summaryrefslogtreecommitdiff
path: root/include/linux/ftrace_event.h
AgeCommit message (Collapse)AuthorFilesLines
2012-06-28tracing: Remove NR_CPUS array from trace_iteratorSteven Rostedt1-1/+1
Replace the NR_CPUS array of buffer_iter from the trace_iterator with an allocated array. This will just create an array of possible CPUS instead of the max number specified. The use of NR_CPUS in that array caused allocation failures for machines that were tight on memory. This did not cause any failures to the system itself (no crashes), but caused unnecessary failures for reading the trace files. Added a helper function called 'trace_buffer_iter()' that returns the buffer_iter item or NULL if it is not defined or the array was not allocated. Some routines do not require the array (tracing_open_pipe() for one). Reported-by: Dave Jones <davej@redhat.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2012-06-14tracing: Add comments for the other bits of ftrace_event_call.flagsSteven Rostedt1-0/+3
TRACE_EVENT_FL_ENABLED_BIT, TRACE_EVENT_FL_FILTERED_BIT, TRACE_EVENT_FL_RECORDED_CMD_BIT, Have comments about what they are, but: TRACE_EVENT_FL_CAP_ANY_BIT, TRACE_EVENT_FL_NO_SET_FILTER_BIT, TRACE_EVENT_FL_IGNORE_ENABLE_BIT, do not, making them second class citizens. To prevent another class warfare, these bits have protested for their right to be commented. And By Golly! I'll give them what they want! Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2012-05-10tracing: Do not enable function event with enableSteven Rostedt1-0/+2
With the adding of function tracing event to perf, it caused a side effect that produces the following warning when enabling all events in ftrace: # echo 1 > /sys/kernel/debug/tracing/events/enable [console] event trace: Could not enable event function This is because when enabling all events via the debugfs system it ignores events that do not have a ->reg() function assigned. This was to skip over the ftrace internal events (as they are not TRACE_EVENTs). But as the ftrace function event now has a ->reg() function attached to it for use with perf, it is no longer ignored. Worse yet, this ->reg() function is being called when it should not be. It returns an error and causes the above warning to be printed. By adding a new event_call flag (TRACE_EVENT_FL_IGNORE_ENABLE) and have all ftrace internel event structures have it set, setting the events/enable will no longe try to incorrectly enable the function event and does not warn. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2012-03-14perf: Add ifdef to remove unused enum switch warningsJiri Olsa1-0/+2
Fix for unused symbols in switch warnings. Link: http://lkml.kernel.org/r/20120313230302.GA1514@m.redhat.com Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@redhat.com> Signed-off-by: Jiri Olsa <jolsa@redhat.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2012-02-21ftrace: Allow to specify filter field type for ftrace eventsJiri Olsa1-0/+1
Adding FILTER_TRACE_FN event field type for function tracepoint event, so it can be properly recognized within filtering code. Currently all fields of ftrace subsystem events share the common field type FILTER_OTHER. Since the function trace fields need special care within the filtering code we need to recognize it properly, hence adding the FILTER_TRACE_FN event type. Adding filter parameter to the FTRACE_ENTRY macro, to specify the filter field type for the event. Link: http://lkml.kernel.org/r/1329317514-8131-7-git-send-email-jolsa@redhat.com Signed-off-by: Jiri Olsa <jolsa@redhat.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2012-02-21ftrace, perf: Add add/del tracepoint perf registration actionsJiri Olsa1-0/+2
Adding TRACE_REG_PERF_ADD and TRACE_REG_PERF_DEL to handle perf event schedule in/out actions. The add action is invoked for when the perf event is scheduled in, while the del action is invoked when the event is scheduled out. Link: http://lkml.kernel.org/r/1329317514-8131-4-git-send-email-jolsa@redhat.com Acked-by: Frederic Weisbecker <fweisbec@gmail.com> Signed-off-by: Jiri Olsa <jolsa@redhat.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2012-02-21ftrace, perf: Add open/close tracepoint perf registration actionsJiri Olsa1-2/+4
Adding TRACE_REG_PERF_OPEN and TRACE_REG_PERF_CLOSE to differentiate register/unregister from open/close actions. The register/unregister actions are invoked for the first/last tracepoint user when opening/closing the event. The open/close actions are invoked for each tracepoint user when opening/closing the event. Link: http://lkml.kernel.org/r/1329317514-8131-3-git-send-email-jolsa@redhat.com Acked-by: Frederic Weisbecker <fweisbec@gmail.com> Signed-off-by: Jiri Olsa <jolsa@redhat.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-12-05tracing: Restore system filter behaviorLi Zefan1-0/+2
