| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
This lets us use bch2_prt_bitflags to print them out.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Open coded dynamic arrays are deprecated.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Improved, better named version of pr_time().
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
BCACHEFS_DEBUG_TRANSACTIONS is useful, but it's too expensive to have on
by default - and it hasn't been coming up in bug reports.
Turn it off by default until we figure out a way to make it cheaper.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
BTREE_INSERT_NOJOURNAL is primarily used for a performance optimization
related to inode updates and fsync - document it.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
rebalance_work entries may refer to entries in the extents btree, which
is a snapshots btree, or they may also refer to entries in the reflink
btree, which is not.
Hence rebalance_work keys may use the snapshot field but it's not
required to be nonzero - add a new btree flag to reflect this.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
This was causing error messages in -tools to not get printed.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
When we didn't find anything in the journal that we'd like to use, and
we're forced to use whatever we can find - that entry will have been a
JSET_NO_FLUSH entry with a garbage last_seq value, since it's not
normally used.
Initialize it to something sane, for bch2_fs_journal_start().
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Delete the useless check for inum == 0; we'll return -ENOENT without it,
which is what we want.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
- the fsck_err() check for the filesystem being clean was incorrect,
causing us to always fail to delete unlinked inodes
- if a snapshot had been taken, the unlinked inode needs to be
propagated to snapshot leaves so the unlink can happen there - fixed.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
The bucket_offset field of bch_backpointer is a 40-bit bitfield, but the
bch2_backpointer_swab() helper uses swab32. This leads to inconsistency
when an on-disk fs is accessed from an opposite endian machine.
As it turns out, we already have an internal swab40() helper that is
used from the bch_alloc_v4 swab callback. Lift it into the backpointers
header file and use it consistently in both places.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
A simple test to populate a filesystem on one CPU architecture and
fsck on an arch of the opposite byte order produces errors related
to the fragmentation LRU. This occurs because the 64-bit
fragmentation_lru field is not byte-order swapped when reads detect
that the on-disk/bset key values were written in opposite byte-order
of the current CPU.
Update the bch2_alloc_v4 swab callback to handle fragmentation_lru
as is done for other multi-byte fields. This doesn't affect existing
filesystems when accessed by CPUs of the same endianness because the
->swab() callback is only called when the bset flags indicate an
endianness mismatch between the CPU and on-disk data.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
The bcachefs folio writeback code includes a bio full check as well
as a fixed size check to determine when to split off and submit
writeback I/O. The inclusive check of the latter against the limit
means that writeback can submit slightly prematurely. This is not a
functional problem, but results in unnecessarily split I/Os and
extent merging.
This can be observed with a buffered write sized exactly to the
current maximum value (1MB) and with key_merging_disabled=1. The
latter prevents the merge from the second write such that a
subsequent check of the extent list shows a 1020k extent followed by
a contiguous 4k extent.
The purpose for the fixed size check is also undocumented and
somewhat obscure. Lift this check into a new helper that wraps the
bio check, fix the comparison logic, and add a comment to document
the purpose and how we might improve on this in the future.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Guenter Roeck reports a lockdep splat and DEBUG_OBJECTS_WORK related
warning when bch2_copygc_thread() initializes its rhashtable. The
lockdep splat relates to a warning print caused by the fact that the
rhashtable exists on the stack but is not annotated as so. This is
something that could be addressed by INIT_WORK_ONSTACK(), but
rhashtable doesn't expose that control and probably isnt worth the
churn for just one user. Instead, dynamically allocate the
buckets_in_flight structure and avoid the splat that way.
Reported-by: Guenter Roeck <linux@roeck-us.net>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Brian Foster <bfoster@redhat.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
A recent bug report uncovered a scenario where a filesystem never
runs with freespace_initialized, and therefore the user observes
significantly degraded write performance by virtue of running the
early bucket allocator. The associated bug aside, the primary cause
of the performance drop in this particular instance is that the
early bucket allocator does not update the allocation cursor. This
means that every allocation walks the alloc btree from the first
bucket of the associated device looking for a bucket marked as free
space.
Update the early allocator code to set the alloc cursor to the last
processed position in the tree, similar to how the freelist
allocator behaves. With the alloc_cursor being updated, the retry
logic also needs to be updated to restart from the beginning of the
device when a free bucket is not available between the cursor and
the end of the device. Track the restart position in a first_bucket
variable to make the code a bit more easily readable and consistent
with the freelist allocator.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
bcachefs had a transient bug where freespace_initialized was not
properly being set, which lead to unexpected use of the early bucket
allocator at runtime. This issue has been fixed, but the existence
of it uncovered a coherency issue in the early bucket allocation
code that is somewhat related to how uncached iterators deal with
the key cache.
