Age | Commit message (Collapse) | Author | Files | Lines |
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull thermal control updates from Rafael Wysocki:
"The majority of changes here are related to the general switch-over to
using arrays of generic trip point structures registered along with a
thermal zone instead of trip point callbacks (this has been done
mostly by Daniel Lezcano with some help from yours truly on the Intel
drivers front).
Apart from that and the related reorganization of code, there are some
enhancements of the existing driver and a new Mediatek Low Voltage
Thermal Sensor (LVTS) driver. The Intel powerclamp undergoes a major
rework so it will use the generic idle_inject facility for CPU idle
time injection going forward and it will take additional module
parameters for specifying the subset of CPUs to be affected by it
(work done by Srinivas Pandruvada).
Also included are assorted fixes and a whole bunch of cleanups.
Specifics:
- Rework a large bunch of drivers to use the generic thermal trip
structure and use the opportunity to do more cleanups by removing
unused functions from the OF code (Daniel Lezcano)
- Remove core header inclusion from drivers (Daniel Lezcano)
- Fix some locking issues related to the generic thermal trip rework
(Johan Hovold)
- Fix a crash when requesting the critical temperature on tegra,
which is related to the generic trip point work (Jon Hunter)
- Clean up thermal device unregistration code (Viresh Kumar)
- Fix and clean up thermal control core initialization error code
paths (Daniel Lezcano)
- Relocate the trip points handling code into a separate file (Daniel
Lezcano)
- Make the thermal core fail registration of thermal zones and
cooling devices if the thermal class has not been registered
(Rafael Wysocki)
- Add trip point initialization helper functions for ACPI-defined
trip points and modify two thermal drivers to use them (Rafael
Wysocki, Daniel Lezcano)
- Make the core thermal control code use sysfs_emit_at() instead of
scnprintf() where applicable (ye xingchen)
- Consolidate code accessing the Intel TCC (Thermal Control
Circuitry) MSRs by introducing library functions for that and
making the TCC-related code in thermal drivers use them (Zhang Rui)
- Enhance the x86_pkg_temp_thermal driver to support dynamic tjmax
changes (Zhang Rui)
- Address an "unsigned expression compared with zero" warning in the
intel_soc_dts_iosf thermal driver (Yang Li)
- Update comments regarding two functions in the Intel Menlow thermal
driver (Deming Wang)
- Use sysfs_emit_at() instead of scnprintf() in the int340x thermal
driver (ye xingchen)
- Make the intel_pch thermal driver support the Wellsburg PCH (Tim
Zimmermann)
- Modify the intel_pch and processor_thermal_device_pci thermal
drivers use generic trip point tables instead of thermal zone trip
point callbacks (Daniel Lezcano)
- Add production mode attribute sysfs attribute to the int340x
thermal driver (Srinivas Pandruvada)
- Rework dynamic trip point updates handling and locking in the
int340x thermal driver (Rafael Wysocki)
- Make the int340x thermal driver use a generic trip points table
instead of thermal zone trip point callbacks (Rafael Wysocki,
Daniel Lezcano)
- Clean up and improve the int340x thermal driver (Rafael Wysocki)
- Simplify and clean up the intel_pch thermal driver (Rafael Wysocki)
- Fix the Intel powerclamp thermal driver and make it use the common
idle injection framework (Srinivas Pandruvada)
- Add two module parameters, cpumask and max_idle, to the Intel
powerclamp thermal driver to allow it to affect only a specific
subset of CPUs instead of all of them (Srinivas Pandruvada)
- Make the Intel quark_dts thermal driver Use generic trip point
objects instead of its own trip point representation (Daniel
Lezcano)
- Add toctree entry for thermal documents and fix two issues in the
Intel powerclamp driver documentation (Bagas Sanjaya)
- Use strscpy() to instead of strncpy() in the thermal core (Xu
Panda)
- Fix thermal_sampling_exit() (Vincent Guittot)
- Add Mediatek Low Voltage Thermal Sensor (LVTS) driver (Balsam
Chihi)
- Add r8a779g0 RCar support to the rcar_gen3 thermal driver (Geert
Uytterhoeven)
- Fix useless call to set_trips() when resuming in the rcar_gen3
thermal control driver and add interrupt support detection at init
time to it (Niklas Söderlund)
- Fix memory corruption in the hi3660 thermal driver (Yongqin Liu)
- Fix include path for libnl3 in pkg-config file for libthermal
(Vibhav Pant)
- Remove syscfg-based driver for st as the platform is not supported
any more (Alain Volmat)"
* tag 'thermal-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (135 commits)
thermal/drivers/st: Remove syscfg based driver
thermal: Remove core header inclusion from drivers
tools/lib/thermal: Fix include path for libnl3 in pkg-config file.
thermal/drivers/hisi: Drop second sensor hi3660
thermal/drivers/rcar_gen3_thermal: Fix device initialization
thermal/drivers/rcar_gen3_thermal: Create device local ops struct
thermal/drivers/rcar_gen3_thermal: Do not call set_trips() when resuming
thermal/drivers/rcar_gen3: Add support for R-Car V4H
dt-bindings: thermal: rcar-gen3-thermal: Add r8a779g0 support
thermal/drivers/mediatek: Add the Low Voltage Thermal Sensor driver
dt-bindings: thermal: mediatek: Add LVTS thermal controllers
thermal/drivers/mediatek: Relocate driver to mediatek folder
tools/lib/thermal: Fix thermal_sampling_exit()
Documentation: powerclamp: Fix numbered lists formatting
Documentation: powerclamp: Escape wildcard in cpumask description
Documentation: admin-guide: Add toctree entry for thermal docs
thermal: intel: powerclamp: Add two module parameters
Documentation: admin-guide: Move intel_powerclamp documentation
thermal: core: Use sysfs_emit_at() instead of scnprintf()
thermal: intel: powerclamp: Fix duration module parameter
...
|
|
Pull SoC DT updates from Arnd Bergmann:
"About a quarter of the changes are for 32-bit arm, mostly filling in
device support for existing machines and adding minor cleanups, mostly
for Qualcomm and Samsung based machines.
Two new 32-bit SoCs are added, both are quad-core Cortex-A7 chips from
Rockchips that have been around for a while but were lacking kernel
support so far: RV1126 is a Vision SoC with an NPU and is used in the
Edgeble Neural Compute Module 2(Neu2) board, while RK3128 is design
for TV boxes and so far only comes with a dts for its refernece
design.
The other 32-bit boards that were added are two ASpeed AST2600 based
BMC boards, the Microchip sam9x60_curiosity development board (Armv5
based!), the Enclustra PE1 FPGA-SoM baseboard, and a few more boards
for i.MX53 and i.MX6ULL.
On the RISC-V side, there are fewer patches, but a total of ten new
single-board computers based on variations of the Allwinner D1/T113
chip, plus one more board based on Microchip Polarfire.
As usual, arm64 has by far the most changes here, with over 700
non-merge changesets, among them over 400 alone for Qualcomm. The
newly added SoCs this time are all recent high-end embedded SoCs for
various markets, each on comes with support for its reference board:
- Qualcomm SM8550 (Snapdragon 8 Gen 2) for mobile phones
- Qualcomm QDU1000/QRU1000 5G RAN platform
- Rockchips RK3588/RK3588s for tablets, chromebooks and SBCs
- TI J784S4 for industrial and automotive applications
In total, there are 46 new arm64 machines:
- Reference platforms for each of the five new SoCs
- Three Amlogic based development boards
- Six embedded machines based on NXP i.MX8MM and i.MX8MP
- The Mediatek mt7986a based Banana Pi R3 router
- Six tablets based on Qualcomm MSM8916 (Snapdragon 410), SM6115
(Snapdragon 662) and SM8250 (Snapdragon 865)
- Two LTE dongles, also based on MSM8916
- Seven mobile phones, based on Qualcomm MSM8953 (Snapdragon 610),
SDM450 and SDM632
- Three chromebooks based on Qualcomm SC7280 (Snapdragon 7c)
- Nine development boards based on Rockchips RK3588, RK3568, RK3566
and RK3328.
