summaryrefslogtreecommitdiff
path: root/fs
AgeCommit message (Collapse)AuthorFilesLines
2018-03-09Merge branch 'overlayfs-linus' of ↵Linus Torvalds6-68/+228
git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs Pull overlayfs fixes from Miklos Szeredi: "This fixes a corner case for NFS exporting (introduced in this cycle) as well as fixing miscellaneous bugs" * 'overlayfs-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs: ovl: update Kconfig texts ovl: redirect_dir=nofollow should not follow redirect for opaque lower ovl: fix ptr_ret.cocci warnings ovl: check ERR_PTR() return value from ovl_lookup_real() ovl: check lower ancestry on encode of lower dir file handle ovl: hash non-dir by lower inode for fsnotify
2018-03-09Merge tag 'xfs-4.16-fixes-3' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linuxLinus Torvalds1-12/+30
Pull xfs fixes from Darrick Wong: - Fix some iomap locking problems - Don't allocate cow blocks when we're zeroing file data * tag 'xfs-4.16-fixes-3' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux: xfs: don't block on the ilock for RWF_NOWAIT xfs: don't start out with the exclusive ilock for direct I/O xfs: don't allocate COW blocks for zeroing holes or unwritten extents
2018-03-07gfs2: Fixes to "Implement iomap for block_map" (2)Andreas Gruenbacher1-3/+0
It turns out that commit 3229c18c0d6b2 'Fixes to "Implement iomap for block_map"' introduced another bug in gfs2_iomap_begin that can cause gfs2_block_map to set bh->b_size of an actual buffer to 0. This can lead to arbitrary incorrect behavior including crashes or disk corruption. Revert the incorrect part of that commit. Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com> Signed-off-by: Bob Peterson <rpeterso@redhat.com>
2018-03-07ovl: update Kconfig textsMiklos Szeredi1-0/+14
Add some hints about overlayfs kernel config options. Enabling NFS export by default is especially recommended against, as it incurs a performance penalty even if the filesystem is not actually exported. Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2018-03-04Merge tag 'for-4.16-rc3-tag' of ↵Linus Torvalds10-47/+191
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux Pull btrfs fixes from David Sterba: - when NR_CPUS is large, a SRCU structure can significantly inflate size of the main filesystem structure that would not be possible to allocate by kmalloc, so the kvalloc fallback is used - improved error handling - fix endiannes when printing some filesystem attributes via sysfs, this is could happen when a filesystem is moved between different endianity hosts - send fixes: the NO_HOLE mode should not send a write operation for a file hole - fix log replay for for special files followed by file hardlinks - fix log replay failure after unlink and link combination - fix max chunk size calculation for DUP allocation * tag 'for-4.16-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: Btrfs: fix log replay failure after unlink and link combination Btrfs: fix log replay failure after linking special file and fsync Btrfs: send, fix issuing write op when processing hole in no data mode btrfs: use proper endianness accessors for super_copy btrfs: alloc_chunk: fix DUP stripe size handling btrfs: Handle btrfs_set_extent_delalloc failure in relocate_file_extent_cluster btrfs: handle failure of add_pending_csums btrfs: use kvzalloc to allocate btrfs_fs_info
2018-03-02Merge tag 'ceph-for-4.16-rc4' of git://github.com/ceph/ceph-clientLinus Torvalds4-38/+45
Pull ceph fixes from Ilya Dryomov: "A cap handling fix from Zhi that ensures that metadata writeback isn't delayed and three error path memory leak fixups from Chengguang" * tag 'ceph-for-4.16-rc4' of git://github.com/ceph/ceph-client: ceph: fix potential memory leak in init_caches() ceph: fix dentry leak when failing to init debugfs libceph, ceph: avoid memory leak when specifying same option several times ceph: flush dirty caps of unlinked inode ASAP
2018-03-02Merge tag 'for-linus-20180302' of git://git.kernel.dk/linux-blockLinus Torvalds2-19/+33
Pull block fixes from Jens Axboe: "A collection of fixes for this series. This is a little larger than usual at this time, but that's mainly because I was out on vacation last week. Nothing in here is major in any way, it's just two weeks of fixes. This contains: - NVMe pull from Keith, with a set of fixes from the usual suspects. - mq-deadline zone unlock fix from Damien, fixing an issue with the SMR zone locking added for 4.16. - two bcache fixes sent in by Michael, with changes from Coly and Tang. - comment typo fix from Eric for blktrace. - return-value error handling fix for nbd, from Gustavo. - fix a direct-io case where we don't defer to a completion handler, making us sleep from IRQ device completion. From Jan. - a small series from Jan fixing up holes around handling of bdev references. - small set of regression fixes from Jiufei, mostly fixing problems around the gendisk pointer -> partition index change. - regression fix from Ming, fixing a boundary issue with the discard page cache invalidation. - two-patch series from Ming, fixing both a core blk-mq-sched and kyber issue around token freeing on a requeue condition" * tag 'for-linus-20180302' of git://git.kernel.dk/linux-block: (24 commits) block: fix a typo block: display the correct diskname for bio block: fix the count of PGPGOUT for WRITE_SAME mq-deadline: Make sure to always unlock zones nvmet: fix PSDT field check in command format nvme-multipath: fix sysfs dangerously created links nbd: fix return value in error handling path bcache: fix kcrashes with fio in RAID5 backend dev bcache: correct flash only vols (check all uuids) blktrace_api.h: fix comment for struct blk_user_trace_setup blockdev: Avoid two active bdev inodes for one device genhd: Fix BUG in blkdev_open() genhd: Fix use after free in __blkdev_get() genhd: Add helper put_disk_and_module() genhd: Rename get_disk() to get_disk_and_module() genhd: Fix leaked module reference for NVME devices direct-io: Fix sleep in atomic due to sync AIO nvme-pci: Fix nvme queue cleanup if IRQ setup fails block: kyber: fix domain token leak during requeue blk-mq: don't call io sched's .requeue_request when requeueing rq to ->dispatch ...
