Age | Commit message (Collapse) | Author | Files | Lines |
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs iov_iter cleanups from Christian Brauner:
"This contains a minor cleanup. The patches drop an unused argument
from import_single_range() allowing to replace import_single_range()
with import_ubuf() and dropping import_single_range() completely"
* tag 'vfs-6.8.iov_iter' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
iov_iter: replace import_single_range() with import_ubuf()
iov_iter: remove unused 'iov' argument from import_single_range()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs cachefiles updates from Christian Brauner:
"This contains improvements for on-demand cachefiles.
If the daemon crashes and the on-demand cachefiles fd is unexpectedly
closed in-flight requests and subsequent read operations associated
with the fd will fail with EIO. This causes issues in various
scenarios as this failure is currently unrecoverable.
The work contained in this pull request introduces a failover mode and
enables the daemon to recover in-flight requested-related objects. A
restarted daemon will be able to process requests as usual.
This requires that in-flight requests are stored during daemon crash
or while the daemon is offline. In addition, a handle to
/dev/cachefiles needs to be stored.
This can be done by e.g., systemd's fdstore (cf. [1]) which enables
the restarted daemon to recover state.
Three new states are introduced in this patchset:
(1) CLOSE
Object is closed by the daemon.
(2) OPEN
Object is open and ready for processing. IOW, the open request
has been handled successfully.
(3) REOPENING
Object has been previously closed and is now reopened due to a
read request.
A restarted daemon can recover the /dev/cachefiles fd from systemd's
fdstore and writes "restore" to the device. This causes the object
state to be reset from CLOSE to REOPENING and reinitializes the
object.
The daemon may now handle the open request. Any in-flight operations
are restored and handled avoiding interruptions for users"
Link: https://systemd.io/FILE_DESCRIPTOR_STORE [1]
* tag 'vfs-6.8.cachefiles' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
cachefiles: add restore command to recover inflight ondemand read requests
cachefiles: narrow the scope of triggering EPOLLIN events in ondemand mode
cachefiles: resend an open request if the read request's object is closed
cachefiles: extract ondemand info field from cachefiles_object
cachefiles: introduce object ondemand state
|
|
Pull vfs rw updates from Christian Brauner:
"This contains updates from Amir for read-write backing file helpers
for stacking filesystems such as overlayfs:
- Fanotify is currently in the process of introducing pre content
events. Roughly, a new permission event will be added indicating
that it is safe to write to the file being accessed. These events
are used by hierarchical storage managers to e.g., fill the content
of files on first access.
During that work we noticed that our current permission checking is
inconsistent in rw_verify_area() and remap_verify_area().
Especially in the splice code permission checking is done multiple
times. For example, one time for the whole range and then again for
partial ranges inside the iterator.
In addition, we mostly do permission checking before we call
file_start_write() except for a few places where we call it after.
For pre-content events we need such permission checking to be done
before file_start_write(). So this is a nice reason to clean this
all up.
After this series, all permission checking is done before
file_start_write().
As part of this cleanup we also massaged the splice code a bit. We
got rid of a few helpers because we are alredy drowning in special
read-write helpers. We also cleaned up the return types for splice
helpers.
- Introduce generic read-write helpers for backing files. This lifts
some overlayfs code to common code so it can be used by the FUSE
passthrough work coming in over the next cycles. Make Amir and
Miklos the maintainers for this new subsystem of the vfs"
* tag 'vfs-6.8.rw' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs: (30 commits)
fs: fix __sb_write_started() kerneldoc formatting
fs: factor out backing_file_mmap() helper
fs: factor out backing_file_splice_{read,write}() helpers
fs: factor out backing_file_{read,write}_iter() helpers
fs: prepare for stackable filesystems backing file helpers
fsnotify: optionally pass access range in file permission hooks
fsnotify: assert that file_start_write() is not held in permission hooks
fsnotify: split fsnotify_perm() into two hooks
fs: use splice_copy_file_range() inline helper
splice: return type ssize_t from all helpers
fs: use do_splice_direct() for nfsd/ksmbd server-side-copy
fs: move file_start_write() into direct_splice_actor()
fs: fork splice_file_range() from do_splice_direct()
fs: create {sb,file}_write_not_started() helpers
fs: create file_write_started() helper
fs: create __sb_write_started() helper
fs: move kiocb_start_write() into vfs_iocb_iter_write()
fs: move permission hook out of do_iter_read()
fs: move permission hook out of do_iter_write()
fs: move file_start_write() into vfs_iter_write()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs mount updates from Christian Brauner:
"This contains the work to retrieve detailed information about mounts
via two new system calls. This is hopefully the beginning of the end
of the saga that started with fsinfo() years ago.
The LWN articles in [1] and [2] can serve as a summary so we can avoid
rehashing everything here.
At LSFMM in May 2022 we got into a room and agreed on what we want to
do about fsinfo(). Basically, split it into pieces. This is the first
part of that agreement. Specifically, it is concerned with retrieving
information about mounts. So this only concerns the mount information
retrieval, not the mount table change notification, or the extended
filesystem specific mount option work. That is separate work.
Currently mounts have a 32bit id. Mount ids are already in heavy use
by libmount and other low-level userspace but they can't be relied
upon because they're recycled very quickly. We agreed that mounts
should carry a unique 64bit id by which they can be referenced
directly. This is now implemented as part of this work.