- Five development machines based on TI K3 (AM642/AM654/AM68/AM69)
The cleanup of dtc warnings continues across all platforms, adding to
the total number of changes"
* tag 'soc-dt-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (1035 commits)
dt-bindings: riscv: correct starfive visionfive 2 compatibles
ARM: dts: socfpga: Add enclustra PE1 devicetree
dt-bindings: altera: Add enclustra mercury PE1
arm64: dts: qcom: msm8996: align RPM G-Link clock-controller node with bindings
arm64: dts: qcom: qcs404: align RPM G-Link node with bindings
arm64: dts: qcom: ipq6018: align RPM G-Link node with bindings
arm64: dts: qcom: sm8550: remove invalid interconnect property from cryptobam
arm64: dts: qcom: sc7280: Adjust zombie PWM frequency
arm64: dts: qcom: sc8280xp-pmics: Specify interrupt parent explicitly
arm64: dts: qcom: sm7225-fairphone-fp4: enable remaining i2c busses
arm64: dts: qcom: sm7225-fairphone-fp4: move status property down
arm64: dts: qcom: pmk8350: Use the correct PON compatible
arm64: dts: qcom: sc8280xp-x13s: Enable external display
arm64: dts: qcom: sc8280xp-crd: Introduce pmic_glink
arm64: dts: qcom: sc8280xp: Add USB-C-related DP blocks
arm64: dts: qcom: sm8350-hdk: enable GPU
arm64: dts: qcom: sm8350: add GPU, GMU, GPU CC and SMMU nodes
arm64: dts: qcom: sm8350: finish reordering nodes
arm64: dts: qcom: sm8350: move more nodes to correct place
arm64: dts: qcom: sm8350: reorder device nodes
...
|
|
Add LVTS thermal controllers dt-binding definition for mt8192 and mt8195.
Signed-off-by: Balsam CHIHI <bchihi@baylibre.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230209105628.50294-3-bchihi@baylibre.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/dt
More Qualcomm ARM64 DT updates for 6.3
The new Qualcomm QDU1000 and QRU1000 platforms, and the IDP device on
these are introduced. New support for a couple of USB modem sticks from
THWC are introduced, so is support for Xiaomi Mi Pad 5 Pro and the Pro
SKU of the Herobrine device.
The Core Bus Fabric (CBF) is introduced on MSM8996. Interconnect paths
for UFS are also described.
A few fixes related to the power-grid of herobrine, on SC7280, are
introduced.
QFPROM is introduced on IPQ8074 and Interconnect providers are added for
SDM670.
On SDM845 the duplicated wcd9340 audio coded description is moved from
devices to a common file, audio devices are added to the OnePlus 6 and
6T.
On SM6115 debug UART, SMP2P, watchdog nodes are introduced, and the
platform is switched to use #address/size-cells of 2, in line with most
other platforms.
Camera control interface and clock controllers are added for SM6350, and
the CCI interface is enabled on the Fairphone FP4.
On SM8350 the interconnect reference of SDHCI controller is corrected,
DSI1 PHY clocks are properly described as sources for the Display clock
controller and DSI1 is wired up to the display controller.
The firmware paths are corrected for the Sony Xperia Nagara platform.
The GPR bus, audio servic3es and LPASS pinctrl nodes are added for the
SM8550 platform. Additionally a few small typos/errors are corrected.
gpio-ranges are corrected across MSM8953, SM6115 and SC8280XP and a
range of DT validation issues are corrected.
* tag 'qcom-arm64-for-6.3-2' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (81 commits)
arm64: dts: qcom: sc7280: Power herobrine's 3.3 eDP/TS rail more properly
arm64: dts: qcom: pmk8550: fix PON compatible
arm64: dts: qcom: sm8550: fix DSI controller compatible
arm64: dts: qcom: sc7280: Hook up the touchscreen IO rail on evoker
arm64: dts: qcom: sc7280: Hook up the touchscreen IO rail on villager
arm64: dts: qcom: sc7280: Add 3ms ramp to herobrine's pp3300_left_in_mlb
arm64: dts: qcom: sc7280: On QCard, regulator L3C should be 1.8V
arm64: dts: qcom: sc8280xp: correct LPASS GPIO gpio-ranges
arm64: dts: qcom: msm8992-lg-bullhead: Enable regulators
arm64: dts: qcom: sm6115: correct TLMM gpio-ranges
arm64: dts: qcom: msm8953: correct TLMM gpio-ranges
arm64: dts: qcom: msm8992-lg-bullhead: Correct memory overlaps with the SMEM and MPSS memory regions
arm64: dts: qcom: sm8350-hdk: correct LT9611 pin function
arm64: dts: qcom: sm8350-hdk: align pin config node names with bindings
arm64: dts: qcom: sm6350: Use specific qmpphy compatible
arm64: dts: qcom: sm6115: Add smp2p nodes
arm64: dts: qcom: sm7225-fairphone-fp4: Enable CCI busses
arm64: dts: qcom: sm6350: Add CCI nodes
arm64: dts: qcom: sm6350: Add camera clock controller
dt-bindings: clock: add QCOM SM6350 camera clock bindings
...
Link: https://lore.kernel.org/r/20230210192908.2039976-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Merge DT binding to gain Camera clock defines for SM6350
|
|
Add device tree bindings for camera clock controller for
Qualcomm Technology Inc's SM6350 SoC.
Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221213152617.296426-1-konrad.dybcio@linaro.org
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/ti/linux into arm/dt
TI K3 device tree updates for v6.3
New features:
J784S4 SoC and EVM support
AM68 and AM69 StarterKit, phyBOARD-Electra-AM642, Siemens IoT2050 M.2
AM62A7 SK additional peripherals
AM62 SK USB support
Non critical fixes
AM62:
McSPI Clock ID fixes
MMC TAP value updates
J7200:
pinmux range update
All:
Cache DT node fixes
Cleanups:
Reorder dts Makefile entries alphabetically
* tag 'ti-k3-dt-for-v6.3' of https://git.kernel.org/pub/scm/linux/kernel/git/ti/linux: (25 commits)
arm64: dts: ti: Makefile: Rearrange entries alphabetically
arch: arm64: dts: Add support for AM69 Starter Kit
dt-bindings: arm: ti: Add binding for AM69 Starter Kit
arm64: dts: ti: iot2050: Add support for M.2 variant
dt-bindings: arm: ti: Add binding for Siemens IOT2050 M.2 variant
arm64: dts: ti: iot2050: Add layout of OSPI flash
arm64: dts: ti: k3-j7200: Fix wakeup pinmux range
arm64: dts: ti: k3-am68-sk: Add support for AM68 SK base board
arm64: dts: ti: Add initial support for AM68 SK System on Module
dt-bindings: arm: ti: Add binding for AM68 SK
arm64: dts: Update cache properties for ti
arm64: dts: ti: Add support for phyBOARD-Electra-AM642
dt-bindings: arm: ti: Add bindings for PHYTEC AM64x based hardware
arm64: dts: ti: k3-am62a7-sk: Enable USB1 node
arm64: dts: ti: k3-am62a7-sk: Enable ethernet port
arm64: dts: ti: k3-am62a-main: Add more peripheral nodes
arm64: dts: ti: k3-am62a-mcu: Add MCU domain peripherals
arm64: dts: ti: Add support for J784S4 EVM board
arm64: dts: ti: Add initial support for J784S4 SoC
dt-bindings: pinctrl: k3: Introduce pinmux definitions for J784s4
...
Link: https://lore.kernel.org/r/642cf238-43e5-d6fa-68b5-a9dfbc0277bf@ti.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
arm64-for-6.3
Merge DT binding in order to get GCC clock defines.
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/djakov/icc into HEAD
Merge DT binding to gain interconnect defines.
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux into arm/dt
Amlogic ARM64 DT changes for v6.3:
- Merge of immutable bindings branch with Reset & power domain binding
- New boards:
- Odroid-N2L (Smaller version of Odroid-N2+)
- BananaPi M2-Pro (Variant of BPI=M5 with on-board wifi)
- Radxa Zero2 (New version of Radza Zero with A311D SoC)
- Add DT node for the VIPNano-QI on the A311D
- DT bindings fixups covering all SoC families
- MAC address nodes
- ethernet PHY node name
- scpi & child node names
- SD/SDIO node name
- USB supply name
- invalid clock-names
- rng node name
- rtc node name
- ETH phy mux node name
- button & adc keys node name
- leds node names
- RK818 pmic properties
- remove CPU opps below 1GHz for G12A boards, like it was done for G12B/SM1
- Fix WiFi/Bt definition around P212 & Khadas VIM1
- Add audio node to P212
- Fix FAN trip definition to Odroid-HC4
- Fix gpio-fan gpios definition
- Permit Radxa Zero OTG on USB1
- Fix VDDIO_C enable gpio by using OPEN DRAIN flag
* tag 'amlogic-arm64-dt-for-v6.3' of https://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux: (43 commits)
arm64: dts: meson: add support for Radxa Zero2
dt-bindings: arm: amlogic: add support for Radxa Zero2
arm64: dts: meson: add support for BananaPi M2-Pro
dt-bindings: arm: amlogic: add support for BananaPi M2-Pro
arm64: dts: meson: bananapi-m5: convert dts to dtsi
arm64: dts: meson: bananapi-m5: remove redundant status from sound node
arm64: dts: meson: bananapi-m5: switch VDDIO_C pin to OPEN_DRAIN
arm64: dts: meson: radxa-zero: allow usb otg mode
arm64: dts: meson-gxm-khadas-vim2: use gpio-fan matrix instead of an array
arm64: dts: meson-g12b-odroid: Add initial support for Hardkernel ODROID-N2L
arm64: dts: meson-g12b: move common node into new odroid.dtsi
dt-bindings: arm: amlogic: document Odroid-N2L
arm64: dts: amlogic: meson-sm1-odroid-hc4: fix active fan thermal trip
arm64: dts: meson: add audio playback to S905X-P212 dts
arm64: dts: meson: remove WiFi/BT nodes from Khadas VIM1
arm64: dts: meson: move pwm_ef node in P212 dtsi
arm64: dts: meson: add Broadcom WiFi to P212 dtsi
arm64: dts: amlogic: meson-g12b-odroid-go-ultra: fix rk818 pmic properties
arm64: dts: amlogic: meson-gxbb-kii-pro: fix led node name
arm64: dts: amlogic: meson-gxl-s905d-phicomm-n1: fix led node name
...