The problem itself manifests as occasional failure of generic/113
due to corruption, often seen as a duplicate backpointer or multiple
data types per-bucket error. The immediate cause of the error is a
racing bucket allocation along the lines of the following sequence:
- Task 1 selects key A in bch2_bucket_alloc_early() and schedules.
- Task 2 selects the same key A, but proceeds to complete the
allocation and associated I/O, after which it releases the
open_bucket.
- Task 1 resumes with key A, but does not recognize the bucket is
now allocated because the open_bucket has been removed
from the hash when it was released in the previous step.
This generally shouldn't happen because the allocating task updates
the alloc btree key before releasing the bucket. This is not
sufficient in this particular instance, however, because an uncached
iterator for a cached btree doesn't actually lock the key cache slot
when no key exists for a given slot in the cache. Thus the fact that
the allocation side updates the cached key means that multiple
uncached iters can stumble across the same alloc key and duplicate
the bucket allocation as described above.
This is something that probably needs a longer term fix in the
iterator code. As a short term fix, close the race through explicit
use of a cached iterator for likely allocation candidates. We don't
want to scan the btree with a cached iterator because that would
unnecessarily pollute the cache. This mitigates cache pollution by
primarily scanning the tree with an uncached iterator, but closes
the race by creating a key cache entry for any prospective slot
prior to the bucket allocation attempt (also similar to how
_alloc_freelist() works via try_alloc_bucket()). This survives many
iterations of generic/113 on a kernel hacked to always use the early
bucket allocator.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs
Pull f2fs updates from Jaegeuk Kim:
"In this cycle, we introduce a bigger page size support by changing the
internal f2fs's block size aligned to the page size. We also continue
to improve zoned block device support regarding the power off
recovery. As usual, there are some bug fixes regarding the error
handling routines in compression and ioctl.
Enhancements:
- Support Block Size == Page Size
- let f2fs_precache_extents() traverses in file range
- stop iterating f2fs_map_block if hole exists
- preload extent_cache for POSIX_FADV_WILLNEED
- compress: fix to avoid fragment w/ OPU during f2fs_ioc_compress_file()
Bug fixes:
- do not return EFSCORRUPTED, but try to run online repair
- finish previous checkpoints before returning from remount
- fix error handling of __get_node_page and __f2fs_build_free_nids
- clean up zones when not successfully unmounted
- fix to initialize map.m_pblk in f2fs_precache_extents()
- fix to drop meta_inode's page cache in f2fs_put_super()
- set the default compress_level on ioctl
- fix to avoid use-after-free on dic
- fix to avoid redundant compress extension
- do sanity check on cluster when CONFIG_F2FS_CHECK_FS is on
- fix deadloop in f2fs_write_cache_pages()"
* tag 'f2fs-for-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs:
f2fs: finish previous checkpoints before returning from remount
f2fs: fix error handling of __get_node_page
f2fs: do not return EFSCORRUPTED, but try to run online repair
f2fs: fix error path of __f2fs_build_free_nids
f2fs: Clean up errors in segment.h
f2fs: clean up zones when not successfully unmounted
f2fs: let f2fs_precache_extents() traverses in file range
f2fs: avoid format-overflow warning
f2fs: fix to initialize map.m_pblk in f2fs_precache_extents()
f2fs: Support Block Size == Page Size
f2fs: stop iterating f2fs_map_block if hole exists
f2fs: preload extent_cache for POSIX_FADV_WILLNEED
f2fs: set the default compress_level on ioctl
f2fs: compress: fix to avoid fragment w/ OPU during f2fs_ioc_compress_file()
f2fs: fix to drop meta_inode's page cache in f2fs_put_super()
f2fs: split initial and dynamic conditions for extent_cache
f2fs: compress: fix to avoid redundant compress extension
f2fs: compress: do sanity check on cluster when CONFIG_F2FS_CHECK_FS is on
f2fs: compress: fix to avoid use-after-free on dic
f2fs: compress: fix deadloop in f2fs_write_cache_pages()
|
|
Pull 9p updates from Dominique Martinet:
A bunch of small fixes:
- three W=1 warning fixes: the NULL -> "" replacement isn't trivial
but is serialized identically by the protocol layer and has been
tested
- one syzbot/KCSAN datarace annotation where we don't care about
users messing with the fd they passed to mount -t 9p
- removing a declaration without implementation
- yet another race fix for trans_fd around connection close: the
'err' field is also used in potentially racy calls and this isn't
complete, but it's better than what we had
- and finally a theorical memory leak fix on serialization failure"
* tag '9p-for-6.7-rc1' of https://github.com/martinetd/linux:
9p/net: fix possible memory leak in p9_check_errors()
9p/fs: add MODULE_DESCRIPTION
9p/net: xen: fix false positive printf format overflow warning
9p: v9fs_listxattr: fix %s null argument warning
9p/trans_fd: Annotate data-racy writes to file::f_flags
fs/9p: Remove unused function declaration v9fs_inode2stat()
