summaryrefslogtreecommitdiff
path: root/include/drm/drm_panel.h
AgeCommit message (Collapse)AuthorFilesLines
2021-07-13drm/dp: Move panel DP AUX backlight support to drm_dp_helperDouglas Anderson1-8/+0
We were getting a depmod error: depmod: ERROR: Cycle detected: drm_kms_helper -> drm -> drm_kms_helper It looks like the rule is that drm_kms_helper can call into drm, but drm can't call into drm_kms_helper. That means we've got to move the DP AUX backlight support into drm_dp_helper. NOTE: as part of this, I didn't try to do any renames of the main registration function. Even though it's in the drm_dp_helper, it still feels very parallel to drm_panel_of_backlight(). Fixes: 10f7b40e4f30 ("drm/panel: add basic DP AUX backlight support") Reported-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reported-by: Thomas Zimmermann <tzimmermann@suse.de> Signed-off-by: Douglas Anderson <dianders@chromium.org> Reviewed-by: Rajeev Nandan <rajeevny@codeaurora.org> Link: https://patchwork.freedesktop.org/patch/msgid/20210712075933.v2.1.I23eb4cc5a680341e7b3e791632a635566fa5806a@changeid
2021-07-09drm/panel: add basic DP AUX backlight supportRajeev Nandan1-4/+12
Some panels support backlight control over DP AUX channel using VESA's standard backlight control interface. Using new DRM eDP backlight helpers, add support to create and register a backlight for those panels in drm_panel to simplify the panel drivers. The panel driver with access to "struct drm_dp_aux" can create and register a backlight device using following code snippet in its probe() function: err = drm_panel_dp_aux_backlight(panel, aux); if (err) return err; Then drm_panel will handle backlight_(enable|disable) calls similar to the case when drm_panel_of_backlight() is used. Currently, we are not supporting one feature where the source device can combine the backlight brightness levels set through DP AUX and the BL_PWM_DIM eDP connector pin. Since it's not required for the basic backlight controls, it can be added later. Signed-off-by: Rajeev Nandan <rajeevny@codeaurora.org> Reviewed-by: Douglas Anderson <dianders@chromium.org> Reviewed-by: Lyude Paul <lyude@redhat.com> [dianders: added blank line for warning when applying] Signed-off-by: Douglas Anderson <dianders@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/1624726268-14869-2-git-send-email-rajeevny@codeaurora.org
2020-08-16drm/panel: Add helper for reading DT rotationDerek Basehore1-0/+10
This adds a helper function for reading the rotation (panel orientation) from the device tree. Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Tested-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Derek Basehore <dbasehore@chromium.org> Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20200813215609.28643-2-digetx@gmail.com
2020-08-08drm: Remove unnecessary drm_panel_attach and drm_panel_detachJoe Perches1-3/+0
These functions are now empty and no longer useful so remove the functions and their uses. Signed-off-by: Joe Perches <joe@perches.com> Cc: Bernard Zhao <bernard@vivo.com> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Maxime Ripard <mripard@kernel.org>, Cc: Thomas Zimmermann <tzimmermann@suse.de> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Icenowy Zheng <icenowy@aosc.io>, Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Robert Chiras <robert.chiras@nxp.com> Cc: dri-devel@lists.freedesktop.org, Cc: linux-kernel@vger.kernel.org Cc: opensource.kernel@vivo.com Signed-off-by: Sam Ravnborg <sam@ravnborg.org> # Fixed build and a few warnings Link: https://patchwork.freedesktop.org/patch/msgid/9e13761020750b1ce2f1fabee23ef6e2a2942882.camel@perches.com
2020-08-02drm/panel: remove return value of function drm_panel_addBernard Zhao1-1/+1
The function "int drm_panel_add(struct drm_panel *panel)" always returns 0, this return value is meaningless. Also, there is no need to check return value which calls "drm_panel_add and", error branch code will never run. Signed-off-by: Bernard Zhao <bernard@vivo.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20200801120216.8488-1-bernard@vivo.com
2020-01-12drm/drm_panel: fix export of drm_panel_of_backlight, try #3Arnd Bergmann1-1/+2
