summaryrefslogtreecommitdiff
path: root/fs/select.c
AgeCommit message (Collapse)AuthorFilesLines
2019-07-17fs/select.c: use struct_size() in kmalloc()Gustavo A. R. Silva1-3/+3
One of the more common cases of allocation size calculations is finding the size of a structure that has a zero-sized array at the end, along with memory for some number of elements for that array. For example: struct foo { int stuff; struct boo entry[]; }; size = sizeof(struct foo) + count * sizeof(struct boo); instance = kmalloc(size, GFP_KERNEL); Instead of leaving these open-coded and prone to type mistakes, we can now use the new struct_size() helper: instance = kmalloc(struct_size(instance, entry, count), GFP_KERNEL); Also, notice that variable size is unnecessary, hence it is removed. This code was detected with the help of Coccinelle. Link: http://lkml.kernel.org/r/20190604164226.GA13823@embeddedor Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-07-17select: shift restore_saved_sigmask_unless() into poll_select_copy_remaining()Oleg Nesterov1-33/+13
Now that restore_saved_sigmask_unless() is always called with the same argument right before poll_select_copy_remaining() we can move it into poll_select_copy_remaining() and make it the only caller of restore() in fs/select.c. The patch also renames poll_select_copy_remaining(), poll_select_finish() looks better after this change. kern_select() doesn't use set_user_sigmask(), so in this case poll_select_finish() does restore_saved_sigmask_unless() "for no reason". But this won't hurt, and WARN_ON(!TIF_SIGPENDING) is still valid. Link: http://lkml.kernel.org/r/20190606140915.GC13440@redhat.com Signed-off-by: Oleg Nesterov <oleg@redhat.com> Cc: Al Viro <viro@ZenIV.linux.org.uk> Cc: Arnd Bergmann <arnd@arndb.de> Cc: David Laight <David.Laight@aculab.com> Cc: Davidlohr Bueso <dave@stgolabs.net> Cc: Deepa Dinamani <deepa.kernel@gmail.com> Cc: Eric W. Biederman <ebiederm@xmission.com> Cc: Eric Wong <e@80x24.org> Cc: Jason Baron <jbaron@akamai.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-07-17select: change do_poll() to return -ERESTARTNOHAND rather than -EINTROleg Nesterov1-23/+7
do_poll() returns -EINTR if interrupted and after that all its callers have to translate it into -ERESTARTNOHAND. Change do_poll() to return -ERESTARTNOHAND and update (simplify) the callers. Note that this also unifies all users of restore_saved_sigmask_unless(), see the next patch. Linus: : The *right* return value will actually be then chosen by : poll_select_copy_remaining(), which will turn ERESTARTNOHAND to EINTR : when it can't update the timeout. : : Except for the cases that use restart_block and do that instead and : don't have the whole timeout restart issue as a result. Link: http://lkml.kernel.org/r/20190606140852.GB13440@redhat.com Signed-off-by: Oleg Nesterov <oleg@redhat.com> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: Al Viro <viro@ZenIV.linux.org.uk> Cc: Arnd Bergmann <arnd@arndb.de> Cc: David Laight <David.Laight@aculab.com> Cc: Davidlohr Bueso <dave@stgolabs.net> Cc: Deepa Dinamani <deepa.kernel@gmail.com> Cc: Eric W. Biederman <ebiederm@xmission.com> Cc: Eric Wong <e@80x24.org> Cc: Jason Baron <jbaron@akamai.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-07-17signal: simplify set_user_sigmask/restore_user_sigmaskOleg Nesterov1-22/+12
task->saved_sigmask and ->restore_sigmask are only used in the ret-from- syscall paths. This means that set_user_sigmask() can save ->blocked in ->saved_sigmask and do set_restore_sigmask() to indicate that ->blocked was modified. This way the callers do not need 2 sigset_t's passed to set/restore and restore_user_sigmask() renamed to restore_saved_sigmask_unless() turns into the trivial helper which just calls restore_saved_sigmask(). Link: http://lkml.kernel.org/r/20190606113206.GA9464@redhat.com Signed-off-by: Oleg Nesterov <oleg@redhat.com> Cc: Deepa Dinamani <deepa.kernel@gmail.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Jens Axboe <axboe@kernel.dk> Cc: Davidlohr Bueso <dave@stgolabs.net> Cc: Eric Wong <e@80x24.org> Cc: Jason Baron <jbaron@akamai.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Al Viro <viro@ZenIV.linux.org.uk> Cc: Eric W. Biederman <ebiederm@xmission.com> Cc: David Laight <David.Laight@aculab.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-06-29signal: remove the wrong signal_pending() check in restore_user_sigmask()Oleg Nesterov1-12/+6
This is the minimal fix for stable, I'll send cleanups later. Commit 854a6ed56839 ("signal: Add restore_user_sigmask()") introduced the visible change which breaks user-space: a signal temporary unblocked by set_user_sigmask() can be delivered even if the caller returns success or timeout. Change restore_user_sigmask() to accept the additional "interrupted" argument which should be used instead of signal_pending() check, and update the callers. Eric said: : For clarity. I don't think this is required by posix, or fundamentally to : remove the races in select. It is what linux has always done and we have : applications who care so I agree this fix is needed. : : Further in any case where the semantic change that this patch rolls back : (aka where allowing a signal to be delivered and the select like call to : complete) would be advantage we can do as well if not better by using : signalfd. : : Michael is there any chance we can get this guarantee of the linux : implementation of pselect and friends clearly documented. The guarantee : that if the system call completes successfully we are guaranteed that no : signal that is unblocked by using sigmask will be delivered? Link: http://lkml.kernel.org/r/20190604134117.GA29963@redhat.com Fixes: 854a6ed56839a40f6b5d02a2962f48841482eec4 ("signal: Add restore_user_sigmask()") Signed-off-by: Oleg Nesterov <oleg@redhat.com> Reported-by: Eric Wong <e@80x24.org> Tested-by: Eric Wong <e@80x24.org> Acked-by: "Eric W. Biederman" <ebiederm@xmission.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Deepa Dinamani <deepa.kernel@gmail.com> Cc: Michael Kerrisk <mtk.manpages@gmail.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Davidlohr Bueso <dave@stgolabs.net> Cc: Jason Baron <jbaron@akamai.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Al Viro <viro@ZenIV.linux.org.uk> Cc: David Laight <David.Laight@ACULAB.COM> Cc: <stable@vger.kernel.org> [5.0+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-02-07y2038: syscalls: rename y2038 compat syscallsArnd Bergmann1-2/+2
