summaryrefslogtreecommitdiff
path: root/fs/proc/Makefile
AgeCommit message (Collapse)AuthorFilesLines
2020-01-13proc: bootconfig: Add /proc/bootconfig to show boot config listMasami Hiramatsu1-0/+1
Add /proc/bootconfig which shows the list of key-value pairs in boot config. Since after boot, all boot configs and tree are removed, this interface just keep a copy of key-value pairs in text. Link: http://lkml.kernel.org/r/157867225967.17873.12155805787236073787.stgit@devnote2 Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2017-11-18proc: : uninline name_to_int()Alexey Dobriyan1-0/+1
Save ~360 bytes. add/remove: 1/0 grow/shrink: 0/4 up/down: 104/-463 (-359) function old new delta name_to_int - 104 +104 proc_pid_lookup 217 126 -91 proc_lookupfd_common 212 121 -91 proc_task_lookup 289 194 -95 __proc_create 588 402 -186 Link: http://lkml.kernel.org/r/20170912194850.GA17730@avx2 Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-11-02License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseGreg Kroah-Hartman1-0/+1
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-08-03fs/proc: Add compiler check for -Wno-override-init to support gcc < 4.2Geert Uytterhoeven1-1/+1
With gcc < 4.2 (e.g. 4.1.2): CC fs/proc/task_mmu.o cc1: error: unrecognized command line option "-Wno-override-init" To fix this, only enable the compiler option when it is actually supported by the compiler. Fixes: ca52953f5f24 ("fs/proc/task_mmu.c: suppress compilation warnings with W=1") Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Valdis Kletnieks <valdis.kletnieks@vt.edu> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-08-03fs/proc/task_mmu.c: suppress compilation warnings with W=1Valdis Kletnieks1-0/+1
Suppress a bunch of warnings of the form: fs/proc/task_mmu.c: In function 'show_smap_vma_flags': fs/proc/task_mmu.c:635:22: warning: initialized field overwritten [-Wt override-init] [ilog2(VM_READ)] = "rd", ^~~~ fs/proc/task_mmu.c:635:22: note: (near initialization for 'mnemonics[0]') They happen because of the way we intentionally build the table, so silence the warning when building with 'make W=1'. Link: http://lkml.kernel.org/r/8727.1470022083@turing-police.cc.vt.edu Signed-off-by: Valdis Kletnieks <valdis.kletnieks@vt.edu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-08-04proc: Implement /proc/thread-self to point at the directory of the current ↵Eric W. Biederman1-0/+1
thread /proc/thread-self is derived from /proc/self. /proc/thread-self points to the directory in proc containing information about the current thread. This funtionality has been missing for a long time, and is tricky to implement in userspace as gettid() is not exported by glibc. More importantly this allows fixing defects in /proc/mounts and /proc/net where in a threaded application today they wind up being empty files when only the initial pthread has exited, causing problems for other threads. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2014-03-12of: remove /proc/device-treeGrant Likely1-1/+0
The same data is now available in sysfs, so we can remove the code that exports it in /proc and replace it with a symlink to the sysfs version. Tested on versatile qemu model and mpc5200 eval board. More testing would be appreciated. v5: Fixed up conflicts with mainline changes Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Cc: Rob Herring <rob.herring@calxeda.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: David S. Miller <davem@davemloft.net> Cc: Nathan Fontenot <nfont@linux.vnet.ibm.com> Cc: Pantelis Antoniou <panto@antoniou-consulting.com>
2013-04-30mm, vmalloc: move get_vmalloc_info() to vmalloc.cJoonsoo Kim1-1/+1
Now get_vmalloc_info() is in fs/proc/mmu.c. There is no reason that this code must be here and it's implementation needs vmlist_lock and it iterate a vmlist which may be internal data structure for vmalloc. It is preferable that vmlist_lock and vmlist is only used in vmalloc.c for maintainability. So move the code to vmalloc.c Signed-off-by: Joonsoo Kim <js1304@gmail.com> Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Atsushi Kumagai <kumagai-atsushi@mxc.nes.nec.co.jp> Cc: Chris Metcalf <cmetcalf@tilera.com> Cc: Dave Anderson <anderson@redhat.com> Cc: Eric Biederman <ebiederm@xmission.com> Cc: Guan Xuetao <gxt@mprc.pku.edu.cn> Cc: Ingo Molnar <mingo@kernel.org> Cc: Vivek Goyal <vgoyal@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-01-19tty: Added a CONFIG_TTY option to allow removal of TTYJoe Millenbach1-1/+2
