summaryrefslogtreecommitdiff
path: root/include/linux/ide.h
AgeCommit message (Collapse)AuthorFilesLines
2021-06-16ide: remove the legacy ide driverChristoph Hellwig1-1623/+0
The legay ide driver has been replace with libata starting in 2003 and has been scheduled for removal for a while. Finally kill it off so that we can start cleaning up various bits of cruft it forced on the block layer. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-11-16ide: remove ide_{,un}register_regionChristoph Hellwig1-3/+0
There is no need to ever register the fake gendisk used for ide-tape. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-09-10ide-gd: stop using the disk events mechanismChristoph Hellwig1-2/+0
ide-gd is only using the disk events mechanism to be able to force an invalidation and partition scan on opening removable media. Just open code the logic without invoving the block layer. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-01-30Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/ideLinus Torvalds1-0/+4
Pull IDE updates from David Miller: 1) Fix mem region name in tx4949ide driver, from Christophe JAILLET. 2) Make drive->dn read only, it should not be changeable by users. From Dan Carpenter. 3) Several cast fixups from Krzysztof Kozlowski. There is also going to be a removal of a now unused IDE driver, but that will come via the MIPS tree. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/ide: ide: make drive->dn read only ide: serverworks: potential overflow in svwks_set_pio_mode() cmd64x: potential buffer overflow in cmd64x_program_timings() ide: remove unneeded header include path to drivers/ide ide: qd65xx: Fix cast to pointer from integer of different size ide: ht6560b: Fix cast to pointer from integer of different size ide: remove set but not used variable 'hwif' ide: remove unnecessary touch_softlockup_watchdog ide: tx4939ide: Fix the name used in a 'devm_request_mem_region()' call ide: Use dev_get_drvdata where possible
2020-01-30ide: make drive->dn read onlyDan Carpenter1-0/+4
The IDE core always sets ->dn correctly so changing it is never required. Setting it to a different value than assigned by IDE core is very likely to result in data corruption (due to wrong transfer timings being set on the controller etc.) Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Tested-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-03compat_ioctl: ide: floppy: add handlerArnd Bergmann1-0/+2
Rather than relying on fs/compat_ioctl.c, this adds support for a compat_ioctl() callback in the ide-floppy driver directly, which lets it translate the scsi commands. Reviewed-by: Ben Hutchings <ben.hutchings@codethink.co.uk> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2019-07-10ide: use BIT() macro for defining bit-flagsAmol Surati1-136/+136
The BIT() macro is available for defining the required bit-flags. Since it operates on an unsigned value and expands to an unsigned result, using it, instead of an expression like (1 << x), also fixes the problem of shifting a signed 32-bit value by 31 bits (e.g. 1 << 31). Signed-off-by: Amol Surati <suratiamol@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-31ide: ensure atapi sense request aren't preemptedJens Axboe1-0/+2
There's an issue with how sense requests are handled in IDE. If ide-cd encounters an error, it queues a sense request. With how IDE request handling is done, this is the next request we need to handle. But it's impossible to guarantee this, as another request could come in between the sense being queued, and ->queue_rq() being run and handling it. If that request ALSO fails, then we attempt to doubly queue the single sense request we have. Since we only support one active request at the time, defer request processing when a sense request is queued. Fixes: 600335205b8d "ide: convert to blk-mq" Reported-by: He Zhe <zhe.he@windriver.com> Tested-by: He Zhe <zhe.he@windriver.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-11-10ide: don't use req->specialChristoph Hellwig1-0/+1
Just replace it with a field of the same name in struct ide_req. Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-11-10ide: cleanup ->prep_rq calling conventionChristoph Hellwig1-1/+1
The return value is just used as a binary yes/no decision, so switch it to a bool instead of the old BLKPREP_* values returned as an int. Also clean up a few related comments. Reviewed-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-11-07ide: convert to blk-mqJens Axboe1-2/+11
