| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
In cases of large directories, the readdir operation may span multiple
round trips to retrieve contents. This introduces a potential race
condition in case of concurrent write and readdir operations. If the
readdir operation initiates before a write has been processed by the
server, it may update the file size attribute to an older value.
Address this issue by avoiding file size updates from readdir when we
have read/write lease.
Scenario:
1) process1: open dir xyz
2) process1: readdir instance 1 on xyz
3) process2: create file.txt for write
4) process2: write x bytes to file.txt
5) process2: close file.txt
6) process2: open file.txt for read
7) process1: readdir 2 - overwrites file.txt inode size to 0
8) process2: read contents of file.txt - bug, short read with 0 bytes
Cc: stable@vger.kernel.org
Reviewed-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Bharath SM <bharathsm@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Since fscache can utilize iov_iter to write dest buffers, bio_vec can
be used in this way too.
To simplify this, pseudo bios are prepared and bio_vec will be filled
with bio_add_page(). And a common .bi_end_io will be called directly
to handle I/O completions.
Signed-off-by: Jingbo Xu <jefflexu@linux.alibaba.com>
Reviewed-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Link: https://lore.kernel.org/r/20240308094159.40547-2-jefflexu@linux.alibaba.com
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
|
|
So far the fscache mode supports uncompressed data only, and the data
read from fscache is put directly into the target page cache. As the
support for compressed data in fscache mode is going to be introduced,
rework the fscache internals so that the following compressed part
could make the raw data read from fscache be directed to the target
buffer it wants, decompress the raw data, and finally fill the page
cache with the decompressed data.
As the first step, a new structure, i.e. erofs_fscache_io (io), is
introduced to describe a generic read request from the fscache, while
the caller can specify the target buffer it wants in the iov_iter
structure (io->iter). Besides, the caller can also specify its
completion callback and private data through erofs_fscache_io, which
will be called to make further handling, e.g. unlocking the page cache
for uncompressed data or decompressing the read raw data, when the read
request from the fscache completes. Now erofs_fscache_read_io_async()
serves as a generic interface for reading raw data from fscache for both
compressed and uncompressed data.
The erofs_fscache_rq structure is kept to describe a request to fill the
page cache in the specified range.
Signed-off-by: Jingbo Xu <jefflexu@linux.alibaba.com>
Reviewed-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Link: https://lore.kernel.org/r/20240308094159.40547-1-jefflexu@linux.alibaba.com
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
|
|
Lockdep reported the following issue when mounting erofs with a domain_id:
============================================
WARNING: possible recursive locking detected
6.8.0-rc7-xfstests #521 Not tainted
--------------------------------------------
mount/396 is trying to acquire lock:
ffff907a8aaaa0e0 (&type->s_umount_key#50/1){+.+.}-{3:3},
at: alloc_super+0xe3/0x3d0
but task is already holding lock:
ffff907a8aaa90e0 (&type->s_umount_key#50/1){+.+.}-{3:3},
at: alloc_super+0xe3/0x3d0
other info that might help us debug this:
Possible unsafe locking scenario:
CPU0
----
lock(&type->s_umount_key#50/1);
lock(&type->s_umount_key#50/1);
*** DEADLOCK ***
May be due to missing lock nesting notation
2 locks held by mount/396:
#0: ffff907a8aaa90e0 (&type->s_umount_key#50/1){+.+.}-{3:3},
at: alloc_super+0xe3/0x3d0
#1: ffffffffc00e6f28 (erofs_domain_list_lock){+.+.}-{3:3},
at: erofs_fscache_register_fs+0x3d/0x270 [erofs]
stack backtrace:
CPU: 1 PID: 396 Comm: mount Not tainted 6.8.0-rc7-xfstests #521
Call Trace:
<TASK>
dump_stack_lvl+0x64/0xb0
validate_chain+0x5c4/0xa00
__lock_acquire+0x6a9/0xd50
lock_acquire+0xcd/0x2b0
down_write_nested+0x45/0xd0
alloc_super+0xe3/0x3d0
sget_fc+0x62/0x2f0
vfs_get_super+0x21/0x90
vfs_get_tree+0x2c/0xf0
fc_mount+0x12/0x40
vfs_kern_mount.part.0+0x75/0x90
kern_mount+0x24/0x40
erofs_fscache_register_fs+0x1ef/0x270 [erofs]
erofs_fc_fill_super+0x213/0x380 [erofs]
This is because the file_system_type of both erofs and the pseudo-mount
point of domain_id is erofs_fs_type, so two successive calls to
alloc_super() are considered to be using the same lock and trigger the
warning above.
Therefore add a nodev file_system_type called erofs_anon_fs_type in
fscache.c to silence this complaint. Because kern_mount() takes a
pointer to struct file_system_type, not its (string) name. So we don't
need to call register_filesystem(). In addition, call init_pseudo() in
erofs_anon_init_fs_context() as suggested by Al Viro, so that we can
remove erofs_fc_fill_pseudo_super(), erofs_fc_anon_get_tree(), and
erofs_anon_context_ops.
