" is NULL. These bugs are found by a static analysis tool STCheck written by us. Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com> Signed-off-by: Richard Weinberger <richard@nod.at>
2019-09-05vfs: Convert jffs2 to use the new mount APIDavid Howells3-101/+96
Convert the jffs2 filesystem to the new internal mount API as the old one will be obsoleted and removed. This allows greater flexibility in communication of mount parameters between userspace, the VFS and the filesystem. See Documentation/filesystems/mount_api.txt for more information. Signed-off-by: David Howells <dhowells@redhat.com> cc: David Woodhouse <dwmw2@infradead.org> cc: linux-mtd@lists.infradead.org Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2019-08-30fs: Fill in max and min timestamps in superblockDeepa Dinamani1-0/+3
Fill in the appropriate limits to avoid inconsistencies in the vfs cached inode times when timestamps are outside the permitted range. Even though some filesystems are read-only, fill in the timestamps to reflect the on-disk representation. Signed-off-by: Deepa Dinamani <deepa.kernel@gmail.com> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Acked-By: Tigran Aivazian <aivazian.tigran@gmail.com> Acked-by: Jeff Layton <jlayton@kernel.org> Cc: aivazian.tigran@gmail.com Cc: al@alarsen.net Cc: coda@cs.cmu.edu Cc: darrick.wong@oracle.com Cc: dushistov@mail.ru Cc: dwmw2@infradead.org Cc: hch@infradead.org Cc: jack@suse.com Cc: jaharkes@cs.cmu.edu Cc: luisbg@kernel.org Cc: nico@fluxnic.net Cc: phillip@squashfs.org.uk Cc: richard@nod.at Cc: salah.triki@gmail.com Cc: shaggy@kernel.org Cc: linux-xfs@vger.kernel.org Cc: codalist@coda.cs.cmu.edu Cc: linux-ext4@vger.kernel.org Cc: linux-mtd@lists.infradead.org Cc: jfs-discussion@lists.sourceforge.net Cc: reiserfs-devel@vger.kernel.org
2019-07-12jffs2: pass the correct prototype to read_cache_pageChristoph Hellwig3-4/+4
Fix the callback jffs2 passes to read_cache_page to actually have the proper type expected. Casting around function pointers can easily hide typing bugs, and defeats control flow protection. Link: http://lkml.kernel.org/r/20190520055731.24538-4-hch@lst.de Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Kees Cook <keescook@chromium.org> Cc: Nick Desaulniers <ndesaulniers@google.com> Cc: Sami Tolvanen <samitolvanen@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-05-21treewide: Add SPDX license identifier - Makefile/KconfigThomas Gleixner1-0/+1
Add SPDX license identifiers to all Make/Kconfig files which: - Have no license information of any form These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0-only Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-07Merge tag 'Wimplicit-fallthrough-5.2-rc1' of ↵Linus Torvalds1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux Pull Wimplicit-fallthrough updates from Gustavo A. R. Silva: "Mark switch cases where we are expecting to fall through. This is part of the ongoing efforts to enable -Wimplicit-fallthrough. Most of them have been baking in linux-next for a whole development cycle. And with Stephen Rothwell's help, we've had linux-next nag-emails going out for newly introduced code that triggers -Wimplicit-fallthrough to avoid gaining more of these cases while we work to remove the ones that are already present. We are getting close to completing this work. Currently, there are only 32 of 2311 of these cases left to be addressed in linux-next. I'm auditing every case; I take a look into the code and analyze it in order to determine if I'm dealing with an actual bug or a false positive, as explained here: https://lore.kernel.org/lkml/c2fad584-1705-a5f2-d63c-824e9b96cf50@embeddedor.com/ While working on this, I've found and fixed the several missing break/return bugs, some of them introduced more than 5 years ago. Once this work is finished, we'll be able to universally enable "-Wimplicit-fallthrough" to avoid any of these kinds of bugs from entering the kernel again" * tag 'Wimplicit-fallthrough-5.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux: (27 commits) memstick: mark expected switch fall-throughs drm/nouveau/nvkm: mark expected switch fall-throughs NFC: st21nfca: Fix fall-through warnings NFC: pn533: mark expected switch fall-throughs block: Mark expected switch fall-throughs ASN.1: mark expected switch fall-through lib/cmdline.c: mark expected switch fall-throughs lib: zstd: Mark expected switch fall-throughs scsi: sym53c8xx_2: sym_nvram: Mark expected switch fall-through scsi: sym53c8xx_2: sym_hipd: mark expected switch fall-throughs scsi: ppa: mark expected switch fall-through scsi: osst: mark expected switch fall-throughs scsi: lpfc: lpfc_scsi: Mark expected switch fall-throughs scsi: lpfc: lpfc_nvme: Mark expected switch fall-through scsi: lpfc: lpfc_nportdisc: Mark expected switch fall-through scsi: lpfc: lpfc_hbadisc: Mark expected switch fall-throughs scsi: lpfc: lpfc_els: Mark expected switch fall-throughs scsi: lpfc: lpfc_ct: Mark expected switch fall-throughs scsi: imm: mark expected switch fall-throughs scsi: csiostor: csio_wr: mark expected switch fall-through ...