Though not all events have field 'prev_pid', it was allowed to do this: # echo 'prev_pid == 100' > events/sched/filter but commit 75b8e98263fdb0bfbdeba60d4db463259f1fe8a2 (tracing/filter: Swap entire filter of events) broke it without any reason. Link: http://lkml.kernel.org/r/4EAF46CF.8040408@cn.fujitsu.com Signed-off-by: Li Zefan <lizf@cn.fujitsu.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-07-15tracing: Have dynamic size event stack tracesSteven Rostedt1-0/+1
Currently the stack trace per event in ftace is only 8 frames. This can be quite limiting and sometimes useless. Especially when the "ignore frames" is wrong and we also use up stack frames for the event processing itself. Change this to be dynamic by adding a percpu buffer that we can write a large stack frame into and then copy into the ring buffer. For interrupts and NMIs that come in while another event is being process, will only get to use the 8 frame stack. That should be enough as the task that it interrupted will have the full stack frame anyway. Requested-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-06-15tracing/kprobes: Fix kprobe-tracer to support stack traceMasami Hiramatsu1-0/+4
Fix to support kernel stack trace correctly on kprobe-tracer. Since the execution path of kprobe-based dynamic events is different from other tracepoint-based events, normal ftrace_trace_stack() doesn't work correctly. To fix that, this introduces ftrace_trace_stack_regs() which traces stack via pt_regs instead of current stack register. e.g. # echo p schedule+4 > /sys/kernel/debug/tracing/kprobe_events # echo 1 > /sys/kernel/debug/tracing/options/stacktrace # echo 1 > /sys/kernel/debug/tracing/events/kprobes/enable # head -n 20 /sys/kernel/debug/tracing/trace bash-2968 [000] 10297.050245: p_schedule_4: (schedule+0x4/0x4ca) bash-2968 [000] 10297.050247: <stack trace> => schedule_timeout => n_tty_read => tty_read => vfs_read => sys_read => system_call_fastpath kworker/0:1-2940 [000] 10297.050265: p_schedule_4: (schedule+0x4/0x4ca) kworker/0:1-2940 [000] 10297.050266: <stack trace> => worker_thread => kthread => kernel_thread_helper sshd-1132 [000] 10297.050365: p_schedule_4: (schedule+0x4/0x4ca) sshd-1132 [000] 10297.050365: <stack trace> => sysret_careful Note: Even with this fix, the first entry will be skipped if the probe is put on the function entry area before the frame pointer is set up (usually, that is 4 bytes (push %bp; mov %sp %bp) on x86), because stack unwinder depends on the frame pointer. Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: yrl.pp-manager.tt@hitachi.com Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Namhyung Kim <namhyung@gmail.com> Link: http://lkml.kernel.org/r/20110608070934.17777.17116.stgit@fedora15 Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-05-26tracing: Add __print_symbolic_u64 to avoid warnings on 32bit machineliubo1-0/+12
Filesystem, like Btrfs, has some "ULL" macros, and when these macros are passed to tracepoints'__print_symbolic(), there will be 64->32 truncate WARNINGS during compiling on 32bit box. Signed-off-by: Liu Bo <liubo2009@cn.fujitsu.com> Link: http://lkml.kernel.org/r/4DACE6E0.7000507@cn.fujitsu.com Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-05-07Regression: partial revert "tracing: Remove lock_depth from event entry"Arjan van de Ven1-0/+1
This partially reverts commit e6e1e2593592a8f6f6380496655d8c6f67431266. That commit changed the structure layout of the trace structure, which in turn broke PowerTOP (1.9x generation) quite badly. I appreciate not wanting to expose the variable in question, and PowerTOP was not using it, so I've replaced the variable with just a padding field - that way if in the future a new field is needed it can just use this padding field. Signed-off-by: Arjan van de Ven <arjan@linux.intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-03-10tracing: Remove lock_depth from event entrySteven Rostedt1-1/+0
The lock_depth field in the event headers was added as a temporary data point for help in removing the BKL. Now that the BKL is pretty much been removed, we can remove this field. This in turn changes the header from 12 bytes to 8 bytes, removing the 4 byte buffer that gcc would insert if the first field in the data load was 8 bytes in size. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-02-08tracing/filter: Move MAX_FILTER_PRED to local tracing directorySteven Rostedt1-1/+0