The option allows you to remove TTY and compile without errors. This saves space on systems that won't support TTY interfaces anyway. bloat-o-meter output is below. The bulk of this patch consists of Kconfig changes adding "depends on TTY" to various serial devices and similar drivers that require the TTY layer. Ideally, these dependencies would occur on a common intermediate symbol such as SERIO, but most drivers "select SERIO" rather than "depends on SERIO", and "select" does not respect dependencies. bloat-o-meter output comparing our previous minimal to new minimal by removing TTY. The list is filtered to not show removed entries with awk '$3 != "-"' as the list was very long. add/remove: 0/226 grow/shrink: 2/14 up/down: 6/-35356 (-35350) function old new delta chr_dev_init 166 170 +4 allow_signal 80 82 +2 static.__warned 143 142 -1 disallow_signal 63 62 -1 __set_special_pids 95 94 -1 unregister_console 126 121 -5 start_kernel 546 541 -5 register_console 593 588 -5 copy_from_user 45 40 -5 sys_setsid 128 120 -8 sys_vhangup 32 19 -13 do_exit 1543 1526 -17 bitmap_zero 60 40 -20 arch_local_irq_save 137 117 -20 release_task 674 652 -22 static.spin_unlock_irqrestore 308 260 -48 Signed-off-by: Joe Millenbach <jmillenbach@gmail.com> Reviewed-by: Jamey Sharp <jamey@minilop.net> Reviewed-by: Josh Triplett <josh@joshtriplett.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-19procfs: Use the proc generic infrastructure for proc/self.Eric W. Biederman1-0/+1
I had visions at one point of splitting proc into two filesystems. If that had happened proc/self being the the part of proc that actually deals with pids would have been a nice cleanup. As it is proc/self requires a lot of unnecessary infrastructure for a single file. The only user visible change is that a mounted /proc for a pid namespace that is dead now shows a broken proc symlink, instead of being completely invisible. I don't think anyone will notice or care. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
2012-09-27procfs: Move /proc/pid/fd[info] handling code to fd.[ch]Cyrill Gorcunov1-1/+1
This patch prepares the ground for further extension of /proc/pid/fd[info] handling code by moving fdinfo handling code into fs/proc/fd.c. I think such move makes both fs/proc/base.c and fs/proc/fd.c easier to read. Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org> Acked-by: Pavel Emelyanov <xemul@parallels.com> CC: Al Viro <viro@ZenIV.linux.org.uk> CC: Alexey Dobriyan <adobriyan@gmail.com> CC: Andrew Morton <akpm@linux-foundation.org> CC: James Bottomley <jbottomley@parallels.com> CC: "Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com> CC: Alexey Dobriyan <adobriyan@gmail.com> CC: Matthew Helsley <matt.helsley@gmail.com> CC: "J. Bruce Fields" <bfields@fieldses.org> CC: "Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2011-05-11ns: proc files for namespace naming policy.Eric W. Biederman1-0/+1
Create files under /proc/<pid>/ns/ to allow controlling the namespaces of a process. This addresses three specific problems that can make namespaces hard to work with. - Namespaces require a dedicated process to pin them in memory. - It is not possible to use a namespace unless you are the child of the original creator. - Namespaces don't have names that userspace can use to talk about them. The namespace files under /proc/<pid>/ns/ can be opened and the file descriptor can be used to talk about a specific namespace, and to keep the specified namespace alive. A namespace can be kept alive by either holding the file descriptor open or bind mounting the file someplace else. aka: mount --bind /proc/self/ns/net /some/filesystem/path mount --bind /proc/self/fd/<N> /some/filesystem/path This allows namespaces to be named with userspace policy. It requires additional support to make use of these filedescriptors and that will be comming in the following patches. Acked-by: Daniel Lezcano <daniel.lezcano@free.fr> Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
2011-01-13proc: move proc_console.c to fs/proc/consoles.cAlexey Dobriyan1-1/+1
Filename is supposed to match procfile name for random junk. Add __init while I'm at it. Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-11-16console: add /proc/consolesJiri Slaby1-0/+1
