Age | Commit message (Collapse) | Author | Files | Lines |
|
fuse_writepages() ignores some errors taken from fuse_writepages_fill() I
believe it is a bug: if .writepages is called with WB_SYNC_ALL it should
either guarantee that all data was successfully saved or return error.
Fixes: 26d614df1da9 ("fuse: Implement writepages callback")
Signed-off-by: Vasily Averin <vvs@virtuozzo.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
|
|
fuse_writepages_fill uses following construction:
if (wpa && ap->num_pages &&
(A || B || C)) {
action;
} else if (wpa && D) {
if (E) {
the same action;
}
}
- ap->num_pages check is always true and can be removed
- "if" and "else if" calls the same action and can be merged.
Move checking A, B, C, D, E conditions to a helper, add comments.
Original-patch-by: Vasily Averin <vvs@virtuozzo.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
|
|
Previous patch changed handling of remount/reconfigure to ignore all
options, including those that are unknown to the fuse kernel fs. This was
done for backward compatibility, but this likely only affects the old
mount(2) API.
The new fsconfig(2) based reconfiguration could possibly be improved. This
would make the new API less of a drop in replacement for the old, OTOH this
is a good chance to get rid of some weirdnesses in the old API.
Several other behaviors might make sense:
1) unknown options are rejected, known options are ignored
2) unknown options are rejected, known options are rejected if the value
is changed, allowed otherwise
3) all options are rejected
Prior to the backward compatibility fix to ignore all options all known
options were accepted (1), even if they change the value of a mount
parameter; fuse_reconfigure() does not look at the config values set by
fuse_parse_param().
To fix that we'd need to verify that the value provided is the same as set
in the initial configuration (2). The major drawback is that this is much
more complex than just rejecting all attempts at changing options (3);
i.e. all options signify initial configuration values and don't make sense
on reconfigure.
This patch opts for (3) with the rationale that no mount options are
reconfigurable in fuse.
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
|
|
The command
mount -o remount -o unknownoption /mnt/fuse
succeeds on kernel versions prior to v5.4 and fails on kernel version at or
after. This is because fuse_parse_param() rejects any unrecognised options
in case of FS_CONTEXT_FOR_RECONFIGURE, just as for FS_CONTEXT_FOR_MOUNT.
This causes a regression in case the fuse filesystem is in fstab, since
remount sends all options found there to the kernel; even ones that are
meant for the initial mount and are consumed by the userspace fuse server.
Fix this by ignoring mount options, just as fuse_remount_fs() did prior to
the conversion to the new API.
Reported-by: Stefan Priebe <s.priebe@profihost.ag>
Fixes: c30da2e981a7 ("fuse: convert to use the new mount API")
Cc: <stable@vger.kernel.org> # v5.4
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
|
|
s_op->remount_fs() is only called from legacy_reconfigure(), which is not
used after being converted to the new API.
Convert to using ->reconfigure(). This restores the previous behavior of
syncing the filesystem and rejecting MS_MANDLOCK on remount.
Fixes: c30da2e981a7 ("fuse: convert to use the new mount API")
Cc: <stable@vger.kernel.org> # v5.4
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
|
|
fuse_writepages_fill() calls tree_insert() with ap->num_pages = 0 which
triggers the following warning:
WARNING: CPU: 1 PID: 17211 at fs/fuse/file.c:1728 tree_insert+0xab/0xc0 [fuse]
RIP: 0010:tree_insert+0xab/0xc0 [fuse]
Call Trace:
fuse_writepages_fill+0x5da/0x6a0 [fuse]
write_cache_pages+0x171/0x470
fuse_writepages+0x8a/0x100 [fuse]
do_writepages+0x43/0xe0
Fix up the warning and clean up the code around rb-tree insertion:
- Rename tree_insert() to fuse_insert_writeback() and make it return the
conflicting entry in case of failure
- Re-add tree_insert() as a wrapper around fuse_insert_writeback()
- Rename fuse_writepage_in_flight() to fuse_writepage_add() and reverse
the meaning of the return value to mean
+ "true" in case the writepage entry was successfully added
+ "false" in case it was in-fligt queued on an existing writepage
entry's auxiliary list or the existing writepage entry's temporary
page updated
Switch from fuse_find_writeback() + tree_insert() to
fuse_insert_writeback()
- Move setting orig_pages to before inserting/updating the entry; this may
result in the orig_pages value being discarded later in case of an
in-flight request
- In case of a new writepage entry use fuse_writepage_add()
unconditionally, only set data->wpa if the entry was added.
Fixes: 6b2fb79963fb ("fuse: optimize writepages search")
Reported-by: kernel test robot <rong.a.chen@intel.com>
Original-path-by: Vasily Averin <vvs@virtuozzo.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
|
|
In fuse_writepage_end() the old writepages entry needs to be removed from
the rbtree before inserting the new one, otherwise tree_insert() would
fail. This is a very rare codepath and no reproducer exists.
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs updates from David Sterba:
"This reverts the direct io port to iomap infrastructure of btrfs
merged in the first pull request. We found problems in invalidate page
that don't seem to be fixable as regressions or without changing iomap
code that would not affect other filesystems.
There are four reverts in total, but three of them are followup
cleanups needed to revert a43a67a2d715 cleanly. The result is the
buffer head based implementation of direct io.
