summaryrefslogtreecommitdiff
path: root/include/linux/ipv6.h
AgeCommit message (Collapse)AuthorFilesLines
2017-12-21net: reevalulate autoflowlabel setting after sysctl settingShaohua Li1-1/+2
sysctl.ip6.auto_flowlabels is default 1. In our hosts, we set it to 2. If sockopt doesn't set autoflowlabel, outcome packets from the hosts are supposed to not include flowlabel. This is true for normal packet, but not for reset packet. The reason is ipv6_pinfo.autoflowlabel is set in sock creation. Later if we change sysctl.ip6.auto_flowlabels, the ipv6_pinfo.autoflowlabel isn't changed, so the sock will keep the old behavior in terms of auto flowlabel. Reset packet is suffering from this problem, because reset packet is sent from a special control socket, which is created at boot time. Since sysctl.ipv6.auto_flowlabels is 1 by default, the control socket will always have its ipv6_pinfo.autoflowlabel set, even after user set sysctl.ipv6.auto_flowlabels to 1, so reset packset will always have flowlabel. Normal sock created before sysctl setting suffers from the same issue. We can't even turn off autoflowlabel unless we kill all socks in the hosts. To fix this, if IPV6_AUTOFLOWLABEL sockopt is used, we use the autoflowlabel setting from user, otherwise we always call ip6_default_np_autolabel() which has the new settings of sysctl. Note, this changes behavior a little bit. Before commit 42240901f7c4 (ipv6: Implement different admin modes for automatic flow labels), the autoflowlabel behavior of a sock isn't sticky, eg, if sysctl changes, existing connection will change autoflowlabel behavior. After that commit, autoflowlabel behavior is sticky in the whole life of the sock. With this patch, the behavior isn't sticky again. Cc: Martin KaFai Lau <kafai@fb.com> Cc: Eric Dumazet <eric.dumazet@gmail.com> Cc: Tom Herbert <tom@quantonium.net> Signed-off-by: Shaohua Li <shli@fb.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-11net: ipv6: sysctl to specify IPv6 ND traffic classMaciej Żenczykowski1-0/+1
Add a per-device sysctl to specify the default traffic class to use for kernel originated IPv6 Neighbour Discovery packets. Currently this includes: - Router Solicitation (ICMPv6 type 133) ndisc_send_rs() -> ndisc_send_skb() -> ip6_nd_hdr() - Neighbour Solicitation (ICMPv6 type 135) ndisc_send_ns() -> ndisc_send_skb() -> ip6_nd_hdr() - Neighbour Advertisement (ICMPv6 type 136) ndisc_send_na() -> ndisc_send_skb() -> ip6_nd_hdr() - Redirect (ICMPv6 type 137) ndisc_send_redirect() -> ndisc_send_skb() -> ip6_nd_hdr() and if the kernel ever gets around to generating RA's, it would presumably also include: - Router Advertisement (ICMPv6 type 134) (radvd daemon could pick up on the kernel setting and use it) Interface drivers may examine the Traffic Class value and translate the DiffServ Code Point into a link-layer appropriate traffic prioritization scheme. An example of mapping IETF DSCP values to IEEE 802.11 User Priority values can be found here: https://tools.ietf.org/html/draft-ietf-tsvwg-ieee-802-11 The expected primary use case is to properly prioritize ND over wifi. Testing: jzem22:~# cat /proc/sys/net/ipv6/conf/eth0/ndisc_tclass 0 jzem22:~# echo -1 > /proc/sys/net/ipv6/conf/eth0/ndisc_tclass -bash: echo: write error: Invalid argument jzem22:~# echo 256 > /proc/sys/net/ipv6/conf/eth0/ndisc_tclass -bash: echo: write error: Invalid argument jzem22:~# echo 0 > /proc/sys/net/ipv6/conf/eth0/ndisc_tclass jzem22:~# echo 255 > /proc/sys/net/ipv6/conf/eth0/ndisc_tclass jzem22:~# cat /proc/sys/net/ipv6/conf/eth0/ndisc_tclass 255 jzem22:~# echo 34 > /proc/sys/net/ipv6/conf/eth0/ndisc_tclass jzem22:~# cat /proc/sys/net/ipv6/conf/eth0/ndisc_tclass 34 jzem22:~# echo $[0xDC] > /proc/sys/net/ipv6/conf/eth0/ndisc_tclass jzem22:~# tcpdump -v -i eth0 icmp6 and src host jzem22.pgc and dst host fe80::1 tcpdump: listening on eth0, link-type EN10MB (Ethernet), capture size 262144 bytes IP6 (class 0xdc, hlim 255, next-header ICMPv6 (58) payload length: 24) jzem22.pgc > fe80::1: [icmp6 sum ok] ICMP6, neighbor advertisement, length 24, tgt is jzem22.pgc, Flags [solicited] (based on original change written by Erik Kline, with minor changes) v2: fix 'suspicious rcu_dereference_check() usage' by explicitly grabbing the rcu_read_lock. Cc: Lorenzo Colitti <lorenzo@google.com> Signed-off-by: Erik Kline <ek@google.com> Signed-off-by: Maciej Żenczykowski <maze@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-02License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseGreg Kroah-Hartman1-0/+1
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-08-07net: ipv6: add second dif to udp socket lookupsDavid Ahern1-0/+10
Add a second device index, sdif, to udp socket lookups. sdif is the index for ingress devices enslaved to an l3mdev. It allows the lookups to consider the enslaved device as well as the L3 domain when searching for a socket. Early demux lookups are handled in the next patch as part of INET_MATCH changes. Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-01udp6: fix jumbogram receptionPaolo Abeni1-0/+6
