summaryrefslogtreecommitdiff
path: root/fs/sysv
AgeCommit message (Collapse)AuthorFilesLines
2023-08-30Merge tag 'for-6.6/block-2023-08-28' of git://git.kernel.dk/linuxLinus Torvalds1-0/+1
Pull block updates from Jens Axboe: "Pretty quiet round for this release. This contains: - Add support for zoned storage to ublk (Andreas, Ming) - Series improving performance for drivers that mark themselves as needing a blocking context for issue (Bart) - Cleanup the flush logic (Chengming) - sed opal keyring support (Greg) - Fixes and improvements to the integrity support (Jinyoung) - Add some exports for bcachefs that we can hopefully delete again in the future (Kent) - deadline throttling fix (Zhiguo) - Series allowing building the kernel without buffer_head support (Christoph) - Sanitize the bio page adding flow (Christoph) - Write back cache fixes (Christoph) - MD updates via Song: - Fix perf regression for raid0 large sequential writes (Jan) - Fix split bio iostat for raid0 (David) - Various raid1 fixes (Heinz, Xueshi) - raid6test build fixes (WANG) - Deprecate bitmap file support (Christoph) - Fix deadlock with md sync thread (Yu) - Refactor md io accounting (Yu) - Various non-urgent fixes (Li, Yu, Jack) - Various fixes and cleanups (Arnd, Azeem, Chengming, Damien, Li, Ming, Nitesh, Ruan, Tejun, Thomas, Xu)" * tag 'for-6.6/block-2023-08-28' of git://git.kernel.dk/linux: (113 commits) block: use strscpy() to instead of strncpy() block: sed-opal: keyring support for SED keys block: sed-opal: Implement IOC_OPAL_REVERT_LSP block: sed-opal: Implement IOC_OPAL_DISCOVERY blk-mq: prealloc tags when increase tagset nr_hw_queues blk-mq: delete redundant tagset map update when fallback blk-mq: fix tags leak when shrink nr_hw_queues ublk: zoned: support REQ_OP_ZONE_RESET_ALL md: raid0: account for split bio in iostat accounting md/raid0: Fix performance regression for large sequential writes md/raid0: Factor out helper for mapping and submitting a bio md raid1: allow writebehind to work on any leg device set WriteMostly md/raid1: hold the barrier until handle_read_error() finishes md/raid1: free the r1bio before waiting for blocked rdev md/raid1: call free_r1bio() before allow_barrier() in raid_end_bio_io() blk-cgroup: Fix NULL deref caused by blkg_policy_data being installed before init drivers/rnbd: restore sysfs interface to rnbd-client md/raid5-cache: fix null-ptr-deref for r5l_flush_stripe_to_raid() raid6: test: only check for Altivec if building on powerpc hosts raid6: test: make sure all intermediate and artifact files are .gitignored ...
2023-08-09fs: pass the request_mask to generic_fillattrJeff Layton1-1/+2
generic_fillattr just fills in the entire stat struct indiscriminately today, copying data from the inode. There is at least one attribute (STATX_CHANGE_COOKIE) that can have side effects when it is reported, and we're looking at adding more with the addition of multigrain timestamps. Add a request_mask argument to generic_fillattr and have most callers just pass in the value that is passed to getattr. Have other callers (e.g. ksmbd) just pass in STATX_BASIC_STATS. Also move the setting of STATX_CHANGE_COOKIE into generic_fillattr. Acked-by: Joseph Qi <joseph.qi@linux.alibaba.com> Reviewed-by: Xiubo Li <xiubli@redhat.com> Reviewed-by: "Paulo Alcantara (SUSE)" <pc@manguebit.com> Reviewed-by: Jan Kara <jack@suse.cz> Signed-off-by: Jeff Layton <jlayton@kernel.org> Message-Id: <20230807-mgctime-v7-2-d1dec143a704@kernel.org> Signed-off-by: Christian Brauner <brauner@kernel.org>
2023-08-02fs: add CONFIG_BUFFER_HEADChristoph Hellwig1-0/+1