Reverts are not great, but under current circumstances I don't see
better options"
* tag 'for-5.8-part2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
Revert "btrfs: switch to iomap_dio_rw() for dio"
Revert "fs: remove dio_end_io()"
Revert "btrfs: remove BTRFS_INODE_READDIO_NEED_LOCK"
Revert "btrfs: split btrfs_direct_IO to read and write part"
|
|
This reverts commit a43a67a2d715540c1368b9501a22b0373b5874c0.
This patch reverts the main part of switching direct io implementation
to iomap infrastructure. There's a problem in invalidate page that
couldn't be solved as regression in this development cycle.
The problem occurs when buffered and direct io are mixed, and the ranges
overlap. Although this is not recommended, filesystems implement
measures or fallbacks to make it somehow work. In this case, fallback to
buffered IO would be an option for btrfs (this already happens when
direct io is done on compressed data), but the change would be needed in
the iomap code, bringing new semantics to other filesystems.
Another problem arises when again the buffered and direct ios are mixed,
invalidation fails, then -EIO is set on the mapping and fsync will fail,
though there's no real error.
There have been discussions how to fix that, but revert seems to be the
least intrusive option.
Link: https://lore.kernel.org/linux-btrfs/20200528192103.xm45qoxqmkw7i5yl@fiona/
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Pull more cifs updates from Steve French:
"12 cifs/smb3 fixes, 2 for stable.
- add support for idsfromsid on create and chgrp/chown allowing
ability to save owner information more naturally for some workloads
- improve query info (getattr) when SMB3.1.1 posix extensions are
negotiated by using new query info level"
* tag '5.8-rc-smb3-fixes-part2' of git://git.samba.org/sfrench/cifs-2.6:
smb3: Add debug message for new file creation with idsfromsid mount option
cifs: fix chown and chgrp when idsfromsid mount option enabled
smb3: allow uid and gid owners to be set on create with idsfromsid mount option
smb311: Add tracepoints for new compound posix query info
smb311: add support for using info level for posix extensions query
smb311: Add support for lookup with posix extensions query info
smb311: Add support for SMB311 query info (non-compounded)
SMB311: Add support for query info using posix extensions (level 100)
smb3: add indatalen that can be a non-zero value to calculation of credit charge in smb2 ioctl
smb3: fix typo in mount options displayed in /proc/mounts
cifs: Add get_security_type_str function to return sec type.
smb3: extend fscache mount volume coherency check
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull more Kbuild updates from Masahiro Yamada:
- fix build rules in binderfs sample
- fix build errors when Kbuild recurses to the top Makefile
- covert '---help---' in Kconfig to 'help'
* tag 'kbuild-v5.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
treewide: replace '---help---' in Kconfig files with 'help'
kbuild: fix broken builds because of GZIP,BZIP2,LZOP variables
samples: binderfs: really compile this sample and fix build issues
|
|
Pull iomap fix from Darrick Wong:
"A single iomap bug fix for a variable type mistake on 32-bit
architectures, fixing an integer overflow problem in the unshare
actor"
* tag 'iomap-5.8-merge-1' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
iomap: Fix unsharing of an extent >2GB on a 32-bit machine
|
|
Pull xfs fix from Darrick Wong:
"We've settled down into the bugfix phase; this one fixes a resource
leak on an error bailout path"
* tag 'xfs-5.8-merge-9' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
xfs: Add the missed xfs_perag_put() for xfs_ifree_cluster()
|
|
Since commit 84af7a6194e4 ("checkpatch: kconfig: prefer 'help' over
'---help---'"), the number of '---help---' has been gradually
decreasing, but there are still more than 2400 instances.
This commit finishes the conversion. While I touched the lines,
I also fixed the indentation.
There are a variety of indentation styles found.
a) 4 spaces + '---help---'
b) 7 spaces + '---help---'
c) 8 spaces + '---help---'
d) 1 space + 1 tab + '---help---'
e) 1 tab + '---help---' (correct indentation)
f) 1 tab + 1 space + '---help---'
g) 1 tab + 2 spaces + '---help---'
In order to convert all of them to 1 tab + 'help', I ran the
following commend:
$ find . -name 'Kconfig*' | xargs sed -i 's/^[[:space:]]*---help---/\thelp/'
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs
Pull notification queue from David Howells:
"This adds a general notification queue concept and adds an event
source for keys/keyrings, such as linking and unlinking keys and
changing their attributes.
Thanks to Debarshi Ray, we do have a pull request to use this to fix a
problem with gnome-online-accounts - as mentioned last time:
https://gitlab.gnome.org/GNOME/gnome-online-accounts/merge_requests/47
Without this, g-o-a has to constantly poll a keyring-based kerberos
cache to find out if kinit has changed anything.
[ There are other notification pending: mount/sb fsinfo notifications
for libmount that Karel Zak and Ian Kent have been working on, and
Christian Brauner would like to use them in lxc, but let's see how
this one works first ]
LSM hooks are included:
- A set of hooks are provided that allow an LSM to rule on whether or
not a watch may be set. Each of these hooks takes a different
"watched object" parameter, so they're not really shareable. The
LSM should use current's credentials. [Wanted by SELinux & Smack]
- A hook is provided to allow an LSM to rule on whether or not a
particular message may be posted to a particular queue. This is
given the credentials from the event generator (which may be the
system) and the watch setter. [Wanted by Smack]
I've provided SELinux and Smack with implementations of some of these
hooks.
