summaryrefslogtreecommitdiff
path: root/include/linux/acpi.h
AgeCommit message (Collapse)AuthorFilesLines
2015-07-02Merge tag 'pm+acpi-4.2-rc1-2' of ↵Linus Torvalds1-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management and ACPI fixes from Rafael Wysocki: "These are fixes that didn't make it to the previous PM+ACPI pull request or are fixing issues introduced by it. Specifics: - Fix a recently added memory leak in an error path in the ACPI resources management code (Dan Carpenter) - Fix a build warning triggered by an ACPI video header function that should be static inline (Borislav Petkov) - Change names of helper function converting struct fwnode_handle pointers to either struct device_node or struct acpi_device pointers so they don't conflict with local variable names (Alexander Sverdlin) - Make the hibernate core re-enable nonboot CPUs on failures to disable them as expected (Vitaly Kuznetsov) - Increase the default timeout of the device suspend watchdog to prevent it from triggering too early on some systems (Takashi Iwai) - Prevent the cpuidle powernv driver from registering idle states with CPUIDLE_FLAG_TIMER_STOP set if CONFIG_TICK_ONESHOT is unset which leads to boot hangs (Preeti U Murthy)" * tag 'pm+acpi-4.2-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: tick/idle/powerpc: Do not register idle states with CPUIDLE_FLAG_TIMER_STOP set in periodic mode PM / sleep: Increase default DPM watchdog timeout to 60 PM / hibernate: re-enable nonboot cpus on disable_nonboot_cpus() failure ACPI / OF: Rename of_node() and acpi_node() to to_of_node() and to_acpi_node() ACPI / video: Inline acpi_video_set_dmi_backlight_type ACPI / resources: free memory on error in add_region_before()
2015-06-29Merge tag 'libnvdimm-for-4.2' of ↵Linus Torvalds1-0/+5
git://git.kernel.org/pub/scm/linux/kernel/git/djbw/nvdimm Pull libnvdimm subsystem from Dan Williams: "The libnvdimm sub-system introduces, in addition to the libnvdimm-core, 4 drivers / enabling modules: NFIT: Instantiates an "nvdimm bus" with the core and registers memory devices (NVDIMMs) enumerated by the ACPI 6.0 NFIT (NVDIMM Firmware Interface table). After registering NVDIMMs the NFIT driver then registers "region" devices. A libnvdimm-region defines an access mode and the boundaries of persistent memory media. A region may span multiple NVDIMMs that are interleaved by the hardware memory controller. In turn, a libnvdimm-region can be carved into a "namespace" device and bound to the PMEM or BLK driver which will attach a Linux block device (disk) interface to the memory. PMEM: Initially merged in v4.1 this driver for contiguous spans of persistent memory address ranges is re-worked to drive PMEM-namespaces emitted by the libnvdimm-core. In this update the PMEM driver, on x86, gains the ability to assert that writes to persistent memory have been flushed all the way through the caches and buffers in the platform to persistent media. See memcpy_to_pmem() and wmb_pmem(). BLK: This new driver enables access to persistent memory media through "Block Data Windows" as defined by the NFIT. The primary difference of this driver to PMEM is that only a small window of persistent memory is mapped into system address space at any given point in time. Per-NVDIMM windows are reprogrammed at run time, per-I/O, to access different portions of the media. BLK-mode, by definition, does not support DAX. BTT: This is a library, optionally consumed by either PMEM or BLK, that converts a byte-accessible namespace into a disk with atomic sector update semantics (prevents sector tearing on crash or power loss). The sinister aspect of sector tearing is that most applications do not know they have a atomic sector dependency. At least today's disk's rarely ever tear sectors and if they do one almost certainly gets a CRC error on access. NVDIMMs will always tear and always silently. Until an application is audited to be robust in the presence of sector-tearing the usage of BTT is recommended. Thanks to: Ross Zwisler, Jeff Moyer, Vishal Verma, Christoph Hellwig, Ingo Molnar, Neil Brown, Boaz Harrosh, Robert Elliott, Matthew Wilcox, Andy Rudoff, Linda Knippers, Toshi Kani, Nicholas Moulin, Rafael Wysocki, and Bob Moore" * tag 'libnvdimm-for-4.2' of git://git.kernel.org/pub/scm/linux/kernel/git/djbw/nvdimm: (33 commits) arch, x86: pmem api for ensuring durability of persistent memory updates libnvdimm: Add sysfs numa_node to NVDIMM devices libnvdimm: Set numa_node to NVDIMM devices acpi: Add acpi_map_pxm_to_online_node() libnvdimm, nfit: handle unarmed dimms, mark namespaces read-only pmem: flag pmem block devices as non-rotational libnvdimm: enable iostat pmem: make_request cleanups libnvdimm, pmem: fix up max_hw_sectors libnvdimm, blk: add support for blk integrity libnvdimm, btt: add support for blk integrity fs/block_dev.c: skip rw_page if bdev has integrity libnvdimm: Non-Volatile Devices tools/testing/nvdimm: libnvdimm unit test infrastructure libnvdimm, nfit, nd_blk: driver for BLK-mode access persistent memory nd_btt: atomic sector updates libnvdimm: infrastructure for btt devices libnvdimm: write blk label set libnvdimm: write pmem label set libnvdimm: blk labels and namespace instantiation ...