Add a new config option that controls building the buffer_head code, and select it from all file systems and stacking drivers that need it. For the block device nodes and alternative iomap based buffered I/O path is provided when buffer_head support is not enabled, and iomap needs a a small tweak to define the IOMAP_F_BUFFER_HEAD flag to 0 to not call into the buffer_head code when it doesn't exist. Otherwise this is just Kconfig and ifdef changes. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Luis Chamberlain <mcgrof@kernel.org> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Link: https://lore.kernel.org/r/20230801172201.1923299-7-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-07-24sysv: convert to ctime accessor functionsJeff Layton5-12/+11
In later patches, we're going to change how the inode's ctime field is used. Switch to using accessor functions instead of raw accesses of inode->i_ctime. Signed-off-by: Jeff Layton <jlayton@kernel.org> Reviewed-by: Jan Kara <jack@suse.cz> Message-Id: <20230705190309.579783-74-jlayton@kernel.org> Signed-off-by: Christian Brauner <brauner@kernel.org>
2023-06-26Merge tag 'for-6.5/splice-2023-06-23' of git://git.kernel.dk/linuxLinus Torvalds1-1/+1
Pull splice updates from Jens Axboe: "This kills off ITER_PIPE to avoid a race between truncate, iov_iter_revert() on the pipe and an as-yet incomplete DMA to a bio with unpinned/unref'ed pages from an O_DIRECT splice read. This causes memory corruption. Instead, we either use (a) filemap_splice_read(), which invokes the buffered file reading code and splices from the pagecache into the pipe; (b) copy_splice_read(), which bulk-allocates a buffer, reads into it and then pushes the filled pages into the pipe; or (c) handle it in filesystem-specific code. Summary: - Rename direct_splice_read() to copy_splice_read() - Simplify the calculations for the number of pages to be reclaimed in copy_splice_read() - Turn do_splice_to() into a helper, vfs_splice_read(), so that it can be used by overlayfs and coda to perform the checks on the lower fs - Make vfs_splice_read() jump to copy_splice_read() to handle direct-I/O and DAX - Provide shmem with its own splice_read to handle non-existent pages in the pagecache. We don't want a ->read_folio() as we don't want to populate holes, but filemap_get_pages() requires it - Provide overlayfs with its own splice_read to call down to a lower layer as overlayfs doesn't provide ->read_folio() - Provide coda with its own splice_read to call down to a lower layer as coda doesn't provide ->read_folio() - Direct ->splice_read to copy_splice_read() in tty, procfs, kernfs and random files as they just copy to the output buffer and don't splice pages - Provide wrappers for afs, ceph, ecryptfs, ext4, f2fs, nfs, ntfs3, ocfs2, orangefs, xfs and zonefs to do locking and/or revalidation - Make cifs use filemap_splice_read() - Replace pointers to generic_file_splice_read() with pointers to filemap_splice_read() as DIO and DAX are handled in the caller; filesystems can still provide their own alternate ->splice_read() op - Remove generic_file_splice_read() - Remove ITER_PIPE and its paraphernalia as generic_file_splice_read was the only user" * tag 'for-6.5/splice-2023-06-23' of git://git.kernel.dk/linux: (31 commits) splice: kdoc for filemap_splice_read() and copy_splice_read() iov_iter: Kill ITER_PIPE splice: Remove generic_file_splice_read() splice: Use filemap_splice_read() instead of generic_file_splice_read() cifs: Use filemap_splice_read() trace: Convert trace/seq to use copy_splice_read() zonefs: Provide a splice-read wrapper xfs: Provide a splice-read wrapper orangefs: Provide a splice-read wrapper ocfs2: Provide a splice-read wrapper ntfs3: Provide a splice-read wrapper nfs: Provide a splice-read wrapper f2fs: Provide a splice-read wrapper ext4: Provide a splice-read wrapper ecryptfs: Provide a splice-read wrapper ceph: Provide a splice-read wrapper afs: Provide a splice-read wrapper 9p: Add splice_read wrapper net: Make sock_splice_read() use copy_splice_read() by default tty, proc, kernfs, random: Use copy_splice_read() ...