WHY
===
Key/keyring notifications are desirable because if you have your
kerberos tickets in a file/directory, your Gnome desktop will monitor
that using something like fanotify and tell you if your credentials
cache changes.
However, we also have the ability to cache your kerberos tickets in
the session, user or persistent keyring so that it isn't left around
on disk across a reboot or logout. Keyrings, however, cannot currently
be monitored asynchronously, so the desktop has to poll for it - not
so good on a laptop. This facility will allow the desktop to avoid the
need to poll.
DESIGN DECISIONS
================
- The notification queue is built on top of a standard pipe. Messages
are effectively spliced in. The pipe is opened with a special flag:
pipe2(fds, O_NOTIFICATION_PIPE);
The special flag has the same value as O_EXCL (which doesn't seem
like it will ever be applicable in this context)[?]. It is given up
front to make it a lot easier to prohibit splice&co from accessing
the pipe.
[?] Should this be done some other way? I'd rather not use up a new
O_* flag if I can avoid it - should I add a pipe3() system call
instead?
The pipe is then configured::
ioctl(fds[1], IOC_WATCH_QUEUE_SET_SIZE, queue_depth);
ioctl(fds[1], IOC_WATCH_QUEUE_SET_FILTER, &filter);
Messages are then read out of the pipe using read().
- It should be possible to allow write() to insert data into the
notification pipes too, but this is currently disabled as the
kernel has to be able to insert messages into the pipe *without*
holding pipe->mutex and the code to make this work needs careful
auditing.
- sendfile(), splice() and vmsplice() are disabled on notification
pipes because of the pipe->mutex issue and also because they
sometimes want to revert what they just did - but one or more
notification messages might've been interleaved in the ring.
- The kernel inserts messages with the wait queue spinlock held. This
means that pipe_read() and pipe_write() have to take the spinlock
to update the queue pointers.
- Records in the buffer are binary, typed and have a length so that
they can be of varying size.
This allows multiple heterogeneous sources to share a common
buffer; there are 16 million types available, of which I've used
just a few, so there is scope for others to be used. Tags may be
specified when a watchpoint is created to help distinguish the
sources.
- Records are filterable as types have up to 256 subtypes that can be
individually filtered. Other filtration is also available.
- Notification pipes don't interfere with each other; each may be
bound to a different set of watches. Any particular notification
will be copied to all the queues that are currently watching for it
- and only those that are watching for it.
- When recording a notification, the kernel will not sleep, but will
rather mark a queue as having lost a message if there's
insufficient space. read() will fabricate a loss notification
message at an appropriate point later.
- The notification pipe is created and then watchpoints are attached
to it, using one of:
keyctl_watch_key(KEY_SPEC_SESSION_KEYRING, fds[1], 0x01);
watch_mount(AT_FDCWD, "/", 0, fd, 0x02);
watch_sb(AT_FDCWD, "/mnt", 0, fd, 0x03);
where in both cases, fd indicates the queue and the number after is
a tag between 0 and 255.
- Watches are removed if either the notification pipe is destroyed or
the watched object is destroyed. In the latter case, a message will
be generated indicating the enforced watch removal.
Things I want to avoid:
- Introducing features that make the core VFS dependent on the
network stack or networking namespaces (ie. usage of netlink).
- Dumping all this stuff into dmesg and having a daemon that sits
there parsing the output and distributing it as this then puts the
responsibility for security into userspace and makes handling
namespaces tricky. Further, dmesg might not exist or might be
inaccessible inside a container.
- Letting users see events they shouldn't be able to see.
TESTING AND MANPAGES
====================
- The keyutils tree has a pipe-watch branch that has keyctl commands
for making use of notifications. Proposed manual pages can also be
found on this branch, though a couple of them really need to go to
the main manpages repository instead.
If the kernel supports the watching of keys, then running "make
test" on that branch will cause the testing infrastructure to spawn
a monitoring process on the side that monitors a notifications pipe
for all the key/keyring changes induced by the tests and they'll
all be checked off to make sure they happened.
https://git.kernel.org/pub/scm/linux/kernel/git/dhowells/keyutils.git/log/?h=pipe-watch
- A test program is provided (samples/watch_queue/watch_test) that
can be used to monitor for keyrings, mount and superblock events.
Information on the notifications is simply logged to stdout"
* tag 'notifications-20200601' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs:
smack: Implement the watch_key and post_notification hooks
selinux: Implement the watch_key security hook
keys: Make the KEY_NEED_* perms an enum rather than a mask
pipe: Add notification lossage handling
pipe: Allow buffers to be marked read-whole-or-error for notifications
Add sample notification program
watch_queue: Add a key/keyring notification facility
security: Add hooks to rule on setting a watch
pipe: Add general notification queue support
pipe: Add O_NOTIFICATION_PIPE
security: Add a hook for the point of notification insertion
uapi: General notification queue definitions
|
|
Pavel noticed that a debug message (disabled by default) in creating the security
descriptor context could be useful for new file creation owner fields
(as we already have for the mode) when using mount parm idsfromsid.