Making this IS_REACHABLE() was still wrong, as that just determines whether the lower-level backlight code would be reachable from the panel driver. However, with CONFIG_DRM=y and CONFIG_BACKLIGHT_CLASS_DEVICE=m, the drm_panel_of_backlight is left out of drm_panel.o but the condition tells the driver that it is there, leading to multiple link errors such as ERROR: "drm_panel_of_backlight" [drivers/gpu/drm/panel/panel-sitronix-st7701.ko] undefined! ERROR: "drm_panel_of_backlight" [drivers/gpu/drm/panel/panel-sharp-ls043t1le01.ko] undefined! ERROR: "drm_panel_of_backlight" [drivers/gpu/drm/panel/panel-seiko-43wvf1g.ko] undefined! ERROR: "drm_panel_of_backlight" [drivers/gpu/drm/panel/panel-ronbo-rb070d30.ko] undefined! ERROR: "drm_panel_of_backlight" [drivers/gpu/drm/panel/panel-rocktech-jh057n00900.ko] undefined! ERROR: "drm_panel_of_backlight" [drivers/gpu/drm/panel/panel-panasonic-vvx10f034n00.ko] undefined! ERROR: "drm_panel_of_backlight" [drivers/gpu/drm/panel/panel-osd-osd101t2587-53ts.ko] undefined! Change the condition to check for whether the function was actually part of the drm module. This version of the patch survived a few hundred randconfig builds, so I have a good feeling this might be the last one for the export. Fixes: 4a34a9dcec94 ("drm/drm_panel: Fix EXPORT of drm_panel_of_backlight() one more time") Fixes: 907aa265fde6 ("drm/drm_panel: fix EXPORT of drm_panel_of_backlight") Fixes: 152dbdeab1b2 ("drm/panel: add backlight support") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20200107203231.920256-1-arnd@arndb.de
2019-12-17drm/drm_panel: Fix EXPORT of drm_panel_of_backlight() one more timeAndy Shevchenko1-1/+1
The initial commit followed by the fix didn't take into consideration the case: CONFIG_DRM_PANEL=y CONFIG_BACKLIGHT_CLASS_DEVICE=m CONFIG_DRM_I915=y where symbol devm_of_find_backlight() is not reachable from DRM subsystem. Quick fix is to avoid drm_panel_of_backlight() from exporting in such case. Fixes: 907aa265fde6 ("drm/drm_panel: fix EXPORT of drm_panel_of_backlight") Reported-by: Randy Dunlap <rdunlap@infradead.org> Acked-by: Randy Dunlap <rdunlap@infradead.org> # build-tested Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Sean Paul <sean@poorly.run> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Maxime Ripard <mripard@kernel.org> Cc: dri-devel@lists.freedesktop.org Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20191217140721.42432-1-andriy.shevchenko@linux.intel.com
2019-12-10drm/panel: drop drm_device from drm_panelSam Ravnborg1-7/+0
The panel drivers used drm_panel.drm for two purposes: 1) Argument to drm_mode_duplicate() 2) drm->dev was used in error messages The first usage is replaced with drm_connector.dev - drm_connector is already connected to a drm_device and we have a valid connector The second usage is replaced with drm_panel.dev - this makes drivers more consistent in their dev argument used for dev_err() and friends With these replacements there are no more uses of drm_panel.drm, so it is removed from struct drm_panel. With this change drm_panel_attach() and drm_panel_detach() no longer have any use as they are empty functions. v2: - editorial correction in changelog (Laurent) Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Laurent Pinchart <Laurent.pinchart@ideasonboard.com> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Maxime Ripard <mripard@kernel.org> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Stefan Mavrodiev <stefan@olimex.com> Cc: Robert Chiras <robert.chiras@nxp.com> Cc: "Guido Günther" <agx@sigxcpu.org> Cc: Purism Kernel Team <kernel@puri.sm> Link: https://patchwork.freedesktop.org/patch/msgid/20191207140353.23967-8-sam@ravnborg.org
2019-12-10drm/panel: decouple connector from drm_panelSam Ravnborg1-8/+1
To facilitate moving connector creation to display drivers, decouple the drm_connector from drm_panel. This patch adds a connector argument to drm_panel_get_modes(). All users of drm_panel_get_modes() already had the connector available, so updating users was trivial. With this patch drm_panel no longer keeps a reference to the drm_connector. Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Jeffrey Hugo <jeffrey.l.hugo@gmail.com> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Laurent Pinchart <Laurent.pinchart@ideasonboard.com> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Andrzej Hajda <a.hajda@samsung.com> Cc: Neil Armstrong <narmstrong@baylibre.com> Cc: Jonas Karlman <jonas@kwiboo.se> Cc: Jernej Skrabec <jernej.skrabec@siol.net> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Maxime Ripard <mripard@kernel.org> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Inki Dae <inki.dae@samsung.com> Cc: Joonyoung Shim <jy0922.shim@samsung.com> Cc: Seung-Woo Kim <sw0312.kim@samsung.com> Cc: Kyungmin Park <kyungmin.park@samsung.com> Cc: Kukjin Kim <kgene@kernel.org> Cc: Krzysztof Kozlowski <krzk@kernel.org> Cc: Stefan Agner <stefan@agner.ch> Cc: Alison Wang <alison.wang@nxp.com> Cc: Philipp Zabel <p.zabel@pengutronix.de> Cc: Shawn Guo <shawnguo@kernel.org> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Pengutronix Kernel Team <kernel@pengutronix.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: NXP Linux Team <linux-imx@nxp.com> Cc: CK Hu <ck.hu@mediatek.com> Cc: Matthias Brugger <matthias.bgg@gmail.com> Cc: Marek Vasut <marex@denx.de> Cc: Tomi Valkeinen <tomi.valkeinen@ti.com> Cc: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Cc: Sandy Huang <hjc@rock-chips.com> Cc: "Heiko Stübner" <heiko@sntech.de> Cc: Benjamin Gaignard <benjamin.gaignard@linaro.org> Cc: Vincent Abriou <vincent.abriou@st.com> Cc: Chen-Yu Tsai <wens@csie.org> Cc: Jonathan Hunter <jonathanh@nvidia.com> Cc: Torsten Duwe <duwe@lst.de> Cc: Vasily Khoruzhick <anarsoul@gmail.com> Cc: Icenowy Zheng <icenowy@aosc.io> Cc: Sean Paul <seanpaul@chromium.org> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Boris Brezillon <boris.brezillon@collabora.com> Cc: Hariprasad Kelam <hariprasad.kelam@gmail.com> Cc: Alexios Zavras <alexios.zavras@intel.com> Cc: Brian Masney <masneyb@onstation.org> Cc: Rob Clark <robdclark@chromium.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Allison Randal <allison@lohutok.net> Cc: Shayenne Moura <shayenneluzmoura@gmail.com> Cc: Abhinav Kumar <abhinavk@codeaurora.org> Cc: linux-arm-kernel@lists.infradead.org Cc: linux-samsung-soc@vger.kernel.org Cc: linux-mediatek@lists.infradead.org Cc: linux-renesas-soc@vger.kernel.org Cc: linux-rockchip@lists.infradead.org Cc: linux-tegra@vger.kernel.org Link: https://patchwork.freedesktop.org/patch/msgid/20191207140353.23967-7-sam@ravnborg.org
2019-12-10drm/panel: add drm_connector argument to get_modes()Sam Ravnborg1-1/+2
Today the bridge creates the drm_connector, but that is planned to be moved to the display drivers. To facilitate this, update drm_panel_funcs.get_modes() to take drm_connector as an argument. All panel drivers implementing get_modes() are updated. v2: - drop accidental change (Laurent) - update docs for get_modes (Laurent) Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Maxime Ripard <mripard@kernel.org> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Stefan Mavrodiev <stefan@olimex.com> Cc: Robert Chiras <robert.chiras@nxp.com> Cc: "Guido Günther" <agx@sigxcpu.org> Cc: Purism Kernel Team <kernel@puri.sm> Link: https://patchwork.freedesktop.org/patch/msgid/20191207140353.23967-6-sam@ravnborg.org
2019-12-10drm/panel: add backlight supportSam Ravnborg1-0/+25
Panels often support backlight as specified in a device tree. Update the drm_panel infrastructure to support this to simplify the drivers. With this the panel driver just needs to add the following to the probe() function: err = drm_panel_of_backlight(panel); if (err) return err; Then drm_panel will handle all the rest. There is one caveat with the backlight support. If drm_panel_(enable|disable) are called multiple times in a row then backlight_(enable|disable) will be called multiple times. The above will happen when a panel drivers unconditionally calls drm_panel_disable() in their shutdown() function, whan the panel is already disabled and then shutdown() is called. Reading the backlight code it seems safe to call the backlight_(enable|disable) several times. v3: - Improve comments, fix grammar (Laurent) - Do not fail in drm_panel_of_backlight() if no DT support (Laurent) - Log if backlight_(enable|disable) fails (Laurent) - Improve drm_panel_of_backlight() docs - Updated changelog with backlight analysis (triggered by Laurent) v2: - Drop test of CONFIG_DRM_PANEL in header-file (Laurent) - do not enable backlight if ->enable() returns an error Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Maxime Ripard <maxime.ripard@bootlin.com> Cc: Sean Paul <sean@poorly.run> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20191207140353.23967-3-sam@ravnborg.org
2019-12-10drm/drm_panel: no error when no callbackSam Ravnborg1-2/+14
