| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
We only have one caller left, and open coding the simple extent list
lookup in it allows us to make the code both more understandable and
reuse calculations and variables already present.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
|
|
xfs_writepage_map() iterates over the bufferheads on a page to decide
what sort of IO to do and what actions to take. However, when it comes
to reflink and deciding when it needs to execute a COW operation, we no
longer look at the bufferhead state but instead we ignore than and look
up internal state held in the COW fork extent list.
This means xfs_writepage_map() is somewhat confused. It does stuff, then
ignores it, then tries to handle the impedence mismatch by shovelling the
results inside the existing mapping code. It works, but it's a bit of a
mess and it makes it hard to fix the cached map bug that the writepage
code currently has.
To unify the two different mechanisms, we first have to choose a direction.
That's already been set - we're de-emphasising bufferheads so they are no
longer a control structure as we need to do taht to allow for eventual
removal. Hence we need to move away from looking at bufferhead state to
determine what operations we need to perform.
We can't completely get rid of bufferheads yet - they do contain some
state that is absolutely necessary, such as whether that part of the page
contains valid data or not (buffer_uptodate()). Other state in the
bufferhead is redundant:
BH_dirty - the page is dirty, so we can ignore this and just
write it
BH_delay - we have delalloc extent info in the DATA fork extent
tree
BH_unwritten - same as BH_delay
BH_mapped - indicates we've already used it once for IO and it is
mapped to a disk address. Needs to be ignored for COW
blocks.
The BH_mapped flag is an interesting case - it's supposed to indicate that
it's already mapped to disk and so we can just use it "as is". In theory,
we don't even have to do an extent lookup to find where to write it too,
but we have to do that anyway to determine we are actually writing over a
valid extent. Hence it's not even serving the purpose of avoiding a an
extent lookup during writeback, and so we can pretty much ignore it.
Especially as we have to ignore it for COW operations...
Therefore, use the extent map as the source of information to tell us
what actions we need to take and what sort of IO we should perform. The
first step is to have xfs_map_blocks() set the io type according to what
it looks up. This means it can easily handle both normal overwrite and
COW cases. The only thing we also need to add is the ability to return
hole mappings.
We need to return and cache hole mappings now for the case of multiple
blocks per page. We no longer use the BH_mapped to indicate a block over
a hole, so we have to get that info from xfs_map_blocks(). We cache it so
that holes that span two pages don't need separate lookups. This allows us
to avoid ever doing write IO over a hole, too.
Now that we have xfs_map_blocks() returning both a cached map and the type
of IO we need to perform, we can rewrite xfs_writepage_map() to drop all
the bufferhead control. It's also much simplified because it doesn't need
to explicitly handle COW operations. Instead of iterating bufferheads, it
iterates blocks within the page and then looks up what per-block state is
required from the appropriate bufferhead. It then validates the cached
map, and if it's not valid, we get a new map. If we don't get a valid map
or it's over a hole, we skip the block.
At this point, we have to remap the bufferhead via xfs_map_at_offset().
As previously noted, we had to do this even if the buffer was already
mapped as the mapping would be stale for XFS_IO_DELALLOC, XFS_IO_UNWRITTEN
and XFS_IO_COW IO types. With xfs_map_blocks() now controlling the type,
even XFS_IO_OVERWRITE types need remapping, as converted-but-not-yet-
written delalloc extents beyond EOF can be reported at XFS_IO_OVERWRITE.
Bufferheads that span such regions still need their BH_Delay flags cleared
and their block numbers calculated, so we now unconditionally map each
bufferhead before submission.
But wait! There's more - remember the old "treat unwritten extents as
holes on read" hack? Yeah, that means we can have a dirty page with
unmapped, unwritten bufferheads that contain data! What makes these so
special is that the unwritten "hole" bufferheads do not have a valid block
device pointer, so if we attempt to write them xfs_add_to_ioend() blows
up. So we make xfs_map_at_offset() do the "realtime or data device"
lookup from the inode and ignore what was or wasn't put into the
bufferhead when the buffer was instantiated.
The astute reader will have realised by now that this code treats
unwritten extents in multiple-blocks-per-page situations differently.
If we get any combination of unwritten blocks on a dirty page that contain
valid data in the page, we're going to convert them to real extents. This
can actually be a win, because it means that pages with interleaving
unwritten and written blocks will get converted to a single written extent
with zeros replacing the interspersed unwritten blocks. This is actually
good for reducing extent list and conversion overhead, and it means we
issue a contiguous IO instead of lots of little ones. The downside is
that we use up a little extra IO bandwidth. Neither of these seem like a
bad thing given that spinning disks are seek sensitive, and SSDs/pmem have
bandwidth to burn and the lower Io latency/CPU overhead of fewer, larger
IOs will result in better performance on them...
As a result of all this, the only state we actually care about from the
bufferhead is a single flag - BH_Uptodate. We still use the bufferhead to
pass some information to the bio via xfs_add_to_ioend(), but that is
trivial to separate and pass explicitly. This means we really only need
1 bit of state per block per page from the buffered write path in the
writeback path. Everything else we do with the bufferhead is purely to
make the buffered IO front end continue to work correctly. i.e we've
pretty much marginalised bufferheads in the writeback path completely.
Signed-off-By: Dave Chinner <dchinner@redhat.com>
[hch: forward port, refactor and split off bits into other commits]
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
|
|
Calling it file_offset makes the usage more clear, especially with
a new poffset variable that will be added soon for the offset inside
the page.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
|
|
We can handle the existing cow mapping case as a special case directly
in xfs_writepage_map, and share code for allocating delalloc blocks
with regular I/O in xfs_map_blocks. This means we need to always
call xfs_map_blocks for reflink inodes, but we can still skip most of
the work if it turns out that there is no COW mapping overlapping the
current block.
As a subtle detail we need to start caching holes in the wpc to deal
with the case of COW reservations between EOF. But we'll need that
infrastructure later anyway, so this is no big deal.