[38120.392272] CIFS: FYI: owner S-1-5-88-1-0, group S-1-5-88-2-0
[38125.792637] CIFS: FYI: owner S-1-5-88-1-1000, group S-1-5-88-2-1000
Also cleans up a typo in a comment
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace
Pull proc fix from Eric Biederman:
"Much to my surprise syzbot found a very old bug in proc that the
recent changes made easier to reproce. This bug is subtle enough it
looks like it fooled everyone who should know better"
* 'proc-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace:
proc: Use new_inode not new_inode_pseudo
|
|
Recently syzbot reported that unmounting proc when there is an ongoing
inotify watch on the root directory of proc could result in a use
after free when the watch is removed after the unmount of proc
when the watcher exits.
Commit 69879c01a0c3 ("proc: Remove the now unnecessary internal mount
of proc") made it easier to unmount proc and allowed syzbot to see the
problem, but looking at the code it has been around for a long time.
Looking at the code the fsnotify watch should have been removed by
fsnotify_sb_delete in generic_shutdown_super. Unfortunately the inode
was allocated with new_inode_pseudo instead of new_inode so the inode
was not on the sb->s_inodes list. Which prevented
fsnotify_unmount_inodes from finding the inode and removing the watch
as well as made it so the "VFS: Busy inodes after unmount" warning
could not find the inodes to warn about them.
Make all of the inodes in proc visible to generic_shutdown_super,
and fsnotify_sb_delete by using new_inode instead of new_inode_pseudo.
The only functional difference is that new_inode places the inodes
on the sb->s_inodes list.
I wrote a small test program and I can verify that without changes it
can trigger this issue, and by replacing new_inode_pseudo with
new_inode the issues goes away.
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/000000000000d788c905a7dfa3f4@google.com
Reported-by: syzbot+7d2debdcdb3cb93c1e5e@syzkaller.appspotmail.com
Fixes: 0097875bd415 ("proc: Implement /proc/thread-self to point at the directory of the current thread")
Fixes: 021ada7dff22 ("procfs: switch /proc/self away from proc_dir_entry")
Fixes: 51f0885e5415 ("vfs,proc: guarantee unique inodes in /proc")
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
|
|
idsfromsid was ignored in chown and chgrp causing it to fail
when upcalls were not configured for lookup. idsfromsid allows
mapping users when setting user or group ownership using
"special SID" (reserved for this). Add support for chmod and chgrp
when idsfromsid mount option is enabled.
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
|
|
Currently idsfromsid mount option allows querying owner information from the
special sids used to represent POSIX uids and gids but needed changes to
populate the security descriptor context with the owner information when
idsfromsid mount option was used.
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
|
|
Add dynamic tracepoints for new SMB3.1.1. posix extensions query info level (100)
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
|
|
Adds calls to the newer info level for query info using SMB3.1.1 posix extensions.
The remaining two places that call the older query info (non-SMB3.1.1 POSIX)
require passing in the fid and can be updated in a later patch.
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
|
|
Improve support for lookup when using SMB3.1.1 posix mounts.
Use new info level 100 (posix query info)
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
|
|
Add worker function for non-compounded SMB3.1.1 POSIX Extensions query info.
This is needed for revalidate of root (cached) directory for example.
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
|
|
Adds support for better query info on dentry revalidation (using
the SMB3.1.1 POSIX extensions level 100). Followon patch will
add support for translating the UID/GID from the SID and also
will add support for using the posix query info on lookup.
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
|
|
charge in smb2 ioctl
Some of tests in xfstests failed with cifsd kernel server since commit
e80ddeb2f70e. cifsd kernel server validates credit charge from client
by calculating it base on max((InputCount + OutputCount) and
(MaxInputResponse + MaxOutputResponse)) according to specification.
MS-SMB2 specification describe credit charge calculation of smb2 ioctl :
If Connection.SupportsMultiCredit is TRUE, the server MUST validate
CreditCharge based on the maximum of (InputCount + OutputCount) and
(MaxInputResponse + MaxOutputResponse), as specified in section 3.3.5.2.5.
If the validation fails, it MUST fail the IOCTL request with
STATUS_INVALID_PARAMETER.
This patch add indatalen that can be a non-zero value to calculation of
credit charge in SMB2_ioctl_init().
Fixes: e80ddeb2f70e ("smb3: fix incorrect number of credits when ioctl
MaxOutputResponse > 64K")
Cc: Stable <stable@vger.kernel.org>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
Cc: Steve French <smfrench@gmail.com>
Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Pull updates from Andrew Morton:
"A few fixes and stragglers.
Subsystems affected by this patch series: mm/memory-failure, ocfs2,
lib/lzo, misc"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
amdgpu: a NULL ->mm does not mean a thread is a kthread
lib/lzo: fix ambiguous encoding bug in lzo-rle
ocfs2: fix build failure when TCP/IP is disabled
mm/memory-failure: send SIGBUS(BUS_MCEERR_AR) only to current thread
mm/memory-failure: prioritize prctl(PR_MCE_KILL) over vm.memory_failure_early_kill
|
|
After commit 12abc5ee7873 ("tcp: add tcp_sock_set_nodelay") and commit
c488aeadcbd0 ("tcp: add tcp_sock_set_user_timeout"), building the kernel
with OCFS2_FS=y but without INET=y causes it to fail with:
ld: fs/ocfs2/cluster/tcp.o: in function `o2net_accept_many':
tcp.c:(.text+0x21b1): undefined reference to `tcp_sock_set_nodelay'
ld: tcp.c:(.text+0x21c1): undefined reference to `tcp_sock_set_user_timeout'
ld: fs/ocfs2/cluster/tcp.o: in function `o2net_start_connect':
tcp.c:(.text+0x2633): undefined reference to `tcp_sock_set_nodelay'
ld: tcp.c:(.text+0x2643): undefined reference to `tcp_sock_set_user_timeout'
This is due to tcp_sock_set_nodelay() and tcp_sock_set_user_timeout()
being declared in linux/tcp.h and defined in net/ipv4/tcp.c, which
depend on TCP/IP being enabled.
