summaryrefslogtreecommitdiff
path: root/include/linux/console_struct.h
AgeCommit message (Collapse)AuthorFilesLines
2021-05-13vt: Fix character height handling with VT_RESIZEXMaciej W. Rozycki1-0/+1
Restore the original intent of the VT_RESIZEX ioctl's `v_clin' parameter which is the number of pixel rows per character (cell) rather than the height of the font used. For framebuffer devices the two values are always the same, because the former is inferred from the latter one. For VGA used as a true text mode device these two parameters are independent from each other: the number of pixel rows per character is set in the CRT controller, while font height is in fact hardwired to 32 pixel rows and fonts of heights below that value are handled by padding their data with blanks when loaded to hardware for use by the character generator. One can change the setting in the CRT controller and it will update the screen contents accordingly regardless of the font loaded. The `v_clin' parameter is used by the `vgacon' driver to set the height of the character cell and then the cursor position within. Make the parameter explicit then, by defining a new `vc_cell_height' struct member of `vc_data', set it instead of `vc_font.height' from `v_clin' in the VT_RESIZEX ioctl, and then use it throughout the `vgacon' driver except where actual font data is accessed which as noted above is independent from the CRTC setting. This way the framebuffer console driver is free to ignore the `v_clin' parameter as irrelevant, as it always should have, avoiding any issues attempts to give the parameter a meaning there could have caused, such as one that has led to commit 988d0763361b ("vt_ioctl: make VT_RESIZEX behave like VT_RESIZE"): "syzbot is reporting UAF/OOB read at bit_putcs()/soft_cursor() [1][2], for vt_resizex() from ioctl(VT_RESIZEX) allows setting font height larger than actual font height calculated by con_font_set() from ioctl(PIO_FONT). Since fbcon_set_font() from con_font_set() allocates minimal amount of memory based on actual font height calculated by con_font_set(), use of vt_resizex() can cause UAF/OOB read for font data." The problem first appeared around Linux 2.5.66 which predates our repo history, but the origin could be identified with the old MIPS/Linux repo also at: <git://git.kernel.org/pub/scm/linux/kernel/git/ralf/linux.git> as commit 9736a3546de7 ("Merge with Linux 2.5.66."), where VT_RESIZEX code in `vt_ioctl' was updated as follows: if (clin) - video_font_height = clin; + vc->vc_font.height = clin; making the parameter apply to framebuffer devices as well, perhaps due to the use of "font" in the name of the original `video_font_height' variable. Use "cell" in the new struct member then to avoid ambiguity. References: [1] https://syzkaller.appspot.com/bug?id=32577e96d88447ded2d3b76d71254fb855245837 [2] https://syzkaller.appspot.com/bug?id=6b8355d27b2b94fb5cedf4655e3a59162d9e48e3 Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk> Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Cc: stable@vger.kernel.org # v2.6.12+ Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-24vt: redefine world of cursor macrosJiri Slaby1-11/+17
The cursor code used to use magic constants, ANDs, ORs, and some macros. Redefine all this to make some sense. In particular: * Drop CUR_DEFAULT, which is CUR_UNDERLINE. CUR_DEFAULT was used only for cur_default variable initialization, so use CUR_UNDERLINE there to make obvious what's the default. * Drop CUR_HWMASK. Instead, define CUR_SIZE() which explains it more. And use it all over the places. * Define few more masks and bits which will be used in next patches instead of magic constants. * Define CUR_MAKE to build up cursor value. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Cc: dri-devel@lists.freedesktop.org Cc: linux-fbdev@vger.kernel.org Link: https://lore.kernel.org/r/20200615074910.19267-25-jslaby@suse.cz Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-06-24vt: remove 25 years stale commentJiri Slaby1-2/+1
vc_cons was made global (non-static) in 1.3.38, almost 25 years ago. Remove a comment which says that it would be a disadvantage to do so :P. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Link: https://lore.kernel.org/r/20200615074910.19267-7-jslaby@suse.cz Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-06-24vt: convert vc_tab_stop to bitmapJiri Slaby1-1/+2
