summaryrefslogtreecommitdiff
path: root/include/linux/pci-acpi.h
AgeCommit message (Collapse)AuthorFilesLines
2017-11-02License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseGreg Kroah-Hartman1-0/+1
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-06-07ACPI: Switch to use generic guid_t in acpi_evaluate_dsm()Andy Shevchenko1-1/+1
acpi_evaluate_dsm() and friends take a pointer to a raw buffer of 16 bytes. Instead we convert them to use guid_t type. At the same time we convert current users. acpi_str_to_uuid() becomes useless after the conversion and it's safe to get rid of it. Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Cc: Borislav Petkov <bp@suse.de> Acked-by: Dan Williams <dan.j.williams@intel.com> Cc: Amir Goldstein <amir73il@gmail.com> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Reviewed-by: Jani Nikula <jani.nikula@intel.com> Acked-by: Jani Nikula <jani.nikula@intel.com> Cc: Ben Skeggs <bskeggs@redhat.com> Acked-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Acked-by: Joerg Roedel <jroedel@suse.de> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Cc: Yisen Zhuang <yisen.zhuang@huawei.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Felipe Balbi <felipe.balbi@linux.intel.com> Acked-by: Mathias Nyman <mathias.nyman@linux.intel.com> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Acked-by: Mark Brown <broonie@kernel.org> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2016-12-06PCI/ACPI: Extend pci_mcfg_lookup() to return ECAM config accessorsTomasz Nowicki1-1/+3
pci_mcfg_lookup() is the external interface to the generic MCFG code. Previously it merely looked up the ECAM base address for a given domain and bus range. We want a way to add MCFG quirks, some of which may require special config accessors and adjustments to the ECAM address range. Extend pci_mcfg_lookup() so it can return a pointer to a pci_ecam_ops structure and a struct resource for the ECAM address space. For now, it always returns &pci_generic_ecam_ops (the standard accessor) and the resource described by the MCFG. No functional changes intended. [bhelgaas: changelog] Signed-off-by: Tomasz Nowicki <tn@semihalf.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2016-06-11PCI/ACPI: Add generic MCFG table handlingTomasz Nowicki1-0/+2
On ACPI systems that support memory-mapped config space access, i.e., ECAM, the PCI Firmware Specification says the OS can learn where the ECAM space is from either: - the static MCFG table (for non-hotpluggable bridges), or - the _CBA method (for hotpluggable bridges) The current MCFG table handling code cannot be easily generalized owing to x86-specific quirks, which makes it hard to reuse on other architectures. Implement generic MCFG handling from scratch, including: - Simple MCFG table parsing (via pci_mmcfg_late_init() as in current x86) - MCFG region lookup for a (domain, bus_start, bus_end) tuple [bhelgaas: changelog] Signed-off-by: Tomasz Nowicki <tn@semihalf.com> Signed-off-by: Jayachandran C <jchandra@broadcom.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
2015-10-16PCI/ACPI: Add interface acpi_pci_root_create()Jiang Liu1-0/+24
Introduce common interface acpi_pci_root_create() and related data structures to create PCI root bus for ACPI PCI host bridges. It will be used to kill duplicated arch specific code for IA64 and x86. It may also help ARM64 in future. Reviewed-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Tested-by: Tony Luck <tony.luck@intel.com> Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-04-09PCI/ACPI: Optimize device state transition delaysAaron Lu1-0/+2
The PCI "ACPI additions for FW latency optimizations" ECN (link below) defines two functions in the PCI _DSM: Function 8, "Reset Delay," applies to the entire hierarchy below a PCI host bridge. If it returns one, the OS may assume that all devices in the hierarchy have already completed power-on reset delays. Function 9, "Device Readiness Durations," applies only to the object where it is located. It returns delay durations required after various events if the device requires less time than the spec requires. Delays from this function take precedence over the Reset Delay function. Add support for Reset Delay and part of Device Readiness Durations. [bhelgaas: changelog, comments] Link: https://www.pcisig.com/specifications/conventional/pci_firmware/ECN_fw_latency_optimization_final.pdf Signed-off-by: Aaron Lu <aaron.lu@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2015-04-08PCI: Make a shareable UUID for PCI firmware ACPI _DSMAaron Lu1-0/+3