Based on a patch from Dave Chinner.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
|
|
We already have to check for overlapping COW extents everytime we
come back to a page in xfs_writepage_map / xfs_map_cow, so this
additional trim is not required.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
|
|
We want to be able to use the extent state as a reliably indicator for
the type of I/O, and stop using the buffer head state. For this we
need to stop using the XFS_BMAPI_IGSTATE so that we don't see merged
extents of different types.
Based on a patch from Dave Chinner.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
|
|
Finding a buffer that isn't uptodate doesn't invalidate the mapping for
any given block. The last_sector check will already take care of starting
another ioend as soon as we find any non-update buffer, and if the current
mapping doesn't include the next uptodate buffer the xfs_imap_valid check
will take care of it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
|
|
We already track the page uptodate status based on the buffer uptodate
status, which is updated whenever reading or zeroing blocks.
This code has been there since commit a ptool commit in 2002, which
claims to:
"merge" the 2.4 fsx fix for block size < page size to 2.5. This needed
major changes to actually fit.
and isn't present in other writepage implementations.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
|
|
Both callers want the same looking, so do it only once.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
|
|
Instead of looking at the buffer heads to see if a block is delalloc just
call xfs_bmap_punch_delalloc_range on the whole page - this will leave
any non-delalloc block intact and handle the iteration for us. As a side
effect one more place stops caring about buffer heads and we can remove the
xfs_check_page_type function entirely.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
|
|
For file systems with a block size that equals the page size we never do
partial reads, so we can use the buffer_head-less iomap versions of
readpage and readpages without conflicting with the buffer_head structures
create later in write_begin.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
|
|
Pull more xfs updates from Darrick Wong:
"Here's the second round of patches for XFS for 4.18. Most of the
commits are small cleanups, bug fixes, and continued strengthening of
metadata verifiers; the bulk of the diff is the conversion of the
fs/xfs/ tree to use SPDX tags.
This series has been run through a full xfstests run over the weekend
and through a quick xfstests run against this morning's master, with
no major failures reported.
Summary:
- Strengthen metadata checking to avoid ASSERTing on bad disk
contents
- Validate btree records that are being retrieved for clients
- Strengthen root inode verification
- Convert license blurbs to SPDX tags
- Enable changing DAX flag on directories
- Fix some writeback deadlocks in reflink
- Refactor out some old xfs helpers
- Move type verifiers to a separate file
- Fix some fuzzer crashes
- Various other bug fixes"
* tag 'xfs-4.18-merge-10' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux: (31 commits)
xfs: update incore per-AG inode count
xfs: replace do_mod with native operations
xfs: don't call xfs_da_shrink_inode with NULL bp
xfs: clean up MIN/MAX
xfs: move various type verifiers to common file
xfs: xfs_reflink_convert_cow() memory allocation deadlock
xfs: setup VFS i_rwsem lockdep state correctly
xfs: fix string handling in label get/set functions
xfs: convert to SPDX license tags
xfs: validate btree records on retrieval
xfs: push corruption -> ESTALE conversion to xfs_nfs_get_inode()
xfs: verify root inode more thoroughly
xfs: verify COW extent size hint is valid in inode verifier
xfs: verify extent size hint is valid in inode verifier
xfs: catch bad stripe alignment configurations
iomap: fsync swap files before iterating mappings
xfs: use xfs_trans_getsb in xfs_sync_sb_buf
xfs: don't assert on corrupted unlinked inode list
xfs: explicitly pass buffer size to xfs_corruption_error
xfs: don't assert when on-disk btree pointers are garbage
...
|
|
xfs_reflink_convert_cow() manipulates the incore extent list
in GFP_KERNEL context in the IO submission path whilst holding
locked pages under writeback. This is a memory reclaim deadlock
vector. This code is not in a transaction, so any memory allocations
it makes aren't protected via the memalloc_nofs_save() context that
transactions carry.
Hence we need to run this call under memalloc_nofs_save() context to
prevent potential memory allocations from being run as GFP_KERNEL
and deadlocking.
Signed-Off-By: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Allison Henderson <allison.henderson@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
|
|
Remove the verbose license text from XFS files and replace them
with SPDX tags. This does not change the license of any of the code,
merely refers to the common, up-to-date license files in LICENSES/
This change was mostly scripted. fs/xfs/Makefile and
fs/xfs/libxfs/xfs_fs.h were modified by hand, the rest were detected
and modified by the following command:
for f in `git grep -l "GNU General" fs/xfs/` ; do
echo $f
cat $f | awk -f hdr.awk > $f.new
mv -f $f.new $f
done
And the hdr.awk script that did the modification (including
detecting the difference between GPL-2.0 and GPL-2.0+ licenses)
is as follows:
$ cat hdr.awk
BEGIN {
hdr = 1.0
tag = "GPL-2.0"
str = ""
}
/^ \* This program is free software/ {
hdr = 2.0;
next
}
/any later version./ {
tag = "GPL-2.0+"
next
}
/^ \*\// {
if (hdr > 0.0) {
print "// SPDX-License-Identifier: " tag
print str
print $0
str=""
hdr = 0.0
next
}
print $0
next
}
/^ \* / {
if (hdr > 1.0)
next
if (hdr > 0.0) {
if (str != "")
str = str "\n"
str = str $0
next
}
print $0
next
}
/^ \*/ {
if (hdr > 0.0)
next
print $0
next
}
// {
if (hdr > 0.0) {
if (str != "")
str = str "\n"
str = str $0
next
}
print $0
}
END { }
$
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
|
|
Pull xfs updates from Darrick Wong:
"New features this cycle include the ability to relabel mounted
filesystems, support for fallocated swapfiles, and using FUA for pure
data O_DSYNC directio writes. With this cycle we begin to integrate
online filesystem repair and refactor the growfs code in preparation
for eventual subvolume support, though the road ahead for both
features is quite long.
There are also numerous refactorings of the iomap code to remove
unnecessary log overhead, to disentangle some of the quota code, and
to prepare for buffer head removal in a future upstream kernel.
Metadata validation continues to improve, both in the hot path
veifiers and the online filesystem check code. I anticipate sending a
second pull request in a few days with more metadata validation
improvements.
