Age | Commit message (Collapse) | Author | Files | Lines |
|
Record when a client presents a different boot verifier than the
one we know about. Typically this is a sign the client has
rebooted, but sometimes it signals a conflicting client ID, which
the client's administrator will need to address.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
|
|
Record when a client tries to establish a lease record but uses an
unexpected credential. This is often a sign of a configuration
problem.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
|
|
To be used in subsequent patches.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
|
|
Since commit 9a6944fee68e ("tracing: Add a verifier to check string
pointers for trace events"), which was merged in v5.13-rc1,
TP_printk() no longer tacitly supports the "%.*s" format specifier.
These are low value tracepoints, so just remove them.
Reported-by: David Wysochanski <dwysocha@redhat.com>
Fixes: dd5e3fbc1f47 ("NFSD: Add tracepoints to the NFSD state management code")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
|
|
Enable watching the progress of directory encoding to capture the
timing of any issues with reading or encoding a directory. The
new tracepoint captures dirent encoding for all NFS versions.
For example, here's what a few NFSv4 directory entries might look
like:
nfsd-989 [002] 468.596265: nfsd_dirent: fh_hash=0x5d162594 ino=2 name=.
nfsd-989 [002] 468.596267: nfsd_dirent: fh_hash=0x5d162594 ino=1 name=..
nfsd-989 [002] 468.596299: nfsd_dirent: fh_hash=0x5d162594 ino=3827 name=zlib.c
nfsd-989 [002] 468.596325: nfsd_dirent: fh_hash=0x5d162594 ino=3811 name=xdiff
nfsd-989 [002] 468.596351: nfsd_dirent: fh_hash=0x5d162594 ino=3810 name=xdiff-interface.h
nfsd-989 [002] 468.596377: nfsd_dirent: fh_hash=0x5d162594 ino=3809 name=xdiff-interface.c
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
For troubleshooting purposes, record failures to decode NFSv4
operation arguments and encode operation results.
trace_nfsd_compound_decode_err() replaces the dprintk() call sites
that are embedded in READ_* macros that are about to be removed.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
For troubleshooting purposes, record GARBAGE_ARGS and CANT_ENCODE
failures.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Clean up: %p adds its own 0x already.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Display all currently possible NFSD_MAY permission flags.
Move and rename show_nf_may with a more generic name because the
NFSD_MAY permission flags are used in other places besides the file
cache.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Now when a read delegation is given, two delegation related traces
will be printed:
nfsd_deleg_open: client 5f45b854:e6058001 stateid 00000030:00000001
nfsd_deleg_none: client 5f45b854:e6058001 stateid 0000002f:00000001
Although the intention is to let developers know two stateid are
returned, the traces are confusing about whether or not a read delegation
is handled out. So renaming trace_nfsd_deleg_none() to trace_nfsd_open()
and trace_nfsd_deleg_open() to trace_nfsd_deleg_read() to make
the intension clearer.
The patched traces will be:
nfsd_deleg_read: client 5f48a967:b55b21cd stateid 00000003:00000001
nfsd_open: client 5f48a967:b55b21cd stateid 00000002:00000001
Suggested-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Hou Tao <houtao1@huawei.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
|
|
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Capture obvious events and replace dprintk() call sites. Introduce
infrastructure so that adding more tracepoints in this code later
is simplified.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Try to capture DRC failures.
Two additional clean-ups:
- Introduce Doxygen-style comments for the main entry points
- Remove a dprintk that fires for an allocation failure. This was
the only dprintk in the REPCACHE class.
Reported-by: kbuild test robot <lkp@intel.com>
[ cel: force typecast for display of checksum values ]
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Add tracepoints for upcalls.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Add tracing to allow us to figure out where any stale filehandle issues
may be originating from.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Use the 'refcount_t' type instead of 'atomic_t' for improved
refcounting safety.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
|
|
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
|
|
perf does not know how to deal with a __builtin_bswap32() call, and
complains. All other functions just store the xid etc in host endian
form, so let's do that in the tracepoint for nfsd_file_acquire too.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
|
|
Currently, NFSv2/3 reads and writes have to open a file, do the read or
write and then close it again for each RPC. This is highly inefficient,
especially when the underlying filesystem has a relatively slow open
routine.
This patch adds a new open file cache to knfsd. Rather than doing an
open for each RPC, the read/write handlers can call into this cache to
see if there is one already there for the correct filehandle and
NFS_MAY_READ/WRITE flags.
If there isn't an entry, then we create a new one and attempt to
perform the open. If there is, then we wait until the entry is fully
instantiated and return it if it is at the end of the wait. If it's
not, then we attempt to take over construction.
Since the main goal is to speed up NFSv2/3 I/O, we don't want to
close these files on last put of these objects. We need to keep them
around for a little while since we never know when the next READ/WRITE
will come in.
Cache entries have a hardcoded 1s timeout, and we have a recurring
workqueue job that walks the cache and purges any entries that have
expired.