The MAX_FILTER_PRED is only needed by the kernel/trace/*.c files. Move it to kernel/trace/trace.h. Cc: Tom Zanussi <tzanussi@gmail.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-19tracing/events: Show real number in array fieldsSteven Rostedt1-0/+4
Currently we have in something like the sched_switch event: field:char prev_comm[TASK_COMM_LEN]; offset:12; size:16; signed:1; When a userspace tool such as perf tries to parse this, the TASK_COMM_LEN is meaningless. This is done because the TRACE_EVENT() macro simply uses a #len to show the string of the length. When the length is an enum, we get a string that means nothing for tools. By adding a static buffer and a mutex to protect it, we can store the string into that buffer with snprintf and show the actual number. Now we get: field:char prev_comm[16]; offset:12; size:16; signed:1; Something much more useful. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-11-18tracing: Allow syscall trace events for non privileged usersFrederic Weisbecker1-0/+8
As for the raw syscalls events, individual syscall events won't leak system wide information on task bound tracing. Allow non privileged users to use them in such workflow. Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Li Zefan <lizf@cn.fujitsu.com> Cc: Jason Baron <jbaron@redhat.com>
2010-11-18tracing: New flag to allow non privileged users to use a trace eventFrederic Weisbecker1-0/+2
This adds a new trace event internal flag that allows them to be used in perf by non privileged users in case of task bound tracing. This is desired for syscalls tracepoint because they don't leak global system informations, like some other tracepoints. Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Li Zefan <lizf@cn.fujitsu.com> Cc: Jason Baron <jbaron@redhat.com>
2010-09-09perf: Rework the PMU methodsPeter Zijlstra1-2/+2
Replace pmu::{enable,disable,start,stop,unthrottle} with pmu::{add,del,start,stop}, all of which take a flags argument. The new interface extends the capability to stop a counter while keeping it scheduled on the PMU. We replace the throttled state with the generic stopped state. This also allows us to efficiently stop/start counters over certain code paths (like IRQ handlers). It also allows scheduling a counter without it starting, allowing for a generic frozen state (useful for rotating stopped counters). The stopped state is implemented in two different ways, depending on how the architecture implemented the throttled state: 1) We disable the counter: a) the pmu has per-counter enable bits, we flip that b) we program a NOP event, preserving the counter state 2) We store the counter state and ignore all read/overflow events Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: paulus <paulus@samba.org> Cc: stephane eranian <eranian@googlemail.com> Cc: Robert Richter <robert.richter@amd.com> Cc: Will Deacon <will.deacon@arm.com> Cc: Paul Mundt <lethal@linux-sh.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Cyrill Gorcunov <gorcunov@gmail.com> Cc: Lin Ming <ming.m.lin@intel.com> Cc: Yanmin <yanmin_zhang@linux.intel.com> Cc: Deng-Cheng Zhu <dengcheng.zhu@gmail.com> Cc: David Miller <davem@davemloft.net> Cc: Michael Cree <mcree@orcon.net.nz> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-08-19perf, tracing: add missing __percpu markupsNamhyung Kim1-2/+2
ftrace_event_call->perf_events, perf_trace_buf, fgraph_data->cpu_data and some local variables are percpu pointers missing __percpu markups. Add them. Signed-off-by: Namhyung Kim <namhyung@gmail.com> Acked-by: Tejun Heo <tj@kernel.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Ingo Molnar <mingo@elte.hu> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Stephane Eranian <eranian@google.com> LKML-Reference: <1281498479-28551-1-git-send-email-namhyung@gmail.com> Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
2010-07-21tracing: Reduce latency and remove percpu trace_seqLai Jiangshan1-2/+3