The PCI Firmware Specification, r3.0, sec 4.6.4.1.3, defines a single UUID for an ACPI _DSM method to provide device-specific control functions. This _DSM method support several functions, including PCI Express Slot Information, PCI Express Slot Number, PCI Bus Capabilities, etc. Move the UUID definition from pci/pci-label.c, where it could be used only for one function, to pci/pci-acpi.c where it can be shared for all these functions. [bhelgaas: changelog] Signed-off-by: Aaron Lu <aaron.lu@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-11-05PCI: Don't oops on virtual buses in acpi_pci_get_bridge_handle()Yinghai Lu1-1/+6
acpi_pci_get_bridge_handle() returns the ACPI handle for the bridge device (either a host bridge or a PCI-to-PCI bridge) leading to a PCI bus. But SR-IOV virtual functions can be on a virtual bus with no bridge leading to it. Return a NULL acpi_handle in this case instead of trying to dereference the NULL pointer to the bridge. This fixes a NULL pointer dereference oops in pci_get_hp_params() when adding SR-IOV VF devices on virtual buses. [bhelgaas: changelog, add comment in code] Fixes: 6cd33649fa83 ("PCI: Add pci_configure_device() during enumeration") Link: https://bugzilla.kernel.org/show_bug.cgi?id=87591 Reported-by: Chao Zhou <chao.zhou@intel.com> Reported-by: Joerg Roedel <joro@8bytes.org> Signed-off-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2014-07-23ACPI / PM: Revork the handling of ACPI device wakeup notificationsRafael J. Wysocki1-4/+9
Since ACPI wakeup GPEs are going to be enabled during system suspend as well as for runtime wakeup by a subsequent patch and the same notify handlers will be used in both cases, rework the ACPI device wakeup notification framework so that the part specific to physical devices is always run asynchronously from the PM workqueue. This prevents runtime resume callbacks for those devices from being run during system suspend and resume which may not be appropriate, among other things. Also make ACPI device wakeup notification handling a bit more robust agaist subsequent removal of ACPI device objects, whould that ever happen, and create a wakeup source object for each ACPI device configured for wakeup so that wakeup notifications for those devices can wake up the system from the "freeze" sleep state. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-02-06ACPI / hotplug / PCI: Rework acpiphp_check_host_bridge()Rafael J. Wysocki1-2/+2
Since the only existing caller of acpiphp_check_host_bridge(), which is acpi_pci_root_scan_dependent(), already has a struct acpi_device pointer needed to obtain the ACPIPHP context, it doesn't make sense to execute acpi_bus_get_device() on its handle in acpiphp_handle_to_bridge() just in order to get that pointer back. For this reason, modify acpiphp_check_host_bridge() to take a struct acpi_device pointer as its argument and rearrange the code accordingly. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Tested-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2013-11-15ACPI: Eliminate the DEVICE_ACPI_HANDLE() macroRafael J. Wysocki1-2/+2
Since DEVICE_ACPI_HANDLE() is now literally identical to ACPI_HANDLE(), replace it with the latter everywhere and drop its definition from include/acpi.h. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-07-23ACPI / PCI: Make bus registration and unregistration symmetricRafael J. Wysocki1-6/+4
Since acpi_pci_slot_enumerate() and acpiphp_enumerate_slots() can get the ACPI device handle they need from bus->bridge, it is not necessary to pass that handle to them as an argument. Drop the second argument of acpi_pci_slot_enumerate() and acpiphp_enumerate_slots(), rework them to obtain the ACPI handle from bus->bridge and make acpi_pci_add_bus() and acpi_pci_remove_bus() entirely symmetrical. Tested-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Yinghai Lu <yinghai@kernel.org>
2013-05-18PCI: acpiphp: Re-enumerate devices when host bridge receives Bus CheckYinghai Lu1-0/+2