2015-06-26acpi: Add acpi_map_pxm_to_online_node()Toshi Kani1-0/+5
The kernel initializes CPU & memory's NUMA topology from ACPI SRAT table. Some other ACPI tables, such as NFIT and DMAR, also contain proximity IDs for their device's NUMA topology. This information can be used to improve performance of these devices. This patch introduces acpi_map_pxm_to_online_node(), which is similar to acpi_map_pxm_to_node(), but always returns an online node. When the mapped node from a given proximity ID is offline, it looks up the node distance table and returns the nearest online node. ACPI device drivers, which are called after the NUMA initialization has completed in the kernel, can call this interface to obtain their device NUMA topology from ACPI tables. Such drivers do not have to deal with offline nodes. A node may be offline when a device proximity ID is unique, SRAT memory entry does not exist, or NUMA is disabled, ex. "numa=off" on x86. This patch also moves the pxm range check from acpi_get_node() to acpi_map_pxm_to_node(). Signed-off-by: Toshi Kani <toshi.kani@hp.com> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2015-06-26Merge branches 'acpi-video', 'device-properties', 'pm-sleep' and 'pm-cpuidle'Rafael J. Wysocki1-2/+2
* acpi-video: ACPI / video: Inline acpi_video_set_dmi_backlight_type * device-properties: ACPI / OF: Rename of_node() and acpi_node() to to_of_node() and to_acpi_node() * pm-sleep: PM / sleep: Increase default DPM watchdog timeout to 60 PM / hibernate: re-enable nonboot cpus on disable_nonboot_cpus() failure * pm-cpuidle: tick/idle/powerpc: Do not register idle states with CPUIDLE_FLAG_TIMER_STOP set in periodic mode
2015-06-24ACPI / OF: Rename of_node() and acpi_node() to to_of_node() and to_acpi_node()Alexander Sverdlin1-2/+2
Commit 8a0662d9 introduced of_node and acpi_node symbols in global namespace but there were already ~63 of_node local variables or function parameters (no single acpi_node though, but anyway). After debugging undefined but used of_node local varible (which turned out to reference static function of_node() instead) it became clear that the names for the functions are too short and too generic for global scope. Signed-off-by: Alexander Sverdlin <alexander.sverdlin@gmail.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-06-24Merge tag 'pm+acpi-4.2-rc1' of ↵Linus Torvalds1-40/+29
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management and ACPI updates from Rafael Wysocki: "The rework of backlight interface selection API from Hans de Goede stands out from the number of commits and the number of affected places perspective. The cpufreq core fixes from Viresh Kumar are quite significant too as far as the number of commits goes and because they should reduce CPU online/offline overhead quite a bit in the majority of cases. From the new featues point of view, the ACPICA update (to upstream revision 20150515) adding support for new ACPI 6 material to ACPICA is the one that matters the most as some new significant features will be based on it going forward. Also included is an update of the ACPI device power management core to follow ACPI 6 (which in turn reflects the Windows' device PM implementation), a PM core extension to support wakeup interrupts in a more generic way and support for the ACPI _CCA device configuration object. The rest is mostly fixes and cleanups all over and some documentation updates, including new DT bindings for Operating Performance Points. There is one fix for a regression introduced in the 4.1 cycle, but it adds quite a number of lines of code, it wasn't really ready before Thursday and you were on vacation, so I refrained from pushing it on the last minute for 4.1. Specifics: - ACPICA update to upstream revision 20150515 including basic support for ACPI 6 features: new ACPI tables introduced by ACPI 6 (STAO, XENV, WPBT, NFIT, IORT), changes related to the other tables (DTRM, FADT, LPIT, MADT), new predefined names (_BTH, _CR3, _DSD, _LPI, _MTL, _PRR, _RDI, _RST, _TFP, _TSN), fixes and cleanups (Bob Moore, Lv Zheng). - ACPI device power management core code update to follow ACPI 6 which reflects the ACPI device power management implementation in Windows (Rafael J Wysocki). - rework of the backlight interface selection logic to reduce the number of kernel command line options and improve the handling of DMI quirks that may be involved in that and to make the code generally more straightforward (Hans de Goede). - fixes for the ACPI Embedded Controller (EC) driver related to the handling of EC transactions (Lv Zheng). - fix for a regression related to the ACPI resources management and resulting from a recent change of ACPI initialization code ordering (Rafael J Wysocki). - fix for a system initialization regression related to ACPI introduced during the 3.14 cycle and caused by running the code that switches the platform over to the ACPI mode too early in the initialization sequence (Rafael J Wysocki). - support for the ACPI _CCA device configuration object related to DMA cache coherence (Suravee Suthikulpanit). - ACPI/APEI fixes and cleanups (Jiri Kosina, Borislav Petkov). - ACPI battery driver cleanups (Luis Henriques, Mathias Krause). - ACPI processor driver cleanups (Hanjun Guo). - cleanups and documentation update related to the ACPI device properties interface based on _DSD (Rafael J Wysocki). - ACPI device power management fixes (Rafael J Wysocki). - assorted cleanups related to ACPI (Dominik Brodowski, Fabian Frederick, Lorenzo Pieralisi, Mathias Krause, Rafael J Wysocki). - fix for a long-standing issue causing General Protection Faults to be generated occasionally on return to user space after resume from ACPI-based suspend-to-RAM on 32-bit x86 (Ingo Molnar). - fix to make the suspend core code return -EBUSY consistently in all cases when system suspend is aborted due to wakeup detection (Ruchi Kandoi). - support for automated device wakeup IRQ handling allowing drivers to make their PM support more starightforward (Tony Lindgren). - new tracepoints for suspend-to-idle tracing and rework of the prepare/complete callbacks tracing in the PM core (Todd E Brandt, Rafael J Wysocki). - wakeup sources framework enhancements (Jin Qian). - new macro for noirq system PM callbacks (Grygorii Strashko). - assorted cleanups related to system suspend (Rafael J Wysocki). - cpuidle core cleanups to make the code more efficient (Rafael J Wysocki). - powernv/pseries cpuidle driver update (Shilpasri G Bhat). - cpufreq core fixes related to CPU online/offline that should reduce the overhead of these operations quite a bit, unless the CPU in question is physically going away (Viresh Kumar, Saravana Kannan). - serialization of cpufreq governor callbacks to avoid race conditions in some cases (Viresh Kumar). - intel_pstate driver fixes and cleanups (Doug Smythies, Prarit Bhargava, Joe Konno). - cpufreq driver (arm_big_little, cpufreq-dt, qoriq) updates (Sudeep Holla, Felipe Balbi, Tang Yuantian). - assorted cleanups in cpufreq drivers and core (Shailendra Verma, Fabian Frederick, Wang Long). - new Device Tree bindings for representing Operating Performance Points (Viresh Kumar). - updates for the common clock operations support code in the PM core (Rajendra Nayak, Geert Uytterhoeven). - PM domains core code update (Geert Uytterhoeven). - Intel Knights Landing support for the RAPL (Running Average Power Limit) power capping driver (Dasaratharaman Chandramouli). - fixes related to the floor frequency setting on Atom SoCs in the RAPL power capping driver (Ajay Thomas). - runtime PM framework documentation update (Ben Dooks). - cpupower tool fix (Herton R Krzesinski)" * tag 'pm+acpi-4.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (194 commits) cpuidle: powernv/pseries: Auto-promotion of snooze to deeper idle state x86: Load __USER_DS into DS/ES after resume PM / OPP: Add binding for 'opp-suspend' PM / OPP: Allow multiple OPP tables to be passed via DT PM / OPP: Add new bindings to address shortcomings of existing bindings ACPI: Constify ACPI device IDs in documentation ACPI / enumeration: Document the rules regarding the PRP0001 device ID ACPI / video: Make acpi_video_unregister_backlight() private acpi-video-detect: Remove old API toshiba-acpi: Port to new backlight interface selection API thinkpad-acpi: Port to new backlight interface selection API sony-laptop: Port to new backlight interface selection API samsung-laptop: Port to new backlight interface selection API msi-wmi: Port to new backlight interface selection API msi-laptop: Port to new backlight interface selection API intel-oaktrail: Port to new backlight interface selection API ideapad-laptop: Port to new backlight interface selection API fujitsu-laptop: Port to new backlight interface selection API eeepc-laptop: Port to new backlight interface selection API dell-wmi: Port to new backlight interface selection API ...