__print_flags() and __print_symbolic() use percpu trace_seq: 1) Its memory is allocated at compile time, it wastes memory if we don't use tracing. 2) It is percpu data and it wastes more memory for multi-cpus system. 3) It disables preemption when it executes its core routine "trace_seq_printf(s, "%s: ", #call);" and introduces latency. So we move this trace_seq to struct trace_iterator. Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com> LKML-Reference: <4C078350.7090106@cn.fujitsu.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-07-21tracing: Allow to disable cmdline recordingLi Zefan1-2/+5
We found that even enabling a single trace event that will rarely be triggered can add big overhead to context switch. (lmbench context switch test) ------------------------------------------------- 2p/0K 2p/16K 2p/64K 8p/16K 8p/64K 16p/16K 16p/64K ctxsw ctxsw ctxsw ctxsw ctxsw ctxsw ctxsw ------ ------ ------ ------ ------ ------- ------- 2.19 2.3 2.21 2.56 2.13 2.54 2.07 2.39 2.51 2.35 2.75 2.27 2.81 2.24 The overhead is 6% ~ 11%. It's because when a trace event is enabled 3 tracepoints (sched_switch, sched_wakeup, sched_wakeup_new) will be activated to map pid to cmdname. We'd like to avoid this overhead, so add a trace option '(no)record-cmd' to allow to disable cmdline recording. Signed-off-by: Li Zefan <lizf@cn.fujitsu.com> LKML-Reference: <4C2D57F4.2050204@cn.fujitsu.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-06-29tracing: Use class->reg() for all registering of eventsSteven Rostedt1-0/+3
Because kprobes and syscalls need special processing to register events, the class->reg() method was created to handle the differences. But instead of creating a default ->reg for perf and ftrace events, the code was scattered with: if (class->reg) class->reg(); else default_reg(); This is messy and can also lead to bugs. This patch cleans up this code and creates a default reg() entry for the events allowing for the code to directly call the class->reg() without the condition. Reported-by: Peter Zijlstra <peterz@infradead.org> Acked-by: Peter Zijlstra <peterz@infradead.org> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-06-09perf, trace: Inline perf_swevent_put_recursion_context()Peter Zijlstra1-2/+1
Inline perf_swevent_put_recursion_context into perf_tp_event(), this shrinks the per trace template code footprint and saves a function call. Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-05-28Merge branch 'perf-core-for-linus' of ↵Linus Torvalds1-28/+75
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (61 commits) tracing: Add __used annotation to event variable perf, trace: Fix !x86 build bug perf report: Support multiple events on the TUI perf annotate: Fix up usage of the build id cache x86/mmiotrace: Remove redundant instruction prefix checks perf annotate: Add TUI interface perf tui: Remove annotate from popup menu after failure perf report: Don't start the TUI if -D is used perf: Fix getline undeclared perf: Optimize perf_tp_event_match() perf: Remove more code from the fastpath perf: Optimize the !vmalloc backed buffer perf: Optimize perf_output_copy() perf: Fix wakeup storm for RO mmap()s perf-record: Share per-cpu buffers perf-record: Remove -M perf: Ensure that IOC_OUTPUT isn't used to create multi-writer buffers perf, trace: Optimize tracepoints by using per-tracepoint-per-cpu hlist to track events perf, trace: Optimize tracepoints by removing IRQ-disable from perf/tracepoint interaction perf tui: Allow disabling the TUI on a per command basis in ~/.perfconfig ...
2010-05-21Merge branch 'perf/core' of ↵Steven Rostedt1-11/+12
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip into trace/tip/tracing/core-7 Conflicts: include/linux/ftrace_event.h include/trace/ftrace.h kernel/trace/trace_event_perf.c kernel/trace/trace_kprobe.c kernel/trace/trace_syscalls.c Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-05-21Merge git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6Linus Torvalds1-0/+3
* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (182 commits) [SCSI] aacraid: add an ifdef'd device delete case instead of taking the device offline [SCSI] aacraid: prohibit access to array container space [SCSI] aacraid: add support for handling ATA pass-through commands. [SCSI] aacraid: expose physical devices for models with newer firmware [SCSI] aacraid: respond automatically to volumes added by config tool [SCSI] fcoe: fix fcoe module ref counting [SCSI] libfcoe: FIP Keep-Alive messages for VPorts are sent with incorrect port_id and wwn [SCSI] libfcoe: Fix incorrect MAC address clearing [SCSI] fcoe: fix a circular locking issue with rtnl and sysfs mutex [SCSI] libfc: Move the port_id into lport [SCSI] fcoe: move link speed checking into its own routine [SCSI] libfc: Remove extra pointer check [SCSI] libfc: Remove unused fc_get_host_port_type [SCSI] fcoe: fixes wrong error exit in fcoe_create [SCSI] libfc: set seq_id for incoming sequence [SCSI] qla2xxx: Updates to ISP82xx support. [SCSI] qla2xxx: Optionally disable target reset. [SCSI] qla2xxx: ensure flash operation and host reset via sg_reset are mutually exclusive [SCSI] qla2xxx: Silence bogus warning by gcc for wrap and did. [SCSI] qla2xxx: T10 DIF support added. ...