Link: https://lore.kernel.org/r/c1641ffd-71c9-9ac9-89d9-c22da4acea10@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Add device tree bindings for global clock controller on QDU1000 and
QRU1000 SoCs.
Signed-off-by: Melody Olvera <quic_molvera@quicinc.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230112204446.30236-2-quic_molvera@quicinc.com
|
|
'20230103-topic-sm8550-upstream-dispcc-v3-1-8a03d348c572@linaro.org' into HEAD
Merge the DT binding in order to get the dispcc include file.
|
|
Document device tree bindings for display clock controller for
Qualcomm SM8550 SoC.
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230103-topic-sm8550-upstream-dispcc-v3-1-8a03d348c572@linaro.org
|
|
The platform was deprecated in commit 6a5e69c7ddea ("ARM: s3c: mark
as deprecated and schedule removal") and can be removed. This includes
all files that are exclusively for s3c24xx and not shared with s3c64xx,
as well as the glue logic in Kconfig and the maintainer file entries.
Cc: Arnaud Patard <arnaud.patard@rtp-net.org>
Cc: Ben Dooks <ben-linux@fluff.org>
Cc: Christer Weinigel <christer@weinigel.se>
Cc: Guillaume GOURAT <guillaume.gourat@nexvision.tv>
Cc: Heiko Stuebner <heiko@sntech.de>
Cc: Simtec Linux Team <linux@simtec.co.uk>
Cc: openmoko-kernel@lists.openmoko.org
Acked-by: Heiko Stuebner <heiko@sntech.de>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Add pinctrl macros for J784s4 SoC. These macro definitions are
similar to that of J721s2, but adding new definitions to avoid
any naming confusions in the soc dts files.
checkpatch insists the following error exists:
ERROR: Macros with complex values should be enclosed in parentheses
However, we do not need parentheses enclosing the values for this
macro as we do intend it to generate two separate values as has been
done for other similar platforms.
Signed-off-by: Hari Nagalla <hnagalla@ti.com>
Signed-off-by: Apurva Nandan <a-nandan@ti.com>
Acked-by: Rob Herring <robh@kernel.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Link: https://lore.kernel.org/r/20230112142725.77785-3-a-nandan@ti.com
|
|
Merge the TCSR clock binding, to gain the Devicetree include file.
|
|
Add bindings documentation for clock TCSR driver on SM8550.
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230104093450.3150578-2-abel.vesa@linaro.org
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/djakov/icc into arm64-for-6.3
Merge the immutable SM8550 interconnect branch, to gain the include file
from the binding.
|
|
Add separate schema for QDU1000 and QRU1000 interconnect devices
to document the different NoCs on these platforms.
Signed-off-by: Melody Olvera <quic_molvera@quicinc.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20221216230914.21771-2-quic_molvera@quicinc.com
Signed-off-by: Georgi Djakov <djakov@kernel.org>
|
|
Add define for the NNA power domain for the NPU in the G12A.
Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Acked-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Link: https://lore.kernel.org/r/20221202115223.39051-3-tomeu.vizoso@collabora.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
|
Doesn't appear in the TRM I have, but it is used by the downstream
galcore driver.
Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Acked-by: Neil Armstrong <neil.armstrong@linaro.org>
Acked-by: Philipp Zabel <p.zabel@pengutronix.de>
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Link: https://lore.kernel.org/r/20221202115223.39051-2-tomeu.vizoso@collabora.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
|
The Qualcomm SM8550 SoC has several bus fabrics that could be
controlled and tuned dynamically according to the bandwidth demand.
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20221202232054.2666830-2-abel.vesa@linaro.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
|
|
Add another power saving state used on SM8450. Unfortunately adding it
in proper place causes renumbering of all the opp states in sm8450.dtsi
Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221207012803.114959-2-dmitry.baryshkov@linaro.org
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux
Pull remoteproc updates from Bjorn Andersson:
"rproc-virtio device names are now auto generated, to avoid conflicts
between remoteproc instances.
The imx_rproc driver is extended with support for communicating with
and attaching to a running M4 on i.MX8QXP, as well as support for
attaching to the M4 after self-recovering from a crash. Support is
added for i.MX8QM and mailbox channels are reconnected during the
recovery process, in order to avoid data corruption.
The Xilinx Zynqmp firmware interface is extended and support for the
Xilinx R5 RPU is introduced.
Various resources leaks, primarily in error paths, throughout the
Qualcomm drivers are corrected.
Lastly a fix to ensure that pm_relax is invoked even if the remoteproc
instance is stopped between a crash is being reported and the recovery
handler is scheduled"
* tag 'rproc-v6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux: (25 commits)
remoteproc: core: Do pm_relax when in RPROC_OFFLINE state
remoteproc: qcom: q6v5: Fix missing clk_disable_unprepare() in q6v5_wcss_qcs404_power_on()
remoteproc: qcom_q6v5_pas: Fix missing of_node_put() in adsp_alloc_memory_region()
remoteproc: qcom_q6v5_pas: detach power domains on remove
remoteproc: qcom_q6v5_pas: disable wakeup on probe fail or remove
remoteproc: qcom: q6v5: Fix potential null-ptr-deref in q6v5_wcss_init_mmio()
remoteproc: sysmon: fix memory leak in qcom_add_sysmon_subdev()
remoteproc: sysmon: Make QMI message rules const
drivers: remoteproc: Add Xilinx r5 remoteproc driver
firmware: xilinx: Add RPU configuration APIs
firmware: xilinx: Add shutdown/wakeup APIs
firmware: xilinx: Add ZynqMP firmware ioctl enums for RPU configuration.
arm64: dts: xilinx: zynqmp: Add RPU subsystem device node
dt-bindings: remoteproc: Add Xilinx RPU subsystem bindings
remoteproc: core: Use device_match_of_node()
remoteproc: imx_rproc: Correct i.MX93 DRAM mapping
remoteproc: imx_rproc: Enable attach recovery for i.MX8QM/QXP
remoteproc: imx_rproc: Request mbox channel later
remoteproc: imx_rproc: Support i.MX8QM
remoteproc: imx_rproc: Support kicking Mcore from Linux for i.MX8QXP
...
|
|
git://git.linaro.org/landing-teams/working/fujitsu/integration
Pull mailbox updates from Jassi Brar:
- qcom: enable sc8280xp, sm8550 and sm4250 support
- ti: default to ARCH_K3 for msg manager
- mediatek:
- add mt8188 and mt8186 support
- request irq only after got ready
- zynq-ipi: fix error handling after device_register
- mpfs: check sys-con status
- rockchip: simplify by using device_get_match_data
* tag 'mailbox-v6.2' of git://git.linaro.org/landing-teams/working/fujitsu/integration:
dt-bindings: mailbox: qcom-ipcc: Add compatible for SM8550
mailbox: mtk-cmdq: Do not request irq until we are ready
mailbox: zynq-ipi: fix error handling while device_register() fails
mailbox: mtk-cmdq-mailbox: Use platform data directly instead of copying
mailbox: arm_mhuv2: Fix return value check in mhuv2_probe()
dt-bindings: mailbox: mediatek,gce-mailbox: add mt8188 compatible name
dt-bindings: mailbox: add GCE header file for mt8188
mailbox: mpfs: read the system controller's status
mailbox: mtk-cmdq: add MT8186 support
mailbox: mtk-cmdq: add gce ddr enable support flow
mailbox: mtk-cmdq: add gce software ddr enable private data
mailbox: mtk-cmdq: Use GCE_CTRL_BY_SW definition instead of number
mailbox: rockchip: Use device_get_match_data() to simplify the code
dt-bindings: mailbox: qcom-ipcc: Add sc8280xp compatible
mailbox: config: ti-msgmgr: Default set to ARCH_K3 for TI msg manager
mailbox: qcom-apcs-ipc: Add SM4250 APCS IPC support
dt-bindings: mailbox: qcom: Add SM4250 APCS compatible
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy
Pull phy updates from Vinod Koul:
"This tme we have again a big pile of qcom-qmp-* changes, one new
driver and bunch of new hardware support.