The callbacks in drm_panel_funcs are optional, so do not return an error just because no callback is assigned. v2: - Document what functions in drm_panel_funcs are optional (Laurent) - Return -EOPNOTSUPP if get_modes() is not assigned (Laurent) (Sam: -EOPNOTSUPP seems to best error code in this situation) Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Maxime Ripard <mripard@kernel.org> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20191207140353.23967-2-sam@ravnborg.org
2019-09-08drm/panel: Add and fill drm_panel type fieldLaurent Pinchart1-1/+11
Add a type field to the drm_panel structure to report the panel type, using DRM_MODE_CONNECTOR_* macros (the values that make sense are LVDS, eDP, DSI and DPI). This will be used to initialise the corresponding connector type. Update all panel drivers accordingly. The panel-simple driver only specifies the type for the known to be LVDS panels, while all other panels are left as unknown and will be converted on a case-by-case basis as they all need to be carefully reviewed. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20190904132804.29680-2-laurent.pinchart@ideasonboard.com
2019-08-24drm/panel: Initialise panel dev and funcs through drm_panel_init()Laurent Pinchart1-1/+2
Instead of requiring all drivers to set the dev and funcs fields of drm_panel manually after calling drm_panel_init(), pass the data as arguments to the function. This simplifies the panel drivers, and will help future refactoring when adding new arguments to drm_panel_init(). The panel drivers have been updated with the following Coccinelle semantic patch, with manual inspection to verify that no call to drm_panel_init() with a single argument still exists. @@ expression panel; expression device; identifier ops; @@ drm_panel_init(&panel + , device, &ops ); ... ( -panel.dev = device; -panel.funcs = &ops; | -panel.funcs = &ops; -panel.dev = device; ) Suggested-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20190823193245.23876-3-laurent.pinchart@ideasonboard.com
2019-08-10drm/panel: drop return code from drm_panel_detach()Sam Ravnborg1-1/+1
There are no errors that can be reported by this function, so drop the return code. Fix the only bridge driver that checked the return result. Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Emil Velikov <emil.velikov@collabora.com> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Maxime Ripard <maxime.ripard@bootlin.com> Cc: Sean Paul <sean@poorly.run> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Cc: Andrzej Hajda <a.hajda@samsung.com> Cc: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Linus Walleij <linus.walleij@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20190804201637.1240-14-sam@ravnborg.org
2019-08-10drm/panel: use inline comments in drm_panel.hSam Ravnborg1-16/+66
Inline comments provide better space for additional comments. Comments was slightly edited to follow the normal style, but no change to actual content. Used the opportuniy to change the order in drm_panel_funcs to follow the order they will be used by a panel. Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Emil Velikov <emil.velikov@collabora.com> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Maxime Ripard <maxime.ripard@bootlin.com> Cc: Sean Paul <sean@poorly.run> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20190804201637.1240-13-sam@ravnborg.org
2019-08-10drm/panel: move drm_panel functions to .c fileSam Ravnborg1-91/+8
Move inline functions from include/drm/drm_panel.h to drm_panel.c. This is in preparation for follow-up patches that will add extra logic to the functions. As they are no longer static inline, EXPORT them. v2: - align order of functions in drm_panel.h and drm_panel.c (Laurent) Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Emil Velikov <emil.velikov@collabora.com> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Maxime Ripard <maxime.ripard@bootlin.com> Cc: Sean Paul <sean@poorly.run> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20190804201637.1240-12-sam@ravnborg.org
2019-07-20drm/panel: make drm_panel.h self-containedJani Nikula1-0/+1