Since commit 67a51780aebb ("ipv6: udp: leverage scratch area helpers") udp6_recvmsg() read the skb len from the scratch area, to avoid a cache miss. But the UDP6 rx path support RFC 2675 UDPv6 jumbograms, and their length exceeds the 16 bits available in the scratch area. As a side effect the length returned by recvmsg() is: <ingress datagram len> % (1<<16) This commit addresses the issue allocating one more bit in the IP6CB flags field and setting it for incoming jumbograms. Such field is still in the first cacheline, so at recvmsg() time we can check it and fallback to access skb->len if required, without a measurable overhead. Fixes: 67a51780aebb ("ipv6: udp: leverage scratch area helpers") Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-23net: ipv6: Add sysctl for minimum prefix len acceptable in RIOs.Joel Scherpelz1-0/+1
This commit adds a new sysctl accept_ra_rt_info_min_plen that defines the minimum acceptable prefix length of Route Information Options. The new sysctl is intended to be used together with accept_ra_rt_info_max_plen to configure a range of acceptable prefix lengths. It is useful to prevent misconfigurations from unintentionally blackholing too much of the IPv6 address space (e.g., home routers announcing RIOs for fc00::/7, which is incorrect). Signed-off-by: Joel Scherpelz <jscherpelz@google.com> Acked-by: Lorenzo Colitti <lorenzo@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-07ipv6: Provide ipv6 version of "disable_policy" sysctlDavid Forster1-0/+1
This provides equivalent functionality to the existing ipv4 "disable_policy" systcl. ie. Allows IPsec processing to be skipped on terminating packets on a per-interface basis. Signed-off-by: David Forster <dforster@brocade.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-27net/ipv6: allow sysctl to change link-local address generation modeFelix Jia1-0/+1
The address generation mode for IPv6 link-local can only be configured by netlink messages. This patch adds the ability to change the address generation mode via sysctl. v1 -> v2 Removed the rtnl lock and switch to use RCU lock to iterate through the netdev list. v2 -> v3 Removed the addrgenmode variable from the idev structure and use the systcl storage for the flag. Simplifed the logic for sysctl handling by removing the supported for all operation. Added support for more types of tunnel interfaces for link-local address generation. Based the patches from net-next. v3 -> v4 Removed unnecessary whitespace changes. Signed-off-by: Felix Jia <felix.jia@alliedtelesis.co.nz> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-04ipv6 addrconf: Implemented enhanced DAD (RFC7527)Erik Nordmark1-0/+1
Implemented RFC7527 Enhanced DAD. IPv6 duplicate address detection can fail if there is some temporary loopback of Ethernet frames. RFC7527 solves this by including a random nonce in the NS messages used for DAD, and if an NS is received with the same nonce it is assumed to be a looped back DAD probe and is ignored. RFC7527 is enabled by default. Can be disabled by setting both of conf/{all,interface}/enhanced_dad to zero. Signed-off-by: Erik Nordmark <nordmark@arista.com> Signed-off-by: Bob Gilligan <gilligan@arista.com> Reviewed-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-15Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-1/+1
Several cases of bug fixes in 'net' overlapping other changes in 'net-next-. Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-10ipv6: sr: add core files for SR HMAC supportDavid Lebrun1-0/+3
This patch adds the necessary functions to compute and check the HMAC signature of an SR-enabled packet. Two HMAC algorithms are supported: hmac(sha1) and hmac(sha256). In order to avoid dynamic memory allocation for each HMAC computation, a per-cpu ring buffer is allocated for this purpose. A new per-interface sysctl called seg6_require_hmac is added, allowing a user-defined policy for processing HMAC-signed SR-enabled packets. A value of -1 means that the HMAC field will always be ignored. A value of 0 means that if an HMAC field is present, its validity will be enforced (the packet is dropped is the signature is incorrect). Finally, a value of 1 means that any SR-enabled packet that does not contain an HMAC signature or whose signature is incorrect will be dropped. Signed-off-by: David Lebrun <david.lebrun@uclouvain.be> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-10ipv6: implement dataplane support for rthdr type 4 (Segment Routing Header)David Lebrun1-0/+1
Implement minimal support for processing of SR-enabled packets as described in https://tools.ietf.org/html/draft-ietf-6man-segment-routing-header-02. This patch implements the following operations: - Intermediate segment endpoint: incrementation of active segment and rerouting. - Egress for SR-encapsulated packets: decapsulation of outer IPv6 header + SRH and routing of inner packet. - Cleanup flag support for SR-inlined packets: removal of SRH if we are the penultimate segment endpoint. A per-interface sysctl seg6_enabled is provided, to accept/deny SR-enabled packets. Default is deny. This patch does not provide support for HMAC-signed packets. Signed-off-by: David Lebrun <david.lebrun@uclouvain.be> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-03net: tcp: check skb is non-NULL for exact match on lookupsDavid Ahern1-1/+1