This series has been run through a full xfstests run over the weekend
and through a quick xfstests run against this morning's master, with
no major failures reported.
Summary:
- Strengthen inode number and structure validation when allocating
inodes.
- Reduce pointless buffer allocations during cache miss
- Use FUA for pure data O_DSYNC directio writes
- Various iomap refactorings
- Strengthen quota metadata verification to avoid unfixable broken
quota
- Make AGFL block freeing a deferred operation to avoid blowing out
transaction reservations when running complex operations
- Get rid of the log item descriptors to reduce log overhead
- Fix various reflink bugs where inodes were double-joined to
transactions
- Don't issue discards when trimming unwritten extents
- Refactor incore dquot initialization and retrieval interfaces
- Fix some locking problmes in the quota scrub code
- Strengthen btree structure checks in scrub code
- Rewrite swapfile activation to use iomap and support unwritten
extents
- Make scrub exit to userspace sooner when corruptions or
cross-referencing problems are found
- Make scrub invoke the data fork scrubber directly on metadata
inodes
- Don't do background reclamation of post-eof and cow blocks when the
fs is suspended
- Fix secondary superblock buffer lifespan hinting
- Refactor growfs to use table-dispatched functions instead of long
stringy functions
- Move growfs code to libxfs
- Implement online fs label getting and setting
- Introduce online filesystem repair (in a very limited capacity)
- Fix unit conversion problems in the realtime freemap iteration
functions
- Various refactorings and cleanups in preparation to remove buffer
heads in a future release
- Reimplement the old bmap call with iomap
- Remove direct buffer head accesses from seek hole/data
- Various bug fixes"
* tag 'xfs-4.18-merge-3' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux: (121 commits)
fs: use ->is_partially_uptodate in page_cache_seek_hole_data
fs: remove the buffer_unwritten check in page_seek_hole_data
fs: move page_cache_seek_hole_data to iomap.c
xfs: use iomap_bmap
iomap: add an iomap-based bmap implementation
iomap: add a iomap_sector helper
iomap: use __bio_add_page in iomap_dio_zero
iomap: move IOMAP_F_BOUNDARY to gfs2
iomap: fix the comment describing IOMAP_NOWAIT
iomap: inline data should be an iomap type, not a flag
mm: split ->readpages calls to avoid non-contiguous pages lists
mm: return an unsigned int from __do_page_cache_readahead
mm: give the 'ret' variable a better name __do_page_cache_readahead
block: add a lower-level bio_add_page interface
xfs: fix error handling in xfs_refcount_insert()
xfs: fix xfs_rtalloc_rec units
xfs: strengthen rtalloc query range checks
xfs: xfs_rtbuf_get should check the bmapi_read results
xfs: xfs_rtword_t should be unsigned, not signed
dax: change bdev_dax_supported() to support boolean returns
...
|
|
Switch to the iomap based bmap implementation to get rid of one of the
last users of xfs_get_blocks.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
|
|
Convert XFS to embedded bio sets.
Acked-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Add a new iomap_swapfile_activate function so that filesystems can
activate swap files without having to use the obsolete and slow bmap
function. This enables XFS to support fallocate'd swap files and
swap files on realtime devices.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Jan Kara <jack@suse.cz>
|
|
XFS currently contains a copy-and-paste of __set_page_dirty(). Export
it from buffer.c instead.
Link: http://lkml.kernel.org/r/20180313132639.17387-6-willy@infradead.org
Signed-off-by: Matthew Wilcox <mawilcox@microsoft.com>
Acked-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Cc: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm
Pull libnvdimm updates from Dan Williams:
"This cycle was was not something I ever want to repeat as there were
several late changes that have only now just settled.
Half of the branch up to commit d2c997c0f145 ("fs, dax: use
page->mapping to warn...") have been in -next for several releases.
The of_pmem driver and the address range scrub rework were late
arrivals, and the dax work was scaled back at the last moment.
The of_pmem driver missed a previous merge window due to an oversight.
A sense of obligation to rectify that miss is why it is included for
4.17. It has acks from PowerPC folks. Stephen reported a build failure
that only occurs when merging it with your latest tree, for now I have
fixed that up by disabling modular builds of of_pmem. A test merge
with your tree has received a build success report from the 0day robot
over 156 configs.
An initial version of the ARS rework was submitted before the merge
window. It is self contained to libnvdimm, a net code reduction, and
passing all unit tests.
The filesystem-dax changes are based on the wait_var_event()
functionality from tip/sched/core. However, late review feedback
showed that those changes regressed truncate performance to a large
degree. The branch was rewound to drop the truncate behavior change
and now only includes preparation patches and cleanups (with full acks
and reviews). The finalization of this dax-dma-vs-trnucate work will
need to wait for 4.18.
Summary:
- A rework of the filesytem-dax implementation provides for detection
of unmap operations (truncate / hole punch) colliding with
in-progress device-DMA. A fix for these collisions remains a
work-in-progress pending resolution of truncate latency and
starvation regressions.
- The of_pmem driver expands the users of libnvdimm outside of x86
and ACPI to describe an implementation of persistent memory on
PowerPC with Open Firmware / Device tree.
- Address Range Scrub (ARS) handling is completely rewritten to
account for the fact that ARS may run for 100s of seconds and there
is no platform defined way to cancel it. ARS will now no longer
block namespace initialization.
- The NVDIMM Namespace Label implementation is updated to handle
label areas as small as 1K, down from 128K.