vc_tab_stop is used as a bitmap, but defined as an unsigned int array. Switch it to bitmap and convert all users to the bitmap interface. Note the difference in behavior! We no longer mask the top 24 bits away from x, hence we do not wrap tabs at 256th column. Instead, we silently drop attempts to set a tab behind 256 columns. And we will also seek by '\t' to the rightmost column, when behind that boundary. I do not think the original behavior was desired and that someone relies on that. If this turns out to be the case, we can change the added 'if's back to masks here and there instead... (Or we can increase the limit as fb consoles now have 240 chars here. And they could have more with higher than my resolution, of course.) Signed-off-by: Jiri Slaby <jslaby@suse.cz> Link: https://lore.kernel.org/r/20200615074910.19267-6-jslaby@suse.cz Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-06-24vt: switch G0/1_charset to an arrayJiri Slaby1-4/+2
Declare Gx_charset[2] instead of G0_charset and G1_charset. It makes the code simpler (without ternary operators). Signed-off-by: Jiri Slaby <jslaby@suse.cz> Link: https://lore.kernel.org/r/20200615074910.19267-5-jslaby@suse.cz Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-06-24vc: switch state to boolJiri Slaby1-4/+4
The code currently uses bitfields to store true-false values. Switch all of that to bools. Apart from the cleanup, it saves 20B of code as many shifts, ANDs, and ORs became simple movzb's. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Link: https://lore.kernel.org/r/20200615074910.19267-3-jslaby@suse.cz Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-06-24vt: introduce enum vc_intensity for intensityJiri Slaby1-2/+9
Introduce names (en enum) for 0, 1, and 2 constants. We now have VCI_HALF_BRIGHT, VCI_NORMAL, and VCI_BOLD instead. Apart from the cleanup, 1) the enum allows for better type checking, and 2) this saves some code. No more fiddling with bits is needed in assembly now. (OTOH, the structure is larger.) Signed-off-by: Jiri Slaby <jslaby@suse.cz> Link: https://lore.kernel.org/r/20200615074910.19267-2-jslaby@suse.cz Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-06-24vc: separate stateJiri Slaby1-21/+33
There are two copies of some members of struct vc_data. This is because we need to save them and restore later. Move these memebers to a separate structure called vc_state. So now instead of members like: vc_x, vc_y and vc_saved_x, vc_saved_y we have state and saved_state (of type: struct vc_state) containing state.x, state.y and saved_state.x, saved_state.y This change: * makes clear what is saved & restored * eases save & restore by using memcpy (see save_cur and restore_cur) Finally, we document the newly added struct vc_state using kernel-doc. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Link: https://lore.kernel.org/r/20200615074910.19267-1-jslaby@suse.cz Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-12vt: More locking checksDaniel Vetter1-4/+1
I honestly have no idea what the subtle differences between con_is_visible, con_is_fg (internal to vt.c) and con_is_bound are. But it looks like both vc->vc_display_fg and con_driver_map are protected by the console_lock, so probably better if we hold that when checking this. To do that I had to deinline the con_is_visible function. Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Nicolas Pitre <nicolas.pitre@linaro.org> Cc: Martin Hostettler <textshell@uchuujin.de> Cc: Adam Borowski <kilobyte@angband.pl> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Mikulas Patocka <mpatocka@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190528090304.9388-5-daniel.vetter@ffwll.ch
2019-01-18vt: refactor vc_ques to allow of other private sequences.Martin Hostettler1-1/+1
The vc_ques keeps track if a csi sequence is a private DEC control function beginning with '?'. Nowadays some private control functions begin with '>' and '='. Switch the code to instead use a new 3-bit vc_priv that allows for all private use parameter prefixes. Signed-off-by: Martin Hostettler <textshell@uchuujin.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-11vt: Remove vc_panic_force_writeDaniel Vetter1-1/+0