It allows users to see what consoles are currently known to the system and with what flags. It is based on Werner's patch, the part about traversing fds was removed, the code was moved to kernel/printk.c, where consoles are handled and it makes more sense to me. Signed-off-by: Jiri Slaby <jslaby@suse.cz> [cleanups] Signed-off-by: "Dr. Werner Fink" <werner@suse.de> Cc: Al Viro <viro@ZenIV.linux.org.uk> Cc: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-08-11procfs: simplify conditional processing of fs/proc.o.Robert P. J. Day1-1/+1
Since the entire fs/proc directory is conditionally included based on CONFIG_PROC_FS, it's redundant to check that same variable within that directory. Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-19proc: export statistics for softirq to /procKeika Kobayashi1-0/+1
Export statistics for softirq in /proc/softirqs and /proc/stat. 1. /proc/softirqs Implement /proc/softirqs which shows the number of softirq for each CPU like /proc/interrupts. 2. /proc/stat Add the "softirq" line to /proc/stat. This line shows the number of softirq for all cpu. The first column is the total of all softirqs and each subsequent column is the total for particular softirq. [kosaki.motohiro@jp.fujitsu.com: remove redundant for_each_possible_cpu() loop] Signed-off-by: Keika Kobayashi <kobayashi.kk@ncos.nec.co.jp> Reviewed-by: Hiroshi Shimamoto <h-shimamoto@ct.jp.nec.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Eric Dumazet <dada1@cosmosbay.com> Cc: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-23proc: remove fs/proc/proc_misc.cAlexey Dobriyan1-1/+1
Now that everything was moved to their more or less expected places, apply rm(1). Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
2008-10-23proc: move pagecount stuff to fs/proc/page.cAlexey Dobriyan1-0/+1
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
2008-10-23proc: move /proc/interrupts boilerplate code to fs/proc/interrupts.cAlexey Dobriyan1-0/+1
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
2008-10-23proc: move /proc/stat to fs/proc/stat.cAlexey Dobriyan1-0/+1
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
2008-10-23proc: move /proc/cpuinfo code to fs/proc/cpuinfo.cAlexey Dobriyan1-0/+1
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
2008-10-23proc: move /proc/devices code to fs/proc/devices.cAlexey Dobriyan1-0/+1
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
2008-10-23proc: switch /proc/cmdline to seq_fileAlexey Dobriyan1-0/+1
and move it to fs/proc/cmdline.c while I'm at it. Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
2008-10-23proc: switch /proc/version to seq_fileAlexey Dobriyan1-0/+1
and move it to fs/proc/version.c while I'm at it. Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
2008-10-23proc: switch /proc/meminfo to seq_fileAlexey Dobriyan1-0/+1
and move it to fs/proc/meminfo.c while I'm at it. Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
2008-10-23proc: switch /proc/uptime to seq_fileAlexey Dobriyan1-0/+1
and move it to fs/proc/uptime.c while I'm at it. Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
2008-10-23proc: switch /proc/loadavg to seq_fileAlexey Dobriyan1-1/+1
and move it to fs/proc/loadavg.c while I'm at it. Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
2007-10-11[NET]: Make /proc/net per network namespaceEric W. Biederman1-0/+1
This patch makes /proc/net per network namespace. It modifies the global variables proc_net and proc_net_stat to be per network namespace. The proc_net file helpers are modified to take a network namespace argument, and all of their callers are fixed to pass &init_net for that argument. This ensures that all of the /proc/net files are only visible and usable in the initial network namespace until the code behind them has been updated to be handle multiple network namespaces. Making /proc/net per namespace is necessary as at least some files in /proc/net depend upon the set of network devices which is per network namespace, and even more files in /proc/net have contents that are relevant to a single network namespace. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-03-27[PATCH] Fix kernel build with EMBEDDED & PROC_FS & !PROC_SYSCTLMika Kukkonen1-1/+2