ide-disk and ide-cd tested as working just fine, ide-tape and ide-floppy haven't. But the latter don't require changes, so they should work without issue. Add helper function to insert a request from a work queue, since we cannot invoke the blk-mq request insertion from IRQ context. Cc: David Miller <davem@davemloft.net> Reviewed-by: Hannes Reinecke <hare@suse.com> Tested-by: Ming Lei <ming.lei@redhat.com> Reviewed-by: Omar Sandoval <osandov@fb.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-06-04Merge tag 'dma-mapping-4.18' of git://git.infradead.org/users/hch/dma-mappingLinus Torvalds1-2/+0
Pull dma-mapping updates from Christoph Hellwig: - replace the force_dma flag with a dma_configure bus method. (Nipun Gupta, although one patch is іncorrectly attributed to me due to a git rebase bug) - use GFP_DMA32 more agressively in dma-direct. (Takashi Iwai) - remove PCI_DMA_BUS_IS_PHYS and rely on the dma-mapping API to do the right thing for bounce buffering. - move dma-debug initialization to common code, and apply a few cleanups to the dma-debug code. - cleanup the Kconfig mess around swiotlb selection - swiotlb comment fixup (Yisheng Xie) - a trivial swiotlb fix. (Dan Carpenter) - support swiotlb on RISC-V. (based on a patch from Palmer Dabbelt) - add a new generic dma-noncoherent dma_map_ops implementation and use it for arc, c6x and nds32. - improve scatterlist validity checking in dma-debug. (Robin Murphy) - add a struct device quirk to limit the dma-mask to 32-bit due to bridge/system issues, and switch x86 to use it instead of a local hack for VIA bridges. - handle devices without a dma_mask more gracefully in the dma-direct code. * tag 'dma-mapping-4.18' of git://git.infradead.org/users/hch/dma-mapping: (48 commits) dma-direct: don't crash on device without dma_mask nds32: use generic dma_noncoherent_ops nds32: implement the unmap_sg DMA operation nds32: consolidate DMA cache maintainance routines x86/pci-dma: switch the VIA 32-bit DMA quirk to use the struct device flag x86/pci-dma: remove the explicit nodac and allowdac option x86/pci-dma: remove the experimental forcesac boot option Documentation/x86: remove a stray reference to pci-nommu.c core, dma-direct: add a flag 32-bit dma limits dma-mapping: remove unused gfp_t parameter to arch_dma_alloc_attrs dma-debug: check scatterlist segments c6x: use generic dma_noncoherent_ops arc: use generic dma_noncoherent_ops arc: fix arc_dma_{map,unmap}_page arc: fix arc_dma_sync_sg_for_{cpu,device} arc: simplify arc_dma_sync_single_for_{cpu,device} dma-mapping: provide a generic dma-noncoherent implementation dma-mapping: simplify Kconfig dependencies riscv: add swiotlb support riscv: only enable ZONE_DMA32 for 64-bit ...
2018-05-16ide: replace ->proc_fops with ->proc_showChristoph Hellwig1-3/+3
Just set up the show callback in the tty_operations, and use proc_create_single_data to create the file without additional boilerplace code. Signed-off-by: Christoph Hellwig <hch@lst.de>
2018-05-07ide: kill ide_toggle_bounceChristoph Hellwig1-2/+0
ide_toggle_bounce did select various strange block bounce limits, including not bouncing at all as soon as an iommu is present in the system. Given that the dma_map routines now handle any required bounce buffering except for ISA DMA, and the ide code already must handle either ISA DMA or highmem at least for iommu equipped systems we can get rid of the block layer bounce limit setting entirely. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Jens Axboe <axboe@kernel.dk>
2018-04-06Merge tag 'for-4.17/block-20180402' of git://git.kernel.dk/linux-blockLinus Torvalds1-1/+0
Pull block layer updates from Jens Axboe: "It's a pretty quiet round this time, which is nice. This contains: - series from Bart, cleaning up the way we set/test/clear atomic queue flags. - series from Bart, fixing races between gendisk and queue registration and removal. - set of bcache fixes and improvements from various folks, by way of Michael Lyle. - set of lightnvm updates from Matias, most of it being the 1.2 to 2.0 transition. - removal of unused DIO flags from Nikolay. - blk-mq/sbitmap memory ordering fixes from Omar. - divide-by-zero fix for BFQ from Paolo. - minor documentation patches from Randy. - timeout fix from Tejun. - Alpha "can't write a char atomically" fix from Mikulas. - set of NVMe fixes by way of