2023-06-05highmem: Rename put_and_unmap_page() to unmap_and_put_page()Fabio M. De Francesco2-15/+15
With commit 849ad04cf562a ("new helper: put_and_unmap_page()"), Al Viro introduced the put_and_unmap_page() to use in those many places where we have a common pattern consisting of calls to kunmap_local() + put_page(). Obviously, first we unmap and then we put pages. Instead, the original name of this helper seems to imply that we first put and then unmap. Therefore, rename the helper and change the only known upstreamed user (i.e., fs/sysv) before this helper enters common use and might become difficult to find all call sites and instead easy to break the builds. Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Fabio M. De Francesco <fmdefrancesco@gmail.com> Reviewed-by: Eric Biggers <ebiggers@google.com> Message-Id: <20230602103307.5637-1-fmdefrancesco@gmail.com> Signed-off-by: Christian Brauner <brauner@kernel.org>
2023-06-01fs/sysv: Null check to prevent null-ptr-deref bugPrince Kumar Maurya1-0/+4
sb_getblk(inode->i_sb, parent) return a null ptr and taking lock on that leads to the null-ptr-deref bug. Reported-by: syzbot+aad58150cbc64ba41bdc@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=aad58150cbc64ba41bdc Signed-off-by: Prince Kumar Maurya <princekumarmaurya06@gmail.com> Message-Id: <20230531013141.19487-1-princekumarmaurya06@gmail.com> Signed-off-by: Christian Brauner <brauner@kernel.org>
2023-05-24splice: Use filemap_splice_read() instead of generic_file_splice_read()David Howells1-1/+1
Replace pointers to generic_file_splice_read() with calls to filemap_splice_read(). Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Christian Brauner <brauner@kernel.org> cc: Jens Axboe <axboe@kernel.dk> cc: Al Viro <viro@zeniv.linux.org.uk> cc: David Hildenbrand <david@redhat.com> cc: John Hubbard <jhubbard@nvidia.com> cc: linux-mm@kvack.org cc: linux-block@vger.kernel.org cc: linux-fsdevel@vger.kernel.org Link: https://lore.kernel.org/r/20230522135018.2742245-29-dhowells@redhat.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-03-13sysv: switch to put_and_unmap_page()Al Viro3-22/+15
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2023-03-13fs/sysv: Don't round down address for kunmap_flush_on_unmap()Fabio M. De Francesco1-1/+1
The kernel virtual address passed to kunmap_flush_on_unmap() has no more any need to be rounded down. Therefore, delete the rounding down of "page_addr" when passed to kunmap_local() in dir_put_page(). Don't backport without commit 88d7b12068b9 ("highmem: round down the address passed to kunmap_flush_on_unmap()"). Cc: Ira Weiny <ira.weiny@intel.com> Suggested-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Fabio M. De Francesco <fmdefrancesco@gmail.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2023-02-25Merge branch 'work.sysv' of ↵Linus Torvalds3-88/+111
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull sysv updates from Al Viro: "Fabio's 'switch to kmap_local_page()' patchset (originally after the ext2 counterpart, with a lot of cleaning up done to it; as the matter of fact, ext2 side is in need of similar cleanups - calling conventions there are bloody awful). Plus the equivalents of minix stuff..." * 'work.sysv' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: sysv: fix handling of delete_entry and set_link failures fs/sysv: Replace kmap() with kmap_local_page() fs/sysv: Use dir_put_page() in sysv_rename() fs/sysv: Change the signature of dir_get_page() fs/sysv: Use the offset_in_page() helper sysv: don't flush page immediately for DIRSYNC directories
2023-01-20sysv: fix handling of delete_entry and set_link failuresAl Viro3-21/+30
similar to minixfs series - make sysv_set_link() report failures, lift dir_put_page() into the callers of sysv_set_link() and sysv_delete_entry(), make sysv_rename() handle failures in both. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2023-01-20fs/sysv: Replace kmap() with kmap_local_page()Fabio M. De Francesco3-23/+39
kmap() is being deprecated in favor of kmap_local_page(). There are two main problems with kmap(): (1) It comes with an overhead as the mapping space is restricted and protected by a global lock for synchronization and (2) it also requires global TLB invalidation when the kmap’s pool wraps and it might block when the mapping space is fully utilized until a slot becomes available. With kmap_local_page() the mappings are per thread, CPU local, can take page faults, and can be called from any context (including interrupts). It is faster than kmap() in kernels with HIGHMEM enabled. Furthermore, the tasks can be preempted and, when they are scheduled to run again, the kernel virtual addresses are restored and still valid. Since kmap_local_page() would not break the strict rules of local mappings (i.e., the thread locality and the stack based nesting), this function can be easily and safely replace the deprecated API. Therefore, replace kmap() with kmap_local_page() in fs/sysv. kunmap_local() requires the mapping address, so return that address from dir_get_page() to be used in dir_put_page(). Suggested-by: Al Viro <viro@zeniv.linux.org.uk> Suggested-by: Ira Weiny <ira.weiny@intel.com> Signed-off-by: Fabio M. De Francesco <fmdefrancesco@gmail.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2023-01-20fs/sysv: Use dir_put_page() in sysv_rename()Fabio M. De Francesco3-7/+5
Use the dir_put_page() helper in sysv_rename() instead of open-coding two kunmap() + put_page(). Cc: Al Viro <viro@zeniv.linux.org.uk> Suggested-by: Ira Weiny <ira.weiny@intel.com> Signed-off-by: Fabio M. De Francesco <fmdefrancesco@gmail.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2023-01-20fs/sysv: Change the signature of dir_get_page()Fabio M. De Francesco1-29/+24
