summaryrefslogtreecommitdiff
path: root/include/linux/pid.h
AgeCommit message (Collapse)AuthorFilesLines
2023-06-30pid: Replace struct pid 1-element array with flex-arrayKees Cook1-1/+1
For pid namespaces, struct pid uses a dynamically sized array member, "numbers". This was implemented using the ancient 1-element fake flexible array, which has been deprecated for decades. Replace it with a C99 flexible array, refactor the array size calculations to use struct_size(), and address elements via indexes. Note that the static initializer (which defines a single element) works as-is, and requires no special handling. Without this, CONFIG_UBSAN_BOUNDS (and potentially CONFIG_FORTIFY_SOURCE) will trigger bounds checks: https://lore.kernel.org/lkml/20230517-bushaltestelle-super-e223978c1ba6@brauner Cc: Christian Brauner <brauner@kernel.org> Cc: Jan Kara <jack@suse.cz> Cc: Jeff Xu <jeffxu@google.com> Cc: Andreas Gruenbacher <agruenba@redhat.com> Cc: Daniel Verkamp <dverkamp@chromium.org> Cc: "Paul E. McKenney" <paulmck@kernel.org> Cc: Jeff Xu <jeffxu@google.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Boqun Feng <boqun.feng@gmail.com> Cc: Luis Chamberlain <mcgrof@kernel.org> Cc: Frederic Weisbecker <frederic@kernel.org> Reported-by: syzbot+ac3b41786a2d0565b6d5@syzkaller.appspotmail.com [brauner: dropped unrelated changes and remove 0 with NULL cast] Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Christian Brauner <brauner@kernel.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2023-04-03pid: add pidfd_prepare()Christian Brauner1-0/+1
Add a new helper that allows to reserve a pidfd and allocates a new pidfd file that stashes the provided struct pid. This will allow us to remove places that either open code this function or that call pidfd_create() but then have to call close_fd() because there are still failure points after pidfd_create() has been called. Reviewed-by: Jan Kara <jack@suse.cz> Message-Id: <20230327-pidfd-file-api-v1-1-5c0e9a3158e4@kernel.org> Signed-off-by: Christian Brauner <brauner@kernel.org>
2021-10-14pid: add pidfd_get_task() helperChristian Brauner1-0/+1
The number of system calls making use of pidfds is constantly increasing. Some of those new system calls duplicate the code to turn a pidfd into task_struct it refers to. Give them a simple helper for this. Link: https://lore.kernel.org/r/20211004125050.1153693-2-christian.brauner@ubuntu.com Link: https://lore.kernel.org/r/20211011133245.1703103-2-brauner@kernel.org Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Suren Baghdasaryan <surenb@google.com> Cc: Matthew Bobrowski <repnop@google.com> Cc: Alexander Duyck <alexander.h.duyck@linux.intel.com> Cc: David Hildenbrand <david@redhat.com> Cc: Jan Kara <jack@suse.cz> Cc: Minchan Kim <minchan@kernel.org> Reviewed-by: Matthew Bobrowski <repnop@google.com> Acked-by: David Hildenbrand <david@redhat.com> Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
2021-08-10kernel/pid.c: remove static qualifier from pidfd_create()Matthew Bobrowski1-0/+1
With the idea of returning pidfds from the fanotify API, we need to expose a mechanism for creating pidfds. We drop the static qualifier from pidfd_create() and add its declaration to linux/pid.h so that the pidfd_create() helper can be called from other kernel subsystems i.e. fanotify. Link: https://lore.kernel.org/r/0c68653ec32f1b7143301f0231f7ed14062fd82b.1628398044.git.repnop@google.com Signed-off-by: Matthew Bobrowski <repnop@google.com> Acked-by: Christian Brauner <christian.brauner@ubuntu.com> Signed-off-by: Jan Kara <jack@suse.cz>
2020-10-18pid: move pidfd_get_pid() to pid.cMinchan Kim1-0/+1
process_madvise syscall needs pidfd_get_pid function to translate pidfd to pid so this patch move the function to kernel/pid.c. Suggested-by: Alexander Duyck <alexander.h.duyck@linux.intel.com> Signed-off-by: Minchan Kim <minchan@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Suren Baghdasaryan <surenb@google.com> Reviewed-by: Alexander Duyck <alexander.h.duyck@linux.intel.com> Reviewed-by: Vlastimil Babka <vbabka@suse.cz> Acked-by: Christian Brauner <christian.brauner@ubuntu.com> Acked-by: David Rientjes <rientjes@google.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Jann Horn <jannh@google.com> Cc: Brian Geffon <bgeffon@google.com> Cc: Daniel Colascione <dancol@google.com> Cc: Joel Fernandes <joel@joelfernandes.org> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: John Dias <joaodias@google.com> Cc: Kirill Tkhai <ktkhai@virtuozzo.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Oleksandr Natalenko <oleksandr@redhat.com> Cc: Sandeep Patil <sspatil@google.com> Cc: SeongJae Park <sj38.park@gmail.com> Cc: SeongJae Park <sjpark@amazon.de> Cc: Shakeel Butt <shakeelb@google.com> Cc: Sonny Rao <sonnyrao@google.com> Cc: Tim Murray <timmurray@google.com> Cc: Christian Brauner <christian.brauner@ubuntu.com> Cc: Florian Weimer <fw@deneb.enyo.de> Cc: <linux-man@vger.kernel.org> Link: http://lkml.kernel.org/r/20200302193630.68771-5-minchan@kernel.org Link: http://lkml.kernel.org/r/20200622192900.22757-3-minchan@kernel.org Link: https://lkml.kernel.org/r/20200901000633.1920247-3-minchan@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-04Merge branch 'proc-linus' of ↵Linus Torvalds1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace Pull proc updates from Eric Biederman: "This has four sets of changes: - modernize proc to support multiple private instances - ensure we see the exit of each process tid exactly - remove has_group_leader_pid - use pids not tasks in posix-cpu-timers lookup Alexey updated proc so each mount of proc uses a new superblock. This allows people to actually use mount options with proc with no fear of messing up another mount of proc. Given the kernel's internal mounts of proc for things like uml this was a real problem, and resulted in Android's hidepid mount options being ignored and introducing security issues. The rest of the changes are small cleanups and fixes that came out of my work to allow this change to proc. In essence it is swapping the pids in de_thread during exec which removes a special case the code had to handle. Then updating the code to stop handling that special case" * 'proc-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace: proc: proc_pid_ns takes super_block as an argument remove the no longer needed pid_alive() check in __task_pid_nr_ns() posix-cpu-timers: Replace __get_task_for_clock with pid_for_clock posix-cpu-timers: Replace cpu_timer_pid_type with clock_pid_type posix-cpu-timers: Extend rcu_read_lock removing task_struct references signal: Remove has_group_leader_pid exec: Remove BUG_ON(has_group_leader_pid) posix-cpu-timer: Unify the now redundant code in lookup_task posix-cpu-timer: Tidy up group_leader logic in lookup_task proc: Ensure we see the exit of each process tid exactly once rculist: Add hlists_swap_heads_rcu proc: Use PIDTYPE_TGID in next_tgid Use proc_pid_ns() to get pid_namespace from the proc superblock proc: use named enums for better readability proc: use human-readable values for hidepid docs: proc: add documentation for "hidepid=4" and "subset=pid" options and new mount behavior proc: add option to mount only a pids subset proc: instantiate only pids that we can ptrace on 'hidepid=4' mount option proc: allow to mount many instances of proc in one pid namespace proc: rename struct proc_fs_info to proc_fs_opts
2020-04-29proc: Ensure we see the exit of each process tid exactly onceEric W. Biederman1-0/+1
When the thread group leader changes during exec and the old leaders thread is reaped proc_flush_pid will flush the dentries for the entire process because the leader still has it's original pid. Fix this by exchanging the pids in an rcu safe manner, and wrapping the code to do that up in a helper exchange_tids. When I removed switch_exec_pids and introduced this behavior in d73d65293e3e ("[PATCH] pidhash: kill switch_exec_pids") there really was nothing that cared as flushing happened with the cached dentry and de_thread flushed both of them on exec. This lack of fully exchanging pids became a problem a few months later when I introduced 48e6484d4902 ("[PATCH] proc: Rewrite the proc dentry flush on exit optimization"). Which overlooked the de_thread case was no longer swapping pids, and I was looking up proc dentries by task->pid. The current behavior isn't properly a bug as everything in proc will continue to work correctly just a little bit less efficiently. Fix this just so there are no little surprise corner cases waiting to bite people. -- Oleg points out this could be an issue in next_tgid in proc where has_group_leader_pid is called, and reording some of the assignments should fix that. -- Oleg points out this will break the 10 year old hack in __exit_signal.c > /* > * This can only happen if the caller is de_thread(). > * FIXME: this is the temporary hack, we should teach > * posix-cpu-timers to handle this case correctly. > */ > if (unlikely(has_group_leader_pid(tsk))) > posix_cpu_timers_exit_group(tsk); The code in next_tgid has been changed to use PIDTYPE_TGID, and the posix cpu timers code has been fixed so it does not need the 10 year old hack, so this should be safe to merge now. Link: https://lore.kernel.org/lkml/87h7x3ajll.fsf_-_@x220.int.ebiederm.org/ Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Acked-by: Oleg Nesterov <oleg@redhat.com> Fixes: 48e6484d4902 ("[PATCH] proc: Rewrite the proc dentry flush on exit optimization"). Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
2020-04-27sysctl: remove all extern declaration from sysctl.cChristoph Hellwig1-0/+3
Extern declarations in .c files are a bad style and can lead to mismatches. Use existing definitions in headers where they exist, and otherwise move the external declarations to suitable header files. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2020-04-09proc: Use a dedicated lock in struct pidEric W. Biederman1-0/+1
syzbot wrote: > ======================================================== > WARNING: possible irq lock inversion dependency detected > 5.6.0-syzkaller #0 Not tainted > -------------------------------------------------------- > swapper/1/0 just changed the state of lock: > ffffffff898090d8 (tasklist_lock){.+.?}-{2:2}, at: send_sigurg+0x9f/0x320 fs/fcntl.c:840 > but this lock took another, SOFTIRQ-unsafe lock in the past: > (&pid->wait_pidfd){+.+.