summaryrefslogtreecommitdiff
path: root/include/linux/fscrypt_supp.h
AgeCommit message (Collapse)AuthorFilesLines
2017-11-14Merge tag 'fscrypt-for-linus' of ↵Linus Torvalds1-3/+14
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/fscrypt Pull fscrypt updates from Ted Ts'o: "Lots of cleanups, mostly courtesy by Eric Biggers" * tag 'fscrypt-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/fscrypt: fscrypt: lock mutex before checking for bounce page pool fscrypt: add a documentation file for filesystem-level encryption ext4: switch to fscrypt_prepare_setattr() ext4: switch to fscrypt_prepare_lookup() ext4: switch to fscrypt_prepare_rename() ext4: switch to fscrypt_prepare_link() ext4: switch to fscrypt_file_open() fscrypt: new helper function - fscrypt_prepare_setattr() fscrypt: new helper function - fscrypt_prepare_lookup() fscrypt: new helper function - fscrypt_prepare_rename() fscrypt: new helper function - fscrypt_prepare_link() fscrypt: new helper function - fscrypt_file_open() fscrypt: new helper function - fscrypt_require_key() fscrypt: remove unneeded empty fscrypt_operations structs fscrypt: remove ->is_encrypted() fscrypt: switch from ->is_encrypted() to IS_ENCRYPTED() fs, fscrypt: add an S_ENCRYPTED inode flag fscrypt: clean up include file mess
2017-11-02License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseGreg Kroah-Hartman1-0/+1
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-10-19fscrypt: new helper function - fscrypt_prepare_lookup()Eric Biggers1-0/+1
Introduce a helper function which prepares to look up the given dentry in the given directory. If the directory is encrypted, it handles loading the directory's encryption key, setting the dentry's ->d_op to fscrypt_d_ops, and setting DCACHE_ENCRYPTED_WITH_KEY if the directory's encryption key is available. Note: once all filesystems switch over to this, we'll be able to move fscrypt_d_ops and fscrypt_set_encrypted_dentry() to fscrypt_private.h. Acked-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2017-10-19fscrypt: new helper function - fscrypt_prepare_rename()Eric Biggers1-0/+5
Introduce a helper function which prepares to rename a file into a possibly encrypted directory. It handles loading the encryption keys for the source and target directories if needed, and it handles enforcing that if the target directory (and the source directory for a cross-rename) is encrypted, then the file being moved into the directory has the same encryption policy as its containing directory. Acked-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2017-10-19fscrypt: new helper function - fscrypt_prepare_link()Eric Biggers1-0/+1
Introduce a helper function which prepares to link an inode into a possibly-encrypted directory. It handles setting up the target directory's encryption key, then verifying that the link won't violate the constraint that all files in an encrypted directory tree use the same encryption policy. Acked-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2017-10-19fscrypt: new helper function - fscrypt_file_open()Eric Biggers1-0/+3
Add a helper function which prepares to open a regular file which may be encrypted. It handles setting up the file's encryption key, then checking that the file's encryption policy matches that of its parent directory (if the parent directory is encrypted). It may be set as the ->open() method or it can be called from another ->open() method. Acked-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2017-10-19fscrypt: clean up include file messDave Chinner1-3/+4
Filesystems have to include different header files based on whether they are compiled with encryption support or not. That's nasty and messy. Instead, rationalise the headers so we have a single include fscrypt.h and let it decide what internal implementation to include based on the __FS_HAS_ENCRYPTION define. Filesystems set __FS_HAS_ENCRYPTION to 1 before including linux/fscrypt.h if they are built with encryption support. Otherwise, they must set __FS_HAS_ENCRYPTION to 0. Add guards to prevent fscrypt_supp.h and fscrypt_notsupp.h from being directly included by filesystems. Signed-off-by: Dave Chinner <dchinner@redhat.com> [EB: use 1 and 0 rather than defined/undefined] Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2017-06-24fscrypt: inline fscrypt_free_filename()Eric Biggers1-1/+6
fscrypt_free_filename() only needs to do a kfree() of crypto_buf.name, which works well as an inline function. We can skip setting the various pointers to NULL, since no user cares about it (the name is always freed just before it goes out of scope). Signed-off-by: Eric Biggers <ebiggers@google.com> Reviewed-by: David Gstir <david@sigma-star.at> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2017-05-04fscrypt: correct collision claim for digested namesEric Biggers1-13/+9
As I noted on the mailing list, it's easier than I originally thought to create intentional collisions in the digested names. Unfortunately it's not too easy to solve this, so for now just fix the comment to not lie. Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2017-05-04fscrypt: introduce helper function for filename matchingEric Biggers1-0/+78
Introduce a helper function fscrypt_match_name() which tests whether a fscrypt_name matches a directory entry. Also clean up the magic numbers and document things properly. Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2017-02-07fscrypt: split supp and notsupp declarations into their own headersEric Biggers1-0/+66
Previously, each filesystem configured without encryption support would define all the public fscrypt functions to their notsupp_* stubs. This list of #defines had to be updated in every filesystem whenever a change was made to the public fscrypt functions. To make things more maintainable now that we have three filesystems using fscrypt, split the old header fscrypto.h into several new headers. fscrypt_supp.h contains the real declarations and is included by filesystems when configured with encryption support, whereas fscrypt_notsupp.h contains the inline stubs and is included by filesystems when configured without encryption support. fscrypt_common.h contains common declarations needed by both. Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu>