summaryrefslogtreecommitdiff
path: root/include/linux/dmaengine.h
AgeCommit message (Collapse)AuthorFilesLines
2019-05-21treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 7Thomas Gleixner1-13/+1
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details the full gnu general public license is included in this distribution in the file called copying extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 9 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Steve Winslow <swinslow@gmail.com> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Jilayne Lovejoy <opensource@jilayne.com> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190519154041.244154651@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-30dmaengine: add a new helper dmaenginem_async_device_registerHuang Shijie1-0/+1
This patch adds the dmaenginem_async_device_register for DMA code. Use the Devres to call the release for the DMA engine driver. Signed-off-by: Huang Shijie <sjhuang@iluvatar.ai> Signed-off-by: Vinod Koul <vkoul@kernel.org>
2018-07-09dmaengine: add support for reporting pause and resume separatelyMarek Szyprowski1-1/+4
'cmd_pause' DMA channel capability means that respective DMA engine supports both pausing and resuming given DMA channel. However, in some cases it is important to know if DMA channel can be paused without the need to resume it. This is a typical requirement for proper residue reading on transfer timeout in UART drivers. There are also some DMA engines with limited hardware, which doesn't really support resuming. Reporting pause and resume capabilities separately allows UART drivers to properly check for the really required capabilities and operate in DMA mode also in systems with limited DMA hardware. On the other hand drivers, which rely on full channel suspend/resume support, should now check for both 'pause' and 'resume' features. Existing clients of dma_get_slave_caps() have been checked and the only driver which rely on proper channel resuming is soc-generic-dmaengine-pcm driver, which has been updated to check the newly added capability. Existing 'cmd_pause' now only indicates that DMA engine support pausing given DMA channel. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Acked-by: Mark Brown <broonie@kernel.org> Signed-off-by: Vinod Koul <vkoul@kernel.org>
2018-02-12dmaengine: avoid map_cnt overflow with CONFIG_DMA_ENGINE_RAIDZi Yan1-0/+4
When CONFIG_DMA_ENGINE_RAID is enabled, unmap pool size can reach to 256. But in struct dmaengine_unmap_data, map_cnt is only u8, wrapping to 0, if the unmap pool is maximally used. This triggers BUG() when struct dmaengine_unmap_data is freed. Use u16 to fix the problem. Signed-off-by: Zi Yan <zi.yan@cs.rutgers.edu> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2017-09-21dmaengine: Mark struct dma_slave_caps kernel-doc correctly, clarifyStefan Brüns1-12/+16
struct dma_slave_caps documentation omitted the correct kernel-doc opening comment mark. Document byte granularity and interpretation of the src/dst_addr_widths bit flag fields used by struct dma_slave_caps and struct dma_device. Add punctuation to their "directions" member documentations, and cleanup wording of the description. Signed-off-by: Stefan Brüns <stefan.bruens@rwth-aachen.de> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2017-09-21dmaengine: List all allowed values for src/dst_addr_width in kernel docStefan Brüns1-1/+1
Commit 93c6ee94c140 ("dma: Support for 3 bytes word size") and commit 534a729866f9 ("dmaengine: Add 16 bytes, 32 bytes and 64 bytes bus widths") added additional values for the allowed word size, but omitted these from the struct dma_slave_config documentation. Signed-off-by: Stefan Brüns <stefan.bruens@rwth-aachen.de> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2017-09-06Merge branch 'topic/dmatest' into for-linusVinod Koul1-19/+0
2017-08-28dmaengine: add DMA_PREP_CMD for non-Data descriptors.Abhishek Sahu1-0/+4
Some of the DMA controllers are capable of issuing the commands to peripheral by the DMA. These commands can be list of register reads/writes and its different from normal data reads/writes. This patch adds new flag DMA_PREP_CMD in DMA API which tells the driver that the data passed to DMA API is command data and DMA controller driver will form descriptor in the required format. This flag can be used by any DMA controller driver which requires the descriptor in different format for non-Data descriptors. Signed-off-by: Abhishek Sahu <absahu@codeaurora.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2017-08-22dmaengine: remove DMA_SG as it is dead code in kernelDave Jiang1-19/+0
There are no in kernel consumers for DMA_SG op. Removing operation, dead code, and test code in dmatest. Signed-off-by: Dave Jiang <dave.jiang@intel.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Cc: Gary Hook <gary.hook@amd.com> Cc: Ludovic Desroches <ludovic.desroches@microchip.com> Cc: Kedareswara rao Appana <appana.durga.rao@xilinx.com> Cc: Li Yang <leoyang.li@nxp.com> Cc: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2017-01-31dmaengine: Provide a wrapper for memcpy operationsBoris Brezillon1-0/+11