}-{2:2} > > > and interrupts could create inverse lock ordering between them. > > > other info that might help us debug this: > Possible interrupt unsafe locking scenario: > > CPU0 CPU1 > ---- ---- > lock(&pid->wait_pidfd); > local_irq_disable(); > lock(tasklist_lock); > lock(&pid->wait_pidfd); > <Interrupt> > lock(tasklist_lock); > > *** DEADLOCK *** > > 4 locks held by swapper/1/0: The problem is that because wait_pidfd.lock is taken under the tasklist lock. It must always be taken with irqs disabled as tasklist_lock can be taken from interrupt context and if wait_pidfd.lock was already taken this would create a lock order inversion. Oleg suggested just disabling irqs where I have added extra calls to wait_pidfd.lock. That should be safe and I think the code will eventually do that. It was rightly pointed out by Christian that sharing the wait_pidfd.lock was a premature optimization. It is also true that my pre-merge window testing was insufficient. So remove the premature optimization and give struct pid a dedicated lock of it's own for struct pid things. I have verified that lockdep sees all 3 paths where we take the new pid->lock and lockdep does not complain. It is my current day dream that one day pid->lock can be used to guard the task lists as well and then the tasklist_lock won't need to be held to deliver signals. That will require taking pid->lock with irqs disabled. Acked-by: Christian Brauner <christian.brauner@ubuntu.com> Link: https://lore.kernel.org/lkml/00000000000011d66805a25cd73f@google.com/ Cc: Oleg Nesterov <oleg@redhat.com> Cc: Christian Brauner <christian.brauner@ubuntu.com> Reported-by: syzbot+343f75cdeea091340956@syzkaller.appspotmail.com Reported-by: syzbot+832aabf700bc3ec920b9@syzkaller.appspotmail.com Reported-by: syzbot+f675f964019f884dbd0f@syzkaller.appspotmail.com Reported-by: syzbot+a9fb1457d720a55d6dc5@syzkaller.appspotmail.com Fixes: 7bc3e6e55acf ("proc: Use a list of inodes to flush from proc") Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2020-02-24proc: Use a list of inodes to flush from procEric W. Biederman1-0/+1
Rework the flushing of proc to use a list of directory inodes that need to be flushed. The list is kept on struct pid not on struct task_struct, as there is a fixed connection between proc inodes and pids but at least for the case of de_thread the pid of a task_struct changes. This removes the dependency on proc_mnt which allows for different mounts of proc having different mount options even in the same pid namespace and this allows for the removal of proc_mnt which will trivially the first mount of proc to honor it's mount options. This flushing remains an optimization. The functions pid_delete_dentry and pid_revalidate ensure that ordinary dcache management will not attempt to use dentries past the point their respective task has died. When unused the shrinker will eventually be able to remove these dentries. There is a case in de_thread where proc_flush_pid can be called early for a given pid. Which winds up being safe (if suboptimal) as this is just an optiimization. Only pid directories are put on the list as the other per pid files are children of those directories and d_invalidate on the directory will get them as well. So that the pid can be used during flushing it's reference count is taken in release_task and dropped in proc_flush_pid. Further the call of proc_flush_pid is moved after the tasklist_lock is released in release_task so that it is certain that the pid has already been unhashed when flushing it taking place. This removes a small race where a dentry could recreated. As struct pid is supposed to be small and I need a per pid lock I reuse the only lock that currently exists in struct pid the the wait_pidfd.lock. The net result is that this adds all of this functionality with just a little extra list management overhead and a single extra pointer in struct pid. v2: Initialize pid->inodes. I somehow failed to get that initialization into the initial version of the patch. A boot failure was reported by "kernel test robot <lkp@intel.com>", and failure to initialize that pid->inodes matches all of the reported symptoms. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
2019-11-16fork: extend clone3() to support setting a PIDAdrian Reber1-1/+2
The main motivation to add set_tid to clone3() is CRIU. To restore a process with the same PID/TID CRIU currently uses /proc/sys/kernel/ns_last_pid. It writes the desired (PID - 1) to ns_last_pid and then (quickly) does a clone(). This works most of the time, but it is racy. It is also slow as it requires multiple syscalls. Extending clone3() to support *set_tid makes it possible restore a process using CRIU without accessing /proc/sys/kernel/ns_last_pid and race free (as long as the desired PID/TID is available). This clone3() extension places the same restrictions (CAP_SYS_ADMIN) on clone3() with *set_tid as they are currently in place for ns_last_pid. The original version of this change was using a single value for set_tid. At the 2019 LPC, after presenting set_tid, it was, however, decided to change set_tid to an array to enable setting the PID of a process in multiple PID namespaces at the same time. If a process is created in a PID namespace it is possible to influence the PID inside and outside of the PID namespace. Details also in the corresponding selftest. To create a process with the following PIDs: PID NS level Requested PID 0 (host) 31496 1 42 2 1 For that example the two newly introduced parameters to struct clone_args (set_tid and set_tid_size) would need to be: set_tid[0] = 1; set_tid[1] = 42; set_tid[2] = 31496; set_tid_size = 3; If only the PIDs of the two innermost nested PID namespaces should be defined it would look like this: set_tid[0] = 1; set_tid[1] = 42; set_tid_size = 2; The PID of the newly created process would then be the next available free PID in the PID namespace level 0 (host) and 42 in the PID namespace at level 1 and the PID of the process in the innermost PID namespace would be 1. The set_tid array is used to specify the PID of a process starting from the innermost nested PID namespaces up to set_tid_size PID namespaces. set_tid_size cannot be larger then the current PID namespace level. Signed-off-by: Adrian Reber <areber@redhat.com> Reviewed-by: Christian Brauner <christian.brauner@ubuntu.com> Reviewed-by: Oleg Nesterov <oleg@redhat.com> Reviewed-by: Dmitry Safonov <0x7f454c46@gmail.com> Acked-by: Andrei Vagin <avagin@gmail.com> Link: https://lore.kernel.org/r/20191115123621.142252-1-areber@redhat.com Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