2015-06-19Merge branch 'acpi-cca'Rafael J. Wysocki1-0/+5
* acpi-cca: ufs: fix TRUE and FALSE re-define build error megaraid_sas: fix TRUE and FALSE re-define build error amd-xgbe: Unify coherency checking logic with device_dma_is_coherent() crypto: ccp - Unify coherency checking logic with device_dma_is_coherent() device property: Introduces device_dma_is_coherent() arm64 : Introduce support for ACPI _CCA object ACPI / scan: Parse _CCA and setup device coherency
2015-06-19Merge branch 'acpi-video'Rafael J. Wysocki1-40/+2
* acpi-video: (38 commits) ACPI / video: Make acpi_video_unregister_backlight() private acpi-video-detect: Remove old API toshiba-acpi: Port to new backlight interface selection API thinkpad-acpi: Port to new backlight interface selection API sony-laptop: Port to new backlight interface selection API samsung-laptop: Port to new backlight interface selection API msi-wmi: Port to new backlight interface selection API msi-laptop: Port to new backlight interface selection API intel-oaktrail: Port to new backlight interface selection API ideapad-laptop: Port to new backlight interface selection API fujitsu-laptop: Port to new backlight interface selection API eeepc-laptop: Port to new backlight interface selection API dell-wmi: Port to new backlight interface selection API dell-laptop: Port to new backlight interface selection API compal-laptop: Port to new backlight interface selection API asus-wmi: Port to new backlight interface selection API asus-laptop: Port to new backlight interface selection API apple-gmux: Port to new backlight interface selection API acer-wmi: Port to new backlight interface selection API ACPI / video: Fix acpi_video _register vs _unregister_backlight race ...
2015-06-19Merge branches 'acpi-battery' and 'acpi-processor'Rafael J. Wysocki1-0/+10
* acpi-battery: ACPI / battery: mark DMI table as __initconst ACPI / battery: minor tweaks to acpi_battery_units() ACPI / battery: constify the offset tables ACPI / battery: ensure acpi_battery_init() has finish ACPI / battery: drop useless return statements ACPI / battery: abort initialization earlier if acpi_disabled * acpi-processor: ACPI / processor: constify DMI system id table ACPI / processor: Introduce invalid_phys_cpuid() ACPI / processor: return specific error instead of -1 ACPI / processor: remove phys_id in acpi_processor_get_info() ACPI / processor: remove cpu_index in acpi_processor_get_info() Xen / ACPI / processor: Remove unneeded NULL check Xen / ACPI / processor: use invalid_logical_cpuid() ACPI / processor: Introduce invalid_logical_cpuid()
2015-06-19Merge branches 'acpi-init', 'acpi-pnp', 'acpi-scan', 'acpi-proc' and 'acpi-doc'Rafael J. Wysocki1-0/+12
* acpi-init: ACPI / init: Switch over platform to the ACPI mode later * acpi-pnp: ACPI / PNP: Avoid conflicting resource reservations * acpi-scan: ACPI / scan: constify ACPI device ids ACPI / property: Define a symbol for PRP0001 ACPI / property: Refine consistency check for PRP0001 * acpi-proc: ACPI / proc: make ACPI_PROCFS_POWER X86 only * acpi-doc: ACPI: Constify ACPI device IDs in documentation ACPI / enumeration: Document the rules regarding the PRP0001 device ID ACPI: fix kernel-parameters ordering in Documentation
2015-06-19acpi-video-detect: Remove old APIHans de Goede1-19/+0
Remove the old backlight interface selection API now that all drivers have been ported to the new API. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Darren Hart <dvhart@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-06-19acpi-video-detect: video: Make video_detect code part of the video moduleHans de Goede1-0/+1
This is a preparation patch for the backlight interface selection logic cleanup, there are 2 reasons to not always build the video_detect code into the kernel: 1) In order for the video_detect.c to also deal with / select native backlight interfaces on win8 systems, instead of doing this in video.c where it does not belong, video_detect.c needs to call into the backlight class code. Which cannot be done if it is builtin and the blacklight class is not. 2) Currently all the platform/x86 drivers which have quirks to prefer the vendor driver over acpi-video call acpi_video_unregister_backlight() to remove the acpi-video backlight interface, this logic really belongs in video_detect.c, which will cause video_detect.c to depend on symbols of video.c and video.c already depends on video_detect.c symbols, so they really need to be a single module. Note that this commits make 2 changes so as to maintain 100% kernel commandline compatibility: 1) The __setup call for the acpi_backlight= handling is moved to acpi/util.c as __setup may only be used by code which is alwasy builtin 2) video.c is renamed to acpi_video.c so that it can be combined with video_detect.c into video.ko This commit also makes changes to drivers/platform/x86/Kconfig to ensure that drivers which use acpi_video_backlight_support() from video_detect.c, will not be built-in when acpi_video is not built in. This also changes some "select" uses to "depends on" to avoid dependency loops. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Darren Hart <dvhart@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-06-19acpi-video-detect: Move acpi_osi_is_win8 to osl.cHans de Goede1-0/+1
acpi_osi_is_win8 needs access to acpi_gbl_osi_data which is not exported, so move it to osl.c. Alternatively we could export acpi_gbl_osi_data but that seems undesirable. This allows video_detect.c to be build as a module, besides that acpi_osi_is_win8() is something which does not really belong in video_detect.c in the first place. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Darren Hart <dvhart@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-06-19acpi-video-detect: Move acpi_is_video_device() to acpi/scan.cHans de Goede1-6/+2
This allows video_detect.c to be build as a module, this is a preparation patch for the backlight interface selection logic cleanup. Note this commit also causes acpi_is_video_device() to always be build indepedent of CONFIG_ACPI_VIDEO, as there is no reason to make its building depend on CONFIG_ACPI_VIDEO. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Darren Hart <dvhart@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-06-19acpi-video-detect: Make acpi_video_get_capabilities a private functionHans de Goede1-12/+0
acpi_video_get_capabilities() is only used inside video_detect.c so make it static. While at it also remove the prototype for the non existent acpi_video_display_switch_support function from acpi.h Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Darren Hart <dvhart@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-06-19acpi-video-detect: Remove the unused acpi_video_dmi_demote_vendor() functionHans de Goede1-5/+0
Remove the now unused acpi_video_dmi_demote_vendor() function, this was never a proper counter part of acpi_video_dmi_promote_vendor() since the calls to acpi_video_dmi_promote_vendor() are not counted. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Darren Hart <dvhart@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-06-18ACPI / PNP: Avoid conflicting resource reservationsRafael J. Wysocki1-0/+10
Commit b9a5e5e18fbf "ACPI / init: Fix the ordering of acpi_reserve_resources()" overlooked the fact that the memory and/or I/O regions reserved by acpi_reserve_resources() may conflict with those reserved by the PNP "system" driver. If that conflict actually takes place, it causes the reservations made by the "system" driver to fail while before commit b9a5e5e18fbf all reservations made by it and by acpi_reserve_resources() would be successful. In turn, that allows the resources that haven't been reserved by the "system" driver to be used by others (e.g. PCI) which sometimes leads to functional problems (up to and including boot failures). To fix that issue, introduce a common resource reservation routine, acpi_reserve_region(), to be used by both acpi_reserve_resources() and the "system" driver, that will track all resources reserved by it and avoid making conflicting requests. Link: https://bugzilla.kernel.org/show_bug.cgi?id=99831 Link: http://marc.info/?t=143389402600001&r=1&w=2 Fixes: b9a5e5e18fbf "ACPI / init: Fix the ordering of acpi_reserve_resources()" Reported-by: Roland Dreier <roland@purestorage.com> Cc: All applicable <stable@vger.kernel.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-06-15ACPI / scan: Parse _CCA and setup device coherencySuthikulpanit, Suravee1-0/+5