To fix this, make OCFS2_FS depend on INET=y which already requires
NET=y.
Fixes: 12abc5ee7873 ("tcp: add tcp_sock_set_nodelay")
Fixes: c488aeadcbd0 ("tcp: add tcp_sock_set_user_timeout")
Signed-off-by: Tom Seewald <tseewald@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Acked-by: Christoph Hellwig <hch@lst.de>
Cc: Sagi Grimberg <sagi@grimberg.me>
Cc: Jason Gunthorpe <jgg@mellanox.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Changwei Ge <gechangwei@live.cn>
Cc: Gang He <ghe@suse.com>
Cc: Jun Piao <piaojun@huawei.com>
Link: http://lkml.kernel.org/r/20200606190827.23954-1-tseewald@gmail.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Pull io_uring fixes from Jens Axboe:
"A few late stragglers in here. In particular:
- Validate full range for provided buffers (Bijan)
- Fix bad use of kfree() in buffer registration failure (Denis)
- Don't allow close of ring itself, it's not fully safe. Making it
fully safe would require making the system call more expensive,
which isn't worth it.
- Buffer selection fix
- Regression fix for O_NONBLOCK retry
- Make IORING_OP_ACCEPT honor O_NONBLOCK (Jiufei)
- Restrict opcode handling for SQ/IOPOLL (Pavel)
- io-wq work handling cleanups and improvements (Pavel, Xiaoguang)
- IOPOLL race fix (Xiaoguang)"
* tag 'io_uring-5.8-2020-06-11' of git://git.kernel.dk/linux-block:
io_uring: fix io_kiocb.flags modification race in IOPOLL mode
io_uring: check file O_NONBLOCK state for accept
io_uring: avoid unnecessary io_wq_work copy for fast poll feature
io_uring: avoid whole io_wq_work copy for requests completed inline
io_uring: allow O_NONBLOCK async retry
io_wq: add per-wq work handler instead of per work
io_uring: don't arm a timeout through work.func
io_uring: remove custom ->func handlers
io_uring: don't derive close state from ->func
io_uring: use kvfree() in io_sqe_buffer_register()
io_uring: validate the full range of provided buffers for access
io_uring: re-set iov base/len for buffer select retry
io_uring: move send/recv IOPOLL check into prep
io_uring: deduplicate io_openat{,2}_prep()
io_uring: do build_open_how() only once
io_uring: fix {SQ,IO}POLL with unsupported opcodes
io_uring: disallow close of ring itself
|
|
Fix afs_store_data() so that it sets the mtime in the new operation
descriptor otherwise the mtime on the server gets set to 0 when a write is
stored to the server.
Fixes: e49c7b2f6de7 ("afs: Build an abstraction around an "operation" concept")
Reported-by: Dave Botsch <botsch@cnf.cornell.edu>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Merge some more updates from Andrew Morton:
- various hotfixes and minor things
- hch's use_mm/unuse_mm clearnups
Subsystems affected by this patch series: mm/hugetlb, scripts, kcov,
lib, nilfs, checkpatch, lib, mm/debug, ocfs2, lib, misc.
* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
kernel: set USER_DS in kthread_use_mm
kernel: better document the use_mm/unuse_mm API contract
kernel: move use_mm/unuse_mm to kthread.c
kernel: move use_mm/unuse_mm to kthread.c
stacktrace: cleanup inconsistent variable type
lib: test get_count_order/long in test_bitops.c
mm: add comments on pglist_data zones
ocfs2: fix spelling mistake and grammar
mm/debug_vm_pgtable: fix kernel crash by checking for THP support
lib: fix bitmap_parse() on 64-bit big endian archs
checkpatch: correct check for kernel parameters doc
nilfs2: fix null pointer dereference at nilfs_segctor_do_construct()
lib/lz4/lz4_decompress.c: document deliberate use of `&'
kcov: check kcov_softirq in kcov_remote_stop()
scripts/spelling: add a few more typos
khugepaged: selftests: fix timeout condition in wait_for_scan()
|
|
Pull NFS client updates from Anna Schumaker:
"New features and improvements:
- Sunrpc receive buffer sizes only change when establishing a GSS credentials
- Add more sunrpc tracepoints
- Improve on tracepoints to capture internal NFS I/O errors
Other bugfixes and cleanups:
- Move a dprintk() to after a call to nfs_alloc_fattr()
- Fix off-by-one issues in rpc_ntop6
- Fix a few coccicheck warnings
- Use the correct SPDX license identifiers
- Fix rpc_call_done assignment for BIND_CONN_TO_SESSION
- Replace zero-length array with flexible array
- Remove duplicate headers
- Set invalid blocks after NFSv4 writes to update space_used attribute
- Fix direct WRITE throughput regression"
* tag 'nfs-for-5.8-1' of git://git.linux-nfs.org/projects/anna/linux-nfs: (27 commits)
NFS: Fix direct WRITE throughput regression
SUNRPC: rpc_xprt lifetime events should record xprt->state
xprtrdma: Make xprt_rdma_slot_table_entries static
nfs: set invalid blocks after NFSv4 writes
NFS: remove redundant initialization of variable result
sunrpc: add missing newline when printing parameter 'auth_hashtable_size' by sysfs
NFS: Add a tracepoint in nfs_set_pgio_error()
NFS: Trace short NFS READs
NFS: nfs_xdr_status should record the procedure name
SUNRPC: Set SOFTCONN when destroying GSS contexts
SUNRPC: rpc_call_null_helper() should set RPC_TASK_SOFT
SUNRPC: rpc_call_null_helper() already sets RPC_TASK_NULLCREDS
SUNRPC: trace RPC client lifetime events
SUNRPC: Trace transport lifetime events
SUNRPC: Split the xdr_buf event class
SUNRPC: Add tracepoint to rpc_call_rpcerror()
SUNRPC: Update the RPC_SHOW_SOCKET() macro
SUNRPC: Update the rpc_show_task_flags() macro
SUNRPC: Trace GSS context lifetimes
SUNRPC: receive buffer size estimation values almost never change
...