Suggested-by: Al Viro <viro@zeniv.linux.org.uk>
Fixes: a9849560c55e ("erofs: introduce a pseudo mnt to manage shared cookies")
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Reviewed-and-tested-by: Jingbo Xu <jefflexu@linux.alibaba.com>
Reviewed-by: Yang Erkun <yangerkun@huawei.com>
Link: https://lore.kernel.org/r/20240307101018.2021925-1-libaokun1@huawei.com
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
|
|
Convert erofs_try_to_free_all_cached_pages() and
z_erofs_cache_release_folio().
Besides, erofs_page_is_managed() is moved to zdata.c and renamed
as erofs_folio_is_managed().
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Link: https://lore.kernel.org/r/20240305091448.1384242-6-hsiangkao@linux.alibaba.com
|
|
Use bio_for_each_folio() to iterate over each folio in the bio and
there is no large folios for now.
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Link: https://lore.kernel.org/r/20240305091448.1384242-5-hsiangkao@linux.alibaba.com
|
|
Introduce a folio member to `struct z_erofs_bvec` and convert most
of z_erofs_fill_bio_vec() to folios, which is still straight-forward.
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Link: https://lore.kernel.org/r/20240305091448.1384242-4-hsiangkao@linux.alibaba.com
|
|
`justfound` is introduced to identify cached folios that are just added
to compressed bvecs so that more checks can be applied in the I/O
submission path.
EROFS is quite now stable compared to the codebase at that stage.
`justfound` becomes a burden for upcoming features. Drop it.
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Link: https://lore.kernel.org/r/20240305091448.1384242-3-hsiangkao@linux.alibaba.com
|
|
It is a straight-forward conversion. Besides, it's renamed as
z_erofs_scan_folio().
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Link: https://lore.kernel.org/r/20240305091448.1384242-2-hsiangkao@linux.alibaba.com
|
|
Online folios are locked file-backed folios which will eventually
keep decoded (e.g. decompressed) data of each inode for end users to
utilize. It may belong to a few pclusters and contain other data (e.g.
compressed data for inplace I/Os) temporarily in a time-sharing manner
to reduce memory footprints for low-ended storage devices with high
latencies under heary I/O pressure.
Apart from folio_end_read() usage, it's a straight-forward conversion.
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Link: https://lore.kernel.org/r/20240305091448.1384242-1-hsiangkao@linux.alibaba.com
|
|
We don't need the "out" label any more, so remove "ret" and return
directly on error.
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Kees Cook <keescook@chromium.org>
---
Cc: Eric Biederman <ebiederm@xmission.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Jan Kara <jack@suse.cz>
Cc: linux-mm@kvack.org
Cc: linux-fsdevel@vger.kernel.org
|
|
There is no need to call memset(..., 0, ...) on memory allocated by
kcalloc(). It is already zeroed.
Remove the redundant call.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/fa2597400051c18c6ca11187b0e4b906729991b2.1709972649.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Kees Cook <keescook@chromium.org>
|
|
Replace open-coded encoding logic with the use of conventional XDR
utility functions. Add a tracepoint to make replays observable in
field troubleshooting situations.
The WARN_ON is removed. A stack trace is of little use, as there is
only one call site for nfsd4_encode_replay(), and a buffer length
shortage here is unlikely.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Cross-merge networking fixes after downstream PR.
No conflicts.
Adjacent changes:
net/core/page_pool_user.c
0b11b1c5c320 ("netdev: let netlink core handle -EMSGSIZE errors")
429679dcf7d9 ("page_pool: fix netlink dump stop/resume")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs
Pull erofs fixes from Gao Xiang:
"The main one is a KMSAN fix which addresses an issue introduced in
this cycle so it'd be much better to fix before releasing, and the
remaining one fixes VMA alignment for THP.
Summary:
- Fix a KMSAN uninit-value issue triggered by a crafted image
- Fix VMA alignment for memory mapped files on THP"
* tag 'erofs-for-6.8-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs:
erofs: apply proper VMA alignment for memory mapped files on THP
erofs: fix uninitialized page cache reported by KMSAN
|
|
This is a long-standing issue that uninterruptible sleep in fanotify
could make system hibernation fail if the usperspace server gets frozen
before the process waiting for the response (as reported e.g. [1][2]).
A few years ago, there was an attempt to switch to interruptible sleep
while waiting [3], but that would lead to EINTR returns from open(2)
and break userspace [4], so it's been changed to only killable [5].
And the core freezer logic had been rewritten [6][7] in v6.1, allowing
freezing in uninterrupted sleep, so we can solve this problem now.
[1] https://lore.kernel.org/lkml/1518774280-38090-1-git-send-email-t.vivek@samsung.com/
[2] https://lore.kernel.org/lkml/c1bb16b7-9eee-9cea-2c96-a512d8b3b9c7@nwra.com/
[3] https://lore.kernel.org/linux-fsdevel/20190213145443.26836-1-jack@suse.cz/
[4] https://lore.kernel.org/linux-fsdevel/d0031e3a-f050-0832-fa59-928a80ffd44b@nwra.com/
[5] https://lore.kernel.org/linux-fsdevel/20190221105558.GA20921@quack2.suse.cz/
[6] https://lore.kernel.org/lkml/20220822114649.055452969@infradead.org/
[7] https://lore.kernel.org/lkml/20230908-avoid-spurious-freezer-wakeups-v4-0-6155aa3dafae@quicinc.com/
Signed-off-by: Winston Wen <wentao@uniontech.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Message-Id: <BD33543C483B89AB+20240305061804.1186796-1-wentao@uniontech.com>
|
|
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/krisman/unicode into vfs.misc
Merge case-insensitive updates from Gabriel Krisman Bertazi:
- Patch case-insensitive lookup by trying the case-exact comparison
first, before falling back to costly utf8 casefolded comparison.