This patch implements support for ACPI _CCA object, which is introduced in ACPIv5.1, can be used for specifying device DMA coherency attribute. The parsing logic traverses device namespace to parse coherency information, and stores it in acpi_device_flags. Then uses it to call arch_setup_dma_ops() when creating each device enumerated in DSDT during ACPI scan. This patch also introduces acpi_dma_is_coherent(), which provides an interface for device drivers to check the coherency information similarly to the of_dma_is_coherent(). Signed-off-by: Mark Salter <msalter@redhat.com> Signed-off-by: Suravee Suthikulpanit <Suravee.Suthikulpanit@amd.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-06-11ACPI / init: Switch over platform to the ACPI mode laterRafael J. Wysocki1-0/+2
Commit 73f7d1ca3263 "ACPI / init: Run acpi_early_init() before timekeeping_init()" moved the ACPI subsystem initialization, including the ACPI mode enabling, to an earlier point in the initialization sequence, to allow the timekeeping subsystem use ACPI early. Unfortunately, that resulted in boot regressions on some systems and the early ACPI initialization was moved toward its original position in the kernel initialization code by commit c4e1acbb35e4 "ACPI / init: Invoke early ACPI initialization later". However, that turns out to be insufficient, as boot is still broken on the Tyan S8812 mainboard. To fix that issue, split the ACPI early initialization code into two pieces so the majority of it still located in acpi_early_init() and the part switching over the platform into the ACPI mode goes into a new function, acpi_subsystem_init(), executed at the original early ACPI initialization spot. That fixes the Tyan S8812 boot problem, but still allows ACPI tables to be loaded earlier which is useful to the EFI code in efi_enter_virtual_mode(). Link: https://bugzilla.kernel.org/show_bug.cgi?id=97141 Fixes: 73f7d1ca3263 "ACPI / init: Run acpi_early_init() before timekeeping_init()" Reported-and-tested-by: Marius Tolzmann <tolzmann@molgen.mpg.de> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Toshi Kani <toshi.kani@hp.com> Reviewed-by: Hanjun Guo <hanjun.guo@linaro.org> Reviewed-by: Lee, Chun-Yi <jlee@suse.com>
2015-05-14ACPI / processor: Introduce invalid_phys_cpuid()Hanjun Guo1-0/+5
Introduce invalid_phys_cpuid() to identify cpu with invalid physical ID, then used it as replacement of the direct comparisons with PHYS_CPUID_INVALID. Signed-off-by: Hanjun Guo <hanjun.guo@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-05-14ACPI / processor: Introduce invalid_logical_cpuid()Hanjun Guo1-0/+5
In ACPI processor drivers, we use direct comparisons of cpu logical id with -1 which are error prone in case logical cpuid is accidentally assinged an error code and prevents us from returning an error-encoding cpuid directly in some cases. So introduce invalid_logical_cpuid() to identify cpu with invalid logical cpu num, then it will be used to replace the direct comparisons with -1. Signed-off-by: Hanjun Guo <hanjun.guo@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-05-11gpio / ACPI: Add support for retrieving GpioInt resources from a deviceMika Westerberg1-0/+7
ACPI specification knows two types of GPIOs: GpioIo and GpioInt. The latter is used to describe that a given device interrupt line is connected to a specific GPIO pin. Typical ACPI _CRS entry for such device looks like below: Name (_CRS, ResourceTemplate () { I2cSerialBus (0x004A, ControllerInitiated, 0x00061A80, AddressingMode7Bit, "\\_SB.PCI0.I2C6", 0x00, ResourceConsumer) GpioIo (Exclusive, PullDefault, 0x0000, 0x0000, IoRestrictionOutputOnly, "\\_SB.GPO0", 0x00, ResourceConsumer) { 0x004B } GpioInt (Level, ActiveLow, Shared, PullDefault, 0x0000, "\\_SB.GPO0", 0x00, ResourceConsumer) { 0x004C } }) Currently drivers need to request a GPIO corresponding to the right GpioInt and then translate that to Linux IRQ number. This adds unnecessary lines of boiler-plate code. We can ease this a bit by introducing acpi_dev_gpio_irq_get() analogous to of_irq_get(). This function translates given GpioInt resource under the device in question to the suitable Linux IRQ number. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-04-24Merge tag 'arm64-upstream' of ↵Linus Torvalds1-1/+7
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull initial ACPI support for arm64 from Will Deacon: "This series introduces preliminary ACPI 5.1 support to the arm64 kernel using the "hardware reduced" profile. We don't support any peripherals yet, so it's fairly limited in scope: - MEMORY init (UEFI) - ACPI discovery (RSDP via UEFI) - CPU init (FADT) - GIC init (MADT) - SMP boot (MADT + PSCI) - ACPI Kconfig options (dependent on EXPERT) ACPI for arm64 has been in development for a while now and hardware has been available that can boot with either FDT or ACPI tables. This has been made possible by both changes to the ACPI spec to cater for ARM-based machines (known as "hardware-reduced" in ACPI parlance) but also a Linaro-driven effort to get this supported on top of the Linux kernel. This pull request is the result of that work. These changes allow us to initialise the CPUs, interrupt controller, and timers via ACPI tables, with memory information and cmdline coming from EFI. We don't support a hybrid ACPI/FDT scheme. Of course, there is still plenty of work to do (a serial console would be nice!) but I expect that to happen on a per-driver basis after this core series has been merged. Anyway, the diff stat here is fairly horrible, but splitting this up and merging it via all the different subsystems would have been extremely painful. Instead, we've got all the relevant Acks in place and I've not seen anything other than trivial (Kconfig) conflicts in -next (for completeness, I've included my resolution below). Nearly half of the insertions fall under Documentation/. So, we'll see how this goes. Right now, it all depends on EXPERT and I fully expect people to use FDT by default for the immediate future" * tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (31 commits) ARM64 / ACPI: make acpi_map_gic_cpu_interface() as void function ARM64 / ACPI: Ignore the return error value of acpi_map_gic_cpu_interface() ARM64 / ACPI: fix usage of acpi_map_gic_cpu_interface ARM64: kernel: acpi: honour acpi=force command line parameter ARM64: kernel: acpi: refactor ACPI tables init and checks ARM64: kernel: psci: let ACPI probe PSCI version ARM64: kernel: psci: factor out probe function ACPI: move arm64 GSI IRQ model to generic GSI IRQ layer ARM64 / ACPI: Don't unflatten device tree if acpi=force is passed ARM64 / ACPI: additions of ACPI documentation for arm64 Documentation: ACPI for ARM64 ARM64 / ACPI: Enable ARM64 in Kconfig XEN / ACPI: Make XEN ACPI depend on X86 ARM64 / ACPI: Select ACPI_REDUCED_HARDWARE_ONLY if ACPI is enabled on ARM64 clocksource / arch_timer: Parse GTDT to initialize arch timer irqchip: Add GICv2 specific ACPI boot support ARM64 / ACPI: Introduce ACPI_IRQ_MODEL_GIC and register device's gsi ACPI / processor: Make it possible to get CPU hardware ID via GICC ACPI / processor: Introduce phys_cpuid_t for CPU hardware ID ARM64 / ACPI: Parse MADT for SMP initialization ...