The new 64bit mount id is exposed in statx() through the new
STATX_MNT_ID_UNIQUE flag. If the flag isn't raised the old mount id is
returned. If it is raised and the kernel supports the new 64bit mount
id the flag is raised in the result mask and the new 64bit mount id is
returned. New and old mount ids do not overlap so they cannot be
conflated.
Two new system calls are introduced that operate on the 64bit mount
id: statmount() and listmount(). A summary of the api and usage can be
found on LWN as well (cf. [3]) but of course, I'll provide a summary
here as well.
Both system calls rely on struct mnt_id_req. Which is the request
struct used to pass the 64bit mount id identifying the mount to
operate on. It is extensible to allow for the addition of new
parameters and for future use in other apis that make use of mount
ids.
statmount() mimicks the semantics of statx() and exposes a set flags
that userspace may raise in mnt_id_req to request specific information
to be retrieved. A statmount() call returns a struct statmount filled
in with information about the requested mount. Supported requests are
indicated by raising the request flag passed in struct mnt_id_req in
the @mask argument in struct statmount.
Currently we do support:
- STATMOUNT_SB_BASIC:
Basic filesystem info
- STATMOUNT_MNT_BASIC
Mount information (mount id, parent mount id, mount attributes etc)
- STATMOUNT_PROPAGATE_FROM
Propagation from what mount in current namespace
- STATMOUNT_MNT_ROOT
Path of the root of the mount (e.g., mount --bind /bla /mnt returns /bla)
- STATMOUNT_MNT_POINT
Path of the mount point (e.g., mount --bind /bla /mnt returns /mnt)
- STATMOUNT_FS_TYPE
Name of the filesystem type as the magic number isn't enough due to submounts
The string options STATMOUNT_MNT_{ROOT,POINT} and STATMOUNT_FS_TYPE
are appended to the end of the struct. Userspace can use the offsets
in @fs_type, @mnt_root, and @mnt_point to reference those strings
easily.
The struct statmount reserves quite a bit of space currently for
future extensibility. This isn't really a problem and if this bothers
us we can just send a follow-up pull request during this cycle.
listmount() is given a 64bit mount id via mnt_id_req just as
statmount(). It takes a buffer and a size to return an array of the
64bit ids of the child mounts of the requested mount. Userspace can
thus choose to either retrieve child mounts for a mount in batches or
iterate through the child mounts. For most use-cases it will be
sufficient to just leave space for a few child mounts. But for big
mount tables having an iterator is really helpful. Iterating through a
mount table works by setting @param in mnt_id_req to the mount id of
the last child mount retrieved in the previous listmount() call"
Link: https://lwn.net/Articles/934469 [1]
Link: https://lwn.net/Articles/829212 [2]
Link: https://lwn.net/Articles/950569 [3]
* tag 'vfs-6.8.mount' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
add selftest for statmount/listmount
fs: keep struct mnt_id_req extensible
wire up syscalls for statmount/listmount
add listmount(2) syscall
statmount: simplify string option retrieval
statmount: simplify numeric option retrieval
add statmount(2) syscall
namespace: extract show_path() helper
mounts: keep list of mounts in an rbtree
add unique mount ID
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs super updates from Christian Brauner:
"This contains the super work for this cycle including the long-awaited
series by Jan to make it possible to prevent writing to mounted block
devices:
- Writing to mounted devices is dangerous and can lead to filesystem
corruption as well as crashes. Furthermore syzbot comes with more
and more involved examples how to corrupt block device under a
mounted filesystem leading to kernel crashes and reports we can do
nothing about. Add tracking of writers to each block device and a
kernel cmdline argument which controls whether other writeable
opens to block devices open with BLK_OPEN_RESTRICT_WRITES flag are
allowed.
Note that this effectively only prevents modification of the
particular block device's page cache by other writers. The actual
device content can still be modified by other means - e.g. by
issuing direct scsi commands, by doing writes through devices lower
in the storage stack (e.g. in case loop devices, DM, or MD are
involved) etc. But blocking direct modifications of the block
device page cache is enough to give filesystems a chance to perform
data validation when loading data from the underlying storage and
thus prevent kernel crashes.
Syzbot can use this cmdline argument option to avoid uninteresting
crashes. Also users whose userspace setup does not need writing to
mounted block devices can set this option for hardening. We expect
that this will be interesting to quite a few workloads.
Btrfs is currently opted out of this because they still haven't
merged patches we require for this to work from three kernel
releases ago.
- Reimplement block device freezing and thawing as holder operations
on the block device.
This allows us to extend block device freezing to all devices
associated with a superblock and not just the main device. It also
allows us to remove get_active_super() and thus another function
that scans the global list of superblocks.
Freezing via additional block devices only works if the filesystem
chooses to use @fs_holder_ops for these additional devices as well.
That currently only includes ext4 and xfs.
Earlier releases switched get_tree_bdev() and mount_bdev() to use
@fs_holder_ops. The remaining nilfs2 open-coded version of
mount_bdev() has been converted to rely on @fs_holder_ops as well.
So block device freezing for the main block device will continue to
work as before.
