summaryrefslogtreecommitdiff
path: root/include/linux/bcma
AgeCommit message (Collapse)AuthorFilesLines
2017-11-02License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseGreg Kroah-Hartman9-0/+9
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-05-09scripts/spelling.txt: add regsiter -> register spelling mistakeStephen Boyd1-1/+1
This typo is quite common. Fix it and add it to the spelling file so that checkpatch catches it earlier. Link: http://lkml.kernel.org/r/20170317011131.6881-2-sboyd@codeaurora.org Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-08mtd: bcm47xxsflash: use platform_(set|get)_drvdataRafał Miłecki1-3/+0
We have generic place & helpers for storing platform driver data so there is no reason for using custom priv pointer. This allows cleaning up struct bcma_sflash from unneeded fields. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Acked-by: Kalle Valo <kvalo@codeaurora.org> Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2016-10-05Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-nextLinus Torvalds2-0/+4
Pull networking updates from David Miller: 1) BBR TCP congestion control, from Neal Cardwell, Yuchung Cheng and co. at Google. https://lwn.net/Articles/701165/ 2) Do TCP Small Queues for retransmits, from Eric Dumazet. 3) Support collect_md mode for all IPV4 and IPV6 tunnels, from Alexei Starovoitov. 4) Allow cls_flower to classify packets in ip tunnels, from Amir Vadai. 5) Support DSA tagging in older mv88e6xxx switches, from Andrew Lunn. 6) Support GMAC protocol in iwlwifi mwm, from Ayala Beker. 7) Support ndo_poll_controller in mlx5, from Calvin Owens. 8) Move VRF processing to an output hook and allow l3mdev to be loopback, from David Ahern. 9) Support SOCK_DESTROY for UDP sockets. Also from David Ahern. 10) Congestion control in RXRPC, from David Howells. 11) Support geneve RX offload in ixgbe, from Emil Tantilov. 12) When hitting pressure for new incoming TCP data SKBs, perform a partial rathern than a full purge of the OFO queue (which could be huge). From Eric Dumazet. 13) Convert XFRM state and policy lookups to RCU, from Florian Westphal. 14) Support RX network flow classification to igb, from Gangfeng Huang. 15) Hardware offloading of eBPF in nfp driver, from Jakub Kicinski. 16) New skbmod packet action, from Jamal Hadi Salim. 17) Remove some inefficiencies in snmp proc output, from Jia He. 18) Add FIB notifications to properly propagate route changes to hardware which is doing forwarding offloading. From Jiri Pirko. 19) New dsa driver for qca8xxx chips, from John Crispin. 20) Implement RFC7559 ipv6 router solicitation backoff, from Maciej Żenczykowski. 21) Add L3 mode to ipvlan, from Mahesh Bandewar. 22) Support 802.1ad in mlx4, from Moshe Shemesh. 23) Support hardware LRO in mediatek driver, from Nelson Chang. 24) Add TC offloading to mlx5, from Or Gerlitz. 25) Convert various drivers to ethtool ksettings interfaces, from Philippe Reynes. 26) TX max rate limiting for cxgb4, from Rahul Lakkireddy. 27) NAPI support for ath10k, from Rajkumar Manoharan. 28) Support XDP in mlx5, from Rana Shahout and Saeed Mahameed. 29) UDP replicast support in TIPC, from Richard Alpe. 30) Per-queue statistics for qed driver, from Sudarsana Reddy Kalluru. 31) Support BQL in thunderx driver, from Sunil Goutham. 32) TSO support in alx driver, from Tobias Regnery. 33) Add stream parser engine and use it in kcm. 34) Support async DHCP replies in ipconfig module, from Uwe Kleine-König. 35) DSA port fast aging for mv88e6xxx driver, from Vivien Didelot. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1715 commits) mlxsw: switchx2: Fix misuse of hard_header_len mlxsw: spectrum: Fix misuse of hard_header_len net/faraday: Stop NCSI device on shutdown net/ncsi: Introduce ncsi_stop_dev() net/ncsi: Rework the channel monitoring net/ncsi: Allow to extend NCSI request properties net/ncsi: Rework request index allocation net/ncsi: Don't probe on the reserved channel ID (0x1f) net/ncsi: Introduce NCSI_RESERVED_CHANNEL net/ncsi: Avoid unused-value build warning from ia64-linux-gcc net: Add netdev all_adj_list refcnt propagation to fix panic net: phy: Add Edge-rate driver for Microsemi PHYs. vmxnet3: Wake queue from reset work i40e: avoid NULL pointer dereference and recursive errors on early PCI error qed: Add RoCE ll2 & GSI support qed: Add support for memory registeration verbs qed: Add support for QP verbs qed: PD,PKEY and CQ verb support qed: Add support for RoCE hw init qede: Add qedr framework ...