Signed-off-by: Jeff Layton <jeff.layton@primarydata.com>
Signed-off-by: Weston Andros Adamson <dros@primarydata.com>
Signed-off-by: Richard Sharpe <richard.sharpe@primarydata.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
|
|
This helps record the identity and timing of the ops in each NFSv4
COMPOUND, replacing dprintk calls that did much the same thing.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
|
|
NFSv4 read compound processing invokes nfsd_splice_read and
nfs_readv directly, so the trace points currently in nfsd_read are
not invoked for NFSv4 reads.
Move the NFSD READ trace points to common helpers so that NFSv4
reads are captured.
Also, record any local I/O error that occurs, the total count of
bytes that were actually returned, and whether splice or vectored
read was used.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
|
|
NFSv4 write compound processing invokes nfsd_vfs_write directly. The
trace points currently in nfsd_write are not effective for NFSv4
writes.
Move the trace points into the shared nfsd_vfs_write() helper.
After the I/O, we also want to record any local I/O error that
might have occurred, and the total count of bytes that were actually
moved (rather than the requested number).
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
|
|
Follow naming convention used in client and in sunrpc layers.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
|
|
Byte count is more helpful to know than vector count.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
|
|
nfsd-1915 [003] 77915.780959: write_opened:
[FAILED TO PARSE] xid=3286130958 fh=0 offset=154624 len=1
nfsd-1915 [003] 77915.780960: write_io_done:
[FAILED TO PARSE] xid=3286130958 fh=0 offset=154624 len=1
nfsd-1915 [003] 77915.780964: write_done:
[FAILED TO PARSE] xid=3286130958 fh=0 offset=154624 len=1
Byte swapping and knfsd_fh_hash() are not available in "trace-cmd
report", where the print format string is actually used. These
data transformations have to be done during the TP_fast_assign step.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
|
|
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.
By default all files without license information are under the default
license of the kernel, which is GPL version 2.
Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier. The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.
This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.
How this work was done:
Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
- file had no licensing information it it.
- file was a */uapi/* one with no licensing information in it,
- file was a */uapi/* one with existing licensing information,
Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.
The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne. Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.
The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed. Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.
Criteria used to select files for SPDX license identifier tagging was:
- Files considered eligible had to be source code files.
- Make and config files were included as candidates if they contained >5
lines of source
- File already had some variant of a license header in it (even if <5
lines).
All documentation files were explicitly excluded.
The following heuristics were used to determine which SPDX license
identifiers to apply.
- when both scanners couldn't find any license traces, file was
considered to have no license information in it, and the top level
COPYING file license applied.
For non */uapi/* files that summary was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 11139
and resulted in the first patch in this series.
If that file was a */uapi/* path one, it was "GPL-2.0 WITH
Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 WITH Linux-syscall-note 930
and resulted in the second patch in this series.
- if a file had some form of licensing information in it, and was one
of the */uapi/* ones, it was denoted with the Linux-syscall-note if
any GPL family license was found in the file or had no licensing in
it (per prior point). Results summary:
SPDX license identifier # files
---------------------------------------------------|------
GPL-2.0 WITH Linux-syscall-note 270
GPL-2.0+ WITH Linux-syscall-note 169
((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21
((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17
LGPL-2.1+ WITH Linux-syscall-note 15
GPL-1.0+ WITH Linux-syscall-note 14
((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5
LGPL-2.0+ WITH Linux-syscall-note 4
LGPL-2.1 WITH Linux-syscall-note 3
((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3
((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1
and that resulted in the third patch in this series.
- when the two scanners agreed on the detected license(s), that became
the concluded license(s).
- when there was disagreement between the two scanners (one detected a
license but the other didn't, or they both detected different
licenses) a manual inspection of the file occurred.
- In most cases a manual inspection of the information in the file
resulted in a clear resolution of the license that should apply (and
which scanner probably needed to revisit its heuristics).
- When it was not immediately clear, the license identifier was
confirmed with lawyers working with the Linux Foundation.
- If there was any question as to the appropriate license identifier,
the file was flagged for further research and to be revisited later
in time.
In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.
Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights. The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.
Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.
In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.
Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
- a full scancode scan run, collecting the matched texts, detected
license ids and scores
- reviewing anything where there was a license detected (about 500+
files) to ensure that the applied SPDX license was correct
- reviewing anything where there was no detection but the patch license
was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
SPDX license was correct
This produced a worksheet with 20 files needing minor correction. This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.
These .csv files were then reviewed by Greg. Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected. This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.) Finally Greg ran the script using the .csv files to
generate the patches.
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Add some new tracepoints in the nfsd read/write codepaths. The idea
is that this will give us the ability to measure how long each phase of
a read or write operation takes.
Signed-off-by: Jeff Layton <jeff.layton@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
|
|
Any file which includes trace.h will need to include state.h, even if
they aren't using any state tracepoints. Ensure that we include any
headers that might be needed in trace.h instead of relying on the
*.c files to have the right ones.
Signed-off-by: Jeff Layton <jeff.layton@primarydata.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
|
|
For now just a few simple events to trace the layout stateid lifetime, but
these already were enough to find several bugs in the Linux client layout
stateid handling.
Signed-off-by: Christoph Hellwig <hch@lst.de>
|