summaryrefslogtreecommitdiff
path: root/fs/nfs/nfs3xdr.c
AgeCommit message (Collapse)AuthorFilesLines
2023-08-30NFS: Guard against READDIR loop when entry names exceed MAXNAMELENBenjamin Coddington1-1/+1
Commit 64cfca85bacd asserts the only valid return values for nfs2/3_decode_dirent should not include -ENAMETOOLONG, but for a server that sends a filename3 which exceeds MAXNAMELEN in a READDIR response the client's behavior will be to endlessly retry the operation. We could map -ENAMETOOLONG into -EBADCOOKIE, but that would produce truncated listings without any error. The client should return an error for this case to clearly assert that the server implementation must be corrected. Fixes: 64cfca85bacd ("NFS: Return valid errors from nfs2/3_decode_dirent()") Signed-off-by: Benjamin Coddington <bcodding@redhat.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2022-03-02NFS: Optimise away the previous cookie fieldTrond Myklebust1-1/+0
Replace the 'previous cookie' field in struct nfs_entry with the array->last_cookie. Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
2022-03-02NFSv4: Ask for a full XDR buffer of readdir goodnessTrond Myklebust1-3/+4
Instead of pretending that we know the ratio of directory info vs readdirplus attribute info, just set the 'dircount' field to the same value as the 'maxcount' field. Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
2022-02-28NFS: Return valid errors from nfs2/3_decode_dirent()Trond Myklebust1-15/+6
Valid return values for decode_dirent() callback functions are: 0: Success -EBADCOOKIE: End of directory -EAGAIN: End of xdr_stream All errors need to map into one of those three values. Fixes: 573c4e1ef53a ("NFS: Simplify ->decode_dirent() calling sequence") Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
2022-02-26NFS: NFSv2/v3 clients should never be setting NFS_CAP_XATTRTrond Myklebust1-0/+1
Ensure that we always initialise the 'xattr_support' field in struct nfs_fsinfo, so that nfs_server_set_fsinfo() doesn't declare our NFSv2/v3 client to be capable of supporting the NFSv4.2 xattr protocol by setting the NFS_CAP_XATTR capability. This configuration can cause nfs_do_access() to set access mode bits that are unsupported by the NFSv3 ACCESS call, which may confuse spec-compliant servers. Reported-by: Olga Kornievskaia <kolga@netapp.com> Fixes: b78ef845c35d ("NFSv4.2: query the server for extended attribute support") Cc: stable@vger.kernel.org Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
2021-10-04NFS: Default change_attr_type to NFS4_CHANGE_TYPE_IS_UNDEFINEDTrond Myklebust1-1/+1
Both NFSv3 and NFSv2 generate their change attribute from the ctime value that was supplied by the server. However the problem is that there are plenty of servers out there with ctime resolutions of 1ms or worse. In a modern performance system, this is insufficient when trying to decide which is the most recent set of attributes when, for instance, a READ or GETATTR call races with a WRITE or SETATTR. For this reason, let's revert to labelling the NFSv2/v3 change attributes as NFS4_CHANGE_TYPE_IS_UNDEFINED. This will ensure we protect against such races. Fixes: 7b24dacf0840 ("NFS: Another inode revalidation improvement") Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com> Tested-by: Chuck Lever <chuck.lever@oracle.com>
2021-04-14NFSv4: Catch and trace server filehandle encoding errorsTrond Myklebust1-2/+2
If the server returns a filehandle with an invalid length, then trace that, and return an EREMOTEIO error. Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
2021-04-13NFSv4: Add support for the NFSv4.2 "change_attr_type" attributeTrond Myklebust1-0/+1
The change_attr_type allows the server to provide a description of how the change attribute will behave. This again will allow the client to optimise its behaviour w.r.t. attribute revalidation. Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
