summaryrefslogtreecommitdiff
path: root/include/dt-bindings/memory
AgeCommit message (Collapse)AuthorFilesLines
2021-02-01dt-bindings: mediatek: Add binding for mt8192 IOMMUYong Wu1-0/+243
This patch adds decriptions for mt8192 IOMMU and SMI. mt8192 also is MTK IOMMU gen2 which uses ARM Short-Descriptor translation table format. The M4U-SMI HW diagram is as below: EMI | M4U | ------------ SMI Common ------------ | +-------+------+------+----------------------+-------+ | | | | ...... | | | | | | | | larb0 larb1 larb2 larb4 ...... larb19 larb20 disp0 disp1 mdp vdec IPE IPE All the connections are HW fixed, SW can NOT adjust it. mt8192 M4U support 0~16GB iova range. we preassign different engines into different iova ranges: domain-id module iova-range larbs 0 disp 0 ~ 4G larb0/1 1 vcodec 4G ~ 8G larb4/5/7 2 cam/mdp 8G ~ 12G larb2/9/11/13/14/16/17/18/19/20 3 CCU0 0x4000_0000 ~ 0x43ff_ffff larb13: port 9/10 4 CCU1 0x4400_0000 ~ 0x47ff_ffff larb14: port 4/5 The iova range for CCU0/1(camera control unit) is HW requirement. Signed-off-by: Yong Wu <yong.wu@mediatek.com> Reviewed-by: Rob Herring <robh@kernel.org> Acked-by: Krzysztof Kozlowski <krzk@kernel.org> Reviewed-by: Tomasz Figa <tfiga@chromium.org> Link: https://lore.kernel.org/r/20210111111914.22211-6-yong.wu@mediatek.com Signed-off-by: Will Deacon <will@kernel.org>
2021-02-01dt-bindings: memory: mediatek: Rename header guard for SMI header fileYong Wu6-12/+12
Only rename the header guard for all the SoC larb port header file. No funtional change. Suggested-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Yong Wu <yong.wu@mediatek.com> Acked-by: Krzysztof Kozlowski <krzk@kernel.org> Acked-by: Rob Herring <robh@kernel.org> Reviewed-by: Tomasz Figa <tfiga@chromium.org> Link: https://lore.kernel.org/r/20210111111914.22211-5-yong.wu@mediatek.com Signed-off-by: Will Deacon <will@kernel.org>
2021-02-01dt-bindings: memory: mediatek: Extend LARB_NR_MAX to 32Yong Wu1-2/+2
Extend the max larb number definition as mt8192 has larb_nr over 16. Signed-off-by: Yong Wu <yong.wu@mediatek.com> Acked-by: Rob Herring <robh@kernel.org> Acked-by: Krzysztof Kozlowski <krzk@kernel.org> Reviewed-by: Tomasz Figa <tfiga@chromium.org> Link: https://lore.kernel.org/r/20210111111914.22211-4-yong.wu@mediatek.com Signed-off-by: Will Deacon <will@kernel.org>
2021-02-01dt-bindings: memory: mediatek: Add a common memory header fileYong Wu6-5/+20
Put all the macros about smi larb/port togethers. Signed-off-by: Yong Wu <yong.wu@mediatek.com> Acked-by: Rob Herring <robh@kernel.org> Acked-by: Krzysztof Kozlowski <krzk@kernel.org> Reviewed-by: Tomasz Figa <tfiga@chromium.org> Link: https://lore.kernel.org/r/20210111111914.22211-3-yong.wu@mediatek.com Signed-off-by: Will Deacon <will@kernel.org>
2020-12-17Merge tag 'arm-soc-drivers-5.11' of ↵Linus Torvalds1-0/+10
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM SoC driver updates from Arnd Bergmann: "There are a couple of subsystems maintained by other people that merge their drivers through the SoC tree, those changes include: - The SCMI firmware framework gains support for sensor notifications and for controlling voltage domains. - A large update for the Tegra memory controller driver, integrating it better with the interconnect framework - The memory controller subsystem gains support for Mediatek MT8192 - The reset controller framework gains support for sharing pulsed resets For Soc specific drivers in drivers/soc, the main changes are - The Allwinner/sunxi MBUS gets a rework for the way it handles dma_map_ops and offsets between physical and dma address spaces. - An errata fix plus some cleanups for Freescale Layerscape SoCs - A cleanup for renesas drivers regarding MMIO accesses. - New SoC specific drivers for Mediatek MT8192 and MT8183 power domains - New SoC specific drivers for Aspeed AST2600 LPC bus control and SoC identification. - Core Power Domain support for Qualcomm MSM8916, MSM8939, SDM660 and SDX55. - A rework of the TI AM33xx 'genpd' power domain support to use information from DT instead of platform data - Support for TI AM64x SoCs - Allow building some Amlogic