2019-10-17pidfd: check pid has attached task in fdinfoChristian Brauner1-0/+4
Currently, when a task is dead we still print the pid it used to use in the fdinfo files of its pidfds. This doesn't make much sense since the pid may have already been reused. So verify that the task is still alive by introducing the pid_has_task() helper which will be used by other callers in follow-up patches. If the task is not alive anymore, we will print -1. This allows us to differentiate between a task not being present in a given pid namespace - in which case we already print 0 - and a task having been reaped. Note that this uses PIDTYPE_PID for the check. Technically, we could've checked PIDTYPE_TGID since pidfds currently only refer to thread-group leaders but if they won't anymore in the future then this check becomes problematic without it being immediately obvious to non-experts imho. If a thread is created via clone(CLONE_THREAD) than struct pid has a single non-empty list pid->tasks[PIDTYPE_PID] and this pid can't be used as a PIDTYPE_TGID meaning pid->tasks[PIDTYPE_TGID] will return NULL even though the thread-group leader might still be very much alive. So checking PIDTYPE_PID is fine and is easier to maintain should we ever allow pidfds to refer to threads. Cc: Jann Horn <jannh@google.com> Cc: Christian Kellner <christian@kellner.me> Cc: linux-api@vger.kernel.org Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com> Reviewed-by: Oleg Nesterov <oleg@redhat.com> Link: https://lore.kernel.org/r/20191017101832.5985-1-christian.brauner@ubuntu.com
2019-08-01pidfd: add P_PIDFD to waitid()Christian Brauner1-0/+4
This adds the P_PIDFD type to waitid(). One of the last remaining bits for the pidfd api is to make it possible to wait on pidfds. With P_PIDFD added to waitid() the parts of userspace that want to use the pidfd api to exclusively manage processes can do so now. One of the things this will unblock in the future is the ability to make it possible to retrieve the exit status via waitid(P_PIDFD) for non-parent processes if handed a _suitable_ pidfd that has this feature set. This is similar to what you can do on FreeBSD with kqueue(). It might even end up being possible to wait on a process as a non-parent if an appropriate property is enabled on the pidfd. With P_PIDFD no scoping of the process identified by the pidfd is possible, i.e. it explicitly blocks things such as wait4(-1), wait4(0), waitid(P_ALL), waitid(P_PGID) etc. It only allows for semantics equivalent to wait4(pid), waitid(P_PID). Users that need scoping should rely on pid-based wait*() syscalls for now. Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com> Reviewed-by: Kees Cook <keescook@chromium.org> Reviewed-by: Oleg Nesterov <oleg@redhat.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Joel Fernandes (Google) <joel@joelfernandes.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: David Howells <dhowells@redhat.com> Cc: Jann Horn <jannh@google.com> Cc: Andy Lutomirsky <luto@kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Aleksa Sarai <cyphar@cyphar.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Link: https://lore.kernel.org/r/20190727222229.6516-2-christian@brauner.io
2019-07-17kernel/pid.c: convert struct pid count to refcount_tJoel Fernandes (Google)1-2/+3
struct pid's count is an atomic_t field used as a refcount. Use refcount_t for it which is basically atomic_t but does additional checking to prevent use-after-free bugs. For memory ordering, the only change is with the following: - if ((atomic_read(&pid->count) == 1) || - atomic_dec_and_test(&pid->count)) { + if (refcount_dec_and_test(&pid->count)) { kmem_cache_free(ns->pid_cachep, pid); Here the change is from: Fully ordered --> RELEASE + ACQUIRE (as per refcount-vs-atomic.rst) This ACQUIRE should take care of making sure the free happens after the refcount_dec_and_test(). The above hunk also removes atomic_read() since it is not needed for the code to work and it is unclear how beneficial it is. The removal lets refcount_dec_and_test() check for cases where get_pid() happened before the object was freed. Link: http://lkml.kernel.org/r/20190701183826.191936-1-joel@joelfernandes.org Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org> Reviewed-by: Andrea Parri <andrea.parri@amarulasolutions.com> Reviewed-by: Kees Cook <keescook@chromium.org> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Will Deacon <will.deacon@arm.com> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Elena Reshetova <elena.reshetova@intel.com> Cc: Jann Horn <jannh@google.com> Cc: Eric W. Biederman <ebiederm@xmission.com> Cc: KJ Tsanaktsidis <ktsanaktsidis@zendesk.com> Cc: Michal Hocko <mhocko@suse.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-06-28pidfd: add polling supportJoel Fernandes (Google)1-0/+3