2010-05-21perf, trace: Optimize tracepoints by using per-tracepoint-per-cpu hlist to ↵Peter Zijlstra1-8/+8
track events Avoid the swevent hash-table by using per-tracepoint hlists. Also, avoid conditionals on the fast path by ordering with probe unregister so that we should never get on the callback path without the data being there. Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Steven Rostedt <rostedt@goodmis.org> LKML-Reference: <20100521090710.473188012@chello.nl> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-05-21perf, trace: Optimize tracepoints by removing IRQ-disable from ↵Peter Zijlstra1-6/+3
perf/tracepoint interaction Improves performance. Acked-by: Frederic Weisbecker <fweisbec@gmail.com> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Steven Rostedt <rostedt@goodmis.org> LKML-Reference: <1274259525.5605.10352.camel@twins> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-05-20Merge branch 'perf/urgent' of ↵Ingo Molnar1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/frederic/random-tracing into perf/core
2010-05-18perf/ftrace: Optimize perf/tracepoint interaction for single eventsPeter Zijlstra1-3/+5
When we've got but a single event per tracepoint there is no reason to try and multiplex it so don't. Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Tested-by: Ingo Molnar <mingo@elte.hu> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-05-15tracing: Comment the use of event_mutex with trace event flagsSteven Rostedt1-1/+8
The flags variable is protected by the event_mutex when modifying, but the event_mutex is not held when reading the variable. This is due to the fact that the reads occur in critical sections where taking a mutex (or even a spinlock) is not wanted. But the two flags that exist (enable and filter_active) have the code written as such to handle the reads to not need a lock. The enable flag is used just to know if the event is enabled or not and its use is always under the event_mutex. Whether or not the event is actually enabled is really determined by the tracepoint being registered. The flag is just a way to let the code know if the tracepoint is registered. The filter_active is different. It is read without the lock. If it is set, then the event probes jump to the filter code. There can be a slight mismatch between filters available and filter_active. If the flag is set but no filters are available, the code safely jumps to a filter nop. If the flag is not set and the filters are available, then the filters are skipped. This is acceptable since filters are usually set before tracing or they are set by humans, which would not notice the slight delay that this causes. v2: Fixed typo: "cacheing" -> "caching" Reported-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Acked-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Cc: Tom Zanussi <tzanussi@gmail.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-05-14tracing: Combine event filter_active and enable into single flags fieldSteven Rostedt1-2/+19
The filter_active and enable both use an int (4 bytes each) to set a single flag. We can save 4 bytes per event by combining the two into a single integer. text data bss dec hex filename 4913961 1088356 861512 6863829 68bbd5 vmlinux.orig 4894944 1018052 861512 6774508 675eec vmlinux.id 4894871 1012292 861512 6768675 674823 vmlinux.flags This gives us another 5K in savings. The modification of both the enable and filter fields are done under the event_mutex, so it is still safe to combine the two. Note: Although Mathieu gave his Acked-by, he would like it documented that the reads of flags are not protected by the mutex. The way the code works, these reads will not break anything, but will have a residual effect. Since this behavior is the same even before this patch, describing this situation is left to another patch, as this patch does not change the behavior, but just brought it to Mathieu's attention. v2: Updated the event trace self test to for this change. Acked-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Acked-by: Masami Hiramatsu <mhiramat@redhat.com> Acked-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Tom Zanussi <tzanussi@gmail.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-05-14tracing: Remove duplicate id information in event structureSteven Rostedt1-3/+2
Now that the trace_event structure is embedded in the ftrace_event_call structure, there is no need for the ftrace_event_call id field. The id field is the same as the trace_event type field. Removing the id and re-arranging the structure brings down the tracepoint footprint by another 5K. text data bss dec hex filename 4913961 1088356 861512 6863829 68bbd5 vmlinux.orig 4895024 1023812 861512 6780348 6775bc vmlinux.print 4894944 1018052 861512 6774508 675eec vmlinux.id Acked-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Acked-by: Masami Hiramatsu <mhiramat@redhat.com> Acked-by: Frederic Weisbecker <fweisbec@gmail.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-05-14tracing: Move print functions into event classSteven Rostedt1-1/+1