drivers as modules instead of built-in Finally, there are numerous cleanups and smaller bug fixes for Mediatek, Tegra, Samsung, Qualcomm, TI OMAP, Amlogic, Rockchips, Renesas, and Xilinx SoCs" * tag 'arm-soc-drivers-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (222 commits) soc: mediatek: mmsys: Specify HAS_IOMEM dependency for MTK_MMSYS firmware: xilinx: Properly align function parameter firmware: xilinx: Add a blank line after function declaration firmware: xilinx: Remove additional newline firmware: xilinx: Fix kernel-doc warnings firmware: xlnx-zynqmp: fix compilation warning soc: xilinx: vcu: add missing register NUM_CORE soc: xilinx: vcu: use vcu-settings syscon registers dt-bindings: soc: xlnx: extract xlnx, vcu-settings to separate binding soc: xilinx: vcu: drop useless success message clk: samsung: mark PM functions as __maybe_unused soc: samsung: exynos-chipid: initialize later - with arch_initcall soc: samsung: exynos-chipid: order list of SoCs by name memory: jz4780_nemc: Fix potential NULL dereference in jz4780_nemc_probe() memory: ti-emif-sram: only build for ARMv7 memory: tegra30: Support interconnect framework memory: tegra20: Support hardware versioning and clean up OPP table initialization dt-bindings: memory: tegra20-emc: Document opp-supported-hw property soc: rockchip: io-domain: Fix error return code in rockchip_iodomain_probe() reset-controller: ti: force the write operation when assert or deassert ...
2020-11-26dt-bindings: memory: tegra124: Add memory client IDsDmitry Osipenko1-0/+68
Each memory client has unique hardware ID, add these IDs. Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Acked-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Thierry Reding <treding@nvidia.com>
2020-11-26dt-bindings: memory: tegra30: Add memory client IDsDmitry Osipenko1-0/+67
Each memory client has unique hardware ID, add these IDs. Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Acked-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Thierry Reding <treding@nvidia.com>
2020-11-26dt-bindings: memory: tegra20: Add memory client IDsDmitry Osipenko1-0/+53
Each memory client has unique hardware ID, add these IDs. Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Acked-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Thierry Reding <treding@nvidia.com>
2020-10-27dt-bindings: memory: tegra: Add missing swgroupsNicolin Chen1-0/+10
According to Tegra X1 TRM, there are missing swgroups in the tegra210_swgroups list. So this patch adds them in bindings. Note that the TEGRA_SWGROUP_GPU (in list) should be actually TEGRA_SWGROUP_GPUB (in TRM), yet TEGRA_SWGROUP_GPU (in TRM) is not being used -- only TEGRA_SWGROUP_GPUB (in TRM) is. So this patch does not add TEGRA_SWGROUP_GPU (in TRM) and keeps TEGRA_SWGROUP_GPU (in list) as it is. Signed-off-by: Nicolin Chen <nicoleotsuka@gmail.com> Acked-by: Thierry Reding <treding@nvidia.com> Link: https://lore.kernel.org/r/20201008003746.25659-5-nicoleotsuka@gmail.com Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
2020-09-18dt-bindings: iommu: Add binding for MediaTek MT8167 IOMMUFabien Parent1-0/+51
This commit adds IOMMU binding documentation and larb port definitions for the MT8167 SoC. Signed-off-by: Fabien Parent <fparent@baylibre.com> Acked-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20200907101649.1573134-1-fparent@baylibre.com Signed-off-by: Joerg Roedel <jroedel@suse.de>
2020-07-10dt-bindings: mediatek: Add bindings for MT6779Chao Hao1-0/+206
This patch adds description for MT6779 IOMMU. MT6779 has two iommus, they are mm_iommu and apu_iommu which both use ARM Short-Descriptor translation format. In addition, mm_iommu and apu_iommu are two independent HW instance , we need to set them separately. The MT6779 IOMMU hardware diagram is as below, it is only a brief diagram about iommu, it don't focus on the part of smi_larb, so I don't describe the smi_larb detailedly. EMI | -------------------------------------- | | MM_IOMMU APU_IOMMU | | SMI_COMMOM----------- APU_BUS | | | SMI_LARB(0~11) | | | | | | | -------------- | | | | | Multimedia engine CCU VPU MDLA EMDA All the connections are hardware fixed, software can not adjust it. Signed-off-by: Chao Hao <chao.hao@mediatek.com> Reviewed-by: Rob Herring <robh+dt@kernel.org> Link: https://lore.kernel.org/r/20200703044127.27438-2-chao.hao@mediatek.com Signed-off-by: Joerg Roedel <jroedel@suse.de>