Without attached patch against current -git I get following with !PROC_SYSCTL (with EMBEDDED and PROC_FS set): CC init/version.o LD init/built-in.o LD vmlinux fs/built-in.o: In function `do_proc_sys_lookup': proc_sysctl.c:(.text+0x26583): undefined reference to `sysctl_head_next' fs/built-in.o: In function `proc_sys_revalidate': proc_sysctl.c:(.text+0x265bb): undefined reference to `sysctl_head_finish' fs/built-in.o: In function `proc_sys_readdir': proc_sysctl.c:(.text+0x26720): undefined reference to `sysctl_head_next' proc_sysctl.c:(.text+0x267d8): undefined reference to `sysctl_head_finish' proc_sysctl.c:(.text+0x268e7): undefined reference to `sysctl_head_next' proc_sysctl.c:(.text+0x26910): undefined reference to `sysctl_head_finish' fs/built-in.o: In function `proc_sys_write': proc_sysctl.c:(.text+0x2695d): undefined reference to `sysctl_perm' proc_sysctl.c:(.text+0x2699c): undefined reference to `sysctl_head_finish' fs/built-in.o: In function `proc_sys_read': proc_sysctl.c:(.text+0x269e9): undefined reference to `sysctl_perm' proc_sysctl.c:(.text+0x26a25): undefined reference to `sysctl_head_finish' fs/built-in.o: In function `proc_sys_permission': proc_sysctl.c:(.text+0x26ad1): undefined reference to `sysctl_perm' proc_sysctl.c:(.text+0x26adb): undefined reference to `sysctl_head_finish' fs/built-in.o: In function `proc_sys_lookup': proc_sysctl.c:(.text+0x26b39): undefined reference to `sysctl_head_finish' make: *** [vmlinux] Virhe 1 All those functions are in fs/proc/proc_sysctl.c, which has no CONFIG_ #define's in it, so the patch makes the compilation of that file to depend on CONFIG_PROC_SYSCTL (the simplest choice). Acked-by: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-14[PATCH] sysctl: reimplement the sysctl proc supportEric W. Biederman1-1/+1
With this change the sysctl inodes can be cached and nothing needs to be done when removing a sysctl table. For a cost of 2K code we will save about 4K of static tables (when we remove de from ctl_table) and 70K in proc_dir_entries that we will not allocate, or about half that on a 32bit arch. The speed feels about the same, even though we can now cache the sysctl dentries :( We get the core advantage that we don't need to have a 1 to 1 mapping between ctl table entries and proc files. Making it possible to have /proc/sys vary depending on the namespace you are in. The currently merged namespaces don't have an issue here but the network namespace under /proc/sys/net needs to have different directories depending on which network adapters are visible. By simply being a cache different directories being visible depending on who you are is trivial to implement. [akpm@osdl.org: fix uninitialised var] [akpm@osdl.org: fix ARM build] [bunk@stusta.de: make things static] Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Cc: Russell King <rmk@arm.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2006-12-07[PATCH] remove the syslog interface when printk is disabledMike Galbraith1-1/+2
Attempts to read() from the non-existent dmesg buffer will return zero and userspace tends to get stuck in a busyloop. So just remove /dev/kmsg altogether if CONFIG_PRINTK=n. Signed-off-by: Mike Galbraith <efault@gmx.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-26[PATCH] kdump: Access dump file in elf format (/proc/vmcore)Vivek Goyal1-0/+1
From: "Vivek Goyal" <vgoyal@in.ibm.com> o Support for /proc/vmcore interface. This interface exports elf core image either in ELF32 or ELF64 format, depending on the format in which elf headers have been stored by crashed kernel. o Added support for CONFIG_VMCORE config option. o Removed the dependency on /proc/kcore. From: "Eric W. Biederman" <ebiederm@xmission.com> This patch has been refactored to more closely match the prevailing style in the affected files. And to clearly indicate the dependency between /proc/kcore and proc/vmcore.c From: Hariprasad Nellitheertha <hari@in.ibm.com> This patch contains the code that provides an ELF format interface to the previous kernel's memory post kexec reboot. Signed off by Hariprasad Nellitheertha <hari@in.ibm.com> Signed-off-by: Eric Biederman <ebiederm@xmission.com> Signed-off-by: Vivek Goyal <vgoyal@in.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-04-17Linux-2.6.12-rc2Linus Torvalds1-0/+14
Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!