- Miscellaneous cleanups and updates to unit test infrastructure"
* tag 'libnvdimm-for-4.17' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: (39 commits)
libnvdimm, of_pmem: workaround OF_NUMA=n build error
nfit, address-range-scrub: add module option to skip initial ars
nfit, address-range-scrub: rework and simplify ARS state machine
nfit, address-range-scrub: determine one platform max_ars value
powerpc/powernv: Create platform devs for nvdimm buses
doc/devicetree: Persistent memory region bindings
libnvdimm: Add device-tree based driver
libnvdimm: Add of_node to region and bus descriptors
libnvdimm, region: quiet region probe
libnvdimm, namespace: use a safe lookup for dimm device name
libnvdimm, dimm: fix dpa reservation vs uninitialized label area
libnvdimm, testing: update the default smart ctrl_temperature
libnvdimm, testing: Add emulation for smart injection commands
nfit, address-range-scrub: introduce nfit_spa->ars_state
libnvdimm: add an api to cast a 'struct nd_region' to its 'struct device'
nfit, address-range-scrub: fix scrub in-progress reporting
dax, dm: allow device-mapper to operate without dax support
dax: introduce CONFIG_DAX_DRIVER
fs, dax: use page->mapping to warn if truncate collides with a busy page
ext2, dax: introduce ext2_dax_aops
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull misc vfs updates from Al Viro:
"Assorted stuff, including Christoph's I_DIRTY patches"
* 'work.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
fs: move I_DIRTY_INODE to fs.h
ubifs: fix bogus __mark_inode_dirty(I_DIRTY_SYNC | I_DIRTY_DATASYNC) call
ntfs: fix bogus __mark_inode_dirty(I_DIRTY_SYNC | I_DIRTY_DATASYNC) call
gfs2: fix bogus __mark_inode_dirty(I_DIRTY_SYNC | I_DIRTY_DATASYNC) calls
fs: fold open_check_o_direct into do_dentry_open
vfs: Replace stray non-ASCII homoglyph characters with their ASCII equivalents
vfs: make sure struct filename->iname is word-aligned
get rid of pointless includes of fs_struct.h
[poll] annotate SAA6588_CMD_POLL users
|
|
In preparation for the dax implementation to start associating dax pages
to inodes via page->mapping, we need to provide a 'struct
address_space_operations' instance for dax. Otherwise, direct-I/O
triggers incorrect page cache assumptions and warnings like the
following:
WARNING: CPU: 27 PID: 1783 at fs/xfs/xfs_aops.c:1468
xfs_vm_set_page_dirty+0xf3/0x1b0 [xfs]
[..]
CPU: 27 PID: 1783 Comm: dma-collision Tainted: G O 4.15.0-rc2+ #984
[..]
Call Trace:
set_page_dirty_lock+0x40/0x60
bio_set_pages_dirty+0x37/0x50
iomap_dio_actor+0x2b7/0x3b0
? iomap_dio_zero+0x110/0x110
iomap_apply+0xa4/0x110
iomap_dio_rw+0x29e/0x3b0
? iomap_dio_zero+0x110/0x110
? xfs_file_dio_aio_read+0x7c/0x1a0 [xfs]
xfs_file_dio_aio_read+0x7c/0x1a0 [xfs]
xfs_file_read_iter+0xa0/0xc0 [xfs]
__vfs_read+0xf9/0x170
vfs_read+0xa6/0x150
SyS_pread64+0x93/0xb0
entry_SYSCALL_64_fastpath+0x1f/0x96
...where the default set_page_dirty() handler assumes that dirty state
is being tracked in 'struct page' flags.
Cc: Jeff Moyer <jmoyer@redhat.com>
Cc: Matthew Wilcox <mawilcox@microsoft.com>
Cc: Ross Zwisler <ross.zwisler@linux.intel.com>
Suggested-by: Jan Kara <jack@suse.cz>
Suggested-by: Dave Chinner <david@fromorbit.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Simplify the control flow a bit in preparation for O_ATOMIC-related
changes.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
|
|
There is no reason to get a mapping bigger than what we were asked for.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
|
|
xfs_trans_alloc() does GFP_KERNEL allocation, and we can call it
while holding pages locked for writeback in the ->writepages path.
The memory allocation is allowed to wait on pages under writeback,
and so can wait on pages that are tagged as writeback by the
caller.
This affects both pre-IO submission and post-IO submission paths.
Hence xfs_setsize_trans_alloc(), xfs_reflink_end_cow(),
xfs_iomap_write_unwritten() and xfs_reflink_cancel_cow_range().
xfs_iomap_write_unwritten() already does the right thing, but the
others don't. Fix them.
Signed-Off-By: Dave Chinner <dchinner@redhat.com>
Fixes: 281627df3eb5 ("xfs: log file size updates at I/O completion time")
Fixes: 43caeb187deb9 ("xfs: move mappings from cow fork to data fork after copy-write)"
Reviewed-by: Eric Sandeen <sandeen@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
|
|
Every so often we blow the ASSERT(type != XFS_IO_COW) in xfs_map_blocks
when running fsstress, as we do in generic/269. The cause of this is
writeback racing with truncate -- writeback doesn't take the iolock, so
truncate can sneak in to decrease i_size and truncate page cache while
writeback is gathering buffer heads to schedule writeout.
If we hit this race on a block that has a CoW mapping, we'll get a valid
imap from the CoW fork but the reduced i_size trims the mapping to zero
length (which makes it invalid), so we call xfs_map_blocks to try again.
This doesn't do much anyway, since any mapping we get out of that will
also be invalid, so we might as well skip the assert and just stop.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
|
|
Starting with commit 57e734423ad ("vsprintf: refactor %pK code out of
pointer"), the behavior of the raw '%p' printk format specifier was
changed to print a 32-bit hash of the pointer value to avoid leaking
kernel pointers into dmesg. For most situations that's good.
This is /undesirable/ behavior when we're trying to debug XFS, however,
so define a PTR_FMT that prints the actual pointer when we're in debug
mode.
Note that %p for tracepoints still prints the raw pointer, so in the
long run we could consider rewriting some of these messages as
tracepoints.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
|
|
Fix some integer overflow problems if offset + count happen to be large
enough to cause an integer overflow.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
|
|
The first thing that xfs_writepage_map does is clobber the offset
parameter. Since we never use the passed-in value, turn the parameter
into a local variable. This gets rid of an UBSAN warning in generic/466.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
|
|
Fix some complaints from the UBSAN about signed integer addition overflows.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
|
|
The writeback rework in commit fbcc02561359 ("xfs: Introduce
writeback context for writepages") introduced a subtle change in
behavior with regard to the block mapping used across the
->writepages() sequence. The previous xfs_cluster_write() code would
only flush pages up to EOF at the time of the writepage, thus
ensuring that any pages due to file-extending writes would be
handled on a separate cycle and with a new, updated block mapping.