2021-03-08NFS: Correct size calculation for create reply lengthFrank Sorenson1-1/+2
CREATE requests return a post_op_fh3, rather than nfs_fh3. The post_op_fh3 includes an extra word to indicate 'handle_follows'. Without that additional word, create fails when full 64-byte filehandles are in use. Add NFS3_post_op_fh_sz, and correct the size calculation for NFS3_createres_sz. Signed-off-by: Frank Sorenson <sorenson@redhat.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2020-12-02SUNRPC: Clean up the handling of page padding in rpc_prepare_reply_pages()Trond Myklebust1-13/+16
rpc_prepare_reply_pages() currently expects the 'hdrsize' argument to contain the length of the data that we expect to want placed in the head kvec plus a count of 1 word of padding that is placed after the page data. This is very confusing when trying to read the code, and sometimes leads to callers adding an arbitrary value of '1' just in order to satisfy the requirement (whether or not the page data actually needs such padding). This patch aims to clarify the code by changing the 'hdrsize' argument to remove that 1 word of padding. This means we need to subtract the padding from all the existing callers. Fixes: 02ef04e432ba ("NFS: Account for XDR pad of buf->pages") Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
2020-01-15NFS/pnfs: Fix pnfs_generic_prepare_to_resend_writes()Trond Myklebust1-1/+4
Instead of making assumptions about the commit verifier contents, change the commit code to ensure we always check that the verifier was set by the XDR code. Fixes: f54bcf2ecee9 ("pnfs: Prepare for flexfiles by pulling out common code") Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2019-11-04NFSv3: Clean up timespec encodeTrond Myklebust1-8/+4
Simplify the struct iattr timestamp encoding by skipping the step of an intermediate struct timespec. Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
2019-11-04NFS: Convert struct nfs_fattr to use struct timespec64Trond Myklebust1-1/+1
NFSv4 supports 64-bit times, so we should switch to using struct timespec64 when decoding attributes. Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
2019-07-09NFS: Record task, client ID, and XID in xdr_status trace pointsChuck Lever1-1/+1
When triggering an nfs_xdr_status trace point, record the task ID and XID of the failing RPC to better pinpoint the problem. This feels like a bit of a layering violation. Suggested-by: Trond Myklebust <trondmy@hammerspace.com> Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2019-04-26NFS: Convert NFSv3 to use the container user namespaceTrond Myklebust1-56/+86
When mapping NFS identities, we want to substitute for the uids and gids on the wire as we would for the AUTH_UNIX creds. Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2019-02-14NFS: Account for XDR pad of buf->pagesChuck Lever1-5/+5
Certain NFS results (eg. READLINK) might expect a data payload that is not an exact multiple of 4 bytes. In this case, XDR encoding is required to pad that payload so its length on the wire is a multiple of 4 bytes. The constants that define the maximum size of each NFS result do not appear to account for this extra word. In each case where the data payload is to be received into pages: - 1 word is added to the size of the receive buffer allocated by call_allocate - rpc_inline_rcv_pages subtracts 1 word from @hdrsize so that the extra buffer space falls into the rcv_buf's tail iovec - If buf->pagelen is word-aligned, an XDR pad is not needed and is thus removed from the tail Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2019-02-14SUNRPC: Introduce rpc_prepare_reply_pages()Chuck Lever1-22/+7
