summaryrefslogtreecommitdiff
path: root/include/drm/drm_dp_helper.h
AgeCommit message (Collapse)AuthorFilesLines
2021-11-18drm/dp, drm/i915: Add support for VESA backlights using PWM for brightness ↵Lyude Paul1-3/+4
control Now that we've added support to i915 for controlling panel backlights that need PWM to be enabled/disabled, let's finalize this and add support for controlling brightness levels via PWM as well. This should hopefully put us towards the path of supporting _ALL_ backlights via VESA's DPCD interface which would allow us to finally start trusting the DPCD again. Note however that we still don't enable using this by default on i915 when it's not needed, primarily because I haven't yet had a chance to confirm if it's safe to do this on the one machine in Intel's CI that had an issue with this: samus-fi-bdw. I have done basic testing of this on other machines though, by manually patching i915 to force it into PWM-only mode on some of my laptops. v2: * Correct documentation (thanks Doug!) * Get rid of backlight caps Signed-off-by: Lyude Paul <lyude@redhat.com> Reviewed-by: Doug Anderson <dianders@chromium.org> Cc: Rajeev Nandan <rajeevny@codeaurora.org> Cc: Satadru Pramanik <satadru@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20211105183342.130810-5-lyude@redhat.com
2021-10-25Merge drm/drm-next into drm-misc-nextMaxime Ripard1-0/+6
drm-misc-next hasn't been updated in a while and I need a post -rc2 state to merge some vc4 patches. Signed-off-by: Maxime Ripard <maxime@cerno.tech>
2021-10-19drm/dp: add helpers to read link training delaysJani Nikula1-2/+19
The link training delays are different and/or available in different DPCD offsets depending on: - Clock recovery vs. channel equalization - DPRX vs. LTTPR - 128b/132b vs. 8b/10b - DPCD 1.4+ vs. earlier Add helpers to get the correct delays in us, reading DPCD if necessary. This is more straightforward than trying to retrofit the existing helpers to take 128b/132b into account. Having to pass in the DPCD receiver cap field seems unavoidable, because reading it involves checking the revision and reading extended receiver cap. So unfortunately the interface is mixed cached and read as needed. v2: Remove delay_us < 0 check and the whole local var (Ville) Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20211014150059.28957-1-jani.nikula@intel.com
2021-10-11Merge tag 'drm-intel-next-2021-10-04' of ↵Dave Airlie1-0/+6
git://anongit.freedesktop.org/drm/drm-intel into drm-next Cross-subsystem Changes: - fbdev/efifb: Release PCI device's runtime PM ref during FB destr\ oy (Imre) i915 Core Driver Changes: - Only access SFC_DONE in media when not fused off for graphics 12 and newer. - Double Memory latency values from pcode for DG2 (Matt Roper) - ADL-S PCI ID update (Tejas) - New DG1 PCI ID (Jose) - Fix regression with uncore refactoring (Dave) i915 Display Changes: - ADL-P display (XE_LPD) fixes and updates (Ankit, Jani, Matt Roper, Anusham, Jose, Imre, Vandita) - DG2 display fixes (Ankit, Jani) - Expand PCH_CNP tweaked display workaround to all newer displays (Anshuman) - General display simplifications and clean-ups (Jani, Swati, Jose, Ville) - PSR Clean-ups, dropping support for BDW/HSD and enable PSR2 selective fetch by default (Jose, Gwan-gyeong) - Nuke ORIGIN_GTT (Jose) - Return proper DPRX link training result (Lee) - FBC related refactor and fixes (Ville) - Yet another attempt to solve the fast+narrow vs slow+wide eDP link training (Kai-Heng) - DP 2.0 preparation work (Jani) - Silence __iomem sparse warn (Ville) - Clean up DPLL stuff (Ville) - Fix various dp/edp max rates (Matt Atwood, Animesh, Jani) - Remove VBT ddi_port_info caching (Jani) - DSI driver improvements (Lee) - HDCP fixes (Juston) - Associate ACPI connector nodes with connector entries (Heikki) - Add support for out-of-bound hotplug events (Hans) - VESA vendor block and drm/i915 MSO use of it (Jani) - Fixes for bigjoiner (Ville) - Update memory bandwidth parameters (RK) - DMC related fixes (Chris, Jose) - HDR related fixes and improvements (Tejas) - g4x/vlv/chv CxSR/wm fixes/cleanups (Ville) - Use BIOS provided value for RKL Audio's HDA link (Kai-Heng) - Fix the dsc check while selecting min_cdclk (Vandita) - Split and constify vtable (Dave) - Add ww context to intel_dpt_pin (Maarten) - Fix bdb version check (Lukasz) - DP per-lane drive settings prep work and other DP fixes (Ville) Signed-off-by: Dave Airlie <airlied@redhat.com> # gpg: Signature made Tue 05 Oct 2021 04:58:16 AEST # gpg: using RSA key 6D207068EEDD65091C2CE2A3FA625F640EEB13CA # gpg: Good signature from "Rodrigo Vivi <rodrigo.vivi@intel.com>" [unknown] # gpg: aka "Rodrigo Vivi <rodrigo.vivi@gmail.com>" [unknown] # gpg: WARNING: This key is not certified with a trusted signature! # gpg: There is no indication that the signature belongs to the owner. # Primary key fingerprint: 6D20 7068 EEDD 6509 1C2C E2A3 FA62 5F64 0EEB 13CA From: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/YVtPk6llsxBFiw7W@intel.com
2021-10-01drm/dp: Add Additional DP2 HeadersFangzhi Zuo1-0/+20
Include FEC, DSC, Link Training related headers. Change since v2 - Align with the spec for DP_DSC_SUPPORT_AND_DSC_DECODER_COUNT Signed-off-by: Fangzhi Zuo <Jerry.Zuo@amd.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Rodrigo Siqueira <rodrigosiqueiramelo@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210927192324.5428-1-Jerry.Zuo@amd.com
2021-09-20drm/dp: add helper for extracting adjust 128b/132b TX FFE presetJani Nikula1-0/+2