There should be no regressions in functionality. The only special
case is btrfs where block device freezing for the main block device
never worked because sb->s_bdev isn't set. Block device freezing
for btrfs can be fixed once they can switch to @fs_holder_ops but
that can happen whenever they're ready"
* tag 'vfs-6.8.super' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs: (27 commits)
block: Fix a memory leak in bdev_open_by_dev()
super: don't bother with WARN_ON_ONCE()
super: massage wait event mechanism
ext4: Block writes to journal device
xfs: Block writes to log device
fs: Block writes to mounted block devices
btrfs: Do not restrict writes to btrfs devices
block: Add config option to not allow writing to mounted devices
block: Remove blkdev_get_by_*() functions
bcachefs: Convert to bdev_open_by_path()
fs: handle freezing from multiple devices
fs: remove dead check
nilfs2: simplify device handling
fs: streamline thaw_super_locked
ext4: simplify device handling
xfs: simplify device handling
fs: simplify setup_bdev_super() calls
blkdev: comment fs_holder_ops
porting: document block device freeze and thaw changes
fs: remove unused helper
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull misc vfs updates from Christian Brauner:
"This contains the usual miscellaneous features, cleanups, and fixes
for vfs and individual fses.
Features:
- Add Jan Kara as VFS reviewer
- Show correct device and inode numbers in proc/<pid>/maps for vma
files on stacked filesystems. This is now easily doable thanks to
the backing file work from the last cycles. This comes with
selftests
Cleanups:
- Remove a redundant might_sleep() from wait_on_inode()
- Initialize pointer with NULL, not 0
- Clarify comment on access_override_creds()
- Rework and simplify eventfd_signal() and eventfd_signal_mask()
helpers
- Process aio completions in batches to avoid needless wakeups
- Completely decouple struct mnt_idmap from namespaces. We now only
keep the actual idmapping around and don't stash references to
namespaces
- Reformat maintainer entries to indicate that a given subsystem
belongs to fs/
- Simplify fput() for files that were never opened
- Get rid of various pointless file helpers
- Rename various file helpers
- Rename struct file members after SLAB_TYPESAFE_BY_RCU switch from
last cycle
- Make relatime_need_update() return bool
- Use GFP_KERNEL instead of GFP_USER when allocating superblocks
- Replace deprecated ida_simple_*() calls with their current ida_*()
counterparts
Fixes:
- Fix comments on user namespace id mapping helpers. They aren't
kernel doc comments so they shouldn't be using /**
- s/Retuns/Returns/g in various places
- Add missing parameter documentation on can_move_mount_beneath()
- Rename i_mapping->private_data to i_mapping->i_private_data
- Fix a false-positive lockdep warning in pipe_write() for watch
queues
- Improve __fget_files_rcu() code generation to improve performance
- Only notify writer that pipe resizing has finished after setting
pipe->max_usage otherwise writers are never notified that the pipe
has been resized and hang
- Fix some kernel docs in hfsplus
- s/passs/pass/g in various places
- Fix kernel docs in ntfs
- Fix kcalloc() arguments order reported by gcc 14
- Fix uninitialized value in reiserfs"
* tag 'vfs-6.8.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs: (36 commits)
reiserfs: fix uninit-value in comp_keys
watch_queue: fix kcalloc() arguments order
ntfs: dir.c: fix kernel-doc function parameter warnings
fs: fix doc comment typo fs tree wide
selftests/overlayfs: verify device and inode numbers in /proc/pid/maps
fs/proc: show correct device and inode numbers in /proc/pid/maps
eventfd: Remove usage of the deprecated ida_simple_xx() API
fs: super: use GFP_KERNEL instead of GFP_USER for super block allocation
fs/hfsplus: wrapper.c: fix kernel-doc warnings
fs: add Jan Kara as reviewer
fs/inode: Make relatime_need_update return bool
pipe: wakeup wr_wait after setting max_usage
file: remove __receive_fd()
file: stop exposing receive_fd_user()
fs: replace f_rcuhead with f_task_work
file: remove pointless wrapper
file: s/close_fd_get_file()/file_close_fd()/g
Improve __fget_files_rcu() code generation (and thus __fget_light())
file: massage cleanup of files that failed to open
fs/pipe: Fix lockdep false-positive in watchqueue pipe_write()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux
Pull nfsd fix from Chuck Lever:
- Fix another regression in the NFSD administrative API
* tag 'nfsd-6.7-3' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux:
nfsd: drop the nfsd_put helper
|
|
Pull smb client fixes from Steve French:
"Three important multichannel smb3 client fixes found in recent
testing:
- fix oops due to incorrect refcounting of interfaces after
disabling multichannel
- fix possible unrecoverable session state after disabling
multichannel with active sessions
- fix two places that were missing use of chan_lock"
* tag '6.7-rc8-smb3-mchan-fixes' of git://git.samba.org/sfrench/cifs-2.6:
cifs: do not depend on release_iface for maintaining iface_list
cifs: cifs_chan_is_iface_active should be called with chan_lock held
cifs: after disabling multichannel, mark tcon for reconnect
|
|
It's not safe to call nfsd_put once nfsd_last_thread has been called, as
that function will zero out the nn->nfsd_serv pointer.
Drop the nfsd_put helper altogether and open-code the svc_put in its
callers instead. That allows us to not be reliant on the value of that
pointer when handling an error.
Fixes: 2a501f55cd64 ("nfsd: call nfsd_last_thread() before final nfsd_put()")
Reported-by: Zhi Li <yieli@redhat.com>
Cc: NeilBrown <neilb@suse.de>
Signed-off-by: Jeffrey Layton <jlayton@redhat.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing fixes from Steven Rostedt:
- Fix a NULL kernel dereference in set_gid() on tracefs mounting.
When tracefs is mounted with "gid=1000", it will update the existing
dentries to have the new gid. The tracefs_inode which is retrieved by
a container_of(dentry->d_inode) has flags to see if the inode belongs
to the eventfs system.
