summaryrefslogtreecommitdiff
path: root/include/linux/irqdomain.h
AgeCommit message (Collapse)AuthorFilesLines
2017-12-29genirq/irqdomain: Rename early argument of irq_domain_activate_irq()Thomas Gleixner1-1/+1
The 'early' argument of irq_domain_activate_irq() is actually used to denote reservation mode. To avoid confusion, rename it before abuse happens. No functional change. Fixes: 72491643469a ("genirq/irqdomain: Update irq_domain_ops.activate() signature") Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Alexandru Chirvasitu <achirvasub@gmail.com> Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Dou Liyang <douly.fnst@cn.fujitsu.com> Cc: Pavel Machek <pavel@ucw.cz> Cc: Maciej W. Rozycki <macro@linux-mips.org> Cc: Mikael Pettersson <mikpelinux@gmail.com> Cc: Josh Poulson <jopoulso@microsoft.com> Cc: Mihai Costache <v-micos@microsoft.com> Cc: Stephen Hemminger <sthemmin@microsoft.com> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: linux-pci@vger.kernel.org Cc: Haiyang Zhang <haiyangz@microsoft.com> Cc: Dexuan Cui <decui@microsoft.com> Cc: Simon Xiao <sixiao@microsoft.com> Cc: Saeed Mahameed <saeedm@mellanox.com> Cc: Jork Loeser <Jork.Loeser@microsoft.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: devel@linuxdriverproject.org Cc: KY Srinivasan <kys@microsoft.com> Cc: Alan Cox <alan@linux.intel.com> Cc: Sakari Ailus <sakari.ailus@intel.com>, Cc: linux-media@vger.kernel.org
2017-11-14Merge branch 'irq-core-for-linus' of ↵Linus Torvalds1-9/+11
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull irq core updates from Thomas Gleixner: "A rather large update for the interrupt core code and the irq chip drivers: - Add a new bitmap matrix allocator and supporting changes, which is used to replace the x86 vector allocator which comes with separate pull request. This allows to replace the convoluted nested loop allocation function in x86 with a facility which supports the recently added property of managed interrupts proper and allows to switch to a best effort vector reservation scheme, which addresses problems with vector exhaustion. - A large update to the ARM GIC-V3-ITS driver adding support for range selectors. - New interrupt controllers: - Meson and Meson8 GPIO - BCM7271 L2 - Socionext EXIU If you expected that this will stop at some point, I have to disappoint you. There are new ones posted already. Sigh! - STM32 interrupt controller support for new platforms. - A pile of fixes, cleanups and updates to the MIPS GIC driver - The usual small fixes, cleanups and updates all over the place. Most visible one is to move the irq chip drivers Kconfig switches into a separate Kconfig menu" * 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (70 commits) genirq: Fix type of shifting literal 1 in __setup_irq() irqdomain: Drop pointless NULL check in virq_debug_show_one genirq/proc: Return proper error code when irq_set_affinity() fails irq/work: Use llist_for_each_entry_safe irqchip: mips-gic: Print warning if inherited GIC base is used irqchip/mips-gic: Add pr_fmt and reword pr_* messages irqchip/stm32: Move the wakeup on interrupt mask irqchip/stm32: Fix initial values irqchip/stm32: Add stm32h7 support dt-bindings/interrupt-controllers: Add compatible string for stm32h7 irqchip/stm32: Add multi-bank management irqchip/stm32: Select GENERIC_IRQ_CHIP irqchip/exiu: Add support for Socionext Synquacer EXIU controller dt-bindings: Add description of Socionext EXIU interrupt controller irqchip/gic-v3-its: Fix VPE activate callback return value irqchip: mips-gic: Make IPI bitmaps static irqchip: mips-gic: Share register writes in gic_set_type() irqchip: mips-gic: Remove gic_vpes variable irqchip: mips-gic: Use num_possible_cpus() to reserve IPIs irqchip: mips-gic: Configure EIC when CPUs come online ...
2017-11-02irqdomain: Update the comments of fwnode field of irq_domain structureDou Liyang1-2/+2
Commit: f110711a6053 ("irqdomain: Convert irqdomain-%3Eof_node to fwnode") converted of_node field to fwnode, but didn't update its comments. Update it. Fixes: f110711a6053 ("irqdomain: Convert irqdomain-%3Eof_node to fwnode") Signed-off-by: Dou Liyang <douly.fnst@cn.fujitsu.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2017-11-02License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseGreg Kroah-Hartman1-0/+1
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-10-19irqdomain: Move revmap_trees_mutex to struct irq_domainMasahiro Yamada1-0/+2
The revmap_trees_mutex protects domain->revmap_tree. There is no need to make it global because it is allowed to modify revmap_tree of two different domains concurrently. Having said that, this would not be a actual bottleneck because the interrupt map/unmap does not occur quite often. Rather, the motivation is to tidy up the code from a data structure point of view. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2017-09-25genirq/irqdomain: Propagate early activationThomas Gleixner1-1/+1
Propagate the early activation mode to the irqdomain activate() callbacks. This is required for the upcoming reservation, late vector assignment scheme, so that the early activation call can act accordingly. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Juergen Gross <jgross@suse.com> Tested-by: Yu Chen <yu.c.chen@intel.com> Acked-by: Juergen Gross <jgross@suse.com> Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: Tony Luck <tony.luck@intel.com> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Alok Kataria <akataria@vmware.com> Cc: Joerg Roedel <joro@8bytes.org> Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Christoph Hellwig <hch@lst.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Rui Zhang <rui.zhang@intel.com> Cc: "K. Y. Srinivasan" <kys@microsoft.com> Cc: Arjan van de Ven <arjan@linux.intel.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Len Brown <lenb@kernel.org> Link: https://lkml.kernel.org/r/20170913213153.028353660@linutronix.de