A lot of system calls that pass a time_t somewhere have an implementation using a COMPAT_SYSCALL_DEFINEx() on 64-bit architectures, and have been reworked so that this implementation can now be used on 32-bit architectures as well. The missing step is to redefine them using the regular SYSCALL_DEFINEx() to get them out of the compat namespace and make it possible to build them on 32-bit architectures. Any system call that ends in 'time' gets a '32' suffix on its name for that version, while the others get a '_time32' suffix, to distinguish them from the normal version, which takes a 64-bit time argument in the future. In this step, only 64-bit architectures are changed, doing this rename first lets us avoid touching the 32-bit architectures twice. Acked-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2019-01-04Remove 'type' argument from access_ok() functionLinus Torvalds1-7/+4
Nobody has actually used the type (VERIFY_READ vs VERIFY_WRITE) argument of the user address range verification function since we got rid of the old racy i386-only code to walk page tables by hand. It existed because the original 80386 would not honor the write protect bit when in kernel mode, so you had to do COW by hand before doing any user access. But we haven't supported that in a long time, and these days the 'type' argument is a purely historical artifact. A discussion about extending 'user_access_begin()' to do the range checking resulted this patch, because there is no way we're going to move the old VERIFY_xyz interface to that model. And it's best done at the end of the merge window when I've done most of my merges, so let's just get this done once and for all. This patch was mostly done with a sed-script, with manual fix-ups for the cases that weren't of the trivial 'access_ok(VERIFY_xyz' form. There were a couple of notable cases: - csky still had the old "verify_area()" name as an alias. - the iter_iov code had magical hardcoded knowledge of the actual values of VERIFY_{READ,WRITE} (not that they mattered, since nothing really used it) - microblaze used the type argument for a debug printout but other than those oddities this should be a total no-op patch. I tried to fix up all architectures, did fairly extensive grepping for access_ok() uses, and the changes are trivial, but I may have missed something. Any missed conversion should be trivially fixable, though. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-12-06pselect6: use __kernel_timespecDeepa Dinamani1-13/+81
struct timespec is not y2038 safe. struct __kernel_timespec is the new y2038 safe structure for all syscalls that are using struct timespec. Update pselect interfaces to use struct __kernel_timespec. sigset_t also has different representations on 32 bit and 64 bit architectures. Hence, we need to support the following different syscalls: New y2038 safe syscalls: (Controlled by CONFIG_64BIT_TIME for 32 bit ABIs) Native 64 bit(unchanged) and native 32 bit : sys_pselect6 Compat : compat_sys_pselect6_time64 Older y2038 unsafe syscalls: (Controlled by CONFIG_32BIT_COMPAT_TIME for 32 bit ABIs) Native 32 bit : pselect6_time32 Compat : compat_sys_pselect6 Note that all other versions of select syscalls will not have y2038 safe versions. Signed-off-by: Deepa Dinamani <deepa.kernel@gmail.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2018-12-06ppoll: use __kernel_timespecDeepa Dinamani1-55/+111
struct timespec is not y2038 safe. struct __kernel_timespec is the new y2038 safe structure for all syscalls that are using struct timespec. Update ppoll interfaces to use struct __kernel_timespec. sigset_t also has different representations on 32 bit and 64 bit architectures. Hence, we need to support the following different syscalls: New y2038 safe syscalls: (Controlled by CONFIG_64BIT_TIME for 32 bit ABIs) Native 64 bit(unchanged) and native 32 bit : sys_ppoll Compat : compat_sys_ppoll_time64 Older y2038 unsafe syscalls: (Controlled by CONFIG_32BIT_COMPAT_TIME for 32 bit ABIs) Native 32 bit : ppoll_time32 Compat : compat_sys_ppoll Signed-off-by: Deepa Dinamani <deepa.kernel@gmail.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2018-12-06signal: Add restore_user_sigmask()Deepa Dinamani1-52/+8
Refactor the logic to restore the sigmask before the syscall returns into an api. This is useful for versions of syscalls that pass in the sigmask and expect the current->sigmask to be changed during the execution and restored after the execution of the syscall. With the advent of new y2038 syscalls in the subsequent patches, we add two more new versions of the syscalls (for pselect, ppoll and io_pgetevents) in addition to the existing native and compat versions. Adding such an api reduces the logic that would need to be replicated otherwise. Signed-off-by: Deepa Dinamani <deepa.kernel@gmail.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2018-12-06signal: Add set_user_sigmask()Deepa Dinamani1-38/+12
Refactor reading sigset from userspace and updating sigmask into an api. This is useful for versions of syscalls that pass in the sigmask and expect the current->sigmask to be changed during, and restored after, the execution of the syscall. With the advent of new y2038 syscalls in the subsequent patches, we add two more new versions of the syscalls (for pselect, ppoll, and io_pgetevents) in addition to the existing native and compat versions. Adding such an api reduces the logic that would need to be replicated otherwise. Note that the calls to sigprocmask() ignored the return value from the api as the function only returns an error on an invalid first argument that is hardcoded at these call sites. The updated logic uses set_current_blocked() instead. Signed-off-by: Deepa Dinamani <deepa.kernel@gmail.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2018-08-27y2038: globally rename compat_time to old_time32Arnd Bergmann1-10/+10