- Fix to forbid using a case-insensitive directory as part of an
overlayfs mount.
- Patchset to ensure d_op are set at d_alloc time for fscrypt and
casefold volumes, ensuring filesystem dentries will all have the
correct ops, whether they come from a lookup or not.
* tag 'for-next-6.9' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/krisman/unicode:
libfs: Drop generic_set_encrypted_ci_d_ops
ubifs: Configure dentry operations at dentry-creation time
f2fs: Configure dentry operations at dentry-creation time
ext4: Configure dentry operations at dentry-creation time
libfs: Add helper to choose dentry operations at mount-time
libfs: Merge encrypted_ci_dentry_ops and ci_dentry_ops
fscrypt: Drop d_revalidate once the key is added
fscrypt: Drop d_revalidate for valid dentries during lookup
fscrypt: Factor out a helper to configure the lookup dentry
ovl: Always reject mounting over case-insensitive directories
libfs: Attempt exact-match comparison first during casefolded lookup
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Chandan reported a AGI/AGF lock order hang on xfs/168 during recent
testing. The cause of the problem was the task running xfs_growfs
to shrink the filesystem. A failure occurred trying to remove the
free space from the btrees that the shrink would make disappear,
and that meant it ran the error handling for a partial failure.
This error path involves restoring the per-ag block reservations,
and that requires calculating the amount of space needed to be
reserved for the free inode btree. The growfs operation hung here:
[18679.536829] down+0x71/0xa0
[18679.537657] xfs_buf_lock+0xa4/0x290 [xfs]
[18679.538731] xfs_buf_find_lock+0xf7/0x4d0 [xfs]
[18679.539920] xfs_buf_lookup.constprop.0+0x289/0x500 [xfs]
[18679.542628] xfs_buf_get_map+0x2b3/0xe40 [xfs]
[18679.547076] xfs_buf_read_map+0xbb/0x900 [xfs]
[18679.562616] xfs_trans_read_buf_map+0x449/0xb10 [xfs]
[18679.569778] xfs_read_agi+0x1cd/0x500 [xfs]
[18679.573126] xfs_ialloc_read_agi+0xc2/0x5b0 [xfs]
[18679.578708] xfs_finobt_calc_reserves+0xe7/0x4d0 [xfs]
[18679.582480] xfs_ag_resv_init+0x2c5/0x490 [xfs]
[18679.586023] xfs_ag_shrink_space+0x736/0xd30 [xfs]
[18679.590730] xfs_growfs_data_private.isra.0+0x55e/0x990 [xfs]
[18679.599764] xfs_growfs_data+0x2f1/0x410 [xfs]
[18679.602212] xfs_file_ioctl+0xd1e/0x1370 [xfs]
trying to get the AGI lock. The AGI lock was held by a fstress task
trying to do an inode allocation, and it was waiting on the AGF
lock to allocate a new inode chunk on disk. Hence deadlock.
The fix for this is for the growfs code to hold the AGI over the
transaction roll it does in the error path. It already holds the AGF
locked across this, and that is what causes the lock order inversion
in the xfs_ag_resv_init() call.
Reported-by: Chandan Babu R <chandanbabu@kernel.org>
Fixes: 46141dc891f7 ("xfs: introduce xfs_ag_shrink_space()")
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
|
|
There are mainly two reasons that thp_get_unmapped_area() should be
used for EROFS as other filesystems:
- It's needed to enable PMD mappings as a FSDAX filesystem, see
commit 74d2fad1334d ("thp, dax: add thp_get_unmapped_area for pmd
mappings");
- It's useful together with large folios and
CONFIG_READ_ONLY_THP_FOR_FS which enable THPs for mmapped files
(e.g. shared libraries) even without FSDAX. See commit 1854bc6e2420
("mm/readahead: Align file mappings for non-DAX").
Fixes: 06252e9ce05b ("erofs: dax support for non-tailpacking regular file")
Fixes: ce529cc25b18 ("erofs: enable large folios for iomap mode")
Fixes: e6687b89225e ("erofs: enable large folios for fscache mode")
Reviewed-by: Jingbo Xu <jefflexu@linux.alibaba.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Link: https://lore.kernel.org/r/20240306053138.2240206-1-hsiangkao@linux.alibaba.com
|
|
syzbot reports a KMSAN reproducer [1] which generates a crafted
filesystem image and causes IMA to read uninitialized page cache.
Later, (rq->outputsize > rq->inputsize) will be formally supported
after either large uncompressed pclusters (> block size) or big
lclusters are landed. However, currently there is no way to generate
such filesystems by using mkfs.erofs.