New hardware support:
- Allwinner H616 USB PHY and A100 DPHY support
- TI J721s2, J784s4 and J721e support
- Freescale i.MX8MP PCIe PHY support
- New driver for Renesas Ethernet SERDES supporting R-Car S4-8
- Qualcomm SM8450 PCIe1 PHY support in EP mode
- Qualcomm SC8280XP PCIe PHY support (including x4 mode)
- Fixed Qualcomm SC8280XP USB4-USB3-DP PHY DT bindings
Updates:
- A big pile of updates on qcom-qmp-* drivers following the driver
split and reorganization merged earlier
- Phy order of API calls documentation update"
* tag 'phy-for-6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy: (174 commits)
phy: ti: phy-j721e-wiz: add j721s2-wiz-10g module support
dt-bindings: phy-j721e-wiz: add j721s2 compatible string
phy: use devm_platform_get_and_ioremap_resource()
phy: allwinner: phy-sun6i-mipi-dphy: Add the A100 DPHY variant
phy: allwinner: phy-sun6i-mipi-dphy: Add a variant power-on hook
phy: allwinner: phy-sun6i-mipi-dphy: Set the enable bit last
phy: allwinner: phy-sun6i-mipi-dphy: Make RX support optional
dt-bindings: sun6i-a31-mipi-dphy: Add the A100 DPHY variant
dt-bindings: sun6i-a31-mipi-dphy: Add the interrupts property
phy: qcom-qmp-pcie: drop redundant clock allocation
phy: qcom-qmp-usb: drop redundant clock allocation
phy: qcom-qmp: drop unused type header
phy: qcom-qmp-usb: drop sc8280xp reference-clock source
dt-bindings: phy: qcom,sc8280xp-qmp-usb3-uni: drop reference-clock source
phy: qcom-qmp-combo: add support for updated sc8280xp binding
phy: qcom-qmp-combo: rename DP_PHY register pointer
phy: qcom-qmp-combo: rename common-register pointers
phy: qcom-qmp-combo: clean up DP clock callbacks
phy: qcom-qmp-combo: separate clock and provider registration
phy: qcom-qmp-combo: add clock registration helper
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu
Pull iommu updates from Joerg Roedel:
"Core code:
- map/unmap_pages() cleanup
- SVA and IOPF refactoring
- Clean up and document return codes from device/domain attachment
AMD driver:
- Rework and extend parsing code for ivrs_ioapic, ivrs_hpet and
ivrs_acpihid command line options
- Some smaller cleanups
Intel driver:
- Blocking domain support
- Cleanups
S390 driver:
- Fixes and improvements for attach and aperture handling
PAMU driver:
- Resource leak fix and cleanup
Rockchip driver:
- Page table permission bit fix
Mediatek driver:
- Improve safety from invalid dts input
- Smaller fixes and improvements
Exynos driver:
- Fix driver initialization sequence
Sun50i driver:
- Remove IOMMU_DOMAIN_IDENTITY as it has not been working forever
- Various other fixes"
* tag 'iommu-updates-v6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (74 commits)
iommu/mediatek: Fix forever loop in error handling
iommu/mediatek: Fix crash on isr after kexec()
iommu/sun50i: Remove IOMMU_DOMAIN_IDENTITY
iommu/amd: Fix typo in macro parameter name
iommu/mediatek: Remove unused "mapping" member from mtk_iommu_data
iommu/mediatek: Improve safety for mediatek,smi property in larb nodes
iommu/mediatek: Validate number of phandles associated with "mediatek,larbs"
iommu/mediatek: Add error path for loop of mm_dts_parse
iommu/mediatek: Use component_match_add
iommu/mediatek: Add platform_device_put for recovering the device refcnt
iommu/fsl_pamu: Fix resource leak in fsl_pamu_probe()
iommu/vt-d: Use real field for indication of first level
iommu/vt-d: Remove unnecessary domain_context_mapped()
iommu/vt-d: Rename domain_add_dev_info()
iommu/vt-d: Rename iommu_disable_dev_iotlb()
iommu/vt-d: Add blocking domain support
iommu/vt-d: Add device_block_translation() helper
iommu/vt-d: Allocate pasid table in device probe path
iommu/amd: Check return value of mmu_notifier_register()
iommu/amd: Fix pci device refcount leak in ppr_notifier()
...
|
|
Add Global Command Engine(GCE) header file to define the GCE thread priority,
GCE subsys id, event and constant for mt8188.
Signed-off-by: Elvis Wang <Elvis.Wang@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno<angelogioacchino.delregno@collabora.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
|
|
git://www.linux-watchdog.org/linux-watchdog
Pull watchdog updates from Wim Van Sebroeck:
- Add Advantech EC watchdog driver
- Add support for MT6795 Helio X10 watchdog and toprgu
- Add support for MT8188 watchdog device
- Remove #ifdef guards for PM related functions
- Other fixes and improvements
* tag 'linux-watchdog-6.2-rc1' of git://www.linux-watchdog.org/linux-watchdog:
watchdog: aspeed: Enable pre-timeout interrupt
watchdog: iTCO_wdt: Set NO_REBOOT if the watchdog is not already running
watchdog: rn5t618: add support for read out bootstatus
watchdog: kempld: Remove #ifdef guards for PM related functions
watchdog: omap: Remove #ifdef guards for PM related functions
watchdog: twl4030: Remove #ifdef guards for PM related functions
watchdog: at91rm9200: Remove #ifdef guards for PM related functions
watchdog: Add Advantech EC watchdog driver
dt-bindings: watchdog: mediatek,mtk-wdt: Add compatible for MT8173
dt-bindings: watchdog: mediatek,mtk-wdt: Add compatible for MT6795
dt-bindings: watchdog: mediatek: Convert mtk-wdt to json-schema
watchdog: mediatek: mt8188: add wdt support
dt-bindings: reset: mt8188: add toprgu reset-controller header file
dt-bindings: watchdog: Add compatible for MediaTek MT8188
watchdog: mtk_wdt: Add support for MT6795 Helio X10 watchdog and toprgu
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk driver updates from Stephen Boyd:
"A pile of clk driver updates with a small tracepoint patch to the clk
core this time around.
The core framework is effectively unchanged, with the majority of the
diff going to the Qualcomm clk driver directory because they added two
3k line files that are almost all clk data (Abel Vesa from Linaro
tried to shrink the number of lines down, but it doesn't seem to be
possible without sacrificing readability).
The second big driver this time around is the Rockchip rk3588 clk and
reset unit, at _only_ 2.5k lines.
Ignoring the big clk drivers from the familiar SoC vendors, there's
just a bunch of little clk driver updates and fixes throughout here.
It's the usual set of clk data fixups to describe proper parents, or
add frequencies to frequency tables, or plug memory leaks when
function calls fail. Also, some drivers are converted to use modern
clk_hw APIs, which is always nice to see. And data is deduplicated,
leading to a smaller kernel Image.
Overall this batch has a larger collection of cleanups than it
typically does. Maybe that means there are less new SoCs right now
that need supporting, and the focus has shifted to quality and
reliability. I can dream.