9p/trans_fd: avoid sending req to a cancelled conn
|
|
git://git.samba.org/sfrench/cifs-2.6
Pull smb client updates from Steve French:
- use after free fixes and deadlock fix
- symlink timestamp fix
- hashing perf improvement
- multichannel fixes
- minor debugging improvements
- fix creating fifos when using "sfu" mounts
- NTLMSSP authentication improvement
- minor fixes to include some missing create flags and structures from
recently updated protocol documentation
* tag '6.7-rc-smb3-client-fixes-part1' of git://git.samba.org/sfrench/cifs-2.6:
cifs: force interface update before a fresh session setup
cifs: do not reset chan_max if multichannel is not supported at mount
cifs: reconnect helper should set reconnect for the right channel
smb: client: fix use-after-free in smb2_query_info_compound()
smb: client: remove extra @chan_count check in __cifs_put_smb_ses()
cifs: add xid to query server interface call
cifs: print server capabilities in DebugData
smb: use crypto_shash_digest() in symlink_hash()
smb: client: fix use-after-free bug in cifs_debug_data_proc_show()
smb: client: fix potential deadlock when releasing mids
smb3: fix creating FIFOs when mounting with "sfu" mount option
Add definition for new smb3.1.1 command type
SMB3: clarify some of the unused CreateOption flags
cifs: Add client version details to NTLM authenticate message
smb3: fix touch -h of symlink
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi
Pull EFI update from Ard Biesheuvel:
"This is the only remaining EFI change, as everything else was taken
via -tip this cycle:
- implement uid/gid mount options for efivarfs"
* tag 'efi-next-for-v6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi:
efivarfs: Add uid/gid mount options
|
|
The SRCU read lock that btree_trans takes exists to make it safe for
bch2_trans_relock() to deref pointers to btree nodes/key cache items we
don't have locked, but as a side effect it blocks reclaim from freeing
those items.
Thus, it's important to not hold it for too long: we need to
differentiate between bch2_trans_unlock() calls that will be only for a
short duration, and ones that will be for an unbounded duration.
This introduces bch2_trans_unlock_long(), to be used mainly by the data
move paths.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
gcc 10 seems to complain about array bounds in situations where gcc 11
does not - curious.
This unfortunately requires adding some casts for now; we may
investigate getting rid of our __u64 _data[] VLA in a future patch so
that our start[0] members can be VLAs.
Reported-by: John Stoffel <john@stoffel.org>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Fixes:
https://lore.kernel.org/linux-bcachefs/CAMuHMdXpwMdLuoWsNGa8qacT_5Wv-vSTz0xoBR5n_fnD9cNOuQ@mail.gmail.com/
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
If copygc does no work - finds no fragmented buckets - wait for a bit of
IO to happen.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core updates from Greg KH:
"Here is the set of driver core updates for 6.7-rc1. Nothing major in
here at all, just a small number of changes including:
- minor cleanups and updates from Andy Shevchenko
- __counted_by addition
- firmware_loader update for aborting loads cleaner
- other minor changes, details in the shortlog
- documentation update
All of these have been in linux-next for a while with no reported
issues"
* tag 'driver-core-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (21 commits)
firmware_loader: Abort all upcoming firmware load request once reboot triggered
firmware_loader: Refactor kill_pending_fw_fallback_reqs()
Documentation: security-bugs.rst: linux-distros relaxed their rules
driver core: Release all resources during unbind before updating device links
driver core: class: remove boilerplate code
driver core: platform: Annotate struct irq_affinity_devres with __counted_by
resource: Constify resource crosscheck APIs
resource: Unify next_resource() and next_resource_skip_children()
resource: Reuse for_each_resource() macro
PCI: Implement custom llseek for sysfs resource entries
kernfs: sysfs: support custom llseek method for sysfs entries
debugfs: Fix __rcu type comparison warning
device property: Replace custom implementation of COUNT_ARGS()
drivers: base: test: Make property entry API test modular
driver core: Add missing parameter description to __fwnode_link_add()
device property: Clarify usage scope of some struct fwnode_handle members
devres: rename the first parameter of devm_add_action(_or_reset)
driver core: platform: Unify the firmware node type check
driver core: platform: Use temporary variable in platform_device_add()
driver core: platform: Refactor error path in a couple places
...
|
|
Now that we converted cephfs internally to account for idmapped mounts
allow the creation of idmapped mounts on by setting the FS_ALLOW_IDMAP
flag.
Signed-off-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Alexander Mikhalitsyn <aleksandr.mikhalitsyn@canonical.com>
Reviewed-by: Xiubo Li <xiubli@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
|
|
Enable ceph_atomic_open() to handle idmapped mounts. This is just a
matter of passing down the mount's idmapping.