The DP 2.0 128b/132b channel coding uses TX FFE presets instead of vswing and pre-emphasis. Cc: dri-devel@lists.freedesktop.org Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Acked-by: Maxime Ripard <mripard@kernel.org> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/4ba129c51aeb01a5f210de7026abe704a554a178.1631191763.git.jani.nikula@intel.com
2021-09-20drm/dp: add LTTPR DP 2.0 DPCD addressesJani Nikula1-0/+4
DP 2.0 brings some new DPCD addresses for PHY repeaters. Cc: dri-devel@lists.freedesktop.org Reviewed-by: Manasi Navare <manasi.d.navare@intel.com> Acked-by: Maxime Ripard <mripard@kernel.org> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/def17e2329722f22c35807be26b35590ccb93bfd.1631191763.git.jani.nikula@intel.com
2021-07-21Merge tag 'drm-misc-next-2021-07-16' of ↵Dave Airlie1-33/+142
git://anongit.freedesktop.org/drm/drm-misc into drm-next drm-misc-next for v5.15: UAPI Changes: Cross-subsystem Changes: - udmabuf: Add support for mapping hugepages - Add dma-buf stats to sysfs. - Assorted fixes to fbdev/omap2. - dma-buf: Document DMA_BUF_IOCTL_SYNC - Improve dma-buf non-dynamic exporter expectations better. - Add module parameters for dma-buf size and list limit. - Add HDMI codec support to vc4, to replace vc4's own codec. - Document dma-buf implicit fencing rules. - dma_resv_test_signaled test_all handling. Core Changes: - Extract i915's eDP backlight code into DRM helpers. - Assorted docbook updates. - Rework drm_dp_aux documentation. - Add support for the DP aux bus. - Shrink dma-fence-chain slightly. - Add alloc/free helpers for dma-fence-chain. - Assorted fixes to TTM., drm/of, bridge - drm_gem_plane_helper_prepare/cleanup_fb is now the default for gem drivers. - Small fix for scheduler completion. - Remove use of drm_device.irq_enabled. - Print the driver name to dmesg when registering framebuffer. - Export drm/gem's shadow plane handling, and use it in vkms. - Assorted small fixes. Driver Changes: - Add eDP backlight to nouveau. - Assorted fixes and cleanups to nouveau, panfrost, vmwgfx, anx7625, amdgpu, gma500, radeon, mgag200, vgem, vc4, vkms, omapdrm. - Add support for Samsung DB7430, Samsung ATNA33XC20, EDT ETMV570G2DHU, EDT ETM0350G0DH6, Innolux EJ030NA panels. - Fix some simple pannels missing bus_format and connector types. - Add mks-guest-stats instrumentation support to vmwgfx. - Merge i915-ttm topic branch. - Make s6e63m0 panel use Mipi-DBI helpers. - Add detect() supoprt for AST. - Use interrupts for hotplug on vc4. - vmwgfx is now moved to drm-misc-next, as sroland is no longer a maintainer for now. - vmwgfx now uses copies of vmware's internal device headers. - Slowly convert ti-sn65dsi83 over to atomic. - Rework amdgpu dma-resv handling. - Fix virtio fencing for planes. - Ensure amdgpu can always evict to SYSTEM. - Many drivers fixed for implicit fencing rules. - Set default prepare/cleanup fb for tiny, vram and simple helpers too. - Rework panfrost gpu reset and related serialization. - Update VKMS todo list. - Make bochs a tiny gpu driver, and use vram helper. - Use linux irq interfaces instead of drm_irq in some drivers. - Add support for Raspberry Pi Pico to GUD. Signed-off-by: Dave Airlie <airlied@redhat.com> # gpg: Signature made Fri 16 Jul 2021 21:06:04 AEST # gpg: using RSA key B97BD6A80CAC4981091AE547FE558C72A67013C3 # gpg: Good signature from "Maarten Lankhorst <maarten.lankhorst@linux.intel.com>" [expired] # gpg: aka "Maarten Lankhorst <maarten@debian.org>" [expired] # gpg: aka "Maarten Lankhorst <maarten.lankhorst@canonical.com>" [expired] # gpg: Note: This key has expired! # Primary key fingerprint: B97B D6A8 0CAC 4981 091A E547 FE55 8C72 A670 13C3 From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/444811c3-cbec-e9d5-9a6b-9632eda7962a@linux.intel.com
2021-07-13drm/dp: Move panel DP AUX backlight support to drm_dp_helperDouglas Anderson1-0/+16
We were getting a depmod error: depmod: ERROR: Cycle detected: drm_kms_helper -> drm -> drm_kms_helper It looks like the rule is that drm_kms_helper can call into drm, but drm can't call into drm_kms_helper. That means we've got to move the DP AUX backlight support into drm_dp_helper. NOTE: as part of this, I didn't try to do any renames of the main registration function. Even though it's in the drm_dp_helper, it still feels very parallel to drm_panel_of_backlight(). Fixes: 10f7b40e4f30 ("drm/panel: add basic DP AUX backlight support") Reported-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reported-by: Thomas Zimmermann <tzimmermann@suse.de> Signed-off-by: Douglas Anderson <dianders@chromium.org> Reviewed-by: Rajeev Nandan <rajeevny@codeaurora.org> Link: https://patchwork.freedesktop.org/patch/msgid/20210712075933.v2.1.I23eb4cc5a680341e7b3e791632a635566fa5806a@changeid
2021-06-23drm: Mention the power state requirement on side-channel operationsMaxime Ripard1-0/+5
The drm_connector detect, drm_dp_aux transfer and mipi_dsi_host operations typically require to access their underlying device to perform what is expected of them. However, there's no guarantee on the fact that the device has been enabled through atomic_enable or similar that will usually power the device. The access to an unpowered device is then an undefined behaviour ranging from the access being ignored to a hard CPU hang. Let's document that expectation to avoid as much as possible those consequences. Signed-off-by: Maxime Ripard <maxime@cerno.tech> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20210616141529.630719-3-maxime@cerno.tech