Andrey reported the following error report while running the syzkaller fuzzer: general protection fault: 0000 [#1] SMP KASAN Dumping ftrace buffer: (ftrace buffer empty) Modules linked in: CPU: 0 PID: 648 Comm: syz-executor Not tainted 4.9.0-rc3+ #333 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011 task: ffff8800398c4480 task.stack: ffff88003b468000 RIP: 0010:[<ffffffff83091106>] [< inline >] inet_exact_dif_match include/net/tcp.h:808 RIP: 0010:[<ffffffff83091106>] [<ffffffff83091106>] __inet_lookup_listener+0xb6/0x500 net/ipv4/inet_hashtables.c:219 RSP: 0018:ffff88003b46f270 EFLAGS: 00010202 RAX: 0000000000000004 RBX: 0000000000004242 RCX: 0000000000000001 RDX: 0000000000000000 RSI: ffffc90000e3c000 RDI: 0000000000000054 RBP: ffff88003b46f2d8 R08: 0000000000004000 R09: ffffffff830910e7 R10: 0000000000000000 R11: 000000000000000a R12: ffffffff867fa0c0 R13: 0000000000004242 R14: 0000000000000003 R15: dffffc0000000000 FS: 00007fb135881700(0000) GS:ffff88003ec00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000020cc3000 CR3: 000000006d56a000 CR4: 00000000000006f0 Stack: 0000000000000000 000000000601a8c0 0000000000000000 ffffffff00004242 424200003b9083c2 ffff88003def4041 ffffffff84e7e040 0000000000000246 ffff88003a0911c0 0000000000000000 ffff88003a091298 ffff88003b9083ae Call Trace: [<ffffffff831100f4>] tcp_v4_send_reset+0x584/0x1700 net/ipv4/tcp_ipv4.c:643 [<ffffffff83115b1b>] tcp_v4_rcv+0x198b/0x2e50 net/ipv4/tcp_ipv4.c:1718 [<ffffffff83069d22>] ip_local_deliver_finish+0x332/0xad0 net/ipv4/ip_input.c:216 ... MD5 has a code path that calls __inet_lookup_listener with a null skb, so inet{6}_exact_dif_match needs to check skb against null before pulling the flag. Fixes: a04a480d4392 ("net: Require exact match for TCP socket lookups if dif is l3mdev") Reported-by: Andrey Konovalov <andreyknvl@google.com> Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Tested-by: Andrey Konovalov <andreyknvl@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-03ipv6: add IPV6_RECVFRAGSIZE cmsgWillem de Bruijn1-2/+3
When reading a datagram or raw packet that arrived fragmented, expose the maximum fragment size if recorded to allow applications to estimate receive path MTU. At this point, the field is only recorded when ipv6 connection tracking is enabled. A follow-up patch will record this field also in the ipv6 input path. Tested using the test for IP_RECVFRAGSIZE plus ip netns exec to ip addr add dev veth1 fc07::1/64 ip netns exec from ip addr add dev veth0 fc07::2/64 ip netns exec to ./recv_cmsg_recvfragsize -6 -u -p 6000 & ip netns exec from nc -q 1 -u fc07::1 6000 < payload Both with and without enabling connection tracking ip6tables -A INPUT -m state --state NEW -p udp -j LOG Signed-off-by: Willem de Bruijn <willemb@google.com> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-17net: Require exact match for TCP socket lookups if dif is l3mdevDavid Ahern1-3/+14
Currently, socket lookups for l3mdev (vrf) use cases can match a socket that is bound to a port but not a device (ie., a global socket). If the sysctl tcp_l3mdev_accept is not set this leads to ack packets going out based on the main table even though the packet came in from an L3 domain. The end result is that the connection does not establish creating confusion for users since the service is running and a socket shows in ss output. Fix by requiring an exact dif to sk_bound_dev_if match if the skb came through an interface enslaved to an l3mdev device and the tcp_l3mdev_accept is not set. skb's through an l3mdev interface are marked by setting a flag in inet{6}_skb_parm. The IPv6 variant is already set; this patch adds the flag for IPv4. Using an skb flag avoids a device lookup on the dif. The flag is set in the VRF driver using the IP{6}CB macros. For IPv4, the inet_skb_parm struct is moved in the cb per commit 971f10eca186, so the match function in the TCP stack needs to use TCP_SKB_CB. For IPv6, the move is done after the socket lookup, so IP6CB is used. The flags field in inet_skb_parm struct needs to be increased to add another flag. There is currently a 1-byte hole following the flags, so it can be expanded to u16 without increasing the size of the struct. Fixes: 193125dbd8eb ("net: Introduce VRF device driver") Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-30ipv6 addrconf: implement RFC7559 router solicitation backoffMaciej Żenczykowski1-0/+1
This implements: https://tools.ietf.org/html/rfc7559 Backoff is performed according to RFC3315 section 14: https://tools.ietf.org/html/rfc3315#section-14 We allow setting /proc/sys/net/ipv6/conf/*/router_solicitations to a negative value meaning an unlimited number of retransmits, and we make this the new default (inline with the RFC). We also add a new setting: /proc/sys/net/ipv6/conf/*/router_solicitation_max_interval defaulting to 1 hour (per RFC recommendation). Signed-off-by: Maciej Żenczykowski <maze@google.com> Acked-by: Erik Kline <ek@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-10net: vrf: Fix crash when IPv6 is disabled at boot timeDavid Ahern1-0/+7