The issue that was fixed was if getdents() was called on tracefs that
was previously mounted, and was not closed. It will leave a "cursor
dentry" in the subdirs list of the current dentries that set_gid()
walks. On a remount of tracefs, the container_of(dentry->d_inode)
will dereference a NULL pointer and cause a crash when referenced.
Simply have a check for dentry->d_inode to see if it is NULL and if
so, skip that entry.
- Fix the bits of the eventfs_inode structure.
The "is_events" bit was taken from the nr_entries field, but the
nr_entries field wasn't updated to be 30 bits and was still 31.
Including the "is_freed" bit this would use 33 bits which would make
the structure use another integer for just one bit.
* tag 'trace-v6.7-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
eventfs: Fix bitwise fields for "is_events"
tracefs: Check for dentry->d_inode exists in set_gid()
|
|
A flag was needed to denote which eventfs_inode was the "events"
directory, so a bit was taken from the "nr_entries" field, as there's not
that many entries, and 2^30 is plenty. But the bit number for nr_entries
was not updated to reflect the bit taken from it, which would add an
unnecessary integer to the structure.
Link: https://lore.kernel.org/linux-trace-kernel/20240102151832.7ca87275@gandalf.local.home
Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Fixes: 7e8358edf503e ("eventfs: Fix file and directory uid and gid ownership")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
If a getdents() is called on the tracefs directory but does not get all
the files, it can leave a "cursor" dentry in the d_subdirs list of tracefs
dentry. This cursor dentry does not have a d_inode for it. Before
referencing tracefs_inode from the dentry, the d_inode must first be
checked if it has content. If not, then it's not a tracefs_inode and can
be ignored.
The following caused a crash:
#define getdents64(fd, dirp, count) syscall(SYS_getdents64, fd, dirp, count)
#define BUF_SIZE 256
#define TDIR "/tmp/file0"
int main(void)
{
char buf[BUF_SIZE];
int fd;
int n;
mkdir(TDIR, 0777);
mount(NULL, TDIR, "tracefs", 0, NULL);
fd = openat(AT_FDCWD, TDIR, O_RDONLY);
n = getdents64(fd, buf, BUF_SIZE);
ret = mount(NULL, TDIR, NULL, MS_NOSUID|MS_REMOUNT|MS_RELATIME|MS_LAZYTIME,
"gid=1000");
return 0;
}
That's because the 256 BUF_SIZE was not big enough to read all the
dentries of the tracefs file system and it left a "cursor" dentry in the
subdirs of the tracefs root inode. Then on remounting with "gid=1000",
it would cause an iteration of all dentries which hit:
ti = get_tracefs(dentry->d_inode);
if (ti && (ti->flags & TRACEFS_EVENT_INODE))
eventfs_update_gid(dentry, gid);
Which crashed because of the dereference of the cursor dentry which had a NULL
d_inode.
In the subdir loop of the dentry lookup of set_gid(), if a child has a
NULL d_inode, simply skip it.
Link: https://lore.kernel.org/all/20240102135637.3a21fb10@gandalf.local.home/
Link: https://lore.kernel.org/linux-trace-kernel/20240102151249.05da244d@gandalf.local.home
Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Fixes: 7e8358edf503e ("eventfs: Fix file and directory uid and gid ownership")
Reported-by: "Ubisectech Sirius" <bugreport@ubisectech.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
Add checks to all the VFS paths for "are we in a RO snapshot?".
Note - we don't check this when setting inode options via our xattr
interface, since those generally only affect data placement, not
contents of data.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Reported-by: "Carl E. Thompson" <list-bcachefs@carlthompson.net>
|
|
Add a new superblock section that contains a list of
{ minor version, recovery passes, errors_to_fix }
that is - a list of recovery passes that must be run when downgrading
past a given version, and a list of errors to silently fix.
The upcoming disk accounting rewrite is not going to be fully
compatible: we're going to have to regenerate accounting both when
upgrading to the new version, and also from downgrading from the new
version, since the new method of doing disk space accounting is a
completely different architecture based on deltas, and synchronizing
them for every jounal entry write to maintain compatibility is going to
be too expensive and impractical.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Add two new superblock fields. Since the main section of the superblock
is now fully, we have to add a new variable length section for them -
bch_sb_field_ext.
- recovery_passes_requried: recovery passes that must be run on the
next mount
- errors_silent: errors that will be silently fixed
These are to improve upgrading and dwongrading: these fields won't be
cleared until after recovery successfully completes, so there won't be
any issues with crashing partway through an upgrade or a downgrade.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
The next patch will start to refer to recovery passes from the
superblock; naturally, we now need identifiers that don't change, since
the existing enum is in the order in which they are run and is not
fixed.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
similar to prt_bitflags(), but for ulong arrays
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
we need BCH_SB_ERR_MAX in bcachefs.h
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
BCH_REPLICAS_MAX isn't the actual maximum number of pointers in an
extent, it's the maximum number of dirty pointers.
We don't have a real restriction on the number of cached pointers, and
we don't want a fixed size array here anyways - so switch to
DARRAY_PREALLOCATED().