The updated code establishes a block mapping in xfs_writepage_map()
that could extend beyond EOF if the file has post-eof preallocation.
Because we now use the generic writeback infrastructure and pass the
cached mapping to each writepage call, there is no implicit EOF
limit in place. If eofblocks trimming occurs during ->writepages(),
any post-eof portion of the cached mapping becomes invalid. The
eofblocks code has no means to serialize against writeback because
there are no pages associated with post-eof blocks. Therefore if an
eofblocks trim occurs and is followed by a file-extending buffered
write, not only has the mapping become invalid, but we could end up
writing a page to disk based on the invalid mapping.
Consider the following sequence of events:
- A buffered write creates a delalloc extent and post-eof
speculative preallocation.
- Writeback starts and on the first writepage cycle, the delalloc
extent is converted to real blocks (including the post-eof blocks)
and the mapping is cached.
- The file is closed and xfs_release() trims post-eof blocks. The
cached writeback mapping is now invalid.
- Another buffered write appends the file with a delalloc extent.
- The concurrent writeback cycle picks up the just written page
because the writeback range end is LLONG_MAX. xfs_writepage_map()
attributes it to the (now invalid) cached mapping and writes the
data to an incorrect location on disk (and where the file offset is
still backed by a delalloc extent).
This problem is reproduced by xfstests test generic/464, which
triggers racing writes, appends, open/closes and writeback requests.
To address this problem, trim the mapping used during writeback to
within EOF when the mapping is validated. This ensures the mapping
is revalidated for any pages encountered beyond EOF as of the time
the current mapping was cached or last validated.
Reported-by: Eryu Guan <eguan@redhat.com>
Diagnosed-by: Eryu Guan <eguan@redhat.com>
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
|
|
Recently we've had warnings arise from the vm handing us pages
without bufferheads attached to them. This should not ever occur
in XFS, but we don't defend against it properly if it does. The only
place where we remove bufferheads from a page is in
xfs_vm_releasepage(), but we can't tell the difference here between
"page is dirty so don't release" and "page is dirty but is being
invalidated so release it".
In some places that are invalidating pages ask for pages to be
released and follow up afterward calling ->releasepage by checking
whether the page was dirty and then aborting the invalidation. This
is a possible vector for releasing buffers from a page but then
leaving it in the mapping, so we really do need to avoid dirty pages
in xfs_vm_releasepage().
To differentiate between invalidated pages and normal pages, we need
to clear the page dirty flag when invalidating the pages. This can
be done through xfs_vm_invalidatepage(), and will result
xfs_vm_releasepage() seeing the page as clean which matches the
bufferhead state on the page after calling block_invalidatepage().
Hence we can re-add the page dirty check in xfs_vm_releasepage to
catch the case where we might be releasing a page that is actually
dirty and so should not have the bufferheads on it removed. This
will remove one possible vector of "dirty page with no bufferheads"
and so help narrow down the search for the root cause of that
problem.
Signed-Off-By: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
|
|
Since commit d531d91d6990 ("xfs: always use unwritten extents for
direct I/O writes"), we start allocating unwritten extents for all
direct writes to allow appending aio in XFS.
But for dio writes that could extend file size we update the in-core
inode size first, then convert the unwritten extents to real
allocations at dio completion time in xfs_dio_write_end_io(). Thus a
racing direct read could see the new i_size and find the unwritten
extents first and read zeros instead of actual data, if the direct
writer also takes a shared iolock.
Fix it by updating the in-core inode size after the unwritten extent
conversion. To do this, introduce a new boolean argument to
xfs_iomap_write_unwritten() to tell if we want to update in-core
i_size or not.
Suggested-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Signed-off-by: Eryu Guan <eguan@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm
Pull libnvdimm from Dan Williams:
"A rework of media error handling in the BTT driver and other updates.
It has appeared in a few -next releases and collected some late-
breaking build-error and warning fixups as a result.
Summary:
- Media error handling support in the Block Translation Table (BTT)
driver is reworked to address sleeping-while-atomic locking and
memory-allocation-context conflicts.
- The dax_device lookup overhead for xfs and ext4 is moved out of the
iomap hot-path to a mount-time lookup.
- A new 'ecc_unit_size' sysfs attribute is added to advertise the
read-modify-write boundary property of a persistent memory range.
- Preparatory fix-ups for arm and powerpc pmem support are included
along with other miscellaneous fixes"
* tag 'libnvdimm-for-4.14' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: (26 commits)
libnvdimm, btt: fix format string warnings
libnvdimm, btt: clean up warning and error messages
ext4: fix null pointer dereference on sbi
libnvdimm, nfit: move the check on nd_reserved2 to the endpoint
dax: fix FS_DAX=n BLOCK=y compilation
libnvdimm: fix integer overflow static analysis warning
libnvdimm, nd_blk: remove mmio_flush_range()
libnvdimm, btt: rework error clearing
libnvdimm: fix potential deadlock while clearing errors
libnvdimm, btt: cache sector_size in arena_info
libnvdimm, btt: ensure that flags were also unchanged during a map_read
libnvdimm, btt: refactor map entry operations with macros
libnvdimm, btt: fix a missed NVDIMM_IO_ATOMIC case in the write path
libnvdimm, nfit: export an 'ecc_unit_size' sysfs attribute
ext4: perform dax_device lookup at mount
ext2: perform dax_device lookup at mount
xfs: perform dax_device lookup at mount
dax: introduce a fs_dax_get_by_bdev() helper
libnvdimm, btt: check memory allocation failure
libnvdimm, label: fix index block size calculation
...
|
|
Pull block layer updates from Jens Axboe:
"This is the first pull request for 4.14, containing most of the code
changes. It's a quiet series this round, which I think we needed after
the churn of the last few series. This contains:
- Fix for a registration race in loop, from Anton Volkov.