Frank Kellermann reported a kernel crash with 4.5.0 when IPv6 is disabled at boot using the kernel option ipv6.disable=1. Using current net-next with the boot option: $ ip link add red type vrf table 1001 Generates: [12210.919584] BUG: unable to handle kernel NULL pointer dereference at 0000000000000748 [12210.921341] IP: [<ffffffff814b30e3>] fib6_get_table+0x2c/0x5a [12210.922537] PGD b79e3067 PUD bb32b067 PMD 0 [12210.923479] Oops: 0000 [#1] SMP [12210.924001] Modules linked in: ipvlan 8021q garp mrp stp llc [12210.925130] CPU: 3 PID: 1177 Comm: ip Not tainted 4.7.0-rc1+ #235 [12210.926168] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.7.5-20140531_083030-gandalf 04/01/2014 [12210.928065] task: ffff8800b9ac4640 ti: ffff8800bacac000 task.ti: ffff8800bacac000 [12210.929328] RIP: 0010:[<ffffffff814b30e3>] [<ffffffff814b30e3>] fib6_get_table+0x2c/0x5a [12210.930697] RSP: 0018:ffff8800bacaf888 EFLAGS: 00010202 [12210.931563] RAX: 0000000000000748 RBX: ffffffff81a9e280 RCX: ffff8800b9ac4e28 [12210.932688] RDX: 00000000000000e9 RSI: 0000000000000002 RDI: 0000000000000286 [12210.933820] RBP: ffff8800bacaf898 R08: ffff8800b9ac4df0 R09: 000000000052001b [12210.934941] R10: 00000000657c0000 R11: 000000000000c649 R12: 00000000000003e9 [12210.936032] R13: 00000000000003e9 R14: ffff8800bace7800 R15: ffff8800bb3ec000 [12210.937103] FS: 00007faa1766c700(0000) GS:ffff88013ac00000(0000) knlGS:0000000000000000 [12210.938321] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [12210.939166] CR2: 0000000000000748 CR3: 00000000b79d6000 CR4: 00000000000406e0 [12210.940278] Stack: [12210.940603] ffff8800bb3ec000 ffffffff81a9e280 ffff8800bacaf8c8 ffffffff814b3135 [12210.941818] ffff8800bb3ec000 ffffffff81a9e280 ffffffff81a9e280 ffff8800bace7800 [12210.943040] ffff8800bacaf8f0 ffffffff81397c88 ffff8800bb3ec000 ffffffff81a9e280 [12210.944288] Call Trace: [12210.944688] [<ffffffff814b3135>] fib6_new_table+0x24/0x8a [12210.945516] [<ffffffff81397c88>] vrf_dev_init+0xd4/0x162 [12210.946328] [<ffffffff814091e1>] register_netdevice+0x100/0x396 [12210.947209] [<ffffffff8139823d>] vrf_newlink+0x40/0xb3 [12210.948001] [<ffffffff814187f0>] rtnl_newlink+0x5d3/0x6d5 ... The problem above is due to the fact that the fib hash table is not allocated when IPv6 is disabled at boot. As for the VRF driver it should not do any IPv6 initializations if IPv6 is disabled, so it needs to know if IPv6 is disabled at boot. The disable parameter is private to the IPv6 module, so provide an accessor for modules to determine if IPv6 was disabled at boot time. Fixes: 35402e3136634 ("net: Add IPv6 support to VRF device") Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-12net: l3mdev: Add hook in ip and ipv6David Ahern1-1/+16
Currently the VRF driver uses the rx_handler to switch the skb device to the VRF device. Switching the dev prior to the ip / ipv6 layer means the VRF driver has to duplicate IP/IPv6 processing which adds overhead and makes features such as retaining the ingress device index more complicated than necessary. This patch moves the hook to the L3 layer just after the first NF_HOOK for PRE_ROUTING. This location makes exposing the original ingress device trivial (next patch) and allows adding other NF_HOOKs to the VRF driver in the future. dev_queue_xmit_nit is exported so that the VRF driver can cycle the skb with the switched device through the packet taps to maintain current behavior (tcpdump can be used on either the vrf device or the enslaved devices). Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-20net/ipv6/addrconf: simplify sysctl registrationKonstantin Khlebnikov1-1/+2
Struct ctl_table_header holds pointer to sysctl table which could be used for freeing it after unregistration. IPv4 sysctls already use that. Remove redundant NULL assignment: ndev allocated using kzalloc. This also saves some bytes: sysctl table could be shorter than DEVCONF_MAX+1 if some options are disable in config. Signed-off-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-26net: ipv6: Make address flushing on ifdown optionalDavid Ahern1-0/+1