2017-09-25genirq/irqdomain: Allow irq_domain_activate_irq() to failThomas Gleixner1-1/+1
Allow irq_domain_activate_irq() to fail. This is required to support a reservation and late vector assignment scheme. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Juergen Gross <jgross@suse.com> Tested-by: Yu Chen <yu.c.chen@intel.com> Acked-by: Juergen Gross <jgross@suse.com> Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: Tony Luck <tony.luck@intel.com> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Alok Kataria <akataria@vmware.com> Cc: Joerg Roedel <joro@8bytes.org> Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Christoph Hellwig <hch@lst.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Rui Zhang <rui.zhang@intel.com> Cc: "K. Y. Srinivasan" <kys@microsoft.com> Cc: Arjan van de Ven <arjan@linux.intel.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Len Brown <lenb@kernel.org> Link: https://lkml.kernel.org/r/20170913213152.933882227@linutronix.de
2017-09-25genirq/irqdomain: Update irq_domain_ops.activate() signatureThomas Gleixner1-1/+1
The irq_domain_ops.activate() callback has no return value and no way to tell the function that the activation is early. The upcoming changes to support a reservation scheme which allows to assign interrupt vectors on x86 only when the interrupt is actually requested requires: - A return value, so activation can fail at request_irq() time - Information that the activate invocation is early, i.e. before request_irq(). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Juergen Gross <jgross@suse.com> Tested-by: Yu Chen <yu.c.chen@intel.com> Acked-by: Juergen Gross <jgross@suse.com> Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: Tony Luck <tony.luck@intel.com> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Alok Kataria <akataria@vmware.com> Cc: Joerg Roedel <joro@8bytes.org> Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Christoph Hellwig <hch@lst.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Rui Zhang <rui.zhang@intel.com> Cc: "K. Y. Srinivasan" <kys@microsoft.com> Cc: Arjan van de Ven <arjan@linux.intel.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Len Brown <lenb@kernel.org> Link: https://lkml.kernel.org/r/20170913213152.848490816@linutronix.de
2017-09-25genirq: Make state consistent for !IRQ_DOMAIN_HIERARCHYThomas Gleixner1-4/+0
In the !IRQ_DOMAIN_HIERARCHY cas the activation stubs are not setting/clearing the activation status bits. This is not a problem at the moment, but upcoming changes require a correct status. Add the set/clear incovations to the stub functions and move them to the core internal header to avoid duplication and visibility outside the core. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Juergen Gross <jgross@suse.com> Tested-by: Yu Chen <yu.c.chen@intel.com> Acked-by: Juergen Gross <jgross@suse.com> Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: Tony Luck <tony.luck@intel.com> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Alok Kataria <akataria@vmware.com> Cc: Joerg Roedel <joro@8bytes.org> Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Christoph Hellwig <hch@lst.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Rui Zhang <rui.zhang@intel.com> Cc: "K. Y. Srinivasan" <kys@microsoft.com> Cc: Arjan van de Ven <arjan@linux.intel.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Len Brown <lenb@kernel.org> Link: https://lkml.kernel.org/r/20170913213152.591985591@linutronix.de
2017-09-25irqdomain/debugfs: Provide domain specific debug callbackThomas Gleixner1-1/+5
Some interrupt domains like the X86 vector domain has special requirements for debugging, like showing the vector usage on the CPUs. Add a callback to the irqdomain ops which can be filled in by domains which require it and add conditional invocations to the irqdomain and the per irq debug files. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Juergen Gross <jgross@suse.com> Tested-by: Yu Chen <yu.c.chen@intel.com> Acked-by: Juergen Gross <jgross@suse.com> Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: Tony Luck <tony.luck@intel.com> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Alok Kataria <akataria@vmware.com> Cc: Joerg Roedel <joro@8bytes.org> Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Christoph Hellwig <hch@lst.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Rui Zhang <rui.zhang@intel.com> Cc: "K. Y. Srinivasan" <kys@microsoft.com> Cc: Arjan van de Ven <arjan@linux.intel.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Len Brown <lenb@kernel.org> Link: https://lkml.kernel.org/r/20170913213152.512937505@linutronix.de
2017-09-05Merge tag 'devprop-4.14-rc1' of ↵Linus Torvalds1-1/+3
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull device properties framework updates from Rafael Wysocki: "These introduce fwnode operations for all of the separate types of 'firmware nodes' that can be handled by the device properties framework, make the framework use const fwnode arguments all over, add a helper for the consolidated handling of node references and switch over the framework to the new UUID API. Specifics: - Introduce fwnode operations for all of the separate types of 'firmware nodes' that can be handled by the device properties framework and drop the type field from struct fwnode_handle (Sakari Ailus, Arnd Bergmann). - Make the device properties framework use const fwnode arguments where possible (Sakari Ailus). - Add a helper for the consolidated handling of node references to the device properties framework (Sakari Ailus). - Switch over the ACPI part of the device properties framework to the new UUID API (Andy Shevchenko)" * tag 'devprop-4.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: ACPI: device property: Switch to use new generic UUID API device property: export irqchip_fwnode_ops device property: Introduce fwnode_property_get_reference_args device property: Constify fwnode property API device property: Constify argument to pset fwnode backend ACPI: Constify internal fwnode arguments ACPI: Constify acpi_bus helper functions, switch to macros ACPI: Prepare for constifying acpi_get_next_subnode() fwnode argument device property: Get rid of struct fwnode_handle type field ACPI: Use IS_ERR_OR_NULL() instead of non-NULL check in is_acpi_data_node()