This patch adds polling support to pidfd. Android low memory killer (LMK) needs to know when a process dies once it is sent the kill signal. It does so by checking for the existence of /proc/pid which is both racy and slow. For example, if a PID is reused between when LMK sends a kill signal and checks for existence of the PID, since the wrong PID is now possibly checked for existence. Using the polling support, LMK will be able to get notified when a process exists in race-free and fast way, and allows the LMK to do other things (such as by polling on other fds) while awaiting the process being killed to die. For notification to polling processes, we follow the same existing mechanism in the kernel used when the parent of the task group is to be notified of a child's death (do_notify_parent). This is precisely when the tasks waiting on a poll of pidfd are also awakened in this patch. We have decided to include the waitqueue in struct pid for the following reasons: 1. The wait queue has to survive for the lifetime of the poll. Including it in task_struct would not be option in this case because the task can be reaped and destroyed before the poll returns. 2. By including the struct pid for the waitqueue means that during de_thread(), the new thread group leader automatically gets the new waitqueue/pid even though its task_struct is different. Appropriate test cases are added in the second patch to provide coverage of all the cases the patch is handling. Cc: Andy Lutomirski <luto@amacapital.net> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Daniel Colascione <dancol@google.com> Cc: Jann Horn <jannh@google.com> Cc: Tim Murray <timmurray@google.com> Cc: Jonathan Kowalski <bl0pbl33p@gmail.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Kees Cook <keescook@chromium.org> Cc: David Howells <dhowells@redhat.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: kernel-team@android.com Reviewed-by: Oleg Nesterov <oleg@redhat.com> Co-developed-by: Daniel Colascione <dancol@google.com> Signed-off-by: Daniel Colascione <dancol@google.com> Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org> Signed-off-by: Christian Brauner <christian@brauner.io>
2019-05-07clone: add CLONE_PIDFDChristian Brauner1-0/+2
This patchset makes it possible to retrieve pid file descriptors at process creation time by introducing the new flag CLONE_PIDFD to the clone() system call. Linus originally suggested to implement this as a new flag to clone() instead of making it a separate system call. As spotted by Linus, there is exactly one bit for clone() left. CLONE_PIDFD creates file descriptors based on the anonymous inode implementation in the kernel that will also be used to implement the new mount api. They serve as a simple opaque handle on pids. Logically, this makes it possible to interpret a pidfd differently, narrowing or widening the scope of various operations (e.g. signal sending). Thus, a pidfd cannot just refer to a tgid, but also a tid, or in theory - given appropriate flag arguments in relevant syscalls - a process group or session. A pidfd does not represent a privilege. This does not imply it cannot ever be that way but for now this is not the case. A pidfd comes with additional information in fdinfo if the kernel supports procfs. The fdinfo file contains the pid of the process in the callers pid namespace in the same format as the procfs status file, i.e. "Pid:\t%d". As suggested by Oleg, with CLONE_PIDFD the pidfd is returned in the parent_tidptr argument of clone. This has the advantage that we can give back the associated pid and the pidfd at the same time. To remove worries about missing metadata access this patchset comes with a sample program that illustrates how a combination of CLONE_PIDFD, and pidfd_send_signal() can be used to gain race-free access to process metadata through /proc/<pid>. The sample program can easily be translated into a helper that would be suitable for inclusion in libc so that users don't have to worry about writing it themselves. Suggested-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Christian Brauner <christian@brauner.io> Co-developed-by: Jann Horn <jannh@google.com> Signed-off-by: Jann Horn <jannh@google.com> Reviewed-by: Oleg Nesterov <oleg@redhat.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Kees Cook <keescook@chromium.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: David Howells <dhowells@redhat.com> Cc: "Michael Kerrisk (man-pages)" <mtk.manpages@gmail.com> Cc: Andy Lutomirsky <luto@kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Aleksa Sarai <cyphar@cyphar.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Al Viro <viro@zeniv.linux.org.uk>
2019-03-08include/linux/pid.h: remove next_pidmap() declarationNadav Amit1-1/+0
Commit 95846ecf9dac ("pid: replace pid bitmap implementation with IDR API") removed next_pidmap() but left its declaration. Remove it. No functional change. Link: http://lkml.kernel.org/r/20190213113736.21922-1-namit@vmware.com Signed-off-by: Nadav Amit <namit@vmware.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Gargi Sharma <gs051095@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-07-21pid: Implement PIDTYPE_TGIDEric W. Biederman1-2/+1