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Reported-and-tested-by: Daniel J Blueman <daniel@quora.org>
|
|
Add support to darray for preallocating some number of elements.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
We sometimes use darrays for quite large buffers - the btree write
buffer in particular needs large buffers, since it must be sized to hold
all the write buffer keys outstanding in the journal.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Move the slowpath (actually growing the darray) to an out-of-line
function; also, add some helpers for the upcoming btree write buffer
rewrite.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
If a superblock write hasn't happened (i.e. we never had to go rw), then
c->sb.version will be out of date w.r.t. c->disk_sb.sb->version.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
turns out iterate_iovec() mutates __iov, we need to save our own copy
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Reported-by: Marcin Mirosław <marcin@mejor.pl>
|
|
peek_upto() checks against the end position and bails out before
FILTER_SNAPSHOTS checks; this is because if we end up at a different
inode number than the original search key none of the keys we see might
be visibile in the current snapshot - we might be looking at inode in a
completely different subvolume.
But this is broken, because when we're iterating over extents we're
checking against the extent start position to decide when to bail out,
and the extent start position isn't monotonically increasing until after
we've run FILTER_SNAPSHOTS.
Fix this by adding a simple inode number check where the old bailout
check was, and moving the main check to the correct position.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Reported-by: "Carl E. Thompson" <list-bcachefs@carlthompson.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing fixes from Steven Rostedt:
- Fix readers that are blocked on the ring buffer when buffer_percent
is 100%. They are supposed to wake up when the buffer is full, but
because the sub-buffer that the writer is on is never considered
"dirty" in the calculation, dirty pages will never equal nr_pages.
Add +1 to the dirty count in order to count for the sub-buffer that
the writer is on.
- When a reader is blocked on the "snapshot_raw" file, it is to be
woken up when a snapshot is done and be able to read the snapshot
buffer. But because the snapshot swaps the buffers (the main one with
the snapshot one), and the snapshot reader is waiting on the old
snapshot buffer, it was not woken up (because it is now on the main
buffer after the swap). Worse yet, when it reads the buffer after a
snapshot, it's not reading the snapshot buffer, it's reading the live
active main buffer.
Fix this by forcing a wakeup of all readers on the snapshot buffer
when a new snapshot happens, and then update the buffer that the
reader is reading to be back on the snapshot buffer.
- Fix the modification of the direct_function hash. There was a race
when new functions were added to the direct_function hash as when it
moved function entries from the old hash to the new one, a direct
function trace could be hit and not see its entry.
This is fixed by allocating the new hash, copy all the old entries
onto it as well as the new entries, and then use rcu_assign_pointer()
to update the new direct_function hash with it.
This also fixes a memory leak in that code.
- Fix eventfs ownership
* tag 'trace-v6.7-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
ftrace: Fix modification of direct_function hash while in use
tracing: Fix blocked reader of snapshot buffer
ring-buffer: Fix wake ups when buffer_percent is set to 100
eventfs: Fix file and directory uid and gid ownership
|
|
parse_server_interfaces should be in complete charge of maintaining
the iface_list linked list. Today, iface entries are removed
from the list only when the last refcount is dropped.
i.e. in release_iface. However, this can result in undercounting
of refcount if the server stops advertising interfaces (which
Azure SMB server does).
This change puts parse_server_interfaces in full charge of
maintaining the iface_list. So if an empty list is returned
by the server, the entries in the list will immediately be
removed. This way, a following call to the same function will
not find entries in the list.
Fixes: aa45dadd34e4 ("cifs: change iface_list from array to sorted linked list")
Cc: stable@vger.kernel.org
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
cifs_chan_is_iface_active checks the channels of a session to see
if the associated iface is active. This should always happen
with chan_lock held. However, these two callers of this function
were missing this locking.
This change makes sure the function calls are protected with
proper locking.
Fixes: b54034a73baf ("cifs: during reconnect, update interface if necessary")
Fixes: fa1d0508bdd4 ("cifs: account for primary channel in the interface list")
Cc: stable@vger.kernel.org
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Once the server disables multichannel for an active multichannel
session, on the following reconnect, the client would reduce
the number of channels to 1. However, it could be the case that
the tree connect was active on one of these disabled channels.
This results in an unrecoverable state.
This change fixes that by making sure that whenever a channel
is being terminated, the session and tcon are marked for
reconnect too. This could mean a few redundant tree connect
calls to the server, but considering that this is not a frequent
event, we should be okay.
Fixes: ee1d21794e55 ("cifs: handle when server stops supporting multichannel")
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Pull ksmbd server fix from Steve French:
- address possible slab out of bounds in parsing of open requests
* tag '6.7rc7-smb3-srv-fix' of git://git.samba.org/ksmbd:
ksmbd: fix slab-out-of-bounds in smb_strndup_from_utf16()
|
|
Pull bcachefs fixes from Kent Overstreet:
"Just a few fixes: besides a few one liners, we have a fix for
snapshots + compression where the extent update path didn't account
for the fact that with snapshots, we might split an existing extent
into three, not just two; and a small fixup for promotes which were
broken by the recent changes in the data update path to correctly take
into account device durability"
* tag 'bcachefs-2023-12-27' of https://evilpiepirate.org/git/bcachefs:
bcachefs: Fix promotes
bcachefs: Fix leakage of internal error code
bcachefs: Fix insufficient disk reservation with compression + snapshots
bcachefs: fix BCH_FSCK_ERR enum
|
|
The cpu_key was not initialized in reiserfs_delete_solid_item(), which triggered
this issue.