2017-08-18irqdomain: Add irq_domain_{push,pop}_irq() functionsDavid Daney1-0/+3
For an already existing irqdomain hierarchy, as might be obtained via a call to pci_enable_msix_range(), a PCI driver wishing to add an additional irqdomain to the hierarchy needs to be able to insert the irqdomain to that already initialized hierarchy. Calling irq_domain_create_hierarchy() allows the new irqdomain to be created, but no existing code allows for initializing the associated irq_data. Add a couple of helper functions (irq_domain_push_irq() and irq_domain_pop_irq()) to initialize the irq_data for the new irqdomain added to an existing hierarchy. Signed-off-by: David Daney <david.daney@cavium.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Marc Zyngier <marc.zyngier@arm.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Alexandre Courbot <gnurou@gmail.com> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: linux-gpio@vger.kernel.org Link: http://lkml.kernel.org/r/1503017616-3252-6-git-send-email-david.daney@cavium.com
2017-07-22device property: Get rid of struct fwnode_handle type fieldSakari Ailus1-1/+3
Instead of relying on the struct fwnode_handle type field, define fwnode_operations structs for all separate types of fwnodes. To find out the type, compare to the ops field to relevant ops structs. This change has two benefits: 1. it avoids adding the type field to each and every instance of struct fwnode_handle, thus saving memory and 2. makes the ops field the single factor that defines both the types of the fwnode as well as defines the implementation of its operations, decreasing the possibility of bugs when developing code dealing with fwnode internals. Suggested-by: Rob Herring <robh@kernel.org> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-06-22genirq/irqdomain: Remove auto-recursive hierarchy supportMarc Zyngier1-6/+3
It did seem like a good idea at the time, but it never really caught on, and auto-recursive domains remain unused 3 years after having been introduced. Oh well, time for a late spring cleanup. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2017-06-22genirq/irqdomain: Add irq_domain_update_bus_token helperMarc Zyngier1-0/+3
We can have irq domains that are identified by the same fwnode (because they are serviced by the same HW), and yet have different functionnality (because they serve different busses, for example). This is what we use the bus_token field. Since we don't use this field when generating the domain name, all the aliasing domains will get the same name, and the debugfs file creation fails. Also, bus_token is updated by individual drivers, and the core code is unaware of that update. In order to sort this mess, let's introduce a helper that takes care of updating bus_token, and regenerate the debugfs file. A separate patch will update all the individual users. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2017-06-22genirq/debugfs: Add proper debugfs interfaceThomas Gleixner1-0/+4
Debugging (hierarchical) interupt domains is tedious as there is no information about the hierarchy and no information about states of interrupts in the various domain levels. Add a debugfs directory 'irq' and subdirectories 'domains' and 'irqs'. The domains directory contains the domain files. The content is information about the domain. If the domain is part of a hierarchy then the parent domains are printed as well. # ls /sys/kernel/debug/irq/domains/ default INTEL-IR-2 INTEL-IR-MSI-2 IO-APIC-IR-2 PCI-MSI DMAR-MSI INTEL-IR-3 INTEL-IR-MSI-3 IO-APIC-IR-3 unknown-1 INTEL-IR-0 INTEL-IR-MSI-0 IO-APIC-IR-0 IO-APIC-IR-4 VECTOR INTEL-IR-1 INTEL-IR-MSI-1 IO-APIC-IR-1 PCI-HT # cat /sys/kernel/debug/irq/domains/VECTOR name: VECTOR size: 0 mapped: 216 flags: 0x00000041 # cat /sys/kernel/debug/irq/domains/IO-APIC-IR-0 name: IO-APIC-IR-0 size: 24 mapped: 19 flags: 0x00000041 parent: INTEL-IR-3 name: INTEL-IR-3 size: 65536 mapped: 167 flags: 0x00000041 parent: VECTOR name: VECTOR size: 0 mapped: 216 flags: 0x00000041 Unfortunately there is no per cpu information about the VECTOR domain (yet). The irqs directory contains detailed information about mapped interrupts. # cat /sys/kernel/debug/irq/irqs/3 handler: handle_edge_irq status: 0x00004000 istate: 0x00000000 ddepth: 1 wdepth: 0 dstate: 0x01018000 IRQD_IRQ_DISABLED IRQD_SINGLE_TARGET IRQD_MOVE_PCNTXT node: 0 affinity: 0-143 effectiv: 0 pending: domain: IO-APIC-IR-0 hwirq: 0x3 chip: IR-IO-APIC flags: 0x10 IRQCHIP_SKIP_SET_WAKE parent: domain: INTEL-IR-3 hwirq: 0x20000 chip: INTEL-IR flags: 0x0 parent: domain: VECTOR hwirq: 0x3 chip: APIC flags: 0x0 This was developed to simplify the debugging of the managed affinity changes. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Marc Zyngier <marc.zyngier@arm.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Keith Busch <keith.busch@intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Christoph Hellwig <hch@lst.de> Link: http://lkml.kernel.org/r/20170619235444.537566163@linutronix.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2017-06-22genirq/irqdomain: Add map counterThomas Gleixner1-0/+2