prepare_reply_buffer() and its NFSv4 equivalents expose the details of the RPC header and the auth slack values to upper layer consumers, creating a layering violation, and duplicating code. Remedy these issues by adding a new RPC client API that hides those details from upper layers in a common helper function. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2019-02-13NFS: Add trace events to report non-zero NFS status codesChuck Lever1-0/+7
These can help field troubleshooting without needing the overhead of a full network capture (ie, tcpdump). Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2019-02-13NFS: Remove print_overflow_msg()Chuck Lever1-116/+47
This issue is now captured by a trace point in the RPC client. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2018-09-30NFSv3: Improve NFSv3 performance when server returns no post-op attributesTrond Myklebust1-1/+5
When the server fails to return post-op attributes, the client's attempt to place read data directly in the page cache fails, and so we have to do an extra copy in order to realign the data with page borders. This patch attempts to detect servers that don't return post-op attributes on read (e.g. for pNFS) and adjusts the placement calculation accordingly. Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
2018-09-30SUNRPC: Add a label for RPC calls that require allocation on receiveTrond Myklebust1-1/+3
If the RPC call relies on the receive call allocating pages as buffers, then let's label it so that we a) Don't leak memory by allocating pages for requests that do not expect this behaviour b) Can optimise for the common case where calls do not require allocation. Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
2018-06-06vfs: change inode times to use struct timespec64Deepa Dinamani1-2/+6
struct timespec is not y2038 safe. Transition vfs to use y2038 safe struct timespec64 instead. The change was made with the help of the following cocinelle script. This catches about 80% of the changes. All the header file and logic changes are included in the first 5 rules. The rest are trivial substitutions. I avoid changing any of the function signatures or any other filesystem specific data structures to keep the patch simple for review. The script can be a little shorter by combining different cases. But, this version was sufficient for my usecase. virtual patch @ depends on patch @ identifier now; @@ - struct timespec + struct timespec64 current_time ( ... ) { - struct timespec now = current_kernel_time(); + struct timespec64 now = current_kernel_time64(); ... - return timespec_trunc( + return timespec64_trunc( ... ); } @ depends on patch @ identifier xtime; @@ struct \( iattr \| inode \| kstat \) { ... - struct timespec xtime; + struct timespec64 xtime; ... } @ depends on patch @ identifier t; @@ struct inode_operations { ... int (*update_time) (..., - struct timespec t, + struct timespec64 t, ...); ... } @ depends on patch @ identifier t; identifier fn_update_time =~ "update_time$"; @@ fn_update_time (..., - struct timespec *t, + struct timespec64 *t, ...) { ... } @ depends on patch @ identifier t; @@ lease_get_mtime( ... , - struct timespec *t + struct timespec64 *t ) { ... } @te depends on patch forall@ identifier ts; local idexpression struct inode *inode_node; identifier i_xtime =~ "^i_[acm]time$"; identifier ia_xtime =~ "^ia_[acm]time$"; identifier fn_update_time =~ "update_time$"; identifier fn; expression e, E3; local idexpression struct inode *node1; local idexpression struct inode *node2; local idexpression struct iattr *attr1; local idexpression struct iattr *attr2; local idexpression struct iattr attr; identifier i_xtime1 =~ "^i_[acm]time$"; identifier i_xtime2 =~ "^i_[acm]time$"; identifier ia_xtime1 =~ "^ia_[acm]time$"; identifier ia_xtime2 =~ "^ia_[acm]time$"; @@ ( ( - struct timespec ts; + struct timespec64 ts; | - struct timespec ts = current_time(inode_node); + struct timespec64 ts = current_time(inode_node); ) <+... when != ts ( - timespec_equal(&inode_node->i_xtime, &ts) + timespec64_equal(&inode_node->i_xtime, &ts) | - timespec_equal(&ts, &inode_node->i_xtime) + timespec64_equal(&ts, &inode_node->i_xtime) | - timespec_compare(&inode_node->i_xtime, &ts) + timespec64_compare(&inode_node->i_xtime, &ts) | - timespec_compare(&ts, &inode_node->i_xtime) + timespec64_compare(&ts, &inode_node->i_xtime) | ts = current_time(e) | fn_update_time(..., &ts,...) | inode_node->i_xtime = ts | node1->i_xtime = ts | ts = inode_node->i_xtime | <+... attr1->ia_xtime ...