- Overflow complaint fix from Arnd for DAC960.
- Series of drbd changes from the usual suspects.
- Conversion of the stec/skd driver to blk-mq. From Bart.
- A few BFQ improvements/fixes from Paolo.
- CFQ improvement from Ritesh, allowing idling for group idle.
- A few fixes found by Dan's smatch, courtesy of Dan.
- A warning fixup for a race between changing the IO scheduler and
device remova. From David Jeffery.
- A few nbd fixes from Josef.
- Support for cgroup info in blktrace, from Shaohua.
- Also from Shaohua, new features in the null_blk driver to allow it
to actually hold data, among other things.
- Various corner cases and error handling fixes from Weiping Zhang.
- Improvements to the IO stats tracking for blk-mq from me. Can
drastically improve performance for fast devices and/or big
machines.
- Series from Christoph removing bi_bdev as being needed for IO
submission, in preparation for nvme multipathing code.
- Series from Bart, including various cleanups and fixes for switch
fall through case complaints"
* 'for-4.14/block' of git://git.kernel.dk/linux-block: (162 commits)
kernfs: checking for IS_ERR() instead of NULL
drbd: remove BIOSET_NEED_RESCUER flag from drbd_{md_,}io_bio_set
drbd: Fix allyesconfig build, fix recent commit
drbd: switch from kmalloc() to kmalloc_array()
drbd: abort drbd_start_resync if there is no connection
drbd: move global variables to drbd namespace and make some static
drbd: rename "usermode_helper" to "drbd_usermode_helper"
drbd: fix race between handshake and admin disconnect/down
drbd: fix potential deadlock when trying to detach during handshake
drbd: A single dot should be put into a sequence.
drbd: fix rmmod cleanup, remove _all_ debugfs entries
drbd: Use setup_timer() instead of init_timer() to simplify the code.
drbd: fix potential get_ldev/put_ldev refcount imbalance during attach
drbd: new disk-option disable-write-same
drbd: Fix resource role for newly created resources in events2
drbd: mark symbols static where possible
drbd: Send P_NEG_ACK upon write error in protocol != C
drbd: add explicit plugging when submitting batches
drbd: change list_for_each_safe to while(list_first_entry_or_null)
drbd: introduce drbd_recv_header_maybe_unplug
...
|
|
Our loop in xfs_finish_page_writeback, which iterates over all buffer
heads in a page and then calls end_buffer_async_write, which also
iterates over all buffers in the page to check if any I/O is in flight
is not only inefficient, but also potentially dangerous as
end_buffer_async_write can cause the page and all buffers to be freed.
Replace it with a single loop that does the work of end_buffer_async_write
on a per-page basis.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
|
|
The ->iomap_begin() operation is a hot path, so cache the
fs_dax_get_by_host() result at mount time to avoid the incurring the
hash lookup overhead on a per-i/o basis.
Reported-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
This way we don't need a block_device structure to submit I/O. The
block_device has different life time rules from the gendisk and
request_queue and is usually only available when the block device node
is open. Other callers need to explicitly create one (e.g. the lightnvm
passthrough code, or the new nvme multipathing code).
For the actual I/O path all that we need is the gendisk, which exists
once per block device. But given that the block layer also does
partition remapping we additionally need a partition index, which is
used for said remapping in generic_make_request.
Note that all the block drivers generally want request_queue or
sometimes the gendisk, so this removes a layer of indirection all
over the stack.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Pull XFS updates from Darrick Wong:
"Here are some changes for you for 4.13. For the most part it's fixes
for bugs and deadlock problems, and preparation for online fsck in
some future merge window.
- Avoid quotacheck deadlocks
- Fix transaction overflows when bunmapping fragmented files
- Refactor directory readahead
- Allow admin to configure if ASSERT is fatal
- Improve transaction usage detail logging during overflows
- Minor cleanups
- Don't leak log items when the log shuts down
- Remove double-underscore typedefs
- Various preparation for online scrubbing
- Introduce new error injection configuration sysfs knobs
- Refactor dq_get_next to use extent map directly
- Fix problems with iterating the page cache for unwritten data
- Implement SEEK_{HOLE,DATA} via iomap
- Refactor XFS to use iomap SEEK_HOLE and SEEK_DATA
- Don't use MAXPATHLEN to check on-disk symlink target lengths"
* tag 'xfs-4.13-merge-5' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux: (48 commits)
xfs: don't crash on unexpected holes in dir/attr btrees
xfs: rename MAXPATHLEN to XFS_SYMLINK_MAXLEN
xfs: fix contiguous dquot chunk iteration livelock
xfs: Switch to iomap for SEEK_HOLE / SEEK_DATA
vfs: Add iomap_seek_hole and iomap_seek_data helpers
vfs: Add page_cache_seek_hole_data helper
xfs: remove a whitespace-only line from xfs_fs_get_nextdqblk
xfs: rewrite xfs_dq_get_next_id using xfs_iext_lookup_extent
xfs: Check for m_errortag initialization in xfs_errortag_test
xfs: grab dquots without taking the ilock
xfs: fix semicolon.cocci warnings
xfs: Don't clear SGID when inheriting ACLs
xfs: free cowblocks and retry on buffered write ENOSPC
xfs: replace log_badcrc_factor knob with error injection tag
xfs: convert drop_writes to use the errortag mechanism
xfs: remove unneeded parameter from XFS_TEST_ERROR
xfs: expose errortag knobs via sysfs
xfs: make errortag a per-mountpoint structure
xfs: free uncommitted transactions during log recovery
xfs: don't allow bmap on rt files
...
|
|
Pull core block/IO updates from Jens Axboe:
"This is the main pull request for the block layer for 4.13. Not a huge
round in terms of features, but there's a lot of churn related to some
core cleanups.
Note this depends on the UUID tree pull request, that Christoph
already sent out.
This pull request contains:
- A series from Christoph, unifying the error/stats codes in the
block layer. We now use blk_status_t everywhere, instead of using
different schemes for different places.