2016-08-19net: bgmac: support Ethernet core on BCM53573 SoCsRafał Miłecki2-0/+4
BCM53573 is a new series of Broadcom's SoCs. It's based on ARM and can be found in two packages (versions): BCM53573 and BCM47189. It shares some code with the Northstar family, but also requires some new quirks. First of all there can be up to 2 Ethernet cores on this SoC. If that is the case, they are connected to two different switch ports allowing some more complex/optimized setups. It seems the second unit doesn't come fully configured and requires some IRQ quirk. Other than that only the first core is connected to the PHY. For the second one we have to register fixed PHY (similarly to the Northstar), otherwise generic PHY driver would get some invalid info. This has been successfully tested on Tenda AC9 (BCM47189B0). Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-15USB: bcma: support old USB 2.0 controller on Northstar devicesRafał Miłecki1-0/+1
Currently bcma-hcd driver handles 3 different bcma cores: 1) BCMA_CORE_USB20_HOST (0x819) 2) BCMA_CORE_NS_USB20 (0x504) 3) BCMA_CORE_NS_USB30 (0x505) The first one was introduced years ago and so far was used on MIPS devices only. All Northstar (ARM) devices were using other two cores which allowed easy implementation of separated initialization paths. It seems however Broadcom decided to reuse this old USB 2.0 controller on some recently introduced cheaper Northstar BCM53573 SoCs. I noticed this on Tenda AC9 (based on BCM47189B0 belonging to BCM53573 family). There is no difference in this old controller core identification between MIPS and ARM devices: they share the same id and revision. We need different controller initialization procedure however. To handle this add a check for architecture and implement required initialization for ARM case. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-07-25Merge tag 'wireless-drivers-next-for-davem-2016-07-22' of ↵David S. Miller1-0/+3
git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next Kalle Valo says: ==================== pull-request: wireless-drivers-next 2016-07-22 I'm sick so I have to keep this short, but here's the last pull request to net-next. This time there's a trivial conflict with mtd tree: http://lkml.kernel.org/g/20160720123133.44dab209@canb.auug.org.au We concluded with Brian (CCed) that it's best that we ask Linus to fix this. The patches have been in linux-next for a couple of days. This time I haven't done any merge tests so I don't know if there are any other conflicts etc. Please let me know if there are any problems. wireless-drivers-next patches for 4.8 Major changes: wl18xx * add initial mesh support bcma * serial flash support on non-MIPS SoCs ath10k * enable support for QCA9888 * disable wake_tx_queue() mac80211 op for older devices to workaround throughput regression ath9k * implement temperature compensation support for AR9003+ ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-19bcma: define ChipCommon B MII registersRafał Miłecki1-0/+3
We don't have access to datasheets to document all the bits but we can name these registers at least. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-07-10x86/quirks: Add early quirk to reset Apple AirPort cardLukas Wunner1-0/+1
The EFI firmware on Macs contains a full-fledged network stack for downloading OS X images from osrecovery.apple.com. Unfortunately on Macs introduced 2011 and 2012, EFI brings up the Broadcom 4331 wireless card on every boot and leaves it enabled even after ExitBootServices has been called. The card continues to assert its IRQ line, causing spurious interrupts if the IRQ is shared. It also corrupts memory by DMAing received packets, allowing for remote code execution over the air. This only stops when a driver is loaded for the wireless card, which may be never if the driver is not installed or blacklisted. The issue seems to be constrained to the Broadcom 4331. Chris Milsted has verified that the newer Broadcom 4360 built into the MacBookPro11,3 (2013/2014) does not exhibit this behaviour. The chances that Apple will ever supply a firmware fix for the older machines appear to be zero. The solution is to reset the card on boot by writing to a reset bit in its mmio space. This must be done as an early quirk and not as a plain vanilla PCI quirk to successfully