Thus, let's mark this condition as unsupported for now.
[1] https://lore.kernel.org/r/0000000000002be12a0611ca7ff8@google.com
Reported-and-tested-by: syzbot+7bc44a489f0ef0670bd5@syzkaller.appspotmail.com
Fixes: 1ca01520148a ("erofs: refine z_erofs_transform_plain() for sub-page block support")
Reviewed-by: Sandeep Dhavale <dhavale@google.com>
Reviewed-by: Yue Hu <huyue2@coolpad.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Link: https://lore.kernel.org/r/20240304035339.425857-1-hsiangkao@linux.alibaba.com
|
|
This flag is only set by one single user: the magical core dumping code
that looks up user pages one by one, and then writes them out using
their kernel addresses (by using a BVEC_ITER).
That actually ends up being a huge problem, because while we do use
copy_mc_to_kernel() for this case and it is able to handle the possible
machine checks involved, nothing else is really ready to handle the
failures caused by the machine check.
In particular, as reported by Tong Tiangen, we don't actually support
fault_in_iov_iter_readable() on a machine check area.
As a result, the usual logic for writing things to a file under a
filesystem lock, which involves doing a copy with page faults disabled
and then if that fails trying to fault pages in without holding the
locks with fault_in_iov_iter_readable() does not work at all.
We could decide to always just make the MC copy "succeed" (and filling
the destination with zeroes), and that would then create a core dump
file that just ignores any machine checks.
But honestly, this single special case has been problematic before, and
means that all the normal iov_iter code ends up slightly more complex
and slower.
See for example commit c9eec08bac96 ("iov_iter: Don't deal with
iter->copy_mc in memcpy_from_iter_mc()") where David Howells
re-organized the code just to avoid having to check the 'copy_mc' flags
inside the inner iov_iter loops.
So considering that we have exactly one user, and that one user is a
non-critical special case that doesn't actually ever trigger in real
life (Tong found this with manual error injection), the sane solution is
to just decide that the onus on handling the machine check lines on that
user instead.
Ergo, do the copy_mc_to_kernel() in the core dump logic itself, copying
the user data to a stable kernel page before writing it out.
Fixes: f1982740f5e7 ("iov_iter: Convert iterate*() to inline funcs")
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Tong Tiangen <tongtiangen@huawei.com>
Link: https://lore.kernel.org/r/20240305133336.3804360-1-tongtiangen@huawei.com
Link: https://lore.kernel.org/all/4e80924d-9c85-f13a-722a-6a5d2b1c225a@huawei.com/
Tested-by: David Howells <dhowells@redhat.com>
Reviewed-by: David Howells <dhowells@redhat.com>
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Reported-by: Tong Tiangen <tongtiangen@huawei.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
During fiemap we may have to visit multiple leaves of the subvolume's
inode tree, and each time we are freeing and allocating an extent buffer
to use as a clone of each visited leaf. Optimize this by reusing cloned
extent buffers, to avoid the freeing and re-allocation both of the extent
buffer structure itself and more importantly of the pages attached to the
extent buffer.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
For fiemap we recently stopped locking the target extent range for the
whole duration of the fiemap call, in order to avoid a deadlock in a
scenario where the fiemap buffer happens to be a memory mapped range of
the same file. This use case is very unlikely to be useful in practice but
it may be triggered by fuzz testing (syzbot, etc).
This however introduced a race that makes us miss delalloc ranges for
file regions that are currently holes, so the caller of fiemap will not
be aware that there's data for some file regions. This can be quite
serious for some use cases - for example in coreutils versions before 9.0,
the cp program used fiemap to detect holes and data in the source file,
copying only regions with data (extents or delalloc) from the source file
to the destination file in order to preserve holes (see the documentation
for its --sparse command line option). This means that if cp was used
with a source file that had delalloc in a hole, the destination file could
end up without that data, which is effectively a data loss issue, if it
happened to hit the race described below.
The race happens like this:
1) Fiemap is called, without the FIEMAP_FLAG_SYNC flag, for a file that
has delalloc in the file range [64M, 65M[, which is currently a hole;
2) Fiemap locks the inode in shared mode, then starts iterating the
inode's subvolume tree searching for file extent items, without having
the whole fiemap target range locked in the inode's io tree - the
change introduced recently by commit b0ad381fa769 ("btrfs: fix
deadlock with fiemap and extent locking"). It only locks ranges in
the io tree when it finds a hole or prealloc extent since that
commit;
3) Note that fiemap clones each leaf before using it, and this is to
avoid deadlocks when locking a file range in the inode's io tree and
the fiemap buffer is memory mapped to some file, because writing
to the page with btrfs_page_mkwrite() will wait on any ordered extent
for the page's range and the ordered extent needs to lock the range
and may need to modify the same leaf, therefore leading to a deadlock
on the leaf;
4) While iterating the file extent items in the cloned leaf before
finding the hole in the range [64M, 65M[, the delalloc in that range
is flushed and its ordered extent completes - meaning the corresponding
file extent item is in the inode's subvolume tree, but not present in
the cloned leaf that fiemap is iterating over;
5) When fiemap finds the hole in the [64M, 65M[ range by seeing the gap in
the cloned leaf (or a file extent item with disk_bytenr == 0 in case
the NO_HOLES feature is not enabled), it will lock that file range in
the inode's io tree and then search for delalloc by checking for the
EXTENT_DELALLOC bit in the io tree for that range and ordered extents
(with btrfs_find_delalloc_in_range()). But it finds nothing since the
delalloc in that range was already flushed and the ordered extent
completed and is gone - as a result fiemap will not report that there's
delalloc or an extent for the range [64M, 65M[, so user space will be
mislead into thinking that there's a hole in that range.