New Drivers:
- Frequency hopping controller hardware on MediaTek MT8186
- Global clock controller for Qualcomm SM8550
- Display clock controller for Qualcomm SC8280XP
- RPMh clock controller for Qualcomm QDU1000 and QRU1000 SoCs
- CPU PLL on MStar/SigmaStar SoCs
- Support for the clock and reset unit of the Rockchip rk3588
Updates:
- Tracepoints for clk_rate_request structures
- Debugfs support for fractional divider clk
- Make MxL's CGU driver secure compatible
- Ingenic JZ4755 SoC clk support
- Support audio clks on X1000 SoCs
- Remove flags from univ/main/syspll child fixed factor clocks across
MediaTek platforms
- Fix clock dependency for ADC on MediaTek MT7986
- Fix parent for FlexSPI clock for i.MX93
- Add USB suspend clock on i.MX8MP
- Unmap anatop base on error for i.MX93 driver
- Change enet clock parent to wakeup_axi_root for i.MX93
- Drop LPIT1, LPIT2, TPM1 and TPM3 clocks for i.MX93
- Mark HSIO bus clock and SYS_CNT clock as critical on i.MX93
- Add 320MHz and 640MHz entries to PLL146x
- Add audio shared gate and SAI clocks for i.MX8MP
- Fix a possible memory leak in the error path of rockchip PLL
creation
- Fix header guard for V3S clocks
- Add IR module clock for f1c100s
- Correct the parent clocks for the (High Speed) Serial Communication
Interfaces with FIFO ((H)SCIF) modules and the mixed-up Ethernet
Switch clocks on Renesas R-Car S4-8
- Add timer (TMU, CMT) and Cortex-A76 CPU core (Z0) clocks on Renesas
R-Car V4H
- Two PLL driver fixups for the Amlogic clk driver
- Round SD clock rate to improve parent clock selection
- Add Ethernet Switch and internal SASYNCPER clocks on Renesas R-Car
S4-8
- Add DMA (SYS-DMAC), SPI (MSIOF), external interrupt (INTC-EX)
serial (SCIF), PWM (PWM and TPU), SDHI, and HyperFLASH/QSPI
(RPC-IF) clocks on Renesas R-Car V4H
- Add Multi-Function Timer Pulse Unit (MTU3a) clock and reset on
Renesas RZ/G2L
- Fix endless loop on Renesas RZ/N1
- Correct the parent clocks for the High Speed Serial Communication
Interfaces with FIFO (HSCIF) modules on the Renesas R-Car V4H SoC
Note: HSCIF0 is used for the serial console on the White-Hawk
development board
- Various clk DT binding improvements and conversions to YAML
- Qualcomm SM8150/SM8250 display clock controller cleaned up
- Some missing clocks for Qualcomm SM8350 added
- Qualcomm MSM8974 Global and Multimedia clock controllers
transitioned to parent_data and parent_hws
- Use parent_data and add network resets for Qualcomm IPQ8074
- Qualcomm Krait clock controller modernized
- Fix pm_runtime usage in Qualcomm SC7180 and SC7280 LPASS clock
controllers
- Enable retention mode on Qualcomm SM8250 USB GDSCs
- Cleanup Qualcomm RPM and RPMh clock drivers to avoid duplicating
clocks which definition could be shared between platforms
- Various NULL pointer checks added for allocations"
* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (188 commits)
clk: nomadik: correct struct name kernel-doc warning
clk: lmk04832: fix kernel-doc warnings
clk: lmk04832: drop superfluous #include
clk: lmk04832: drop unnecessary semicolons
clk: lmk04832: declare variables as const when possible
clk: socfpga: Fix memory leak in socfpga_gate_init()
clk: microchip: enable the MPFS clk driver by default if SOC_MICROCHIP_POLARFIRE
clk: st: Fix memory leak in st_of_quadfs_setup()
clk: samsung: Fix memory leak in _samsung_clk_register_pll()
clk: Add trace events for rate requests
clk: Store clk_core for clk_rate_request
clk: qcom: rpmh: add support for SM6350 rpmh IPA clock
clk: qcom: mmcc-msm8974: use parent_hws/_data instead of parent_names
clk: qcom: mmcc-msm8974: move clock parent tables down
clk: qcom: mmcc-msm8974: use ARRAY_SIZE instead of specifying num_parents
clk: qcom: gcc-msm8974: use parent_hws/_data instead of parent_names
clk: qcom: gcc-msm8974: move clock parent tables down
clk: qcom: gcc-msm8974: use ARRAY_SIZE instead of specifying num_parents
dt-bindings: clocks: qcom,mmcc: define clocks/clock-names for MSM8974
dt-bindings: clock: split qcom,gcc-msm8974,-msm8226 to the separate file
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
Pull pin control updates from Linus Walleij:
"The two large chunks is the header clean-up from Andy and the Qualcomm
DT bindings clean-up from Krzysztof. Each which could give rise to
conflicts, but I haven't seen any.
The YAML conversions happening around the device tree is the biggest
item in the series and is the result of Rob Herrings ambition to
autovalidate these trees against strict schemas and it is paying off
in lots of bugs found and ever prettier device trees. Sooner or later
the transition will be complete, Krzysztof is fixing up all of the
Qualcomm stuff, which is pretty voluminous.
Core changes:
- minor but nice and important documentation clean-ups
New drivers:
- subdriver for the Qualcomm SDM670 SoC
- subdriver for the Intel Moorefield SoC
- trivial support for the NXP Freescale i.MXRT1170 SoC
Other changes and improvements
- major clean-up of the Qualcomm pin control device tree bindings by
Krzysztof
- major header clean-up by Andy
- some immutable irqchip clean-up for the Actions Semiconductor and
Nuvoton drivers
- GPIO helpers for The Cypress cy8c95x0 driver
- bias handling in the Mediatek MT7986 driver
- remove the unused pins-are-numbered concept that never flew"
* tag 'pinctrl-v6.2-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (231 commits)
pinctrl: thunderbay: fix possible memory leak in thunderbay_build_functions()
dt-bindings: pinctrl: st,stm32: Deprecate pins-are-numbered
dt-bindings: pinctrl: mediatek,mt65xx: Deprecate pins-are-numbered
pinctrl: stm32: Remove check for pins-are-numbered
pinctrl: mediatek: common: Remove check for pins-are-numbered
pinctrl: qcom: remove duplicate included header files
pinctrl: sunxi: d1: Add CAN bus pinmuxes
pinctrl: loongson2: Fix some const correctness
pinctrl: pinconf-generic: add missing of_node_put()
pinctrl: intel: Enumerate PWM device when community has a capability
pwm: lpss: Rename pwm_lpss_probe() --> devm_pwm_lpss_probe()
pwm: lpss: Allow other drivers to enable PWM LPSS
pwm: lpss: Include headers we are the direct user of
pwm: lpss: Rename MAX_PWMS --> LPSS_MAX_PWMS
pwm: Add a stub for devm_pwmchip_add()
pinctrl: k210: call of_node_put()
pinctrl: starfive: Use existing variable gpio
dt-bindings: pinctrl: semtech,sx150xq: fix match patterns for 16 GPIOs matching
pinconf-generic: fix style issues in pin_config_param doc
pinctrl: pinctrl-loongson2: fix Kconfig dependency
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media updates from Mauro Carvalho Chehab:
- DVB core changes to avoid refcount troubles and UAF
- DVB API/core has gained support for DVB-C2 and DVB-S2X
- New sensor drivers: ov08x40, ov4689.c, st-vgxy61 and tc358746.c
- Removal of an unused sensor driver: s5k4ecgx
- Move microchip_csi2dc to a new directory, named after the
manufacturer
- Add media controller support to Microship drivers
- Old Atmel/Microship drivers that don't use media controler got moved
to staging
- New drivers added for Renesas RZ/G2L CRU and MIPI CSI-2 support
- Allwinner A31 camera sensor driver code was now split into a bridge
and a separate processor driver
- Added a virtual stateless decoder driver in order to test core
support for stateless drivers and test userspace apps using it
- removed platform-based support for ov9650, as this is not used
anymore
- atomisp now uses videobuf2 and supports normal mmap mode
- the imx7-media-csi driver got promoted from staging
- rcar-vin driver has gained support for gen3 UDS (Up Down Scaler)
- most i2c drivers now use I2C .probe_new() kAPI
- lots of drivers fixes, cleanups and improvements
* tag 'media/v6.2-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (544 commits)
media: s5c73m3: Switch to GPIO descriptors
media: i2c: s5k5baf: switch to using gpiod API
media: i2c: s5k6a3: switch to using gpiod API
media: imx: remove code for non-existing config IMX_GPT_ICAP
media: si470x: Fix use-after-free in si470x_int_in_callback()
media: staging: stkwebcam: Restore MEDIA_{USB,CAMERA}_SUPPORT dependencies
media: coda: Add check for kmalloc
media: coda: Add check for dcoda_iram_alloc
dt-bindings: media: s5c73m3: Fix reset-gpio descriptor
media: dt-bindings: allwinner: h6-vpu-g2: Add IOMMU reference property
media: s5k4ecgx: Delete driver
media: s5k4ecgx: Switch to GPIO descriptors
media: Switch to use dev_err_probe() helper
headers: Remove some left-over license text in include/uapi/linux/v4l2-*
headers: Remove some left-over license text in include/uapi/linux/dvb/
media: usb: pwc-uncompress: Use flex array destination for memcpy()
media: s5p-mfc: Fix to handle reference queue during finishing
media: s5p-mfc: Clear workbit to handle error condition
media: s5p-mfc: Fix in register read and write for H264
media: imx: Use get_mbus_config instead of parsing upstream DT endpoints
...