[ aleksandr.mikhalitsyn: adapted to 5fadbd9929 ("ceph: rely on vfs for
setgid stripping") ]
Signed-off-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Alexander Mikhalitsyn <aleksandr.mikhalitsyn@canonical.com>
Reviewed-by: Xiubo Li <xiubli@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
|
|
Enable ceph_set_acl() to handle idmapped mounts. This is just a matter
of passing down the mount's idmapping.
Signed-off-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Alexander Mikhalitsyn <aleksandr.mikhalitsyn@canonical.com>
Reviewed-by: Xiubo Li <xiubli@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
|
|
Enable __ceph_setattr() to handle idmapped mounts. This is just a matter
of passing down the mount's idmapping.
[ aleksandr.mikhalitsyn: adapted to b27c82e12965 ("attr: port attribute
changes to new types") ]
Signed-off-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Alexander Mikhalitsyn <aleksandr.mikhalitsyn@canonical.com>
Reviewed-by: Xiubo Li <xiubli@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
|
|
Just pass down the mount's idmapping to __ceph_setattr,
because we will need it later.
Signed-off-by: Alexander Mikhalitsyn <aleksandr.mikhalitsyn@canonical.com>
Acked-by: Christian Brauner <brauner@kernel.org>
Reviewed-by: Xiubo Li <xiubli@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
|
|
Enable ceph_permission() to handle idmapped mounts. This is just a
matter of passing down the mount's idmapping.
Signed-off-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Alexander Mikhalitsyn <aleksandr.mikhalitsyn@canonical.com>
Reviewed-by: Xiubo Li <xiubli@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
|
|
Enable ceph_getattr() to handle idmapped mounts. This is just a matter
of passing down the mount's idmapping.
Signed-off-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Alexander Mikhalitsyn <aleksandr.mikhalitsyn@canonical.com>
Reviewed-by: Xiubo Li <xiubli@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
|
|
Enable mknod/symlink/mkdir iops to handle idmapped mounts.
This is just a matter of passing down the mount's idmapping.
Signed-off-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Alexander Mikhalitsyn <aleksandr.mikhalitsyn@canonical.com>
Reviewed-by: Xiubo Li <xiubli@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
|
|
This parameter is used to decide if we allow
to perform IO on idmapped mount in case when MDS lacks
support of CEPHFS_FEATURE_HAS_OWNER_UIDGID feature.
In this case we can't properly handle MDS permission
checks and if UID/GID-based restrictions are enabled
on the MDS side then IO requests which go through an
idmapped mount may fail with -EACCESS/-EPERM.
Fortunately, for most of users it's not a case and
everything should work fine. But we put work "unsafe"
in the module parameter name to warn users about
possible problems with this feature and encourage
update of cephfs MDS.
Suggested-by: Stéphane Graber <stgraber@ubuntu.com>
Signed-off-by: Alexander Mikhalitsyn <aleksandr.mikhalitsyn@canonical.com>
Acked-by: Christian Brauner <brauner@kernel.org>
Reviewed-by: Xiubo Li <xiubli@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
|
|
Inode operations that create a new filesystem object such as ->mknod,
->create, ->mkdir() and others don't take a {g,u}id argument explicitly.
Instead the caller's fs{g,u}id is used for the {g,u}id of the new
filesystem object.
In order to ensure that the correct {g,u}id is used map the caller's
fs{g,u}id for creation requests. This doesn't require complex changes.
It suffices to pass in the relevant idmapping recorded in the request
message. If this request message was triggered from an inode operation
that creates filesystem objects it will have passed down the relevant
idmaping. If this is a request message that was triggered from an inode
operation that doens't need to take idmappings into account the initial
idmapping is passed down which is an identity mapping.
This change uses a new cephfs protocol extension CEPHFS_FEATURE_HAS_OWNER_UIDGID
which adds two new fields (owner_{u,g}id) to the request head structure.
So, we need to ensure that MDS supports it otherwise we need to fail
any IO that comes through an idmapped mount because we can't process it
in a proper way. MDS server without such an extension will use caller_{u,g}id
fields to set a new inode owner UID/GID which is incorrect because caller_{u,g}id
values are unmapped. At the same time we can't map these fields with an
idmapping as it can break UID/GID-based permission checks logic on the
MDS side. This problem was described with a lot of details at [1], [2].