+> = ts | ts = attr1->ia_xtime | ts.tv_sec | ts.tv_nsec | btrfs_set_stack_timespec_sec(..., ts.tv_sec) | btrfs_set_stack_timespec_nsec(..., ts.tv_nsec) | - ts = timespec64_to_timespec( + ts = ... -) | - ts = ktime_to_timespec( + ts = ktime_to_timespec64( ...) | - ts = E3 + ts = timespec_to_timespec64(E3) | - ktime_get_real_ts(&ts) + ktime_get_real_ts64(&ts) | fn(..., - ts + timespec64_to_timespec(ts) ,...) ) ...+> ( <... when != ts - return ts; + return timespec64_to_timespec(ts); ...> ) | - timespec_equal(&node1->i_xtime1, &node2->i_xtime2) + timespec64_equal(&node1->i_xtime2, &node2->i_xtime2) | - timespec_equal(&node1->i_xtime1, &attr2->ia_xtime2) + timespec64_equal(&node1->i_xtime2, &attr2->ia_xtime2) | - timespec_compare(&node1->i_xtime1, &node2->i_xtime2) + timespec64_compare(&node1->i_xtime1, &node2->i_xtime2) | node1->i_xtime1 = - timespec_trunc(attr1->ia_xtime1, + timespec64_trunc(attr1->ia_xtime1, ...) | - attr1->ia_xtime1 = timespec_trunc(attr2->ia_xtime2, + attr1->ia_xtime1 = timespec64_trunc(attr2->ia_xtime2, ...) | - ktime_get_real_ts(&attr1->ia_xtime1) + ktime_get_real_ts64(&attr1->ia_xtime1) | - ktime_get_real_ts(&attr.ia_xtime1) + ktime_get_real_ts64(&attr.ia_xtime1) ) @ depends on patch @ struct inode *node; struct iattr *attr; identifier fn; identifier i_xtime =~ "^i_[acm]time$"; identifier ia_xtime =~ "^ia_[acm]time$"; expression e; @@ ( - fn(node->i_xtime); + fn(timespec64_to_timespec(node->i_xtime)); | fn(..., - node->i_xtime); + timespec64_to_timespec(node->i_xtime)); | - e = fn(attr->ia_xtime); + e = fn(timespec64_to_timespec(attr->ia_xtime)); ) @ depends on patch forall @ struct inode *node; struct iattr *attr; identifier i_xtime =~ "^i_[acm]time$"; identifier ia_xtime =~ "^ia_[acm]time$"; identifier fn; @@ { + struct timespec ts; <+... ( + ts = timespec64_to_timespec(node->i_xtime); fn (..., - &node->i_xtime, + &ts, ...); | + ts = timespec64_to_timespec(attr->ia_xtime); fn (..., - &attr->ia_xtime, + &ts, ...); ) ...+> } @ depends on patch forall @ struct inode *node; struct iattr *attr; struct kstat *stat; identifier ia_xtime =~ "^ia_[acm]time$"; identifier i_xtime =~ "^i_[acm]time$"; identifier xtime =~ "^[acm]time$"; identifier fn, ret; @@ { + struct timespec ts; <+... ( + ts = timespec64_to_timespec(node->i_xtime); ret = fn (..., - &node->i_xtime, + &ts, ...); | + ts = timespec64_to_timespec(node->i_xtime); ret = fn (..., - &node->i_xtime); + &ts); | + ts = timespec64_to_timespec(attr->ia_xtime); ret = fn (..., - &attr->ia_xtime, + &ts, ...); | + ts = timespec64_to_timespec(attr->ia_xtime); ret = fn (..., - &attr->ia_xtime); + &ts); | + ts = timespec64_to_timespec(stat->xtime); ret = fn (..., - &stat->xtime); + &ts); ) ...+> } @ depends on patch @ struct inode *node; struct inode *node2; identifier i_xtime1 =~ "^i_[acm]time$"; identifier i_xtime2 =~ "^i_[acm]time$"; identifier i_xtime3 =~ "^i_[acm]time$"; struct iattr *attrp; struct iattr *attrp2; struct iattr attr ; identifier ia_xtime1 =~ "^ia_[acm]time$"; identifier ia_xtime2 =~ "^ia_[acm]time$"; struct kstat *stat; struct kstat stat1; struct timespec64 ts; identifier xtime =~ "^[acmb]time$"; expression e; @@ ( ( node->i_xtime2 \| attrp->ia_xtime2 \| attr.ia_xtime2 \) = node->i_xtime1 ; | node->i_xtime2 = \( node2->i_xtime1 \| timespec64_trunc(...) \); | node->i_xtime2 = node->i_xtime1 = node->i_xtime3 = \(ts \| current_time(...) \); | node->i_xtime1 = node->i_xtime3 = \(ts \| current_time(...) \); | stat->xtime = node2->i_xtime1; | stat1.xtime = node2->i_xtime1; | ( node->i_xtime2 \| attrp->ia_xtime2 \) = attrp->ia_xtime1 ; | ( attrp->ia_xtime1 \| attr.ia_xtime1 \) = attrp2->ia_xtime2; | - e = node->i_xtime1; + e = timespec64_to_timespec( node->i_xtime1 ); | - e = attrp->ia_xtime1; + e = timespec64_to_timespec( attrp->ia_xtime1 ); | node->i_xtime1 = current_time(...); | node->i_xtime2 = node->i_xtime1 = node->i_xtime3 = - e; + timespec_to_timespec64(e); | node->i_xtime1 = node->i_xtime3 = - e; + timespec_to_timespec64(e); | - node->i_xtime1 = e; + node->i_xtime1 = timespec_to_timespec64(e); ) Signed-off-by: Deepa Dinamani <deepa.kernel@gmail.com> Cc: <anton@tuxera.com> Cc: <balbi@kernel.org> Cc: <bfields@fieldses.org> Cc: <darrick.wong@oracle.com> Cc: <dhowells@redhat.com> Cc: <dsterba@suse.com> Cc: <dwmw2@infradead.org> Cc: <hch@lst.de> Cc: <hirofumi@mail.parknet.co.jp> Cc: <hubcap@omnibond.com> Cc: <jack@suse.com> Cc: <jaegeuk@kernel.org> Cc: <jaharkes@cs.cmu.edu> Cc: <jslaby@suse.com> Cc: <keescook@chromium.org> Cc: <mark@fasheh.com> Cc: <miklos@szeredi.hu> Cc: <nico@linaro.org> Cc: <reiserfs-devel@vger.kernel.org> Cc: <richard@nod.at> Cc: <sage@redhat.com> Cc: <sfrench@samba.org> Cc: <swhiteho@redhat.com> Cc: <tj@kernel.org> Cc: <trond.myklebust@primarydata.com> Cc: <tytso@mit.edu> Cc: <viro@zeniv.linux.org.uk>
2018-04-10NFS: advance nfs_entry cookie only after decoding completes successfullyFrank Sorenson1-2/+5
In nfs[34]_decode_dirent, the cookie is advanced as soon as it is read, but decoding may still fail later in the function, returning an error. Because the cookie has been advanced, the failing entry is not re-requested from the server, resulting in a missing directory entry. In addition, nfs v3 and v4 read the cookie at different locations in the xdr_stream, so the behavior of the two can be inconsistent. Fix these by reading the cookie into a temporary variable, and only advancing the cookie once the entire entry has been decoded from the xdr_stream successfully. Signed-off-by: Frank Sorenson <sorenson@redhat.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2017-11-02License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseGreg Kroah-Hartman1-0/+1
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-07-13NFS: convert flags to boolBenjamin Coddington1-1/+1
NFS uses some int, and unsigned int :1, and bool as flags in structs and args. Assert the preference for uniformly replacing these with the bool type. Signed-off-by: Benjamin Coddington <bcodding@redhat.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2017-07-13sunrpc: mark all struct rpc_procinfo instances as constChristoph Hellwig1-2/+2
struct rpc_procinfo contains function pointers, and marking it as constant avoids it being able to be used as an attach vector for code injections. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Trond Myklebust <trond.myklebust@primarydata.com>
2017-07-13nfs: use ARRAY_SIZE() in the nfsacl_version3 declarationChristoph Hellwig1-2/+1
Signed-off-by: Christoph Hellwig <hch@lst.de>
2017-07-13sunrpc: move p_count out of struct rpc_procinfoChristoph Hellwig1-1/+5
p_count is the only writeable memeber of struct rpc_procinfo, which is a good candidate to be const-ified as it contains function pointers. This patch moves it into out out struct rpc_procinfo, and into a separate writable array that is pointed to by struct rpc_version and indexed by p_statidx. Signed-off-by: Christoph Hellwig <hch@lst.de>
2017-07-13nfs: fix decoder callback prototypesChristoph Hellwig1-21/+34
Declare the p_decode callbacks with the proper prototype instead of casting to kxdrdproc_t and losing all type safety. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Jeff Layton <jlayton@redhat.com> Acked-by: Trond Myklebust <trond.myklebust@primarydata.com>