2021-06-23drm/dp_helper: Mention the concurrency requirement hw_mutexMaxime Ripard1-0/+4
Drivers that allow concurrent access over multiple DP channels need to provide additional locking, even though the hw_mutex field might indicate otherwise. Clarify it in the documentation. Suggested-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20210616141529.630719-2-maxime@cerno.tech
2021-06-23drm/dp_helper: Rework the drm_dp_aux documentationMaxime Ripard1-33/+69
Split the existing documentation to move the comments on particular fields next to them. Suggested-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20210616141529.630719-1-maxime@cerno.tech
2021-06-16drm/amd/display: Partition DPCD address space and break up transactionsWesley Chalmers1-0/+17
[WHY] SCR for DP 2.0 spec says that multiple LTTPRs must not be accessed in a single AUX transaction. There may be other places in future where breaking up AUX accesses is necessary. [HOW] Partition the entire DPCD address space into blocks. When an incoming AUX request spans multiple blocks, break up the request into multiple requests. Signed-off-by: Wesley Chalmers <Wesley.Chalmers@amd.com> Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Anson Jacob <Anson.Jacob@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-06-09drm/dp: Extract i915's eDP backlight code into DRM helpersLyude Paul1-0/+48
Since we're about to implement eDP backlight support in nouveau using the standard protocol from VESA, we might as well just take the code that's already written for this and move it into a set of shared DRM helpers. Note that these helpers are intended to handle DPCD related backlight control bits such as setting the brightness level over AUX, probing the backlight's TCON, enabling/disabling the backlight over AUX if supported, etc. Any PWM-related portions of backlight control are explicitly left up to the driver, as these will vary from platform to platform. The only exception to this is the calculation of the PWM frequency pre-divider value. This is because the only platform-specific information required for this is the PWM frequency of the panel, which the driver is expected to provide if available. The actual algorithm for calculating this value is standard and is defined in the eDP specification from VESA. Note that these helpers do not yet implement the full range of features the VESA backlight interface provides, and only provide the following functionality (all of which was already present in i915's DPCD backlight support): * Basic control of brightness levels * Basic probing of backlight capabilities * Helpers for enabling and disabling the backlight v3: * Split out changes to i915's backlight code to separate patches to make it easier to review v4: * Style/spelling changes from Thomas Zimmermann v5: * Start using new drm_dbg_*() functions Signed-off-by: Lyude Paul <lyude@redhat.com> Cc: Jani Nikula <jani.nikula@intel.com> Cc: Dave Airlie <airlied@gmail.com> Cc: greg.depoire@gmail.com Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210514181504.565252-9-lyude@redhat.com
2021-05-21Merge tag 'drm-intel-next-2021-05-19-1' of ↵Dave Airlie1-8/+8
git://anongit.freedesktop.org/drm/drm-intel into drm-next Core Changes: - drm: Rename DP_PSR_SELECTIVE_UPDATE to better mach eDP spec (Jose). Driver Changes: - Display plane clock rates fixes and improvements (Ville). - Uninint DMC FW loader state during shutdown (Imre). - Convert snprintf to sysfs_emit (Xuezhi). - Fix invalid access to ACPI _DSM objects (Takashi). - A big refactor around how i915 addresses the graphics and display IP versions. (Matt, Lucas). - Backlight fix (Lyude). - Display watermark and DBUF fixes (Ville). - HDCP fix (Anshuman). - Improve cases where display is not available (Jose). - Defeature PSR2 for RKL and ALD-S (Jose). - VLV DSI panel power fixes and improvements (Hans). - display-12 workaround (Jose). - Fix modesetting (Imre). - Drop redundant address-of op before lttpr_common_caps array (Imre). - Fix compiler checks (Jose, Jason). - GLK display fixes (Ville). - Fix error code returns (Dan). - eDP novel: back again to slow and wide link training everywhere (Kai-Heng). - Abstract DMC FW path (Rodrigo). - Preparation and changes for upcoming XeLPD display IP (Jose, Matt, Ville, Juha-Pekka, Animesh). - Fix comment typo in DSI code (zuoqilin). - Simplify CCS and UV plane alignment handling (Imre). - PSR Fixes on TGL (Gwan-gyeong, Jose). - Add intel_dp_hdcp.h and rename init (Jani). - Move crtc and dpll declarations around (Jani). - Fix pre-skl DP AUX precharge length (Ville). - Remove stray newlines from random files (Ville). - crtc->index and intel_crtc+drm_crtc pointer clean-up (Ville). - Add frontbuffer tracking tracepoints (Ville). - ADL-S PCI ID updates (Anand). - Use unique backlight device names (Jani). - A few clean-ups on i915/audio (Jani). - Use intel_framebuffer instead of drm one on intel_fb functions (Imre). - Add the missing MC CCS/XYUV8888 format support on display >= 12 (Imre). - Nuke display error state (Ville). - ADL-P initial enablement patches starting to land (Clint, Imre, Jose, Umesh, Vandita, Mika). - Display clean-up around VBT and the strap bits (Lucas). - Try YCbCr420 color when RGB fails (Werner). - More PSR fixes and improvements (Jose). - Other generic display code clean-up (Jose, Ville). - Use correct downstream caps for check Src-Ctl mode for PCON (Ankit). - Disable HiZ Raw Stall Optimization on broken gen7 (Simon). Signed-off-by: Dave Airlie <airlied@redhat.com> From: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/YKVioeu0JkUAlR7y@intel.com