Keith. - bsg and bsg-lib improvements from Christoph. - a few sed-opal fixes from Jonas. - cdrom check-disk-change deadlock fix from Maurizio. - various little fixes, comment fixes, etc from various folks" * tag 'for-4.17/block-20180402' of git://git.kernel.dk/linux-block: (139 commits) blk-mq: Directly schedule q->timeout_work when aborting a request blktrace: fix comment in blktrace_api.h lightnvm: remove function name in strings lightnvm: pblk: remove some unnecessary NULL checks lightnvm: pblk: don't recover unwritten lines lightnvm: pblk: implement 2.0 support lightnvm: pblk: implement get log report chunk lightnvm: pblk: rename ppaf* to addrf* lightnvm: pblk: check for supported version lightnvm: implement get log report chunk helpers lightnvm: make address conversions depend on generic device lightnvm: add support for 2.0 address format lightnvm: normalize geometry nomenclature lightnvm: complete geo structure with maxoc* lightnvm: add shorten OCSSD version in geo lightnvm: add minor version to generic geometry lightnvm: simplify geometry structure lightnvm: pblk: refactor init/exit sequences lightnvm: Avoid validation of default op value lightnvm: centralize permission check for lightnvm ioctl ...
2018-03-26treewide: simplify Kconfig dependencies for removed archsArnd Bergmann1-6/+1
A lot of Kconfig symbols have architecture specific dependencies. In those cases that depend on architectures we have already removed, they can be omitted. Acked-by: Kalle Valo <kvalo@codeaurora.org> Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2018-03-17block: Move SECTOR_SIZE and SECTOR_SHIFT definitions into <linux/blkdev.h>Bart Van Assche1-1/+0
It happens often while I'm preparing a patch for a block driver that I'm wondering: is a definition of SECTOR_SIZE and/or SECTOR_SHIFT available for this driver? Do I have to introduce definitions of these constants before I can use these constants? To avoid this confusion, move the existing definitions of SECTOR_SIZE and SECTOR_SHIFT into the <linux/blkdev.h> header file such that these become available for all block drivers. Make the SECTOR_SIZE definition in the uapi msdos_fs.h header file conditional to avoid that including that header file after <linux/blkdev.h> causes the compiler to complain about a SECTOR_SIZE redefinition. Note: the SECTOR_SIZE / SECTOR_SHIFT / SECTOR_BITS definitions have not been removed from uapi header files nor from NAND drivers in which these constants are used for another purpose than converting block layer offsets and sizes into a number of sectors. Cc: David S. Miller <davem@davemloft.net> Cc: Mike Snitzer <snitzer@redhat.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Nitin Gupta <ngupta@vflare.org> Reviewed-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-03-10mn10300: Remove the architectureDavid Howells1-1/+1
Remove the MN10300 arch as the hardware is defunct. Suggested-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David Howells <dhowells@redhat.com> cc: Masahiro Yamada <yamada.masahiro@socionext.com> cc: linux-am33-list@redhat.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2017-11-14Merge branch 'timers-core-for-linus' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull timer updates from Thomas Gleixner: "Yet another big pile of changes: - More year 2038 work from Arnd slowly reaching the point where we need to think about the syscalls themself. - A new timer function which allows to conditionally (re)arm a timer only when it's either not running or the new expiry time is sooner than the armed expiry time. This allows to use a single timer for multiple timeout requirements w/o caring about the first expiry time at the call site. - A new NMI safe accessor to clock real time for the printk timestamp work. Can be used by tracing, perf as well if required. - A large number of timer setup conversions from Kees which got collected here because either maintainers requested so or they simply got ignored. As Kees pointed out already there are a few trivial merge conflicts and some redundant commits which was unavoidable due to the size of this conversion effort. - Avoid a redundant iteration in the timer wheel softirq processing. - Provide a mechanism to treat RTC implementations depending on their hardware properties, i.e. don't inflict the write at the 0.5 seconds boundary which originates from the PC CMOS RTC to all RTCs. No functional change as drivers