2017-07-13nfs: fix encoder callback prototypesChristoph Hellwig1-23/+60
Declare the p_encode callbacks with the proper prototype instead of casting to kxdreproc_t and losing all type safety. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Jeff Layton <jlayton@redhat.com> Acked-by: Trond Myklebust <trond.myklebust@primarydata.com>
2015-08-05xprtrdma: Fix large NFS SYMLINK callsChuck Lever1-0/+1
Repair how rpcrdma_marshal_req() chooses which RDMA message type to use for large non-WRITE operations so that it picks RDMA_NOMSG in the correct situations, and sets up the marshaling logic to SEND only the RPC/RDMA header. Large NFSv2 SYMLINK requests now use RDMA_NOMSG calls. The Linux NFS server XDR decoder for NFSv2 SYMLINK does not handle having the pathname argument arrive in a separate buffer. The decoder could be fixed, but this is simpler and RDMA_NOMSG can be used in a variety of other situations. Ensure that the Linux client continues to use "RDMA_MSG + read list" when sending large NFSv3 SYMLINK requests, which is more efficient than using RDMA_NOMSG. Large NFSv4 CREATE(NF4LNK) requests are changed to use "RDMA_MSG + read list" just like NFSv3 (see Section 5 of RFC 5667). Before, these did not work at all. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Tested-by: Devesh Sharma <devesh.sharma@avagotech.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2015-06-02NFS: Fix size of NFSACL SETACL operationsChuck Lever1-1/+1
When encoding the NFSACL SETACL operation, reserve just the estimated size of the ACL rather than a fixed maximum. This eliminates needless zero padding on the wire that the server ignores. Fixes: ee5dc7732bd5 ('NFS: Fix "kernel BUG at fs/nfs/nfs3xdr.c:1338!"') Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2015-03-02NFSv3: Use the readdir fileid as the mounted-on-fileidTrond Myklebust1-0/+5
When we call readdirplus, set the fileid normally returned by readdir as the mounted-on-fileid, since that is commonly the case if there is a mountpoint. To ensure that we get it right, we only set the flag if the readdir fileid differs from the one returned in the readdirplus attributes. This again means that we can avoid the issues described in commit 2ef47eb1aee17 ("NFS: Fix use of nfs_attr_use_mounted_on_fileid()"), which only fixed NFSv4. Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2015-02-03nfs: save server READ/WRITE/COMMIT statusPeng Tao1-0/+3
Flexfiles layout would want to use them to report DS IO status. Signed-off-by: Peng Tao <tao.peng@primarydata.com> Signed-off-by: Tom Haynes <Thomas.Haynes@primarydata.com>
2014-05-29NFS: Create a common results structure for reads and writesAnna Schumaker1-4/+4
Reads and writes have very similar results. This patch combines the two structs together with comments to show where the differing fields are used. Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com> Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2014-05-29NFS: Create a common argument structure for reads and writesAnna Schumaker1-4/+4
Reads and writes have very similar arguments. This patch combines them together and documents the few fields used only by write. Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com> Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2013-02-13nfs: Convert nfs3xdr to use kuids and kgidsEric W. Biederman1-4/+14
When reading uids and gids off the wire convert them to kuids and kgids. When putting kuids and kgids onto the wire first convert them to uids and gids the other side will understand. Add an additional failure mode incoming for uids or gids that are invalid. Cc: "J. Bruce Fields" <bfields@fieldses.org> Cc: Trond Myklebust <Trond.Myklebust@netapp.com> Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2012-11-04NFS: Remove asserts from the NFS XDR codeTrond Myklebust1-4/+3