Currently, all ipv6 addresses are flushed when the interface is configured down, including global, static addresses: $ ip -6 addr show dev eth1 3: eth1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 state UP qlen 1000 inet6 2100:1::2/120 scope global valid_lft forever preferred_lft forever inet6 fe80::e0:f9ff:fe79:34bd/64 scope link valid_lft forever preferred_lft forever $ ip link set dev eth1 down $ ip -6 addr show dev eth1 << nothing; all addresses have been flushed>> Add a new sysctl to make this behavior optional. The new setting defaults to flush all addresses to maintain backwards compatibility. When the set global addresses with no expire times are not flushed on an admin down. The sysctl is per-interface or system-wide for all interfaces $ sysctl -w net.ipv6.conf.eth1.keep_addr_on_down=1 or $ sysctl -w net.ipv6.conf.all.keep_addr_on_down=1 Will keep addresses on eth1 on an admin down. $ ip -6 addr show dev eth1 3: eth1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 state UP qlen 1000 inet6 2100:1::2/120 scope global valid_lft forever preferred_lft forever inet6 fe80::e0:f9ff:fe79:34bd/64 scope link valid_lft forever preferred_lft forever $ ip link set dev eth1 down $ ip -6 addr show dev eth1 3: eth1: <BROADCAST,MULTICAST> mtu 1500 state DOWN qlen 1000 inet6 2100:1::2/120 scope global tentative valid_lft forever preferred_lft forever inet6 fe80::e0:f9ff:fe79:34bd/64 scope link tentative valid_lft forever preferred_lft forever Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-11ipv6: add option to drop unsolicited neighbor advertisementsJohannes Berg1-0/+1
In certain 802.11 wireless deployments, there will be NA proxies that use knowledge of the network to correctly answer requests. To prevent unsolicitd advertisements on the shared medium from being a problem, on such deployments wireless needs to drop them. Enable this by providing an option called "drop_unsolicited_na". Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-11ipv6: add option to drop unicast encapsulated in L2 multicastJohannes Berg1-0/+1
In order to solve a problem with 802.11, the so-called hole-196 attack, add an option (sysctl) called "drop_unicast_in_l2_multicast" which, if enabled, causes the stack to drop IPv6 unicast packets encapsulated in link-layer multi- or broadcast frames. Such frames can (as an attack) be created by any member of the same wireless network and transmitted as valid encrypted frames since the symmetric key for broadcast frames is shared between all stations. Reviewed-by: Julian Anastasov <ja@ssi.bg> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-03ipv6: add complete rcu protection around np->optEric Dumazet1-1/+1
This patch addresses multiple problems : UDP/RAW sendmsg() need to get a stable struct ipv6_txoptions while socket is not locked : Other threads can change np->opt concurrently. Dmitry posted a syzkaller (http://github.com/google/syzkaller) program desmonstrating use-after-free. Starting with TCP/DCCP lockless listeners, tcp_v6_syn_recv_sock() and dccp_v6_request_recv_sock() also need to use RCU protection to dereference np->opt once (before calling ipv6_dup_options()) This patch adds full RCU protection to np->opt Reported-by: Dmitry Vyukov <dvyukov@google.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-05ipv6: inet6_sk() should use sk_fullsock()Eric Dumazet1-2/+2
SYN_RECV & TIMEWAIT sockets are not full blown, they do not have a pinet6 pointer. Fixes: ca6fb0651883 ("tcp: attach SYNACK messages to request sockets instead of listener") Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-14net: ipv6 sysctl option to ignore routes when nexthop link is downAndy Gospodarek1-0/+1
Like the ipv4 patch with a similar title, this adds a sysctl to allow the user to change routing behavior based on whether or not the interface associated with the nexthop was an up or down link. The default setting preserves the current behavior, but anyone that enables it will notice that nexthops on down interfaces will no longer be selected: net.ipv6.conf.all.ignore_routes_with_linkdown = 0 net.ipv6.conf.default.ignore_routes_with_linkdown = 0 net.ipv6.conf.lo.ignore_routes_with_linkdown = 0 ... When the above sysctls are set, not only will link status be reported to userspace, but an indication that a nexthop is dead and will not be used is also reported. 1000::/8 via 7000::2 dev p7p1 metric 1024 dead linkdown pref medium 1000::/8 via 8000::2 dev p8p1 metric 1024 pref medium 7000::/8 dev p7p1 proto kernel metric 256 dead linkdown pref medium 8000::/8 dev p8p1 proto kernel metric 256 pref medium 9000::/8 via 8000::2 dev p8p1 metric 2048 pref medium 9000::/8 via 7000::2 dev p7p1 metric 1024 dead linkdown pref medium fe80::/64 dev p7p1 proto kernel metric 256 dead linkdown pref medium fe80::/64 dev p8p1 proto kernel metric 256 pref medium This also adds devconf support and notification when sysctl values change. v2: drop use of rt6i_nhflags since it is not needed right now Signed-off-by: Andy Gospodarek <gospo@cumulusnetworks.com> Signed-off-by: Dinesh Dutt <ddutt@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-31net/ipv6: add sysctl option accept_ra_min_hop_limitHangbin Liu1-0/+1
Commit 6fd99094de2b ("ipv6: Don't reduce hop limit for an interface") disabled accept hop limit from RA if it is smaller than the current hop limit for security stuff. But this behavior kind of break the RFC definition. RFC 4861, 6.3.4. Processing Received Router Advertisements A Router Advertisement field (e.g., Cur Hop Limit, Reachable Time, and Retrans Timer) may contain a value denoting that it is unspecified. In such cases, the parameter should be ignored and the host should continue using whatever value it is already using. If the received Cur Hop Limit value is non-zero, the host SHOULD set its CurHopLimit variable to the received value. So add sysctl option accept_ra_min_hop_limit to let user choose the minimum hop limit value they can accept from RA. And set default to 1 to meet RFC standards. Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Acked-by: YOSHIFUJI Hideaki <hideaki.yoshifuji@miraclelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-22ipv6: sysctl to restrict candidate source addressesErik Kline1-0/+1