combat memory corruption by DMAed packets: Matthew Garrett found out in 2012 that the packets are written to EfiBootServicesData memory (http://mjg59.dreamwidth.org/11235.html). This type of memory is made available to the page allocator by efi_free_boot_services(). Plain vanilla PCI quirks run much later, in subsys initcall level. In-between a time window would be open for memory corruption. Random crashes occurring in this time window and attributed to DMAed packets have indeed been observed in the wild by Chris Bainbridge. When Matthew Garrett analyzed the memory corruption issue in 2012, he sought to fix it with a grub quirk which transitions the card to D3hot: http://git.savannah.gnu.org/cgit/grub.git/commit/?id=9d34bb85da56 This approach does not help users with other bootloaders and while it may prevent DMAed packets, it does not cure the spurious interrupts emanating from the card. Unfortunately the card's mmio space is inaccessible in D3hot, so to reset it, we have to undo the effect of Matthew's grub patch and transition the card back to D0. Note that the quirk takes a few shortcuts to reduce the amount of code: The size of BAR 0 and the location of the PM capability is identical on all affected machines and therefore hardcoded. Only the address of BAR 0 differs between models. Also, it is assumed that the BCMA core currently mapped is the 802.11 core. The EFI driver seems to always take care of this. Michael Büsch, Bjorn Helgaas and Matt Fleming contributed feedback towards finding the best solution to this problem. The following should be a comprehensive list of affected models: iMac13,1 2012 21.5" [Root Port 00:1c.3 = 8086:1e16] iMac13,2 2012 27" [Root Port 00:1c.3 = 8086:1e16] Macmini5,1 2011 i5 2.3 GHz [Root Port 00:1c.1 = 8086:1c12] Macmini5,2 2011 i5 2.5 GHz [Root Port 00:1c.1 = 8086:1c12] Macmini5,3 2011 i7 2.0 GHz [Root Port 00:1c.1 = 8086:1c12] Macmini6,1 2012 i5 2.5 GHz [Root Port 00:1c.1 = 8086:1e12] Macmini6,2 2012 i7 2.3 GHz [Root Port 00:1c.1 = 8086:1e12] MacBookPro8,1 2011 13" [Root Port 00:1c.1 = 8086:1c12] MacBookPro8,2 2011 15" [Root Port 00:1c.1 = 8086:1c12] MacBookPro8,3 2011 17" [Root Port 00:1c.1 = 8086:1c12] MacBookPro9,1 2012 15" [Root Port 00:1c.1 = 8086:1e12] MacBookPro9,2 2012 13" [Root Port 00:1c.1 = 8086:1e12] MacBookPro10,1 2012 15" [Root Port 00:1c.1 = 8086:1e12] MacBookPro10,2 2012 13" [Root Port 00:1c.1 = 8086:1e12] For posterity, spurious interrupts caused by the Broadcom 4331 wireless card resulted in splats like this (stacktrace omitted): irq 17: nobody cared (try booting with the "irqpoll" option) handlers: [<ffffffff81374370>] pcie_isr [<ffffffffc0704550>] sdhci_irq [sdhci] threaded [<ffffffffc07013c0>] sdhci_thread_irq [sdhci] [<ffffffffc0a0b960>] azx_interrupt [snd_hda_codec] Disabling IRQ #17 Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=79301 Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=111781 Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=728916 Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=895951#c16 Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=1009819 Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=1098621 Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=1149632#c5 Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=1279130 Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=1332732 Tested-by: Konstantin Simanov <k.simanov@stlk.ru> # [MacBookPro8,1] Tested-by: Lukas Wunner <lukas@wunner.de> # [MacBookPro9,1] Tested-by: Bryan Paradis <bryan.paradis@gmail.com> # [MacBookPro9,2] Tested-by: Andrew Worsley <amworsley@gmail.com> # [MacBookPro10,1] Tested-by: Chris Bainbridge <chris.bainbridge@gmail.com> # [MacBookPro10,2] Signed-off-by: Lukas Wunner <lukas@wunner.de> Acked-by: Rafał Miłecki <zajec5@gmail.com> Acked-by: Matt Fleming <matt@codeblueprint.co.uk> Cc: Andy Lutomirski <luto@kernel.org> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Chris Milsted <cmilsted@redhat.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Matthew Garrett <mjg59@srcf.ucam.org> Cc: Michael Buesch <m@bues.ch> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Yinghai Lu <yinghai@kernel.org> Cc: b43-dev@lists.infradead.org Cc: linux-pci@vger.kernel.org Cc: linux-wireless@vger.kernel.org Cc: stable@vger.kernel.org Cc: stable@vger.kernel.org # 123456789abc: x86/quirks: Apply nvidia_bugs quirk only on root bus Cc: stable@vger.kernel.org # 123456789abc: x86/quirks: Reintroduce scanning of secondary buses Link: http://lkml.kernel.org/r/48d0972ac82a53d460e5fce77a07b2560db95203.1465690253.git.lukas@wunner.de [ Did minor readability edits. ] Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-05-24Merge tag 'for-linus-20160523' of git://git.infradead.org/linux-mtdLinus Torvalds1-1/+0