It was only used by the panic support in fbcon, which is now gone. Remove this now dead code too. Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Kees Cook <keescook@chromium.org> Cc: Joe Perches <joe@perches.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Meng Xu <mengxu.gatech@gmail.com> Cc: Nicolas Pitre <nicolas.pitre@linaro.org> Cc: Thomas Meyer <thomas@m3y3r.de> Cc: Mike Frysinger <vapier@chromium.org> Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Cc: Hans de Goede <hdegoede@redhat.com> Cc: Thierry Reding <treding@nvidia.com> Cc: David Lechner <david@lechnology.com> Cc: Philippe Ombredanne <pombredanne@nexb.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Kate Stewart <kstewart@linuxfoundation.org> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180822085405.10787-2-daniel.vetter@ffwll.ch
2018-07-21vt: drop unused struct vt_structAdam Borowski1-2/+1
Hasn't been ever used within historic (ie, git) times. Signed-off-by: Adam Borowski <kilobyte@angband.pl> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-06-28vt: preserve unicode values corresponding to screen charactersNicolas Pitre1-0/+2
The vt code translates UTF-8 strings into glyph index values and stores those glyph values directly in the screen buffer. Because there can only be at most 512 glyphs, it is impossible to represent most unicode characters, in which case a default glyph (often '?') is displayed instead. The original unicode value is then lost. This patch implements the basic screen buffer handling to preserve unicode values alongside corresponding display glyphs. It is not activated by default, meaning that people not relying on that functionality won't get the implied overhead. Signed-off-by: Nicolas Pitre <nico@linaro.org> Tested-by: Dave Mielke <Dave@mielke.cc> Acked-by: Adam Borowski <kilobyte@angband.pl> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-02License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseGreg Kroah-Hartman1-0/+1
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-06-25tty: vt, remove unused vc_deccolmJiri Slaby1-1/+0
vc_deccolm is only set and never read, remove the member from vc_data. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-06-25tty: vt, convert more macros to functionsJiri Slaby1-1/+4
Namely convert: * IS_FG -> con_is_fg * DO_UPDATE -> con_should_update * CON_IS_VISIBLE -> con_is_visible DO_UPDATE was a weird name for a yes/no answer, so the new name is con_should_update. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Cc: Thomas Winischhofer <thomas@winischhofer.net> Cc: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com> Cc: linux-usb@vger.kernel.org Cc: linux-fbdev@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-06-25vt: document vc_data by exampleJiri Slaby1-0/+32
All those members of vc_data are each explained in short. But it needs an example for one to understand the whole picture. So add an ascii art depicting the most important vc_data members. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-05-10vt: add cursor blink interval escape sequenceScot Doyle1-0/+1
Add an escape sequence to specify the current console's cursor blink interval. The interval is specified as a number of milliseconds until the next cursor display state toggle, from 50 to 65535. /proc/loadavg did not show a difference with a one msec interval, but the lower bound is set to 50 msecs since slower hardware wasn't tested. Store the interval in the vc_data structure for later access by fbcon, initializing the value to fbcon's current hardcoded value of 200 msecs. Signed-off-by: Scot Doyle <lkml14@scotdoyle.com> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-05-29console: Use explicit pointer type for vc_uni_pagedir* fieldsTakashi Iwai1-2/+3
The vc_data.vc_uni_pagedir filed is currently long int, supposedly to be served generically. This, however, leads to lots of cast to pointer, and rather it worsens the readability significantly. Actually, we have now only a single uni_pagedir map implementation, and this won't change likely. So, it'd be much more simple and error-prone to just use the exact pointer for struct uni_pagedir instead of long. Ditto for vc_uni_pagedir_loc. It's a pointer to the uni_pagedir, thus it can be changed similarly to the exact type. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2010-08-11tty: Move the vt_tty field from the vc_data into the standard tty_portAlan Cox1-1/+0
This takes all the tty references through the expected interface points so we can refcount them. Signed-off-by: Alan Cox <alan@linux.intel.com> Cc: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-08-11tty: Make vt's have a tty_portAlan Cox1-0/+2
