summaryrefslogtreecommitdiff
path: root/include/linux/amd-pstate.h
AgeCommit message (Collapse)AuthorFilesLines
2023-03-17cpufreq: amd-pstate: Add guided autonomous modeWyes Karny1-0/+2
From ACPI spec below 3 modes for CPPC can be defined: 1. Non autonomous: OS scaling governor specifies operating frequency/ performance level through `Desired Performance` register and platform follows that. 2. Guided autonomous: OS scaling governor specifies min and max frequencies/ performance levels through `Minimum Performance` and `Maximum Performance` register, and platform can autonomously select an operating frequency in this range. 3. Fully autonomous: OS only hints (via EPP) to platform for the required energy performance preference for the workload and platform autonomously scales the frequency. Currently (1) is supported by amd_pstate as passive mode, and (3) is implemented by EPP support. This change is to support (2). In guided autonomous mode the min_perf is based on the input from the scaling governor. For example, in case of schedutil this value depends on the current utilization. And max_perf is set to max capacity. To activate guided auto mode ``amd_pstate=guided`` command line parameter has to be passed in the kernel. Acked-by: Huang Rui <ray.huang@amd.com> Reviewed-by: Mario Limonciello <mario.limonciello@amd.com> Tested-by: Oleksandr Natalenko <oleksandr@natalenko.name> Signed-off-by: Wyes Karny <wyes.karny@amd.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2023-02-03cpufreq: amd-pstate: implement amd pstate cpu online and offline callbackPerry Yuan1-0/+1
Adds online and offline driver callback support to allow cpu cores go offline and help to restore the previous working states when core goes back online later for EPP driver mode. Acked-by: Huang Rui <ray.huang@amd.com> Reviewed-by: Mario Limonciello <Mario.Limonciello@amd.com> Reviewed-by: Wyes Karny <wyes.karny@amd.com> Tested-by: Wyes Karny <wyes.karny@amd.com> Signed-off-by: Perry Yuan <Perry.Yuan@amd.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2023-02-03cpufreq: amd-pstate: implement Pstate EPP support for the AMD processorsPerry Yuan1-1/+15
Add EPP driver support for AMD SoCs which support a dedicated MSR for CPPC. EPP is used by the DPM controller to configure the frequency that a core operates at during short periods of activity. The SoC EPP targets are configured on a scale from 0 to 255 where 0 represents maximum performance and 255 represents maximum efficiency. The amd-pstate driver exports profile string names to userspace that are tied to specific EPP values. The balance_performance string (0x80) provides the best balance for efficiency versus power on most systems, but users can choose other strings to meet their needs as well. $ cat /sys/devices/system/cpu/cpufreq/policy0/energy_performance_available_preferences default performance balance_performance balance_power power $ cat /sys/devices/system/cpu/cpufreq/policy0/energy_performance_preference balance_performance To enable the driver,it needs to add `amd_pstate=active` to kernel command line and kernel will load the active mode epp driver Acked-by: Huang Rui <ray.huang@amd.com> Reviewed-by: Mario Limonciello <Mario.Limonciello@amd.com> Reviewed-by: Wyes Karny <wyes.karny@amd.com> Tested-by: Wyes Karny <wyes.karny@amd.com> Signed-off-by: Perry Yuan <Perry.Yuan@amd.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2023-02-03cpufreq: amd-pstate: optimize driver working mode selection in ↵Wyes Karny1-0/+17
amd_pstate_param() The amd-pstate driver may support multiple working modes. Introduce a variable to keep track of which mode is currently enabled. Here we use cppc_state var to indicate which mode is enabled. This change will help to simplify the the amd_pstate_param() to choose which mode used for the following driver registration. Acked-by: Huang Rui <ray.huang@amd.com> Reviewed-by: Mario Limonciello <mario.limonciello@amd.com> Tested-by: Wyes Karny <wyes.karny@amd.com> Signed-off-by: Perry Yuan <perry.yuan@amd.com> Signed-off-by: Wyes Karny <wyes.karny@amd.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2022-10-05cpufreq: amd-pstate: Expose struct amd_cpudataMeng Li1-0/+77
Expose struct amd_cpudata to AMD P-State unit test module. This data struct will be used on the following AMD P-State unit test (amd-pstate-ut) module. The amd-pstate-ut module can get some AMD infomations by this data struct. For example: highest perf, nominal perf, boost supported etc. Signed-off-by: Meng Li <li.meng@amd.com> Acked-by: Huang Rui <ray.huang@amd.com> Acked-by: Shuah Khan <skhan@linuxfoundation.org> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>