2021-05-18Merge drm/drm-next into drm-intel-nextRodrigo Vivi1-22/+22
Time to get back in sync... Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2021-04-28drm/dp: Pass drm_dp_aux to drm_dp*_link_train_channel_eq_delay()Lyude Paul1-2/+4
So that we can start using drm_dbg_*() for drm_dp_link_train_channel_eq_delay() and drm_dp_lttpr_link_train_channel_eq_delay(). Signed-off-by: Lyude Paul <lyude@redhat.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210423184309.207645-7-lyude@redhat.com Reviewed-by: Dave Airlie <airlied@redhat.com>
2021-04-28drm/dp: Pass drm_dp_aux to drm_dp_link_train_clock_recovery_delay()Lyude Paul1-1/+3
So that we can start using drm_dbg_*() in drm_dp_link_train_clock_recovery_delay(). Signed-off-by: Lyude Paul <lyude@redhat.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210423184309.207645-6-lyude@redhat.com Reviewed-by: Dave Airlie <airlied@redhat.com>
2021-04-28drm/dp: Add backpointer to drm_device in drm_dp_auxLyude Paul1-1/+8
This is something that we've wanted for a while now: the ability to actually look up the respective drm_device for a given drm_dp_aux struct. This will also allow us to transition over to using the drm_dbg_*() helpers for debug message printing, as we'll finally have a drm_device to reference for doing so. Note that there is one limitation with this - because some DP AUX adapters exist as platform devices which are initialized independently of their respective DRM devices, one cannot rely on drm_dp_aux->drm_dev to always be non-NULL until drm_dp_aux_register() has been called. We make sure to point this out in the documentation for struct drm_dp_aux. v3: * Add WARN_ON_ONCE() to drm_dp_aux_register() if drm_dev isn't filled out Signed-off-by: Lyude Paul <lyude@redhat.com> Acked-by: Thierry Reding <treding@nvidia.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210423184309.207645-4-lyude@redhat.com Reviewed-by: Dave Airlie <airlied@redhat.com>
2021-04-26drm: Rename DP_PSR_SELECTIVE_UPDATE to better mach eDP specJosé Roberto de Souza1-8/+8
DP_PSR_EN_CFG bit 5 aka "Selective Update Region Scan Line Capture Indication" in eDP spec has a ambiguous name, so renaming to better match specification. While at it, replacing bit shit by BIT() macro and adding the version some registers were added to eDP specification. Cc: <dri-devel@lists.freedesktop.org> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Jani Nikula <jani.nikula@intel.com> Cc: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com> Signed-off-by: José Roberto de Souza <jose.souza@intel.com> Acked-by: Daniel Vetter <daniel.vetter@intel.com> Reviewed-by: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210421220224.200729-1-jose.souza@intel.com
2021-04-09Merge tag 'drm-misc-next-2021-04-09' of ↵Dave Airlie1-22/+22
git://anongit.freedesktop.org/drm/drm-misc into drm-next drm-misc-next for 5.13: UAPI Changes: Cross-subsystem Changes: Core Changes: - bridge: Fix Kconfig dependency - cmdline: Refuse zero width/height mode - ttm: Ignore signaled move fences, ioremap buffer according to mem caching settins Driver Changes: - Conversions to sysfs_emit - tegra: Don't register DP AUX channels before connectors - zynqmp: Fix for an out-of-bound (but within struct padding) memset Signed-off-by: Dave Airlie <airlied@redhat.com> From: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20210409090020.jroa2d4p4qansrpa@gilmour
2021-04-09drm/dp: Fixup kernel docs for struct drm_dp_auxLyude Paul1-22/+22
* Make sure that struct members are referred to using @, otherwise they won't be formatted as such * Make sure to refer to other struct types using & so they link back to each struct's definition * Make sure to precede constant values with % so they're formatted correctly Signed-off-by: Lyude Paul <lyude@redhat.com> Acked-by: Randy Dunlap <rdunlap@infradead.org> Link: https://patchwork.freedesktop.org/patch/msgid/20210326203807.105754-2-lyude@redhat.com
2021-03-31drm/dp_helper: Define options for FRL training for HDMI2.1 PCONAnkit Nautiyal1-2/+4
Currently the FRL training mode (Concurrent, Sequential) and training type (Normal, Extended) are not defined properly and are passed as bool values in drm_helpers for pcon configuration for FRL training. This patch: -Add register masks for Sequential and Normal FRL training options. -Fixes the drm_helpers for FRL Training configuration to use the appropriate masks. -Modifies the calls to the above drm_helpers in i915/intel_dp as per the above change. v2: Re-used the register masks for these options, instead of enum. (Ville) Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Acked-by: Maxime Ripard <mripard@kernel.org> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210323112422.1211-2-ankit.k.nautiyal@intel.com
2021-02-22drm/dp: add MSO related DPCD registersJani Nikula1-0/+5
Add DPCD register definitions for eDP 1.4 Multi-SST Operation. Cc: Nischal Varide <nischal.varide@intel.com> Cc: dri-devel@lists.freedesktop.org Reviewed-by: Uma Shankar <uma.shankar@intel.com> Acked-by: Daniel Vetter <daniel@ffwll.ch> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/ab57627f373ec4a80494bb51ea51080810d9bfb0.1613054234.git.jani.nikula@intel.com
2021-01-19drm/dp: Revert "drm/dp: Introduce EDID-based quirks"Lyude Paul1-18/+3