This could actually be sporadically triggered with test case generic/094
from fstests, which reports a missing extent/delalloc range like this:
generic/094 2s ... - output mismatch (see /home/fdmanana/git/hub/xfstests/results//generic/094.out.bad)
--- tests/generic/094.out 2020-06-10 19:29:03.830519425 +0100
+++ /home/fdmanana/git/hub/xfstests/results//generic/094.out.bad 2024-02-28 11:00:00.381071525 +0000
@@ -1,3 +1,9 @@
QA output created by 094
fiemap run with sync
fiemap run without sync
+ERROR: couldn't find extent at 7
+map is 'HHDDHPPDPHPH'
+logical: [ 5.. 6] phys: 301517.. 301518 flags: 0x800 tot: 2
+logical: [ 8.. 8] phys: 301520.. 301520 flags: 0x800 tot: 1
...
(Run 'diff -u /home/fdmanana/git/hub/xfstests/tests/generic/094.out /home/fdmanana/git/hub/xfstests/results//generic/094.out.bad' to see the entire diff)
So in order to fix this, while still avoiding deadlocks in the case where
the fiemap buffer is memory mapped to the same file, change fiemap to work
like the following:
1) Always lock the whole range in the inode's io tree before starting to
iterate the inode's subvolume tree searching for file extent items,
just like we did before commit b0ad381fa769 ("btrfs: fix deadlock with
fiemap and extent locking");
2) Now instead of writing to the fiemap buffer every time we have an extent
to report, write instead to a temporary buffer (1 page), and when that
buffer becomes full, stop iterating the file extent items, unlock the
range in the io tree, release the search path, submit all the entries
kept in that buffer to the fiemap buffer, and then resume the search
for file extent items after locking again the remainder of the range in
the io tree.
The buffer having a size of a page, allows for 146 entries in a system
with 4K pages. This is a large enough value to have a good performance
by avoiding too many restarts of the search for file extent items.
In other words this preserves the huge performance gains made in the
last two years to fiemap, while avoiding the deadlocks in case the
fiemap buffer is memory mapped to the same file (useless in practice,
but possible and exercised by fuzz testing and syzbot).
Fixes: b0ad381fa769 ("btrfs: fix deadlock with fiemap and extent locking")
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
At contains_pending_extent() the value of the end offset of a chunk we
found in the device's allocation state io tree is inclusive, so when
we calculate the length we pass to the in_range() macro, we must sum
1 to the expression "physical_end - physical_offset".
In practice the wrong calculation should be harmless as chunks sizes
are never 1 byte and we should never have 1 byte ranges of unallocated
space. Nevertheless fix the wrong calculation.
Reported-by: Alex Lyakas <alex.lyakas@zadara.com>
Link: https://lore.kernel.org/linux-btrfs/CAOcd+r30e-f4R-5x-S7sV22RJPe7+pgwherA6xqN2_qe7o4XTg@mail.gmail.com/
Fixes: 1c11b63eff2a ("btrfs: replace pending/pinned chunks lists with io tree")
CC: stable@vger.kernel.org # 6.1+
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
same parent
Currently "btrfs subvolume snapshot -i <qgroupid>" would always mark the
qgroup inconsistent.
This can be annoying if the fs has a lot of snapshots, and needs qgroup
to get the accounting for the amount of bytes it can free for each
snapshot.
Although we have the new simple quote as a solution, there is also a
case where we can skip the full scan, if all the following conditions
are met:
- The source subvolume belongs to a higher level parent qgroup
- The parent qgroup already owns all its bytes exclusively
- The new snapshot is also added to the same parent qgroup
In that case, we only need to add nodesize to the parent qgroup and
avoid a full rescan.
This patch would add the extra quick accounting update for such inherit.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
[BUG]
Currently btrfs can create subvolume with an invalid qgroup inherit
without triggering any error:
# mkfs.btrfs -O quota -f $dev
# mount $dev $mnt
# btrfs subvolume create -i 2/0 $mnt/subv1
# btrfs qgroup show -prce --sync $mnt
Qgroupid Referenced Exclusive Path
-------- ---------- --------- ----
0/5 16.00KiB 16.00KiB <toplevel>
0/256 16.00KiB 16.00KiB subv1
[CAUSE]
We only do a very basic size check for btrfs_qgroup_inherit structure,
but never really verify if the values are correct.
Thus in btrfs_qgroup_inherit() function, we have to skip non-existing
qgroups, and never return any error.