Pull MTD updates from Brian Norris: "First cycle with Boris as NAND maintainer! Many (most) bullets stolen from him. Generic: - Migrated NAND LED trigger to be a generic MTD trigger NAND: - Introduction of the "ECC algorithm" concept, to avoid overloading the ECC mode field too much more - Replaced the nand_ecclayout infrastructure with something a little more flexible (finally!) and future proof - Rework of the OMAP GPMC and NAND drivers; the TI folks pulled some of this into their own tree as well - Prepare the sunxi NAND driver to receive DMA support - Handle bitflips in erased pages on GPMI revisions that do not support this in hardware. SPI NOR: - Start using the spi_flash_read() API for SPI drivers that support it (i.e., SPI drivers with special memory-mapped flash modes) And other small scattered improvments" * tag 'for-linus-20160523' of git://git.infradead.org/linux-mtd: (155 commits) mtd: spi-nor: support GigaDevice gd25lq64c mtd: nand_bch: fix spelling of "probably" mtd: brcmnand: respect ECC algorithm set by NAND subsystem gpmi-nand: Handle ECC Errors in erased pages Documentation: devicetree: deprecate "soft_bch" nand-ecc-mode value mtd: nand: add support for "nand-ecc-algo" DT property mtd: mtd: drop NAND_ECC_SOFT_BCH enum value mtd: drop support for NAND_ECC_SOFT_BCH as "soft_bch" mapping mtd: nand: read ECC algorithm from the new field mtd: nand: fsmc: validate ECC setup by checking algorithm directly mtd: nand: set ECC algorithm to Hamming on fallback staging: mt29f_spinand: set ECC algorithm explicitly CRIS v32: nand: set ECC algorithm explicitly mtd: nand: atmel: set ECC algorithm explicitly mtd: nand: davinci: set ECC algorithm explicitly mtd: nand: bf5xx: set ECC algorithm explicitly mtd: nand: omap2: Fix high memory dma prefetch transfer mtd: nand: omap2: Start dma request before enabling prefetch mtd: nandsim: add __init attribute mtd: nand: move of_get_nand_xxx() helpers into nand_base.c ...
2016-04-30phy: bcm-ns-usb2: new driver for USB 2.0 PHY on NorthstarRafał Miłecki2-0/+16
Northstar is a family of SoCs used in home routers. They have USB 2.0 and 3.0 controllers with PHYs that need to be properly initialized. This driver provides PHY init support in a generic way and can be bound with an EHCI controller driver. There are (just a few) registers being defined in bcma header. It's because DMU/CRU registers will be also needed in other drivers. We will need them e.g. in PCIe controller/PHY driver and at some point probably in clock driver for BCM53573 chipset. By using include/linux/bcma/ we avoid code duplication. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2016-04-04mtd: bcm47xxsflash: use ioremap_cache() instead of KSEG0ADDR()Brian Norris1-1/+0
Using KSEG0ADDR makes code highly MIPS dependent and not portable. Thanks to the fix a68f376 ("MIPS: io.h: Define `ioremap_cache'") we can use ioremap_cache which is generic and supported on MIPS as well now. KSEG0ADDR was translating 0x1c000000 into 0x9c000000. With ioremap_cache we use MIPS's __ioremap (and then remap_area_pages). This results in different address (e.g. 0xc0080000) but it still should be cached as expected and it was successfully tested with BCM47186B0. Other than that drivers/bcma/driver_chipcommon_sflash.c nicely setups a struct resource for access window, but we wren't using it. Use it now and drop duplicated info. Signed-off-by: Brian Norris <computersforpeace@gmail.com> Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
2016-03-07bcma: move parallel flash support to separated fileRafał Miłecki1-2/+6
This follows the way of handling other flashes and cleans code a bit. As next task we will want to move flash code to ChipCommon driver as: 1) Flash controllers are accesible using ChipCommon registers 2) This code isn't MIPS specific This change prepares bcma for that. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-03-07bcma: drop unneeded fields from bcma_pflash structRafał Miłecki1-3/+0