Convert the ones that are not trivial to check into WARN_ON_ONCE(). Remove checks for things such as NFS2_MAXPATHLEN, which are trivially done by the caller. Add a comment to the case of nfs3_xdr_enc_setacl3args. What is being done there is just wrong... Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2012-06-29NFS: Cleanup - only store the write verifier in struct nfs_pageTrond Myklebust1-5/+7
The 'committed' field is not needed once we have put the struct nfs_page on the right list. Also correct the type of the verifier: it is not an array of __be32, but simply an 8 byte long opaque array. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2012-06-29NFSv3: Don't open code stream position calculation in decode_getacl3resokTrond Myklebust1-1/+1
Use the new xdr_stream_pos() helper instead. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2012-06-29NFS: Let xdr_read_pages() check for buffer overflowsTrond Myklebust1-20/+3
xdr_read_pages will already do all of the buffer overflow checks that are currently being open-coded in the various callers. This patch simplifies the existing code by replacing the open coded checks. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2012-06-25NFSv2/v3: Remove incorrect dprintks from the readdir reply codeTrond Myklebust1-8/+2
The actual size of the directory is unknown to the client, so it is always requesting the maximum number it can handle. If the server is replying with fewer entries than was requested, then that will usually reflect the fact that we've hit the end of the directory. Flagging it as an error is therefore incorrect. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2012-05-15NFS: Create an NFS v3 stat_to_errno()Bryan Schumaker1-18/+85
In theory, NFS v3 can have different error versions than NFS v2. v4 is already using its own nfs4_stat_to_errno() to map error codes, so rather than create something in the generic client for v2 and v3 to share I instead give v3 its own function. Signed-off-by: Bryan Schumaker <bjschuma@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2012-05-01NFSv2/v3: Simulate the change attributeTrond Myklebust1-0/+3
Use the ctime to simulate a change attribute for NFSv2 and NFSv3. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2012-04-27NFS: add a struct nfs_commit_data to replace nfs_write_data in commitsFred Isaman1-3/+3
Commits don't need the vectors of pages, etc. that writes do. Split out a separate structure for the commit operation. Signed-off-by: Fred Isaman <iisaman@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2012-02-01SUNRPC: constify the rpc_programTrond Myklebust1-2/+2
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2011-01-25NFS: Fix "kernel BUG at fs/nfs/nfs3xdr.c:1338!"Chuck Lever1-1/+4
Milan Broz <mbroz@redhat.com> reports: > on today Linus' tree I get OOps if using nfs. > > server (2.6.36) exports dir: > /dir 172.16.1.0/24(rw,async,all_squash,no_subtree_check,anonuid=500,anongid=500) > > on client it is mounted in fstab > server:/dir /mnt/tst nfs rw,soft 0 0 > > and these commands OOpses it (simplified from a configure script): > > cd /dir > touch x > install x y > > [ 105.327701] ------------[ cut here ]------------ > [ 105.327979] kernel BUG at fs/nfs/nfs3xdr.c:1338! > [ 105.328075] invalid opcode: 0000 [#1] PREEMPT SMP > [ 105.328223] last sysfs file: /sys/devices/virtual/bdi/0:16/uevent > [ 105.328349] Modules linked in: usbcore dm_mod > [ 105.328553] > [ 105.328678] Pid: 3710, comm: install Not tainted 2.6.37+ #423 440BX Desktop Reference Platform/VMware Virtual Platform > [ 105.328853] EIP: 0060:[<c116c06c>] EFLAGS: 00010282 CPU: 0 > [ 105.329152] EIP is at nfs3_xdr_enc_setacl3args+0x61/0x98 > [ 105.329249] EAX: ffffffea EBX: ce941d98 ECX: 00000000 EDX: 00000004 > [ 105.329340] ESI: ce941cd0 EDI: 000000a4 EBP: ce941cc0 ESP: ce941cb4 > [ 