The vt layer isn't safely handling reference counts to tty object on the input side. Add a tty port structure to the vt layer in order to implement this using the standard helpers. Signed-off-by: Alan Cox <alan@linux.intel.com> Cc: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-08-11vt/console: try harder to print output when panicingJesse Barnes1-0/+1
Jesse's initial patch commit said: "At panic time (i.e. when oops_in_progress is set) we should try a bit harder to update the screen and make sure output gets to the VT, since some drivers are capable of flipping back to it. So make sure we try to unblank and update the display if called from a panic context." I've enhanced this to add a flag to the vc that console layer can set to indicate they want this behaviour to occur. This also adds support to fbcon for that flag and adds an fb flag for drivers to indicate they want to use the support. It enables this for KMS drivers. Signed-off-by: Dave Airlie <airlied@redhat.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Acked-by: James Simmons <jsimmons@infradead.org> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-07-16vt: drop bootmem/slab memory distinctionJohannes Weiner1-1/+0
Bootmem is not used for the vt screen buffer anymore as slab is now available at the time the console is initialized. Get rid of the now superfluous distinction between slab and bootmem, it's always slab. This also fixes a kmalloc leak which Catalin described thusly: Commit a5f4f52e ("vt: use kzalloc() instead of the bootmem allocator") replaced the alloc_bootmem() with kzalloc() but didn't set vc_kmalloced to 1 and the memory block is later leaked. The corresponding kmemleak trace: unreferenced object 0xdf828000 (size 8192): comm "swapper", pid 0, jiffies 4294937296 backtrace: [<c006d473>] __save_stack_trace+0x17/0x1c [<c000d869>] log_early+0x55/0x84 [<c01cfa4b>] kmemleak_alloc+0x33/0x3c [<c006c013>] __kmalloc+0xd7/0xe4 [<c00108c7>] con_init+0xbf/0x1b8 [<c0010149>] console_init+0x11/0x20 [<c0008797>] start_kernel+0x137/0x1e4 Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Reviewed-by: Pekka Enberg <penberg@cs.helsinki.fi> Tested-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-14Revert "vt: fix background color on line feed"Linus Torvalds1-1/+0
This reverts commit c9e587abfdec2c2aaa55fab83bcb4972e2f84f9b, and the subsequent commits that fixed it up: - afa9b649 "fbcon: prevent cursor disappearance after switching to 512 character font" - d850a2fa "vt/fbcon: fix background color on line feed" - 7fe3915a "vt/fbcon: update scrl_erase_char after 256/512-glyph font switch" by request of Alan Cox. Quoth Alan: "Unfortunately it's wrong and its been causing breakages because various apps like ncurses expect our previous (and correct) behaviour." Alexander sent out a similar patch. Requested-by: Alan Cox <alan@lxorguk.ukuu.org.uk> Tested-by: Jan Engelhardt <jengelh@medozas.de> Cc: Alexander V. Lukyanov <lav@netis.ru> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-29vt: fix background color on line feedJan Engelhardt1-0/+1
A command that causes a line feed while a background color is active, such as perl -e 'print "x" x 60, "\e[44m", "x" x 40, "\e[0m\n"' and perl -e 'print "x" x 40, "\e[44m\n", "x" x 40, "\e[0m\n"' causes the line that was started as a result of the line feed to be completely filled with the currently active background color instead of the default color. When scrolling, part of the current screen is memcpy'd/memmove'd to the new region, and the new line(s) that will appear as a result are cleared using memset. However, the lines are cleared with vc->vc_video_erase_char, causing them to be colored with the currently active background color. This is different from X11 terminal emulators which always paint the new lines with the default background color (e.g. `xterm -bg black`). The clear operation (\e[1J and \e[2J) also use vc_video_erase_char, so a new vc->vc_scrl_erase_char is introduced with contains the erase character used for scrolling, which is built from vc->vc_def_color instead of vc->vc_color. Signed-off-by: Jan Engelhardt <jengelh@computergmbh.de> Cc: "Antonino A. Daplas" <adaplas@pol.net> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-16vt/vgacon: Check if screen resize request comes from userspaceAntonino A. Daplas1-0/+1