|
|
into clk-next
- Tracepoints for clk_rate_request structures
* clk-mediatek:
clk: mediatek: fix dependency of MT7986 ADC clocks
clk: mediatek: Change PLL register API for MT8186
clk: mediatek: Add new clock driver to handle FHCTL hardware
dt-bindings: clock: mediatek: Add new bindings of MediaTek frequency hopping
clk: mediatek: Export PLL operations symbols
clk: mediatek: mt8186-topckgen: Add GPU clock mux notifier
clk: mediatek: mt8186-mfg: Propagate rate changes to parent
clk: mediatek: mt8195-topckgen: Drop flags for main/univpll fixed factors
clk: mediatek: mt8192: Drop flags for main/univpll fixed factors
clk: mediatek: mt6795-topckgen: Drop flags for main/sys/univpll fixed factors
clk: mediatek: mt8173: Drop flags for main/sys/univpll fixed factors
clk: mediatek: mt8183: Drop flags for sys/univpll fixed factors
clk: mediatek: mt8183: Compress top_divs array entries
clk: mediatek: mt8186-topckgen: Drop flags for main/univpll fixed factors
clk: mediatek: clk-mtk: Allow specifying flags on mtk_fixed_factor clocks
* clk-trace:
clk: Add trace events for rate requests
clk: Store clk_core for clk_rate_request
* clk-qcom: (69 commits)
clk: qcom: rpmh: add support for SM6350 rpmh IPA clock
clk: qcom: mmcc-msm8974: use parent_hws/_data instead of parent_names
clk: qcom: mmcc-msm8974: move clock parent tables down
clk: qcom: mmcc-msm8974: use ARRAY_SIZE instead of specifying num_parents
clk: qcom: gcc-msm8974: use parent_hws/_data instead of parent_names
clk: qcom: gcc-msm8974: move clock parent tables down
clk: qcom: gcc-msm8974: use ARRAY_SIZE instead of specifying num_parents
dt-bindings: clocks: qcom,mmcc: define clocks/clock-names for MSM8974
dt-bindings: clock: split qcom,gcc-msm8974,-msm8226 to the separate file
clk: qcom: gcc-ipq4019: switch to devm_clk_notifier_register
clk: qcom: rpmh: remove usage of platform name
clk: qcom: rpmh: rename VRM clock data
clk: qcom: rpmh: rename ARC clock data
clk: qcom: rpmh: support separate symbol name for the RPMH clocks
clk: qcom: rpmh: remove platform names from BCM clocks
clk: qcom: rpmh: drop all _ao names
clk: qcom: rpmh: reuse common duplicate clocks
clk: qcom: rpmh: group clock definitions together
clk: qcom: rpm: drop the platform from clock definitions
clk: qcom: rpm: drop the _clk suffix completely
...
* clk-microchip:
clk: microchip: enable the MPFS clk driver by default if SOC_MICROCHIP_POLARFIRE
clk: microchip: check for null return of devm_kzalloc()
|
|
clk-next
- Debugfs support for fractional divider clk
* clk-spear:
clk: spear: Fix SSP clock definition on SPEAr600
clk: spear: Fix CLCD clock definition on SPEAr600
* clk-fract:
clk: fractional-divider: Regroup inclusions
clk: fractional-divider: Show numerator and denominator in debugfs
clk: fractional-divider: Split out clk_fd_get_div() helper
* clk-rockchip:
clk: rockchip: Fix memory leak in rockchip_clk_register_pll()
clk: rockchip: add clock controller for the RK3588
clk: rockchip: add lookup table support
clk: rockchip: simplify rockchip_clk_add_lookup
clk: rockchip: allow additional mux options for cpu-clock frequency changes
clk: rockchip: add pll type for RK3588
clk: rockchip: add register offset of the cores select parent
dt-bindings: clock: add rk3588 cru bindings
dt-bindings: reset: add rk3588 reset definitions
dt-bindings: clock: add rk3588 clock definitions
clk: rockchip: use proper crypto0 name on rk3399
* clk-imx:
clk: imx: rename imx_obtain_fixed_clk_hw() to imx_get_clk_hw_by_name()
clk: imx8mn: fix imx8mn_enet_phy_sels clocks list
clk: imx8mn: fix imx8mn_sai2_sels clocks list
clk: imx: rename video_pll1 to video_pll
clk: imx: replace osc_hdmi with dummy
clk: imx8mn: rename vpu_pll to m7_alt_pll
clk: imx: imxrt1050: add IMXRT1050_CLK_LCDIF_PIX clock gate
clk: imx: imxrt1050: fix IMXRT1050_CLK_LCDIF_APB offsets
clk: imx8mp: Add audio shared gate
dt-bindings: clock: imx8mp: Add ids for the audio shared gate
clk: imx: pll14xx: Add 320 MHz and 640 MHz entries for PLL146x
clk: imx93: keep sys ctr clock always on
clk: imx: keep hsio bus clock always on
clk: imx93: drop tpm1/3, lpit1/2 clk
dt-bindings: clock: imx93: drop TPM1/3 LPIT1/2 entry
clk: imx93: correct enet clock
clk: imx93: unmap anatop base in error handling path
clk: imx: imx8mp: add shared clk gate for usb suspend clk
dt-bindings: clocks: imx8mp: Add ID for usb suspend clock
clk: imx93: correct the flexspi1 clock setting
|
|
and 'clk-ti' into clk-next
* clk-bindings:
dt-bindings: clock: ti,cdce925: Convert to DT schema
* clk-renesas: (26 commits)
clk: renesas: r8a779f0: Fix Ethernet Switch clocks
clk: renesas: r8a779g0: Add Z0 clock support
clk: renesas: r8a779g0: Add CMT clocks
clk: renesas: r8a779g0: Add TMU and SASYNCRT clocks
clk: renesas: r8a779f0: Fix SCIF parent clocks
clk: renesas: r8a779f0: Fix HSCIF parent clocks
clk: renesas: r9a06g032: Repair grave increment error
clk: renesas: rzg2l: Don't assume all CPG_MOD clocks support PM
clk: renesas: rzg2l: Fix typo in struct rzg2l_cpg_priv kerneldoc
clk: renesas: r8a779a0: Fix SD0H clock name
clk: renesas: r8a779g0: Add RPC-IF clock
clk: renesas: r8a779g0: Add SDHI clocks
clk: renesas: r8a779f0: Add SASYNCPER internal clock
clk: renesas: r8a779f0: Fix SD0H clock name
clk: renesas: r9a07g043: Drop WDT2 clock and reset entry
clk: renesas: r9a07g044: Drop WDT2 clock and reset entry
clk: renesas: r8a779g0: Add TPU clock
clk: renesas: r8a779g0: Add PWM clock
clk: renesas: r8a779g0: Add SCIF clocks
clk: renesas: r9a07g044: Add MTU3a clock and reset entry
...
* clk-amlogic:
clk: meson: pll: add pcie lock retry workaround
clk: meson: pll: adjust timeout in meson_clk_pll_wait_lock()
* clk-allwinner:
clk: sunxi-ng: f1c100s: Add IR mod clock
clk: sunxi-ng: v3s: Correct the header guard of ccu-sun8i-v3s.h
* clk-ti:
clk: ti: fix typo in ti_clk_retry_init() code comment
clk: ti: dra7-atl: don't allocate `parent_names' variable
clk: ti: change ti_clk_register[_omap_hw]() API
|
|
Pull ARM SoC DT updates from Arnd Bergmann:
"The devicetree changes contain exactly 1000 non-merge changesets,
including a number of new arm64 SoC variants from Qualcomm and Apple,
as well as the Renesas r9a07g043f/u chip in both arm64 and riscv
variants.
While we have occasionally merged support for non-arm SoCs in the
past, this is now the normal path for riscv devicetree files.
The most notable changes, by SoC platform, are:
- The Apple T6000 (M1 Pro), T6001 (M1 Max) and T6002 (M1 Ultra) chips
now have initial support. This is particularly nice as I am typing
this on a T6002 Mac Studio with only a small number of driver
patches.
- Qualcomm MSM8996 Pro (Snapdragon 821), SM6115 (Snapdragon 662),
SM4250 (Snapdragon 460), SM6375 (Snapdragon 695), SDM670
(Snapdragon 670), MSM8976 (Snapdragon 652) and MSM8956 (Snapdragon
650) are all mobile phone chips that are closely related to others
we already support.