[1] https://lore.kernel.org/lkml/CAEivzxfw1fHO2TFA4dx3u23ZKK6Q+EThfzuibrhA3RKM=ZOYLg@mail.gmail.com/
[2] https://lore.kernel.org/all/20220104140414.155198-3-brauner@kernel.org/
Link: https://github.com/ceph/ceph/pull/52575
Link: https://tracker.ceph.com/issues/62217
Co-Developed-by: Alexander Mikhalitsyn <aleksandr.mikhalitsyn@canonical.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Alexander Mikhalitsyn <aleksandr.mikhalitsyn@canonical.com>
Reviewed-by: Xiubo Li <xiubli@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
|
|
When sending a mds request cephfs will send relevant data for the
requested operation. For creation requests the caller's fs{g,u}id is
used to set the ownership of the newly created filesystem object. For
setattr requests the caller can pass in arbitrary {g,u}id values to
which the relevant filesystem object is supposed to be changed.
If the caller is performing the relevant operation via an idmapped mount
cephfs simply needs to take the idmapping into account when it sends the
relevant mds request.
In order to support idmapped mounts for cephfs we stash the idmapping
whenever they are relevant for the operation for the duration of the
request. Since mds requests can be queued and performed asynchronously
we make sure to keep the idmapping around and release it once the
request has finished.
In follow-up patches we will use this to send correct ownership
information over the wire. This patch just adds the basic infrastructure
to keep the idmapping around. The actual conversion patches are all
fairly minimal.
Signed-off-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Alexander Mikhalitsyn <aleksandr.mikhalitsyn@canonical.com>
Reviewed-by: Xiubo Li <xiubli@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
|
|
These helpers are required to support idmapped mounts in CephFS.
Cc: linux-fsdevel@vger.kernel.org
Signed-off-by: Alexander Mikhalitsyn <aleksandr.mikhalitsyn@canonical.com>
Reviewed-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
|
|
The mdsmap.h is only used by CephFS, so move it to fs/ceph.
Signed-off-by: Xiubo Li <xiubli@redhat.com>
Reviewed-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
|
|
Multiple CephFS mounts on a host is increasingly common so
disambiguating messages like this is necessary and will make it easier
to debug issues.
At the same this will improve the debug logs to make them easier to
troubleshooting issues, such as print the ino# instead only printing
the memory addresses of the corresponding inodes and print the dentry
names instead of the corresponding memory addresses for the dentry,etc.
Link: https://tracker.ceph.com/issues/61590
Signed-off-by: Xiubo Li <xiubli@redhat.com>
Reviewed-by: Patrick Donnelly <pdonnell@redhat.com>
Reviewed-by: Milind Changire <mchangir@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
|
|
We need to covert the inode to ceph_client in the following commit,
and will add one new helper for that, here we rename the old helper
to _fs_client().
Link: https://tracker.ceph.com/issues/61590
Signed-off-by: Xiubo Li <xiubli@redhat.com>
Reviewed-by: Patrick Donnelly <pdonnell@redhat.com>
Reviewed-by: Milind Changire <mchangir@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
|
|
We will use the 'mdsc' to get the global_id in the following commits.
Link: https://tracker.ceph.com/issues/61590
Signed-off-by: Xiubo Li <xiubli@redhat.com>
Reviewed-by: Patrick Donnelly <pdonnell@redhat.com>
Reviewed-by: Milind Changire <mchangir@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing updates from Steven Rostedt:
- Remove eventfs_file descriptor
This is the biggest change, and the second part of making eventfs
create its files dynamically.
In 6.6 the first part was added, and that maintained a one to one
mapping between eventfs meta descriptors and the directories and file
inodes and dentries that were dynamically created. The directories
were represented by a eventfs_inode and the files were represented by
a eventfs_file.
In v6.7 the eventfs_file is removed. As all events have the same
directory make up (sched_switch has an "enable", "id", "format", etc
files), the handing of what files are underneath each leaf eventfs
directory is moved back to the tracing subsystem via a callback.
When an event is added to the eventfs, it registers an array of
evenfs_entry's. These hold the names of the files and the callbacks
to call when the file is referenced. The callback gets the name so
that the same callback may be used by multiple files. The callback
then supplies the filesystem_operations structure needed to create
this file.
This has brought the memory footprint of creating multiple eventfs
instances down by 2 megs each!
- User events now has persistent events that are not associated to a
single processes. These are privileged events that hang around even
if no process is attached to them
- Clean up of seq_buf
There's talk about using seq_buf more to replace strscpy() and
friends. But this also requires some minor modifications of seq_buf
to be able to do this
- Expand instance ring buffers individually
Currently if boot up creates an instance, and a trace event is
enabled on that instance, the ring buffer for that instance and the
top level ring buffer are expanded (1.4 MB per CPU). This wastes
memory as this happens when nothing is using the top level instance
- Other minor clean ups and fixes
* tag 'trace-v6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace: (34 commits)
seq_buf: Export seq_buf_puts()
seq_buf: Export seq_buf_putc()
eventfs: Use simple_recursive_removal() to clean up dentries
eventfs: Remove special processing of dput() of events directory
eventfs: Delete eventfs_inode when the last dentry is freed
eventfs: Hold eventfs_mutex when calling callback functions
eventfs: Save ownership and mode
eventfs: Test for ei->is_freed when accessing ei->dentry
eventfs: Have a free_ei() that just frees the eventfs_inode
eventfs: Remove "is_freed" union with rcu head
eventfs: Fix kerneldoc of eventfs_remove_rec()
tracing: Have the user copy of synthetic event address use correct context
eventfs: Remove extra dget() in eventfs_create_events_dir()
tracing: Have trace_event_file have ref counters
seq_buf: Introduce DECLARE_SEQ_BUF and seq_buf_str()
eventfs: Fix typo in eventfs_inode union comment
eventfs: Fix WARN_ON() in create_file_dentry()
powerpc: Remove initialisation of readpos
tracing/histograms: Simplify last_cmd_set()
seq_buf: fix a misleading comment
...