Almost all ->device_prep_dma_xx() methods have a wrapper defined in dmaengine.h. Add one for ->device_prep_dma_memcpy(). Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2016-11-30dmaengine: dma_slave_config: add support for slave port windowPeter Ujfalusi1-0/+8
Some slave devices uses address window instead of single register for read and/or write of data. With the src/dst_port_window_size the address window can be specified and the DMAengine driver should use this information to correctly set up the transfer to loop within the provided window. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2016-08-08dmaengine: add support to provide error result from a DMA transationDave Jiang1-0/+16
Adding a new callback that will provide the error result for a transaction. The result is allocated on the stack and the callback should create a copy if it wishes to retain the information after exiting. The result parameter is now defined and takes over the dummy void pointer we placed in the helper functions previously. dmaengine drivers should start converting to the new "callback_result" callback in order to receive transaction results. Signed-off-by: Dave Jiang <dave.jiang@intel.com> Reviewed-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2016-04-12dmaengine: ensure dmaengine helpers check valid callbackVinod Koul1-1/+19
dmaengine has various device callbacks and exposes helper functions to invoke these. These helpers should check if channel, device and callback is valid or not before invoking them. Reported-by: Jon Hunter <jonathanh@nvidia.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2016-03-14Merge branch 'topic/pl330' into for-linusVinod Koul1-0/+4
2016-02-22dmaengine: make slave address physicalVinod Koul1-2/+2
The slave dmaengine semantics required the client to map dma addresses and pass DMA address to dmaengine drivers. This was a convenient notion coming from generic dma offload cases where dmaengines are interchangeable and client is not aware of which engine to map to. But in case of slave, we know the dmaengine and always use a specific one. Further the IOMMU cases can lead to failure of this notion, so make this as physical address and now dmaengine driver will do the required mapping. Original-patch-by: Linus Walleij <linus.walleij@linaro.org> Original-patch-Acked-by: Lee Jones <lee.jones@linaro.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Tested-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2016-02-09dmaengine: core: expose max burst capability to clientsShawn Lin1-0/+4
This patch add max_burst to dma_get_slave_caps for clients to get the burst capability of slave dma controller. Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com> Signed-off-by: Caesar Wang <wxt@rock-chips.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2016-01-06Merge branch 'topic/async' into for-linusVinod Koul1-0/+92
2016-01-06Merge branch 'topic/univ_api' into for-linusVinod Koul1-7/+44
2015-12-18dmaengine: core: Introduce new, universal API to request a channelPeter Ujfalusi1-7/+44
The two API function can cover most, if not all current APIs used to request a channel. With minimal effort dmaengine drivers, platforms and dmaengine user drivers can be converted to use the two function. struct dma_chan *dma_request_chan_by_mask(const dma_cap_mask_t *mask); To request any channel matching with the requested capabilities, can be used to request channel for memcpy, memset, xor, etc where no hardware synchronization is needed. struct dma_chan *dma_request_chan(struct device *dev, const char *name); To request a slave channel. The dma_request_chan() will try to find the channel via DT, ACPI or in case if the kernel booted in non DT/ACPI mode it will use a filter lookup table and retrieves the needed information from the dma_slave_map provided by the DMA drivers. This legacy mode needs changes in platform code, in dmaengine drivers and finally the dmaengine user drivers can be converted: For each dmaengine driver an array of DMA device, slave and the parameter for the filter function needs to be added: static const struct dma_slave_map da830_edma_map[] = { { "davinci-mcasp.0", "rx", EDMA_FILTER_PARAM(0, 0) }, { "davinci-mcasp.0", "tx", EDMA_FILTER_PARAM(0, 1) }, { "davinci-mcasp.1", "rx", EDMA_FILTER_PARAM(0, 2) }, { "davinci-mcasp.1", "tx", EDMA_FILTER_PARAM(0, 3) }, { "davinci-mcasp.2", "rx", EDMA_FILTER_PARAM(0, 4) }, { "davinci-mcasp.2", "tx", EDMA_FILTER_PARAM(0, 5) }, { "spi_davinci.0", "rx", EDMA_FILTER_PARAM(0, 14) }, { "spi_davinci.0", "tx", EDMA_FILTER_PARAM(0, 15) }, { "da830-mmc.0", "rx", EDMA_FILTER_PARAM(0, 16) }, { "da830-mmc.0", "tx", EDMA_FILTER_PARAM(0, 17) }, { "spi_davinci.1", "rx", EDMA_FILTER_PARAM(0, 18) }, { "spi_davinci.1", "tx", EDMA_FILTER_PARAM(0, 19) }, }; This information is going to be needed by the dmaengine driver, so modification to the platform_data is needed, and the driver map should be added to the pdata of the DMA driver: da8xx_edma0_pdata.slave_map = da830_edma_map; da8xx_edma0_pdata.slavecnt = ARRAY_SIZE(da830_edma_map); The DMA driver then needs to configure the needed device -> filter_fn mapping before it registers with dma_async_device_register() : ecc->dma_slave.filter_map.map = info->slave_map; ecc->dma_slave.filter_map.mapcnt = info->slavecnt; ecc->dma_slave.filter_map.fn = edma_filter_fn; When neither DT or ACPI lookup is available the dma_request_chan() will try to match the requester's device name with the filter_map's list of device names, when a match found it will use the information from the dma_slave_map to get the channel with the dma_get_channel() internal function. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2015-12-05dmaengine: Add might_sleep() to dmaengine_synchronize()Lars-Peter Clausen1-0/+2