When a PCI host bridge device receives a Bus Check notification, we must re-enumerate starting with the bridge to discover changes (devices that have been added or removed). Prior to 668192b678 ("PCI: acpiphp: Move host bridge hotplug to pci_root.c"), this happened in _handle_hotplug_event_bridge(). After that commit, _handle_hotplug_event_bridge() is not installed for host bridges, and the host bridge notify handler, _handle_hotplug_event_root() did not re-enumerate. This patch adds re-enumeration to _handle_hotplug_event_root(). This fixes cases where we don't notice the addition or removal of PCI devices, e.g., the PCI-to-USB ExpressCard in the bugzilla below. [bhelgaas: changelog, references] Reference: https://lkml.kernel.org/r/CAAh6nkmbKR3HTqm5ommevsBwhL_u0N8Rk7Wsms_LfP=nBgKNew@mail.gmail.com Reference: https://bugzilla.kernel.org/show_bug.cgi?id=57961 Reported-by: Gavin Guo <tuffkidtt@gmail.com> Tested-by: Gavin Guo <tuffkidtt@gmail.com> Signed-off-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Jiang Liu <jiang.liu@huawei.com> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> CC: stable@vger.kernel.org # v3.9+
2013-04-13PCI: acpiphp: Do not use ACPI PCI subdriver mechanismJiang Liu1-0/+11
Previously the acpiphp driver registered itself as an ACPI PCI subdriver, so its callbacks were invoked when creating/destroying PCI root buses to manage ACPI-based PCI hotplug slots. But it doesn't handle P2P bridge hotplug events, so it will cause strange behaviour if there are hotplug slots associated with a hot-removed P2P bridge. This patch fixes this issue by: 1) Directly hooking into PCI core to update hotplug slot devices when creating/destroying PCI buses through: pci_{add|remove}_bus() -> acpi_pci_{add|remove}_bus() 2) Getting rid of unused ACPI PCI subdriver-related code It also cleans up unused code in the acpiphp driver. [bhelgaas: keep acpi_pci_add_bus() stub for CONFIG_ACPI=n] Signed-off-by: Jiang Liu <jiang.liu@huawei.com> Signed-off-by: Yijing Wang <wangyijing@huawei.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Yinghai Lu <yinghai@kernel.org> Cc: "Rafael J. Wysocki" <rafael.j.wysocki@intel.com> Cc: Toshi Kani <toshi.kani@hp.com>
2013-04-13PCI/ACPI: Handle PCI slot devices when creating/destroying PCI busesJiang Liu1-0/+12
Currently the pci_slot driver doesn't update PCI slot devices when PCI device hotplug event happens, which may cause memory leak and returning stale information to user. Now the pci_slot driver has been changed as built-in driver, so invoke PCI slot enumeration and destroy routines directly from the PCI core. And remove ACPI PCI sub-driver related code because it isn't needed any more. [bhelgas: removed "extern" from function declarations] Signed-off-by: Jiang Liu <jiang.liu@huawei.com> Signed-off-by: Yijing Wang <wangyijing@huawei.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Yinghai Lu <yinghai@kernel.org> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Cc: Toshi Kani <toshi.kani@hp.com>
2013-04-13PCI/ACPI: Prepare stub functions to handle ACPI PCI (hotplug) slotsJiang Liu1-1/+7
Prepare two stub functions to handle ACPI PCI slots and ACPI PCI hotplug slots, which will be invoked by the PCI core when creating/destroying PCI buses. It will be used to get rid of ACPI PCI subdrivers for pci_slot and acpiphp, and eventually remove the ACPI PCI subdriver mechanism. And it will also be used to handle ACPI PCI (hotplug) slots in a unified way, both at boot time and for PCI hotplug operations. Signed-off-by: Jiang Liu <jiang.liu@huawei.com> Signed-off-by: Yijing Wang <wangyijing@huawei.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Yinghai Lu <yinghai@kernel.org> Cc: "Rafael J. Wysocki" <rafael.j.wysocki@intel.com> Cc: Toshi Kani <toshi.kani@hp.com> Cc: Tony Luck <tony.luck@intel.com> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Myron Stowe <myron.stowe@redhat.com>
2012-09-25PCI/ACPI: Use DEVICE_ACPI_HANDLE rather than searching acpi_pci_rootsYinghai Lu1-6/+11
When we bind a device to an ACPI handle, the handle is stored in dev->archdata.acpi_handle. For such devices, there's no need to search the acpi_pci_roots list with acpi_get_pci_rootbridge_handle(); we can just use DEVICE_ACPI_HANDLE(dev) directly. [bhelgaas: changelog, reorder "if" to avoid negation] Signed-off-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Cc: Len Brown <lenb@kernel.org> Cc: linux-acpi@vger.kernel.org