[FIX]
Fix the behavior and introduce extra checks:
- Introduce early check for btrfs_qgroup_inherit structure
Not only the size, but also all the qgroup ids would be verified.
And the timing is very early, so we can return error early.
This early check is very important for snapshot creation, as snapshot
is delayed to transaction commit.
- Drop support for btrfs_qgroup_inherit::num_ref_copies and
num_excl_copies
Those two members are used to specify to copy refr/excl numbers from
other qgroups.
This would definitely mark qgroup inconsistent, and btrfs-progs has
dropped the support for them for a long time.
It's time to drop the support for kernel.
- Verify the supported btrfs_qgroup_inherit::flags
Just in case we want to add extra flags for btrfs_qgroup_inherit.
Now above subvolume creation would fail with -ENOENT other than silently
ignore the non-existing qgroup.
CC: stable@vger.kernel.org # 6.7+
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
To better debug issues surrounding device scans, include the device's
major and minor numbers in the device scan notice for btrfs.
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: Sweet Tea Dorminy <sweettea-kernel@dorminy.me>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
btrfs_put_caching_control() is only used in block-group.c, so mark it
static.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Lijuan Li <lilijuan@iscas.ac.cn>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
The SLAB_MEM_SPREAD flag used to be implemented in SLAB, which was
removed as of v6.8-rc1, so it became a dead flag since the commit
16a1d968358a ("mm/slab: remove mm/slab.c and slab_def.h"). And the
series[1] went on to mark it obsolete to avoid confusion for users.
Here we can just remove all its users, which has no functional change.
[1] https://lore.kernel.org/all/20240223-slab-cleanup-flags-v2-1-02f1753e8303@suse.cz/
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Chengming Zhou <zhouchengming@bytedance.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
[BUG]
If qgroup is marked inconsistent (e.g. caused by operations needing full
subtree rescan, like creating a snapshot and assign to a higher level
qgroup), btrfs would immediately start leaking its data reserved space.
The following script can easily reproduce it:
mkfs.btrfs -O quota -f $dev
mount $dev $mnt
btrfs subvolume create $mnt/subv1
btrfs qgroup create 1/0 $mnt
# This snapshot creation would mark qgroup inconsistent,
# as the ownership involves different higher level qgroup, thus
# we have to rescan both source and snapshot, which can be very
# time consuming, thus here btrfs just choose to mark qgroup
# inconsistent, and let users to determine when to do the rescan.
btrfs subv snapshot -i 1/0 $mnt/subv1 $mnt/snap1
# Now this write would lead to qgroup rsv leak.
xfs_io -f -c "pwrite 0 64k" $mnt/file1
# And at unmount time, btrfs would report 64K DATA rsv space leaked.
umount $mnt
And we would have the following dmesg output for the unmount:
BTRFS info (device dm-1): last unmount of filesystem 14a3d84e-f47b-4f72-b053-a8a36eef74d3
BTRFS warning (device dm-1): qgroup 0/5 has unreleased space, type 0 rsv 65536
[CAUSE]
Since commit e15e9f43c7ca ("btrfs: introduce
BTRFS_QGROUP_RUNTIME_FLAG_NO_ACCOUNTING to skip qgroup accounting"),
we introduce a mode for btrfs qgroup to skip the timing consuming
backref walk, if the qgroup is already inconsistent.
But this skip also covered the data reserved freeing, thus the qgroup
reserved space for each newly created data extent would not be freed,
thus cause the leakage.
[FIX]
Make the data extent reserved space freeing mandatory.
The qgroup reserved space handling is way cheaper compared to the
backref walking part, and we always have the super sensitive leak
detector, thus it's definitely worth to always free the qgroup
reserved data space.
Reported-by: Fabian Vogt <fvogt@suse.com>
Fixes: e15e9f43c7ca ("btrfs: introduce BTRFS_QGROUP_RUNTIME_FLAG_NO_ACCOUNTING to skip qgroup accounting")
CC: stable@vger.kernel.org # 6.1+
Link: https://bugzilla.suse.com/show_bug.cgi?id=1216196
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
[BUG]
There is a bug report about very suspicious tree-checker got triggered:
BTRFS critical (device dm-0): corrupted node, root=256
block=8550954455682405139 owner mismatch, have 11858205567642294356
expect [256, 18446744073709551360]
BTRFS critical (device dm-0): corrupted node, root=256
block=8550954455682405139 owner mismatch, have 11858205567642294356
expect [256, 18446744073709551360]
BTRFS critical (device dm-0): corrupted node, root=256
block=8550954455682405139 owner mismatch, have 11858205567642294356
expect [256, 18446744073709551360]
SELinux: inode_doinit_use_xattr: getxattr returned 117 for dev=dm-0
ino=5737268
[ANALYZE]
The root cause is still unclear, but there are some clues already:
- Unaligned eb bytenr
The block bytenr is 8550954455682405139, which is not even aligned to
2.
This bytenr is fetched from extent buffer header, not from eb->start.
This means, at the initial time of read, eb header bytenr is still
correct (the very basis check to continue read), but later something
wrong happened, got at least the first page corrupted.
Thus we got such obviously incorrect value.