|
|
Commit 4c72a36edd54 ("exfat: convert to new timestamp accessors")
removed attr_copy() from exfat_set_attr().
It causes xfstests generic/221 to fail. In xfstests generic/221,
it tests ctime should be updated even if futimens() update atime
only. But in this case, ctime will not be updated if attr_copy()
is removed.
attr_copy() may also update other attributes, and removing it may
cause other bugs, so this commit restores to call attr_copy() in
exfat_set_attr().
Fixes: 4c72a36edd54 ("exfat: convert to new timestamp accessors")
Signed-off-by: Yuezhang Mo <Yuezhang.Mo@sony.com>
Reviewed-by: Andy Wu <Andy.Wu@sony.com>
Reviewed-by: Aoyama Wataru <wataru.aoyama@sony.com>
Reviewed-by: Sungjong Seo <sj1557.seo@samsung.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
|
|
An uninitialized time is set to ctime/atime in __exfat_write_inode().
It causes xfstests generic/003 and generic/192 to fail.
And since there will be a time gap between setting ctime/atime to
the inode and writing back the inode, so ctime/atime should not be
set again when writing back the inode.
Fixes: 4c72a36edd54 ("exfat: convert to new timestamp accessors")
Signed-off-by: Yuezhang Mo <Yuezhang.Mo@sony.com>
Reviewed-by: Andy Wu <Andy.Wu@sony.com>
Reviewed-by: Aoyama Wataru <wataru.aoyama@sony.com>
Reviewed-by: Sungjong Seo <sj1557.seo@samsung.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull non-MM updates from Andrew Morton:
"As usual, lots of singleton and doubleton patches all over the tree
and there's little I can say which isn't in the individual changelogs.
The lengthier patch series are
- 'kdump: use generic functions to simplify crashkernel reservation
in arch', from Baoquan He. This is mainly cleanups and
consolidation of the 'crashkernel=' kernel parameter handling
- After much discussion, David Laight's 'minmax: Relax type checks in
min() and max()' is here. Hopefully reduces some typecasting and
the use of min_t() and max_t()
- A group of patches from Oleg Nesterov which clean up and slightly
fix our handling of reads from /proc/PID/task/... and which remove
task_struct.thread_group"
* tag 'mm-nonmm-stable-2023-11-02-14-08' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (64 commits)
scripts/gdb/vmalloc: disable on no-MMU
scripts/gdb: fix usage of MOD_TEXT not defined when CONFIG_MODULES=n
.mailmap: add address mapping for Tomeu Vizoso
mailmap: update email address for Claudiu Beznea
tools/testing/selftests/mm/run_vmtests.sh: lower the ptrace permissions
.mailmap: map Benjamin Poirier's address
scripts/gdb: add lx_current support for riscv
ocfs2: fix a spelling typo in comment
proc: test ProtectionKey in proc-empty-vm test
proc: fix proc-empty-vm test with vsyscall
fs/proc/base.c: remove unneeded semicolon
do_io_accounting: use sig->stats_lock
do_io_accounting: use __for_each_thread()
ocfs2: replace BUG_ON() at ocfs2_num_free_extents() with ocfs2_error()
ocfs2: fix a typo in a comment
scripts/show_delta: add __main__ judgement before main code
treewide: mark stuff as __ro_after_init
fs: ocfs2: check status values
proc: test /proc/${pid}/statm
compiler.h: move __is_constexpr() to compiler.h
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
"Many singleton patches against the MM code. The patch series which are
included in this merge do the following:
- Kemeng Shi has contributed some compation maintenance work in the
series 'Fixes and cleanups to compaction'
- Joel Fernandes has a patchset ('Optimize mremap during mutual
alignment within PMD') which fixes an obscure issue with mremap()'s
pagetable handling during a subsequent exec(), based upon an
implementation which Linus suggested
- More DAMON/DAMOS maintenance and feature work from SeongJae Park i
the following patch series:
mm/damon: misc fixups for documents, comments and its tracepoint
mm/damon: add a tracepoint for damos apply target regions
mm/damon: provide pseudo-moving sum based access rate
mm/damon: implement DAMOS apply intervals
mm/damon/core-test: Fix memory leaks in core-test
mm/damon/sysfs-schemes: Do DAMOS tried regions update for only one apply interval
- In the series 'Do not try to access unaccepted memory' Adrian
Hunter provides some fixups for the recently-added 'unaccepted
memory' feature. To increase the feature's checking coverage. 'Plug
a few gaps where RAM is exposed without checking if it is
unaccepted memory'
- In the series 'cleanups for lockless slab shrink' Qi Zheng has done
some maintenance work which is preparation for the lockless slab