Add a map counter instead of counting radix tree entries for diagnosis. That also gives correct information for linear domains. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Marc Zyngier <marc.zyngier@arm.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Keith Busch <keith.busch@intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Christoph Hellwig <hch@lst.de> Link: http://lkml.kernel.org/r/20170619235444.459397746@linutronix.de
2017-06-22genirq: Allow fwnode to carry name information onlyThomas Gleixner1-1/+30
In order to provide proper debug interface it's required to have domain names available when the domain is added. Non fwnode based architectures like x86 have no way to do so. It's not possible to use domain ops or host data for this as domain ops might be the same for several instances, but the names have to be unique. Extend the irqchip fwnode to allow transporting the domain name. If no node is supplied, create a 'unknown-N' placeholder. Warn if an invalid node is supplied and treat it like no node. This happens e.g. with i2 devices on x86 which hand in an ACPI type node which has no interface for retrieving the name. [ Folded a fix from Marc to make DT name parsing work ] Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Marc Zyngier <marc.zyngier@arm.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Keith Busch <keith.busch@intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Christoph Hellwig <hch@lst.de> Link: http://lkml.kernel.org/r/20170619235443.588784933@linutronix.de
2017-03-06irqdomain: Add empty irq_domain_check_msi_remapMian Yousaf Kaukab1-0/+4
Fix following build error for s390: drivers/vfio/vfio_iommu_type1.c: In function 'vfio_iommu_type1_attach_group': drivers/vfio/vfio_iommu_type1.c:1290:25: error: implicit declaration of function 'irq_domain_check_msi_remap' Acked-by: Marc Zyngier <marc.zyngier@arm.com> Reviewed-by: Eric Auger <eric.auger@redhat.com> Signed-off-by: Mian Yousaf Kaukab <yousaf.kaukab@suse.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2017-01-23irqdomain: irq_domain_check_msi_remapEric Auger1-0/+1
This new function checks whether all MSI irq domains implement IRQ remapping. This is useful to understand whether VFIO passthrough is safe with respect to interrupts. On ARM typically an MSI controller can sit downstream to the IOMMU without preventing VFIO passthrough. As such any assigned device can write into the MSI doorbell. In case the MSI controller implements IRQ remapping, assigned devices will not be able to trigger interrupts towards the host. On the contrary, the assignment must be emphasized as unsafe with respect to interrupts. Signed-off-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Marc Zyngier <marc.zyngier@arm.com> Reviewed-by: Tomasz Nowicki <tomasz.nowicki@caviumnetworks.com> Tested-by: Tomasz Nowicki <tomasz.nowicki@caviumnetworks.com> Tested-by: Bharat Bhushan <bharat.bhushan@nxp.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2017-01-23irqdomain: Add irq domain MSI and MSI_REMAP flagsEric Auger1-0/+35
We introduce two new enum values for the irq domain flag: - IRQ_DOMAIN_FLAG_MSI indicates the irq domain corresponds to an MSI domain - IRQ_DOMAIN_FLAG_MSI_REMAP indicates the irq domain has MSI remapping capabilities. Those values will be useful to check all MSI irq domains have MSI remapping support when assessing the safety of IRQ assignment to a guest. irq_domain_hierarchical_is_msi_remap() allows to check if an irq domain or any parent implements MSI remapping. Signed-off-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Marc Zyngier <marc.zyngier@arm.com> Reviewed-by: Tomasz Nowicki <tomasz.nowicki@caviumnetworks.com> Tested-by: Tomasz Nowicki <tomasz.nowicki@caviumnetworks.com> Tested-by: Bharat Bhushan <bharat.bhushan@nxp.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2016-07-04Merge branch 'irq/for-block' into irq/coreThomas Gleixner1-3/+6
Pull the irq affinity managing code which is in a seperate branch for block developers to pull.
2016-07-04genirq: Add affinity hint to irq allocationThomas Gleixner1-3/+6
Add an extra argument to the irq(domain) allocation functions, so we can hand down affinity hints to the allocator. Thats necessary to implement proper support for multiqueue devices. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Christoph Hellwig <hch@lst.de> Cc: linux-block@vger.kernel.org Cc: linux-pci@vger.kernel.org Cc: linux-nvme@lists.infradead.org Cc: axboe@fb.com Cc: agordeev@redhat.com Link: http://lkml.kernel.org/r/1467621574-8277-4-git-send-email-hch@lst.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-06-13irqdomain: Don't set type when mapping an IRQJon Hunter1-0/+3
Some IRQ chips, such as GPIO controllers or secondary level interrupt controllers, may require require additional runtime power management control to ensure they are accessible. For such IRQ chips, it makes sense to enable the IRQ chip when interrupts are requested and disabled them again once all interrupts have been freed. When mapping an IRQ, the IRQ type settings are read and then programmed. The mapping of the IRQ happens before the IRQ is requested and so the programming of the type settings occurs before the IRQ is requested. This is a problem for IRQ chips that require additional power management control because they may not be accessible yet. Therefore, when mapping the IRQ, don't program the type settings, just save them and then program these saved settings when the IRQ is requested (so long as if they are not overridden via the call to request the IRQ). Add a stub function for irq_domain_free_irqs() to avoid any compilation errors when CONFIG_IRQ_DOMAIN_HIERARCHY is not selected. Signed-off-by: Jon Hunter <jonathanh@nvidia.com> Reviewed-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2016-05-02irqdomain: Allow domain matching on irq_fwspecMarc Zyngier1-1/+14