Most of info stored in this struct wasn't really used anywhere as we put all that data in platform data & resource as well. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-02-06bcma: add support for BCM47094Rafał Miłecki1-0/+1
It's another SoC with 32 GPIOs and simplified watchdog handling. It was tested on D-Link DIR-885L. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-02-06bcma: support PMU present as separated bus coreRafał Miłecki1-0/+19
On recent Broadcom chipsets PMU is present as separated core and it can't be accessed using ChipCommon anymore as it fails with e.g.: [ 0.000577] Unhandled fault: external abort on non-linefetch (0x1008) at 0xf1000604 Solve it by using a new (PMU) core pointer set to ChipCommon or PMU depending on the hardware capabilities. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-02-06bcma: use _PMU_ in all names of PMU registersRafał Miłecki1-6/+6
PMU (Power Management Unit) seems to be a separated piece of hardware, just accessed using ChipCommon core registers. In recent Broadcom chipsets PMU is not bounded to CC but available as separated core. To make code cleaner & easier to review (for a correct R/W access) use clearer names. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-02-06bcma: identify bus cores (devices) found on BCM47189Rafał Miłecki1-0/+2
Add missing defines and print proper names. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-12-14mtd: bcm47xxnflash: really unregister NAND on device removalBrian Norris1-4/+2
The field bcma_nflash::mtd is never set to be non-zero anywhere, but we test for it in the removal path. So the MTD is never unregistered. Also, we should use nand_release(), not mtd_device_unregister(). Finally, we don't need to use the 'platdata' for stashing/retrieving our *driver* data -- that's what *_{get,set}_drvdata() are for. So, kill off bcm_nflash::mtd, and stash the struct bcm47xxnflash in drvdata instead. Also move the forward declaration of mtd_info up a bit, since struct bcma_sflash should be using it. Caught while inspecting other changes being made to this driver. Compile tested only. Signed-off-by: Brian Norris <computersforpeace@gmail.com> Cc: "Rafał Miłecki" <zajec5@gmail.com> Cc: linux-wireless@vger.kernel.org Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com>
2015-09-29brcmfmac: Add support for the BCM4365 and BCM4366 PCIE devices.Hante Meuleman1-0/+2
This patch adds support for the BCM4365 and BCM4366 11ac Wave2 PCIE devices. Reviewed-by: Arend Van Spriel <arend@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Hante Meuleman <meuleman@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-08-18bcma: switch GPIO portions to use GPIOLIB_IRQCHIPLinus Walleij1-1/+0
This switches the BCMA GPIO driver to use GPIOLIB_IRQCHIP to handle its interrupts instead of rolling its own copy of the irqdomain handling etc. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-06-08bcma: make calls to PCI hostmode functions config-safeRafał Miłecki1-0/+11
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-05-26bcma: add module_bcma_driver()Hauke Mehrtens1-0/+9
This makes it possible to save some lines of code in drivers with an simple bcma driver registration. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-03-13bcma: allow disabling (not building) PCI driverRafał Miłecki1-0/+6
It isn't required for bcma bus on SoCs, so provide some empty functions and allow disabling it. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-03-13bcma: move PCI IRQ control function to host specific codeRafał Miłecki2-2/+9
This function isn't really related to any bus core. It touches PCI device config registers only, so move it to the (PCI) host file. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-03-05bcma: move internal function declarations to private headerRafał Miłecki5-36/+0
These functions are not exported nor used anywhere, so there is no reason to put them in public headers. Also drop unused bcma_chipco_(suspend|resume). Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-03-05bcma: make bcma_host_pci_(up|down) calls safe for every configRafał Miłecki1-0/+9