2018-03-02xfs: don't block on the ilock for RWF_NOWAITChristoph Hellwig1-8/+19
Fix xfs_file_iomap_begin to trylock the ilock if IOMAP_NOWAIT is passed, so that we don't block io_submit callers. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2018-03-02xfs: don't start out with the exclusive ilock for direct I/OChristoph Hellwig1-4/+2
There is no reason to take the ilock exclusively at the start of xfs_file_iomap_begin for direct I/O, given that it will be demoted just before calling xfs_iomap_write_direct anyway. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2018-03-02xfs: don't allocate COW blocks for zeroing holes or unwritten extentsChristoph Hellwig1-1/+10
The iomap zeroing interface is smart enough to skip zeroing holes or unwritten extents. Don't subvert this logic for reflink files. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2018-03-01ceph: fix potential memory leak in init_caches()Chengguang Xu1-3/+6
There is lack of cache destroy operation for ceph_file_cachep when failing from fscache register. Signed-off-by: Chengguang Xu <cgxu519@icloud.com> Reviewed-by: Ilya Dryomov <idryomov@gmail.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2018-03-01Btrfs: fix log replay failure after unlink and link combinationFilipe Manana3-22/+139
If we have a file with 2 (or more) hard links in the same directory, remove one of the hard links, create a new file (or link an existing file) in the same directory with the name of the removed hard link, and then finally fsync the new file, we end up with a log that fails to replay, causing a mount failure. Example: $ mkfs.btrfs -f /dev/sdb $ mount /dev/sdb /mnt $ mkdir /mnt/testdir $ touch /mnt/testdir/foo $ ln /mnt/testdir/foo /mnt/testdir/bar $ sync $ unlink /mnt/testdir/bar $ touch /mnt/testdir/bar $ xfs_io -c "fsync" /mnt/testdir/bar <power failure> $ mount /dev/sdb /mnt mount: mount(2) failed: /mnt: No such file or directory When replaying the log, for that example, we also see the following in dmesg/syslog: [71813.671307] BTRFS info (device dm-0): failed to delete reference to bar, inode 258 parent 257 [71813.674204] ------------[ cut here ]------------ [71813.675694] BTRFS: Transaction aborted (error -2) [71813.677236] WARNING: CPU: 1 PID: 13231 at fs/btrfs/inode.c:4128 __btrfs_unlink_inode+0x17b/0x355 [btrfs] [71813.679669] Modules linked in: btrfs xfs f2fs dm_flakey dm_mod dax ghash_clmulni_intel ppdev pcbc aesni_intel aes_x86_64 crypto_simd cryptd glue_helper evdev psmouse i2c_piix4 parport_pc i2c_core pcspkr sg serio_raw parport button sunrpc loop autofs4 ext4 crc16 mbcache jbd2 zstd_decompress zstd_compress xxhash raid10 raid456 async_raid6_recov async_memcpy async_pq async_xor async_tx xor raid6_pq libcrc32c crc32c_generic raid1 raid0 multipath linear md_mod ata_generic sd_mod virtio_scsi ata_piix libata virtio_pci virtio_ring crc32c_intel floppy virtio e1000 scsi_mod [last unloaded: btrfs] [71813.679669] CPU: 1 PID: 13231 Comm: mount Tainted: G W 4.15.0-rc9-btrfs-next-56+ #1 [71813.679669] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.10.2-0-g5f4c7b1-prebuilt.qemu-project.org 04/01/2014 [71813.679669] RIP: 0010:__btrfs_unlink_inode+0x17b/0x355 [btrfs] [71813.679669] RSP: 0018:ffffc90001cef738 EFLAGS: 00010286 [71813.679669] RAX: 0000000000000025 RBX: ffff880217ce4708 RCX: 0000000000000001 [71813.679669] RDX: 0000000000000000 RSI: ffffffff81c14bae RDI: 00000000ffffffff [71813.679669] RBP: ffffc90001cef7c0 R08: 0000000000000001 R09: 0000000000000001 [71813.679669] R10: ffffc90001cef5e0 R11: ffffffff8343f007 R12: ffff880217d474c8 [71813.679669] R13: 00000000fffffffe R14: ffff88021ccf1548 R15: 0000000000000101 [71813.679669] FS: 00007f7cee84c480(0000) GS:ffff88023fc80000(0000) knlGS:0000000000000000 [71813.679669] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [71813.679669] CR2: 00007f7cedc1abf9 CR3: 00000002354b4003 CR4: 00000000001606e0 [71813.679669] Call Trace: [71813.679669] btrfs_unlink_inode+0x17/0x41 [btrfs] [71813.679669] drop_one_dir_item+0xfa/0x131 [btrfs] [71813.679669] add_inode_ref+0x71e/0x851 [btrfs] [71813.679669] ? __lock_is_held+0x39/0x71 [71813.679669] ? replay_one_buffer+0x53/0x53a [btrfs] [71813.679669] replay_one_buffer+0x4a4/0x53a [btrfs] [71813.679669] ? rcu_read_unlock+0x3a/0x57 [71813.679669] ? __lock_is_held+0x39/0x71 [71813.679669] walk_up_log_tree+0x101/0x1d2 [btrfs] [71813.679669] walk_log_tree+0xad/0x188 [btrfs] [71813.679669] btrfs_recover_log_trees+0x1fa/0x31e [btrfs] [71813.679669] ? replay_one_extent+0x544/0x544 [btrfs] [71813.679669] open_ctree+0x1cf6/0x2209 [btrfs] [71813.679669] btrfs_mount_root+0x368/0x482 [btrfs] [71813.679669] ? trace_hardirqs_on_caller+0x14c/0x1a6 [71813.679669] ? __lockdep_init_map+0x176/0x1c2 [71813.679669] ? mount_fs+0x64/0x10b [71813.679669] mount_fs+0x64/0x10b [71813.679669] vfs_kern_mount+0x68/0xce [71813.679669] btrfs_mount+0x13e/0x772 [btrfs] [71813.679669] ? trace_hardirqs_on_caller+0x14c/0x1a6 [71813.679669] ? __lockdep_init_map+0x176/0x1c2 [71813.679669] ? mount_fs+0x64/0x10b [71813.679669] mount_fs+0x64/0x10b [71813.679669] vfs_kern_mount+0x68/0xce [71813.679669] do_mount+0x6e5/0x973 [71813.679669] ? memdup_user+0x3e/0x5c [71813.679669] SyS_mount+0x72/0x98 [71813.679669] entry_SYSCALL_64_fastpath+0x1e/0x8b [71813.679669] RIP: 0033:0x7f7cedf150ba [71813.679669] RSP: 002b:00007ffca71da688 EFLAGS: 00000206 [71813.679669] Code: 7f a0 e8 51 0c fd ff 48 8b 43 50 f0 0f ba a8 30 2c 00 00 02 72 17 41 83 fd fb 74 11 44 89 ee 48 c7 c7 7d 11 7f a0 e8 38 f5 8d e0 <0f> ff 44 89 e9 ba 20 10 00 00 eb 4d 48 8b 4d b0 48 8b 75 88 4c [71813.679669] ---[ end trace 83bd473fc5b4663b ]--- [71813.854764] BTRFS: error (device dm-0) in __btrfs_unlink_inode:4128: errno=-2 No such entry [71813.886994] BTRFS: error (device dm-0) in btrfs_replay_log:2307: errno=-2 No such entry (Failed to recover log tree) [71813.903357] BTRFS error (device dm-0): cleaner transaction attach returned -30 [71814.128078] BTRFS error (device dm-0): open_ctree failed This happens because the log has inode reference items for both inode 258 (the first file we created) and inode 259 (the second file created), and when processing the reference item for inode 258, we replace the corresponding item in the subvolume tree (which has two names, "foo" and "bar") witht he one in the log (which only has one name, "foo") without removing the corresponding dir index keys from the parent directory. Later, when processing the inode reference item for inode 259, which has a name of "bar" associated to it, we notice that dir index entries exist for that name and for a different inode, so we attempt to unlink that name, which fails because the inode reference item for inode 258 no longer has the name "bar" associated to it, making a call to btrfs_unlink_inode() fail with a -ENOENT error. Fix this by unlinking all the names in an inode reference item from a subvolume tree that are not present in the inode reference item found in the log tree, before overwriting it with the item from the log tree. Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2018-03-01Btrfs: fix log replay failure after linking special file and fsyncFilipe Manana1-1/+1
If in the same transaction we rename a special file (fifo, character/block device or symbolic link), create a hard link for it having its old name then sync the log, we will end up with a log that can not be replayed and at when attempting to replay it, an EEXIST error is returned and mounting the filesystem fails. Example scenario: $ mkfs.btrfs -f /dev/sdc $ mount /dev/sdc /mnt $ mkdir /mnt/testdir $ mkfifo /mnt/testdir/foo # Make sure everything done so far is durably persisted. $ sync # Create some unrelated file and fsync it, this is just to create a log # tree. The file must be in the same directory as our special file. $ touch /mnt/testdir/f1 $ xfs_io -c "fsync" /mnt/testdir/f1 # Rename our special file and then create a hard link with its old name. $ mv /mnt/testdir/foo /mnt/testdir/bar $ ln /mnt/testdir/bar /mnt/testdir/foo # Create some other unrelated file and fsync it, this is just to persist # the log tree which was modified by the previous rename and link # operations. Alternatively we could have modified file f1 and fsync it. $ touch /mnt/f2 $ xfs_io -c "fsync" /mnt/f2 <power failure> $ mount /dev/sdc /mnt mount: mount /dev/sdc on /mnt failed: File exists This happens because when both the log tree and the subvolume's tree have an entry in the directory "testdir" with the same name, that is, there is one key (258 INODE_REF 257) in the subvolume tree and another one in the log tree (where 258 is the inode number of our special file and 257 is the inode for directory "testdir"). Only the data of those two keys differs, in the subvolume tree the index field for inode reference has a value of 3 while the log tree it has a value of 5. Because the same key exists in both trees, but have different index, the log replay fails with an -EEXIST error when attempting to replay the inode reference from the log tree. Fix this by setting the last_unlink_trans field of the inode (our special file) to the current transaction id when a hard link is created, as this forces logging the parent directory inode, solving the conflict at log replay time. A new generic test case for fstests was also submitted. Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2018-03-01Btrfs: send, fix issuing write op when processing hole in no data modeFilipe Manana1-0/+3
When doing an incremental send of a filesystem with the no-holes feature enabled, we end up issuing a write operation when using the no data mode send flag, instead of issuing an update extent operation. Fix this by issuing the update extent operation instead. Trivial reproducer: $ mkfs.btrfs -f -O no-holes /dev/sdc $ mkfs.btrfs -f /dev/sdd $ mount /dev/sdc /mnt/sdc $ mount /dev/sdd /mnt/sdd $ xfs_io -f -c "pwrite -S 0xab 0 32K" /mnt/sdc/foobar $ btrfs subvolume snapshot -r /mnt/sdc /mnt/sdc/snap1 $ xfs_io -c "fpunch 8K 8K" /mnt/sdc/foobar $ btrfs subvolume snapshot -r /mnt/sdc /mnt/sdc/snap2 $ btrfs send /mnt/sdc/snap1 | btrfs receive /mnt/sdd $ btrfs send --no-data -p /mnt/sdc/snap1 /mnt/sdc/snap2 \ | btrfs receive -vv /mnt/sdd Before this change the output of the second receive command is: receiving snapshot snap2 uuid=f6922049-8c22-e544-9ff9-fc6755918447... utimes write foobar, offset 8192, len 8192 utimes foobar BTRFS_IOC_SET_RECEIVED_SUBVOL uuid=f6922049-8c22-e544-9ff9-... After this change it is: receiving snapshot snap2 uuid=564d36a3-ebc8-7343-aec9-bf6fda278e64... utimes update_extent foobar: offset=8192, len=8192 utimes foobar BTRFS_IOC_SET_RECEIVED_SUBVOL uuid=564d36a3-ebc8-7343-aec9-bf6fda278e64... Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2018-03-01btrfs: use proper endianness accessors for super_copyAnand Jain2-13/+15