Various console drivers are able to resize the screen via the con_resize() hook. This hook is also visible in userspace via the TIOCWINSZ, VT_RESIZE and VT_RESIZEX ioctl's. One particular utility, SVGATextMode, expects that con_resize() of the VGA console will always return success even if the resulting screen is not compatible with the hardware. However, this particular behavior of the VGA console, as reported in Kernel Bugzilla Bug 7513, can cause undefined behavior if the user starts with a console size larger than 80x25. To work around this problem, add an extra parameter to con_resize(). This parameter is ignored by drivers except for vgacon. If this parameter is non-zero, then the resize request came from a VT_RESIZE or VT_RESIZEX ioctl and vgacon will always return success. If this parameter is zero, vgacon will return -EINVAL if the requested size is not compatible with the hardware. The latter is the more correct behavior. With this change, SVGATextMode should still work correctly while in-kernel and stty resize calls can expect correct behavior from vgacon. Signed-off-by: Antonino Daplas <adaplas@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-06-09Protect <linux/console_struct.h> from multiple inclusionRobert P. J. Day1-0/+5
Prevent <linux/console_struct.h> from being included more than once, otherwise you get a redefinition error if you happen to include <linux/vt_kern.h> first. Signed-off-by: Robert P. J. Day <rpjday@mindspring.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-08vt: add color support to the "underline" and "italic" attributesJan Engelhardt1-0/+3
Add color support to the "underline" and "italic" attributes as in OpenBSD/NetBSD-style (vt220) and xterm. Signed-off-by: Jan Engelhardt <jengelh@gmx.de> Acked-by: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-11[PATCH] vt: refactor console SAK processingEric W. Biederman1-0/+3
This does several things. - It moves looking up of the current foreground console into process context where we can safely take the semaphore that protects this operation. - It uses the new flavor of work queue processing. - This generates a factor of do_SAK, __do_SAK that runs immediately. - This calls __do_SAK with the console semaphore held ensuring nothing else happens to the console while we process the SAK operation. - With the console SAK processing moved into process context this patch removes the xchg operations that I used to attempt to attomically update struct pid, because of the strange locking used in the SAK processing. With SAK using the normal console semaphore nothing special is needed. Cc: Oleg Nesterov <oleg@tv-sign.ru> Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2006-10-02[PATCH] vt: Make vt_pid a struct pid (making it pid wrap around safe).Eric W. Biederman1-1/+1
I took a good hard look at the locking and it appears the locking on vt_pid is the console semaphore. Every modified path is called under the console semaphore except reset_vc when it is called from fn_SAK or do_SAK both of which appear to be in interrupt context. In addition I need to be careful because in the presence of an oops the console_sem may be arbitrarily dropped. Which leads me to conclude the current locking is inadequate for my needs. Given the weird cases we could hit because of oops printing instead of introducing an extra spin lock to protect the data and keep the pid to signal and the signal to send in sync, I have opted to use xchg on just the struct pid * pointer instead. Due to console_sem we will stay in sync between vt_pid and vt_mode except for a small window during a SAK, or oops handling. SAK handling should kill any user space process that care, and oops handling we are broken anyway. Besides the worst that can happen is that I try to send the wrong signal. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Cc: Oleg Nesterov <oleg@tv-sign.ru> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-11[PATCH] vt: Remove VT-specific declarations and definitions from tty.hJon Smirl1-0/+1
MAX_NR_CONSOLES, fg_console, want_console and last_console are more of a function of the VT layer than the TTY one. Moving these to vt.h and vt_kern.h allows all of the framebuffer and VT console drivers to remove their dependency on tty.h. [akpm@osdl.org: fix alpha build] Signed-off-by: Jon Smirl <jonsmir@gmail.com> Signed-off-by: Antonino Daplas <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-07[PATCH] console: Fix compile errorAntonino A. Daplas1-0/+2
Fix following compile error (From Kernel Bugzilla Bug 5427): include/linux/console_struct.h:53: error: field `vt_mode' has incomplete type Signed-off-by: Antonino Daplas <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-04-17Linux-2.6.12-rc2Linus Torvalds1-0/+123
Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!