2012-06-23PCI/ACPI: provide MMCONFIG address for PCI host bridgesJiang Liu1-0/+1
This patch provide MMCONFIG address for PCI host bridges, which will be used to support host bridge hotplug. It gets MMCONFIG address by evaluating _CBA method if available. Reviewed-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Jiang Liu <liuj97@gmail.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2011-01-16PCI / ACPI: Fix build of the AER driver for CONFIG_ACPI unsetRafael J. Wysocki1-3/+0
After commit 415e12b23792 ("PCI/ACPI: Request _OSC control once for each root bridge (v3)") include/linux/pci-acpi.h is included by drivers/pci/pcie/aer/aerdrv.c and if CONFIG_ACPI is unset, the bogus and unnecessary alternative definition of acpi_find_root_bridge_handle() causes a build error to occur. Remove the offending piece of garbage. Reported-and-tested-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-01-14PCI/ACPI: Request _OSC control once for each root bridge (v3)Rafael J. Wysocki1-0/+6
Move the evaluation of acpi_pci_osc_control_set() (to request control of PCI Express native features) into acpi_pci_root_add() to avoid calling it many times for the same root complex with the same arguments. Additionally, check if all of the requisite _OSC support bits are set before calling acpi_pci_osc_control_set() for a given root complex. References: https://bugzilla.kernel.org/show_bug.cgi?id=20232 Reported-by: Ozan Caglayan <ozan@pardus.org.tr> Tested-by: Ozan Caglayan <ozan@pardus.org.tr> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-02-23PCI / ACPI / PM: Platform support for PCI PME wake-upRafael J. Wysocki1-0/+7
Although the majority of PCI devices can generate PMEs that in principle may be used to wake up devices suspended at run time, platform support is generally necessary to convert PMEs into wake-up events that can be delivered to the kernel. If ACPI is used for this purpose, PME signals generated by a PCI device will trigger the ACPI GPE associated with the device to generate an ACPI wake-up event that we can set up a handler for, provided that everything is configured correctly. Unfortunately, the subset of PCI devices that have GPEs associated with them is quite limited. The devices without dedicated GPEs have to rely on the GPEs associated with other devices (in the majority of cases their upstream bridges and, possibly, the root bridge) to generate ACPI wake-up events in response to PME signals from them. Add ACPI platform support for PCI PME wake-up: o Add a framework making is possible to use ACPI system notify handlers for run-time PM. o Add new PCI platform callback ->run_wake() to struct pci_platform_pm_ops allowing us to enable/disable the platform to generate wake-up events for given device. Implemet this callback for the ACPI platform. o Define ACPI wake-up handlers for PCI devices and PCI root buses and make the PCI-ACPI binding code register wake-up notifiers for all PCI devices present in the ACPI tables. o Add function pci_dev_run_wake() which can be used by PCI drivers to check if given device is capable of generating wake-up events at run time. Developed in cooperation with Matthew Garrett <mjg@redhat.com>. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-06-17PCI: use pci_is_root_bus() in acpi_find_root_bridge_handle()Kenji Kaneshige1-1/+1
Use pci_is_root_bus() in acpi_find_root_bridge_handle() to check if the pci bus is root, for code consistency. Reviewed-by: Alex Chiang <achiang@hp.com> Reviewed-by: Grant Grundler <grundler@parisc-linux.org> Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-06-17PCI: use pci_is_root_bus() in acpi_pci_get_bridge_handle()Kenji Kaneshige1-1/+1
Use pci_is_root_bus() in acpi_pci_get_bridge_handle() to check if the pci bus is root, for code consistency. Reviewed-by: Grant Grundler <grundler@parisc-linux.org> Reviewed-by: Alex Chiang <achiang@hp.com> Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-03-20PCI/ACPI: fix wrong assumption in acpi_find_root_bridge_handleKenji Kaneshige1-6/+6
Current acpi_find_root_bridge_handle() has a assumption that pci_bus->self is NULL on the root pci bus. But it might not be true on some platforms. Because of this wrong assumption, current acpi_find_root_bridge_handle() might cause endless loop. We must check pci_bus->parent instead. Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-03-20PCI/ACPI: fix wrong assumption in acpi_pci_get_bridge_handleKenji Kaneshige1-5/+4