shrinking code
- Qi Zheng has redone the earlier (and reverted) attempt to make slab
shrinking lockless in the series 'use refcount+RCU method to
implement lockless slab shrink'
- David Hildenbrand contributes some maintenance work for the rmap
code in the series 'Anon rmap cleanups'
- Kefeng Wang does more folio conversions and some maintenance work
in the migration code. Series 'mm: migrate: more folio conversion
and unification'
- Matthew Wilcox has fixed an issue in the buffer_head code which was
causing long stalls under some heavy memory/IO loads. Some cleanups
were added on the way. Series 'Add and use bdev_getblk()'
- In the series 'Use nth_page() in place of direct struct page
manipulation' Zi Yan has fixed a potential issue with the direct
manipulation of hugetlb page frames
- In the series 'mm: hugetlb: Skip initialization of gigantic tail
struct pages if freed by HVO' has improved our handling of gigantic
pages in the hugetlb vmmemmep optimizaton code. This provides
significant boot time improvements when significant amounts of
gigantic pages are in use
- Matthew Wilcox has sent the series 'Small hugetlb cleanups' - code
rationalization and folio conversions in the hugetlb code
- Yin Fengwei has improved mlock()'s handling of large folios in the
series 'support large folio for mlock'
- In the series 'Expose swapcache stat for memcg v1' Liu Shixin has
added statistics for memcg v1 users which are available (and
useful) under memcg v2
- Florent Revest has enhanced the MDWE (Memory-Deny-Write-Executable)
prctl so that userspace may direct the kernel to not automatically
propagate the denial to child processes. The series is named 'MDWE
without inheritance'
- Kefeng Wang has provided the series 'mm: convert numa balancing
functions to use a folio' which does what it says
- In the series 'mm/ksm: add fork-exec support for prctl' Stefan
Roesch makes is possible for a process to propagate KSM treatment
across exec()
- Huang Ying has enhanced memory tiering's calculation of memory
distances. This is used to permit the dax/kmem driver to use 'high
bandwidth memory' in addition to Optane Data Center Persistent
Memory Modules (DCPMM). The series is named 'memory tiering:
calculate abstract distance based on ACPI HMAT'
- In the series 'Smart scanning mode for KSM' Stefan Roesch has
optimized KSM by teaching it to retain and use some historical
information from previous scans
- Yosry Ahmed has fixed some inconsistencies in memcg statistics in
the series 'mm: memcg: fix tracking of pending stats updates
values'
- In the series 'Implement IOCTL to get and optionally clear info
about PTEs' Peter Xu has added an ioctl to /proc/<pid>/pagemap
which permits us to atomically read-then-clear page softdirty
state. This is mainly used by CRIU
- Hugh Dickins contributed the series 'shmem,tmpfs: general
maintenance', a bunch of relatively minor maintenance tweaks to
this code
- Matthew Wilcox has increased the use of the VMA lock over
file-backed page faults in the series 'Handle more faults under the
VMA lock'. Some rationalizations of the fault path became possible
as a result
- In the series 'mm/rmap: convert page_move_anon_rmap() to
folio_move_anon_rmap()' David Hildenbrand has implemented some
cleanups and folio conversions
- In the series 'various improvements to the GUP interface' Lorenzo
Stoakes has simplified and improved the GUP interface with an eye
to providing groundwork for future improvements
- Andrey Konovalov has sent along the series 'kasan: assorted fixes
and improvements' which does those things
- Some page allocator maintenance work from Kemeng Shi in the series
'Two minor cleanups to break_down_buddy_pages'
- In thes series 'New selftest for mm' Breno Leitao has developed
another MM self test which tickles a race we had between madvise()
and page faults
- In the series 'Add folio_end_read' Matthew Wilcox provides cleanups
and an optimization to the core pagecache code
- Nhat Pham has added memcg accounting for hugetlb memory in the
series 'hugetlb memcg accounting'
- Cleanups and rationalizations to the pagemap code from Lorenzo
Stoakes, in the series 'Abstract vma_merge() and split_vma()'
- Audra Mitchell has fixed issues in the procfs page_owner code's new
timestamping feature which was causing some misbehaviours. In the
series 'Fix page_owner's use of free timestamps'
- Lorenzo Stoakes has fixed the handling of new mappings of sealed
files in the series 'permit write-sealed memfd read-only shared