Currently, every event has its own trace_event structure. This is fine since the structure is needed anyway. But the print function structure (trace_event_functions) is now separate. Since the output of the trace event is done by the class (with the exception of events defined by DEFINE_EVENT_PRINT), it makes sense to have the class define the print functions that all events in the class can use. This makes a bigger deal with the syscall events since all syscall events use the same class. The savings here is another 30K. text data bss dec hex filename 4913961 1088356 861512 6863829 68bbd5 vmlinux.orig 4900382 1048964 861512 6810858 67ecea vmlinux.init 4900446 1049028 861512 6810986 67ed6a vmlinux.preprint 4895024 1023812 861512 6780348 6775bc vmlinux.print To accomplish this, and to let the class know what event is being printed, the event structure is embedded in the ftrace_event_call structure. This should not be an issues since the event structure was created for each event anyway. Acked-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Acked-by: Masami Hiramatsu <mhiramat@redhat.com> Acked-by: Frederic Weisbecker <fweisbec@gmail.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-05-14tracing: Allow events to share their print functionsSteven Rostedt1-5/+12
Multiple events may use the same method to print their data. Instead of having all events have a pointer to their print funtions, the trace_event structure now points to a trace_event_functions structure that will hold the way to print ouf the event. The event itself is now passed to the print function to let the print function know what kind of event it should print. This opens the door to consolidating the way several events print their output. text data bss dec hex filename 4913961 1088356 861512 6863829 68bbd5 vmlinux.orig 4900382 1048964 861512 6810858 67ecea vmlinux.init 4900446 1049028 861512 6810986 67ed6a vmlinux.preprint This change slightly increases the size but is needed for the next change. v3: Fix the branch tracer events to handle this change. v2: Fix the new function graph tracer event calls to handle this change. Acked-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Acked-by: Masami Hiramatsu <mhiramat@redhat.com> Acked-by: Frederic Weisbecker <fweisbec@gmail.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-05-14tracing: Move raw_init from events to classSteven Rostedt1-1/+1
The raw_init function pointer in the event is used to initialize various kinds of events. The type of initialization needed is usually classed to the kind of event it is. Two events with the same class will always have the same initialization function, so it makes sense to move this to the class structure. Perhaps even making a special system structure would work since the initialization is the same for all events within a system. But since there's no system structure (yet), this will just move it to the class. text data bss dec hex filename 4913961 1088356 861512 6863829 68bbd5 vmlinux.orig 4900375 1053380 861512 6815267 67fe23 vmlinux.fields 4900382 1048964 861512 6810858 67ecea vmlinux.init The text grew very slightly, but this is a constant growth that happened with the changing of the C files that call the init code. The bigger savings is the data which will be saved the more events share a class. Acked-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Acked-by: Masami Hiramatsu <mhiramat@redhat.com> Acked-by: Frederic Weisbecker <fweisbec@gmail.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-05-14tracing: Move fields from event to class structureSteven Rostedt1-2/+3
Move the defined fields from the event to the class structure. Since the fields of the event are defined by the class they belong to, it makes sense to have the class hold the information instead of the individual events. The events of the same class would just hold duplicate information. After this change the size of the kernel dropped another 3K: text data bss dec hex filename 4913961 1088356 861512 6863829 68bbd5 vmlinux.orig 4900252 1057412 861512 6819176 680d68 vmlinux.regs 4900375 1053380 861512 6815267 67fe23 vmlinux.fields Although the text increased, this was mainly due to the C files having to adapt to the change. This is a constant increase, where new tracepoints will not increase the Text. But the big drop is in the data size (as well as needed allocations to hold the fields). This will give even more savings as more tracepoints are created. Note, if just TRACE_EVENT()s are used and not DECLARE_EVENT_CLASS() with several DEFINE_EVENT()s, then the savings will be lost. But we are pushing developers to consolidate events with DEFINE_EVENT() so this should not be an issue. The kprobes define a unique class to every new event, but are dynamic so it should not be a issue. The syscalls however have a single class but the fields for the individual events are different. The syscalls use a metadata to define the fields. I moved the fields list from the event to the metadata and added a "get_fields()" function to the class. This function is used to find the fields. For normal events and kprobes, get_fields() just returns a pointer to the fields list_head in the class. For syscall events, it returns the fields list_head in the metadata for the event. v2: Fixed the syscall fields. The syscall metadata needs a list of fields for both enter and exit. Acked-by: Frederic Weisbecker <fweisbec@gmail.com> Acked-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Acked-by: Masami Hiramatsu <mhiramat@redhat.com> Cc: Tom Zanussi <tzanussi@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-05-14tracing: Remove per event trace registeringSteven Rostedt1-4/+15