Change the signature of dir_get_page() in order to prepare this function to the conversion to the use of kmap_local_page(). Change also those call sites which are required to adjust to the new signature. Cc: Ira Weiny <ira.weiny@intel.com> Suggested-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Fabio M. De Francesco <fmdefrancesco@gmail.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2023-01-20fs/sysv: Use the offset_in_page() helperFabio M. De Francesco1-6/+3
Use the offset_in_page() helper because it is more suitable than doing explicit subtractions between pointers to directory entries and kernel virtual addresses of mapped pages. Cc: Ira Weiny <ira.weiny@intel.com> Suggested-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Fabio M. De Francesco <fmdefrancesco@gmail.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2023-01-20sysv: don't flush page immediately for DIRSYNC directoriesChristoph Hellwig1-11/+19
We do not need to writeout modified directory blocks immediately when modifying them while the page is locked. It is enough to do the flush somewhat later which has the added benefit that inode times can be flushed as well. It also allows us to stop depending on write_one_page() function. Ported from an ext2 patch by Jan Kara. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2023-01-19fs: port inode_init_owner() to mnt_idmapChristian Brauner1-1/+1
Convert to struct mnt_idmap. Last cycle we merged the necessary infrastructure in 256c8aed2b42 ("fs: introduce dedicated idmap type for mounts"). This is just the conversion to struct mnt_idmap. Currently we still pass around the plain namespace that was attached to a mount. This is in general pretty convenient but it makes it easy to conflate namespaces that are relevant on the filesystem with namespaces that are relevent on the mount level. Especially for non-vfs developers without detailed knowledge in this area this can be a potential source for bugs. Once the conversion to struct mnt_idmap is done all helpers down to the really low-level helpers will take a struct mnt_idmap argument instead of two namespace arguments. This way it becomes impossible to conflate the two eliminating the possibility of any bugs. All of the vfs and all filesystems only operate on struct mnt_idmap. Acked-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>
2023-01-19fs: port ->rename() to pass mnt_idmapChristian Brauner1-1/+1
Convert to struct mnt_idmap. Last cycle we merged the necessary infrastructure in 256c8aed2b42 ("fs: introduce dedicated idmap type for mounts"). This is just the conversion to struct mnt_idmap. Currently we still pass around the plain namespace that was attached to a mount. This is in general pretty convenient but it makes it easy to conflate namespaces that are relevant on the filesystem with namespaces that are relevent on the mount level. Especially for non-vfs developers without detailed knowledge in this area this can be a potential source for bugs. Once the conversion to struct mnt_idmap is done all helpers down to the really low-level helpers will take a struct mnt_idmap argument instead of two namespace arguments. This way it becomes impossible to conflate the two eliminating the possibility of any bugs. All of the vfs and all filesystems only operate on struct mnt_idmap. Acked-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>
2023-01-19fs: port ->mknod() to pass mnt_idmapChristian Brauner1-2/+2
Convert to struct mnt_idmap. Last cycle we merged the necessary infrastructure in 256c8aed2b42 ("fs: introduce dedicated idmap type for mounts"). This is just the conversion to struct mnt_idmap. Currently we still pass around the plain namespace that was attached to a mount. This is in general pretty convenient but it makes it easy to conflate namespaces that are relevant on the filesystem with namespaces that are relevent on the mount level. Especially for non-vfs developers without detailed knowledge in this area this can be a potential source for bugs. Once the conversion to struct mnt_idmap is done all helpers down to the really low-level helpers will take a struct mnt_idmap argument instead of two namespace arguments. This way it becomes impossible to conflate the two eliminating the possibility of any bugs. All of the vfs and all filesystems only operate on struct mnt_idmap. Acked-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>
2023-01-19fs: port ->mkdir() to pass mnt_idmapChristian Brauner1-1/+1
Convert to struct mnt_idmap. Last cycle we merged the necessary infrastructure in 256c8aed2b42 ("fs: introduce dedicated idmap type for mounts"). This is just the conversion to struct mnt_idmap. Currently we still pass around the plain namespace that was attached to a mount. This is in general pretty convenient but it makes it easy to conflate namespaces that are relevant on the filesystem with namespaces that are relevent on the mount level. Especially for non-vfs developers without detailed knowledge in this area this can be a potential source for bugs. Once the conversion to struct mnt_idmap is done all helpers down to the really low-level helpers will take a struct mnt_idmap argument instead of two namespace arguments. This way it becomes impossible to conflate the two eliminating the possibility of any bugs. All of the vfs and all filesystems only operate on struct mnt_idmap. Acked-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>
2023-01-19fs: port ->symlink() to pass mnt_idmapChristian Brauner1-1/+1