Implementations of dmaengine_synchronize() are allowed to sleep, hence the function must not be called to from atomic context. Add might_sleep() to dmaengine_synchronize() to make it easier to detect non-compliant callers. Suggested-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2015-11-16dmaengine: enable DMA_CTRL_REUSERobert Jarzmik1-0/+2
In the current state, the capability of transfer reuse can neither be set by a slave dmaengine driver, nor used by a client driver, because the capability is not available to dma_get_slave_caps(). Fix this by adding a way to declare the capability. Fixes: 272420214d26 ("dmaengine: Add DMA_CTRL_REUSE") Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2015-11-16dmaengine: Add transfer termination synchronization supportLars-Peter Clausen1-0/+90
The DMAengine API has a long standing race condition that is inherent to the API itself. Calling dmaengine_terminate_all() is supposed to stop and abort any pending or active transfers that have previously been submitted. Unfortunately it is possible that this operation races against a currently running (or with some drivers also scheduled) completion callback. Since the API allows dmaengine_terminate_all() to be called from atomic context as well as from within a completion callback it is not possible to synchronize to the execution of the completion callback from within dmaengine_terminate_all() itself. This means that a user of the DMAengine API does not know when it is safe to free resources used in the completion callback, which can result in a use-after-free race condition. This patch addresses the issue by introducing an explicit synchronization primitive to the DMAengine API called dmaengine_synchronize(). The existing dmaengine_terminate_all() is deprecated in favor of dmaengine_terminate_sync() and dmaengine_terminate_async(). The former aborts all pending and active transfers and synchronizes to the current context, meaning it will wait until all running completion callbacks have finished. This means it is only possible to call this function from non-atomic context. The later function does not synchronize, but can still be used in atomic context or from within a complete callback. It has to be followed up by dmaengine_synchronize() before a client can free the resources used in a completion callback. In addition to this the semantics of the device_terminate_all() callback are slightly relaxed by this patch. It is now OK for a driver to only schedule the termination of the active transfer, but does not necessarily have to wait until the DMA controller has completely stopped. The driver must ensure though that the controller has stopped and no longer accesses any memory when the device_synchronize() callback returns. This was in part done since most drivers do not pay attention to this anyway at the moment and to emphasize that this needs to be done when the device_synchronize() callback is implemented. But it also helps with implementing support for devices where stopping the controller can require operations that may sleep. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2015-10-04dma: Add support to program MIC x100 status descriptiorsSiva Yerramreddy1-0/+4
The MIC X100 DMA engine has a special status descriptor which writes an 8 byte value to a destination location. This is used to signal completion of all DMA descriptors prior to the status descriptor. This patch add a new DMA engine API which enables updating a destination address with an 8 byte immediate data value. Reviewed-by: Nikhil Rao <nikhil.rao@intel.com> Reviewed-by: Ashutosh Dixit <ashutosh.dixit@intel.com> Signed-off-by: Lawrynowicz, Jacek <jacek.lawrynowicz@intel.com> Signed-off-by: Sudeep Dutt <sudeep.dutt@intel.com> Signed-off-by: Siva Yerramreddy <yshivakrishna@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-08-20dmaengine: Stricter legacy checking in dma_request_slave_channel_compat()Geert Uytterhoeven1-0/+3
dma_request_slave_channel_compat() is meant for drivers that support both DT and legacy platform device based probing: if DT channel DMA setup fails, it will fall back to platform data based DMA channel setup, using hardcoded DMA channel IDs and a filter function. However, if the DTS doesn't provide a "dmas" property for the device, the fallback is also used. If the legacy filter function is not hardcoded in the DMA slave driver, but comes from platform data, it will be NULL. Then dma_request_slave_channel_compat() will succeed incorrectly, and return a DMA channel, as a NULL legacy filter function actually means "all channels are OK", not "do not match". Later, when trying to use that DMA channel, it will fail with: rcar-dmac e6700000.dma-controller: rcar_dmac_prep_slave_sg: bad parameter: len=1, id=-22 To fix this, ensure that both the filter function and the DMA channel ID are not NULL before using the legacy fallback. Note that some DMA slave drivers can handle this failure, and will fall back to PIO. See also commit 056f6c87028544de ("dmaengine: shdma: Make dummy shdma_chan_filter() always return false"), which fixed the same issue for the case where shdma_chan_filter() is hardcoded in a DMA slave driver. Suggested-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2015-08-17dmaengine: Make __dma_request_slave_channel_compat() name argument constantJarkko Nikula1-1/+1