2015-04-04device property: Make it possible to use secondary firmware nodesRafael J. Wysocki1-2/+2
Add a secondary pointer to struct fwnode_handle so as to make it possible for a device to have two firmware nodes associated with it at the same time, for example, an ACPI node and a node with a set of properties provided by platform initialization code. In the future that will allow device property lookup to fall back from the primary firmware node to the secondary one if the given property is not present there to make it easier to provide defaults for device properties used by device drivers. Introduce two helper routines, set_primary_fwnode() and set_secondary_fwnode() allowing callers to add a primary/secondary firmware node to the given device in such a way that (1) If there's only one firmware node for that device, it will be pointed to by the device's firmware node pointer. (2) If both the primary and secondary firmware nodes are present, the primary one will be pointed to by the device's firmware node pointer, while the secondary one will be pointed to by the primary node's secondary pointer. (3) If one of these nodes is removed (by calling one of the new nelpers with NULL as the second argument), the other one will be preserved. Make ACPI use set_primary_fwnode() for attaching its firmware nodes to devices. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Tested-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-03-26ARM64 / ACPI: Introduce ACPI_IRQ_MODEL_GIC and register device's gsiHanjun Guo1-0/+1
Introduce ACPI_IRQ_MODEL_GIC which is needed for ARM64 as GIC is used, and then register device's gsi with the core IRQ subsystem. acpi_register_gsi() is similar to DT based irq_of_parse_and_map(), since gsi is unique in the system, so use hwirq number directly for the mapping. We are going to implement stacked domains when GICv2m, GICv3, ITS support are added. CC: Marc Zyngier <marc.zyngier@arm.com> Originally-by: Amit Daniel Kachhap <amit.daniel@samsung.com> Tested-by: Suravee Suthikulpanit <Suravee.Suthikulpanit@amd.com> Tested-by: Yijing Wang <wangyijing@huawei.com> Tested-by: Mark Langsdorf <mlangsdo@redhat.com> Tested-by: Jon Masters <jcm@redhat.com> Tested-by: Timur Tabi <timur@codeaurora.org> Tested-by: Robert Richter <rrichter@cavium.com> Acked-by: Robert Richter <rrichter@cavium.com> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Grant Likely <grant.likely@linaro.org> Signed-off-by: Hanjun Guo <hanjun.guo@linaro.org> Signed-off-by: Will Deacon <will.deacon@arm.com>
2015-03-26ACPI / processor: Introduce phys_cpuid_t for CPU hardware IDCatalin Marinas1-1/+6
CPU hardware ID (phys_id) is defined as u32 in structure acpi_processor, but phys_id is used as int in acpi processor driver, so it will lead to some inconsistence for the drivers. Furthermore, to cater for ACPI arch ports that implement 64 bits CPU ids a generic CPU physical id type is required. So introduce typedef u32 phys_cpuid_t in a common file, and introduce a macro PHYS_CPUID_INVALID as (phys_cpuid_t)(-1) if it's not defined by other archs, this will solve the inconsistence in acpi processor driver, and will prepare for the ACPI on ARM64 for the 64 bit CPU hardware ID in the following patch. CC: Rafael J Wysocki <rjw@rjwysocki.net> Suggested-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Grant Likely <grant.likely@linaro.org> Acked-by: Sudeep Holla <sudeep.holla@arm.com> Acked-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> [hj: reworked cpu physid map return codes] Signed-off-by: Hanjun Guo <hanjun.guo@linaro.org> Signed-off-by: Will Deacon <will.deacon@arm.com>
2015-03-17ACPI: Introduce has_acpi_companion()Rafael J. Wysocki1-0/+10
Now that the ACPI companions of devices are represented by pointers to struct fwnode_handle, it is not quite efficient to check whether or not an ACPI companion of a device is present by evaluating the ACPI_COMPANION() macro. For this reason, introduce a special static inline routine for that, has_acpi_companion(), and update the code to use it where applicable. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-03-17driver core / ACPI: Represent ACPI companions using fwnode_handleRafael J. Wysocki1-2/+3
Now that we have struct fwnode_handle, we can use that to point to ACPI companions from struct device objects instead of pointing to struct acpi_device directly. There are two benefits from that. First, the somewhat ugly and hackish struct acpi_dev_node can be dropped and, second, the same struct fwnode_handle pointer can be used in the future to point to other (non-ACPI) firmware device node types. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Grant Likely <grant.likely@linaro.org>
2015-02-05ACPI: Add interfaces to parse IOAPIC ID for IOAPIC hotplugYinghai Lu1-0/+4
We need to parse APIC ID for IOAPIC registration for IOAPIC hotplug. ACPI _MAT method and MADT table are used to figure out IOAPIC ID, just like parsing CPU APIC ID for CPU hotplug. [ tglx: Fixed docbook comment ] Signed-off-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Tony Luck <tony.luck@intel.com> Cc: Joerg Roedel <joro@8bytes.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Rafael J. Wysocki <rjw@rjwysocki.net> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Randy Dunlap <rdunlap@infradead.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Len Brown <lenb@kernel.org> Link: http://lkml.kernel.org/r/1414387308-27148-8-git-send-email-jiang.liu@linux.intel.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-02-05resources: Move struct resource_list_entry from ACPI into resource coreJiang Liu1-11/+1
Currently ACPI, PCI and pnp all implement the same resource list management with different data structure. We need to transfer from one data structure into another when passing resources from one subsystem into another subsystem. So move struct resource_list_entry from ACPI into resource core and rename it as resource_entry, then it could be reused by different subystems and avoid the data structure conversion. Introduce dedicated header file resource_ext.h instead of embedding it into ioport.h to avoid header file inclusion order issues. Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com> Acked-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-02-04ACPI: Introduce helper function acpi_dev_filter_resource_type()Jiang Liu1-0/+8