Convert to struct mnt_idmap. Last cycle we merged the necessary infrastructure in 256c8aed2b42 ("fs: introduce dedicated idmap type for mounts"). This is just the conversion to struct mnt_idmap. Currently we still pass around the plain namespace that was attached to a mount. This is in general pretty convenient but it makes it easy to conflate namespaces that are relevant on the filesystem with namespaces that are relevent on the mount level. Especially for non-vfs developers without detailed knowledge in this area this can be a potential source for bugs. Once the conversion to struct mnt_idmap is done all helpers down to the really low-level helpers will take a struct mnt_idmap argument instead of two namespace arguments. This way it becomes impossible to conflate the two eliminating the possibility of any bugs. All of the vfs and all filesystems only operate on struct mnt_idmap. Acked-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>
2023-01-19fs: port ->create() to pass mnt_idmapChristian Brauner1-1/+1
Convert to struct mnt_idmap. Last cycle we merged the necessary infrastructure in 256c8aed2b42 ("fs: introduce dedicated idmap type for mounts"). This is just the conversion to struct mnt_idmap. Currently we still pass around the plain namespace that was attached to a mount. This is in general pretty convenient but it makes it easy to conflate namespaces that are relevant on the filesystem with namespaces that are relevent on the mount level. Especially for non-vfs developers without detailed knowledge in this area this can be a potential source for bugs. Once the conversion to struct mnt_idmap is done all helpers down to the really low-level helpers will take a struct mnt_idmap argument instead of two namespace arguments. This way it becomes impossible to conflate the two eliminating the possibility of any bugs. All of the vfs and all filesystems only operate on struct mnt_idmap. Acked-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>
2023-01-19fs: port ->getattr() to pass mnt_idmapChristian Brauner2-3/+3
Convert to struct mnt_idmap. Last cycle we merged the necessary infrastructure in 256c8aed2b42 ("fs: introduce dedicated idmap type for mounts"). This is just the conversion to struct mnt_idmap. Currently we still pass around the plain namespace that was attached to a mount. This is in general pretty convenient but it makes it easy to conflate namespaces that are relevant on the filesystem with namespaces that are relevent on the mount level. Especially for non-vfs developers without detailed knowledge in this area this can be a potential source for bugs. Once the conversion to struct mnt_idmap is done all helpers down to the really low-level helpers will take a struct mnt_idmap argument instead of two namespace arguments. This way it becomes impossible to conflate the two eliminating the possibility of any bugs. All of the vfs and all filesystems only operate on struct mnt_idmap. Acked-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>
2023-01-19fs: port ->setattr() to pass mnt_idmapChristian Brauner1-3/+3
Convert to struct mnt_idmap. Last cycle we merged the necessary infrastructure in 256c8aed2b42 ("fs: introduce dedicated idmap type for mounts"). This is just the conversion to struct mnt_idmap. Currently we still pass around the plain namespace that was attached to a mount. This is in general pretty convenient but it makes it easy to conflate namespaces that are relevant on the filesystem with namespaces that are relevent on the mount level. Especially for non-vfs developers without detailed knowledge in this area this can be a potential source for bugs. Once the conversion to struct mnt_idmap is done all helpers down to the really low-level helpers will take a struct mnt_idmap argument instead of two namespace arguments. This way it becomes impossible to conflate the two eliminating the possibility of any bugs. All of the vfs and all filesystems only operate on struct mnt_idmap. Acked-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>
2022-12-10fs: sysv: Fix sysv_nblocks() returns wrong valueChen Zhongjin1-1/+1
sysv_nblocks() returns 'blocks' rather than 'res', which only counting the number of triple-indirect blocks and causing sysv_getattr() gets a wrong result. [AV: this is actually a sysv counterpart of minixfs fix - 0fcd426de9d0 "[PATCH] minix block usage counting fix" in historical tree; mea culpa, should've thought to check fs/sysv back then...] Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Chen Zhongjin <chenzhongjin@huawei.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2022-05-27Merge tag 'mm-nonmm-stable-2022-05-26' of ↵Linus Torvalds1-1/+3
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm Pull misc updates from Andrew Morton: "The non-MM patch queue for this merge window. Not a lot of material this cycle. Many singleton patches against various subsystems. Most notably some maintenance work in ocfs2 and initramfs" * tag 'mm-nonmm-stable-2022-05-26' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (65 commits) kcov: update pos before writing pc in trace function ocfs2: dlmfs: fix error handling of user_dlm_destroy_lock ocfs2: dlmfs: don't clear USER_LOCK_ATTACHED when destroying lock fs/ntfs: remove redundant variable idx fat: remove time truncations in vfat_create/vfat_mkdir fat: report creation time in statx fat: ignore ctime updates, and keep ctime identical to mtime in memory fat: split fat_truncate_time() into separate functions MAINTAINERS: add Muchun as a memcg reviewer proc/sysctl: make protected_* world readable ia64: mca: drop redundant spinlock initialization tty: fix deadlock caused by calling printk() under tty_port->lock relay: remove redundant assignment to pointer buf fs/ntfs3: validate BOOT sectors_per_clusters lib/string_helpers: fix not adding strarray to device's resource list kernel/crash_core.c: remove redundant check of ck_cmdline ELF, uapi: fixup ELF_ST_TYPE definition ipc/mqueue: use get_tree_nodev() in mqueue_get_tree() ipc: update semtimedop() to use hrtimer ipc/sem: remove redundant assignments ...