- Also from Christoph, some cleanups around request allocation and IO
scheduler interactions in blk-mq.
- And yet another series from Christoph, cleaning up how we handle
and do bounce buffering in the block layer.
- A blk-mq debugfs series from Bart, further improving on the support
we have for exporting internal information to aid debugging IO
hangs or stalls.
- Also from Bart, a series that cleans up the request initialization
differences across types of devices.
- A series from Goldwyn Rodrigues, allowing the block layer to return
failure if we will block and the user asked for non-blocking.
- Patch from Hannes for supporting setting loop devices block size to
that of the underlying device.
- Two series of patches from Javier, fixing various issues with
lightnvm, particular around pblk.
- A series from me, adding support for write hints. This comes with
NVMe support as well, so applications can help guide data placement
on flash to improve performance, latencies, and write
amplification.
- A series from Ming, improving and hardening blk-mq support for
stopping/starting and quiescing hardware queues.
- Two pull requests for NVMe updates. Nothing major on the feature
side, but lots of cleanups and bug fixes. From the usual crew.
- A series from Neil Brown, greatly improving the bio rescue set
support. Most notably, this kills the bio rescue work queues, if we
don't really need them.
- Lots of other little bug fixes that are all over the place"
* 'for-4.13/block' of git://git.kernel.dk/linux-block: (217 commits)
lightnvm: pblk: set line bitmap check under debug
lightnvm: pblk: verify that cache read is still valid
lightnvm: pblk: add initialization check
lightnvm: pblk: remove target using async. I/Os
lightnvm: pblk: use vmalloc for GC data buffer
lightnvm: pblk: use right metadata buffer for recovery
lightnvm: pblk: schedule if data is not ready
lightnvm: pblk: remove unused return variable
lightnvm: pblk: fix double-free on pblk init
lightnvm: pblk: fix bad le64 assignations
nvme: Makefile: remove dead build rule
blk-mq: map all HWQ also in hyperthreaded system
nvmet-rdma: register ib_client to not deadlock in device removal
nvme_fc: fix error recovery on link down.
nvmet_fc: fix crashes on bad opcodes
nvme_fc: Fix crash when nvme controller connection fails.
nvme_fc: replace ioabort msleep loop with completion
nvme_fc: fix double calls to nvme_cleanup_cmd()
nvme-fabrics: verify that a controller returns the correct NQN
nvme: simplify nvme_dev_attrs_are_visible
...
|
|
Reviewed-by: Andreas Dilger <adilger@dilger.ca>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
bmap returns a dumb LBA address but not the block device that goes with
that LBA. Swapfiles don't care about this and will blindly assume that
the data volume is the correct blockdev, which is totally bogus for
files on the rt subvolume. This results in the swap code doing IOs to
arbitrary locations on the data device(!) if the passed in mapping is a
realtime file, so just turn off bmap for rt files.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
|
|
bmap returns a dumb LBA address but not the block device that goes with
that LBA. Swapfiles don't care about this and will blindly assume that
the data volume is the correct blockdev, which is totally bogus for
files on the rt subvolume. This results in the swap code doing IOs to
arbitrary locations on the data device(!) if the passed in mapping is a
realtime file, so just turn off bmap for rt files.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
|
|
This is a purely mechanical patch that removes the private
__{u,}int{8,16,32,64}_t typedefs in favor of using the system
{u,}int{8,16,32,64}_t typedefs. This is the sed script used to perform
the transformation and fix the resulting whitespace and indentation
errors:
s/typedef\t__uint8_t/typedef __uint8_t\t/g
s/typedef\t__uint/typedef __uint/g
s/typedef\t__int\([0-9]*\)_t/typedef int\1_t\t/g
s/__uint8_t\t/__uint8_t\t\t/g
s/__uint/uint/g
s/__int\([0-9]*\)_t\t/__int\1_t\t\t/g
s/__int/int/g
/^typedef.*int[0-9]*_t;$/d
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
|
|
Replace bi_error with a new bi_status to allow for a clear conversion.
Note that device mapper overloaded bi_error with a private value, which
we'll have to keep arround at least for now and thus propagate to a
proper blk_status_t value.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@fb.com>
|
|
Pull xfs updates from Darrick Wong:
"Here are the XFS changes for 4.12. The big new feature for this
release is the new space mapping ioctl that we've been discussing
since LSF2016, but other than that most of the patches are larger bug
fixes, memory corruption prevention, and other cleanups.
Summary:
- various code cleanups
- introduce GETFSMAP ioctl
- various refactoring
- avoid dio reads past eof
- fix memory corruption and other errors with fragmented directory blocks
- fix accidental userspace memory corruptions
- publish fs uuid in superblock
- make fstrim terminatable
- fix race between quotaoff and in-core inode creation
- avoid use-after-free when finishing up w/ buffer heads
- reserve enough space to handle bmap tree resizing during cow remap"
* tag 'xfs-4.12-merge-7' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux: (53 commits)
xfs: fix use-after-free in xfs_finish_page_writeback
xfs: reserve enough blocks to handle btree splits when remapping
xfs: wait on new inodes during quotaoff dquot release
xfs: update ag iterator to support wait on new inodes
xfs: support ability to wait on new inodes
xfs: publish UUID in struct super_block
xfs: Allow user to kill fstrim process
xfs: better log intent item refcount checking
xfs: fix up quotacheck buffer list error handling
xfs: remove xfs_trans_ail_delete_bulk
xfs: don't use bool values in trace buffers
xfs: fix getfsmap userspace memory corruption while setting OF_LAST
xfs: fix __user annotations for xfs_ioc_getfsmap
xfs: corruption needs to respect endianess too!
xfs: use NULL instead of 0 to initialize a pointer in xfs_ioc_getfsmap
xfs: use NULL instead of 0 to initialize a pointer in xfs_getfsmap
xfs: simplify validation of the unwritten extent bit
xfs: remove unused values from xfs_exntst_t
xfs: remove the unused XFS_MAXLINK_1 define
xfs: more do_div cleanups
...
|
|
Commit 28b783e47ad7 ("xfs: bufferhead chains are invalid after
end_page_writeback") fixed one use-after-free issue by
pre-calculating the loop conditionals before calling bh->b_end_io()
in the end_io processing loop, but it assigned 'next' pointer before
checking end offset boundary & breaking the loop, at which point the
bh might be freed already, and caused use-after-free.