need to be updated separately. - The usual small updates to core code clocksource drivers. Nothing really exciting" * 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (111 commits) timers: Add a function to start/reduce a timer pstore: Use ktime_get_real_fast_ns() instead of __getnstimeofday() timer: Prepare to change all DEFINE_TIMER() callbacks netfilter: ipvs: Convert timers to use timer_setup() scsi: qla2xxx: Convert timers to use timer_setup() block/aoe: discover_timer: Convert timers to use timer_setup() ide: Convert timers to use timer_setup() drbd: Convert timers to use timer_setup() mailbox: Convert timers to use timer_setup() crypto: Convert timers to use timer_setup() drivers/pcmcia: omap1: Fix error in automated timer conversion ARM: footbridge: Fix typo in timer conversion drivers/sgi-xp: Convert timers to use timer_setup() drivers/pcmcia: Convert timers to use timer_setup() drivers/memstick: Convert timers to use timer_setup() drivers/macintosh: Convert timers to use timer_setup() hwrng/xgene-rng: Convert timers to use timer_setup() auxdisplay: Convert timers to use timer_setup() sparc/led: Convert timers to use timer_setup() mips: ip22/32: Convert timers to use timer_setup() ...
2017-11-06ide: Convert timers to use timer_setup()Kees Cook1-1/+1
In preparation for unconditionally passing the struct timer_list pointer to all timer callbacks, switch to using the new timer_setup() and from_timer() to pass the timer pointer explicitly. Cc: "David S. Miller" <davem@davemloft.net> Cc: linux-ide@vger.kernel.org Signed-off-by: Kees Cook <keescook@chromium.org>
2017-11-02License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseGreg Kroah-Hartman1-0/+1
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-06-09block: introduce new block status code typeChristoph Hellwig1-3/+3
Currently we use nornal Linux errno values in the block layer, and while we accept any error a few have overloaded magic meanings. This patch instead introduces a new blk_status_t value that holds block layer specific status codes and explicitly explains their meaning. Helpers to convert from and to the previous special meanings are provided for now, but I suspect we want to get rid of them in the long run - those drivers that have a errno input (e.g. networking) usually get errnos that don't know about the special block layer overloads, and similarly returning them to userspace will usually return somethings that strictly speaking isn't correct for file system operations, but that's left as an exercise for later. For now the set of errors is a very limited set that closely corresponds to the previous overloaded errno values, but there is some low hanging fruite to improve it. blk_status_t (ab)uses the sparse __bitwise annotations to allow for sparse typechecking, so that we can easily catch places passing the wrong values. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-04-20scsi: introduce a result field in struct scsi_requestChristoph Hellwig1-1/+1
This passes on the scsi_cmnd result field to users of passthrough requests. Currently we abuse req->errors for this purpose, but that field will go away in its current form. Note that the old IDE code abuses the errors field in very creative ways and stores all kinds of different values in it. I didn't dare to touch this magic, so the abuses are brought forward 1:1. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Reviewed-by: Bart Van Assche <Bart.VanAssche@sandisk.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-02-01block: fold cmd_type into the REQ_OP_ spaceChristoph Hellwig1-9/+5
Instead of keeping two levels of indirection for requests types, fold it all into the operations. The little caveat here is that previously cmd_type only applied to struct request, while the request and bio op fields were set to plain REQ_OP_READ/WRITE even for passthrough operations. Instead this patch adds new REQ_OP_* for SCSI passthrough and driver private requests, althought it has to add two for each so that we can communicate the data in/out nature of the request. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-02-01ide: don't abuse cmd_typeChristoph Hellwig1-11/+45