2022-05-09fs: Convert block_read_full_page() to block_read_full_folio()Matthew Wilcox (Oracle)1-3/+3
This function is NOT converted to handle large folios, so include an assert that the filesystem isn't passing one in. Otherwise, use the folio functions instead of the page functions, where they exist. Convert all filesystems which use block_read_full_page(). Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
2022-05-08fs: Remove flags parameter from aops->write_beginMatthew Wilcox (Oracle)1-1/+1
There are no more aop flags left, so remove the parameter. Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Reviewed-by: Christoph Hellwig <hch@lst.de>
2022-05-08fs: Remove aop flags parameter from block_write_begin()Matthew Wilcox (Oracle)1-1/+1
There are no more aop flags left, so remove the parameter. Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Reviewed-by: Christoph Hellwig <hch@lst.de>
2022-04-30fs: sysv: check sbi->s_firstdatazone in complete_read_superLiu Shixin1-1/+3
sbi->s_firstinodezone is initialized to 2 and sbi->s_firstdatazone is read from sbd. There's no guarantee that sbi->s_firstdatazone must bigger than sbi->s_firstinodezone. If sbi->s_firstdatazone less than 2, the filesystem can still be mounted unexpetly. At this point, sbi->s_ninodes flip to very large value and this filesystem is broken. We can observe this by executing 'df' command. When we execute, we will get an error message: "sysv_count_free_inodes: unable to read inode table" Link: https://lkml.kernel.org/r/20220330104215.530223-1-liushixin2@huawei.com Signed-off-by: Liu Shixin <liushixin2@huawei.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-03-23Merge tag 'folio-5.18b' of git://git.infradead.org/users/willy/pagecacheLinus Torvalds1-1/+2
Pull filesystem folio updates from Matthew Wilcox: "Primarily this series converts some of the address_space operations to take a folio instead of a page. Notably: - a_ops->is_partially_uptodate() takes a folio instead of a page and changes the type of the 'from' and 'count' arguments to make it obvious they're bytes. - a_ops->invalidatepage() becomes ->invalidate_folio() and has a similar type change. - a_ops->launder_page() becomes ->launder_folio() - a_ops->set_page_dirty() becomes ->dirty_folio() and adds the address_space as an argument. There are a couple of other misc changes up front that weren't worth separating into their own pull request" * tag 'folio-5.18b' of git://git.infradead.org/users/willy/pagecache: (53 commits) fs: Remove aops ->set_page_dirty fb_defio: Use noop_dirty_folio() fs: Convert __set_page_dirty_no_writeback to noop_dirty_folio fs: Convert __set_page_dirty_buffers to block_dirty_folio nilfs: Convert nilfs_set_page_dirty() to nilfs_dirty_folio() mm: Convert swap_set_page_dirty() to swap_dirty_folio() ubifs: Convert ubifs_set_page_dirty to ubifs_dirty_folio f2fs: Convert f2fs_set_node_page_dirty to f2fs_dirty_node_folio f2fs: Convert f2fs_set_data_page_dirty to f2fs_dirty_data_folio f2fs: Convert f2fs_set_meta_page_dirty to f2fs_dirty_meta_folio afs: Convert afs_dir_set_page_dirty() to afs_dir_dirty_folio() btrfs: Convert extent_range_redirty_for_io() to use folios fs: Convert trivial uses of __set_page_dirty_nobuffers to filemap_dirty_folio btrfs: Convert from set_page_dirty to dirty_folio fscache: Convert fscache_set_page_dirty() to fscache_dirty_folio() fs: Add aops->dirty_folio fs: Remove aops->launder_page orangefs: Convert launder_page to launder_folio nfs: Convert from launder_page to launder_folio fuse: Convert from launder_page to launder_folio ...