Everywhere except in the pid array we distinguish between a tasks pid and a tasks tgid (thread group id). Even in the enumeration we want that distinction sometimes so we have added __PIDTYPE_TGID. With leader_pid we almost have an implementation of PIDTYPE_TGID in struct signal_struct. Add PIDTYPE_TGID as a first class member of the pid_type enumeration and into the pids array. Then remove the __PIDTYPE_TGID special case and the leader_pid in signal_struct. The net size increase is just an extra pointer added to struct pid and an extra pair of pointers of an hlist_node added to task_struct. The effect on code maintenance is the removal of a number of special cases today and the potential to remove many more special cases as PIDTYPE_TGID gets used to it's fullest. The long term potential is allowing zombie thread group leaders to exit, which will remove a lot more special cases in the code. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2018-07-21pids: Move the pgrp and session pid pointers from task_struct to signal_structEric W. Biederman1-7/+1
To access these fields the code always has to go to group leader so going to signal struct is no loss and is actually a fundamental simplification. This saves a little bit of memory by only allocating the pid pointer array once instead of once for every thread, and even better this removes a few potential races caused by the fact that group_leader can be changed by de_thread, while signal_struct can not. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2017-11-18pid: remove pidhashGargi Sharma1-2/+0
pidhash is no longer required as all the information can be looked up from idr tree. nr_hashed represented the number of pids that had been hashed. Since, nr_hashed and PIDNS_HASH_ADDING are no longer relevant, it has been renamed to pid_allocated and PIDNS_ADDING respectively. [gs051095@gmail.com: v6] Link: http://lkml.kernel.org/r/1507760379-21662-3-git-send-email-gs051095@gmail.com Link: http://lkml.kernel.org/r/1507583624-22146-3-git-send-email-gs051095@gmail.com Signed-off-by: Gargi Sharma <gs051095@gmail.com> Reviewed-by: Rik van Riel <riel@redhat.com> Tested-by: Tony Luck <tony.luck@intel.com> [ia64] Cc: Julia Lawall <julia.lawall@lip6.fr> Cc: Ingo Molnar <mingo@kernel.org> Cc: Pavel Tatashin <pasha.tatashin@oracle.com> Cc: Kirill Tkhai <ktkhai@virtuozzo.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Eric W. Biederman <ebiederm@xmission.com> Cc: Christoph Hellwig <hch@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-11-02License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseGreg Kroah-Hartman1-0/+1
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-08-21pids: make task_tgid_nr_ns() safeOleg Nesterov1-1/+3
This was reported many times, and this was even mentioned in commit 52ee2dfdd4f5 ("pids: refactor vnr/nr_ns helpers to make them safe") but somehow nobody bothered to fix the obvious problem: task_tgid_nr_ns() is not safe because task->group_leader points to nowhere after the exiting task passes exit_notify(), rcu_read_lock() can not help. We really need to change __unhash_process() to nullify group_leader, parent, and real_parent, but this needs some cleanups. Until then we can turn task_tgid_nr_ns() into another user of __task_pid_nr_ns() and fix the problem. Reported-by: Troy Kensinger <tkensinger@google.com> Signed-off-by: Oleg Nesterov <oleg@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-03-02sched/headers: Prepare to use <linux/rcuupdate.h> instead of ↵Ingo Molnar1-1/+1
<linux/rculist.h> in <linux/sched.h> We don't actually need the full rculist.h header in sched.h anymore, we will be able to include the smaller rcupdate.h header instead. But first update code that relied on the implicit header inclusion. Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-02-28include/linux/pid.h: use for_each_thread() in do_each_pid_thread()Tetsuo Handa1-2/+2
while_each_pid_thread() is using while_each_thread(), which is unsafe under RCU lock according to commit 0c740d0afc3b ("introduce for_each_thread() to replace the buggy while_each_thread()"). Use for_each_thread() in do_each_pid_thread() which is safe under RCU lock. Link: http://lkml.kernel.org/r/201702011947.DBD56740.OMVHOLOtSJFFFQ@I-love.SAKURA.ne.jp Link: http://lkml.kernel.org/r/1486041779-4401-2-git-send-email-penguin-kernel@I-love.SAKURA.ne.jp Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Cc: Oleg Nesterov <oleg@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-04kernel/fork.c:copy_process(): don't add the uninitialized child to ↵Oleg Nesterov1-4/+2
thread/task/pid lists copy_process() adds the new child to thread_group/init_task.tasks list and then does attach_pid(child, PIDTYPE_PID). This means that the lockless next_thread() or next_task() can see this thread with the wrong pid. Say, "ls /proc/pid/task" can list the same inode twice. We could move attach_pid(child, PIDTYPE_PID) up, but in this case find_task_by_vpid() can find the new thread before it was fully initialized. And this is already true for PIDTYPE_PGID/PIDTYPE_SID, With this patch copy_process() initializes child->pids[*].pid first, then calls attach_pid() to insert the task into the pid->tasks list. attach_pid() no longer need the "struct pid*" argument, it is always called after pid_link->pid was already set. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Michal Hocko <mhocko@suse.cz> Cc: Pavel Emelyanov <xemul@parallels.com> Cc: Sergey Dyasly <dserrg@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-28hlist: drop the node parameter from iteratorsSasha Levin1-2/+1
