summaryrefslogtreecommitdiff
path: root/fs/statfs.c
AgeCommit message (Collapse)AuthorFilesLines
2019-10-04vfs: Fix EOVERFLOW testing in put_compat_statfs64Eric Sandeen1-13/+4
Today, put_compat_statfs64() disallows nearly any field value over 2^32 if f_bsize is only 32 bits, but that makes no sense. compat_statfs64 is there for the explicit purpose of providing 64-bit fields for f_files, f_ffree, etc. And f_bsize is always only 32 bits. As a result, 32-bit userspace gets -EOVERFLOW for i.e. large file counts even with -D_FILE_OFFSET_BITS=64 set. In reality, only f_bsize and f_frsize can legitimately overflow (fields like f_type and f_namelen should never be large), so test only those fields. This bug was discussed at length some time ago, and this is the proposal Al suggested at https://lkml.org/lkml/2018/8/6/640. It seemed to get dropped amid the discussion of other related changes, but this part seems obviously correct on its own, so I've picked it up and sent it, for expediency. Fixes: 64d2ab32efe3 ("vfs: fix put_compat_statfs64() does not handle errors") Signed-off-by: Eric Sandeen <sandeen@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-02-07vfs: add vfs_get_fsid() helperAmir Goldstein1-0/+14
Wrapper around statfs() interface. Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Amir Goldstein <amir73il@gmail.com> Signed-off-by: Jan Kara <jack@suse.cz>
2018-07-12kernel: add kcompat_sys_{f,}statfs64()Mark Rutland1-2/+12
Using this helper allows us to avoid the in-kernel calls to the compat_sys_{f,}statfs64() sycalls, as are necessary for parameter mangling in arm64's compat handling. Following the example of ksys_* functions, kcompat_sys_* functions are intended to be a drop-in replacement for their compat_sys_* counterparts, with the same calling convention. This is necessary to enable conversion of arm64's syscall handling to use pt_regs wrappers. Signed-off-by: Mark Rutland <mark.rutland@arm.com> Reviewed-by: Dominik Brodowski <linux@dominikbrodowski.net> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: linux-fsdevel@vger.kernel.org Signed-off-by: Will Deacon <will.deacon@arm.com>
2017-11-28Rename superblock flags (MS_xyz -> SB_xyz)Linus Torvalds1-3/+3
This is a pure automated search-and-replace of the internal kernel superblock flags. The s_flags are now called SB_*, with the names and the values for the moment mirroring the MS_* flags that they're equivalent to. Note how the MS_xyz flags are the ones passed to the mount system call, while the SB_xyz flags are what we then use in sb->s_flags. The script to do this was: # places to look in; re security/*: it generally should *not* be # touched (that stuff parses mount(2) arguments directly), but # there are two places where we really deal with superblock flags. FILES="drivers/mtd drivers/staging/lustre fs ipc mm \ include/linux/fs.h include/uapi/linux/bfs_fs.h \ security/apparmor/apparmorfs.c security/apparmor/include/lib.h" # the list of MS_... constants SYMS="RDONLY NOSUID NODEV NOEXEC SYNCHRONOUS REMOUNT MANDLOCK \ DIRSYNC NOATIME NODIRATIME BIND MOVE REC VERBOSE SILENT \ POSIXACL UNBINDABLE PRIVATE SLAVE SHARED RELATIME KERNMOUNT \ I_VERSION STRICTATIME LAZYTIME SUBMOUNT NOREMOTELOCK NOSEC BORN \ ACTIVE NOUSER" SED_PROG= for i in $SYMS; do SED_PROG="$SED_PROG -e s/MS_$i/SB_$i/g"; done # we want files that contain at least one of MS_..., # with fs/namespace.c and fs/pnode.c excluded. L=$(for i in $SYMS; do git grep -w -l MS_$i $FILES; done| sort|uniq|grep -v '^fs/namespace.c'|grep -v '^fs/pnode.c') for f in $L; do sed -i $f $SED_PROG; done Requested-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-11-17Merge branch 'work.misc' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull misc vfs updates from Al Viro: "Assorted stuff, really no common topic here" * 'work.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: vfs: grab the lock instead of blocking in __fd_install during resizing vfs: stop clearing close on exec when closing a fd include/linux/fs.h: fix comment about struct address_space fs: make fiemap work from compat_ioctl coda: fix 'kernel memory exposure attempt' in fsync pstore: remove unneeded unlikely() vfs: remove unneeded unlikely() stubs for mount_bdev() and kill_block_super() in !CONFIG_BLOCK case make vfs_ustat() static do_handle_open() should be static elf_fdpic: fix unused variable warning fold destroy_super() into __put_super() new helper: destroy_unused_super() fix address space warnings in ipc/ acct.h: get rid of detritus
2017-11-02License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseGreg Kroah-Hartman1-0/+1
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-10-15make vfs_ustat() staticAl Viro1-1/+1
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2017-07-08Merge branch 'work.misc' of ↵Linus Torvalds1-0/+2