The fs_info::super_copy is a byte copy of the on-disk structure and all members must use the accessor macros/functions to obtain the right value. This was missing in update_super_roots and in sysfs readers. Moving between opposite endianness hosts will report bogus numbers in sysfs, and mount may fail as the root will not be restored correctly. If the filesystem is always used on a same endian host, this will not be a problem. Fix this by using the btrfs_set_super...() functions to set fs_info::super_copy values, and for the sysfs, use the cached fs_info::nodesize/sectorsize values. CC: stable@vger.kernel.org Fixes: df93589a17378 ("btrfs: export more from FS_INFO to sysfs") Signed-off-by: Anand Jain <anand.jain@oracle.com> Reviewed-by: Liu Bo <bo.li.liu@oracle.com> Reviewed-by: David Sterba <dsterba@suse.com> [ update changelog ] Signed-off-by: David Sterba <dsterba@suse.com>
2018-03-01btrfs: alloc_chunk: fix DUP stripe size handlingHans van Kranenburg1-5/+6
In case of using DUP, we search for enough unallocated disk space on a device to hold two stripes. The devices_info[ndevs-1].max_avail that holds the amount of unallocated space found is directly assigned to stripe_size, while it's actually twice the stripe size. Later on in the code, an unconditional division of stripe_size by dev_stripes corrects the value, but in the meantime there's a check to see if the stripe_size does not exceed max_chunk_size. Since during this check stripe_size is twice the amount as intended, the check will reduce the stripe_size to max_chunk_size if the actual correct to be used stripe_size is more than half the amount of max_chunk_size. The unconditional division later tries to correct stripe_size, but will actually make sure we can't allocate more than half the max_chunk_size. Fix this by moving the division by dev_stripes before the max chunk size check, so it always contains the right value, instead of putting a duct tape division in further on to get it fixed again. Since in all other cases than DUP, dev_stripes is 1, this change only affects DUP. Other attempts in the past were made to fix this: * 37db63a400 "Btrfs: fix max chunk size check in chunk allocator" tried to fix the same problem, but still resulted in part of the code acting on a wrongly doubled stripe_size value. * 86db25785a "Btrfs: fix max chunk size on raid5/6" unintentionally broke this fix again. The real problem was already introduced with the rest of the code in 73c5de0051. The user visible result however will be that the max chunk size for DUP will suddenly double, while it's actually acting according to the limits in the code again like it was 5 years ago. Reported-by: Naohiro Aota <naohiro.aota@wdc.com> Link: https://www.spinics.net/lists/linux-btrfs/msg69752.html Fixes: 73c5de0051 ("btrfs: quasi-round-robin for chunk allocation") Fixes: 86db25785a ("Btrfs: fix max chunk size on raid5/6") Signed-off-by: Hans van Kranenburg <hans.van.kranenburg@mendix.com> Reviewed-by: David Sterba <dsterba@suse.com> [ update comment ] Signed-off-by: David Sterba <dsterba@suse.com>
2018-03-01btrfs: Handle btrfs_set_extent_delalloc failure in relocate_file_extent_clusterNikolay Borisov1-2/+16
Essentially duplicate the error handling from the above block which handles the !PageUptodate(page) case and additionally clear EXTENT_BOUNDARY. Signed-off-by: Nikolay Borisov <nborisov@suse.com> Reviewed-by: Josef Bacik <jbacik@fb.com> Signed-off-by: David Sterba <dsterba@suse.com>
2018-03-01btrfs: handle failure of add_pending_csumsNikolay Borisov1-2/+9
add_pending_csums was added as part of the new data=ordered implementation in e6dcd2dc9c48 ("Btrfs: New data=ordered implementation"). Even back then it called the btrfs_csum_file_blocks which can fail but it never bothered handling the failure. In ENOMEM situation this could lead to the filesystem failing to write the checksums for a particular extent and not detect this. On read this could lead to the filesystem erroring out due to crc mismatch. Fix it by propagating failure from add_pending_csums and handling them. Signed-off-by: Nikolay Borisov <nborisov@suse.com> Reviewed-by: Josef Bacik <jbacik@fb.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2018-03-01btrfs: use kvzalloc to allocate btrfs_fs_infoJeff Mahoney2-2/+2
The srcu_struct in btrfs_fs_info scales in size with NR_CPUS. On kernels built with NR_CPUS=8192, this can result in kmalloc failures that prevent mounting. There is work in progress to try to resolve this for every user of srcu_struct but using kvzalloc will work around the failures until that is complete. As an example with NR_CPUS=512 on x86_64: the overall size of subvol_srcu is 3460 bytes, fs_info is 6496. Signed-off-by: Jeff Mahoney <jeffm@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2018-02-28Merge tag 'xfs-4.16-fixes-2' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linuxLinus Torvalds4-5/+13
Pull xfs fixes from Darrick Wong: - fix some compiler warnings - fix block reservations for transactions created during log recovery - fix resource leaks when respecifying mount options * tag 'xfs-4.16-fixes-2' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux: xfs: fix potential memory leak in mount option parsing xfs: reserve blocks for refcount / rmap log item recovery xfs: use memset to initialize xfs_scrub_agfl_info
2018-02-26xfs: fix potential memory leak in mount option parsingChengguang Xu1-0/+2
When specifying string type mount option (e.g., logdev) several times in a mount, current option parsing may cause memory leak. Hence, call kfree for previous one in this case. Signed-off-by: Chengguang Xu <cgxu519@icloud.com> Reviewed-by: Eric Sandeen <sandeen@redhat.com> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2018-02-26blockdev: Avoid two active bdev inodes for one deviceJan Kara1-2/+23