We were providing declarations but actual code was compiled only with CONFIG_BCMA_HOST_PCI set. This could result in: ERROR: "bcma_host_pci_down" [drivers/net/wireless/brcm80211/brcmsmac/brcmsmac.ko] undefined! ERROR: "bcma_host_pci_up" [drivers/net/wireless/brcm80211/brcmsmac/brcmsmac.ko] undefined! ERROR: "bcma_host_pci_down" [drivers/net/wireless/b43/b43.ko] undefined! ERROR: "bcma_host_pci_up" [drivers/net/wireless/b43/b43.ko] undefined! Reported-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-03-02bcma: support bringing up bus hosted on PCIe Gen 2Rafał Miłecki1-0/+2
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-03-02bcma: change IRQ control function to accept bus as an argumentRafał Miłecki1-1/+1
It doesn't operate on PCI core, but PCI host device, so there is no point of passing core related struct. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-03-02bcma: add helpers bringing PCIe hosted bus up / downRafał Miłecki2-2/+3
Bringing PCIe hosted bus up requires operating on host-related core. Since we plan to support PCIe Gen 2 devices we should provide a helper picking the correct one (PCIE or PCIE2). Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-01-29bcma: implement host code support for PCIe Gen 2 devicesRafał Miłecki2-0/+3
This is stil incomplete, so we don't add PCI IDs of new devices yet. Purpose of this patch is to allow testing & adjusting rest of the code. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-01-29bcma: add early_init function for PCIe core and move some fix into itRafał Miłecki1-0/+2
There are some PCIe core fixes that need to be applied before accessing SPROM, otherwise reading it may fail. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-01-23bcma: use standard bus scanning during early registerRafał Miłecki1-2/+0
Starting with kernel 3.19-rc1 early registration of bcma on MIPS is done a bit later, with memory allocator available. This allows us to simplify code by using standard bus scanning method. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2014-11-12bcma: make it possible to specify a IRQ num in bcma_core_irq()Hauke Mehrtens2-2/+4
This moves bcma_core_irq() to main.c and add a extra parameter with a number so that we can return different irq number for devices with more than one. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-09-30bcma: register bcma as device tree driverHauke Mehrtens1-0/+2
This driver is used by the bcm53xx ARM SoC code. Now it is possible to give the address of the chipcommon core in device tree and bcma will search for all the other cores. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-09-09bcma: add support for chipcommon B coreHauke Mehrtens2-0/+9
This core is used on BCM4708 to configure the PCIe and USB3 PHYs and it contains the addresses to the Device Management unit. This will be used by the PCIe driver first. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-09-09bcma: store more alternative addressesHauke Mehrtens1-1/+1
Each core could have more than one alternative address. There are cores with 8 alternative addresses for different functions. The PHY control in the Chip common B core is done through the 2. alternative address and not the first one. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> CC: linux-usb@vger.kernel.org Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-09-09bcma: use separated function to initialize bus on SoCRafał Miłecki1-0/+1
This is required to split SoC bus init into two phases. The later one (which includes scanning) should be called when kalloc is available. Cc: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Acked-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-09-09bcma: move bus struct setup into early part of host specific codeRafał Miłecki1-1/+0
This change is important for SoC host. In future we will want to know chip ID (needed for early MIPS boot) before doing cores scanning. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Acked-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-09-04bcma: get info about flash type SoC booted fromRafał Miłecki1-0/+5
There is an ongoing work on cleaning MIPS's nvram support so it could be re-used on other platforms (bcm53xx to say precisely). This will require a bit of extra logic in bcma this patch implements. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-07-31bcma: use NS prefix for names of Northstar specific coresRafał Miłecki1-11/+11