2019-05-02jffs2: switch to ->free_inode()Al Viro1-8/+2
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2019-04-09fs: mark expected switch fall-throughsGustavo A. R. Silva1-0/+1
In preparation to enabling -Wimplicit-fallthrough, mark switch cases where we are expecting to fall through. This patch fixes the following warnings: fs/affs/affs.h:124:38: warning: this statement may fall through [-Wimplicit-fallthrough=] fs/configfs/dir.c:1692:11: warning: this statement may fall through [-Wimplicit-fallthrough=] fs/configfs/dir.c:1694:7: warning: this statement may fall through [-Wimplicit-fallthrough=] fs/ceph/file.c:249:3: warning: this statement may fall through [-Wimplicit-fallthrough=] fs/ext4/hash.c:233:15: warning: this statement may fall through [-Wimplicit-fallthrough=] fs/ext4/hash.c:246:15: warning: this statement may fall through [-Wimplicit-fallthrough=] fs/ext2/inode.c:1237:7: warning: this statement may fall through [-Wimplicit-fallthrough=] fs/ext2/inode.c:1244:7: warning: this statement may fall through [-Wimplicit-fallthrough=] fs/ext4/indirect.c:1182:6: warning: this statement may fall through [-Wimplicit-fallthrough=] fs/ext4/indirect.c:1188:6: warning: this statement may fall through [-Wimplicit-fallthrough=] fs/ext4/indirect.c:1432:6: warning: this statement may fall through [-Wimplicit-fallthrough=] fs/ext4/indirect.c:1440:6: warning: this statement may fall through [-Wimplicit-fallthrough=] fs/f2fs/node.c:618:8: warning: this statement may fall through [-Wimplicit-fallthrough=] fs/f2fs/node.c:620:8: warning: this statement may fall through [-Wimplicit-fallthrough=] fs/btrfs/ref-verify.c:522:15: warning: this statement may fall through [-Wimplicit-fallthrough=] fs/gfs2/bmap.c:711:7: warning: this statement may fall through [-Wimplicit-fallthrough=] fs/gfs2/bmap.c:722:7: warning: this statement may fall through [-Wimplicit-fallthrough=] fs/jffs2/fs.c:339:6: warning: this statement may fall through [-Wimplicit-fallthrough=] fs/nfsd/nfs4proc.c:429:12: warning: this statement may fall through [-Wimplicit-fallthrough=] fs/ufs/util.h:62:6: warning: this statement may fall through [-Wimplicit-fallthrough=] fs/ufs/util.h:43:6: warning: this statement may fall through [-Wimplicit-fallthrough=] fs/fcntl.c:770:7: warning: this statement may fall through [-Wimplicit-fallthrough=] fs/seq_file.c:319:10: warning: this statement may fall through [-Wimplicit-fallthrough=] fs/libfs.c:148:11: warning: this statement may fall through [-Wimplicit-fallthrough=] fs/libfs.c:150:7: warning: this statement may fall through [-Wimplicit-fallthrough=] fs/signalfd.c:178:7: warning: this statement may fall through [-Wimplicit-fallthrough=] fs/locks.c:1473:16: warning: this statement may fall through [-Wimplicit-fallthrough=] Warning level 3 was used: -Wimplicit-fallthrough=3 This patch is part of the ongoing efforts to enabling -Wimplicit-fallthrough. Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
2019-04-01jffs2: fix use-after-free on symlink traversalAl Viro2-6/+4
free the symlink body after the same RCU delay we have for freeing the struct inode itself, so that traversal during RCU pathwalk wouldn't step into freed memory. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2018-12-02jffs2: Fix use of uninitialized delayed_work, lockdep breakageDaniel Santos1-1/+2
jffs2_sync_fs makes the assumption that if CONFIG_JFFS2_FS_WRITEBUFFER is defined then a write buffer is available and has been initialized. However, this does is not the case when the mtd device has no out-of-band buffer: int jffs2_nand_flash_setup(struct jffs2_sb_info *c) { if (!c->mtd->oobsize) return 0; ... The resulting call to cancel_delayed_work_sync passing a uninitialized (but zeroed) delayed_work struct forces lockdep to become disabled. [ 90.050639] overlayfs: upper fs does not support tmpfile. [ 90.652264] INFO: trying to register non-static key. [ 90.662171] the code is fine but needs lockdep annotation. [ 90.673090] turning off the locking correctness validator. [ 90.684021] CPU: 0 PID: 1762 Comm: mount_root Not tainted 4.14.63 #0 [ 90.696672] Stack : 00000000 00000000 80d8f6a2 00000038 805f0000 80444600 8fe364f4 805dfbe7 [ 90.713349] 80563a30 000006e2 8068370c 00000001 00000000 00000001 8e2fdc48 ffffffff [ 90.730020] 00000000 00000000 80d90000 00000000 00000106 00000000 6465746e 312e3420 [ 90.746690] 6b636f6c 03bf0000 f8000000 20676e69 00000000 80000000 00000000 8e2c2a90 [ 90.763362] 80d90000 00000001 00000000 8e2c2a90 00000003 80260dc0 08052098 80680000 [ 90.780033] ... [ 90.784902] Call Trace: [ 90.789793] [<8000f0d8>] show_stack+0xb8/0x148 [ 90.798659] [<8005a000>] register_lock_class+0x270/0x55c [ 90.809247] [<8005cb64>] __lock_acquire+0x13c/0xf7c [ 90.818964] [<8005e314>] lock_acquire+0x194/0x1dc [ 90.828345] [<8003f27c>] flush_work+0x200/0x24c [ 90.837374] [<80041dfc>] __cancel_work_timer+0x158/0x210 [ 90.847958] [<801a8770>] jffs2_sync_fs+0x20/0x54 [ 90.857173] [<80125cf4>] iterate_supers+0xf4/0x120 [ 90.866729] [<80158fc4>] sys_sync+0x44/0x9c [ 90.875067] [<80014424>] syscall_common+0x34/0x58 Signed-off-by: Daniel Santos <daniel.santos@pobox.com> Reviewed-by: Hou Tao <houtao1@huawei.com> Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