When blkdev_open() races with device removal and creation it can happen that unhashed bdev inode gets associated with newly created gendisk like: CPU0 CPU1 blkdev_open() bdev = bd_acquire() del_gendisk() bdev_unhash_inode(bdev); remove device create new device with the same number __blkdev_get() disk = get_gendisk() - gets reference to gendisk of the new device Now another blkdev_open() will not find original 'bdev' as it got unhashed, create a new one and associate it with the same 'disk' at which point problems start as we have two independent page caches for one device. Fix the problem by verifying that the bdev inode didn't get unhashed before we acquired gendisk reference. That way we make sure gendisk can get associated only with visible bdev inodes. Tested-by: Hou Tao <houtao1@huawei.com> Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-02-26genhd: Fix use after free in __blkdev_get()Jan Kara1-2/+5
When two blkdev_open() calls race with device removal and recreation, __blkdev_get() can use looked up gendisk after it is freed: CPU0 CPU1 CPU2 del_gendisk(disk); bdev_unhash_inode(inode); blkdev_open() blkdev_open() bdev = bd_acquire(inode); - creates and returns new inode bdev = bd_acquire(inode); - returns the same inode __blkdev_get(devt) __blkdev_get(devt) disk = get_gendisk(devt); - got structure of device going away <finish device removal> <new device gets created under the same device number> disk = get_gendisk(devt); - got new device structure if (!bdev->bd_openers) { does the first open } if (!bdev->bd_openers) - false } else { put_disk_and_module(disk) - remember this was old device - this was last ref and disk is now freed } disk_unblock_events(disk); -> oops Fix the problem by making sure we drop reference to disk in __blkdev_get() only after we are really done with it. Reported-by: Hou Tao <houtao1@huawei.com> Tested-by: Hou Tao <houtao1@huawei.com> Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-02-26genhd: Add helper put_disk_and_module()Jan Kara1-14/+5
Add a proper counterpart to get_disk_and_module() - put_disk_and_module(). Currently it is opencoded in several places. Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-02-26direct-io: Fix sleep in atomic due to sync AIOJan Kara1-2/+1
Commit e864f39569f4 "fs: add RWF_DSYNC aand RWF_SYNC" added additional way for direct IO to become synchronous and thus trigger fsync from the IO completion handler. Then commit 9830f4be159b "fs: Use RWF_* flags for AIO operations" allowed these flags to be set for AIO as well. However that commit forgot to update the condition checking whether the IO completion handling should be defered to a workqueue and thus AIO DIO with RWF_[D]SYNC set will call fsync() from IRQ context resulting in sleep in atomic. Fix the problem by checking directly iocb flags (the same way as it is done in dio_complete()) instead of checking all conditions that could lead to IO being synchronous. CC: Christoph Hellwig <hch@lst.de> CC: Goldwyn Rodrigues <rgoldwyn@suse.com> CC: stable@vger.kernel.org Reported-by: Mark Rutland <mark.rutland@arm.com> Tested-by: Mark Rutland <mark.rutland@arm.com> Fixes: 9830f4be159b29399d107bffb99e0132bc5aedd4 Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-02-26ovl: redirect_dir=nofollow should not follow redirect for opaque lowerVivek Goyal1-3/+3
redirect_dir=nofollow should not follow a redirect. But in a specific configuration it can still follow it. For example try this. $ mkdir -p lower0 lower1/foo upper work merged $ touch lower1/foo/lower-file.txt $ setfattr -n "trusted.overlay.opaque" -v "y" lower1/foo $ mount -t overlay -o lowerdir=lower1:lower0,workdir=work,upperdir=upper,redirect_dir=on none merged $ cd merged $ mv foo foo-renamed $ umount merged # mount again. This time with redirect_dir=nofollow $ mount -t overlay -o lowerdir=lower1:lower0,workdir=work,upperdir=upper,redirect_dir=nofollow none merged $ ls merged/foo-renamed/ # This lists lower-file.txt, while it should not have. Basically, we are doing redirect check after we check for d.stop. And if this is not last lower, and we find an opaque lower, d.stop will be set. ovl_lookup_single() if (!d->last && ovl_is_opaquedir(this)) { d->stop = d->opaque = true; goto out; } To fix this, first check redirect is allowed. And after that check if d.stop has been set or not. Signed-off-by: Vivek Goyal <vgoyal@redhat.com> Fixes: 438c84c2f0c7 ("ovl: don't follow redirects if redirect_dir=off") Cc: <stable@vger.kernel.org> #v4.15 Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2018-02-26ceph: fix dentry leak when failing to init debugfsChengguang Xu1-11/+5
When failing from ceph_fs_debugfs_init() in ceph_real_mount(), there is lack of dput of root_dentry and it causes slab errors, so change the calling order of ceph_fs_debugfs_init() and open_root_dentry() and do some cleanups to avoid this issue. Signed-off-by: Chengguang Xu <cgxu519@icloud.com> Reviewed-by: "Yan, Zheng" <zyan@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2018-02-26libceph, ceph: avoid memory leak when specifying same option several timesChengguang Xu1-0/+2
When parsing string option, in order to avoid memory leak we need to carefully free it first in case of specifying same option several times. Signed-off-by: Chengguang Xu <cgxu519@icloud.com> Reviewed-by: Ilya Dryomov <idryomov@gmail.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2018-02-26ceph: flush dirty caps of unlinked inode ASAPZhi Zhang3-24/+32
Client should release unlinked inode from its cache ASAP. But client can't release inode with dirty caps. Link: http://tracker.ceph.com/issues/22886 Signed-off-by: Zhi Zhang <zhang.david2011@gmail.com> Reviewed-by: "Yan, Zheng" <zyan@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2018-02-26ovl: fix ptr_ret.cocci warningsFengguang Wu1-1/+1