Reported-and-tested-by: <syzbot+b3b14fb9f8a14c5d0267@syzkaller.appspotmail.com>
Signed-off-by: Edward Adam Davis <eadavis@qq.com>
Link: https://lore.kernel.org/r/tencent_9EA7E746DE92DBC66049A62EDF6ED64CA706@qq.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
If ->NameOffset/Length is bigger than ->CreateContextsOffset/Length,
ksmbd_check_message doesn't validate request buffer it correctly.
So slab-out-of-bounds warning from calling smb_strndup_from_utf16()
in smb2_open() could happen. If ->NameLength is non-zero, Set the larger
of the two sums (Name and CreateContext size) as the offset and length of
the data area.
Reported-by: Yang Chaoming <lometsj@live.com>
Cc: stable@vger.kernel.org
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
The recent work to fix data moves w.r.t. durability broke promotes,
because the caused us to bail out when the extent minus pointers being
dropped still has enough pointers to satisfy the current number of
replicas.
Disable this check when we're adding cached replicas.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char / misc driver fixes from Greg KH:
"Here are a small number of various driver fixes for 6.7-rc7 that
normally come through the char-misc tree, and one debugfs fix as well.
Included in here are:
- iio and hid sensor driver fixes for a number of small things
- interconnect driver fixes
- brcm_nvmem driver fixes
- debugfs fix for previous fix
- guard() definition in device.h so that many subsystems can start
using it for 6.8-rc1 (requested by Dan Williams to make future
merges easier)
All of these have been in linux-next for a while with no reported
issues"
* tag 'char-misc-6.7-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (21 commits)
debugfs: initialize cancellations earlier
Revert "iio: hid-sensor-als: Add light color temperature support"
Revert "iio: hid-sensor-als: Add light chromaticity support"
nvmem: brcm_nvram: store a copy of NVRAM content
dt-bindings: nvmem: mxs-ocotp: Document fsl,ocotp
driver core: Add a guard() definition for the device_lock()
interconnect: qcom: icc-rpm: Fix peak rate calculation
iio: adc: MCP3564: fix hardware identification logic
iio: adc: MCP3564: fix calib_bias and calib_scale range checks
iio: adc: meson: add separate config for axg SoC family
iio: adc: imx93: add four channels for imx93 adc
iio: adc: ti_am335x_adc: Fix return value check of tiadc_request_dma()
interconnect: qcom: sm8250: Enable sync_state
iio: triggered-buffer: prevent possible freeing of wrong buffer
iio: imu: inv_mpu6050: fix an error code problem in inv_mpu6050_read_raw
iio: imu: adis16475: use bit numbers in assign_bit()
iio: imu: adis16475: add spi_device_id table
iio: tmag5273: fix temperature offset
interconnect: Treat xlate() returning NULL node as an error
iio: common: ms_sensors: ms_sensors_i2c: fix humidity conversion time table
...
|
|
Assert that the file object is allocated in a backing_file container
so that file_user_path() could be used to display the user path and
not the backing file's path in /proc/<pid>/maps.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
|
|
There is not much in those helpers, but it makes sense to have them
logically next to the backing_file_{read,write}_iter() helpers as they
may grow more common logic in the future.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
|
|
Overlayfs submits files io to backing files on other filesystems.
Factor out some common helpers to perform io to backing files, into
fs/backing-file.c.
Suggested-by: Miklos Szeredi <miklos@szeredi.hu>
Link: https://lore.kernel.org/r/CAJfpeguhmZbjP3JLqtUy0AdWaHOkAPWeP827BBWwRFEAUgnUcQ@mail.gmail.com
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
|
|
In preparation for factoring out some backing file io helpers from
overlayfs, move backing_file_open() into a new file fs/backing-file.c
and header.
Add a MAINTAINERS entry for stackable filesystems and add a Kconfig
FS_STACK which stackable filesystems need to select.
For now, the backing_file struct, the backing_file alloc/free functions
and the backing_file_real_path() accessor remain internal to file_table.c.
We may change that in the future.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
|
|
It was reported that when mounting the tracefs file system with a gid
other than root, the ownership did not carry down to the eventfs directory
due to the dynamic nature of it.
A fix was done to solve this, but it had two issues.
(a) if the attr passed into update_inode_attr() was NULL, it didn't do
anything. This is true for files that have not had a chown or chgrp
done to itself or any of its sibling files, as the attr is allocated
for all children when any one needs it.
# umount /sys/kernel/tracing
# mount -o rw,seclabel,relatime,gid=1000 -t tracefs nodev /mnt
# ls -ld /mnt/events/sched
drwxr-xr-x 28 root rostedt 0 Dec 21 13:12 /mnt/events/sched/
# ls -ld /mnt/events/sched/sched_switch
drwxr-xr-x 2 root rostedt 0 Dec 21 13:12 /mnt/events/sched/sched_switch/
But when checking the files:
# ls -l /mnt/events/sched/sched_switch
total 0
-rw-r----- 1 root root 0 Dec 21 13:12 enable
-rw-r----- 1 root root 0 Dec 21 13:12 filter
-r--r----- 1 root root 0 Dec 21 13:12 format
-r--r----- 1 root root 0 Dec 21 13:12 hist
-r--r----- 1 root root 0 Dec 21 13:12 id
-rw-r----- 1 root root 0 Dec 21 13:12 trigger
(b) When the attr does not denote the UID or GID, it defaulted to using
the parent uid or gid. This is incorrect as changing the parent
uid or gid will automatically change all its children.