- Invalid extent buffer header owner
The read itself is triggered for subvolume 256, but the eb header
owner is 11858205567642294356, which is not really possible.
The problem here is, subvolume id is limited to (1 << 48 - 1),
and this one definitely goes beyond that limit.
So this value is another garbage.
We already got two garbage from an extent buffer, which passed the
initial bytenr and csum checks, but later the contents become garbage at
some point.
This looks like a page lifespan problem (e.g. we didn't properly hold the
page).
[ENHANCEMENT]
The current tree-checker only outputs things from the extent buffer,
nothing with the page status.
So this patch would enhance the tree-checker output by also dumping the
first page, which would look like this:
page:00000000aa9f3ce8 refcount:4 mapcount:0 mapping:00000000169aa6b6 index:0x1d0c pfn:0x1022e5
memcg:ffff888103456000
aops:btree_aops [btrfs] ino:1
flags: 0x2ffff0000008000(private|node=0|zone=2|lastcpupid=0xffff)
page_type: 0xffffffff()
raw: 02ffff0000008000 0000000000000000 dead000000000122 ffff88811e06e220
raw: 0000000000001d0c ffff888102fdb1d8 00000004ffffffff ffff888103456000
page dumped because: eb page dump
BTRFS critical (device dm-3): corrupt leaf: root=5 block=30457856 slot=6 ino=257 file_offset=0, invalid disk_bytenr for file extent, have 10617606235235216665, should be aligned to 4096
BTRFS error (device dm-3): read time tree block corruption detected on logical 30457856 mirror 1
From the dump we can see some extra info, something can help us to do
extra cross-checks:
- Page refcount
if it's too low, it definitely means something bad.
- Page aops
Any mapped eb page should have btree_aops with inode number 1.
- Page index
Since a mapped eb page should has its bytenr matching the page
position, (index << PAGE_SHIFT) should match the bytenr of the
bytenr from the critical line.
- Page Private flags
A mapped eb page should have Private flag set to indicate it's managed
by btrfs.
Link: https://lore.kernel.org/linux-btrfs/CAHk-=whNdMaN9ntZ47XRKP6DBes2E5w7fi-0U3H2+PS18p+Pzw@mail.gmail.com/
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Since commit a440d48c7f93 ("Btrfs: heuristic: implement sampling
logic"), btrfs_compress_heuristic() is no longer a simple "return true",
but more complex to determine if we should compress.
Thus the comment is dead and can be confusing, just remove it.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
For the writer counter, it's pretty much the same as the reader counter,
and they are exclusive. So move them to the new locked bitmap.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Currently btrfs_subpage utilizes its atomic member @reader to manage the
reader counter. However it is only utilized to prevent the page to be
released/unlocked when we still have reads underway.
In that use case, we don't really allow multiple readers on the same
subpage sector. So here we can introduce a new locked bitmap to
represent exactly which subpage range is locked for read.
In theory we can remove btrfs_subpage::reader as it's just the set bits
of the new locked bitmap. But unfortunately bitmap doesn't provide such
handy API yet, so we still keep the reader counter.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
btrfs_subpage_end_and_test_writer()
Both functions were introduced in commit 1e1de38792e0 ("btrfs: make
process_one_page() to handle subpage locking"), but they have never
been utilized out of subpage code. So just unexport them.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
We can pass a valid em cache pointer down to __get_extent_map() and
drop the validity check. This avoids the special case, the call stacks
are simple:
btrfs_read_folio
btrfs_do_readpage
__get_extent_map
extent_readahead
contiguous_readpages
btrfs_do_readpage
__get_extent_map
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
its limit
The NFS server should ask clients to voluntarily return unused
delegations when the number of granted delegations reaches the
max_delegations. This is so that the server can continue to
grant delegations for new requests.
Signed-off-by: Dai Ngo <dai.ngo@oracle.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Tested-by: Chen Hanxiao <chenhx.fnst@fujitsu.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Add an explanation to prevent the future removal of the fill-
attribute call sites in nfsd_setattr(). Some NFSv3 client
implementations don't behave correctly if wcc data is not present in
an NFSv3 SETATTR reply.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
The SLAB_MEM_SPREAD flag is already a no-op after removal of SLAB
allocator and in [1] it was fully deprecated. Remove its usage so we can
delete it from slab. No functional change.
Signed-off-by: Chengming Zhou <zhouchengming@bytedance.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/all/20240223-slab-cleanup-flags-v2-1-02f1753e8303@suse.cz/
Message-Id: <20240224135229.830356-1-chengming.zhou@linux.dev>
|
|
The SLAB_MEM_SPREAD flag is already a no-op after removal of SLAB
allocator and in [1] it was fully deprecated. Remove its usage so we can
delete it from slab. No functional change.
Signed-off-by: Chengming Zhou <zhouchengming@bytedance.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/all/20240223-slab-cleanup-flags-v2-1-02f1753e8303@suse.cz/
Message-Id: <20240224135118.830073-1-chengming.zhou@linux.dev>
|
|
The SLAB_MEM_SPREAD flag is already a no-op after removal of SLAB
allocator and in [1] it was fully deprecated. Remove its usage so we can
delete it from slab. No functional change.