Per RFC 6724, section 4, "Candidate Source Addresses": It is RECOMMENDED that the candidate source addresses be the set of unicast addresses assigned to the interface that will be used to send to the destination (the "outgoing" interface). Add a sysctl to enable this behaviour. Signed-off-by: Erik Kline <ek@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-10ipv6: use flag instead of u16 for hop in inet6_skb_parmFlorian Westphal1-1/+1
Hop was always either 0 or sizeof(struct ipv6hdr). Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-24ipv6: introduce secret_stable to ipv6_devconfHannes Frederic Sowa1-0/+4
This patch implements the procfs logic for the stable_address knob: The secret is formatted as an ipv6 address and will be stored per interface and per namespace. We track initialized flag and return EIO errors until the secret is set. We don't inherit the secret to newly created namespaces. Cc: Erik Kline <ek@google.com> Cc: Fernando Gont <fgont@si6networks.com> Cc: Lorenzo Colitti <lorenzo@google.com> Cc: YOSHIFUJI Hideaki/吉藤英明 <hideaki.yoshifuji@miraclelinux.com> Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-03ipv6: pull cork initialization into its own function.Vlad Yasevich1-5/+7
Pull IPv6 cork initialization into its own function that can be re-used. IPv6 specific cork data did not have an explicit data structure. This patch creats eone so that just ipv6 cork data can be as arguemts. Also, since IPv6 tries to save the flow label into inet_cork_full tructure, pass the full cork. Adjust ip6_cork_release() to take cork data structures. Signed-off-by: Vladislav Yasevich <vyasevic@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-26net: ipv6: Add sysctl entry to disable MTU updates from RAHarout Hedeshian1-0/+1
The kernel forcefully applies MTU values received in router advertisements provided the new MTU is less than the current. This behavior is undesirable when the user space is managing the MTU. Instead a sysctl flag 'accept_ra_mtu' is introduced such that the user space can control whether or not RA provided MTU updates should be applied. The default behavior is unchanged; user space must explicitly set this flag to 0 for RA MTUs to be ignored. Signed-off-by: Harout Hedeshian <harouth@codeaurora.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-06ipv6: move INET6_MATCH() to include/net/inet6_hashtables.hWANG Cong1-10/+0
It is only used in net/ipv6/inet6_hashtables.c. Cc: David S. Miller <davem@davemloft.net> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-29net: ipv6: Add a sysctl to make optimistic addresses useful candidatesErik Kline1-0/+1
Add a sysctl that causes an interface's optimistic addresses to be considered equivalent to other non-deprecated addresses for source address selection purposes. Preferred addresses will still take precedence over optimistic addresses, subject to other ranking in the source address selection algorithm. This is useful where different interfaces are connected to different networks from different ISPs (e.g., a cell network and a home wifi network). The current behaviour complies with RFC 3484/6724, and it makes sense if the host has only one interface, or has multiple interfaces on the same network (same or cooperating administrative domain(s), but not in the multiple distinct networks case. For example, if a mobile device has an IPv6 address on an LTE network and then connects to IPv6-enabled wifi, while the wifi IPv6 address is undergoing DAD, IPv6 connections will try use the wifi default route with the LTE IPv6 address, and will get stuck until they time out. Also, because optimistic nodes can receive frames, issue an RTM_NEWADDR as soon as DAD starts (with the IFA_F_OPTIMSTIC flag appropriately set). A second RTM_NEWADDR is sent if DAD completes (the address flags have changed), otherwise an RTM_DELADDR is sent. Also: add an entry in ip-sysctl.txt for optimistic_dad. Signed-off-by: Erik Kline <ek@google.com> Acked-by: Lorenzo Colitti <lorenzo@google.com> Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-08ipv6: Implement automatic flow label generation on transmitTom Herbert1-1/+2