This patch removes the register functions of TRACE_EVENT() to enable and disable tracepoints. The registering of a event is now down directly in the trace_events.c file. The tracepoint_probe_register() is now called directly. The prototypes are no longer type checked, but this should not be an issue since the tracepoints are created automatically by the macros. If a prototype is incorrect in the TRACE_EVENT() macro, then other macros will catch it. The trace_event_class structure now holds the probes to be called by the callbacks. This removes needing to have each event have a separate pointer for the probe. To handle kprobes and syscalls, since they register probes in a different manner, a "reg" field is added to the ftrace_event_class structure. If the "reg" field is assigned, then it will be called for enabling and disabling of the probe for either ftrace or perf. To let the reg function know what is happening, a new enum (trace_reg) is created that has the type of control that is needed. With this new rework, the 82 kernel events and 618 syscall events has their footprint dramatically lowered: text data bss dec hex filename 4913961 1088356 861512 6863829 68bbd5 vmlinux.orig 4914025 1088868 861512 6864405 68be15 vmlinux.class 4918492 1084612 861512 6864616 68bee8 vmlinux.tracepoint 4900252 1057412 861512 6819176 680d68 vmlinux.regs The size went from 6863829 to 6819176, that's a total of 44K in savings. With tracepoints being continuously added, this is critical that the footprint becomes minimal. v5: Added #ifdef CONFIG_PERF_EVENTS around a reference to perf specific structure in trace_events.c. v4: Fixed trace self tests to check probe because regfunc no longer exists. v3: Updated to handle void *data in beginning of probe parameters. Also added the tracepoint: check_trace_callback_type_##call(). v2: Changed the callback probes to pass void * and typecast the value within the function. Acked-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Acked-by: Masami Hiramatsu <mhiramat@redhat.com> Acked-by: Frederic Weisbecker <fweisbec@gmail.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-05-14tracing: Create class struct for eventsSteven Rostedt1-1/+5
This patch creates a ftrace_event_class struct that event structs point to. This class struct will be made to hold information to modify the events. Currently the class struct only holds the events system name. This patch slightly increases the size, but this change lays the ground work of other changes to make the footprint of tracepoints smaller. With 82 standard tracepoints, and 618 system call tracepoints (two tracepoints per syscall: enter and exit): text data bss dec hex filename 4913961 1088356 861512 6863829 68bbd5 vmlinux.orig 4914025 1088868 861512 6864405 68be15 vmlinux.class This patch also cleans up some stale comments in ftrace.h. v2: Fixed missing semi-colon in macro. Acked-by: Frederic Weisbecker <fweisbec@gmail.com> Acked-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Acked-by: Masami Hiramatsu <mhiramat@redhat.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-04-30[SCSI] ftrace: add __print_hex()Kei Tokunaga1-0/+3
__print_hex() prints values in an array in hex (w/o '0x') (space separated) EX) 92 33 32 f3 ee 4d Signed-off-by: Li Zefan <lizf@cn.fujitsu.com> Signed-off-by: Tomohiro Kusumi <kusumi.tomohiro@jp.fujitsu.com> Signed-off-by: Kei Tokunaga <tokunaga.keiich@jp.fujitsu.com> Acked-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-04-01tracing: Show the lost events in the trace_pipe outputSteven Rostedt1-0/+1
Now that the ring buffer can keep track of where events are lost. Use this information to the output of trace_pipe: hackbench-3588 [001] 1326.701660: lock_acquire: ffffffff816591e0 read rcu_read_lock hackbench-3588 [001] 1326.701661: lock_acquire: ffff88003f4091f0 &(&dentry->d_lock)->rlock hackbench-3588 [001] 1326.701664: lock_release: ffff88003f4091f0 &(&dentry->d_lock)->rlock CPU:1 [LOST 673 EVENTS] hackbench-3588 [001] 1326.702711: kmem_cache_free: call_site=ffffffff81102b85 ptr=ffff880026d96738 hackbench-3588 [001] 1326.702712: lock_release: ffff88003e1480a8 &mm->mmap_sem hackbench-3588 [001] 1326.702713: lock_acquire: ffff88003e1480a8 &mm->mmap_sem Even works with the function graph tracer: 2) ! 170.098 us | } 2) 4.036 us | rcu_irq_exit(); 2) 3.657 us | idle_cpu(); 2) ! 190.301 us | } CPU:2 [LOST 2196 EVENTS] 2) 0.853 us | } /* cancel_dirty_page */ 2) | remove_from_page_cache() { 2) 1.578 us | _raw_spin_lock_irq(); 2) | __remove_from_page_cache() { Note, it does not work with the iterator "trace" file, since it requires the use of consuming the page from the ring buffer to determine how many events were lost, which the iterator does not do. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-03-10perf: Drop the obsolete profile naming for trace eventsFrederic Weisbecker1-8/+8
Drop the obsolete "profile" naming used by perf for trace events. Perf can now do more than simple events counting, so generalize the API naming. Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Masami Hiramatsu <mhiramat@redhat.com> Cc: Jason Baron <jbaron@redhat.com>
2010-03-10perf: Take a hot regs snapshot for trace eventsFrederic Weisbecker1-2/+5
We are taking a wrong regs snapshot when a trace event triggers. Either we use get_irq_regs(), which gives us the interrupted registers if we are in an interrupt, or we use task_pt_regs() which gives us the state before we entered the kernel, assuming we are lucky enough to be no kernel thread, in which case task_pt_regs() returns the initial set of regs when the kernel thread was started. What we want is different. We need a hot snapshot of the regs, so that we can get the instruction pointer to record in the sample, the frame pointer for the callchain, and some other things. Let's use the new perf_fetch_caller_regs() for that. Comparison with perf record -e lock: -R -a -f -g Before: perf [kernel] [k] __do_softirq | --- __do_softirq | |--55.16%-- __open | --44.84%-- __write_nocancel After: perf [kernel] [k] perf_tp_event | --- perf_tp_event | |--41.07%-- lock_acquire | | | |--39.36%-- _raw_spin_lock | | | | | |--7.81%-- hrtimer_interrupt | | | smp_apic_timer_interrupt | | | apic_timer_interrupt The old case was producing unreliable callchains. Now having right frame and instruction pointers, we have the trace we want. Also syscalls and kprobe events already have the right regs, let's use them instead of wasting a retrieval. v2: Follow the rename perf_save_regs() -> perf_fetch_caller_regs() Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Masami Hiramatsu <mhiramat@redhat.com> Cc: Jason Baron <jbaron@redhat.com> Cc: Archs <linux-arch@vger.kernel.org>