Currently the legacy ide driver defines several request types of it's own, which is in the way of removing that field entirely. Instead add a type field to struct ide_request and use that to distinguish the different types of IDE-internal requests. It's a bit of a mess, but so is the surrounding code.. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: David S. Miller <davem@davemloft.net> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-01-28block: split scsi_request out of struct requestChristoph Hellwig1-1/+7
And require all drivers that want to support BLOCK_PC to allocate it as the first thing of their private data. To support this the legacy IDE and BSG code is switched to set cmd_size on their queues to let the block layer allocate the additional space. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@fb.com>
2015-05-05block: move PM request support to IDEChristoph Hellwig1-0/+19
This removes the request types and hacks from the block code and into the old IDE driver. There is a small amunt of code duplication due to this, but it's not too bad. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@fb.com>
2015-05-05block: move REQ_TYPE_SENSE to the ide driverChristoph Hellwig1-0/+1
Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@fb.com>
2015-05-05block: move REQ_TYPE_ATA_TASKFILE and REQ_TYPE_ATA_PC to ide.hChristoph Hellwig1-0/+7
These values are only used by the IDE driver, so move them into it by allowing drivers to take cmd_type values after the first private one. Note that we have to turn cmd_type into a plain unsigned integer so that gcc doesn't complain about mismatching enum types. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@fb.com>
2013-12-07ACPI: Clean up inclusions of ACPI header filesLv Zheng1-6/+2
Replace direct inclusions of <acpi/acpi.h>, <acpi/acpi_bus.h> and <acpi/acpi_drivers.h>, which are incorrect, with <linux/acpi.h> inclusions and remove some inclusions of those files that aren't necessary. First of all, <acpi/acpi.h>, <acpi/acpi_bus.h> and <acpi/acpi_drivers.h> should not be included directly from any files that are built for CONFIG_ACPI unset, because that generally leads to build warnings about undefined symbols in !CONFIG_ACPI builds. For CONFIG_ACPI set, <linux/acpi.h> includes those files and for CONFIG_ACPI unset it provides stub ACPI symbols to be used in that case. Second, there are ordering dependencies between those files that always have to be met. Namely, it is required that <acpi/acpi_bus.h> be included prior to <acpi/acpi_drivers.h> so that the acpi_pci_root declarations the latter depends on are always there. And <acpi/acpi.h> which provides basic ACPICA type declarations should always be included prior to any other ACPI headers in CONFIG_ACPI builds. That also is taken care of including <linux/acpi.h> as appropriate. Signed-off-by: Lv Zheng <lv.zheng@intel.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Matthew Garrett <mjg59@srcf.ucam.org> Cc: Tony Luck <tony.luck@intel.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com> (drivers/pci stuff) Acked-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> (Xen stuff) Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-10-17ide: convert bus code to use dev_groupsGreg Kroah-Hartman1-1/+1
The dev_attrs field of struct bus_type is going away soon, dev_groups should be used instead. This converts the ide bus code to use the correct field. Acked-by: David S. Miller <davem@davemloft.net> Cc: <linux-ide@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-03-29Merge tag 'split-asm_system_h-for-linus-20120328' of ↵Linus Torvalds1-1/+0
git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-asm_system Pull "Disintegrate and delete asm/system.h" from David Howells: "Here are a bunch of patches to disintegrate asm/system.h into a set of separate bits to relieve the problem of circular inclusion dependencies. I've built all the working defconfigs from all the arches that I can and made sure that they don't break. The reason for these patches is that I recently encountered a circular dependency problem that came about when I produced some patches to optimise get_order() by rewriting it to use ilog2(). This uses bitops - and on the SH arch asm/bitops.h drags in asm-generic/get_order.h by a circuituous route involving asm/system.h. The main difficulty seems to be asm/system.h. It holds a number of low level bits with no/few dependencies that are commonly used (eg. memory barriers) and a number of bits with more dependencies that aren't used in many places (eg. switch_to()). These patches break asm/system.h up into the following core pieces: (1) asm/barrier.h Move memory barriers