Automatically generate flow labels for IPv6 packets on transmit. The flow label is computed based on skb_get_hash. The flow label will only automatically be set when it is zero otherwise (i.e. flow label manager hasn't set one). This supports the transmit side functionality of RFC 6438. Added an IPv6 sysctl auto_flowlabels to enable/disable this behavior system wide, and added IPV6_AUTOFLOWLABEL socket option to enable this functionality per socket. By default, auto flowlabels are disabled to avoid possible conflicts with flow label manager, however if this feature proves useful we may want to enable it by default. It should also be noted that FreeBSD has already implemented automatic flow labels (including the sysctl and socket option). In FreeBSD, automatic flow labels default to enabled. Performance impact: Running super_netperf with 200 flows for TCP_RR and UDP_RR for IPv6. Note that in UDP case, __skb_get_hash will be called for every packet with explains slight regression. In the TCP case the hash is saved in the socket so there is no regression. Automatic flow labels disabled: TCP_RR: 86.53% CPU utilization 127/195/322 90/95/99% latencies 1.40498e+06 tps UDP_RR: 90.70% CPU utilization 118/168/243 90/95/99% latencies 1.50309e+06 tps Automatic flow labels enabled: TCP_RR: 85.90% CPU utilization 128/199/337 90/95/99% latencies 1.40051e+06 UDP_RR 92.61% CPU utilization 115/164/236 90/95/99% latencies 1.4687e+06 Signed-off-by: Tom Herbert <therbert@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-02inet: move ipv6only in sock_commonEric Dumazet1-5/+5
When an UDP application switches from AF_INET to AF_INET6 sockets, we have a small performance degradation for IPv4 communications because of extra cache line misses to access ipv6only information. This can also be noticed for TCP listeners, as ipv6_only_sock() is also used from __inet_lookup_listener()->compute_score() This is magnified when SO_REUSEPORT is used. Move ipv6only into struct sock_common so that it is available at no extra cost in lookups. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-01ipv6: Allow accepting RA from local IP addresses.Ben Greear1-0/+1
This can be used in virtual networking applications, and may have other uses as well. The option is disabled by default. A specific use case is setting up virtual routers, bridges, and hosts on a single OS without the use of network namespaces or virtual machines. With proper use of ip rules, routing tables, veth interface pairs and/or other virtual interfaces, and applications that can bind to interfaces and/or IP addresses, it is possibly to create one or more virtual routers with multiple hosts attached. The host interfaces can act as IPv6 systems, with radvd running on the ports in the virtual routers. With the option provided in this patch enabled, those hosts can now properly obtain IPv6 addresses from the radvd. Signed-off-by: Ben Greear <greearb@candelatech.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-06-28net: remove inet6_reqsk_allocOctavian Purdila1-10/+0
Since pktops is only used for IPv6 only and opts is used for IPv4 only, we can move these fields into a union and this allows us to drop the inet6_reqsk_alloc function as after this change it becomes equivalent with inet_reqsk_alloc. This patch also fixes a kmemcheck issue in the IPv6 stack: the flags field was not annotated after a request_sock was allocated. Signed-off-by: Octavian Purdila <octavian.purdila@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-20ipv6: make IPV6_RECVPKTINFO work for ipv4 datagramsHannes Frederic Sowa1-0/+3
We currently don't report IPV6_RECVPKTINFO in cmsg access ancillary data for IPv4 datagrams on IPv6 sockets. This patch splits the ip6_datagram_recv_ctl into two functions, one which handles both protocol families, AF_INET and AF_INET6, while the ip6_datagram_recv_specific_ctl only handles IPv6 cmsg data. ip6_datagram_recv_*_ctl never reported back any errors, so we can make them return void. Also provide a helper for protocols which don't offer dual personality to further use ip6_datagram_recv_ctl, which is exported to modules. I needed to shuffle the code for ping around a bit to make it easier to implement dual personality for ping ipv6 sockets in future. Reported-by: Gert Doering <gert@space.net> Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-20ipv6: add the IPV6_FL_F_REFLECT flag to IPV6_FL_A_GETFlorent Fourcot1-0/+1
With this option, the socket will reply with the flow label value read on received packets. The goal is to have a connection with the same flow label in both direction of the communication. Changelog of V4: * Do not erase the flow label on the listening socket. Use pktopts to store the received value Signed-off-by: Florent Fourcot <florent.fourcot@enst-bretagne.fr> Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-19ipv6: support IPV6_PMTU_INTERFACE on socketsHannes Frederic Sowa1-1/+1
IPV6_PMTU_INTERFACE is the same as IPV6_PMTU_PROBE for ipv6. Add it nontheless for symmetry with IPv4 sockets. Also drop incoming MTU information if this mode is enabled. The additional bit in ipv6_pinfo just eats in the padding behind the bitfield. There are no changes to the layout of the struct at all. Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-10ipv6: remove rcv_tclass of ipv6_pinfoFlorent Fourcot1-1/+0
tclass information in now already stored in rcv_flowinfo We do not need to store the same information twice. Signed-off-by: Florent Fourcot <florent.fourcot@enst-bretagne.fr> Reviewed-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-10ipv6: add flowinfo for tcp6 pkt_options for all casesFlorent Fourcot1-0/+1