Current acpi_pci_get_bridge_handle() has an assumption that pci_bus->self is NULL on the root pci bus. But it might not true on some platforms. Because of this wrong assumption, current acpi_pci_get_bridge_handle() might return improper ACPI handle. We must check pci_bus->parent instead. This bug is the root cause of the following kernel panic reported by James Bottomley. This problem was introduced by the commit e8c331e963c58b83db24b7d0e39e8c07f687dbc6. The immediate cause was acpi_pci_get_bridge_handle() returned NULL unexpectedly and it was passed as the second argument of acpi_walk_namespace(). pci_hotplug: PCI Hot Plug PCI Core version: 0.5 acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 BUG: unable to handle kernel NULL pointer dereference at 0000000000000010 IP: [<ffffffff8039646f>] acpi_ns_get_next_node+0xb/0x3c PGD 0 Oops: 0000 [#1] SMP last sysfs file: CPU 0 Modules linked in: Pid: 1, comm: swapper Not tainted 2.6.28 #1 RIP: 0010:[<ffffffff8039646f>] [<ffffffff8039646f>] acpi_ns_get_next_node+0xb/0x3c RSP: 0018:ffff88007f87fd30 EFLAGS: 00010246 RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000 RBP: 0000000000000000 R08: ffffffff8037d260 R09: ffff88007f87fdfc R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000001 R13: 0000000000000000 R14: 0000000000000001 R15: 0000000000000000 FS: 0000000000000000(0000) GS:ffffffff80742040(0000) knlGS:0000000000000000 CS: 0010 DS: 0018 ES: 0018 CR0: 000000008005003b CR2: 0000000000000010 CR3: 0000000000201000 CR4: 00000000000006a0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Process swapper (pid: 1, threadinfo ffff88007f87e000, task ffff88007f875040) Stack: 0000000000000000 ffffffff803964f5 ffff88007f81b728 0000000000001001 ffff88007f87fdfc ffffffff8037d260 0000000600000001 0000000000000000 ffffffff8037d260 0000000000000000 0000000000000001 ffff88007f87fdfc Call Trace: [<ffffffff803964f5>] acpi_ns_walk_namespace+0x55/0x138 [<ffffffff8037d260>] is_pci_dock_device+0x0/0x20 [<ffffffff8037d260>] is_pci_dock_device+0x0/0x20 [<ffffffff80394a9e>] acpi_walk_namespace+0x5f/0x83 [<ffffffff8037dd33>] detect_ejectable_slots+0x53/0x70 [<ffffffff8037de38>] add_bridge+0xe8/0x200 [<ffffffff80394aaa>] acpi_walk_namespace+0x6b/0x83 [<ffffffff803a4ad1>] acpi_pci_register_driver+0x48/0x61 [<ffffffff806fc5df>] acpiphp_init+0x0/0x58 [<ffffffff806fc732>] acpiphp_glue_init+0x4c/0x5a [<ffffffff806fc616>] acpiphp_init+0x37/0x58 [<ffffffff8020903b>] _stext+0x3b/0x180 [<ffffffff80312598>] create_proc_entry+0x58/0xa0 [<ffffffff802815d1>] register_irq_proc+0xc1/0xe0 [<ffffffff806db64b>] kernel_init+0x152/0x1ac [<ffffffff8023d970>] finish_task_switch+0x0/0x110 [<ffffffff8020ca7a>] child_rip+0xa/0x20 [<ffffffff8020c47c>] restore_args+0x0/0x30 [<ffffffff806db4f9>] kernel_init+0x0/0x1ac [<ffffffff8020ca70>] child_rip+0x0/0x20 Code: 89 c2 48 8b 00 48 85 c0 75 f5 48 8b 45 00 48 89 02 44 88 65 09 48 89 5d 00 31 c0 5b 5d 41 5c c3 53 48 85 d2 89 fb 48 89 d7 75 06 <48> 8b 56 10 eb 08 e8 73 f1 ff ff 48 89 c2 85 db 74 1a eb 13 0f RIP [<ffffffff8039646f>] acpi_ns_get_next_node+0xb/0x3c RSP <ffff88007f87fd30> CR2: 0000000000000010 ---[ end trace a7919e7f17c0a725 ]--- Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-03-20PCI/ACPI: rename pci_osc_control_set()Kenji Kaneshige1-45/+0
- Rename pci_osc_control_set() to acpi_pci_osc_control_set() according to the other API names in drivers/acpi/pci_root.c. - Move _OSC related definitions to include/linux/acpi.h because _OSC related API is implemented in drivers/acpi/pci_root.c now. Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Reviewed-by: Andrew Patterson <andrew.patterson@hp.com> Tested-by: Andrew Patterson <andrew.patterson@hp.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-03-20PCI/ACPI: move _OSC code to pci_root.cKenji Kaneshige1-1/+0
Move PCI _OSC management code from drivers/pci/pci-acpi.c to drivers/acpi/pci_root.c. The benefits are - We no longer need struct osc_data and its management code (contents are moved to struct acpi_pci_root). This simplify the code, and we no longer care about kmalloc() failure. - We can make pci_acpi_osc_support() be a static function, which is called only from drivers/acpi/pci_root.c. Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Reviewed-by: Andrew Patterson <andrew.patterson@hp.com> Tested-by: Andrew Patterson <andrew.patterson@hp.com> Acked-by: Alex Chiang <achiang@hp.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-01-07PCI hotplug: introduce functions for ACPI slot detectionKenji Kaneshige1-0/+9