2022-03-23fs: allocate inode by using alloc_inode_sb()Muchun Song1-1/+1
The inode allocation is supposed to use alloc_inode_sb(), so convert kmem_cache_alloc() of all filesystems to alloc_inode_sb(). Link: https://lkml.kernel.org/r/20220228122126.37293-5-songmuchun@bytedance.com Signed-off-by: Muchun Song <songmuchun@bytedance.com> Acked-by: Theodore Ts'o <tytso@mit.edu> [ext4] Acked-by: Roman Gushchin <roman.gushchin@linux.dev> Cc: Alex Shi <alexs@kernel.org> Cc: Anna Schumaker <Anna.Schumaker@Netapp.com> Cc: Chao Yu <chao@kernel.org> Cc: Dave Chinner <david@fromorbit.com> Cc: Fam Zheng <fam.zheng@bytedance.com> Cc: Jaegeuk Kim <jaegeuk@kernel.org> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Kari Argillander <kari.argillander@gmail.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Michal Hocko <mhocko@kernel.org> Cc: Qi Zheng <zhengqi.arch@bytedance.com> Cc: Shakeel Butt <shakeelb@google.com> Cc: Trond Myklebust <trond.myklebust@hammerspace.com> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Wei Yang <richard.weiyang@gmail.com> Cc: Xiongchun Duan <duanxiongchun@bytedance.com> Cc: Yang Shi <shy828301@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-03-16fs: Convert __set_page_dirty_buffers to block_dirty_folioMatthew Wilcox (Oracle)1-1/+1
Convert all callers; mostly this is just changing the aops to point at it, but a few implementations need a little more work. Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Tested-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Acked-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Tested-by: Mike Marshall <hubcap@omnibond.com> # orangefs Tested-by: David Howells <dhowells@redhat.com> # afs
2022-03-15fs: Turn block_invalidatepage into block_invalidate_folioMatthew Wilcox (Oracle)1-0/+1
Remove special-casing of a NULL invalidatepage, since there is no more block_invalidatepage. Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Tested-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Acked-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Tested-by: Mike Marshall <hubcap@omnibond.com> # orangefs Tested-by: David Howells <dhowells@redhat.com> # afs
2021-11-09sysv: use BUILD_BUG_ON instead of runtime checkPavel Skripkin1-4/+2
There were runtime checks about sizes of struct v7_super_block and struct sysv_inode. If one of these checks fail the kernel will panic. Since these values are known at compile time let's use BUILD_BUG_ON(), because it's a standard mechanism for validation checking at build time Link: https://lkml.kernel.org/r/20210813123020.22971-1-paskripkin@gmail.com Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Pavel Skripkin <paskripkin@gmail.com> Cc: Christoph Hellwig <hch@lst.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-06-29mm: require ->set_page_dirty to be explicitly wired upChristoph Hellwig1-0/+1
Remove the CONFIG_BLOCK default to __set_page_dirty_buffers and just wire that method up for the missing instances. [hch@lst.de: ecryptfs: add a ->set_page_dirty cludge] Link: https://lkml.kernel.org/r/20210624125250.536369-1-hch@lst.de Link: https://lkml.kernel.org/r/20210614061512.3966143-4-hch@lst.de Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by: Jan Kara <jack@suse.cz> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Tyler Hicks <code@tyhicks.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-01-24fs: make helpers idmap mount awareChristian Brauner4-13/+18
Extend some inode methods with an additional user namespace argument. A filesystem that is aware of idmapped mounts will receive the user namespace the mount has been marked with. This can be used for additional permission checking and also to enable filesystems to translate between uids and gids if they need to. We have implemented all relevant helpers in earlier patches. As requested we simply extend the exisiting inode method instead of introducing new ones. This is a little more code churn but it's mostly mechanical and doesnt't leave us with additional inode methods. Link: https://lore.kernel.org/r/20210121131959.646623-25-christian.brauner@ubuntu.com Cc: Christoph Hellwig <hch@lst.de> Cc: David Howells <dhowells@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: linux-fsdevel@vger.kernel.org Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
2021-01-24stat: handle idmapped mountsChristian Brauner1-1/+1
The generic_fillattr() helper fills in the basic attributes associated with an inode. Enable it to handle idmapped mounts. If the inode is accessed through an idmapped mount map it into the mount's user namespace before we store the uid and gid. If the initial user namespace is passed nothing changes so non-idmapped mounts will see identical behavior as before. Link: https://lore.kernel.org/r/20210121131959.646623-12-christian.brauner@ubuntu.com Cc: Christoph Hellwig <hch@lst.de> Cc: David Howells <dhowells@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: linux-fsdevel@vger.kernel.org Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: James Morris <jamorris@linux.microsoft.com> Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
2021-01-24attr: handle idmapped mountsChristian Brauner1-2/+2