Christoph Hellwig suggested a slightly different path for handling backwards compatibility with the 32-bit time_t based system calls: Rather than simply reusing the compat_sys_* entry points on 32-bit architectures unchanged, we get rid of those entry points and the compat_time types by renaming them to something that makes more sense on 32-bit architectures (which don't have a compat mode otherwise), and then share the entry points under the new name with the 64-bit architectures that use them for implementing the compatibility. The following types and interfaces are renamed here, and moved from linux/compat_time.h to linux/time32.h: old new --- --- compat_time_t old_time32_t struct compat_timeval struct old_timeval32 struct compat_timespec struct old_timespec32 struct compat_itimerspec struct old_itimerspec32 ns_to_compat_timeval() ns_to_old_timeval32() get_compat_itimerspec64() get_old_itimerspec32() put_compat_itimerspec64() put_old_itimerspec32() compat_get_timespec64() get_old_timespec32() compat_put_timespec64() put_old_timespec32() As we already have aliases in place, this patch addresses only the instances that are relevant to the system call interface in particular, not those that occur in device drivers and other modules. Those will get handled separately, while providing the 64-bit version of the respective interfaces. I'm not renaming the timex, rusage and itimerval structures, as we are still debating what the new interface will look like, and whether we will need a replacement at all. This also doesn't change the names of the syscall entry points, which can be done more easily when we actually switch over the 32-bit architectures to use them, at that point we need to change COMPAT_SYSCALL_DEFINEx to SYSCALL_DEFINEx with a new name, e.g. with a _time32 suffix. Suggested-by: Christoph Hellwig <hch@infradead.org> Link: https://lore.kernel.org/lkml/20180705222110.GA5698@infradead.org/ Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2018-06-28Revert changes to convert to ->poll_mask() and aio IOCB_CMD_POLLLinus Torvalds1-23/+0
The poll() changes were not well thought out, and completely unexplained. They also caused a huge performance regression, because "->poll()" was no longer a trivial file operation that just called down to the underlying file operations, but instead did at least two indirect calls. Indirect calls are sadly slow now with the Spectre mitigation, but the performance problem could at least be largely mitigated by changing the "->get_poll_head()" operation to just have a per-file-descriptor pointer to the poll head instead. That gets rid of one of the new indirections. But that doesn't fix the new complexity that is completely unwarranted for the regular case. The (undocumented) reason for the poll() changes was some alleged AIO poll race fixing, but we don't make the common case slower and more complex for some uncommon special case, so this all really needs way more explanations and most likely a fundamental redesign. [ This revert is a revert of about 30 different commits, not reverted individually because that would just be unnecessarily messy - Linus ] Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Christoph Hellwig <hch@lst.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-06-13treewide: kmalloc() -> kmalloc_array()Kees Cook1-1/+1
The kmalloc() function has a 2-factor argument form, kmalloc_array(). This patch replaces cases of: kmalloc(a * b, gfp) with: kmalloc_array(a * b, gfp) as well as handling cases of: kmalloc(a * b * c, gfp) with: kmalloc(array3_size(a, b, c), gfp) as it's slightly less ugly than: kmalloc_array(array_size(a, b), c, gfp) This does, however, attempt to ignore constant size factors like: kmalloc(4 * 1024, gfp) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. The tools/ directory was manually excluded, since it has its own implementation of kmalloc(). The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ type TYPE; expression THING, E; @@ ( kmalloc( - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | kmalloc( - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression COUNT; typedef u8; typedef __u8; @@ ( kmalloc( - sizeof(u8) * (COUNT) + COUNT , ...) | kmalloc( - sizeof(__u8) * (COUNT) + COUNT , ...) | kmalloc( - sizeof(char) * (COUNT) + COUNT , ...) | kmalloc( - sizeof(unsigned char) * (COUNT) + COUNT , ...) | kmalloc( - sizeof(u8) * COUNT + COUNT , ...) | kmalloc( - sizeof(__u8) * COUNT + COUNT , ...) | kmalloc( - sizeof(char) * COUNT + COUNT , ...) | kmalloc( - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( - kmalloc + kmalloc_array ( - sizeof(TYPE) * (COUNT_ID) + COUNT_ID, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * COUNT_ID + COUNT_ID, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * (COUNT_CONST) + COUNT_CONST, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * COUNT_CONST + COUNT_CONST, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * (COUNT_ID) + COUNT_ID, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * COUNT_ID + COUNT_ID, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * (COUNT_CONST) + COUNT_CONST, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * COUNT_CONST + COUNT_CONST, sizeof(THING) , ...) ) // 2-factor product, only identifiers. @@ identifier SIZE, COUNT; @@ - kmalloc + kmalloc_array ( - SIZE * COUNT + COUNT, SIZE , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( kmalloc( - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kmalloc( - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kmalloc( - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kmalloc( - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kmalloc( - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kmalloc( - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kmalloc( - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kmalloc( - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( kmalloc( - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kmalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kmalloc( - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kmalloc( - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kmalloc( - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | kmalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ identifier STRIDE, SIZE, COUNT; @@ ( kmalloc( - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products, // when they're not all constants... @@ expression E1, E2, E3; constant C1, C2, C3; @@ ( kmalloc(C1 * C2 * C3, ...) | kmalloc( - (E1) * E2 * E3 + array3_size(E1, E2, E3) , ...) | kmalloc( - (E1) * (E2) * E3 + array3_size(E1, E2, E3) , ...) | kmalloc( - (E1) * (E2) * (E3) + array3_size(E1, E2, E3) , ...) | kmalloc( - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants, // keeping sizeof() as the second factor argument. @@ expression THING, E1, E2; type TYPE; constant C1, C2, C3; @@ ( kmalloc(sizeof(THING) * C2, ...) | kmalloc(sizeof(TYPE) * C2, ...) | kmalloc(C1 * C2 * C3, ...) | kmalloc(C1 * C2, ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * (E2) + E2, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * E2 + E2, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * (E2) + E2, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * E2 + E2, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - (E1) * E2 + E1, E2 , ...) | - kmalloc + kmalloc_array ( - (E1) * (E2) + E1, E2 , ...) | - kmalloc + kmalloc_array ( - E1 * E2 + E1, E2 , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org>