2020-01-09dt-bindings: memory: Add Tegra194 memory controller headerThierry Reding1-0/+410
This header contains definitions for the memory controller found on NVIDIA Tegra194 SoCs, such as the stream IDs used for the ARM SMMU and the IDs used to identify the various memory clients. Signed-off-by: Thierry Reding <treding@nvidia.com> Acked-by: Rob Herring <robh@kernel.org>
2020-01-09dt-bindings: memory: Add Tegra186 memory client IDsThierry Reding1-0/+139
Add IDs for the memory clients found on NVIDIA Tegra186 SoCs. This will be used to describe interconnect paths from devices to system memory. Signed-off-by: Thierry Reding <treding@nvidia.com> Acked-by: Rob Herring <robh@kernel.org>
2019-08-30dt-bindings: mediatek: Add binding for mt8183 IOMMU and SMIYong Wu1-0/+130
This patch adds decriptions for mt8183 IOMMU and SMI. mt8183 has only one M4U like mt8173 and is also MTK IOMMU gen2 which uses ARM Short-Descriptor translation table format. The mt8183 M4U-SMI HW diagram is as below: EMI | M4U | ---------- | | gals0-rx gals1-rx | | | | gals0-tx gals1-tx | | ------------ SMI Common ------------ | +-----+-----+--------+-----+-----+-------+-------+ | | | | | | | | | | gals-rx gals-rx | gals-rx gals-rx gals-rx | | | | | | | | | | | | | | | | | | gals-tx gals-tx | gals-tx gals-tx gals-tx | | | | | | | | larb0 larb1 IPU0 IPU1 larb4 larb5 larb6 CCU disp vdec img cam venc img cam All the connections are HW fixed, SW can NOT adjust it. Compared with mt8173, we add a GALS(Global Async Local Sync) module between SMI-common and M4U, and additional GALS between larb2/3/5/6 and SMI-common. GALS can help synchronize for the modules in different clock frequency, it can be seen as a "asynchronous fifo". GALS can only help transfer the command/data while it doesn't have the configuring register, thus it has the special "smi" clock and it doesn't have the "apb" clock. From the diagram above, we add "gals0" and "gals1" clocks for smi-common and add a "gals" clock for smi-larb. >From the diagram above, IPU0/IPU1(Image Processor Unit) and CCU(Camera Control Unit) is connected with smi-common directly, we can take them as "larb2", "larb3" and "larb7", and their register spaces are different with the normal larb. Signed-off-by: Yong Wu <yong.wu@mediatek.com> Reviewed-by: Rob Herring <robh@kernel.org> Reviewed-by: Evan Green <evgreen@chromium.org> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2019-05-30treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 174Thomas Gleixner2-18/+2
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 655 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Richard Fontana <rfontana@redhat.com> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190527070034.575739538@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-18dt-bindings: mediatek: Add binding for mt2712 IOMMU and SMIYong Wu1-0/+95
This patch adds decriptions for mt2712 IOMMU and SMI. In order to balance the bandwidth, mt2712 has two M4Us, two smi-commons, 10 smi-larbs. and mt2712 is also MTK IOMMU gen2 which uses ARM Short-Descriptor translation table format. The mt2712 M4U-SMI HW diagram is as below: EMI | ------------------------------------ | | M4U0 M4U1 | | smi-common0 smi-common1 | | ------------------------- -------------------------------- | | | | | | | | | | | | | | | | | | | | larb0 larb1 larb2 larb3 larb6 larb4 larb5 larb7 larb8 larb9 disp0 vdec cam venc jpg mdp1/disp1 mdp2/disp2 mdp3 vdo/nr tvd All the connections are HW fixed, SW can NOT adjust it. Signed-off-by: Yong Wu <yong.wu@mediatek.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
2018-05-18dt-bindings: memory: tegra: Remove Tegra114 SATA and AFI reset definitionsDmitry Osipenko1-18/+16
Tegra114 doesn't have SATA nor PCIe, but TRM seems erroneously document them. Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2018-04-27dt-bindings: memory: tegra: Add hot resets definitionsDmitry Osipenko5-0/+115