2010-02-28Merge branch 'perf-core-for-linus' of ↵Linus Torvalds1-4/+16
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (172 commits) perf_event, amd: Fix spinlock initialization perf_event: Fix preempt warning in perf_clock() perf tools: Flush maps on COMM events perf_events, x86: Split PMU definitions into separate files perf annotate: Handle samples not at objdump output addr boundaries perf_events, x86: Remove superflous MSR writes perf_events: Simplify code by removing cpu argument to hw_perf_group_sched_in() perf_events, x86: AMD event scheduling perf_events: Add new start/stop PMU callbacks perf_events: Report the MMAP pgoff value in bytes perf annotate: Defer allocating sym_priv->hist array perf symbols: Improve debugging information about symtab origins perf top: Use a macro instead of a constant variable perf symbols: Check the right return variable perf/scripts: Tag syscall_name helper as not yet available perf/scripts: Add perf-trace-python Documentation perf/scripts: Remove unnecessary PyTuple resizes perf/scripts: Add syscall tracing scripts perf/scripts: Add Python scripting engine perf/scripts: Remove check-perf-trace from listed scripts ... Fix trivial conflict in tools/perf/util/probe-event.c
2010-01-29perf: Factorize trace events raw sample buffer operationsXiao Guangrong1-3/+15
Introduce ftrace_perf_buf_prepare() and ftrace_perf_buf_submit() to gather the common code that operates on raw events sampling buffer. This cleans up redundant code between regular trace events, syscall events and kprobe events. Changelog v1->v2: - Rename function name as per Masami and Frederic's suggestion - Add __kprobes for ftrace_perf_buf_prepare() and make ftrace_perf_buf_submit() inline as per Masami's suggestion - Export ftrace_perf_buf_prepare since modules will use it Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com> Acked-by: Masami Hiramatsu <mhiramat@redhat.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Jason Baron <jbaron@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> LKML-Reference: <4B60E92D.9000808@cn.fujitsu.com> Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
2010-01-06tracing: Remove show_format and related macros from TRACE_EVENTLai Jiangshan1-2/+0
The previous patches added the use of print_fmt string and changes the trace_define_field() function to also create the fields and format output for the event format files. text data bss dec hex filename 5857201 1355780 9336808 16549789 fc879d vmlinux 5884589 1351684 9337896 16574169 fce6d9 vmlinux-orig The above shows the size of the vmlinux after this patch set compared to the vmlinux-orig which is before the patch set. This saves us 27k on text, 1k on bss and adds just 4k of data. The total savings of 24k in size. Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com> LKML-Reference: <4B273D4D.40604@cn.fujitsu.com> Acked-by: Masami Hiramatsu <mhiramat@redhat.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-01-06tracing: Add print_fmt fieldLai Jiangshan1-0/+1
This is part of a patch set that removes the show_format method in the ftrace event macros. The print_fmt field is added to hold the string that shows the print_fmt in the event format files. This patch only adds the field but it is currently not used. Later patches will use this field to enable us to remove the show_format field and function. Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com> LKML-Reference: <4B273D3E.2000704@cn.fujitsu.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-12-28perf events: Remove CONFIG_EVENT_PROFILELi Zefan1-1/+1
Quoted from Ingo: | This reminds me - i think we should eliminate CONFIG_EVENT_PROFILE - | it's an unnecessary Kconfig complication. If both PERF_EVENTS and | EVENT_TRACING is enabled we should expose generic tracepoints. | | Nor is it limited to event 'profiling', so it has become a misnomer as | well. Signed-off-by: Li Zefan <lizf@cn.fujitsu.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Paul Mackerras <paulus@samba.org> LKML-Reference: <4B2F1557.2050705@cn.fujitsu.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-12-13tracing: Change event->profile_count to be int typeLi Zefan1-1/+1
Like total_profile_count, struct ftrace_event_call::profile_count is protected by event_mutex, so it doesn't need to be atomic_t. Signed-off-by: Li Zefan <lizf@cn.fujitsu.com> Acked-by: Steven Rostedt <rostedt@goodmis.org> Cc: Jason Baron <jbaron@redhat.com> Cc: Masami Hiramatsu <mhiramat@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> LKML-Reference: <4B1DC549.5010705@cn.fujitsu.com> Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
2009-12-13tracing: Pull up calls to trace_define_common_fields()Li Zefan1-1/+0
Call trace_define_common_fields() in event_create_dir() only. This avoids trace events to handle it from their define_fields callbacks and shrinks the kernel code size: text data bss dec hex filename 5346802 1961864 7103260 14411926 dbe896 vmlinux.o.old 5345151 1961864 7103260 14410275 dbe223 vmlinux.o Signed-off-by: Li Zefan <lizf@cn.fujitsu.com> Acked-by: Steven Rostedt <rostedt@goodmis.org> Cc: Ingo Molnar <mingo@elte.hu> Cc: Jason Baron <jbaron@redhat.com> Cc: Masami Hiramatsu <mhiramat@redhat.com> LKML-Reference: <4B1DC49C.8000107@cn.fujitsu.com> Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>