Signed-off-by: Chengming Zhou <zhouchengming@bytedance.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/all/20240223-slab-cleanup-flags-v2-1-02f1753e8303@suse.cz/
Message-Id: <20240224134901.829591-1-chengming.zhou@linux.dev>
|
|
The SLAB_MEM_SPREAD flag is already a no-op after removal of SLAB
allocator and in [1] it was fully deprecated. Remove its usage so we can
delete it from slab. No functional change.
Signed-off-by: Chengming Zhou <zhouchengming@bytedance.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/all/20240223-slab-cleanup-flags-v2-1-02f1753e8303@suse.cz/
Message-Id: <20240224134816.829424-1-chengming.zhou@linux.dev>
|
|
The first kiocb_set_cancel_fn() argument may point at a struct kiocb
that is not embedded inside struct aio_kiocb. With the current code,
depending on the compiler, the req->ki_ctx read happens either before
the IOCB_AIO_RW test or after that test. Move the req->ki_ctx read such
that it is guaranteed that the IOCB_AIO_RW test happens first.
Reported-by: Eric Biggers <ebiggers@kernel.org>
Cc: Benjamin LaHaise <ben@communityfibre.ca>
Cc: Eric Biggers <ebiggers@google.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Avi Kivity <avi@scylladb.com>
Cc: Sandeep Dhavale <dhavale@google.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Kent Overstreet <kent.overstreet@linux.dev>
Cc: stable@vger.kernel.org
Fixes: b820de741ae4 ("fs/aio: Restrict kiocb_set_cancel_fn() to I/O submitted via libaio")
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20240304235715.3790858-1-bvanassche@acm.org
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Reviewed-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Patch "fs/aio: Make io_cancel() generate completions again" is based on the
assumption that calling kiocb->ki_cancel() does not complete R/W requests.
This is incorrect: the two drivers that call kiocb_set_cancel_fn() callers
set a cancellation function that calls usb_ep_dequeue(). According to its
documentation, usb_ep_dequeue() calls the completion routine with status
-ECONNRESET. Hence this revert.
Cc: Benjamin LaHaise <ben@communityfibre.ca>
Cc: Eric Biggers <ebiggers@google.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Avi Kivity <avi@scylladb.com>
Cc: Sandeep Dhavale <dhavale@google.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Kent Overstreet <kent.overstreet@linux.dev>
Cc: stable@vger.kernel.org
Reported-by: syzbot+b91eb2ed18f599dd3c31@syzkaller.appspotmail.com
Fixes: 54cbc058d86b ("fs/aio: Make io_cancel() generate completions again")
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20240304182945.3646109-1-bvanassche@acm.org
Acked-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
gitolite.kernel.org:pub/scm/linux/kernel/git/vfs/vfs
Pull write hint fix from Christian Brauner:
UFS devices are widely used in mobile applications, e.g. in smartphones.
UFS vendors need data lifetime information to achieve good performance.
Providing data lifetime information to UFS devices can result in up to
40% lower write amplification. Hence this patch series that restores the
bi_write_hint member in struct bio. After this patch series has been
merged, patches that implement data lifetime support in the SCSI disk
(sd) driver will be sent to the Linux kernel SCSI maintainer.
The following changes are included in this patch series:
- Improvements for the F_GET_RW_HINT and F_SET_RW_HINT fcntls.
- Move enum rw_hint into a new header file.
- Support F_SET_RW_HINT for block devices to make it easy to test data
lifetime support.
- Restore the bio.bi_write_hint member and restore support in the VFS
layer and also in the block layer for data lifetime information.
The shell script that has been used to test the patch series combined
with the SCSI patches is available at the end of this cover letter.
* tag 'vfs-6.9.rw_hint' of gitolite.kernel.org:pub/scm/linux/kernel/git/vfs/vfs:
block, fs: Restore the per-bio/request data lifetime fields
fs: Propagate write hints to the struct block_device inode
fs: Move enum rw_hint into a new header file
fs: Split fcntl_rw_hint()
fs: Verify write lifetime constants at compile time
fs: Fix rw_hint validation
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
The helpers btrfs_del_delalloc_inode() and __btrfs_del_delalloc_inode()
don't follow the pattern when the "__" helper does a special case and
are in fact reversed regarding the naming. We can merge them into one as
there's only one place that needs to be open coded.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Replace the two parameters bdev and name by one that can be used to get
them both.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Other errors in flush_reservations() are handled and also in the caller.
Ignoring commit might make some sense as it's called right after join so
it's to poke the whole commit machinery to free space.
However for consistency return the error. The caller
btrfs_quota_disable() would try to start the transaction which would
in turn fail too so there's no effective change.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Use the KMEM_CACHE() macro instead of kmem_cache_create() to simplify
the creation of SLAB caches when the default values are used.
Signed-off-by: Kunwu Chan <chentao@kylinos.cn>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Use the KMEM_CACHE() macro instead of kmem_cache_create() to simplify
the creation of SLAB caches related to delayed refs when the default
values are used.
Signed-off-by: Kunwu Chan <chentao@kylinos.cn>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