Some ACPI related PCI hotplug code can be shared among PCI hotplug drivers. This patch introduces the following functions in drivers/pci/hotplug/acpi_pcihp.c to share the code, and changes acpiphp and pciehp to use them. - int acpi_pci_detect_ejectable(struct pci_bus *pbus) This checks if the specified PCI bus has ejectable slots. - int acpi_pci_check_ejectable(struct pci_bus *pbus, acpi_handle handle) This checks if the specified handle is ejectable ACPI PCI slot. The 'pbus' parameter is needed to check if 'handle' is PCI related ACPI object. This patch also introduces the following inline function in include/linux/pci-acpi.h, which is useful to get ACPI handle of the PCI bridge from struct pci_bus of the bridge's secondary bus. - static inline acpi_handle acpi_pci_get_bridge_handle(struct pci_bus *pbus) This returns ACPI handle of the PCI bridge which generates PCI bus specified by 'pbus'. Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-01-07ACPI/PCI: remove obsolete _OSC capability support functionsAndrew Patterson1-11/+0
The acpi_query_osc, __pci_osc_support_set, pci_osc_support_set, and pcie_osc_support_set functions have been obsoleted in favor of setting these capabilities during root bridge discovery with pci_acpi_osc_support. There are no longer any callers of these functions, so remove them. Signed-off-by: Andrew Patterson <andrew.patterson@hp.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-01-07ACPI/PCI: call _OSC support during root bridge discoveryAndrew Patterson1-0/+1
Add pci_acpi_osc_support() and call it when a PCI bridge is added. This allows us to avoid having every individual PCI root bridge driver call _OSC support for every root bridge in their probe functions, a significant savings in boot time. Signed-off-by: Matthew Wilcox <willy@linux.intel.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-01-07ACPI/PCI: include missing acpi.h file in pci-acpi.h.Andrew Patterson1-0/+2
The pci-acpi.h file will not compile without including linux/acpi.h. Signed-off-by: Matthew Wilcox <willy@linux.intel.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2008-08-19PCI: add acpi_find_root_bridge_handleJiri Slaby1-0/+11
Consolidate finding of a root bridge and getting its handle to the one inline function. It's cut & pasted on multiple places. Use this new inline in those. Cc: kristen.c.accardi@intel.com Acked-by: Alex Chiang <achiang@hp.com> Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2008-02-02PCI ACPI: Added a function to register _OSC with only PCIe devices.Andrew Patterson1-1/+10
The function pci_osc_support_set() traverses every root bridge when checking for _OSC support for a capability. It quits as soon as it finds a device/bridge that doesn't support the requested capability. This won't work for systems that have mixed PCI and PCIe bridges when checking for PCIe features. I split this function into two -- pci_osc_support_set() and pcie_osc_support_set(). The latter is used when only PCIe devices should be traversed. Signed-off-by: Andrew Patterson <andrew.patterson@hp.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-06-12[PATCH] PCI: fix pciehp compile issue when CONFIG_ACPI is not enabledakpm@osdl.org1-1/+1
Fix build error when CONFIG_ACPI not defined Signed-off-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-11-11[PATCH] pciehp: request control of each hotplug controller individuallyrajesh.shah@intel.com1-2/+3
This patch tweaks the way pciehp requests control of the hotplug hardware from BIOS. It now tries to invoke the ACPI _OSC method for a specific hotplug controller only, rather than walking the entire acpi namespace invoking all possible _OSC methods under all host bridges. This allows us to gain control of each hotplug controller individually, even if BIOS fails to give us control of some other hotplug controller in the system. Signed-off-by: Rajesh Shah <rajesh.shah@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-04-17Linux-2.6.12-rc2Linus Torvalds1-0/+61
Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!