When iterating over the irq domain list, we try to match a domain either by calling a match() function or by comparing a number of fields passed as parameters. Both approaches are a bit restrictive: - match() is DT specific and only takes a device node - the fallback case only deals with the fwnode_handle It would be useful if we had a per-domain function that would actually perform the matching check on the whole of the irq_fwspec structure. This would allow for a domain to triage matching attempts that need to extend beyond the fwnode. Let's introduce irq_find_matching_fwspec(), which takes a full blown irq_fwspec structure, and call into a select() function implemented by the irqdomain. irq_find_matching_fwnode() is made a wrapper around irq_find_matching_fwspec in order to preserve compatibility. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: devicetree@vger.kernel.org Cc: Jason Cooper <jason@lakedaemon.net> Cc: Will Deacon <will.deacon@arm.com> Cc: Rob Herring <robh+dt@kernel.org> Link: http://lkml.kernel.org/r/1460365075-7316-2-git-send-email-marc.zyngier@arm.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-05-02genirq: Add error code reporting to irq_{reserve,destroy}_ipiMatt Redfearn1-3/+2
Make these functions return appropriate error codes when something goes wrong. Previously irq_destroy_ipi returned void making it impossible to notify the caller if the request could not be fulfilled. Patch 1 in the series added another condition in which this could fail in addition to the existing ones. irq_reserve_ipi returned an unsigned int meaning it could only return 0 on failure and give the caller no indication as to why the request failed. As time goes on there are likely to be further conditions added in which these functions can fail. These APIs and the IPI IRQ domain are new in 4.6 and the number of existing call sites are low, changing the API now has little impact on the code, while making it easier for these functions to grow over time. Signed-off-by: Matt Redfearn <matt.redfearn@imgtec.com> Cc: linux-mips@linux-mips.org Cc: jason@lakedaemon.net Cc: marc.zyngier@arm.com Cc: ralf@linux-mips.org Cc: Qais Yousef <qsyousef@gmail.com> Cc: lisa.parratt@imgtec.com Cc: jiang.liu@linux.intel.com Link: http://lkml.kernel.org/r/1461568464-31701-2-git-send-email-matt.redfearn@imgtec.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-05-02genirq: Make irq_destroy_ipi take a cpumask of IPIs to destroyMatt Redfearn1-1/+1
Previously irq_destroy_ipi() would destroy IPIs to all CPUs that were configured by irq_reserve_ipi(). This change makes it possible to destroy just a subset of the IPIs. This may be useful to remove IPIs to CPUs that have been hot removed so that the IRQ numbers allocated within the IPI domain can be re-used. The original behaviour is restored by passing the complete mask that the IPI was created with. There are currently no users of this function that would break from the API change. Signed-off-by: Matt Redfearn <matt.redfearn@imgtec.com> Cc: linux-mips@linux-mips.org Cc: jason@lakedaemon.net Cc: marc.zyngier@arm.com Cc: ralf@linux-mips.org Cc: Qais Yousef <qsyousef@gmail.com> Cc: lisa.parratt@imgtec.com Cc: jiang.liu@linux.intel.com Link: http://lkml.kernel.org/r/1461568464-31701-1-git-send-email-matt.redfearn@imgtec.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-03-18Merge tag 'staging-4.6-rc1' of ↵Linus Torvalds1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging Pull staging driver updates from Greg KH: "Here is the big staging driver pull request for 4.6-rc1. Lots of little things here, over 1600 patches or so. Notable is all of the good Lustre work happening, those developers have finally woken up and are cleaning up their code greatly. The Outreachy intern application process is also happening, which brought in another 400 or so patches. Full details are in the very long shortlog. All of these have been in linux-next with no reported issues" * tag 'staging-4.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (1673 commits) staging: lustre: fix aligments in lnet selftest staging: lustre: report minimum of two buffers for LNet selftest load test staging: lustre: test for proper errno code in lstcon_rpc_trans_abort staging: lustre: filter remaining extra spacing for lnet selftest staging: lustre: remove extra spacing when setting variable for lnet selftest staging: lustre: remove extra spacing of variable declartions for lnet selftest staging: lustre: fix spacing issues checkpatch reported in lnet selftest staging: lustre: remove returns in void function for lnet selftest staging: lustre: fix bogus lst errors for lnet selftest staging: netlogic: Replacing pr_err with dev_err after the call to devm_kzalloc staging: mt29f_spinand: Replacing pr_info with dev_info after the call to devm_kzalloc staging: android: ion: fix up file mode staging: ion: debugfs invalid gfp mask staging: rts5208: Replace pci_enable_device with pcim_enable_device Staging: ieee80211: Place constant on right side of the test. staging: speakup: Replace del_timer with del_timer_sync staging: lowmemorykiller: fix 2 checks that checkpatch complained staging: mt29f_spinand: Drop void pointer cast staging: rdma: hfi1: file_ops: Replace ALIGN with PAGE_ALIGN staging: rdma: hfi1: driver: Replace IS_ALIGNED with PAGE_ALIGNED ...