fs/overlayfs/export.c:459:10-16: WARNING: PTR_ERR_OR_ZERO can be used Use PTR_ERR_OR_ZERO rather than if(IS_ERR(...)) + PTR_ERR Generated by: scripts/coccinelle/api/ptr_ret.cocci Fixes: 4b91c30a5a19 ("ovl: lookup connected ancestor of dir in inode cache") CC: Amir Goldstein <amir73il@gmail.com> Signed-off-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2018-02-26Merge tag 'nfs-for-4.16-3' of git://git.linux-nfs.org/projects/trondmy/linux-nfsLinus Torvalds3-11/+11
Pull NFS client bugfixes from Trond Myklebust: - fix a broken cast in nfs4_callback_recallany() - fix an Oops during NFSv4 migration events - make struct nlmclnt_fl_close_lock_ops static * tag 'nfs-for-4.16-3' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: NFS: make struct nlmclnt_fl_close_lock_ops static nfs: system crashes after NFS4ERR_MOVED recovery NFSv4: Fix broken cast in nfs4_callback_recallany()
2018-02-23Merge branch 'siginfo-linus' of ↵Linus Torvalds1-3/+12
git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace Pull siginfo fix from Eric Biederman: "This fixes a build error that only shows up on blackfin" * 'siginfo-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace: fs/signalfd: fix build error for BUS_MCEERR_AR
2018-02-23xfs: reserve blocks for refcount / rmap log item recoveryDarrick J. Wong2-4/+9
During log recovery, the per-AG reservations aren't yet set up, so log recovery has to reserve enough blocks to handle all possible btree splits. Reported-by: Dave Chinner <david@fromorbit.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Dave Chinner <dchinner@redhat.com>
2018-02-23xfs: use memset to initialize xfs_scrub_agfl_infoEric Sandeen1-1/+2
Apparently different gcc versions have competing and incompatible notions of how to initialize at declaration, so just give up and fall back to the time-tested memset(). Signed-off-by: Eric Sandeen <sandeen@redhat.com> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2018-02-23fs/signalfd: fix build error for BUS_MCEERR_ARRandy Dunlap1-3/+12
Fix build error in fs/signalfd.c by using same method that is used in kernel/signal.c: separate blocks for different signal si_code values. ./fs/signalfd.c: error: 'BUS_MCEERR_AR' undeclared (first use in this function) Reported-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
2018-02-22efivarfs: Limit the rate for non-root to read filesLuck, Tony1-0/+6
Each read from a file in efivarfs results in two calls to EFI (one to get the file size, another to get the actual data). On X86 these EFI calls result in broadcast system management interrupts (SMI) which affect performance of the whole system. A malicious user can loop performing reads from efivarfs bringing the system to its knees. Linus suggested per-user rate limit to solve this. So we add a ratelimit structure to "user_struct" and initialize it for the root user for no limit. When allocating user_struct for other users we set the limit to 100 per second. This could be used for other places that want to limit the rate of some detrimental user action. In efivarfs if the limit is exceeded when reading, we take an interruptible nap for 50ms and check the rate limit again. Signed-off-by: Tony Luck <tony.luck@intel.com> Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-02-22NFS: make struct nlmclnt_fl_close_lock_ops staticColin Ian King1-1/+1
The structure nlmclnt_fl_close_lock_ops s local to the source and does not need to be in global scope, so make it static. Cleans up sparse warning: fs/nfs/nfs3proc.c:876:33: warning: symbol 'nlmclnt_fl_close_lock_ops' was not declared. Should it be static? Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2018-02-22nfs: system crashes after NFS4ERR_MOVED recoveryBill.Baker@oracle.com1-2/+4
nfs4_update_server unconditionally releases the nfs_client for the source server. If migration fails, this can cause the source server's nfs_client struct to be left with a low reference count, resulting in use-after-free. Also, adjust reference count handling for ELOOP. NFS: state manager: migration failed on NFSv4 server nfsvmu10 with error 6 WARNING: CPU: 16 PID: 17960 at fs/nfs/client.c:281 nfs_put_client+0xfa/0x110 [nfs]() nfs_put_client+0xfa/0x110 [nfs] nfs4_run_state_manager+0x30/0x40 [nfsv4] kthread+0xd8/0xf0 BUG: unable to handle kernel NULL pointer dereference at 00000000000002a8 nfs4_xdr_enc_write+0x6b/0x160 [nfsv4] rpcauth_wrap_req+0xac/0xf0 [sunrpc] call_transmit+0x18c/0x2c0 [sunrpc] __rpc_execute+0xa6/0x490 [sunrpc] rpc_async_schedule+0x15/0x20 [sunrpc] process_one_work+0x160/0x470 worker_thread+0x112/0x540 ? rescuer_thread+0x3f0/0x3f0 kthread+0xd8/0xf0 This bug was introduced by 32e62b7c ("NFS: Add nfs4_update_server"), but the fix applies cleanly to 52442f9b ("NFS4: Avoid migration loops") Reported-by: Helen Chao <helen.chao@oracle.com> Fixes: 52442f9b11b7 ("NFS4: Avoid migration loops") Signed-off-by: Bill Baker <bill.baker@oracle.com> Reviewed-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2018-02-22NFSv4: Fix broken cast in nfs4_callback_recallany()Trond Myklebust1-8/+6
Passing a pointer to a unsigned integer to test_bit() is broken. Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2018-02-16Merge tag 'for-4.16-rc1-tag' of ↵Linus Torvalds7-21/+80