2018-05-26fs: introduce new ->get_poll_head and ->poll_mask methodsChristoph Hellwig1-0/+23
->get_poll_head returns the waitqueue that the poll operation is going to sleep on. Note that this means we can only use a single waitqueue for the poll, unlike some current drivers that use two waitqueues for different events. But now that we have keyed wakeups and heavily use those for poll there aren't that many good reason left to keep the multiple waitqueues, and if there are any ->poll is still around, the driver just won't support aio poll. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
2018-05-26fs: add new vfs_poll and file_can_poll helpersChristoph Hellwig1-15/+8
These abstract out calls to the poll method in preparation for changes in how we poll. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
2018-05-26fs: cleanup do_pollfdChristoph Hellwig1-25/+23
Use straightline code with failure handling gotos instead of a lot of nested conditionals. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
2018-05-26fs: unexport poll_schedule_timeoutChristoph Hellwig1-2/+1
No users outside of select.c. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
2018-04-02fs: add do_compat_select() helper; remove in-kernel call to compat syscallDominik Brodowski1-5/+12
Using the fs-internal do_compat_select() helper allows us to get rid of the fs-internal call to the compat_sys_select() syscall. This patch is part of a series which removes in-kernel calls to syscalls. On this basis, the syscall entry path can be streamlined. For details, see http://lkml.kernel.org/r/20180325162527.GA17492@light.dominikbrodowski.net Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2018-04-02fs: add kern_select() helper; remove in-kernel call to sys_select()Dominik Brodowski1-3/+9
Using this helper allows us to avoid the in-kernel call to the sys_umount() syscall. This patch is part of a series which removes in-kernel calls to syscalls. On this basis, the syscall entry path can be streamlined. For details, see http://lkml.kernel.org/r/20180325162527.GA17492@light.dominikbrodowski.net Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2018-02-12vfs: do bulk POLL* -> EPOLL* replacementLinus Torvalds1-5/+5
This is the mindless scripted replacement of kernel use of POLL* variables as described by Al, done by this script: for V in IN OUT PRI ERR RDNORM RDBAND WRNORM WRBAND HUP RDHUP NVAL MSG; do L=`git grep -l -w POLL$V | grep -v '^t' | grep -v /um/ | grep -v '^sa' | grep -v '/poll.h$'|grep -v '^D'` for f in $L; do sed -i "-es/^\([^\"]*\)\(\<POLL$V\>\)/\\1E\\2/" $f; done done with de-mangling cleanups yet to come. NOTE! On almost all architectures, the EPOLL* constants have the same values as the POLL* constants do. But they keyword here is "almost". For various bad reasons they aren't the same, and epoll() doesn't actually work quite correctly in some cases due to this on Sparc et al. The next patch from Al will sort out the final differences, and we should be all done. Scripted-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-11-30make kernel-side POLL... arch-independentAl Viro1-2/+2
mangle/demangle on the way to/from userland Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2017-11-28annotate poll(2) gutsAl Viro1-6/+10
struct pollfd contains two 16bit fields (mask and result) that encode the POLL... bitmaps. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2017-11-28annotate poll_table_struct ->_keyAl Viro1-2/+2
Only POLL... bitmaps ever end up there and their only use is checking for POLL... bits in them. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2017-11-28annotate poll-related wait keysAl Viro1-1/+1
__poll_t is also used as wait key in some waitqueues. Verify that wait_..._poll() gets __poll_t as key and provide a helper for wakeup functions to get back to that __poll_t value. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2017-11-28anntotate the places where ->poll() return values goAl Viro1-2/+3
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2017-11-17Merge branch 'misc.compat' of ↵Linus Torvalds1-42/+26
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull compat and uaccess updates from Al Viro: - {get,put}_compat_sigset() series - assorted compat ioctl stuff - more set_fs() elimination - a few more timespec64 conversions - several removals of pointless access_ok() in places where it was followed only by non-__ variants of primitives * 'misc.compat' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (24 commits) coredump: call do_unlinkat directly instead of sys_unlink fs: expose do_unlinkat for built-in callers ext4: take handling of EXT4_IOC_GROUP_ADD into a helper, get rid of set_fs() ipmi: get rid of pointless access_ok() pi433: sanitize ioctl cxlflash: get rid of pointless access_ok() mtdchar: get rid of pointless access_ok() r128: switch compat ioctls to drm_ioctl_kernel() selection: get rid of field-by-field copyin VT_RESIZEX: get rid of field-by-field copyin i2c compat ioctls: move to ->compat_ioctl() sched_rr_get_interval(): move compat to native, get rid of set_fs() mips: switch to {get,put}_compat_sigset() sparc: switch to {get,put}_compat_sigset() s390: switch to {get,put}_compat_sigset() ppc: switch to {get,put}_compat_sigset() parisc: switch to {get,put}_compat_sigset() get_compat_sigset() get rid of {get,put}_compat_itimerspec() io_getevents: Use timespec64 to represent timeouts ...