Inline function __dma_request_slave_channel_compat() doesn't modify "name" argument but passes it to dma_request_slave_channel() which already takes it as a constant. Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2015-08-17dmaengine: Add DMA_CTRL_REUSEVinod Koul1-0/+40
This adds new descriptor flag for reusing a descriptor by submitting multiple times by a client, for example video buffer. Add helper APIs for this as well Signed-off-by: Vinod Koul <vinod.koul@intel.com> Acked-by:Robert Jarzmik <robert.jarzmik@free.fr>
2015-08-06dmaengine: Add scatter-gathered memsetMaxime Ripard1-0/+5
The current API allows the driver to accelerate memset by using the DMA controller. However, it does so over a contiguous memory area, which might proves inefficient when you have to do it over a non-contiguous yet repititive pattern, since you have to create a number of descriptors and then submit each other. Add a memset operation going over a scatter list to handle such cases in a single call. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Ludovic Desroches <ludovic.desroches@atmel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2015-08-05dmaengine: Add an enum for the dmaengine alignment constraintsMaxime Ripard1-5/+20
Most drivers need to set constraints on the buffer alignment for async tx operations. However, even though it is documented, some drivers either use a defined constant that is not matching what the alignment variable expects (like DMA_BUSWIDTH_* constants) or fill the alignment in bytes instead of power of two. Add a new enum for these alignments that matches what the framework expects, and convert the drivers to it. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2015-06-25Merge branch 'topic/xdmac' into for-linusVinod Koul1-0/+27
2015-06-25Merge branch 'topic/omap' into for-linusVinod Koul1-0/+17
2015-06-25Merge branch 'topic/core' into for-linusVinod Koul1-0/+8
2015-06-12dmaengine: Revert "drivers/dma: remove unused support for MEMSET operations"Maxime Ripard1-0/+24
This reverts commit 48a9db462d99494583dad829969616ac90a8df4e. Some platforms actually need support for the memset operations. Bring it back. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2015-06-12dmaengine: Move icg helpers to global headerMaxime Ripard1-0/+27
Now that we can have ICGs set for both the source and destination (using the icg field of struct data_chunk) or for only the source or the destination (using the dst_icg or src_icg respectively), and that these fields can be ignored depending on other parameters (src_inc, src_sgl, etc.), the logic to get the actual ICG value can be quite tricky. The XDMAC driver was already implementing it, but since we will need it in other drivers, we can move it to the main header file. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Ludovic Desroches <ludovic.desroches@atmel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2015-05-18dmaengine: Support different source and destination strideMaxime Ripard1-0/+8
In interleaved mode, we can expect to have different source and destination strides. Add support for such case to dmaengine. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2015-05-09dmaengine: of_dma: Support for DMA routersPeter Ujfalusi1-0/+17
DMA routers are transparent devices used to mux DMA requests from peripherals to DMA controllers. They are used when the SoC integrates more devices with DMA requests then their controller can handle. DRA7x is one example of such SoC, where the sDMA can hanlde 128 DMA request lines, but in SoC level it has 205 DMA requests. The of_dma_router will be registered as of_dma_controller with special xlate function and additional parameters. The driver for the router is responsible to craft the dma_spec (in the of_dma_route_allocate callback) which can be used to requests a DMA channel from the real DMA controller. This way the router can be transparent for the system while remaining generic enough to be used in different environments. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2015-03-16dmaengine: Remove FSF mailing addressesJarkko Nikula1-4/+0
Free Software Foundation mailing address has been moved in the past and some of the addresses here are outdated. Remove them from file headers since the COPYING file in the kernel sources includes it. Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2015-03-05dmaengine: Remove net_dma_find_channelMaxime Ripard1-1/+0