|
|
Pull DAX updates part three from Darrick Wong:
"Now that the xfs changes have landed, this third piece changes the
FS_XFLAG_DAX ioctl code in xfs to request that the inode be reloaded
after the last program closes the file, if doing so would make a S_DAX
change happen. The goal here is to make dax access mode switching
quicker when possible.
Summary:
- Teach XFS to ask the VFS to drop an inode if the administrator
changes the FS_XFLAG_DAX inode flag such that the S_DAX state would
change. This can result in files changing access modes without
requiring an unmount cycle"
* tag 'vfs-5.8-merge-3' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
fs/xfs: Update xfs_ioctl_setattr_dax_invalidate()
fs/xfs: Combine xfs_diflags_to_linux() and xfs_diflags_to_iflags()
fs/xfs: Create function xfs_inode_should_enable_dax()
fs/xfs: Make DAX mount option a tri-state
fs/xfs: Change XFS_MOUNT_DAX to XFS_MOUNT_DAX_ALWAYS
fs/xfs: Remove unnecessary initialization of i_rwsem
|
|
I measured a 50% throughput regression for large direct writes.
The observed on-the-wire behavior is that the client sends every
NFS WRITE twice: once as an UNSTABLE WRITE plus a COMMIT, and once
as a FILE_SYNC WRITE.
This is because the nfs_write_match_verf() check in
nfs_direct_commit_complete() fails for every WRITE.
Buffered writes use nfs_write_completion(), which sets req->wb_verf
correctly. Direct writes use nfs_direct_write_completion(), which
does not set req->wb_verf at all. This leaves req->wb_verf set to
all zeroes for every direct WRITE, and thus
nfs_direct_commit_completion() always sets NFS_ODIRECT_RESCHED_WRITES.
This fix appears to restore nearly all of the lost performance.
Fixes: 1f28476dcb98 ("NFS: Fix O_DIRECT commit verifier handling")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
|
|
Use the following command to test nfsv4(size of file1M is 1MB):
mount -t nfs -o vers=4.0,actimeo=60 127.0.0.1/dir1 /mnt
cp file1M /mnt
du -h /mnt/file1M -->0 within 60s, then 1M
When write is done(cp file1M /mnt), will call this:
nfs_writeback_done
nfs4_write_done
nfs4_write_done_cb
nfs_writeback_update_inode
nfs_post_op_update_inode_force_wcc_locked(change, ctime, mtime
nfs_post_op_update_inode_force_wcc_locked
nfs_set_cache_invalid
nfs_refresh_inode_locked
nfs_update_inode
nfsd write response contains change, ctime, mtime, the flag will be
clear after nfs_update_inode. Howerver, write response does not contain
space_used, previous open response contains space_used whose value is 0,
so inode->i_blocks is still 0.
nfs_getattr -->called by "du -h"
do_update |= force_sync || nfs_attribute_cache_expired -->false in 60s
cache_validity = READ_ONCE(NFS_I(inode)->cache_validity)
do_update |= cache_validity & (NFS_INO_INVALID_ATTR -->false
if (do_update) {
__nfs_revalidate_inode
}
Within 60s, does not send getattr request to nfsd, thus "du -h /mnt/file1M"
is 0.
Add a NFS_INO_INVALID_BLOCKS flag, set it when nfsv4 write is done.
Fixes: 16e143751727 ("NFS: More fine grained attribute tracking")
Signed-off-by: Zheng Bin <zhengbin13@huawei.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
|
|
The variable result is being initialized with a value that is never read
and it is being updated later with a new value. The initialization is
redundant and can be removed.
Addresses-Coverity: ("Unused value")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
|
|
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
|
|
A short read can generate an -EIO error without there being an error
on the wire. This tracepoint acts as an eyecatcher when there is no
obvious I/O error.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
|
|
When sunrpc trace points are not enabled, the recorded task ID
information alone is not helpful.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
|
|
Pull nfsd updates from Bruce Fields:
"Highlights:
- Keep nfsd clients from unnecessarily breaking their own
delegations.