This reverts commit 0883ce8146ed6074c76399f4e70dbed788582e12. Originally these quirks were added because of the issues with using the eDP backlight interfaces on certain laptop panels, which made it impossible to properly probe for DPCD backlight support without having a whitelist for panels that we know have working VESA backlight control interfaces over DPCD. As well, it should be noted it was impossible to use the normal sink OUI for recognizing these panels as none of them actually filled out their OUIs, hence needing to resort to checking EDIDs. At the time we weren't really sure why certain panels had issues with DPCD backlight controls, but we eventually figured out that there was a second interface that these problematic laptop panels actually did work with and advertise properly: Intel's proprietary backlight interface for HDR panels. So far the testing we've done hasn't brought any panels to light that advertise this interface and don't support it properly, which means we finally have a real solution to this problem. As a result, we now have no need for the force DPCD backlight quirk, and furthermore this also removes the need for any kind of EDID quirk checking in DRM. So, let's just revert it for now since we were the only driver using this. v3: * Rebase v2: * Fix indenting error picked up by checkpatch in intel_edp_init_connector() Signed-off-by: Lyude Paul <lyude@redhat.com> Acked-by: Jani Nikula <jani.nikula@intel.com> Cc: thaytan@noraisin.net Cc: Vasily Khoruzhick <anarsoul@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210114221709.2261452-6-lyude@redhat.com
2020-12-22drm/dp_helper: Add helpers to configure PCONs RGB-YCbCr ConversionAnkit Nautiyal1-1/+18
DP Specification for DP2.0 to HDMI2.1 Pcon specifies support for conversion of colorspace from RGB to YCbCr. https://groups.vesa.org/wg/DP/document/previewpdf/15651 This patch adds the relavant registers and helper functions to get the capability and set the color conversion bits for rgb->ycbcr conversion through PCON. v2: As suggested in review comments: -Fixed bug in the check condition in a drm_helper as reported by Dan Carpenter and Kernel test robot. (Dan Carepenter) -Modified the color-conversion cap helper function, to accommodate BT709 and BT2020 colorspace. (Uma Shankar) -Added spec details for the new cap for color conversion. (Uma Shankar) Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com> Reviewed-by: Uma Shankar <uma.shankar@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201218103723.30844-8-ankit.k.nautiyal@intel.com
2020-12-22drm/dp_helper: Add support for Configuring DSC for HDMI2.1 PconAnkit Nautiyal1-0/+114
This patch adds registers for getting DSC encoder capability for a HDMI2.1 PCon. It also addes helper functions to configure DSC between the PCON and HDMI2.1 sink. v2: Corrected offset for DSC encoder bpc and minor changes. Also added helper functions for getting pcon dsc encoder capabilities as suggested by Uma Shankar. v3: Only setting the DSC bits for the Protocol Converter control registers, avoiding overwritining color conversion bits. Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com> Reviewed-by: Uma Shankar <uma.shankar@intel.com> (v2) [Jani: Fixed checkpatch BLOCK_COMMENT_STYLE.] Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201218103723.30844-7-ankit.k.nautiyal@intel.com
2020-12-22drm/dp_helper: Add support for link failure detectionSwati Sharma1-0/+17
There are specific DPCDs defined for detecting link failures between the PCON and HDMI sink and check the link status. In case of link failure, PCON will communicate the same using an IRQ_HPD to source. HDMI sink would have indicated the same to PCON using SCDC interrupt mechanism. While source can always read final HDMI sink's status using I2C over AUX, it is easier and faster to read the PCONs already read HDMI sink status registers. This patch adds the DPCDs required for link failure detection and provide a helper function for printing error count/lane which might help in debugging the link failure issues. v2: Addressed comments from Uma Shankar: -rephrased the commit message, as per the code. -fixed styling issues -added documentation for the helper function. Signed-off-by: Swati Sharma <swati2.sharma@intel.com> Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com> Reviewed-by: Uma Shankar <uma.shankar@intel.com> [Jani: Fixed checkpatch PARENTHESIS_ALIGNMENT.] Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201218103723.30844-6-ankit.k.nautiyal@intel.com
2020-12-22drm/dp_helper: Add Helpers for FRL Link Training support for DP-HDMI2.1 PCONAnkit Nautiyal1-0/+70
This patch adds support for configuring a PCON device, connected as a DP branched device to enable FRL Link training with a HDMI2.1 + sink. v2: Fixed typos and addressed other review comments from Uma Shankar. -changed the commit message for better clarity (Uma Shankar) -removed unnecessary argument supplied to a drm helper function. -fixed return value for max frl read from pcon. v3: Removed DPCD 0x3035 for MAX Sink FRL b/w as per new version of spec. Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com> Reviewed-by: Uma Shankar <uma.shankar@intel.com> (v2) Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201218103723.30844-5-ankit.k.nautiyal@intel.com
2020-11-04Merge tag 'drm-intel-next-queued-2020-11-03' of ↵Dave Airlie1-0/+62