Introduce helper function acpi_dev_filter_resource_type(), which may be used by acpi_dev_get_resources() to filer out resource based on resource type. Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-02-04ACPI: Add field offset to struct resource_list_entryJiang Liu1-0/+1
Add field offset to struct resource_list_entry to host address space translation offset so it could be used to represent bridge resources. Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-02-04ACPI: Return translation offset when parsing ACPI address space resourcesJiang Liu1-2/+7
Change function acpi_dev_resource_address_space() and acpi_dev_resource_ext_address_space() to return address space translation offset. It's based on a patch from Yinghai Lu <yinghai@kernel.org>. Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-01-06ACPI / processor: Rename acpi_(un)map_lsapic() to acpi_(un)map_cpu()Hanjun Guo1-2/+2
acpi_map_lsapic() will allocate a logical CPU number and map it to physical CPU id (such as APIC id) for the hot-added CPU, it will also do some mapping for NUMA node id and etc, acpi_unmap_lsapic() will do the reverse. We can see that the name of the function is a little bit confusing and arch (IA64) dependent so rename them as acpi_(un)map_cpu() to make arch agnostic and explicit. Signed-off-by: Hanjun Guo <hanjun.guo@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-12-20Merge branch 'x86-apic-for-linus' of ↵Linus Torvalds1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 apic updates from Thomas Gleixner: "After stopping the full x86/apic branch, I took some time to go through the first block of patches again, which are mostly cleanups and preparatory work for the irqdomain conversion and ioapic hotplug support. Unfortunaly one of the real problematic commits was right at the beginning, so I rebased this portion of the pending patches without the offenders. It would be great to get this into 3.19. That makes reworking the problematic parts simpler. The usual tip testing did not unearth any issues and it is fully bisectible now. I'm pretty confident that this wont affect the calmness of the xmas season. Changes: - Split the convoluted io_apic.c code into domain specific parts (vector, ioapic, msi, htirq) - Introduce proper helper functions to retrieve irq specific data instead of open coded dereferencing of pointers - Preparatory work for ioapic hotplug and irqdomain conversion - Removal of the non functional pci-ioapic driver - Removal of unused irq entry stubs - Make native_smp_prepare_cpus() preemtible to avoid GFP_ATOMIC allocations for everything which is called from there. - Small cleanups and fixes" * 'x86-apic-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (36 commits) iommu/amd: Use helpers to access irq_cfg data structure associated with IRQ iommu/vt-d: Use helpers to access irq_cfg data structure associated with IRQ x86: irq_remapping: Use helpers to access irq_cfg data structure associated with IRQ x86, irq: Use helpers to access irq_cfg data structure associated with IRQ x86, irq: Make MSI and HT_IRQ indepenent of X86_IO_APIC x86, irq: Move IRQ initialization routines from io_apic.c into vector.c x86, irq: Move IOAPIC related declarations from hw_irq.h into io_apic.h x86, irq: Move HT IRQ related code from io_apic.c into htirq.c x86, irq: Move PCI MSI related code from io_apic.c into msi.c x86, irq: Replace printk(KERN_LVL) with pr_lvl() utilities x86, irq: Make UP version of irq_complete_move() an inline stub x86, irq: Move local APIC related code from io_apic.c into vector.c x86, irq: Introduce helpers to access struct irq_cfg x86, irq: Protect __clear_irq_vector() with vector_lock x86, irq: Rename local APIC related functions in io_apic.c as apic_xxx() x86, irq: Refine hw_irq.h to prepare for irqdomain support x86, irq: Convert irq_2_pin list to generic list x86, irq: Kill useless parameter 'irq_attr' of IO_APIC_get_PCI_irq_vector() x86, irq, acpi: Get rid of special handling of GSI for ACPI SCI x86, irq: Introduce helper to check whether an IOAPIC has been registered ...
2014-12-16x86, irq: Introduce helper to check whether an IOAPIC has been registeredJiang Liu1-0/+1
Introduce acpi_ioapic_registered() to check whether an IOAPIC has already been registered, it will be used when enabling IOAPIC hotplug. Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com> Acked-by: Pavel Machek <pavel@ucw.cz> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Tony Luck <tony.luck@intel.com> Cc: Joerg Roedel <joro@8bytes.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Rafael J. Wysocki <rjw@rjwysocki.net> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Randy Dunlap <rdunlap@infradead.org> Cc: Yinghai Lu <yinghai@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Len Brown <len.brown@intel.com> Cc: Grant Likely <grant.likely@linaro.org> Cc: Prarit Bhargava <prarit@redhat.com> Link: http://lkml.kernel.org/r/1414387308-27148-18-git-send-email-jiang.liu@linux.intel.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2014-12-08Merge branch 'pm-runtime'Rafael J. Wysocki1-15/+11
* pm-runtime: (25 commits) i2c-omap / PM: Drop CONFIG_PM_RUNTIME from i2c-omap.c dmaengine / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM drivers: sh / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM e1000e / igb / PM: Eliminate CONFIG_PM_RUNTIME MMC / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM MFD / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM misc / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM media / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM input / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM iio / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM hsi / OMAP / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM i2c-hid / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM drm / exynos / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM gpio / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM hwrandom / exynos / PM: Use CONFIG_PM in #ifdef block / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM USB / PM: Drop CONFIG_PM_RUNTIME from the USB core PM: Merge the SET*_RUNTIME_PM_OPS() macros PM / Kconfig: Do not select PM directly from Kconfig files PCI / PM: Drop CONFIG_PM_RUNTIME from the PCI core ...