Note this requires a small kthreadd addition. The result is Tejun
Heo's suggestion (see link), and he was OK with this going through
my tree.
- Patch nfsd/clients/ to display filenames, and to fix byte-order
when displaying stateid's.
- fix a module loading/unloading bug, from Neil Brown.
- A big series from Chuck Lever with RPC/RDMA and tracing
improvements, and lay some groundwork for RPC-over-TLS"
Link: https://lore.kernel.org/r/1588348912-24781-1-git-send-email-bfields@redhat.com
* tag 'nfsd-5.8' of git://linux-nfs.org/~bfields/linux: (49 commits)
sunrpc: use kmemdup_nul() in gssp_stringify()
nfsd: safer handling of corrupted c_type
nfsd4: make drc_slab global, not per-net
SUNRPC: Remove unreachable error condition in rpcb_getport_async()
nfsd: Fix svc_xprt refcnt leak when setup callback client failed
sunrpc: clean up properly in gss_mech_unregister()
sunrpc: svcauth_gss_register_pseudoflavor must reject duplicate registrations.
sunrpc: check that domain table is empty at module unload.
NFSD: Fix improperly-formatted Doxygen comments
NFSD: Squash an annoying compiler warning
SUNRPC: Clean up request deferral tracepoints
NFSD: Add tracepoints for monitoring NFSD callbacks
NFSD: Add tracepoints to the NFSD state management code
NFSD: Add tracepoints to NFSD's duplicate reply cache
SUNRPC: svc_show_status() macro should have enum definitions
SUNRPC: Restructure svc_udp_recvfrom()
SUNRPC: Refactor svc_recvfrom()
SUNRPC: Clean up svc_release_skb() functions
SUNRPC: Refactor recvfrom path dealing with incomplete TCP receives
SUNRPC: Replace dprintk() call sites in TCP receive path
...
|
|
While testing io_uring in arm, we found sometimes io_sq_thread() keeps
polling io requests even though there are not inflight io requests in
block layer. After some investigations, found a possible race about
io_kiocb.flags, see below race codes:
1) in the end of io_write() or io_read()
req->flags &= ~REQ_F_NEED_CLEANUP;
kfree(iovec);
return ret;
2) in io_complete_rw_iopoll()
if (res != -EAGAIN)
req->flags |= REQ_F_IOPOLL_COMPLETED;
In IOPOLL mode, io requests still maybe completed by interrupt, then
above codes are not safe, concurrent modifications to req->flags, which
is not protected by lock or is not atomic modifications. I also had
disassemble io_complete_rw_iopoll() in arm:
req->flags |= REQ_F_IOPOLL_COMPLETED;
0xffff000008387b18 <+76>: ldr w0, [x19,#104]
0xffff000008387b1c <+80>: orr w0, w0, #0x1000
0xffff000008387b20 <+84>: str w0, [x19,#104]
Seems that the "req->flags |= REQ_F_IOPOLL_COMPLETED;" is load and
modification, two instructions, which obviously is not atomic.
To fix this issue, add a new iopoll_completed in io_kiocb to indicate
whether io request is completed.
Signed-off-by: Xiaoguang Wang <xiaoguang.wang@linux.alibaba.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Some architectures like arm64 and s390 require USER_DS to be set for
kernel threads to access user address space, which is the whole purpose of
kthread_use_mm, but other like x86 don't. That has lead to a huge mess
where some callers are fixed up once they are tested on said
architectures, while others linger around and yet other like io_uring try
to do "clever" optimizations for what usually is just a trivial asignment
to a member in the thread_struct for most architectures.
Make kthread_use_mm set USER_DS, and kthread_unuse_mm restore to the
previous value instead.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Tested-by: Jens Axboe <axboe@kernel.dk>
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Felipe Balbi <balbi@kernel.org>
Cc: Felix Kuehling <Felix.Kuehling@amd.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Zhenyu Wang <zhenyuw@linux.intel.com>
Cc: Zhi Wang <zhi.a.wang@intel.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: http://lkml.kernel.org/r/20200404094101.672954-7-hch@lst.de
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Switch the function documentation to kerneldoc comments, and add
WARN_ON_ONCE asserts that the calling thread is a kernel thread and does
not have ->mm set (or has ->mm set in the case of unuse_mm).
Also give the functions a kthread_ prefix to better document the use case.
[hch@lst.de: fix a comment typo, cover the newly merged use_mm/unuse_mm caller in vfio]
Link: http://lkml.kernel.org/r/20200416053158.586887-3-hch@lst.de
[sfr@canb.auug.org.au: powerpc/vas: fix up for {un}use_mm() rename]
Link: http://lkml.kernel.org/r/20200422163935.5aa93ba5@canb.auug.org.au
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Tested-by: Jens Axboe <axboe@kernel.dk>
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Acked-by: Felix Kuehling <Felix.Kuehling@amd.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> [usb]
Acked-by: Haren Myneni <haren@linux.ibm.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Felipe Balbi <balbi@kernel.org>
Cc: Jason Wang <jasowang@redhat.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Zhenyu Wang <zhenyuw@linux.intel.com>
Cc: Zhi Wang <zhi.a.wang@intel.com>
Link: http://lkml.kernel.org/r/20200404094101.672954-6-hch@lst.de
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Patch series "improve use_mm / unuse_mm", v2.