This is caught by KASAN when running fstests generic/127 on sub-page
block size XFS.
[ 2517.244502] run fstests generic/127 at 2017-04-27 07:30:50
[ 2747.868840] ==================================================================
[ 2747.876949] BUG: KASAN: use-after-free in xfs_destroy_ioend+0x3d3/0x4e0 [xfs] at addr ffff8801395ae698
...
[ 2747.918245] Call Trace:
[ 2747.920975] dump_stack+0x63/0x84
[ 2747.924673] kasan_object_err+0x21/0x70
[ 2747.928950] kasan_report+0x271/0x530
[ 2747.933064] ? xfs_destroy_ioend+0x3d3/0x4e0 [xfs]
[ 2747.938409] ? end_page_writeback+0xce/0x110
[ 2747.943171] __asan_report_load8_noabort+0x19/0x20
[ 2747.948545] xfs_destroy_ioend+0x3d3/0x4e0 [xfs]
[ 2747.953724] xfs_end_io+0x1af/0x2b0 [xfs]
[ 2747.958197] process_one_work+0x5ff/0x1000
[ 2747.962766] worker_thread+0xe4/0x10e0
[ 2747.966946] kthread+0x2d3/0x3d0
[ 2747.970546] ? process_one_work+0x1000/0x1000
[ 2747.975405] ? kthread_create_on_node+0xc0/0xc0
[ 2747.980457] ? syscall_return_slowpath+0xe6/0x140
[ 2747.985706] ? do_page_fault+0x30/0x80
[ 2747.989887] ret_from_fork+0x2c/0x40
[ 2747.993874] Object at ffff8801395ae690, in cache buffer_head size: 104
[ 2748.001155] Allocated:
[ 2748.003782] PID = 8327
[ 2748.006411] save_stack_trace+0x1b/0x20
[ 2748.010688] save_stack+0x46/0xd0
[ 2748.014383] kasan_kmalloc+0xad/0xe0
[ 2748.018370] kasan_slab_alloc+0x12/0x20
[ 2748.022648] kmem_cache_alloc+0xb8/0x1b0
[ 2748.027024] alloc_buffer_head+0x22/0xc0
[ 2748.031399] alloc_page_buffers+0xd1/0x250
[ 2748.035968] create_empty_buffers+0x30/0x410
[ 2748.040730] create_page_buffers+0x120/0x1b0
[ 2748.045493] __block_write_begin_int+0x17a/0x1800
[ 2748.050740] iomap_write_begin+0x100/0x2f0
[ 2748.055308] iomap_zero_range_actor+0x253/0x5c0
[ 2748.060362] iomap_apply+0x157/0x270
[ 2748.064347] iomap_zero_range+0x5a/0x80
[ 2748.068624] iomap_truncate_page+0x6b/0xa0
[ 2748.073227] xfs_setattr_size+0x1f7/0xa10 [xfs]
[ 2748.078312] xfs_vn_setattr_size+0x68/0x140 [xfs]
[ 2748.083589] xfs_file_fallocate+0x4ac/0x820 [xfs]
[ 2748.088838] vfs_fallocate+0x2cf/0x780
[ 2748.093021] SyS_fallocate+0x48/0x80
[ 2748.097006] do_syscall_64+0x18a/0x430
[ 2748.101186] return_from_SYSCALL_64+0x0/0x6a
[ 2748.105948] Freed:
[ 2748.108189] PID = 8327
[ 2748.110816] save_stack_trace+0x1b/0x20
[ 2748.115093] save_stack+0x46/0xd0
[ 2748.118788] kasan_slab_free+0x73/0xc0
[ 2748.122969] kmem_cache_free+0x7a/0x200
[ 2748.127247] free_buffer_head+0x41/0x80
[ 2748.131524] try_to_free_buffers+0x178/0x250
[ 2748.136316] xfs_vm_releasepage+0x2e9/0x3d0 [xfs]
[ 2748.141563] try_to_release_page+0x100/0x180
[ 2748.146325] invalidate_inode_pages2_range+0x7da/0xcf0
[ 2748.152087] xfs_shift_file_space+0x37d/0x6e0 [xfs]
[ 2748.157557] xfs_collapse_file_space+0x49/0x120 [xfs]
[ 2748.163223] xfs_file_fallocate+0x2a7/0x820 [xfs]
[ 2748.168462] vfs_fallocate+0x2cf/0x780
[ 2748.172642] SyS_fallocate+0x48/0x80
[ 2748.176629] do_syscall_64+0x18a/0x430
[ 2748.180810] return_from_SYSCALL_64+0x0/0x6a
Fixed it by checking on offset against end & breaking out first,
dereference bh only if there're still bufferheads to process.
Signed-off-by: Eryu Guan <eguan@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
|
|
xfs has defined PF_FSTRANS to declare a scope GFP_NOFS semantic quite
some time ago. We would like to make this concept more generic and use
it for other filesystems as well. Let's start by giving the flag a more
generic name PF_MEMALLOC_NOFS which is in line with an exiting
PF_MEMALLOC_NOIO already used for the same purpose for GFP_NOIO
contexts. Replace all PF_FSTRANS usage from the xfs code in the first
step before we introduce a full API for it as xfs uses the flag directly
anyway.
This patch doesn't introduce any functional change.
Link: http://lkml.kernel.org/r/20170306131408.9828-4-mhocko@kernel.org
Signed-off-by: Michal Hocko <mhocko@suse.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Theodore Ts'o <tytso@mit.edu>
Cc: Chris Mason <clm@fb.com>
Cc: David Sterba <dsterba@suse.cz>
Cc: Jan Kara <jack@suse.cz>
Cc: Nikolay Borisov <nborisov@suse.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Opencoding the trivial checks makes it much easier to read (and grep..).
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
|