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull misc filesystem updates from Al Viro: "Assorted normal VFS / filesystems stuff..." * 'work.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: dentry name snapshots Make statfs properly return read-only state after emergency remount fs/dcache: init in_lookup_hashtable minix: Deinline get_block, save 2691 bytes fs: Reorder inode_owner_or_capable() to avoid needless fs: warn in case userspace lied about modprobe return
2017-06-30Make statfs properly return read-only state after emergency remountCarlos Maiolino1-0/+2
Emergency remount (sysrq-u) sets MS_RDONLY to the superblock but doesn't set MNT_READONLY to the mount point. Once calculate_f_flags() only check for the mount point read only state, when setting kstatfs flags, after an emergency remount, statfs does not report the filesystem as read-only, even though it is. Enable flags_by_sb() to also check for superblock read only state, so the kstatfs and consequently statfs can properly show the read-only state of the filesystem. Signed-off-by: Carlos Maiolino <cmaiolino@redhat.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2017-06-04compat statfs: switch to copy_to_user()Al Viro1-28/+30
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2017-04-17statfs: move compat syscalls from compat.cAl Viro1-0/+140
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2016-12-06vfs: misc struct path constificationAl Viro1-1/+1
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-10-13vfs: allow O_PATH file descriptors for fstatfs()Linus Torvalds1-1/+1
Olga reported that file descriptors opened with O_PATH do not work with fstatfs(), found during further development of ksh93's thread support. There is no reason to not allow O_PATH file descriptors here (fstatfs is very much a path operation), so use "fdget_raw()". See commit 55815f70147d ("vfs: make O_PATH file descriptors usable for 'fstat()'") for a very similar issue reported for fstat() by the same team. Reported-and-tested-by: ольга крыжановская <olga.kryzhanovska@gmail.com> Acked-by: Al Viro <viro@zeniv.linux.org.uk> Cc: stable@kernel.org # O_PATH introduced in 3.0+ Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-12-21vfs: fix user_statfs to retry once on ESTALE errorsJeff Layton1-1/+8
Signed-off-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-09-27switch simple cases of fget_light to fdgetAl Viro1-5/+4
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-05-30switch statfs to fget_light/fput_lightAl Viro1-2/+3
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-02-29fs: reduce the use of module.h wherever possiblePaul Gortmaker1-1/+1
For files only using THIS_MODULE and/or EXPORT_SYMBOL, map them onto including export.h -- or if the file isn't even using those, then just delete the include. Fix up any implicit include dependencies that were being masked by module.h along the way. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2012-01-04vfs: new helper - vfs_ustat()Al Viro1-8/+13
... and bury user_get_super()/statfs_by_dentry() - they are purely internal now. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2011-11-05VFS: fix statfs() automounter semantics regressionDan McGee1-1/+1
No one in their right mind would expect statfs() to not work on a automounter managed mount point. Fix it. [ I'm not sure about the "no one in their right mind" part. It's not mounted, and you didn't ask for it to be mounted. But nobody will really care, and this probably makes it match previous semantics, so.. - Linus ] This mirrors the fix made to the quota code in 815d405ceff0d69646. Signed-off-by: Dan McGee <dpmcgee@gmail.com> Cc: Trond Myklebust <Trond.Myklebust@netapp.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: stable@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-03-14clean statfs-like syscalls upAl Viro1-95/+81
New helpers: user_statfs() and fd_statfs(), taking userland pathname and descriptor resp. and filling struct kstatfs. Syscalls of statfs family (native, compat and foreign - osf and hpux on alpha and parisc resp.) switched to those. Removes some boilerplate code, simplifies cleanup on errors... Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2010-08-10add f_flags to struct statfs(64)Christoph Hellwig1-1/+46
Add a flags field to help glibc implementing statvfs(3) efficiently. We copy the flag values from glibc, and add a new ST_VALID flag to denote that f_flags is implemented. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2010-08-10pass a struct path to vfs_statfsChristoph Hellwig1-24/+26
We'll need the path to implement the flags field for statvfs support. We do have it available in all callers except: - ecryptfs_statfs. This one doesn't actually need vfs_statfs but just needs to do a caller to the lower filesystem statfs method. - sys_ustat. Add a non-exported statfs_by_dentry helper for it which doesn't won't be able to fill out the flags field later on. In addition rename the helpers for statfs vs fstatfs to do_*statfs instead of the misleading vfs prefix. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2010-05-22Take statfs variants to fs/statfs.cAl Viro1-0/+196
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>