Fix build warning if drm_panel.h is built with CONFIG_OF=n or CONFIG_DRM_PANEL=n and included without the prerequisite err.h: ./include/drm/drm_panel.h: In function ‘of_drm_find_panel’: ./include/drm/drm_panel.h:203:9: error: implicit declaration of function ‘ERR_PTR’ [-Werror=implicit-function-declaration] return ERR_PTR(-ENODEV); ^~~~~~~ ./include/drm/drm_panel.h:203:9: error: returning ‘int’ from a function with return type ‘struct drm_panel *’ makes pointer from integer without a cast [-Werror=int-conversion] return ERR_PTR(-ENODEV); ^~~~~~~~~~~~~~~~ Fixes: 5fa8e4a22182 ("drm/panel: Make of_drm_find_panel() return an ERR_PTR() instead of NULL") Signed-off-by: Jani Nikula <jani.nikula@intel.com> Acked-by: Thierry Reding <treding@nvidia.com> Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Reviewed-by: Sean Paul <sean@poorly.run> Cc: Boris Brezillon <bbrezillon@kernel.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20190718161507.2047-2-sam@ravnborg.org
2018-10-04BackMerge v4.19-rc6 into drm-nextDave Airlie1-1/+0
I have some pulls based on rc6, and I prefer to have an explicit backmerge. Signed-off-by: Dave Airlie <airlied@redhat.com>
2018-09-27Revert "drm/panel: Add device_link from panel device to DRM device"Linus Walleij1-1/+0
This reverts commit 0c08754b59da5557532d946599854e6df28edc22. commit 0c08754b59da ("drm/panel: Add device_link from panel device to DRM device") creates a circular dependency under these circumstances: 1. The panel depends on dsi-host because it is MIPI-DSI child device. 2. dsi-host depends on the drm parent device (connector->dev->dev) this should be allowed. 3. drm parent dev (connector->dev->dev) depends on the panel after this patch. This makes the dependency circular and while it appears it does not affect any in-tree drivers (they do not seem to have dsi hosts depending on the same parent device) this does not seem right. As noted in a response from Andrzej Hajda, the intent is likely to make the panel dependent on the DRM device (connector->dev) not its parent. But we have no way of doing that since the DRM device doesn't contain any struct device on its own (arguably it should). Revert this until a proper approach is figured out. Cc: Jyri Sarha <jsarha@ti.com> Cc: Eric Anholt <eric@anholt.net> Cc: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Sean Paul <seanpaul@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20180927124130.9102-1-linus.walleij@linaro.org
2018-08-16drm: Add kerneldoc description for "link"-member in struct drm_panelJyri Sarha1-0/+1
Add kerneldoc description for "struct device_link *link"-member in struct drm_panel. Signed-off-by: Jyri Sarha <jsarha@ti.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Thierry Reding <treding@nvidia.com> Link: https://patchwork.freedesktop.org/patch/msgid/1534352611-19074-1-git-send-email-jsarha@ti.com
2018-07-10drm/panel: Make of_drm_find_panel() return an ERR_PTR() instead of NULLBoris Brezillon1-1/+1
Right now, the DRM panel logic returns NULL when a panel pointing to the passed OF node is not present in the list of registered panels. Most drivers interpret this NULL value as -EPROBE_DEFER, but we are about to modify the semantic of of_drm_find_panel() and let the framework return -ENODEV when the device node we're pointing to has a status property that is not equal to "okay" or "ok". Let's first patch the of_drm_find_panel() implementation to return ERR_PTR(-EPROBE_DEFER) instead of NULL and patch all callers to replace the '!panel' check by an 'IS_ERR(panel)' one. Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Signed-off-by: Thierry Reding <treding@nvidia.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180509130042.9435-2-boris.brezillon@bootlin.com
2018-05-18drm/panel: Add device_link from panel device to DRM deviceJyri Sarha1-0/+1
Add device_link from panel device (supplier) to DRM device (consumer) when drm_panel_attach() is called. This patch should protect the master DRM driver if an attached panel driver unbinds while it is in use. The device_link should make sure the DRM device is unbound before the panel driver becomes unavailable. The device_link is removed when drm_panel_detach() is called. The drm_panel_detach() should be called by the consumer DRM driver, not the panel driver, otherwise both drivers are racing to delete the same link. Signed-off-by: Jyri Sarha <jsarha@ti.com> Reviewed-by: Eric Anholt <eric@anholt.net> Signed-off-by: Thierry Reding <treding@nvidia.com> Link: https://patchwork.freedesktop.org/patch/msgid/b53584fd988d045c13de22d81825395b0ae0aad7.1524727888.git.jsarha@ti.com