2014-12-08Merge branches 'acpi-scan', 'acpi-pm', 'acpi-lpss' and 'acpi-processor'Rafael J. Wysocki1-0/+1
* acpi-scan: ACPI: Add _DEP support to fix battery issue on Asus T100TA * acpi-pm: ACPI / sleep: Drain outstanding events after disabling multiple GPEs ACPI / PM: Fixed a typo in a comment * acpi-lpss: dmaengine: dw: enable runtime PM ACPI / LPSS: introduce a 'proxy' device to power on LPSS for DMA ACPI / LPSS: allow to use specific PM domain during ->probe() ACPI / LPSS: add all LPSS devices to the specific power domain * acpi-processor: ACPI / cpuidle: avoid assigning signed errno to acpi_status ACPI / processor: remove unused variabled from acpi_processor_power structure ACPI / processor: Update the comments in processor.h
2014-12-08Merge branches 'acpi-config', 'acpi-osl', 'acpi-utils' and 'acpi-tables'Rafael J. Wysocki1-0/+4
* acpi-config: ACPI / Kconfig: Remove redundant depends on ACPI * acpi-osl: ACPI / OSL: Add IRQ handler flushing support in the OSL. ACPI / osl: speedup grace period in acpi_os_map_cleanup * acpi-utils: ACPI: remove unnecessary sizeof(u8) * acpi-tables: ACPI / table: Always count matched and successfully parsed entries ACPI / table: Add new function to get table entries
2014-12-04ACPI / PM: Drop CONFIG_PM_RUNTIME from the ACPI coreRafael J. Wysocki1-15/+11
After commit b2b49ccbdd54 (PM: Kconfig: Set PM_RUNTIME if PM_SLEEP is selected) PM_RUNTIME is always set if PM is set, so quite a few depend on CONFIG_PM. Replace CONFIG_PM_RUNTIME with CONFIG_PM in the ACPI core code. Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org> Acked-by: Kevin Hilman <khilman@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-11-27ACPI / table: Add new function to get table entriesAshwin Chaugule1-0/+4
The acpi_table_parse() function has a callback that passes a pointer to a table_header. Add a new function which takes this pointer and parses its entries. This eliminates the need to re-traverse all the tables for each call. e.g. as in acpi_table_parse_madt() which is normally called after acpi_table_parse(). Acked-by: Grant Likely <grant.likely@linaro.org> Signed-off-by: Ashwin Chaugule <ashwin.chaugule@linaro.org> Signed-off-by: Tomasz Nowicki <tomasz.nowicki@linaro.org> Signed-off-by: Hanjun Guo <hanjun.guo@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-11-24ACPI: Add _DEP support to fix battery issue on Asus T100TALan Tianyu1-0/+1
ACPI 5.0 introduces _DEP (Operation Region Dependencies) to designate device objects that OSPM should assign a higher priority in start ordering due to future operation region accesses. On Asus T100TA, ACPI battery info are read from a I2C slave device via I2C operation region. Before I2C operation region handler is installed, battery _STA always returns 0. There is a _DEP method of designating start order under battery device node. This patch is to implement _DEP feature to fix battery issue on the Asus T100TA. Introducing acpi_dep_list and adding dep_unmet count in struct acpi_device. During ACPI namespace scan, create struct acpi_dep_data for a valid pair of master (device pointed to by _DEP)/ slave(device with _DEP), record master's and slave's ACPI handle in it and put it into acpi_dep_list. The dep_unmet count will increase by one if there is a device under its _DEP. Driver's probe() should return EPROBE_DEFER when find dep_unmet is larger than 0. When I2C operation region handler is installed, remove all struct acpi_dep_data on the acpi_dep_list whose master is pointed to I2C host controller and decrease slave's dep_unmet. When dep_unmet decreases to 0, all _DEP conditions are met and then do acpi_bus_attach() for the device in order to resolve battery _STA issue on the Asus T100TA. Link: https://bugzilla.kernel.org/show_bug.cgi?id=69011 Tested-by: Jan-Michael Brummer <jan.brummer@tabos.org> Tested-by: Adam Williamson <adamw@happyassassin.net> Tested-by: Michael Shigorin <shigorin@gmail.com> Acked-by: Wolfram Sang <wsa@the-dreams.de> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Lan Tianyu <tianyu.lan@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-11-05ACPI / property: Drop size_prop from acpi_dev_get_property_reference()Rafael J. Wysocki1-2/+2
The size_prop argument of the recently added function acpi_dev_get_property_reference() is not used by the only current caller of that function and is very unlikely to be used at any time going forward. Namely, for a property whose value is a list of items each containing a references to a device object possibly accompanied by some integers, the number of items in the list can always be computed as the number of elements of type ACPI_TYPE_LOCAL_REFERENCE in the property package. Thus it should never be necessary to provide an additional "cells" property with a value equal to the number of items in that list. It also should never be necessary to provide a "cells" property specifying how many integers are supposed to be following each reference. For this reason, drop the size_prop argument from acpi_dev_get_property_reference() and update its caller accordingly. Link: http://marc.info/?l=linux-kernel&m=141511255610556&w=2 Suggested-by: Grant Likely <grant.likely@linaro.org> Acked-by: Grant Likely <grant.likely@linaro.org> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Tested-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-11-04ACPI / GPIO: Driver GPIO mappings for ACPI GPIOsRafael J. Wysocki1-0/+30
Provide a way for device drivers using GPIOs described by ACPI GpioIo resources in _CRS to tell the GPIO subsystem what names (connection IDs) to associate with specific GPIO pins defined in there. To do that, a driver needs to define a mapping table as a NULL-terminated array of struct acpi_gpio_mapping objects that each contain a name, a pointer to an array of line data (struct acpi_gpio_params) objects and the size of that array. Each struct acpi_gpio_params object consists of three fields, crs_entry_index, line_index, active_low, representing the index of the target GpioIo()/GpioInt() resource in _CRS starting from zero, the index of the target line in that resource starting from zero, and the active-low flag for that line, respectively. Next, the mapping table needs to be passed as the second argument to acpi_dev_add_driver_gpios() that will register it with the ACPI device object pointed to by its first argument. That should be done in the driver's .probe() routine. On removal, the driver should unregister its GPIO mapping table by calling acpi_dev_remove_driver_gpios() on the ACPI device object where that table was previously registered. Included are fixes from Mika Westerberg. Acked-by: Alexandre Courbot <acourbot@nvidia.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-11-04Driver core: Unified interface for firmware node propertiesRafael J. Wysocki1-0/+26