# chgrp tracing /mnt/events/timer
# ls -ld /mnt/events/timer
drwxr-xr-x 2 root tracing 0 Dec 21 14:34 /mnt/events/timer
# ls -l /mnt/events/timer
total 0
-rw-r----- 1 root root 0 Dec 21 14:35 enable
-rw-r----- 1 root root 0 Dec 21 14:35 filter
drwxr-xr-x 2 root tracing 0 Dec 21 14:35 hrtimer_cancel
drwxr-xr-x 2 root tracing 0 Dec 21 14:35 hrtimer_expire_entry
drwxr-xr-x 2 root tracing 0 Dec 21 14:35 hrtimer_expire_exit
drwxr-xr-x 2 root tracing 0 Dec 21 14:35 hrtimer_init
drwxr-xr-x 2 root tracing 0 Dec 21 14:35 hrtimer_start
drwxr-xr-x 2 root tracing 0 Dec 21 14:35 itimer_expire
drwxr-xr-x 2 root tracing 0 Dec 21 14:35 itimer_state
drwxr-xr-x 2 root tracing 0 Dec 21 14:35 tick_stop
drwxr-xr-x 2 root tracing 0 Dec 21 14:35 timer_cancel
drwxr-xr-x 2 root tracing 0 Dec 21 14:35 timer_expire_entry
drwxr-xr-x 2 root tracing 0 Dec 21 14:35 timer_expire_exit
drwxr-xr-x 2 root tracing 0 Dec 21 14:35 timer_init
drwxr-xr-x 2 root tracing 0 Dec 21 14:35 timer_start
At first it was thought that this could be easily fixed by just making the
default ownership of the superblock when it was mounted. But this does not
handle the case of:
# chgrp tracing instances
# mkdir instances/foo
If the superblock was used, then the group ownership would be that of what
it was when it was mounted, when it should instead be "tracing".
Instead, set a flag for the top level eventfs directory ("events") to flag
which eventfs_inode belongs to it.
Since the "events" directory's dentry and inode are never freed, it does
not need to use its attr field to restore its mode and ownership. Use the
this eventfs_inode's attr as the default ownership for all the files and
directories underneath it.
When the events eventfs_inode is created, it sets its ownership to its
parent uid and gid. As the events directory is created at boot up before
it gets mounted, this will always be uid=0 and gid=0. If it's created via
an instance, then it will take the ownership of the instance directory.
When the file system is mounted, it will update all the gids if one is
specified. This will have a callback to update the events evenfs_inode's
default entries.
When a file or directory is created under the events directory, it will
walk the ei->dentry parents until it finds the evenfs_inode that belongs
to the events directory to retrieve the default uid and gid values.
Link: https://lore.kernel.org/all/CAHk-=wiwQtUHvzwyZucDq8=Gtw+AnwScyLhpFswrQ84PjhoGsg@mail.gmail.com/
Link: https://lore.kernel.org/linux-trace-kernel/20231221190757.7eddbca9@gandalf.local.home
Cc: stable@vger.kernel.org
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Dongliang Cui <cuidongliang390@gmail.com>
Cc: Hongyu Jin <hongyu.jin@unisoc.com>
Fixes: 0dfc852b6fe3 ("eventfs: Have event files and directories default to parent uid and gid")
Reviewed-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Tested-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
Tetsuo Handa pointed out that in the (now reverted)
lockdep commit I initialized the data too late. The
same is true for the cancellation data, it must be
initialized before the cmpxchg(), otherwise it may
be done twice and possibly even overwriting data in
there already when there's a race. Fix that, which
also requires destroying the mutex in case we lost
the race.
Fixes: 8c88a474357e ("debugfs: add API to allow debugfs operations cancellation")
Reported-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Link: https://lore.kernel.org/r/20231221150444.1e47a0377f80.If7e8ba721ba2956f12c6e8405e7d61e154aa7ae7@changeid
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
When overwriting and splitting existing extents, we weren't correctly
accounting for a 3 way split of a compressed extent.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
When an afs_volume struct is put, its refcount is reduced to 0 before
the cell->volume_lock is taken and the volume removed from the
cell->volumes tree.
Unfortunately, this means that the lookup code can race and see a volume
with a zero ref in the tree, resulting in a use-after-free:
refcount_t: addition on 0; use-after-free.
WARNING: CPU: 3 PID: 130782 at lib/refcount.c:25 refcount_warn_saturate+0x7a/0xda
...
RIP: 0010:refcount_warn_saturate+0x7a/0xda
...
Call Trace:
afs_get_volume+0x3d/0x55
afs_create_volume+0x126/0x1de
afs_validate_fc+0xfe/0x130
afs_get_tree+0x20/0x2e5
vfs_get_tree+0x1d/0xc9
do_new_mount+0x13b/0x22e
do_mount+0x5d/0x8a
__do_sys_mount+0x100/0x12a
do_syscall_64+0x3a/0x94
entry_SYSCALL_64_after_hwframe+0x62/0x6a
Fix this by:
(1) When putting, use a flag to indicate if the volume has been removed
from the tree and skip the rb_erase if it has.
(2) When looking up, use a conditional ref increment and if it fails
because the refcount is 0, replace the node in the tree and set the
removal flag.
Fixes: 20325960f875 ("afs: Reorganise volume and server trees to be rooted on the cell")
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Jeffrey Altman <jaltman@auristor.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
In afs_update_cell(), ret is the result of the DNS lookup and the errors
are to be handled by a switch - however, the value gets clobbered in
between by setting it to -ENOMEM in case afs_alloc_vlserver_list()
fails.