2017-11-02License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseGreg Kroah-Hartman1-0/+1
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-09-20get_compat_sigset()Al Viro1-6/+2
similar to put_compat_sigset() Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2017-09-20select: Use get/put_timespec64Deepa Dinamani1-36/+24
Usage of these apis and their compat versions makes the syscalls: select family of syscalls and their compat implementations simpler. This is a preparatory patch to isolate data conversions to struct timespec64 at userspace boundaries. This helps contain the changes needed to transition to new y2038 safe types. Signed-off-by: Deepa Dinamani <deepa.kernel@gmail.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2017-08-29fs/select: Fix memory corruption in compat_get_fd_set()Helge Deller1-5/+1
Commit 464d62421cb8 ("select: switch compat_{get,put}_fd_set() to compat_{get,put}_bitmap()") changed the calculation on how many bytes need to be zeroed when userspace handed over a NULL pointer for a fdset array in the select syscall. The calculation was changed in compat_get_fd_set() wrongly from memset(fdset, 0, ((nr + 1) & ~1)*sizeof(compat_ulong_t)); to memset(fdset, 0, ALIGN(nr, BITS_PER_LONG)); The ALIGN(nr, BITS_PER_LONG) calculates the number of _bits_ which need to be zeroed in the target fdset array (rounded up to the next full bits for an unsigned long). But the memset() call expects the number of _bytes_ to be zeroed. This leads to clearing more memory than wanted (on the stack area or even at kmalloc()ed memory areas) and to random kernel crashes as we have seen them on the parisc platform. The correct change should have been memset(fdset, 0, (ALIGN(nr, BITS_PER_LONG) / BITS_PER_LONG) * BYTES_PER_LONG); which is the same as can be archieved with a call to zero_fd_set(nr, fdset). Fixes: 464d62421cb8 ("select: switch compat_{get,put}_fd_set() to compat_{get,put}_bitmap()" Acked-by:: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Helge Deller <deller@gmx.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-07-07Merge branch 'misc.compat' of ↵Linus Torvalds1-39/+5
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull misc compat stuff updates from Al Viro: "This part is basically untangling various compat stuff. Compat syscalls moved to their native counterparts, getting rid of quite a bit of double-copying and/or set_fs() uses. A lot of field-by-field copyin/copyout killed off. - kernel/compat.c is much closer to containing just the copyin/copyout of compat structs. Not all compat syscalls are gone from it yet, but it's getting there. - ipc/compat_mq.c killed off completely. - block/compat_ioctl.c cleaned up; floppy compat ioctls moved to drivers/block/floppy.c where they belong. Yes, there are several drivers that implement some of the same ioctls. Some are m68k and one is 32bit-only pmac. drivers/block/floppy.c is the only one in that bunch that can be built on biarch" * 'misc.compat' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: mqueue: move compat syscalls to native ones usbdevfs: get rid of field-by-field copyin compat_hdio_ioctl: get rid of set_fs() take floppy compat ioctls to sodding floppy.c ipmi: get rid of field-by-field __get_user() ipmi: get COMPAT_IPMICTL_RECEIVE_MSG in sync with the native one rt_sigtimedwait(): move compat to native select: switch compat_{get,put}_fd_set() to compat_{get,put}_bitmap() put_compat_rusage(): switch to copy_to_user() sigpending(): move compat to native getrlimit()/setrlimit(): move compat to native times(2): move compat to native compat_{get,put}_bitmap(): use unsafe_{get,put}_user() fb_get_fscreeninfo(): don't bother with do_fb_ioctl() do_sigaltstack(): lift copying to/from userland into callers take compat_sys_old_getrlimit() to native syscall trim __ARCH_WANT_SYS_OLD_GETRLIMIT
2017-06-20sched/wait: Rename wait_queue_t => wait_queue_entry_tIngo Molnar1-2/+2
Rename: wait_queue_t => wait_queue_entry_t 'wait_queue_t' was always a slight misnomer: its name implies that it's a "queue", but in reality it's a queue *entry*. The 'real' queue is the wait queue head, which had to carry the name. Start sorting this out by renaming it to 'wait_queue_entry_t'. This also allows the real structure name 'struct __wait_queue' to lose its double underscore and become 'struct wait_queue_entry', which is the more canonical nomenclature for such data types. Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-06-10select: switch compat_{get,put}_fd_set() to compat_{get,put}_bitmap()Al Viro1-39/+5