here. This already done for MIPS and Alpha. (2) asm/switch_to.h Move switch_to() and related stuff here. (3) asm/exec.h Move arch_align_stack() here. Other process execution related bits could perhaps go here from asm/processor.h. (4) asm/cmpxchg.h Move xchg() and cmpxchg() here as they're full word atomic ops and frequently used by atomic_xchg() and atomic_cmpxchg(). (5) asm/bug.h Move die() and related bits. (6) asm/auxvec.h Move AT_VECTOR_SIZE_ARCH here. Other arch headers are created as needed on a per-arch basis." Fixed up some conflicts from other header file cleanups and moving code around that has happened in the meantime, so David's testing is somewhat weakened by that. We'll find out anything that got broken and fix it.. * tag 'split-asm_system_h-for-linus-20120328' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-asm_system: (38 commits) Delete all instances of asm/system.h Remove all #inclusions of asm/system.h Add #includes needed to permit the removal of asm/system.h Move all declarations of free_initmem() to linux/mm.h Disintegrate asm/system.h for OpenRISC Split arch_align_stack() out from asm-generic/system.h Split the switch_to() wrapper out of asm-generic/system.h Move the asm-generic/system.h xchg() implementation to asm-generic/cmpxchg.h Create asm-generic/barrier.h Make asm-generic/cmpxchg.h #include asm-generic/cmpxchg-local.h Disintegrate asm/system.h for Xtensa Disintegrate asm/system.h for Unicore32 [based on ver #3, changed by gxt] Disintegrate asm/system.h for Tile Disintegrate asm/system.h for Sparc Disintegrate asm/system.h for SH Disintegrate asm/system.h for Score Disintegrate asm/system.h for S390 Disintegrate asm/system.h for PowerPC Disintegrate asm/system.h for PA-RISC Disintegrate asm/system.h for MN10300 ...
2012-03-28Remove all #inclusions of asm/system.hDavid Howells1-1/+0
Remove all #inclusions of asm/system.h preparatory to splitting and killing it. Performed with the following command: perl -p -i -e 's!^#\s*include\s*<asm/system[.]h>.*\n!!' `grep -Irl '^#\s*include\s*<asm/system[.]h>' *` Signed-off-by: David Howells <dhowells@redhat.com>
2012-03-16device.h: audit and cleanup users in main include dirPaul Gortmaker1-1/+2
The <linux/device.h> header includes a lot of stuff, and it in turn gets a lot of use just for the basic "struct device" which appears so often. Clean up the users as follows: 1) For those headers only needing "struct device" as a pointer in fcn args, replace the include with exactly that. 2) For headers not really using anything from device.h, simply delete the include altogether. 3) For headers relying on getting device.h implicitly before being included themselves, now explicitly include device.h 4) For files in which doing #1 or #2 uncovers an implicit dependency on some other header, fix by explicitly adding the required header(s). Any C files that were implicitly relying on device.h to be present have already been dealt with in advance. Total removals from #1 and #2: 51. Total additions coming from #3: 9. Total other implicit dependencies from #4: 7. As of 3.3-rc1, there were 110, so a net removal of 42 gives about a 38% reduction in device.h presence in include/* Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2012-01-04switch procfs to umode_t useAl Viro1-1/+1
both proc_dir_entry ->mode and populating functions Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2011-05-09ide: Use linux/mutex.hAnton Blanchard1-1/+1
The IDE code is still including asm/mutex.h instead of linux/mutex.h Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-16Merge branch 'master' into for-nextJiri Kosina1-3/+3
2010-06-16fix typos concerning "management"Uwe Kleine-König1-1/+1
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-05-24Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/ide-2.6Linus Torvalds1-2/+2
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/ide-2.6: cmd640: fix kernel oops in test_irq() method pdc202xx_old: ignore "FIFO empty" bit in test_irq() method pdc202xx_old: wire test_irq() method for PDC2026x IDE: pass IRQ flags to the IDE core ide: fix comment typo in ide.h
2010-05-21block,ide: simplify bdops->set_capacity() to ->unlock_native_capacity()Tejun Heo1-1/+1