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux Pull btrfs fixes from David Sterba: "We have a few assorted fixes, some of them show up during fstests so I gave them more testing" * tag 'for-4.16-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: btrfs: Fix use-after-free when cleaning up fs_devs with a single stale device Btrfs: fix null pointer dereference when replacing missing device btrfs: remove spurious WARN_ON(ref->count < 0) in find_parent_nodes btrfs: Ignore errors from btrfs_qgroup_trace_extent_post Btrfs: fix unexpected -EEXIST when creating new inode Btrfs: fix use-after-free on root->orphan_block_rsv Btrfs: fix btrfs_evict_inode to handle abnormal inodes correctly Btrfs: fix extent state leak from tree log Btrfs: fix crash due to not cleaning up tree log block's dirty bits Btrfs: fix deadlock in run_delalloc_nocow
2018-02-16ovl: check ERR_PTR() return value from ovl_lookup_real()Amir Goldstein1-2/+2
Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Fixes: 061701540349 ("ovl: lookup indexed ancestor of lower dir") Signed-off-by: Amir Goldstein <amir73il@gmail.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2018-02-16ovl: check lower ancestry on encode of lower dir file handleAmir Goldstein3-44/+168
This change relaxes copy up on encode of merge dir with lower layer > 1 and handles the case of encoding a merge dir with lower layer 1, where an ancestor is a non-indexed merge dir. In that case, decode of the lower file handle will not have been possible if the non-indexed ancestor is redirected before or after encode. Before encoding a non-upper directory file handle from real layer N, we need to check if it will be possible to reconnect an overlay dentry from the real lower decoded dentry. This is done by following the overlay ancestry up to a "layer N connected" ancestor and verifying that all parents along the way are "layer N connectable". If an ancestor that is NOT "layer N connectable" is found, we need to copy up an ancestor, which is "layer N connectable", thus making that ancestor "layer N connected". For example: layer 1: /a layer 2: /a/b/c The overlay dentry /a is NOT "layer 2 connectable", because if dir /a is copied up and renamed, upper dir /a will be indexed by lower dir /a from layer 1. The dir /a from layer 2 will never be indexed, so the algorithm in ovl_lookup_real_ancestor() (*) will not be able to lookup a connected overlay dentry from the connected lower dentry /a/b/c. To avoid this problem on decode time, we need to copy up an ancestor of /a/b/c, which is "layer 2 connectable", on encode time. That ancestor is /a/b. After copy up (and index) of /a/b, it will become "layer 2 connected" and when the time comes to decode the file handle from lower dentry /a/b/c, ovl_lookup_real_ancestor() will find the indexed ancestor /a/b and decoding a connected overlay dentry will be accomplished. (*) the algorithm in ovl_lookup_real_ancestor() can be improved to lookup an entry /a in the lower layers above layer N and find the indexed dir /a from layer 1. If that improvement is made, then the check for "layer N connected" will need to verify there are no redirects in lower layers above layer N. In the example above, /a will be "layer 2 connectable". However, if layer 2 dir /a is a target of a layer 1 redirect, then /a will NOT be "layer 2 connectable": layer 1: /A (redirect = /a) layer 2: /a/b/c Signed-off-by: Amir Goldstein <amir73il@gmail.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2018-02-16ovl: hash non-dir by lower inode for fsnotifyAmir Goldstein1-18/+40
Commit 31747eda41ef ("ovl: hash directory inodes for fsnotify") fixed an issue of inotify watch on directory that stops getting events after dropping dentry caches. A similar issue exists for non-dir non-upper files, for example: $ mkdir -p lower upper work merged $ touch lower/foo $ mount -t overlay -o lowerdir=lower,workdir=work,upperdir=upper none merged $ inotifywait merged/foo & $ echo 2 > /proc/sys/vm/drop_caches $ cat merged/foo inotifywait doesn't get the OPEN event, because ovl_lookup() called from 'cat' allocates a new overlay inode and does not reuse the watched inode. Fix this by hashing non-dir overlay inodes by lower real inode in the following cases that were not hashed before this change: - A non-upper overlay mount - A lower non-hardlink when index=off A helper ovl_hash_bylower() was added to put all the logic and documentation about which real inode an overlay inode is hashed by into one place. The issue dates back to initial version of overlayfs, but this patch depends on ovl_inode code that was introduced in kernel v4.13. Cc: <stable@vger.kernel.org> #v4.13 Signed-off-by: Amir Goldstein <amir73il@gmail.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2018-02-15Merge branch 'x86-urgent-for-linus' of ↵Linus Torvalds1-0/+4
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Ingo Molnar: "Misc fixes all across the map: - /proc/kcore vsyscall related fixes - LTO fix - build warning fix - CPU hotplug fix - Kconfig NR_CPUS cleanups - cpu_has() cleanups/robustification - .gitignore fix - memory-failure unmapping fix - UV platform fix" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/mm, mm/hwpoison: Don't unconditionally unmap kernel 1:1 pages x86/error_inject: Make just_return_func() globally visible x86/platform/UV: Fix GAM Range Table entries less than 1GB x86/build: Add arch/x86/tools/insn_decoder_test to .gitignore x86/smpboot: Fix uncore_pci_remove() indexing bug when hot-removing a physical CPU x86/mm/kcore: Add vsyscall page to /proc/kcore conditionally vfs/proc/kcore, x86/mm/kcore: Fix SMAP fault when dumping vsyscall user page x86/Kconfig: Further simplify the NR_CPUS config x86/Kconfig: Simplify NR_CPUS config x86/MCE: Fix build warning introduced by "x86: do not use print_symbol()" x86/cpufeature: Update _static_cpu_has() to use all named variables x86/cpufeature: Reindent _static_cpu_has()
2018-02-14Merge tag 'gfs2-4.16.rc1.fixes' of ↵Linus Torvalds1-20/+23