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2017-05-09treewide: use kv[mz]alloc* rather than opencoded variantsMichal Hocko1-4/+1
There are many code paths opencoding kvmalloc. Let's use the helper instead. The main difference to kvmalloc is that those users are usually not considering all the aspects of the memory allocator. E.g. allocation requests <= 32kB (with 4kB pages) are basically never failing and invoke OOM killer to satisfy the allocation. This sounds too disruptive for something that has a reasonable fallback - the vmalloc. On the other hand those requests might fallback to vmalloc even when the memory allocator would succeed after several more reclaim/compaction attempts previously. There is no guarantee something like that happens though. This patch converts many of those places to kv[mz]alloc* helpers because they are more conservative. Link: http://lkml.kernel.org/r/20170306103327.2766-2-mhocko@kernel.org Signed-off-by: Michal Hocko <mhocko@suse.com> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> # Xen bits Acked-by: Kees Cook <keescook@chromium.org> Acked-by: Vlastimil Babka <vbabka@suse.cz> Acked-by: Andreas Dilger <andreas.dilger@intel.com> # Lustre Acked-by: Christian Borntraeger <borntraeger@de.ibm.com> # KVM/s390 Acked-by: Dan Williams <dan.j.williams@intel.com> # nvdim Acked-by: David Sterba <dsterba@suse.com> # btrfs Acked-by: Ilya Dryomov <idryomov@gmail.com> # Ceph Acked-by: Tariq Toukan <tariqt@mellanox.com> # mlx4 Acked-by: Leon Romanovsky <leonro@mellanox.com> # mlx5 Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: Anton Vorontsov <anton@enomsg.org> Cc: Colin Cross <ccross@android.com> Cc: Tony Luck <tony.luck@intel.com> Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net> Cc: Ben Skeggs <bskeggs@redhat.com> Cc: Kent Overstreet <kent.overstreet@gmail.com> Cc: Santosh Raspatur <santosh@chelsio.com> Cc: Hariprasad S <hariprasad@chelsio.com> Cc: Yishai Hadas <yishaih@mellanox.com> Cc: Oleg Drokin <oleg.drokin@intel.com> Cc: "Yan, Zheng" <zyan@redhat.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Eric Dumazet <eric.dumazet@gmail.com> Cc: David Miller <davem@davemloft.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-05-03Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-nextLinus Torvalds1-8/+8
Pull networking updates from David Millar: "Here are some highlights from the 2065 networking commits that happened this development cycle: 1) XDP support for IXGBE (John Fastabend) and thunderx (Sunil Kowuri) 2) Add a generic XDP driver, so that anyone can test XDP even if they lack a networking device whose driver has explicit XDP support (me). 3) Sparc64 now has an eBPF JIT too (me) 4) Add a BPF program testing framework via BPF_PROG_TEST_RUN (Alexei Starovoitov) 5) Make netfitler network namespace teardown less expensive (Florian Westphal) 6) Add symmetric hashing support to nft_hash (Laura Garcia Liebana) 7) Implement NAPI and GRO in netvsc driver (Stephen Hemminger) 8) Support TC flower offload statistics in mlxsw (Arkadi Sharshevsky) 9) Multiqueue support in stmmac driver (Joao Pinto) 10) Remove TCP timewait recycling, it never really could possibly work well in the real world and timestamp randomization really zaps any hint of usability this feature had (Soheil Hassas Yeganeh) 11) Support level3 vs level4 ECMP route hashing in ipv4 (Nikolay Aleksandrov) 12) Add socket busy poll support to epoll (Sridhar Samudrala) 13) Netlink extended ACK support (Johannes Berg, Pablo Neira Ayuso, and several others) 14) IPSEC hw offload infrastructure (Steffen Klassert)" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (2065 commits) tipc: refactor function tipc_sk_recv_stream() tipc: refactor function tipc_sk_recvmsg() net: thunderx: Optimize page recycling for XDP net: thunderx: Support for XDP header adjustment net: thunderx: Add support for XDP_TX net: thunderx: Add support for XDP_DROP net: thunderx: Add basic XDP support net: thunderx: Cleanup receive buffer allocation net: thunderx: Optimize CQE_TX handling net: thunderx: Optimize RBDR descriptor handling net: thunderx: Support for page recycling ipx: call ipxitf_put() in ioctl error path net: sched: add helpers to handle extended actions qed*: Fix issues in the ptp filter config implementation. qede: Fix concurrency issue in PTP Tx path processing. stmmac: Add support for SIMATIC IOT2000 platform net: hns: fix ethtool_get_strings overflow in hns driver tcp: fix wraparound issue in tcp_lp bpf, arm64: fix jit branch offset related to ldimm64 bpf, arm64: implement jiting of BPF_XADD ...