Fix this by moving the setting of -ENOMEM into the error handling for
OOM failure. Further, only do it if we don't have an alternative error
to return.
Found by Linux Verification Center (linuxtesting.org) with SVACE. Based
on a patch from Anastasia Belova [1].
Fixes: d5c32c89b208 ("afs: Fix cell DNS lookup")
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Jeffrey Altman <jaltman@auristor.com>
cc: Anastasia Belova <abelova@astralinux.ru>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
cc: lvc-project@linuxtesting.org
Link: https://lore.kernel.org/r/20231221085849.1463-1-abelova@astralinux.ru/ [1]
Link: https://lore.kernel.org/r/1700862.1703168632@warthog.procyon.org.uk/ # v1
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs
Pull AFS fixes from David Howells:
"Improve the interaction of arbitrary lookups in the AFS dynamic root
that hit DNS lookup failures [1] where kafs behaves differently from
openafs and causes some applications to fail that aren't expecting
that. Further, negative DNS results aren't getting removed and are
causing failures to persist.
- Always delete unused (particularly negative) dentries as soon as
possible so that they don't prevent future lookups from retrying.
- Fix the handling of new-style negative DNS lookups in ->lookup() to
make them return ENOENT so that userspace doesn't get confused when
stat succeeds but the following open on the looked up file then
fails.
- Fix key handling so that DNS lookup results are reclaimed almost as
soon as they expire rather than sitting round either forever or for
an additional 5 mins beyond a set expiry time returning
EKEYEXPIRED. They persist for 1s as /bin/ls will do a second stat
call if the first fails"
Link: https://bugzilla.kernel.org/show_bug.cgi?id=216637 [1]
Reviewed-by: Jeffrey Altman <jaltman@auristor.com>
* tag 'afs-fixes-20231221' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs:
keys, dns: Allow key types (eg. DNS) to be reclaimed immediately on expiry
afs: Fix dynamic root lookup DNS check
afs: Fix the dynamic root's d_delete to always delete unused dentries
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing fixes from Steven Rostedt:
- Fix another kerneldoc warning
- Fix eventfs files to inherit the ownership of its parent directory.
The dynamic creation of dentries in eventfs did not take into account
if the tracefs file system was mounted with a gid/uid, and would
still default to the gid/uid of root. This is a regression.
- Fix warning when synthetic event testing is enabled along with
startup event tracing testing is enabled
* tag 'trace-v6.7-rc6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing / synthetic: Disable events after testing in synth_event_gen_test_init()
eventfs: Have event files and directories default to parent uid and gid
tracing/synthetic: fix kernel-doc warnings
|
|
Dongliang reported:
I found that in the latest version, the nodes of tracefs have been
changed to dynamically created.
This has caused me to encounter a problem where the gid I specified in
the mounting parameters cannot apply to all files, as in the following
situation:
/data/tmp/events # mount | grep tracefs
tracefs on /data/tmp type tracefs (rw,seclabel,relatime,gid=3012)
gid 3012 = readtracefs
/data/tmp # ls -lh
total 0
-r--r----- 1 root readtracefs 0 1970-01-01 08:00 README
-r--r----- 1 root readtracefs 0 1970-01-01 08:00 available_events
ums9621_1h10:/data/tmp/events # ls -lh
total 0
drwxr-xr-x 2 root root 0 2023-12-19 00:56 alarmtimer
drwxr-xr-x 2 root root 0 2023-12-19 00:56 asoc
It will prevent certain applications from accessing tracefs properly, I
try to avoid this issue by making the following modifications.
To fix this, have the files created default to taking the ownership of
the parent dentry unless the ownership was previously set by the user.
Link: https://lore.kernel.org/linux-trace-kernel/1703063706-30539-1-git-send-email-dongliang.cui@unisoc.com/
Link: https://lore.kernel.org/linux-trace-kernel/20231220105017.1489d790@gandalf.local.home
Cc: stable@vger.kernel.org
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Hongyu Jin <hongyu.jin@unisoc.com>
Fixes: 28e12c09f5aa0 ("eventfs: Save ownership and mode")
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Reported-by: Dongliang Cui <cuidongliang390@gmail.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
Bring in the changes to the file infrastructure for this cycle. Mostly
cleanups and some performance tweaks.
* file: remove __receive_fd()
* file: stop exposing receive_fd_user()
* fs: replace f_rcuhead with f_task_work
* file: remove pointless wrapper
* file: s/close_fd_get_file()/file_close_fd()/g
* Improve __fget_files_rcu() code generation (and thus __fget_light())
* file: massage cleanup of files that failed to open
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Correct the kernel-doc function parameter warnings for function
ntfs_dir_fsync() to prevent the following kernel-doc warnings:
dir.c:1489: warning: Function parameter or member 'start' not described in 'ntfs_dir_fsync'
dir.c:1489: warning: Function parameter or member 'end' not described in 'ntfs_dir_fsync'
dir.c:1489: warning: Excess function parameter 'dentry' description in 'ntfs_dir_fsync'
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://lore.kernel.org/r/20231219045414.24670-1-rdunlap@infradead.org
Reviewed-by: Namjae Jeon <linkinjeon@kernel.org>
Cc: Anton Altaparmakov <anton@tuxera.com>
Cc: Namjae Jeon <linkinjeon@kernel.org>
Cc: <linux-ntfs-dev@lists.sourceforge.net>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|