2016-02-25genirq: Add a new generic IPI reservation code to irq coreQais Yousef1-0/+5
Add a generic mechanism to dynamically allocate an IPI. Depending on the underlying implementation this creates either a single Linux irq or a consective range of Linux irqs. The Linux irq is used later to send IPIs to other CPUs. [ tglx: Massaged the code and removed the 'consecutive mask' restriction for the single IRQ case ] Signed-off-by: Qais Yousef <qais.yousef@imgtec.com> Cc: <jason@lakedaemon.net> Cc: <marc.zyngier@arm.com> Cc: <jiang.liu@linux.intel.com> Cc: <ralf@linux-mips.org> Cc: <linux-mips@linux-mips.org> Cc: <lisa.parratt@imgtec.com> Cc: Qais Yousef <qsyousef@gmail.com> Link: http://lkml.kernel.org/r/1449580830-23652-9-git-send-email-qais.yousef@imgtec.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-02-25genirq: Make irq_domain_alloc_descs() non staticQais Yousef1-0/+2
We will need to use this function to implement irq_reserve_ipi() later. So make it non static and move the prototype to irqdomain.h to allow using it outside irqdomain.c Signed-off-by: Qais Yousef <qais.yousef@imgtec.com> Cc: <jason@lakedaemon.net> Cc: <marc.zyngier@arm.com> Cc: <jiang.liu@linux.intel.com> Cc: <ralf@linux-mips.org> Cc: <linux-mips@linux-mips.org> Cc: <lisa.parratt@imgtec.com> Cc: Qais Yousef <qsyousef@gmail.com> Link: http://lkml.kernel.org/r/1449580830-23652-8-git-send-email-qais.yousef@imgtec.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-02-25genirq: Add DOMAIN_BUS_IPIQais Yousef1-0/+1
We need a way to search and match IPI domains. Using the new enum we can use irq_find_matching_host() to do that. Signed-off-by: Qais Yousef <qais.yousef@imgtec.com> Cc: <jason@lakedaemon.net> Cc: <marc.zyngier@arm.com> Cc: <jiang.liu@linux.intel.com> Cc: <ralf@linux-mips.org> Cc: <linux-mips@linux-mips.org> Cc: <lisa.parratt@imgtec.com> Cc: Qais Yousef <qsyousef@gmail.com> Link: http://lkml.kernel.org/r/1449580830-23652-3-git-send-email-qais.yousef@imgtec.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-02-25genirq: Add new IPI irqdomain flagsQais Yousef1-0/+37
These flags will be used to identify an IPI domain. We have two flavours of IPI implementations: IRQ_DOMAIN_FLAG_IPI_PER_CPU: Each CPU has its own virq and hwirq IRQ_DOMAIN_FLAG_IPI_SINGLE : A single virq and hwirq for all CPUs Signed-off-by: Qais Yousef <qais.yousef@imgtec.com> Cc: <jason@lakedaemon.net> Cc: <marc.zyngier@arm.com> Cc: <jiang.liu@linux.intel.com> Cc: <ralf@linux-mips.org> Cc: <linux-mips@linux-mips.org> Cc: <lisa.parratt@imgtec.com> Cc: Qais Yousef <qsyousef@gmail.com> Link: http://lkml.kernel.org/r/1449580830-23652-2-git-send-email-qais.yousef@imgtec.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-02-08irqdomain: Added domain bus token DOMAIN_BUS_FSL_MC_MSIJ. German Rivera1-0/+1
Since an FSL-MC bus is a new bus type that is neither PCI nor PLATFORM, we need a new domain bus token to disambiguate the IRQ domain for FSL-MC MSIs. Signed-off-by: J. German Rivera <German.Rivera@freescale.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-01-26irqdomain: Allow domain lookup with DOMAIN_BUS_WIRED tokenMarc Zyngier1-0/+1
Let's take the (outlandish) example of an interrupt controller capable of handling both wired interrupts and PCI MSIs. With the current code, the PCI MSI domain is going to be tagged with DOMAIN_BUS_PCI_MSI, and the wired domain with DOMAIN_BUS_ANY. Things get hairy when we start looking up the domain for a wired interrupt (typically when creating it based on some firmware information - DT or ACPI). In irq_create_fwspec_mapping(), we perform the lookup using DOMAIN_BUS_ANY, which is actually used as a wildcard. This gives us one chance out of two to end up with the wrong domain, and we try to configure a wired interrupt with the MSI domain. Everything grinds to a halt pretty quickly. What we really need to do is to start looking for a domain that would uniquely identify a wired interrupt domain, and only use DOMAIN_BUS_ANY as a fallback. In order to solve this, let's introduce a new DOMAIN_BUS_WIRED token, which is going to be used exactly as described above. Of course, this depends on the irqchip to setup the domain bus_token, and nobody had to implement this so far. Only so far. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Rob Herring <robh+dt@kernel.org> Cc: Frank Rowand <frowand.list@gmail.com> Cc: Grant Likely <grant.likely@linaro.org> Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Cc: Jiang Liu <jiang.liu@linux.intel.com> Link: http://lkml.kernel.org/r/1453816347-32720-2-git-send-email-marc.zyngier@arm.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-12-29Merge branch 'irq/gic-v2m-acpi' of ↵Thomas Gleixner1-0/+10
git://git.kernel.org/pub/scm/linux/kernel/git/maz/arm-platforms into irq/core Pull another round of GIC changes from Marc: ACPI support for GIV-v2m
2015-12-21irqdomain: Introduce is_fwnode_irqchip helperSuravee Suthikulpanit1-0/+5
Since there will be several places checking if fwnode.type is equal FWNODE_IRQCHIP, this patch adds a convenient function for this purpose. Acked-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Suravee Suthikulpanit <Suravee.Suthikulpanit@amd.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2015-12-21acpi: pci: Setup MSI domain for ACPI based pci devicesSuravee Suthikulpanit1-0/+5
This patch introduces pci_msi_register_fwnode_provider() for irqchip to register a callback, to provide a way to determine appropriate MSI domain for a pci device. It also introduces pci_host_bridge_acpi_msi_domain(), which returns the MSI domain of the specified PCI host bridge with DOMAIN_BUS_PCI_MSI bus token. Then, it is assigned to pci device. Reviewed-by: Marc Zyngier <marc.zyngier@arm.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Rafael J. Wysocki <rjw@rjwysocki.net> Signed-off-by: Suravee Suthikulpanit <Suravee.Suthikulpanit@amd.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2015-12-16irqdomain: Make irq_domain_alloc_irqs_recursive availableMarc Zyngier1-0/+3