2017-04-17move compat select-related syscalls to fs/select.cAl Viro1-2/+419
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2017-03-25net: Track start of busy loop instead of when it should endAlexander Duyck1-8/+8
This patch flips the logic we were using to determine if the busy polling has timed out. The main motivation for this is that we will need to support two different possible timeout values in the future and by recording the start time rather than when we would want to end we can focus on making the end_time specific to the task be it epoll or socket based polling. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-02sched/headers: Prepare for new header dependencies before moving code to ↵Ingo Molnar1-2/+2
<linux/sched/signal.h> We are going to split <linux/sched/signal.h> out of <linux/sched.h>, which will have to be picked up from other headers and a couple of .c files. Create a trivial placeholder <linux/sched/signal.h> file that just maps to <linux/sched.h> to make this patch obviously correct and bisectable. Include the new header in the files that are going to need it. Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-12-24Replace <asm/uaccess.h> with <linux/uaccess.h> globallyLinus Torvalds1-1/+1
This was entirely automated, using the script by Al: PATT='^[[:blank:]]*#[[:blank:]]*include[[:blank:]]*<asm/uaccess.h>' sed -i -e "s!$PATT!#include <linux/uaccess.h>!" \ $(git grep -l "$PATT"|grep -v ^include/linux/uaccess.h) to do the replacement at the end of the merge window. Requested-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-10-12fs/select: add vmalloc fallback for select(2)Vlastimil Babka1-3/+11
The select(2) syscall performs a kmalloc(size, GFP_KERNEL) where size grows with the number of fds passed. We had a customer report page allocation failures of order-4 for this allocation. This is a costly order, so it might easily fail, as the VM expects such allocation to have a lower-order fallback. Such trivial fallback is vmalloc(), as the memory doesn't have to be physically contiguous and the allocation is temporary for the duration of the syscall only. There were some concerns, whether this would have negative impact on the system by exposing vmalloc() to userspace. Although an excessive use of vmalloc can cause some system wide performance issues - TLB flushes etc. - a large order allocation is not for free either and an excessive reclaim/compaction can have a similar effect. Also note that the size is effectively limited by RLIMIT_NOFILE which defaults to 1024 on the systems I checked. That means the bitmaps will fit well within single page and thus the vmalloc() fallback could be only excercised for processes where root allows a higher limit. Note that the poll(2) syscall seems to use a linked list of order-0 pages, so it doesn't need this kind of fallback. [eric.dumazet@gmail.com: fix failure path logic] [akpm@linux-foundation.org: use proper type for size] Link: http://lkml.kernel.org/r/20160927084536.5923-1-vbabka@suse.cz Signed-off-by: Vlastimil Babka <vbabka@suse.cz> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Eric Dumazet <eric.dumazet@gmail.com> Cc: David Laight <David.Laight@ACULAB.COM> Cc: Hillf Danton <hillf.zj@alibaba-inc.com> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Jason Baron <jbaron@akamai.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-05-20fs: poll/select/recvmmsg: use timespec64 for timeout eventsDeepa Dinamani1-30/+37
struct timespec is not y2038 safe. Even though timespec might be sufficient to represent timeouts, use struct timespec64 here as the plan is to get rid of all timespec reference in the kernel. The patch transitions the common functions: poll_select_set_timeout() and select_estimate_accuracy() to use timespec64. And, all the syscalls that use these functions are transitioned in the same patch. The restart block parameters for poll uses monotonic time. Use timespec64 here as well to assign timeout value. This parameter in the restart block need not change because this only holds the monotonic timestamp at which timeout should occur. And, unsigned long data type should be big enough for this timestamp. The system call interfaces will be handled in a separate series. Compat interfaces need not change as timespec64 is an alias to struct timespec on a 64 bit system. Link: http://lkml.kernel.org/r/1461947989-21926-3-git-send-email-deepa.kernel@gmail.com Signed-off-by: Deepa Dinamani <deepa.kernel@gmail.com> Acked-by: John Stultz <john.stultz@linaro.org> Acked-by: David S. Miller <davem@davemloft.net> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-18timer: convert timer_slack_ns from unsigned long to u64John Stultz1-4/+4
This patchset introduces a /proc/<pid>/timerslack_ns interface which would allow controlling processes to be able to set the timerslack value on other processes in order to save power by avoiding wakeups (Something Android currently does via out-of-tree patches). The first patch tries to fix the internal timer_slack_ns usage which was defined as a long, which limits the slack range to ~4 seconds on 32bit systems. It converts it to a u64, which provides the same basically unlimited slack (500 years) on both 32bit and 64bit machines. The second patch introduces the /proc/<pid>/timerslack_ns interface which allows the full 64bit slack range for a task to be read or set on both 32bit and 64bit machines. With these two patches, on a 32bit machine, after setting the slack on bash to 10 seconds: $ time sleep 1 real 0m10.747s user 0m0.001s sys 0m0.005s The first patch is a little ugly, since I had to chase the slack delta arguments through a number of functions converting them to u64s. Let me know if it makes sense to break that up more or not. Other than that things are fairly straightforward. This patch (of 2): The timer_slack_ns value in the task struct is currently a unsigned long. This means that on 32bit applications, the maximum slack is just over 4 seconds. However, on 64bit machines, its much much larger (~500 years). This disparity could make application development a little (as well as the default_slack) to a u64. This means both 32bit and 64bit systems have the same effective internal slack range. Now the existing ABI via PR_GET_TIMERSLACK and PR_SET_TIMERSLACK specify the interface as a unsigned long, so we preserve that limitation on 32bit systems, where SET_TIMERSLACK can only set the slack to a unsigned long value, and GET_TIMERSLACK will return ULONG_MAX if the slack is actually larger then what can be stored by an unsigned long. This patch also modifies hrtimer functions which specified the slack delta as a unsigned long. Signed-off-by: John Stultz <john.stultz@linaro.org> Cc: Arjan van de Ven <arjan@linux.intel.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Oren Laadan <orenl@cellrox.com> Cc: Ruchi Kandoi <kandoiruchi@google.com> Cc: Rom Lemarchand <romlem@android.com> Cc: Kees Cook <keescook@chromium.org> Cc: Android Kernel Team <kernel-team@android.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-01-06poll: plug an unused argument to do_pollMateusz Guzik1-3/+3