Add new generic routines are provided for retrieving properties from device description objects in the platform firmware in case there are no struct device objects for them (either those objects have not been created yet or they do not exist at all). The following functions are provided: fwnode_property_present() fwnode_property_read_u8() fwnode_property_read_u16() fwnode_property_read_u32() fwnode_property_read_u64() fwnode_property_read_string() fwnode_property_read_u8_array() fwnode_property_read_u16_array() fwnode_property_read_u32_array() fwnode_property_read_u64_array() fwnode_property_read_string_array() in analogy with the corresponding functions for struct device added previously. For all of them, the first argument is a pointer to struct fwnode_handle (new type) that allows a device description object (depending on what platform firmware interface is in use) to be obtained. Add a new macro device_for_each_child_node() for iterating over the children of the device description object associated with a given device and a new function device_get_child_node_count() returning the number of a given device's child nodes. The interface covers both ACPI and Device Trees. Suggested-by: Grant Likely <grant.likely@linaro.org> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Grant Likely <grant.likely@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-11-04ACPI: Allow drivers to match using Device Tree compatible propertyMika Westerberg1-6/+2
We have lots of existing Device Tree enabled drivers and allocating separate _HID for each is not feasible. Instead we allocate special _HID "PRP0001" that means that the match should be done using Device Tree compatible property using driver's .of_match_table instead if the driver is missing .acpi_match_table. If there is a need to distinguish from where the device is enumerated (DT/ACPI) driver can check dev->of_node or ACPI_COMPATION(dev). Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Acked-by: Grant Likely <grant.likely@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-11-04Driver core: Unified device properties interface for platform firmwareRafael J. Wysocki1-0/+32
Add a uniform interface by which device drivers can request device properties from the platform firmware by providing a property name and the corresponding data type. The purpose of it is to help to write portable code that won't depend on any particular platform firmware interface. The following general helper functions are added: device_property_present() device_property_read_u8() device_property_read_u16() device_property_read_u32() device_property_read_u64() device_property_read_string() device_property_read_u8_array() device_property_read_u16_array() device_property_read_u32_array() device_property_read_u64_array() device_property_read_string_array() The first one allows the caller to check if the given property is present. The next 5 of them allow single-valued properties of various types to be retrieved in a uniform way. The remaining 5 are for reading properties with multiple values (arrays of either numbers or strings). The interface covers both ACPI and Device Trees. This change set includes material from Mika Westerberg and Aaron Lu. Signed-off-by: Aaron Lu <aaron.lu@intel.com> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Grant Likely <grant.likely@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-11-04ACPI: Add support for device specific propertiesMika Westerberg1-0/+40
Device Tree is used in many embedded systems to describe the system configuration to the OS. It supports attaching properties or name-value pairs to the devices it describe. With these properties one can pass additional information to the drivers that would not be available otherwise. ACPI is another configuration mechanism (among other things) typically seen, but not limited to, x86 machines. ACPI allows passing arbitrary data from methods but there has not been mechanism equivalent to Device Tree until the introduction of _DSD in the recent publication of the ACPI 5.1 specification. In order to facilitate ACPI usage in systems where Device Tree is typically used, it would be beneficial to standardize a way to retrieve Device Tree style properties from ACPI devices, which is what we do in this patch. If a given device described in ACPI namespace wants to export properties it must implement _DSD method (Device Specific Data, introduced with ACPI 5.1) that returns the properties in a package of packages. For example: Name (_DSD, Package () { ToUUID("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"), Package () { Package () {"name1", <VALUE1>}, Package () {"name2", <VALUE2>}, ... } }) The UUID reserved for properties is daffd814-6eba-4d8c-8a91-bc9bbf4aa301 and is documented in the ACPI 5.1 companion document called "_DSD Implementation Guide" [1], [2]. We add several helper functions that can be used to extract these properties and convert them to different Linux data types. The ultimate goal is that we only have one device property API that retrieves the requested properties from Device Tree or from ACPI transparent to the caller. [1] http://www.uefi.org/sites/default/files/resources/_DSD-implementation-guide-toplevel.htm [2] http://www.uefi.org/sites/default/files/resources/_DSD-device-properties-UUID.pdf Reviewed-by: Hanjun Guo <hanjun.guo@linaro.org> Reviewed-by: Josh Triplett <josh@joshtriplett.org> Reviewed-by: Grant Likely <grant.likely@linaro.org> Signed-off-by: Darren Hart <dvhart@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-10-24Merge branch 'next' of ↵Linus Torvalds1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux Pull thermal management updates from Zhang Rui: "Sorry that I missed the merge window as there is a bug found in the last minute, and I have to fix it and wait for the code to be tested in linux-next tree for a few days. Now the buggy patch has been dropped entirely from my next branch. Thus I hope those changes can still be merged in 3.18-rc2 as most of them are platform thermal driver changes. Specifics: - introduce ACPI INT340X thermal drivers. Newer laptops and tablets may have thermal sensors and other devices with thermal control capabilities that are exposed for the OS to use via the ACPI INT340x device objects. Several drivers are introduced to expose the temperature information and cooling ability from these objects to user-space via the normal thermal framework. From: Lu Aaron, Lan Tianyu, Jacob Pan and Zhang Rui. - introduce a new thermal governor, which just uses a hysteresis to switch abruptly on/off a cooling device. This governor can be used to control certain fan devices that can not be throttled but just switched on or off. From: Peter Feuerer. - introduce support for some new thermal interrupt functions on i.MX6SX, in IMX thermal driver. From: Anson, Huang. - introduce tracing support on thermal framework. From: Punit Agrawal. - small fixes in OF thermal and thermal step_wise governor" * 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux: (25 commits) Thermal: int340x thermal: select ACPI fan driver Thermal: int3400_thermal: use acpi_thermal_rel parsing APIs Thermal: int340x_thermal: expose acpi thermal relationship tables Thermal: introduce int3403 thermal driver Thermal: introduce INT3402 thermal driver Thermal: move the KELVIN_TO_MILLICELSIUS macro to thermal.h ACPI / Fan: support INT3404 thermal device ACPI / Fan: add ACPI 4.0 style fan support ACPI / fan: convert to platform driver ACPI / fan: use acpi_device_xxx_power instead of acpi_bus equivelant ACPI / fan: remove no need check for device pointer ACPI / fan: remove unused macro Thermal: int3400 thermal: register to thermal framework Thermal: int3400 thermal: add capability to detect supporting UUIDs Thermal: introduce int3400 thermal driver ACPI: add ACPI_TYPE_LOCAL_REFERENCE support to acpi_extract_package() ACPI: make acpi_create_platform_device() an external API thermal: step_wise: fix: Prevent from binary overflow when trend is dropping ACPI: introduce ACPI int340x thermal scan handler thermal: Added Bang-bang thermal governor ...
2014-10-10ACPI: make acpi_create_platform_device() an external APIZhang Rui1-0/+1
Signed-off-by: Zhang Rui <rui.zhang@intel.com>