It's cleaner and we don't have quite identical names like BCMA_CORE_PCIEG2 and BCMA_CORE_PCIE2. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-07-29b43: add support for BCM43131 chipset with N-PHY rev 17Rafał Miłecki1-0/+1
It contains radio 0x2057 rev 14 just like a BCM43217, so it doesn't require any magic. The main difference is that BCM4313 is 1x1:1. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-07-18b43: use one shared function for setting MAC frequencyRafał Miłecki1-0/+1
By the way add few chipsets that were tracked with "wl" dumps. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-07-18bcma: add support for BCM43217 found in Tenda W322E (14e4:43a9)Rafał Miłecki1-0/+1
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-07-08bcma: add driver for PCIe Gen 2 coreRafał Miłecki2-0/+160
New Broadcom PCIe devices (802.11ac ones?) use Gen2 and have to be initialized differently. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-01-31Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linusLinus Torvalds1-0/+1
Pull MIPS updates from Ralf Baechle: "The most notable new addition inside this pull request is the support for MIPS's latest and greatest core called "inter/proAptiv". The patch series describes this core as follows. "The interAptiv is a power-efficient multi-core microprocessor for use in system-on-chip (SoC) applications. The interAptiv combines a multi-threading pipeline with a coherence manager to deliver improved computational throughput and power efficiency. The interAptiv can contain one to four MIPS32R3 interAptiv cores, system level coherence manager with L2 cache, optional coherent I/O port, and optional floating point unit." The platform specific patches touch all 3 Broadcom families. It adds support for the new Broadcom/Netlogix XLP9xx Soc, building a common BCM63XX SMP kernel for all BCM63XX SoCs regardless of core type/count and full gpio button/led descriptions for BCM47xx. The rest of the series are cleanups and bug fixes that are MIPS generic and consist largely of changes that Imgtec/MIPS had published in their linux-mti-3.10.git stable tree. Random other cleanups and patches preparing code to be merged in 3.15" * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (139 commits) mips: select ARCH_MIGHT_HAVE_PC_SERIO mips: delete non-required instances of include <linux/init.h> MIPS: KVM: remove shadow_tlb code MIPS: KVM: use common EHINV aware UNIQUE_ENTRYHI mips/ide: flush dcache also if icache does not snoop dcache MIPS: BCM47XX: fix position of cpu_wait disabling MIPS: BCM63XX: select correct MIPS_L1_CACHE_SHIFT value MIPS: update MIPS_L1_CACHE_SHIFT based on MIPS_L1_CACHE_SHIFT_<N> MIPS: introduce MIPS_L1_CACHE_SHIFT_<N> MIPS: ZBOOT: gather string functions into string.c arch/mips/pci: don't check resource with devm_ioremap_resource arch/mips/lantiq/xway: don't check resource with devm_ioremap_resource bcma: gpio: don't cast u32 to unsigned long ssb: gpio: add own IRQ domain MIPS: BCM47XX: fix sparse warnings in board.c MIPS: BCM47XX: add board detection for Linksys WRT54GS V1 MIPS: BCM47XX: fix detection for some boards MIPS: BCM47XX: Enable buttons support on SSB MIPS: BCM47XX: Convert WNDR4500 to new syntax MIPS: BCM47XX: Use "timer" trigger for status LEDs ...
2014-01-23bcma: gpio: add own IRQ domainRafał Miłecki1-0/+1
Input GPIO changes can generate interrupts, but we need kind of ACK for them by changing IRQ polarity. This is required to stop hardware from keep generating interrupts and generate another one on the next GPIO state change. This code allows using GPIOs with standard interrupts and add for example GPIO buttons support. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Acked-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: John Crispin <blogic@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/6216/
2014-01-05bcma: export bcma_find_core_unit()Hauke Mehrtens1-1/+8
This function is used to get a specific core when there is more than one core of that specific type. This is used in bgmac to reset all GMAC cores. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Acked-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-26bcma: make bcma_core_pci_{up,down}() callable from atomic contextArend van Spriel1-0/+1