I'm not sure why, but the hlist for each entry iterators were conceived list_for_each_entry(pos, head, member) The hlist ones were greedy and wanted an extra parameter: hlist_for_each_entry(tpos, pos, head, member) Why did they need an extra pos parameter? I'm not quite sure. Not only they don't really need it, it also prevents the iterator from looking exactly like the list iterator, which is unfortunate. Besides the semantic patch, there was some manual work required: - Fix up the actual hlist iterators in linux/list.h - Fix up the declaration of other iterators based on the hlist ones. - A very small amount of places were using the 'node' parameter, this was modified to use 'obj->member' instead. - Coccinelle didn't handle the hlist_for_each_entry_safe iterator properly, so those had to be fixed up manually. The semantic patch which is mostly the work of Peter Senna Tschudin is here: @@ iterator name hlist_for_each_entry, hlist_for_each_entry_continue, hlist_for_each_entry_from, hlist_for_each_entry_rcu, hlist_for_each_entry_rcu_bh, hlist_for_each_entry_continue_rcu_bh, for_each_busy_worker, ax25_uid_for_each, ax25_for_each, inet_bind_bucket_for_each, sctp_for_each_hentry, sk_for_each, sk_for_each_rcu, sk_for_each_from, sk_for_each_safe, sk_for_each_bound, hlist_for_each_entry_safe, hlist_for_each_entry_continue_rcu, nr_neigh_for_each, nr_neigh_for_each_safe, nr_node_for_each, nr_node_for_each_safe, for_each_gfn_indirect_valid_sp, for_each_gfn_sp, for_each_host; type T; expression a,c,d,e; identifier b; statement S; @@ -T b; <+... when != b ( hlist_for_each_entry(a, - b, c, d) S | hlist_for_each_entry_continue(a, - b, c) S | hlist_for_each_entry_from(a, - b, c) S | hlist_for_each_entry_rcu(a, - b, c, d) S | hlist_for_each_entry_rcu_bh(a, - b, c, d) S | hlist_for_each_entry_continue_rcu_bh(a, - b, c) S | for_each_busy_worker(a, c, - b, d) S | ax25_uid_for_each(a, - b, c) S | ax25_for_each(a, - b, c) S | inet_bind_bucket_for_each(a, - b, c) S | sctp_for_each_hentry(a, - b, c) S | sk_for_each(a, - b, c) S | sk_for_each_rcu(a, - b, c) S | sk_for_each_from -(a, b) +(a) S + sk_for_each_from(a) S | sk_for_each_safe(a, - b, c, d) S | sk_for_each_bound(a, - b, c) S | hlist_for_each_entry_safe(a, - b, c, d, e) S | hlist_for_each_entry_continue_rcu(a, - b, c) S | nr_neigh_for_each(a, - b, c) S | nr_neigh_for_each_safe(a, - b, c, d) S | nr_node_for_each(a, - b, c) S | nr_node_for_each_safe(a, - b, c, d) S | - for_each_gfn_sp(a, c, d, b) S + for_each_gfn_sp(a, c, d) S | - for_each_gfn_indirect_valid_sp(a, c, d, b) S + for_each_gfn_indirect_valid_sp(a, c, d) S | for_each_host(a, - b, c) S | for_each_host_safe(a, - b, c, d) S | for_each_mesh_entry(a, - b, c, d) S ) ...+> [akpm@linux-foundation.org: drop bogus change from net/ipv4/raw.c] [akpm@linux-foundation.org: drop bogus hunk from net/ipv6/raw.c] [akpm@linux-foundation.org: checkpatch fixes] [akpm@linux-foundation.org: fix warnings] [akpm@linux-foudnation.org: redo intrusive kvm changes] Tested-by: Peter Senna Tschudin <peter.senna@gmail.com> Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Signed-off-by: Sasha Levin <sasha.levin@oracle.com> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Marcelo Tosatti <mtosatti@redhat.com> Cc: Gleb Natapov <gleb@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-12-26pidns: Stop pid allocation when init diesEric W. Biederman1-0/+1
Oleg pointed out that in a pid namespace the sequence. - pid 1 becomes a zombie - setns(thepidns), fork,... - reaping pid 1. - The injected processes exiting. Can lead to processes attempting access their child reaper and instead following a stale pointer. That waitpid for init can return before all of the processes in the pid namespace have exited is also unfortunate. Avoid these problems by disabling the allocation of new pids in a pid namespace when init dies, instead of when the last process in a pid namespace is reaped. Pointed-out-by: Oleg Nesterov <oleg@redhat.com> Reviewed-by: Oleg Nesterov <oleg@redhat.com> Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2011-05-27pid: fix typo in function descriptionSisir Koppaka1-1/+1
finds is misspelt as finr. No functional change. Signed-off-by: Sisir Koppaka <sisir.koppaka@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-04-18next_pidmap: fix overflow conditionLinus Torvalds1-1/+1
next_pidmap() just quietly accepted whatever 'last' pid that was passed in, which is not all that safe when one of the users is /proc. Admittedly the proc code should do some sanity checking on the range (and that will be the next commit), but that doesn't mean that the helper functions should just do that pidmap pointer arithmetic without checking the range of its arguments. So clamp 'last' to PID_MAX_LIMIT. The fact that we then do "last+1" doesn't really matter, the for-loop does check against the end of the pidmap array properly (it's only the actual pointer arithmetic overflow case we need to worry about, and going one bit beyond isn't going to overflow). [ Use PID_MAX_LIMIT rather than pid_max as per Eric Biederman ] Reported-by: Tavis Ormandy <taviso@cmpxchg8b.com> Analyzed-by: Robert Święcki <robert@swiecki.net> Cc: Eric W. Biederman <ebiederm@xmission.com> Cc: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-03-31Fix common misspellingsLucas De Marchi1-1/+1