When file attributes are changed most filesystems rely on the setattr_prepare(), setattr_copy(), and notify_change() helpers for initialization and permission checking. Let them handle idmapped mounts. If the inode is accessed through an idmapped mount map it into the mount's user namespace. Afterwards the checks are identical to non-idmapped mounts. If the initial user namespace is passed nothing changes so non-idmapped mounts will see identical behavior as before. Helpers that perform checks on the ia_uid and ia_gid fields in struct iattr assume that ia_uid and ia_gid are intended values and have already been mapped correctly at the userspace-kernelspace boundary as we already do today. If the initial user namespace is passed nothing changes so non-idmapped mounts will see identical behavior as before. Link: https://lore.kernel.org/r/20210121131959.646623-8-christian.brauner@ubuntu.com Cc: Christoph Hellwig <hch@lst.de> Cc: David Howells <dhowells@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: linux-fsdevel@vger.kernel.org Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
2021-01-24inode: make init and permission helpers idmapped mount awareChristian Brauner1-1/+1
The inode_owner_or_capable() helper determines whether the caller is the owner of the inode or is capable with respect to that inode. Allow it to handle idmapped mounts. If the inode is accessed through an idmapped mount it according to the mount's user namespace. Afterwards the checks are identical to non-idmapped mounts. If the initial user namespace is passed nothing changes so non-idmapped mounts will see identical behavior as before. Similarly, allow the inode_init_owner() helper to handle idmapped mounts. It initializes a new inode on idmapped mounts by mapping the fsuid and fsgid of the caller from the mount's user namespace. If the initial user namespace is passed nothing changes so non-idmapped mounts will see identical behavior as before. Link: https://lore.kernel.org/r/20210121131959.646623-7-christian.brauner@ubuntu.com Cc: Christoph Hellwig <hch@lst.de> Cc: David Howells <dhowells@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: linux-fsdevel@vger.kernel.org Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: James Morris <jamorris@linux.microsoft.com> Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
2020-09-18[PATCH] reduce boilerplate in fsid handlingAl Viro1-2/+1
Get rid of boilerplate in most of ->statfs() instances... Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2020-04-21docs: filesystems: fix renamed referencesMauro Carvalho Chehab1-1/+1
Some filesystem references got broken by a previous patch series I submitted. Address those. Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Acked-by: David Sterba <dsterba@suse.com> # fs/affs/Kconfig Link: https://lore.kernel.org/r/57318c53008dbda7f6f4a5a9e5787f4d37e8565a.1586881715.git.mchehab+huawei@kernel.org Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2019-08-30fs: sysv: Initialize filesystem timestamp rangesDeepa Dinamani1-1/+4
Fill in the appropriate limits to avoid inconsistencies in the vfs cached inode times when timestamps are outside the permitted range. Signed-off-by: Deepa Dinamani <deepa.kernel@gmail.com> Acked-by: Jeff Layton <jlayton@kernel.org> Cc: hch@infradead.org
2019-05-21treewide: Add SPDX license identifier - Makefile/KconfigThomas Gleixner2-0/+2
Add SPDX license identifiers to all Make/Kconfig files which: - Have no license information of any form These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0-only Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-21treewide: Add SPDX license identifier for more missed filesThomas Gleixner1-0/+1
Add SPDX license identifiers to all files which: - Have no license information of any form - Have MODULE_LICENCE("GPL*") inside which was used in the initial scan/conversion to ignore the file These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0-only Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-08Merge branch 'work.dcache' of ↵Linus Torvalds3-21/+0
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull misc dcache updates from Al Viro: "Most of this pile is putting name length into struct name_snapshot and making use of it. The beginning of this series ("ovl_lookup_real_one(): don't bother with strlen()") ought to have been split in two (separate switch of name_snapshot to struct qstr from overlayfs reaping the trivial benefits of that), but I wanted to avoid a rebase - by the time I'd spotted that it was (a) in -next and (b) close to 5.1-final ;-/" * 'work.dcache' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: audit_compare_dname_path(): switch to const struct qstr * audit_update_watch(): switch to const struct qstr * inotify_handle_event(): don't bother with strlen() fsnotify: switch send_to_group() and ->handle_event to const struct qstr * fsnotify(): switch to passing const struct qstr * for file_name switch fsnotify_move() to passing const struct qstr * for old_name ovl_lookup_real_one(): don't bother with strlen() sysv: bury the broken "quietly truncate the long filenames" logics nsfs: unobfuscate unexport d_alloc_pseudo()
2019-05-02sysv: switch to ->free_inode()Al Viro1-8/+2
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2019-04-10sysv: bury the broken "quietly truncate the long filenames" logicsAl Viro3-21/+0
It's contrary to the normal semantics, only sysv and adfs try to do that (on any other filesystem you'll get -ENAMETOOLONG instead of quiet truncation) and nobody actually uses that - it got accidentally broken 5 years ago and nobody noticed. Time to bury it... Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2018-11-10sysv: return 'err' instead of 0 in __sysv_write_inodeYueHaibing1-1/+1
Fixes gcc '-Wunused-but-set-variable' warning: fs/sysv/inode.c: In function '__sysv_write_inode': fs/sysv/inode.c:239:6: warning: variable 'err' set but not used [-Wunused-but-set-variable] __sysv_write_inode should return 'err' instead of 0 Fixes: 05459ca81ac3 ("repair sysv_write_inode(), switch sysv to simple_fsync()") Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>