git://anongit.freedesktop.org/drm/drm-intel into drm-next drm/i915 features for v5.11 Highlights: - More DG1 enabling (Lucas, Matt, Aditya, Anshuman, Clinton, Matt, Stuart, Venkata) - Integer scaling filter support (Pankaj Bharadiya) - Asynchronous flip support (Karthik) Generic: - Fix gen12 forcewake tables (Matt) - Haswell PCI ID updates (Alexei Podtelezhnikov) Display: - ICL+ DSI command mode enabling (Vandita) - Shutdown displays grafecully on reboot/shutdown (Ville) - Don't register display debugfs when there is no display (Lucas) - Fix RKL CDCLK table (Matt) - Limit EHL/JSL eDP to HBR2 (José) - Handle incorrectly set (by BIOS) PLLs and DP link rates at probe (Imre) - Fix mode valid check wrt bpp for "YCbCr 4:2:0 only" modes (Ville) - State checker and dump fixes (Ville) - DP AUX backlight updates (Aaron Ma, Sean Paul) - Add DP LTTPR non-transparent link training mode (Imre) - PSR2 selective fetch enabling (José) - VBT updates (José) - HDCP updates (Ramalingam) Cleanups and refactoring: - HPD pin, AUX channel, and Type-C port identifier cleanup (Ville) - Hotplug and irq refactoring (Ville) - Better DDI encoder and AUX channel names (Ville) - Color LUT code cleanups (Ville) - Combo PHY code cleanups (Ville) - LSPCON code cleanups (Ville) - Documentation fixes (Mauro, Chris) Signed-off-by: Dave Airlie <airlied@redhat.com> From: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/87o8kehbaj.fsf@intel.com
2020-11-04Merge tag 'drm-misc-next-2020-10-27' of ↵Dave Airlie1-10/+62
git://anongit.freedesktop.org/drm/drm-misc into drm-next drm-misc-next for 5.11: UAPI Changes: - doc: rules for EBUSY on non-blocking commits; requirements for fourcc modifiers; on parsing EDID - fbdev/sbuslib: Remove unused FBIOSCURSOR32 - fourcc: deprecate DRM_FORMAT_MOD_NONE - virtio: Support blob resources for memory allocations; Expose host-visible and cross-device features Cross-subsystem Changes: - devicetree: Add vendor Prefix for Yes Optoelectronics, Shanghai Top Display Optoelectronics - dma-buf: Add struct dma_buf_map that stores DMA pointer and I/O-memory flag; dma_buf_vmap()/vunmap() return address in dma_buf_map; Use struct_size() macro Core Changes: - atomic: pass full state to CRTC atomic enable/disable; warn for EBUSY during non-blocking commits - dp: Prepare for DP 2.0 DPCD - dp_mst: Receive extended DPCD caps - dma-buf: Documentation - doc: Format modifiers; dma-buf-map; Cleanups - fbdev: Don't use compat_alloc_user_space(); mark as orphaned - fb-helper: Take lock in drm_fb_helper_restore_work_fb() - gem: Convert implementation and drivers to GEM object functions, remove GEM callbacks from struct drm_driver (expect gem_prime_mmap) - panel: Cleanups - pci: Add legacy infix to drm_irq_by_busid() - sched: Avoid infinite waits in drm_sched_entity_destroy() - switcheroo: Cleanups - ttm: Remove AGP support; Don't modify caching during swapout; Major refactoring of the implementation and API that affects all depending drivers; Add ttm_bo_wait_ctx(); Add ttm_bo_pin()/unpin() in favor of TTM_PL_FLAG_NO_EVICT; Remove ttm_bo_create(); Remove fault_reserve_notify() callback; Push move() implementation into drivers; Remove TTM_PAGE_FLAG_WRITE; Replace caching flags with init-time cache setting; Push ttm_tt_bind() into drivers; Replace move_notify() with delete_mem_notify(); No overlapping memcpy(); no more ttm_set_populated() - vram-helper: Fix BO top-down placement; TTM-related changes; Init GEM object functions with defaults; Default placement in system memory; Cleanups Driver Changes: - amdgpu: Use GEM object functions - armada: Use GEM object functions - aspeed: Configure output via sysfs; Init struct drm_driver with - ast: Reload LUT after FB format changes - bridge: Add driver and DT bindings for anx7625; Cleanups - bridge/dw-hdmi: Constify ops - bridge/ti-sn65dsi86: Add retries for link training - bridge/lvds-codec: Add support for regulator - bridge/tc358768: Restore connector support DRM_GEM_CMA_DRIVEROPS; Cleanups - display/ti,j721e-dss: Add DT properies assigned-clocks, assigned-clocks-parent and dma-coherent - display/ti,am65s-dss: Add DT properies assigned-clocks, assigned-clocks-parent and dma-coherent - etnaviv: Use GEM object functions - exynos: Use GEM object functions - fbdev: Cleanups and compiler fixes throughout framebuffer drivers - fbdev/cirrusfb: Avoid division by 0 - gma500: Use GEM object functions; Fix double-free of connector; Cleanups - hisilicon/hibmc: I2C-based DDC support; Use to_hibmc_drm_device(); Cleanups - i915: Use GEM object functions - imx/dcss: Init driver with DRM_GEM_CMA_DRIVER_OPS; Cleanups - ingenic: Reset pixel clock when parent clock changes; support reserved memory; Alloc F0 and F1 DMA channels at once; Support different pixel formats; Revert support for cached mmap buffers on F0/F1; support 30-bit/24-bit/8-bit-palette modes - komeda: Use DEFINE_SHOW_ATTRIBUTE - mcde: Detect platform_get_irq() errors - mediatek: Use GEM object functions - msm: Use GEM object functions - nouveau: Cleanups; TTM-related changes; Use GEM object functions - omapdrm: Use GEM object functions - panel: Add driver and DT bindings for Novatak nt36672a; Add driver and DT bindings for YTC700TLAG-05-201C; Add driver and DT bindings for TDO TL070WSH30; Cleanups - panel/mantix: Fix reset; Fix deref of NULL pointer in mantix_get_modes() - panel/otm8009a: Allow non-continuous dsi clock; Cleanups - panel/rm68200: Allow non-continuous dsi clock; Fix mode to 50 FPS - panfrost: Fix job timeout handling; Cleanups - pl111: Use GEM object functions - qxl: Cleanups; TTM-related changes; Pin new BOs with ttm_bo_init_reserved() - radeon: Cleanups; TTM-related changes; Use GEM object functions - rockchip: Use GEM object functions - shmobile: Cleanups - tegra: Use GEM object functions - tidss: Set drm_plane_helper_funcs.prepare_fb - tilcdc: Don't keep vblank interrupt enabled all the time - tve200: Detect platform_get_irq() errors - vc4: Use GEM object functions; Only register components once DSI is attached; Add Maxime as maintainer - vgem: Use GEM object functions - via: Simplify critical section in via_mem_alloc() - virtgpu: Use GEM object functions - virtio: Implement blob resources, host-visible and cross-device features; Support mapping of host-allocated resources; Use UUID APi; Cleanups - vkms: Use GEM object functions; Switch to SHMEM - vmwgfx: TTM-related changes; Inline ttm_bo_swapout_all() - xen: Use GEM object functions - xlnx: Use GEM object functions Signed-off-by: Dave Airlie <airlied@redhat.com> From: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/20201027100936.GA4858@linux-uq9g