Since commit 7bced397510a ("net_dma: simple removal") removed the net_dma support entirely, net_dma_find_channel has no users left. Remove the function entirely. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2015-03-05dmaengine: Remove net_dma leftoversMaxime Ripard1-23/+0
Commit 7bce d397 510a ("net_dma: simple removal") removed the net_dma support entirely but left some functions and prototypes in the dmaengine header. Remove them. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2015-03-04dmaengine: Remove memset leftoversMaxime Ripard1-8/+0
Commit 48a9db462d99 ("drivers/dma: remove unused support for MEMSET operations") removed support for the memset operation in dmaengine, but left the fill_aligned field that was supposed to set the buffer alignment for the memset operations. Remove that field too. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2015-02-03Merge branch 'topic/rcar' into for-linusVinod Koul1-0/+3
2015-01-19dmaengine: Add dma_get_slave_caps() inline stub when !CONFIG_DMA_ENGINELaurent Pinchart1-2/+6
Commit 0d5484b1c3db8a38 ("dmaengine: Move dma_get_slave_caps() implementation to dmaengine.c") turned the inline dma_get_slave_caps() function into an external function without adding an inline stub for the cases where CONFIG_DMA_ENGINE isn't set. This breaks compilation of drivers using the DMA engine API when CONFIG_DMA_ENGINE isn't set. Add an inline stub to fix compilation. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Fixes: 0d5484b1c3db ("dmaengine: Move dma_get_slave_caps() implementation to dmaengine.c") Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2015-01-18dmaengine: Move dma_get_slave_caps() implementation to dmaengine.cLaurent Pinchart1-31/+1
The function is too big to be a static inline. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2014-12-23dmaengine: Add 16 bytes, 32 bytes and 64 bytes bus widthsLaurent Pinchart1-0/+3
The widths are missing, add them. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Tested-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
2014-12-22dmaengine: Remove device_control and device_slave_capsMaxime Ripard1-46/+6
Now that device_control has been split into several functions, and device_slave_caps rendered useless, we can safely remove them. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2014-12-22dmaengine: Create a generic dma_slave_caps callbackMaxime Ripard1-4/+37
dma_slave_caps is very important to the generic layers that might interact with dmaengine, such as ASoC. Unfortunately, it has been added as yet another dma_device callback, and most of the existing drivers haven't implemented it, reducing its reliability. Introduce a generic behaviour to implement this, that rely on both the split of device_control to derive which functions are supported and on new variables to be set in the dma_device structure. These variables holds what used to be the capabilities, that were set per-channel. However, this proved to be a bit overkill, since every driver filling these so far were hardcoding it, disregarding which channel was actually given. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2014-12-22dmaengine: Add device_terminate_all callbackMaxime Ripard1-0/+6
Split out the terminate_all command from device_control to a dma_device callback. In order to preserve backward capability, still rely on device_control if no such callback has been implemented. Eventually, this will allow to create a generic dma_slave_caps callback. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2014-12-22dmaengine: split out pause/resume operations from device_controlMaxime Ripard1-0/+12
Split out the pause and resume operations to callbacks of their own. In order to preserve some backwark compatibility, the dmaengine_pause/dmaengine_resume are still falling back on dmaengine_device_control. Eventually, that will allow to get the device capabilities in a generic way, removing the need to implement device_slave_caps. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2014-12-22dmaengine: Introduce a device_config callbackMaxime Ripard1-0/+8
The fact that the channel configuration is done in device_control is rather misleading, since it's not really advertised as such, plus, the fact that the framework exposes a function of its own makes it not really intuitive, while we're losing the type checking whenever we pass that unsigned long argument. Add a device_config callback to dma_device, with a fallback on the old behaviour for now for existing drivers to opt in. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2014-12-22dmaengine: Make the destination abbreviation coherentMaxime Ripard1-4/+4
The dmaengine header abbreviates destination as at least two different strings. Make a coherent use of a single one. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Mark Brown <broonie@kernel.org> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Stephen Warren <swarren@wwwdotorg.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2014-12-05dmaengine: clarify the issue_pending expectationsVinod Koul1-1/+2
Although Documentation explicitly mentions the expectations, the comment in header can be lead to different expectation so clear up the confusion Signed-off-by: Vinod Koul <vinod.koul@intel.com>