2017-05-16drm: make drm_panel.h self-containedMasahiro Yamada1-0/+2
-ENOSYS and -EINVAL are referenced in some static inline functions. of_drm_find_pane() takes a pointer to struct device_node. Make this header self-contained to not depend on specific include order. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1493009447-31524-2-git-send-email-yamada.masahiro@socionext.com
2017-04-07drm: make of_drm_find_panel also depend on CONFIG_DRM_PANELRob Herring1-1/+1
For drm_of_find_panel_or_bridge() added in the next commit, an empty version of of_drm_find_panel is needed for !CONFIG_DRM_PANEL. Signed-off-by: Rob Herring <robh@kernel.org> Reviewed-by: Eric Anholt <eric@anholt.net> Signed-off-by: Sean Paul <seanpaul@chromium.org>
2017-01-04drm/panel: Constify device node argument to of_drm_find_panel()Laurent Pinchart1-2/+2
The argument is never modified by the function, make it const. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2016-05-06drm/panel: Flesh out kerneldocThierry Reding1-0/+59
Write more complete kerneldoc comments for the DRM panel API and integrate the helpers in the DRM DocBook reference. Signed-off-by: Thierry Reding <treding@nvidia.com>drm/panel: Add helper for simple panel connector Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/20160506140137.GA4641@ulmo.ba.sec
2015-04-02drm/panel: Add display timing supportPhilipp Zabel1-0/+5
Many panel data sheets, additionally to typical values, list allowed ranges for timings such as hsync/vsync lengths, porches, and the pixel clock rate. These can be stored in a struct display_timing, to be used by an encoder mode_fixup callback to clamp user provided timing values or to validate workarounds for clock source limitations. This patch adds a new drm_panel_funcs callback that returns the panel's available display_timing entries. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Thierry Reding <treding@nvidia.com>
2014-08-06drm/panel: Provide convenience wrapper for .get_modes()Ajay Kumar1-0/+8
Add a convenience wrapper for the struct drm_panel_funcs' .get_modes() function so that not every driver needs to check that the panel driver implements the function before calling it. Signed-off-by: Ajay Kumar <ajaykumar.rs@samsung.com> [treding: extract from larger patch, commit message] Signed-off-by: Thierry Reding <treding@nvidia.com>
2014-08-06drm/panel: add .prepare() and .unprepare() functionsAjay Kumar1-0/+50
Panels often require an initialization sequence that consists of three steps: a) powering up the panel, b) starting transmission of video data and c) enabling the panel (e.g. turn on backlight). This is usually necessary to avoid visual glitches at the beginning of video data transmission. Similarly, the shutdown sequence is typically done in three steps as well: a) disable the panel (e.g. turn off backlight), b) cease video data transmission and c) power down the panel. Currently drivers can only implement .enable() and .disable() functions, which is not enough to implement the above sequences. This commit adds a second pair of functions, .prepare() and .unprepare() to allow more fine-grained control over when the above steps are performed. Signed-off-by: Ajay Kumar <ajaykumar.rs@samsung.com> [treding: rewrite changelog, add kerneldoc] Signed-off-by: Thierry Reding <treding@nvidia.com>
2013-12-17drm: Add panel supportThierry Reding1-0/+82
Add a very simple framework to register and lookup panels. Panel drivers can initialize a DRM panel and register it with the framework, allowing them to be retrieved and used by display drivers. Currently only support for DPMS and obtaining panel modes is provided. However it should be sufficient to enable a large number of panels. The framework should also be easily extensible to support more sophisticated kinds of panels such as DSI. The framework hasn't been tied into the DRM core, even though it should be easily possible to do so if that's what we want. In the current implementation, display drivers can simple make use of it to retrieve a panel, obtain its modes and control its DPMS mode. Note that this is currently only tested on systems that boot from a device tree. No glue code has been written yet for systems that use platform data, but it should be easy to add. Signed-off-by: Thierry Reding <treding@nvidia.com>