bdops->set_capacity() is unnecessarily generic. All that's required is a simple one way notification to lower level driver telling it to try to unlock native capacity. There's no reason to pass in target capacity or return the new capacity. The former is always the inherent native capacity and the latter can be handled via the usual device resize / revalidation path. In fact, the current API is always used that way. Replace ->set_capacity() with ->unlock_native_capacity() which take only @disk and doesn't return anything. IDE which is the only current user of the API is converted accordingly. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Ben Hutchings <ben@decadent.org.uk> Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Acked-by: David S. Miller <davem@davemloft.net> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2010-04-15ide: fix comment typo in ide.hSergei Shtylyov1-2/+2
Fix typo in the comment to the 'dma_mode' field of the 'struct ide_drive_s' introduced by the commit 3fccaa192b9501e79a57e02e62b6bf420d2b461e (ide: add drive->dma_mode field). Whilt at it, convert spaces to a tab in the declaration of the neighbouring 'dn' field... Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-01ide: Requeue request after DMA timeoutHerbert Xu1-0/+1
I noticed that my KVM virtual machines were experiencing IDE issues resulting in processes stuck on waiting for buffers to complete. The root cause is of course race conditions in the ancient qemu backend that I'm using. However, the fact that the guest isn't recovering is a bug. I've tracked it down to the change made last year to dequeue requests at the start rather than at the end in the IDE layer. commit 8f6205cd572fece673da0255d74843680f67f879 Author: Tejun Heo <tj@kernel.org> Date: Fri May 8 11:53:59 2009 +0900 ide: dequeue in-flight request The problem is that the function ide_dma_timeout_retry does not requeue the current request, causing one request to be lost for each DMA timeout. This patch fixes this by requeueing the request. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-19ide: make ide_get_best_pio_mode() staticBartlomiej Zolnierkiewicz1-1/+0
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-19ide: change ->set_dma_mode method parametersBartlomiej Zolnierkiewicz1-1/+1
Change ->set_dma_mode method parameters to match ->set_dmamode method used in struct ata_port_operations. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2010-01-19ide: change ->set_pio_mode method parametersBartlomiej Zolnierkiewicz1-1/+1
Change ->set_pio_mode method parameters to match ->set_piomode method used in struct ata_port_operations. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-19ide: add drive->dma_mode fieldBartlomiej Zolnierkiewicz1-0/+1
Add dma_mode field to ide_drive_t matching dma_mode field used in struct ata_device. The validity of the field is restricted to ->dma_pio_mode method only currently in IDE subsystem. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-19ide: add drive->pio_mode fieldBartlomiej Zolnierkiewicz1-0/+1
Add pio_mode field to ide_drive_t matching pio_mode field used in struct ata_device. The validity of the field is restricted to ->set_pio_mode method only currently in IDE subsystem. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-12-03ide: Increase WAIT_DRQ to accomodate some CF cards and SSD drives.David S. Miller1-2/+2
Based upon a patch by Philippe De Muyter, and feedback from Mark Lord and Robert Hancock. As noted by Mark Lord, the outdated ATA1 spec specifies a 20msec timeout for setting DRQ but lots of common devices overshoot this. Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-02ide: convert to ->proc_fopsAlexey Dobriyan1-21/+3
->read_proc, ->write_proc are going away, ->proc_fops should be used instead. The only tricky place is IDENTIFY handling: if for some reason taskfile_lib_get_identify() fails, buffer _is_ changed and at least first byte is overwritten. Emulate old behaviour with returning that first byte to userspace and reporting length=1 despite overall -E. Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-07ide: fix races in handling of user-space SET XFER commandsBartlomiej Zolnierkiewicz1-1/+2
* Make cmd->tf_flags field 'u16' and add IDE_TFLAG_SET_XFER taskfile flag. * Update ide_finish_cmd() to set xfer / re-read id if the new flag is set. * Convert set_xfer_rate() (write handler for /proc/ide/hd?/current_speed) and ide_cmd_ioctl() (HDIO_DRIVE_CMD ioctl handler) to use the new flag. * Remove no longer needed disable_irq_nosync() + enable_irq() from ide_config_drive_speed(). Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>