Adding those helps support more phones and we add several models
from Sony (Xperia 10 IV, 5 IV, X, and X compact), OnePlus (One, 3,
3T, and Nord N100), Xiaomi (Poco F1, Mi6), Huawei (Watch) and
Google (Pixel 3a).
There are also new variants of the Herobrine and Trogdor chromebook
motherboards. SA8540P is an automotive SoC used in the Qdrive-3
development platform
- Rockchips gains no new SoC variants, but a lot of new boards: three
mobile gaming systems based on RK3326 Odroid-Go/rg351 family, two
more Anbernic gaming systems based on RK3566 and a number of other
RK356x based single-board computers.
- Renesas RZ/G2UL (r9a07g043) was already supported for arm64, but as
the newly added RZ/Five is based on the same design, this now gets
reorganized in order to share most of the dts description between
the two and add the RZ/Five SMARC EVK board support.
Aside from that, there are the usual changes all over the tree:
- New boards on other platforms contain two ASpeed BMC users, two
Broadcom based Wifi routers, Zyxel NSA310S NAS, the i.MX6 based
Kobo Aura2 ebook reader, two i.MX8 based development boards, two
Uniphier Pro5 development boards, the STM32MP1 testbench board from
DHCOR, the TI K3 based BeagleBone AI-64 board, and the Mediatek
Helio X10 based Sony Xperia M5 phone.
- The Starfive JH7100 source gets reorganized in order to support the
VisionFive V1 board.
- Minor updates and cleanups for Intel SoCFPGA, Marvell PXA168, TI,
ST, NXP, Apple, Broadcom, Juno, Marvell MVEBU, at91, nuvoton,
Tegra, Mediatek, Renesas, Hisilicon, Allwinner, Samsung, ux500,
spear, ... The treewide cleanups now have a lot of fixes for cache
nodes and other binding violoations.
- Somewhat larger sets of reworks for NVIDIA Tegra, Qualcomm and
Renesas platforms, adding a lot more on-chip device support
- A rework of the way that DTB overlays are built"
* tag 'soc-dt-6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (979 commits)
arm64: dts: apple: t6002: Fix GPU power domains
arm64: dts: apple: t600x-pmgr: Fix search & replace typo
arm64: dts: apple: Add t8103 L1/L2 cache properties and nodes
arm64: dts: apple: Rename dart-sio* to sio-dart*
arch: arm64: apple: t600x: Use standard "iommu" node name
arch: arm64: apple: t8103: Use standard "iommu" node name
ARM: dts: socfpga: Fix pca9548 i2c-mux node name
dt-bindings: iio: adc: qcom,spmi-vadc: fix PM8350 define
dt-bindings: iio: adc: qcom,spmi-vadc: extend example
arm64: dts: qcom: sc8280xp: fix UFS DMA coherency
arm64: dts: qcom: sc7280: Add DT for sc7280-herobrine-zombie
arm64: dts: qcom: sm8250-sony-xperia-edo: fix no-mmc property for SDHCI
arm64: dts: qcom: sdm845-sony-xperia-tama: fix no-mmc property for SDHCI
arm64: dts: qcom: sda660-inforce-ifc6560: fix no-mmc property for SDHCI
arm64: dts: qcom: sa8155p-adp: fix no-mmc property for SDHCI
arm64: dts: qcom: qrb5165-rb: fix no-mmc property for SDHCI
arm64: dts: qcom: sm8450: align MMC node names with dtschema
arm64: dts: qcom: sc7180-trogdor: use generic node names
arm64: dts: qcom: sm8450-hdk: add sound support
arm64: dts: qcom: sm8450: add Soundwire and LPASS
...
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/drivers
More Qualcomm driver updates for 6.2
Socinfo is extended with knowledge about MSM8956, MSM8976, SM6115,
SM4250, SM8150, SA8155 and SM8550.
Support for RSC v3, as found in SM8550 is added to the RPMH RSC driver.
Support for SM8550 and SM4250 ARC regulators are added to the RPM(h)
power-domain drivers. SM8550 support is added to the LLCC driver.
The AOSS QMP binding is declared compatible for SM8550.
BWMON and LLCC now selects REGMAP_MMIO to ensure dependencies are built
properly.
* tag 'qcom-drivers-for-6.2-2' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
soc: qcom: socinfo: Add SM6115 / SM4250 SoC IDs to the soc_id table
dt-bindings: arm: qcom,ids: Add SoC IDs for SM6115 / SM4250 and variants
soc: qcom: socinfo: Add SM8150 and SA8155 SoC IDs to the soc_id table
dt-bindings: arm: qcom,ids: Add SoC IDs for SM8150 and SA8155
dt-bindings: soc: qcom: apr: document generic qcom,apr compatible
soc: qcom: Select REMAP_MMIO for ICC_BWMON driver
soc: qcom: Select REMAP_MMIO for LLCC driver
soc: qcom: rpmpd: Add SM4250 support
dt-bindings: power: rpmpd: Add SM4250 support
dt-bindings: soc: qcom: aoss: Add compatible for SM8550
soc: qcom: llcc: Add configuration data for SM8550
dt-bindings: arm: msm: Add LLCC compatible for SM8550
soc: qcom: llcc: Add v4.1 HW version support
soc: qcom: socinfo: Add SM8550 ID
soc: qcom: rpmh-rsc: Avoid unnecessary checks on irq-done response
soc: qcom: rpmh-rsc: Add support for RSC v3 register offsets
soc: qcom: rpmhpd: Add SM8550 power domains
dt-bindings: power: rpmpd: Add SM8550 to rpmpd binding
soc: qcom: socinfo: Add MSM8956/76 SoC IDs to the soc_id table
dt-bindings: arm: qcom,ids: Add SoC IDs for MSM8956 and MSM8976
Link: https://lore.kernel.org/r/20221207154134.3233779-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Add SoC IDs for Qualcomm SM6115 / SM4250 and variants.
Cc: Bjorn Andersson <andersson@kernel.org>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>
Cc: Konrad Dybcio <konrad.dybcio@somainline.org>
Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221201141619.2462705-4-bhupesh.sharma@linaro.org
|
|
Add SoC IDs for Qualcomm SM8150 and SA8155 SoCs.
Cc: Bjorn Andersson <andersson@kernel.org>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>
Cc: Konrad Dybcio <konrad.dybcio@somainline.org>
Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221201141619.2462705-2-bhupesh.sharma@linaro.org
|
|
Add compatible and constants for the power domains exposed by the
SM4250 RPM.
Cc: Bjorn Andersson <andersson@kernel.org>
Cc: Rajendra Nayak <rnayak@codeaurora.org>
Cc: Konrad Dybcio <konrad.dybcio@somainline.org>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>
Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221127112204.1486337-2-bhupesh.sharma@linaro.org
|
|
Add the ID for the Qualcomm SM8550 SoC.
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221116112438.2643607-1-abel.vesa@linaro.org
|
|
Add compatible and constants for the power domains exposed by the RPMH
in the Qualcomm SM8550 platform.
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221116111745.2633074-2-abel.vesa@linaro.org
|
|
Document the identifier of MSM8956/76.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221111120156.48040-7-angelogioacchino.delregno@collabora.com
|
|
Add device tree bindings for global clock controller on SM8550 SoCs.
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221130112852.2977816-2-abel.vesa@linaro.org
|
|
Add bindings for the missing networking resets found in IPQ8074 GCC.
Signed-off-by: Robert Marko <robimarko@gmail.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221107132901.489240-2-robimarko@gmail.com
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/dt
Qualcomm ARM64 DTS updates for 6.2
This introduces support for SM4250, SM6115, SM6375 and SDM670 platforms
and Sony Xperia 10 IV, Google Pixel 3a, OnePlus 3, OnePlus 3T, Google
Pazquel and OnePlus Nord N100.
A wide variety of updates to align with DeviceTree bindings across
many/most platforms is introduced, and incorrectly styled comments are
adjusted across the tree.
Apps RSC is added to the cluster-idle power-domain across SM8150,
SM8250, SM8350 and SM8450, to ensure sleep and wake votes are flushed as
the last core is being powered down.
Remoteproc firmware patches are aligned with agreed upon structure used
in linux-firmware across Inforce 6560, Lenovo Miix 630, various Sony
Xperia devices and Samsung Galaxy Book2 (although these are not
available in linux-firmware today).
On IPQ8074 CPU clocks are added, thermal zones are introduced and vqmmc
supply is specified for the HK01 board.
Alcatel OneTouch Idol 3 gains LED nodes and Samsung Galaxy A3U gained
vibrator support.
The application subsystem's IOMMU and the display subsystem is enabled
for MSM8953.