Add definitions for the Tegra20+ memory controller hot resets. Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Thierry Reding <treding@nvidia.com>
2017-12-13dt-bindings: memory: Add Tegra186 supportThierry Reding1-0/+111
As opposed to earlier incarnations, the memory controller on Tegra186 no longer implements an SMMU. Instead the SMMU is a regular ARM SMMU and in a separate IP block. However, the memory controller programs the SMMU stream IDs for each of the memory clients. Add a header file with definitions for each of these stream IDs and mark the #iommu-cells property as required on Tegra30 to Tegra210 in the device tree bindings. Signed-off-by: Thierry Reding <treding@nvidia.com>
2017-11-02License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseGreg Kroah-Hartman4-0/+4
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-08-22iommu/mediatek: Move MTK_M4U_TO_LARB/PORT into mtk_iommu.cYong Wu1-4/+0
The definition of MTK_M4U_TO_LARB and MTK_M4U_TO_PORT are shared by all the gen2 M4U HWs. Thus, Move them out from mt8173-larb-port.h, and put them into the c file. Suggested-by: Honghui Zhang <honghui.zhang@mediatek.com> Signed-off-by: Yong Wu <yong.wu@mediatek.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2016-08-22iommu/mediatek: dt-binding: Correct the larb port offset defines for mt2701Honghui Zhang1-1/+1
larb2 have 23 ports, the LARB3_PORT_OFFSET should be LARB2_PORT_OFFSET plus larb2's port number, it should be 44 instead of 43. Signed-off-by: Honghui Zhang <honghui.zhang@mediatek.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2016-06-21dt-bindings: mediatek: add descriptions for mediatek mt2701 iommu and smiHonghui Zhang1-0/+85
This patch defines the local arbitor port IDs for mediatek SoC MT2701 and add descriptions of binding for mediatek generation one iommu and smi. Signed-off-by: Honghui Zhang <honghui.zhang@mediatek.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2016-02-25dt-bindings: mediatek: Add smi dts bindingYong Wu1-0/+111
This patch add smi binding document and smi local arbiter header file. Signed-off-by: Yong Wu <yong.wu@mediatek.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2015-08-13memory: tegra: Add Tegra210 supportThierry Reding1-0/+36
Add the table of memory clients and SWGROUPs for Tegra210 to enable SMMU support for this new SoC. Signed-off-by: Thierry Reding <treding@nvidia.com>
2014-12-04memory: Add NVIDIA Tegra memory controller supportThierry Reding3-0/+80
The memory controller on NVIDIA Tegra exposes various knobs that can be used to tune the behaviour of the clients attached to it. Currently this driver sets up the latency allowance registers to the HW defaults. Eventually an API should be exported by this driver (via a custom API or a generic subsystem) to allow clients to register latency requirements. This driver also registers an IOMMU (SMMU) that's implemented by the memory controller. It is supported on Tegra30, Tegra114 and Tegra124 currently. Tegra20 has a GART instead. The Tegra SMMU operates on memory clients and SWGROUPs. A memory client is a unidirectional, special-purpose DMA master. A SWGROUP represents a set of memory clients that form a logical functional unit corresponding to a single device. Typically a device has two clients: one client for read transactions and one client for write transactions, but there are also devices that have only read clients, but many of them (such as the display controllers). Because there is no 1:1 relationship between memory clients and devices the driver keeps a table of memory clients and the SWGROUPs that they belong to per SoC. Note that this is an exception and due to the fact that the SMMU is tightly integrated with the rest of the Tegra SoC. The use of these tables is discouraged in drivers for generic IOMMU devices such as the ARM SMMU because the same IOMMU could be used in any number of SoCs and keeping such tables for each SoC would not scale. Acked-by: Joerg Roedel <jroedel@suse.de> Signed-off-by: Thierry Reding <treding@nvidia.com>