The current implementation of IPV6_FLOWINFO only gives a result if pktoptions is available (thanks to the ip6_datagram_recv_ctl function). It gives inconsistent results to user space, sometimes there is a result for getsockopt(IPV6_FLOWINFO), sometimes not. This patch add rcv_flowinfo to store it, and return it to the userspace in the same way than other pkt_options. Signed-off-by: Florent Fourcot <florent.fourcot@enst-bretagne.fr> Reviewed-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-06xen-netback: fix fragment detection in checksum setupPaul Durrant1-0/+1
The code to detect fragments in checksum_setup() was missing for IPv4 and too eager for IPv6. (It transpires that Windows seems to send IPv6 packets with a fragment header even if they are not a fragment - i.e. offset is zero, and M bit is not set). This patch also incorporates a fix to callers of maybe_pull_tail() where skb->network_header was being erroneously added to the length argument. Signed-off-by: Paul Durrant <paul.durrant@citrix.com> Signed-off-by: Zoltan Kiss <zoltan.kiss@citrix.com> Cc: Wei Liu <wei.liu2@citrix.com> Cc: Ian Campbell <ian.campbell@citrix.com> Cc: David Vrabel <david.vrabel@citrix.com> cc: David Miller <davem@davemloft.net> Acked-by: Wei Liu <wei.liu2@citrix.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-29ipv6: Remove privacy config option.David S. Miller1-2/+0
The code for privacy extentions is very mature, and making it configurable only gives marginal memory/code savings in exchange for obfuscation and hard to read code via CPP ifdef'ery. Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-10inet: includes a sock_common in request_sockEric Dumazet1-24/+2
TCP listener refactoring, part 5 : We want to be able to insert request sockets (SYN_RECV) into main ehash table instead of the per listener hash table to allow RCU lookups and remove listener lock contention. This patch includes the needed struct sock_common in front of struct request_sock This means there is no more inet6_request_sock IPv6 specific structure. Following inet_request_sock fields were renamed as they became macros to reference fields from struct sock_common. Prefix ir_ was chosen to avoid name collisions. loc_port -> ir_loc_port loc_addr -> ir_loc_addr rmt_addr -> ir_rmt_addr rmt_port -> ir_rmt_port iif -> ir_iif Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-09ipv6: make lookups simpler and fasterEric Dumazet1-40/+6
TCP listener refactoring, part 4 : To speed up inet lookups, we moved IPv4 addresses from inet to struct sock_common Now is time to do the same for IPv6, because it permits us to have fast lookups for all kind of sockets, including upcoming SYN_RECV. Getting IPv6 addresses in TCP lookups currently requires two extra cache lines, plus a dereference (and memory stall). inet6_sk(sk) does the dereference of inet_sk(__sk)->pinet6 This patch is way bigger than its IPv4 counter part, because for IPv4, we could add aliases (inet_daddr, inet_rcv_saddr), while on IPv6, it's not doable easily. inet6_sk(sk)->daddr becomes sk->sk_v6_daddr inet6_sk(sk)->rcv_saddr becomes sk->sk_v6_rcv_saddr And timewait socket also have tw->tw_v6_daddr & tw->tw_v6_rcv_saddr at the same offset. We get rid of INET6_TW_MATCH() as INET6_MATCH() is now the generic macro. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-03inet: consolidate INET_TW_MATCHEric Dumazet1-2/+2
TCP listener refactoring, part 2 : We can use a generic lookup, sockets being in whatever state, if we are sure all relevant fields are at the same place in all socket types (ESTABLISH, TIME_WAIT, SYN_RECV) This patch removes these macros : inet_addrpair, inet_addrpair, tw_addrpair, tw_portpair And adds : sk_portpair, sk_addrpair, sk_daddr, sk_rcv_saddr Then, INET_TW_MATCH() is really the same than INET_MATCH() Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-29ipv6: drop fragmented ndisc packets by default (RFC 6980)Hannes Frederic Sowa1-0/+1
This patch implements RFC6980: Drop fragmented ndisc packets by default. If a fragmented ndisc packet is received the user is informed that it is possible to disable the check. Cc: Fernando Gont <fernando@gont.com.ar> Cc: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-27Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-0/+1
Conflicts: drivers/net/wireless/iwlwifi/pcie/trans.c include/linux/inetdevice.h The inetdevice.h conflict involves moving the IPV4_DEVCONF values into a UAPI header, overlapping additions of some new entries. The iwlwifi conflict is a context overlap. Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-20ipv6: drop packets with multiple fragmentation headersHannes Frederic Sowa1-0/+1
It is not allowed for an ipv6 packet to contain multiple fragmentation headers. So discard packets which were already reassembled by fragmentation logic and send back a parameter problem icmp. The updates for RFC 6980 will come in later, I have to do a bit more research here. Cc: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>