We are soon going to need the MSI layer to call into the domain allocators. Instead of open coding this, make the standard irq_domain_alloc_irqs_recursive function available to the MSI layer. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2015-10-13irqdomain: Documentation updatesMarc Zyngier1-13/+10
Update the IRQ domain documentation to reflect the changes made while divorcing the domain infrastructure from Device Tree. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Tested-by: Hanjun Guo <hanjun.guo@linaro.org> Tested-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: <linux-arm-kernel@lists.infradead.org> Cc: Tomasz Nowicki <tomasz.nowicki@linaro.org> Cc: Suravee Suthikulpanit <Suravee.Suthikulpanit@amd.com> Cc: Graeme Gregory <graeme@xora.org.uk> Cc: Jake Oshins <jakeo@microsoft.com> Cc: Jiang Liu <jiang.liu@linux.intel.com> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Rafael J. Wysocki <rjw@rjwysocki.net> Link: http://lkml.kernel.org/r/1444737105-31573-18-git-send-email-marc.zyngier@arm.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-10-13irqdomain: Introduce irq_domain_create_hierarchyMarc Zyngier1-2/+15
As we're about to start converting the various MSI layers to use fwnode_handle instead of device_node, add irq_domain_create_hierarchy as a directly equivalent of irq_domain_add_hierarchy (which still exists as a compatibility interface). Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Tested-by: Hanjun Guo <hanjun.guo@linaro.org> Tested-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: <linux-arm-kernel@lists.infradead.org> Cc: Tomasz Nowicki <tomasz.nowicki@linaro.org> Cc: Suravee Suthikulpanit <Suravee.Suthikulpanit@amd.com> Cc: Graeme Gregory <graeme@xora.org.uk> Cc: Jake Oshins <jakeo@microsoft.com> Cc: Jiang Liu <jiang.liu@linux.intel.com> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Rafael J. Wysocki <rjw@rjwysocki.net> Link: http://lkml.kernel.org/r/1444737105-31573-16-git-send-email-marc.zyngier@arm.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-10-13irqdomain: Add a fwnode_handle allocatorMarc Zyngier1-0/+2
In order to be able to reference an irqdomain from ACPI, we need to be able to create an identifier, which is usually a struct device_node. This device node does't really fit the ACPI infrastructure, so we cunningly allocate a new structure containing a fwnode_handle, and return that. This structure doesn't really point to a device (interrupt controllers are not "real" devices in Linux), but as we cannot really deny that they exist, we create them with a new fwnode_type (FWNODE_IRQCHIP). Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-and-tested-by: Hanjun Guo <hanjun.guo@linaro.org> Tested-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: <linux-arm-kernel@lists.infradead.org> Cc: Tomasz Nowicki <tomasz.nowicki@linaro.org> Cc: Suravee Suthikulpanit <Suravee.Suthikulpanit@amd.com> Cc: Graeme Gregory <graeme@xora.org.uk> Cc: Jake Oshins <jakeo@microsoft.com> Cc: Jiang Liu <jiang.liu@linux.intel.com> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Rafael J. Wysocki <rjw@rjwysocki.net> Link: http://lkml.kernel.org/r/1444737105-31573-9-git-send-email-marc.zyngier@arm.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-10-13irqdomain: Introduce irq_domain_create_{linear, tree}Marc Zyngier1-6/+25
Just like we have irq_domain_add_{linear,tree} to create a irq domain identified by an of_node, introduce irq_domain_create_{linear,tree} that do the same thing, except that they take a struct fwnode_handle. Existing functions get rewritten in terms of the new ones so that everything keeps working as before (and __irq_domain_add is now fwnode_handle based as well). Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Reviewed-and-tested-by: Hanjun Guo <hanjun.guo@linaro.org> Tested-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: <linux-arm-kernel@lists.infradead.org> Cc: Tomasz Nowicki <tomasz.nowicki@linaro.org> Cc: Suravee Suthikulpanit <Suravee.Suthikulpanit@amd.com> Cc: Graeme Gregory <graeme@xora.org.uk> Cc: Jake Oshins <jakeo@microsoft.com> Cc: Jiang Liu <jiang.liu@linux.intel.com> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Rafael J. Wysocki <rjw@rjwysocki.net> Link: http://lkml.kernel.org/r/1444737105-31573-8-git-send-email-marc.zyngier@arm.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-10-13irqdomain: Introduce irq_create_fwspec_mappingMarc Zyngier1-0/+1
Just like we have irq_create_of_mapping, irq_create_fwspec_mapping creates a IRQ domain mapping for an interrupt described in a struct irq_fwspec. irq_create_of_mapping gets rewritten in terms of the new function, and the hack we introduced before gets removed (now that no stacked irqchip uses of_phandle_args anymore). Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Reviewed-and-tested-by: Hanjun Guo <hanjun.guo@linaro.org> Tested-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: <linux-arm-kernel@lists.infradead.org> Cc: Tomasz Nowicki <tomasz.nowicki@linaro.org> Cc: Suravee Suthikulpanit <Suravee.Suthikulpanit@amd.com> Cc: Graeme Gregory <graeme@xora.org.uk> Cc: Jake Oshins <jakeo@microsoft.com> Cc: Jiang Liu <jiang.liu@linux.intel.com> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Rafael J. Wysocki <rjw@rjwysocki.net> Link: http://lkml.kernel.org/r/1444737105-31573-7-git-send-email-marc.zyngier@arm.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-10-13irqdomain: Introduce a firmware-specific IRQ specifier structureMarc Zyngier1-0/+20