2020-10-27drm: kernel-doc: drm_dp_helper.h: fix a typoMauro Carvalho Chehab1-1/+1
Right now, kernel-doc generates a warning: ./include/drm/drm_dp_helper.h:1786: warning: Function parameter or member 'hbr2_reset' not described in 'drm_dp_phy_test_params' This is due to a typo: @hb2_reset -> @hbr2_reset Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/2a615cb38e951215bb1bddc2481ad323c9cf3fc9.1603791716.git.mchehab+huawei@kernel.org
2020-10-12drm/dp: Add LTTPR helpersImre Deak1-0/+62
Add the helpers and register definitions needed to read out the common and per-PHY LTTPR capabilities and perform link training in the LTTPR non-transparent mode. v2: - Add drm_dp_dpcd_read_phy_link_status() and DP_PHY_LTTPR() here instead of adding these to i915. (Ville) v3: - Use memmove() to convert LTTPR to DPRX link status format. (Ville) Cc: dri-devel@lists.freedesktop.org Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Acked-by: Lyude Paul <lyude@redhat.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Imre Deak <imre.deak@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201007170917.1764556-5-imre.deak@intel.com
2020-09-29Merge tag 'drm-msm-next-2020-09-27' of ↵Dave Airlie1-0/+1
https://gitlab.freedesktop.org/drm/msm into drm-next * DSI support for sm8150/sm8250 * Support for per-process GPU pagetables (finally!) for a6xx. There are still some iommu/arm-smmu changes required to enable, without which it will fallback to the current single pgtable state. The first part (ie. what doesn't depend on drm side patches) is queued up for v5.10[1]. * DisplayPort support. Userspace DP compliance tool support is already merged in IGT[2] * The usual assortment of smaller fixes/cleanups Signed-off-by: Dave Airlie <airlied@redhat.com> From: Rob Clark <robdclark@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/CAF6AEGvqjuzH=Po_9EzzFsp2Xq3tqJUTKfsA2g09XY7_+6Ypfw@mail.gmail.com
2020-09-24drm/dp: add a number of DP 2.0 DPCD definitionsJani Nikula1-7/+45
Prepare for future with DP 2.0 DPCD definitions, with a couple of related drive-by cleanups. No functional changes. v2: Send the version that actually builds. Reviewed-by: Manasi Navare <manasi.d.navare@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200918114017.30198-2-jani.nikula@intel.com
2020-09-24drm/dp: add subheadings to DPCD address definitionsJani Nikula1-4/+18
Add the subheadings from the DP spec. No functional changes. Reviewed-by: Manasi Navare <manasi.d.navare@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200918114017.30198-1-jani.nikula@intel.com
2020-09-17drm/dp: Add helpers for DFP YCbCr 4:2:0 handlingVille Syrjälä1-0/+8
Add helpers to determine whether the DFP supports YCbCr 4:2:0 passthrough or YCbCr 4:4:4->4:2:0 conversion. v2: Add kdocs (Lyude) Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200904115354.25336-18-ville.syrjala@linux.intel.com Reviewed-by: Lyude Paul <lyude@redhat.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2020-09-17drm/dp: Add drm_dp_downstream_mode()Ville Syrjälä1-0/+12
The downstream facing port caps in the DPCD can give us a hint as to what kind of display mode the sink can use if it doesn't have an EDID. Use that information to pick a suitable mode. v2: Use Returns: for kdoc (Lyude) Add kdocs for drm_display_mode_from_cea_vic() (Lyude) Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200904115354.25336-14-ville.syrjala@linux.intel.com Reviewed-by: Lyude Paul <lyude@redhat.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2020-09-17drm/dp: Add drm_dp_downstream_{min,max}_tmds_clock()Ville Syrjälä1-0/+6
Add helpers to get the TMDS clock limits for HDMI/DVI downstream facing ports. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200904115354.25336-11-ville.syrjala@linux.intel.com Reviewed-by: Lyude Paul <lyude@redhat.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2020-09-17drm/dp: Redo drm_dp_downstream_max_clock() as drm_dp_downstream_max_dotclock()Ville Syrjälä1-2/+2
We want to differentiate between the DFP dotclock and TMDS clock limits. Let's convert the current thing to just give us the dotclock limit. v2: Use Returns: for kdoc (Lyude) Fix up nouveau code too Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200904115354.25336-9-ville.syrjala@linux.intel.com Reviewed-by: Lyude Paul <lyude@redhat.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2020-09-17drm/dp: Pimp drm_dp_downstream_max_bpc()Ville Syrjälä1-3/+7
Deal with more cases in drm_dp_downstream_max_bpc(): - DPCD 1.0 -> assume 8bpc for non-DP - DPCD 1.1+ DP (or DP++ with DP sink) -> allow anything - DPCD 1.1+ TMDS -> check the caps, assume 8bpc if the value is crap - anything else -> assume 8bpc v2: Use Returns: for kdoc (Lyude) Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200904115354.25336-8-ville.syrjala@linux.intel.com Reviewed-by: Lyude Paul <lyude@redhat.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2020-09-17drm/dp: Add helpers to identify downstream facing port typesVille Syrjälä1-0/+5