This series improves the use_mm / unuse_mm interface by better documenting
the assumptions, and my taking the set_fs manipulations spread over the
callers into the core API.
This patch (of 3):
Use the proper API instead.
Link: http://lkml.kernel.org/r/20200404094101.672954-1-hch@lst.de
These helpers are only for use with kernel threads, and I will tie them
more into the kthread infrastructure going forward. Also move the
prototypes to kthread.h - mmu_context.h was a little weird to start with
as it otherwise contains very low-level MM bits.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Tested-by: Jens Axboe <axboe@kernel.dk>
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Acked-by: Felix Kuehling <Felix.Kuehling@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Felipe Balbi <balbi@kernel.org>
Cc: Jason Wang <jasowang@redhat.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Zhenyu Wang <zhenyuw@linux.intel.com>
Cc: Zhi Wang <zhi.a.wang@intel.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: http://lkml.kernel.org/r/20200404094101.672954-1-hch@lst.de
Link: http://lkml.kernel.org/r/20200416053158.586887-1-hch@lst.de
Link: http://lkml.kernel.org/r/20200404094101.672954-5-hch@lst.de
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
./ocfs2/mmap.c:65: bebongs ==> belonging
Signed-off-by: Keyur Patel <iamkeyur96@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Changwei Ge <gechangwei@live.cn>
Cc: Gang He <ghe@suse.com>
Cc: Jun Piao <piaojun@huawei.com>
Link: http://lkml.kernel.org/r/20200608014818.102358-1-iamkeyur96@gmail.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
After commit c3aab9a0bd91 ("mm/filemap.c: don't initiate writeback if
mapping has no dirty pages"), the following null pointer dereference has
been reported on nilfs2:
BUG: kernel NULL pointer dereference, address: 00000000000000a8
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
PGD 0 P4D 0
Oops: 0000 [#1] SMP PTI
...
RIP: 0010:percpu_counter_add_batch+0xa/0x60
...
Call Trace:
__test_set_page_writeback+0x2d3/0x330
nilfs_segctor_do_construct+0x10d3/0x2110 [nilfs2]
nilfs_segctor_construct+0x168/0x260 [nilfs2]
nilfs_segctor_thread+0x127/0x3b0 [nilfs2]
kthread+0xf8/0x130
...
This crash turned out to be caused by set_page_writeback() call for
segment summary buffers at nilfs_segctor_prepare_write().
set_page_writeback() can call inc_wb_stat(inode_to_wb(inode),
WB_WRITEBACK) where inode_to_wb(inode) is NULL if the inode of
underlying block device does not have an associated wb.
This fixes the issue by calling inode_attach_wb() in advance to ensure
to associate the bdev inode with its wb.
Fixes: c3aab9a0bd91 ("mm/filemap.c: don't initiate writeback if mapping has no dirty pages")
Reported-by: Walton Hoops <me@waltonhoops.com>
Reported-by: Tomas Hlavaty <tom@logand.com>
Reported-by: ARAI Shun-ichi <hermes@ceres.dti.ne.jp>
Reported-by: Hideki EIRAKU <hdk1983@gmail.com>
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Tested-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Cc: <stable@vger.kernel.org> [5.4+]
Link: http://lkml.kernel.org/r/20200608.011819.1399059588922299158.konishi.ryusuke@gmail.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull epoll update from Al Viro:
"epoll conversion to read_iter from Jens; I thought there might be more
epoll stuff this cycle, but uaccess took too much time"
* 'work.epoll' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
eventfd: convert to f_op->read_iter()
|
|
If the socket is O_NONBLOCK, we should complete the accept request
with -EAGAIN when data is not ready.
Signed-off-by: Jiufei Xue <jiufei.xue@linux.alibaba.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Basically IORING_OP_POLL_ADD command and async armed poll handlers
for regular commands don't touch io_wq_work, so only REQ_F_WORK_INITIALIZED
is set, can we do io_wq_work copy and restore.
Signed-off-by: Xiaoguang Wang <xiaoguang.wang@linux.alibaba.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
If requests can be submitted and completed inline, we don't need to
initialize whole io_wq_work in io_init_req(), which is an expensive
operation, add a new 'REQ_F_WORK_INITIALIZED' to determine whether
io_wq_work is initialized and add a helper io_req_init_async(), users
must call io_req_init_async() for the first time touching any members
of io_wq_work.
I use /dev/nullb0 to evaluate performance improvement in my physical
machine:
modprobe null_blk nr_devices=1 completion_nsec=0
sudo taskset -c 60 fio -name=fiotest -filename=/dev/nullb0 -iodepth=128
-thread -rw=read -ioengine=io_uring -direct=1 -bs=4k -size=100G -numjobs=1
-time_based -runtime=120
before this patch:
Run status group 0 (all jobs):
READ: bw=724MiB/s (759MB/s), 724MiB/s-724MiB/s (759MB/s-759MB/s),
io=84.8GiB (91.1GB), run=120001-120001msec
With this patch:
Run status group 0 (all jobs):
READ: bw=761MiB/s (798MB/s), 761MiB/s-761MiB/s (798MB/s-798MB/s),
io=89.2GiB (95.8GB), run=120001-120001msec
About 5% improvement.
Signed-off-by: Xiaoguang Wang <xiaoguang.wang@linux.alibaba.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|