mappings'
- Mike Kravetz has optimized the hugetlb vmemmap optimization in the
series 'Batch hugetlb vmemmap modification operations'
- Some buffer_head folio conversions and cleanups from Matthew Wilcox
in the series 'Finish the create_empty_buffers() transition'
- As a page allocator performance optimization Huang Ying has added
automatic tuning to the allocator's per-cpu-pages feature, in the
series 'mm: PCP high auto-tuning'
- Roman Gushchin has contributed the patchset 'mm: improve
performance of accounted kernel memory allocations' which improves
their performance by ~30% as measured by a micro-benchmark
- folio conversions from Kefeng Wang in the series 'mm: convert page
cpupid functions to folios'
- Some kmemleak fixups in Liu Shixin's series 'Some bugfix about
kmemleak'
- Qi Zheng has improved our handling of memoryless nodes by keeping
them off the allocation fallback list. This is done in the series
'handle memoryless nodes more appropriately'
- khugepaged conversions from Vishal Moola in the series 'Some
khugepaged folio conversions'"
[ bcachefs conflicts with the dynamically allocated shrinkers have been
resolved as per Stephen Rothwell in
https://lore.kernel.org/all/20230913093553.4290421e@canb.auug.org.au/
with help from Qi Zheng.
The clone3 test filtering conflict was half-arsed by yours truly ]
* tag 'mm-stable-2023-11-01-14-33' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (406 commits)
mm/damon/sysfs: update monitoring target regions for online input commit
mm/damon/sysfs: remove requested targets when online-commit inputs
selftests: add a sanity check for zswap
Documentation: maple_tree: fix word spelling error
mm/vmalloc: fix the unchecked dereference warning in vread_iter()
zswap: export compression failure stats
Documentation: ubsan: drop "the" from article title
mempolicy: migration attempt to match interleave nodes
mempolicy: mmap_lock is not needed while migrating folios
mempolicy: alloc_pages_mpol() for NUMA policy without vma
mm: add page_rmappable_folio() wrapper
mempolicy: remove confusing MPOL_MF_LAZY dead code
mempolicy: mpol_shared_policy_init() without pseudo-vma
mempolicy trivia: use pgoff_t in shared mempolicy tree
mempolicy trivia: slightly more consistent naming
mempolicy trivia: delete those ancient pr_debug()s
mempolicy: fix migrate_pages(2) syscall return nr_failed
kernfs: drop shared NUMA mempolicy hooks
hugetlbfs: drop shared NUMA mempolicy pretence
mm/damon/sysfs-test: add a unit test for damon_sysfs_set_targets()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto updates from Herbert Xu:
"API:
- Add virtual-address based lskcipher interface
- Optimise ahash/shash performance in light of costly indirect calls
- Remove ahash alignmask attribute
Algorithms:
- Improve AES/XTS performance of 6-way unrolling for ppc
- Remove some uses of obsolete algorithms (md4, md5, sha1)
- Add FIPS 202 SHA-3 support in pkcs1pad
- Add fast path for single-page messages in adiantum
- Remove zlib-deflate
Drivers:
- Add support for S4 in meson RNG driver
- Add STM32MP13x support in stm32
- Add hwrng interface support in qcom-rng
- Add support for deflate algorithm in hisilicon/zip"
* tag 'v6.7-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (283 commits)
crypto: adiantum - flush destination page before unmapping
crypto: testmgr - move pkcs1pad(rsa,sha3-*) to correct place
Documentation/module-signing.txt: bring up to date
module: enable automatic module signing with FIPS 202 SHA-3
crypto: asymmetric_keys - allow FIPS 202 SHA-3 signatures
crypto: rsa-pkcs1pad - Add FIPS 202 SHA-3 support
crypto: FIPS 202 SHA-3 register in hash info for IMA
x509: Add OIDs for FIPS 202 SHA-3 hash and signatures
crypto: ahash - optimize performance when wrapping shash
crypto: ahash - check for shash type instead of not ahash type
crypto: hash - move "ahash wrapping shash" functions to ahash.c
crypto: talitos - stop using crypto_ahash::init
crypto: chelsio - stop using crypto_ahash::init
crypto: ahash - improve file comment
crypto: ahash - remove struct ahash_request_priv
crypto: ahash - remove crypto_ahash_alignmask
crypto: gcm - stop using alignmask of ahash
crypto: chacha20poly1305 - stop using alignmask of ahash
crypto: ccm - stop using alignmask of ahash
net: ipv6: stop checking crypto_ahash_alignmask
...
|
|
Add a metapath_dibh() helper for extracting the inode's buffer head from
a metapath.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
|