105.329431] DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068 > [ 105.329525] Process install (pid: 3710, ti=ce940000 task=ced36f20 task.ti=ce940000) > [ 105.336600] Stack: > [ 105.336693] ce941cd0 ce9dc000 00000000 ce941cf8 c12ecd02 c12f43e0 c116c00b cf754158 > [ 105.336982] ce9dc004 cf754284 ce9dc004 cf7ffee8 ceff9978 ce9dc000 cf7ffee8 ce9dc000 > [ 105.337182] ce9dc000 ce941d14 c12e698d cf75412c ce941d98 cf7ffee8 cf7fff20 00000000 > [ 105.337405] Call Trace: > [ 105.337695] [<c12ecd02>] rpcauth_wrap_req+0x75/0x7f > [ 105.337806] [<c12f43e0>] ? xdr_encode_opaque+0x12/0x15 > [ 105.337898] [<c116c00b>] ? nfs3_xdr_enc_setacl3args+0x0/0x98 > [ 105.337988] [<c12e698d>] call_transmit+0x17e/0x1e8 > [ 105.338072] [<c12ec307>] __rpc_execute+0x6d/0x1a6 > [ 105.338155] [<c12ec474>] rpc_execute+0x34/0x37 > [ 105.338235] [<c12e738d>] rpc_run_task+0xb5/0xbd > [ 105.338316] [<c12e7474>] rpc_call_sync+0x3d/0x58 > [ 105.338402] [<c116d0c6>] nfs3_proc_setacls+0x18e/0x24f > [ 105.338493] [<c10b3f76>] ? __kmalloc+0x148/0x1c4 > [ 105.338579] [<c10ecd01>] ? posix_acl_alloc+0x12/0x22 > [ 105.338665] [<c116d5c8>] nfs3_proc_setacl+0xa0/0xca > [ 105.338748] [<c116d69c>] nfs3_setxattr+0x62/0x88 > [ 105.338834] [<c1317042>] ? sub_preempt_count+0x7c/0x89 > [ 105.338926] [<c116d63a>] ? nfs3_setxattr+0x0/0x88 > [ 105.339026] [<c10cfa79>] __vfs_setxattr_noperm+0x26/0x95 > [ 105.339114] [<c10cfb43>] vfs_setxattr+0x5b/0x76 > [ 105.339211] [<c10cfbfb>] setxattr+0x9d/0xc3 > [ 105.339298] [<c10a2ea8>] ? handle_pte_fault+0x258/0x5cb > [ 105.339428] [<c1091ff6>] ? __free_pages+0x1a/0x23 > [ 105.339517] [<c10498ea>] ? up_read+0x16/0x2c > [ 105.339599] [<c10b8365>] ? fget+0x0/0xa3 > [ 105.339677] [<c10b8365>] ? fget+0x0/0xa3 > [ 105.339760] [<c1025d23>] ? get_parent_ip+0xb/0x31 > [ 105.339843] [<c1317042>] ? sub_preempt_count+0x7c/0x89 > [ 105.339931] [<c10cfc72>] sys_fsetxattr+0x51/0x79 > [ 105.340014] [<c1002853>] sysenter_do_call+0x12/0x32 > [ 105.340133] Code: 2e 76 18 00 58 31 d2 8b 7f 28 f6 43 04 01 74 03 8b 53 08 6a 00 8b 46 04 6a 01 8b 0b 52 89 fa e8 85 10 f8 ff 83 c4 0c 85 c0 79 04 <0f> 0b eb fe 31 c9 f6 43 04 04 74 03 8b 4b 0c 68 00 10 00 00 8d > [ 105.350321] EIP: [<c116c06c>] nfs3_xdr_enc_setacl3args+0x61/0x98 SS:ESP 0068:ce941cb4 > [ 105.364385] ---[ end trace 01fcfe7f0f7f6e4a ]--- nfs3_xdr_enc_setacl3args() is not properly setting up the target buffer before nfsacl_encode() attempts to encode the ACL. Introduced by commit d9c407b1 "NFS: Introduce new-style XDR encoding functions for NFSv3." Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2011-01-10Merge branch 'bugfixes' into nfs-for-2.6.38Trond Myklebust1-5/+0
Conflicts: fs/nfs/nfs2xdr.c fs/nfs/nfs3xdr.c fs/nfs/nfs4xdr.c
2011-01-10NFS: Don't use vm_map_ram() in readdirTrond Myklebust1-6/+0
vm_map_ram() is not available on NOMMU platforms, and causes trouble on incoherrent architectures such as ARM when we access the page data through both the direct and the virtual mapping. The alternative is to use the direct mapping to access page data for the case when we are not crossing a page boundary, but to copy the data into a linear scratch buffer when we are accessing data that spans page boundaries. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com> Tested-by: Marc Kleine-Budde <mkl@pengutronix.de> Cc: stable@kernel.org [2.6.37]
2010-12-16SUNRPC: New xdr_streams XDR decoder APIChuck Lever1-108/+87
Now that all client-side XDR decoder routines use xdr_streams, there should be no need to support the legacy calling sequence [rpc_rqst *, __be32 *, RPC res *] anywhere. We can construct an xdr_stream in the generic RPC code, instead of in each decoder function. This is a refactoring change. It should not cause different behavior. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Tested-by: J. Bruce Fields <bfields@redhat.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>