2018-10-24Merge branch 'siginfo-linus' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace Pull siginfo updates from Eric Biederman: "I have been slowly sorting out siginfo and this is the culmination of that work. The primary result is in several ways the signal infrastructure has been made less error prone. The code has been updated so that manually specifying SEND_SIG_FORCED is never necessary. The conversion to the new siginfo sending functions is now complete, which makes it difficult to send a signal without filling in the proper siginfo fields. At the tail end of the patchset comes the optimization of decreasing the size of struct siginfo in the kernel from 128 bytes to about 48 bytes on 64bit. The fundamental observation that enables this is by definition none of the known ways to use struct siginfo uses the extra bytes. This comes at the cost of a small user space observable difference. For the rare case of siginfo being injected into the kernel only what can be copied into kernel_siginfo is delivered to the destination, the rest of the bytes are set to 0. For cases where the signal and the si_code are known this is safe, because we know those bytes are not used. For cases where the signal and si_code combination is unknown the bits that won't fit into struct kernel_siginfo are tested to verify they are zero, and the send fails if they are not. I made an extensive search through userspace code and I could not find anything that would break because of the above change. If it turns out I did break something it will take just the revert of a single change to restore kernel_siginfo to the same size as userspace siginfo. Testing did reveal dependencies on preferring the signo passed to sigqueueinfo over si->signo, so bit the bullet and added the complexity necessary to handle that case. Testing also revealed bad things can happen if a negative signal number is passed into the system calls. Something no sane application will do but something a malicious program or a fuzzer might do. So I have fixed the code that performs the bounds checks to ensure negative signal numbers are handled" * 'siginfo-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace: (80 commits) signal: Guard against negative signal numbers in copy_siginfo_from_user32 signal: Guard against negative signal numbers in copy_siginfo_from_user signal: In sigqueueinfo prefer sig not si_signo signal: Use a smaller struct siginfo in the kernel signal: Distinguish between kernel_siginfo and siginfo signal: Introduce copy_siginfo_from_user and use it's return value signal: Remove the need for __ARCH_SI_PREABLE_SIZE and SI_PAD_SIZE signal: Fail sigqueueinfo if si_signo != sig signal/sparc: Move EMT_TAGOVF into the generic siginfo.h signal/unicore32: Use force_sig_fault where appropriate signal/unicore32: Generate siginfo in ucs32_notify_die signal/unicore32: Use send_sig_fault where appropriate signal/arc: Use force_sig_fault where appropriate signal/arc: Push siginfo generation into unhandled_exception signal/ia64: Use force_sig_fault where appropriate signal/ia64: Use the force_sig(SIGSEGV,...) in ia64_rt_sigreturn signal/ia64: Use the generic force_sigsegv in setup_frame signal/arm/kvm: Use send_sig_mceerr signal/arm: Use send_sig_fault where appropriate signal/arm: Use force_sig_fault where appropriate ...
2018-10-16jffs2: free jffs2_sb_info through jffs2_kill_sb()Hou Tao1-3/+1
When an invalid mount option is passed to jffs2, jffs2_parse_options() will fail and jffs2_sb_info will be freed, but then jffs2_sb_info will be used (use-after-free) and freeed (double-free) in jffs2_kill_sb(). Fix it by removing the buggy invocation of kfree() when getting invalid mount options. Fixes: 92abc475d8de ("jffs2: implement mount option parsing and compression overriding") Cc: stable@kernel.org Signed-off-by: Hou Tao <houtao1@huawei.com> Reviewed-by: Richard Weinberger <richard@nod.at> Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>