This patch removes the bcma_core_pci_power_save() call from the bcma_core_pci_{up,down}() functions as it tries to schedule thus requiring to call them from non-atomic context. The function bcma_core_pci_power_save() is now exported so the calling module can explicitly use it in non-atomic context. This fixes the 'scheduling while atomic' issue reported by Tod Jackson and Joe Perches. [ 13.210710] BUG: scheduling while atomic: dhcpcd/1800/0x00000202 [ 13.210718] Modules linked in: brcmsmac nouveau coretemp kvm_intel kvm cordic brcmutil bcma dell_wmi atl1c ttm mxm_wmi wmi [ 13.210756] CPU: 2 PID: 1800 Comm: dhcpcd Not tainted 3.11.0-wl #1 [ 13.210762] Hardware name: Alienware M11x R2/M11x R2, BIOS A04 11/23/2010 [ 13.210767] ffff880177c92c40 ffff880170fd1948 ffffffff8169af5b 0000000000000007 [ 13.210777] ffff880170fd1ab0 ffff880170fd1958 ffffffff81697ee2 ffff880170fd19d8 [ 13.210785] ffffffff816a19f5 00000000000f4240 000000000000d080 ffff880170fd1fd8 [ 13.210794] Call Trace: [ 13.210813] [<ffffffff8169af5b>] dump_stack+0x4f/0x84 [ 13.210826] [<ffffffff81697ee2>] __schedule_bug+0x43/0x51 [ 13.210837] [<ffffffff816a19f5>] __schedule+0x6e5/0x810 [ 13.210845] [<ffffffff816a1c34>] schedule+0x24/0x70 [ 13.210855] [<ffffffff816a04fc>] schedule_hrtimeout_range_clock+0x10c/0x150 [ 13.210867] [<ffffffff810684e0>] ? update_rmtp+0x60/0x60 [ 13.210877] [<ffffffff8106915f>] ? hrtimer_start_range_ns+0xf/0x20 [ 13.210887] [<ffffffff816a054e>] schedule_hrtimeout_range+0xe/0x10 [ 13.210897] [<ffffffff8104f6fb>] usleep_range+0x3b/0x40 [ 13.210910] [<ffffffffa00371af>] bcma_pcie_mdio_set_phy.isra.3+0x4f/0x80 [bcma] [ 13.210921] [<ffffffffa003729f>] bcma_pcie_mdio_write.isra.4+0xbf/0xd0 [bcma] [ 13.210932] [<ffffffffa0037498>] bcma_pcie_mdio_writeread.isra.6.constprop.13+0x18/0x30 [bcma] [ 13.210942] [<ffffffffa00374ee>] bcma_core_pci_power_save+0x3e/0x80 [bcma] [ 13.210953] [<ffffffffa003765d>] bcma_core_pci_up+0x2d/0x60 [bcma] [ 13.210975] [<ffffffffa03dc17c>] brcms_c_up+0xfc/0x430 [brcmsmac] [ 13.210989] [<ffffffffa03d1a7d>] brcms_up+0x1d/0x20 [brcmsmac] [ 13.211003] [<ffffffffa03d2498>] brcms_ops_start+0x298/0x340 [brcmsmac] [ 13.211020] [<ffffffff81600a12>] ? cfg80211_netdev_notifier_call+0xd2/0x5f0 [ 13.211030] [<ffffffff815fa53d>] ? packet_notifier+0xad/0x1d0 [ 13.211064] [<ffffffff81656e75>] ieee80211_do_open+0x325/0xf80 [ 13.211076] [<ffffffff8106ac09>] ? __raw_notifier_call_chain+0x9/0x10 [ 13.211086] [<ffffffff81657b41>] ieee80211_open+0x71/0x80 [ 13.211101] [<ffffffff81526267>] __dev_open+0x87/0xe0 [ 13.211109] [<ffffffff8152650c>] __dev_change_flags+0x9c/0x180 [ 13.211117] [<ffffffff815266a3>] dev_change_flags+0x23/0x70 [ 13.211127] [<ffffffff8158cd68>] devinet_ioctl+0x5b8/0x6a0 [ 13.211136] [<ffffffff8158d5c5>] inet_ioctl+0x75/0x90 [ 13.211147] [<ffffffff8150b38b>] sock_do_ioctl+0x2b/0x70 [ 13.211155] [<ffffffff8150b681>] sock_ioctl+0x71/0x2a0 [ 13.211169] [<ffffffff8114ed47>] do_vfs_ioctl+0x87/0x520 [ 13.211180] [<ffffffff8113f159>] ? ____fput+0x9/0x10 [ 13.211198] [<ffffffff8106228c>] ? task_work_run+0x9c/0xd0 [ 13.211202] [<ffffffff8114f271>] SyS_ioctl+0x91/0xb0 [ 13.211208] [<ffffffff816aa252>] system_call_fastpath+0x16/0x1b [ 13.211217] NOHZ: local_softirq_pending 202 The issue was introduced in v3.11 kernel by following commit: commit aa51e598d04c6acf5477934cd6383f5a17ce9029 Author: Hauke Mehrtens <hauke@hauke-m.de> Date: Sat Aug 24 00:32:31 2013 +0200 brcmsmac: use bcma PCIe up and down functions replace the calls to bcma_core_pci_extend_L1timer() by calls to the newly introduced bcma_core_pci_ip() and bcma_core_pci_down() Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Cc: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> This fix has been discussed with Hauke Mehrtens [1] selection option 3) and is intended for v3.12. Ref: [1] http://mid.gmane.org/5239B12D.3040206@hauke-m.de Cc: <stable@vger.kernel.org> # 3.11.x Cc: Tod Jackson <tod.jackson@gmail.com> Cc: Joe Perches <joe@perches.com> Cc: Rafal Milecki <zajec5@gmail.com> Cc: Hauke Mehrtens <hauke@hauke-m.de> Reviewed-by: Hante Meuleman <meuleman@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-08-26bcma: add bcma_core_pci_power_save()Hauke Mehrtens1-0/+20
This enables or disables power saving on the PCIe bus when the wifi is in operation or not. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>