So far the closest thing to a generic IRQ specifier structure is of_phandle_args, which happens to be pretty OF specific (the of_node pointer in there is quite annoying). Let's introduce 'struct irq_fwspec' that can be used in place of of_phandle_args for OF, but also for other firmware implementations (that'd be ACPI). This is used together with a new 'translate' method that is the pendent of 'xlate'. We convert irq_create_of_mapping to use this new structure (with a small hack that will be removed later). Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Reviewed-and-tested-by: Hanjun Guo <hanjun.guo@linaro.org> Tested-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: <linux-arm-kernel@lists.infradead.org> Cc: Tomasz Nowicki <tomasz.nowicki@linaro.org> Cc: Suravee Suthikulpanit <Suravee.Suthikulpanit@amd.com> Cc: Graeme Gregory <graeme@xora.org.uk> Cc: Jake Oshins <jakeo@microsoft.com> Cc: Jiang Liu <jiang.liu@linux.intel.com> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Rafael J. Wysocki <rjw@rjwysocki.net> Link: http://lkml.kernel.org/r/1444737105-31573-5-git-send-email-marc.zyngier@arm.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-10-13irqdomain: Allow irq domain lookup by fwnodeMarc Zyngier1-2/+9
So far, our irq domains are still looked up by device node. Let's change this and allow a domain to be looked up using a fwnode_handle pointer. The existing interfaces are preserved with a couple of helpers. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Reviewed-and-tested-by: Hanjun Guo <hanjun.guo@linaro.org> Tested-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: <linux-arm-kernel@lists.infradead.org> Cc: Tomasz Nowicki <tomasz.nowicki@linaro.org> Cc: Suravee Suthikulpanit <Suravee.Suthikulpanit@amd.com> Cc: Graeme Gregory <graeme@xora.org.uk> Cc: Jake Oshins <jakeo@microsoft.com> Cc: Jiang Liu <jiang.liu@linux.intel.com> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Rafael J. Wysocki <rjw@rjwysocki.net> Link: http://lkml.kernel.org/r/1444737105-31573-4-git-send-email-marc.zyngier@arm.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-10-13irqdomain: Convert irqdomain-%3Eof_node to fwnodeMarc Zyngier1-2/+3
Now that we have everyone accessing the of_node field via the irq_domain_get_of_node accessor, it is pretty easy to swap it for a pointer to a fwnode_handle. This translates into a few limited changes in __irq_domain_add, and an updated irq_domain_get_of_node. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Reviewed-and-tested-by: Hanjun Guo <hanjun.guo@linaro.org> Tested-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: <linux-arm-kernel@lists.infradead.org> Cc: Tomasz Nowicki <tomasz.nowicki@linaro.org> Cc: Suravee Suthikulpanit <Suravee.Suthikulpanit@amd.com> Cc: Graeme Gregory <graeme@xora.org.uk> Cc: Jake Oshins <jakeo@microsoft.com> Cc: Jiang Liu <jiang.liu@linux.intel.com> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Rafael J. Wysocki <rjw@rjwysocki.net> Link: http://lkml.kernel.org/r/1444737105-31573-3-git-send-email-marc.zyngier@arm.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-10-09irqdomain: Add an accessor for the of_node fieldMarc Zyngier1-0/+5
As we're about to remove the of_node field from the irqdomain structure, introduce an accessor for it. Subsequent patches will take care of the actual repainting. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Cc: Jiang Liu <jiang.liu@linux.intel.com> Cc: Jason Cooper <jason@lakedaemon.net> Link: http://lkml.kernel.org/r/1444402211-1141-1-git-send-email-marc.zyngier@arm.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-07-30genirq: Add DOMAIN_BUS_NEXUS irqdomain propertyMarc Zyngier1-0/+1
Some IRQ domains are not designed to directly provide interrupts to devices, but strictly to be used by other domains. An example of this is the GICv3 ITS, which is completely bus agnostic, and on which it is possible to implement a PCI/MSI domain. Just introduce the irq_domain_bus_token property for now. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Cc: <linux-arm-kernel@lists.infradead.org> Cc: Yijing Wang <wangyijing@huawei.com> Cc: Ma Jun <majun258@huawei.com> Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: Duc Dang <dhdang@apm.com> Cc: Hanjun Guo <hanjun.guo@linaro.org> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Jiang Liu <jiang.liu@linux.intel.com> Cc: Jason Cooper <jason@lakedaemon.net> Link: http://lkml.kernel.org/r/1438091186-10244-11-git-send-email-marc.zyngier@arm.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-07-30of/platform: Assign MSI domain to platform deviceMarc Zyngier1-0/+1
As for PCI, we're able to populate the msi_domain field at probe time, provided that the device tree has an "msi-parent" property. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Cc: <linux-arm-kernel@lists.infradead.org> Cc: Yijing Wang <wangyijing@huawei.com> Cc: Ma Jun <majun258@huawei.com> Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: Duc Dang <dhdang@apm.com> Cc: Hanjun Guo <hanjun.guo@linaro.org> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Jiang Liu <jiang.liu@linux.intel.com> Cc: Jason Cooper <jason@lakedaemon.net> Link: http://lkml.kernel.org/r/1438091186-10244-9-git-send-email-marc.zyngier@arm.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-07-30PCI/MSI: Register irq domain with specific tokenMarc Zyngier1-0/+1
When creating a PCI/MSI domain, tag it with DOMAIN_BUS_PCI_MSI so that it can be looked-up using irq_find_matching_host(). Acked-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Hanjun Guo <hanjun.guo@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Cc: <linux-arm-kernel@lists.infradead.org> Cc: Yijing Wang <wangyijing@huawei.com> Cc: Ma Jun <majun258@huawei.com> Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: Duc Dang <dhdang@apm.com> Cc: Jiang Liu <jiang.liu@linux.intel.com> Cc: Jason Cooper <jason@lakedaemon.net> Link: http://lkml.kernel.org/r/1438091186-10244-3-git-send-email-marc.zyngier@arm.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>