git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2 Pull gfs2 fix from Bob Peterson: "Fix regressions in the gfs2 iomap for block_map implementation we recently discovered in commit 3974320ca6" * tag 'gfs2-4.16.rc1.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2: gfs2: Fixes to "Implement iomap for block_map"
2018-02-13gfs2: Fixes to "Implement iomap for block_map"Andreas Gruenbacher1-20/+23
It turns out that commit 3974320ca6 "Implement iomap for block_map" introduced a few bugs that trigger occasional failures with xfstest generic/476: In gfs2_iomap_begin, we jump to do_alloc when we determine that we are beyond the end of the allocated metadata (height > ip->i_height). There, we can end up calling hole_size with a metapath that doesn't match the current metadata tree, which doesn't make sense. After untangling the code at do_alloc, fix this by checking if the block we are looking for is within the range of allocated metadata. In addition, add a BUG() in case gfs2_iomap_begin is accidentally called for reading stuffed files: this is handled separately. Make sure we don't truncate iomap->length for reads beyond the end of the file; in that case, the entire range counts as a hole. Finally, revert to taking a bitmap write lock when doing allocations. It's unclear why that change didn't lead to any failures during testing. Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com> Signed-off-by: Bob Peterson <rpeterso@redhat.com>
2018-02-13vfs/proc/kcore, x86/mm/kcore: Fix SMAP fault when dumping vsyscall user pageJia Zhang1-0/+4
Commit: df04abfd181a ("fs/proc/kcore.c: Add bounce buffer for ktext data") ... introduced a bounce buffer to work around CONFIG_HARDENED_USERCOPY=y. However, accessing the vsyscall user page will cause an SMAP fault. Replace memcpy() with copy_from_user() to fix this bug works, but adding a common way to handle this sort of user page may be useful for future. Currently, only vsyscall page requires KCORE_USER. Signed-off-by: Jia Zhang <zhang.jia@linux.alibaba.com> Reviewed-by: Jiri Olsa <jolsa@kernel.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: jolsa@redhat.com Link: http://lkml.kernel.org/r/1518446694-21124-2-git-send-email-zhang.jia@linux.alibaba.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-02-12vfs: do bulk POLL* -> EPOLL* replacementLinus Torvalds24-80/+80
This is the mindless scripted replacement of kernel use of POLL* variables as described by Al, done by this script: for V in IN OUT PRI ERR RDNORM RDBAND WRNORM WRBAND HUP RDHUP NVAL MSG; do L=`git grep -l -w POLL$V | grep -v '^t' | grep -v /um/ | grep -v '^sa' | grep -v '/poll.h$'|grep -v '^D'` for f in $L; do sed -i "-es/^\([^\"]*\)\(\<POLL$V\>\)/\\1E\\2/" $f; done done with de-mangling cleanups yet to come. NOTE! On almost all architectures, the EPOLL* constants have the same values as the POLL* constants do. But they keyword here is "almost". For various bad reasons they aren't the same, and epoll() doesn't actually work quite correctly in some cases due to this on Sparc et al. The next patch from Al will sort out the final differences, and we should be all done. Scripted-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-02-12Merge branch 'work.poll2' of ↵Linus Torvalds4-21/+26
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull more poll annotation updates from Al Viro: "This is preparation to solving the problems you've mentioned in the original poll series. After this series, the kernel is ready for running for V in IN OUT PRI ERR RDNORM RDBAND WRNORM WRBAND HUP RDHUP NVAL MSG; do L=`git grep -l -w POLL$V | grep -v '^t' | grep -v /um/ | grep -v '^sa' | grep -v '/poll.h$'|grep -v '^D'` for f in $L; do sed -i "-es/^\([^\"]*\)\(\<POLL$V\>\)/\\1E\\2/" $f; done done as a for bulk search-and-replace. After that, the kernel is ready to apply the patch to unify {de,}mangle_poll(), and then get rid of kernel-side POLL... uses entirely, and we should be all done with that stuff. Basically, that's what you suggested wrt KPOLL..., except that we can use EPOLL... instead - they already are arch-independent (and equal to what is currently kernel-side POLL...). After the preparations (in this series) switch to returning EPOLL... from ->poll() instances is completely mechanical and kernel-side POLL... can go away. The last step (killing kernel-side POLL... and unifying {de,}mangle_poll() has to be done after the search-and-replace job, since we need userland-side POLL... for unified {de,}mangle_poll(), thus the cherry-pick at the last step. After that we will have: - POLL{IN,OUT,...} *not* in __poll_t, so any stray instances of ->poll() still using those will be caught by sparse. - eventpoll.c and select.c warning-free wrt __poll_t - no more kernel-side definitions of POLL... - userland ones are visible through the entire kernel (and used pretty much only for mangle/demangle) - same behavior as after the first series (i.e. sparc et.al. epoll(2) working correctly)" * 'work.poll2' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: annotate ep_scan_ready_list() ep_send_events_proc(): return result via esed->res preparation to switching ->poll() to returning EPOLL... add EPOLLNVAL, annotate EPOLL... and event_poll->event use linux/poll.h instead of asm/poll.h xen: fix poll misannotation smc: missing poll annotations
2018-02-10Merge branch 'for-linus' of ↵Linus Torvalds2-2/+5
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull misc vfs fixes from Al Viro. * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: seq_file: fix incomplete reset on read from zero offset kernfs: fix regression in kernfs_fop_write caused by wrong type