Number of fds is already known based on passed list. No functional changes. Signed-off-by: Mateusz Guzik <mguzik@redhat.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-05-19locking/arch: Rename set_mb() to smp_store_mb()Peter Zijlstra1-3/+3
Since set_mb() is really about an smp_mb() -- not a IO/DMA barrier like mb() rename it to match the recent smp_load_acquire() and smp_store_release(). Suggested-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-02-13all arches, signal: move restart_block to struct task_structAndy Lutomirski1-1/+1
If an attacker can cause a controlled kernel stack overflow, overwriting the restart block is a very juicy exploit target. This is because the restart_block is held in the same memory allocation as the kernel stack. Moving the restart block to struct task_struct prevents this exploit by making the restart_block harder to locate. Note that there are other fields in thread_info that are also easy targets, at least on some architectures. It's also a decent simplification, since the restart code is more or less identical on all architectures. [james.hogan@imgtec.com: metag: align thread_info::supervisor_stack] Signed-off-by: Andy Lutomirski <luto@amacapital.net> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Kees Cook <keescook@chromium.org> Cc: David Miller <davem@davemloft.net> Acked-by: Richard Weinberger <richard@nod.at> Cc: Richard Henderson <rth@twiddle.net> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: Matt Turner <mattst88@gmail.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will.deacon@arm.com> Cc: Haavard Skinnemoen <hskinnemoen@gmail.com> Cc: Hans-Christian Egtvedt <egtvedt@samfundet.no> Cc: Steven Miao <realmz6@gmail.com> Cc: Mark Salter <msalter@redhat.com> Cc: Aurelien Jacquiot <a-jacquiot@ti.com> Cc: Mikael Starvik <starvik@axis.com> Cc: Jesper Nilsson <jesper.nilsson@axis.com> Cc: David Howells <dhowells@redhat.com> Cc: Richard Kuo <rkuo@codeaurora.org> Cc: "Luck, Tony" <tony.luck@intel.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Michal Simek <monstr@monstr.eu> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Jonas Bonn <jonas@southpole.se> Cc: "James E.J. Bottomley" <jejb@parisc-linux.org> Cc: Helge Deller <deller@gmx.de> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Acked-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc) Tested-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc) Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Chen Liqin <liqin.linux@gmail.com> Cc: Lennox Wu <lennox.wu@gmail.com> Cc: Chris Metcalf <cmetcalf@ezchip.com> Cc: Guan Xuetao <gxt@mprc.pku.edu.cn> Cc: Chris Zankel <chris@zankel.net> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Guenter Roeck <linux@roeck-us.net> Signed-off-by: James Hogan <james.hogan@imgtec.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-11-13Merge branch 'for-linus' of ↵Linus Torvalds1-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull vfs updates from Al Viro: "All kinds of stuff this time around; some more notable parts: - RCU'd vfsmounts handling - new primitives for coredump handling - files_lock is gone - Bruce's delegations handling series - exportfs fixes plus misc stuff all over the place" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (101 commits) ecryptfs: ->f_op is never NULL locks: break delegations on any attribute modification locks: break delegations on link locks: break delegations on rename locks: helper functions for delegation breaking locks: break delegations on unlink namei: minor vfs_unlink cleanup locks: implement delegations locks: introduce new FL_DELEG lock flag vfs: take i_mutex on renamed file vfs: rename I_MUTEX_QUOTA now that it's not used for quotas vfs: don't use PARENT/CHILD lock classes for non-directories vfs: pull ext4's double-i_mutex-locking into common code exportfs: fix quadratic behavior in filehandle lookup exportfs: better variable name exportfs: move most of reconnect_path to helper function exportfs: eliminate unused "noprogress" counter exportfs: stop retrying once we race with rename/remove exportfs: clear DISCONNECTED on all parents sooner exportfs: more detailed comment for path_reconnect ...
2013-10-30Revert "select: use freezable blocking call"Rafael J. Wysocki1-2/+1
This reverts commit 9745cdb36da8 (select: use freezable blocking call) that triggers problems during resume from suspend to RAM on Paul Bolle's 32-bit x86 machines. Paul says: Ever since I tried running (release candidates of) v3.11 on the two working i686s I still have lying around I ran into issues on resuming from suspend. Reverting 9745cdb36da8 (select: use freezable blocking call) resolves those issues. Resuming from suspend on i686 on (release candidates of) v3.11 and later triggers issues like: traps: systemd[1] general protection ip:b738e490 sp:bf882fc0 error:0 in libc-2.16.so[b731c000+1b0000] and traps: rtkit-daemon[552] general protection ip:804d6e5 sp:b6cb32f0 error:0 in rtkit-daemon[8048000+d000] Once I hit the systemd error I can only get out of the mess that the system is at that point by power cycling it. Since we are reverting another freezer-related change causing similar problems to happen, this one should be reverted as well. References: https://lkml.org/lkml/2013/10/29/583 Reported-by: Paul Bolle <pebolle@tiscali.nl> Fixes: 9745cdb36da8 (select: use freezable blocking call) Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Cc: 3.11+ <stable@vger.kernel.org> # 3.11+
2013-10-25file->f_op is never NULL...Al Viro1-2/+2
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-07-11net: rename include/net/ll_poll.h to include/net/busy_poll.hEliezer Tamir1-1/+1
Rename the file and correct all the places where it is included. Signed-off-by: Eliezer Tamir <eliezer.tamir@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>