A new CPU frequency table is introduced for MSM8996Pro, to properly
describe it separate of MSM8996. The GPU opp-table is extended as well.
On SC7180 USB is marked as a wakeup source, USB gains required-opps to
ensure that the core voltage rail is voted for as needed. The
description of the fingerprint sensor in Trogdor is corrected.
On SC7280 Wake-on-WLAN is introduced, and PHY parameters for the SNPS
USB PHY is defined across SC7280.
The memory map across Google Herobrine is adjusted, to regain unused
memory on the WiFi SKUs. A LTE SKU of the Evoker board is introduced
and the bard gains touchscreen.
NVME support is disabled on Villager boards, as it's not used.
PCIe support is introduced on SC8280XP, with NVMe, SDX55 (5G) and WiFi
enabled on the Lenovo Thinkpad X13s and Compute Reference Device. ADCs
and thermal zones are intrduced for the same. Lenovo Thinkpad X13s
gains LID switch support.
Fairphone FP3 gains touchscreen support.
Support for Xiaomi Poco F1 variant with EBBG panel.
The round-robin ADC is enabled across DB845c, OnePlus devices and
Pocophone F1 devices.
The displayport controller on SDM845 is introduced.
SM6350 gains SDHCI support and on Sony Xperia 10 III sd-card,
touchscreen and GPI DMA is enabled.
Fairphone FP4 got SD-card support.
UFS PHY register ranges are corrected across SM8150, SM8250, SM8350 and
SM8450.
Sony Xperia 1 II got NFC support and Sony Xperia 5 III got PMIC
regulators defined and USB definition corrected, to enable USB3.
The SDHCI controller is described for SM8450 and microSD support is
enabled for the HDK and QRD devices.
SM8450 also gains camera CCI interface and display clock controller.
* tag 'qcom-arm64-for-6.2' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (261 commits)
arm64: dts: qcom: sdm845-polaris: Don't duplicate DMA assignment
arm64: dts: qcom: sm8350-sagami: Wire up USB regulators and fix USB3
arm64: dts: qcom: sm8350-sagami: Add most RPMh regulators
arm64: dts: qcom: sc7280: Make herobrine-audio-rt5682 mic dtsi's match more
arm64: dts: qcom: trim addresses to 8 digits
arm64: dts: msm8998: unify PCIe clock order withMSM8996
arm64: dts: msm8998: add MSM8998 specific compatible
arm64: dts: qcom: sc8280xp-x13s: enable WiFi controller
arm64: dts: qcom: sc8280xp-x13s: enable modem
arm64: dts: qcom: sc8280xp-x13s: enable NVMe SSD
arm64: dts: qcom: sc8280xp-crd: enable WiFi controller
arm64: dts: qcom: sc8280xp-crd: enable SDX55 modem
arm64: dts: qcom: sc8280xp-crd: enable NVMe SSD
arm64: dts: qcom: sc8280xp-crd: rename backlight and misc regulators
arm64: dts: qcom: sa8295p-adp: enable PCIe
arm64: dts: qcom: sc8280xp/sa8540p: add PCIe2-4 nodes
arm64: dts: qcom: add sdm670 and pixel 3a device trees
arm64: dts: qcom: sc7280: Add Google Herobrine WIFI SKU dts fragment
arm64: dts: qcom: sc7280: Mark all Qualcomm reference boards as LTE
arm64: dts: qcom: sm7225-fairphone-fp4: Enable SD card
...
Link: https://lore.kernel.org/r/20221124100650.1982448-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into asahi-wip
New boards:
- Model A and blade baseboards for the SOQuartz (rk3568) SoM,
- Anberic RG351M, RG353V, RG353VS; Odroid Go Super, Advance gaming devices
- Odroid M1
- Theobroma px30 SoM with baseboard
- Rockchip's own rk3566 demo board
Some core support for per SoC specifics:
- crypto support for rk3399 and rk3328
- second I2S controller for rk3568
- Cache properties for follow the binding for rk3308 and rk3328
Bigger device support updates for:
- SOQuartz: PCIe2, video output, gpu, HDMI sound
- Rock 3A: eth regulator, eth clock input, Wifi+Bt, I2S, PCIe3
As well as some minor extensions for Rock960 (hdmi supplies),
rk3566-roc-pc (PCIe2), Rock 4C+ (thermal support), Pinephone Pro (Wifi+Bt)
* tag 'v6.2-rockchip-dts64-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: (51 commits)
arm64: dts: rockchip: update cache properties for rk3308 and rk3328
arm64: dts: rockchip: Add SOQuartz Model A baseboard
dt-bindings: arm: rockchip: Add SOQuartz Model A
arm64: dts: rockchip: Add SOQuartz blade board
dt-bindings: arm: rockchip: Add SOQuartz Blade
arm64: dts: rockchip: Add Anbernic RG351M
arm64: dts: rockchip: Add Odroid Go Super
arm64: dts: rockchip: Add Odroid Go Advance Black Edition
dt-bindings: arm: rockchip: Add more RK3326 devices
arm64: dts: rockchip: Move most of Odroid Go Advance DTS into a DTSI
arm64: dts: rockchip: Add support of regulator for ethernet node on Rock 3A SBC
arm64: dts: rockchip: Add support of external clock to ethernet node on Rock 3A SBC
arm64: dts: rockchip: Add HDMI supplies on Rock960
arm64: dts: rockchip: Add dts for rockchip rk3566 box demo board
dt-bindings: rockchip: Add Rockchip rk3566 box demo board
arm64: dts: rockchip: Enable PCIe 2 on SOQuartz CM4IO
arm64: dts: rockchip: Enable HDMI sound on SOQuartz
arm64: dts: rockchip: Enable video output and HDMI on SOQuartz
arm64: dts: rockchip: Enable GPU on SOQuartz CM4
arm64: dts: rockchip: enable pcie2 on rk3566-roc-pc
...
Link: https://lore.kernel.org/r/4716610.aeNJFYEL58@phil
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Xilinx ZynqMP platform has dual-core ARM Cortex R5 Realtime Processing
Unit(RPU) subsystem. This patch adds dt-bindings for RPU subsystem
(cluster).
Signed-off-by: Tanmay Shah <tanmay.shah@amd.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20221114233940.2096237-2-tanmay.shah@amd.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
|
|
Unlike audio_pll1 and audio_pll2, there is no video_pll2. Further, the
name used in the RM is video_pll. So, let's rename "video_pll1" to
"video_pll" to be consistent with the RM and avoid misunderstandings.
The IMX8MN_VIDEO_PLL1* constants have not been removed to ensure
backward compatibility of the patch.
No functional changes intended.
Fixes: 96d6392b54dbb ("clk: imx: Add support for i.MX8MN clock driver")
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Acked-by: Marco Felsch <m.felsch@pengutronix.de>
Reviewed-by: Abel Vesa <abel.vesa@linaro.org>
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Link: https://lore.kernel.org/r/20221117113637.1978703-4-dario.binacchi@amarulasolutions.com
|
|
The IMX8MN platform does not have any video processing unit (VPU), and
indeed in the reference manual (document IMX8MNRM Rev 2, 07/2022) there
is no occurrence of its pll. From an analysis of the code and the RM
itself, I think vpu pll is used instead of m7 alternate pll, probably
for copy and paste of code taken from modules of similar architectures.
As an example for all, if we consider the second row of the "Clock Root"
table of chapter 5 (Clocks and Power Management) of the RM:
Clock Root offset Source Select (CCM_TARGET_ROOTn[MUX])
... ... ...
ARM_M7_CLK_ROOT 0x8080 000 - 24M_REF_CLK
001 - SYSTEM_PLL2_DIV5
010 - SYSTEM_PLL2_DIV4
011 - M7_ALT_PLL_CLK
100 - SYSTEM_PLL1_CLK
101 - AUDIO_PLL1_CLK
110 - VIDEO_PLL_CLK
111 - SYSTEM_PLL3_CLK
... ... ...
but in the source code, the imx8mn_m7_sels clocks list contains vpu_pll
for the source select bits 011b.
So, let's rename "vpu_pll" to "m7_alt_pll" to be consistent with the RM.
The IMX8MN_VPU_* constants have not been removed to ensure backward
compatibility of the patch.
No functional changes intended.
Fixes: 96d6392b54dbb ("clk: imx: Add support for i.MX8MN clock driver")
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Acked-by: Marco Felsch <m.felsch@pengutronix.de>
Reviewed-by: Abel Vesa <abel.vesa@linaro.org>
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Link: https://lore.kernel.org/r/20221117113637.1978703-2-dario.binacchi@amarulasolutions.com
|