Add a few helpers to let us better identify which kind of DFP we're dealing with. v2: Use Returns: for kdoc (Lyude) Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200904115354.25336-7-ville.syrjala@linux.intel.com Reviewed-by: Lyude Paul <lyude@redhat.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2020-09-17drm/dp: Define more downstream facing port capsVille Syrjälä1-1/+7
Our definitions for the DPCD DFP capabilities are lacking. Add the missing bits. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200904115354.25336-5-ville.syrjala@linux.intel.com Reviewed-by: Lyude Paul <lyude@redhat.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2020-09-17drm/dp: Define protocol converter DPCD registersVille Syrjälä1-0/+10
DP 1.3 and 1.4 introduced some new registers for DP->HDMI protocol converters. Define those. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200904115354.25336-4-ville.syrjala@linux.intel.com Reviewed-by: Lyude Paul <lyude@redhat.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2020-09-15drm: add constant N value in helper fileChandan Uddaraju1-0/+1
The constant N value (0x8000) is used by i915 DP driver. Define this value in dp helper header file to use in multiple Display Port drivers. Change i915 driver accordingly. Change in v6: Change commit message Signed-off-by: Chandan Uddaraju <chandanu@codeaurora.org> Signed-off-by: Vara Reddy <varar@codeaurora.org> Signed-off-by: Tanmay Shah <tanmay@codeaurora.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Acked-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Rob Clark <robdclark@chromium.org>
2020-09-12Merge drm/drm-next into drm-intel-next-queuedRodrigo Vivi1-1/+22
Sync drm-intel-gt-next here so we can have an unified fixes flow. Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2020-09-01drm/mst: Add support for QUERY_STREAM_ENCRYPTION_STATUS MST sideband messageSean Paul1-0/+3
Used to query whether an MST stream is encrypted or not. Cc: Lyude Paul <lyude@redhat.com> Reviewed-by: Anshuman Gupta <anshuman.gupta@intel.com> Reviewed-by: Lyude Paul <lyude@redhat.com> Signed-off-by: Sean Paul <seanpaul@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20200218220242.107265-14-sean@poorly.run #v4 Link: https://patchwork.freedesktop.org/patch/msgid/20200305201236.152307-15-sean@poorly.run #v5 Link: https://patchwork.freedesktop.org/patch/msgid/20200429195502.39919-15-sean@poorly.run #v6 Link: https://patchwork.freedesktop.org/patch/msgid/20200623155907.22961-16-sean@poorly.run #v7 Link: https://patchwork.freedesktop.org/patch/msgid/20200818153910.27894-16-sean@poorly.run #v8 Changes in v4: -Added to the set Changes in v5: -None Changes in v6: -Use FIELD_PREP to generate request buffer bitfields (Lyude) -Add mst selftest and dump/decode_sideband_req for QSES (Lyude) Changes in v7: -None Changes in v8: -Reverse the parsing on the hdcp_*x_device_present bits and leave breadcrumb in case this is incorrect (Anshuman) Changes in v8.5: -s/DRM_DEBUG_KMS/drm_dbg_kms/ (Lyude) Signed-off-by: Ramalingam C <ramalingam.c@intel.com> Acked-by: Daniel Vetter <daniel@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20200819143133.46232-1-sean@poorly.run
2020-09-01drm/i915/dp: Extract drm_dp_read_dpcd_caps()Lyude Paul1-0/+3
Since DP 1.3, it's been possible for DP receivers to specify an additional set of DPCD capabilities, which can take precedence over the capabilities reported at DP_DPCD_REV. Basically any device supporting DP is going to need to read these in an identical manner, in particular nouveau, so let's go ahead and just move this code out of i915 into a shared DRM DP helper that we can use in other drivers. v2: * Remove redundant dpcd[DP_DPCD_REV] == 0 check * Fix drm_dp_dpcd_read() ret checks Signed-off-by: Lyude Paul <lyude@redhat.com> Reviewed-by: Sean Paul <sean@poorly.run> Link: https://patchwork.freedesktop.org/patch/msgid/20200826182456.322681-20-lyude@redhat.com
2020-09-01drm/i915/dp: Extract drm_dp_read_sink_count()Lyude Paul1-0/+1
And of course, we'll also need to read the sink count from other drivers as well if we're checking whether or not it's supported. So, let's extract the code for this into another helper. v2: * Fix drm_dp_dpcd_readb() ret check * Add back comment and move back sink_count assignment in intel_dp_get_dpcd() v5: * Change name from drm_dp_get_sink_count() to drm_dp_read_sink_count() * Also, add "See also:" section to kdocs Signed-off-by: Lyude Paul <lyude@redhat.com> Reviewed-by: Sean Paul <sean@poorly.run> Link: https://patchwork.freedesktop.org/patch/msgid/20200826182456.322681-17-lyude@redhat.com
2020-09-01drm/i915/dp: Extract drm_dp_read_sink_count_cap()Lyude Paul1-1/+7
Since other drivers are also going to need to be aware of the sink count in order to do proper dongle detection, we might as well steal i915's DP_SINK_COUNT helpers and move them into DRM helpers so that other dirvers can use them as well. Note that this also starts using intel_dp_has_sink_count() in intel_dp_detect_dpcd(), which is a functional change. v5: * Change name from drm_dp_has_sink_count() to drm_dp_read_sink_count_cap() Signed-off-by: Lyude Paul <lyude@redhat.com> Reviewed-by: Sean Paul <sean@poorly.run> Link: https://patchwork.freedesktop.org/patch/msgid/20200826182456.322681-16-lyude@redhat.com
generated by cgit v1.2.3 (git 2.39.0) at 2024-08-19 19:58:23 +0300