Fixes generated by 'codespell' and manually reviewed. Signed-off-by: Lucas De Marchi <lucas.demarchi@profusion.mobi>
2011-03-24pid: remove the child_reaper special case in init/main.cEric W. Biederman1-0/+11
This patchset is a cleanup and a preparation to unshare the pid namespace. These prerequisites prepare for Eric's patchset to give a file descriptor to a namespace and join an existing namespace. This patch: It turns out that the existing assignment in copy_process of the child_reaper can handle the initial assignment of child_reaper we just need to generalize the test in kernel/fork.c Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@free.fr> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Alexey Dobriyan <adobriyan@gmail.com> Acked-by: Serge E. Hallyn <serge@hallyn.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-08pid: implement ns_of_pidEric W. Biederman1-0/+18
A current problem with the pid namespace is that it is easy to do pid related work after exit_task_namespaces which drops the nsproxy pointer. However if we are doing pid namespace related work we are always operating on some struct pid which retains the pid_namespace pointer of the pid namespace it was allocated in. So provide ns_of_pid which allows us to find the pid namespace a pid was allocated in. Using this we have the needed infrastructure to do pid namespace related work at anytime we have a struct pid, removing the chance of accidentally having a NULL pointer dereference when accessing current->nsproxy. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Roland McGrath <roland@redhat.com> Cc: Bastian Blank <bastian@waldi.eu.org> Cc: Pavel Emelyanov <xemul@openvz.org> Cc: Nadia Derbey <Nadia.Derbey@bull.net> Acked-by: Serge Hallyn <serue@us.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-12-04pid: fix the do_each_pid_task() macroSteven Rostedt1-2/+2
Impact: macro side-effects fix This patch adds parenthesis around 'pid' in the do_each_pid_task macro to allow callers to pass in more complex parameters. e.g. do_each_pid_task(*pid, type, task) Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-08-21fix setpriority(PRIO_PGRP) thread iterator breakageKen Chen1-0/+9
When user calls sys_setpriority(PRIO_PGRP ...) on a NPTL style multi-LWP process, only the task leader of the process is affected, all other sibling LWP threads didn't receive the setting. The problem was that the iterator used in sys_setpriority() only iteartes over one task for each process, ignoring all other sibling thread. Introduce a new macro do_each_pid_thread / while_each_pid_thread to walk each thread of a process. Convert 4 call sites in {set/get}priority and ioprio_{set/get}. Signed-off-by: Ken Chen <kenchen@google.com> Cc: Oleg Nesterov <oleg@tv-sign.ru> Cc: Roland McGrath <roland@redhat.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Jens Axboe <jens.axboe@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-25pidns: remove find_task_by_pid, unused for a long timePavel Emelyanov1-1/+1
It seems to me that it was a mistake marking this function as deprecated and scheduling it for removal, rather than resolutely removing it after the last caller's death. Anyway - better late, then never. Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Cc: Oleg Nesterov <oleg@tv-sign.ru> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-25pidns: remove now unused find_pid function.Pavel Emelyanov1-3/+1
This one had the only users so far - the kill_proc, which is removed, so drop this (invalid in namespaced world) call too. And of course - erase all references on it from comments. Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Cc: Oleg Nesterov <oleg@tv-sign.ru> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-25shrink struct pid by removing padding on 64 bit buildsRichard Kennedy1-1/+1
When struct pid is built on a 64 bit platform gcc has to insert padding to maintain the correct alignment, by simply reordering its members the memory usage shrinks from 88 bytes to 80. I've successfully run with this patch on my desktop AMD64 machine. There are no significant kernel size changes to a default config.X86_64 on the latest git v2.6.26-rc1 text data bss dec hex filename 5404828 976760 734280 7115868 6c945c vmlinux 5404811 976760 734280 7115851 6c944b vmlinux.pid-patch Acked-by: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-30pidns: make pid->level and pid_ns->level unsignedPavel Emelyanov1-1/+1
These values represent the nesting level of a namespace and pids living in it, and it's always non-negative. Turning this from int to unsigned int saves some space in pid.c (11 bytes on x86 and 64 on ia64) by letting the compiler optimize the pid_nr_ns a bit. E.g. on ia64 this removes the sign extension calls, which compiler adds to optimize access to pid->nubers[ns->level]. Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-30pids: introduce change_pid() helperOleg Nesterov1-2/+4
Based on Eric W. Biederman's idea. Without tasklist_lock held task_session()/task_pgrp() can return NULL if the caller races with setprgp()/setsid() which does detach_pid() + attach_pid(). This can happen even if task == current. Intoduce the new helper, change_pid(), which should be used instead. This way the caller always sees the special pid != NULL, either old or new. Also change the prototype of attach_pid(), it always returns 0 and nobody check the returned value. Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Pavel Emelyanov <xemul@openvz.org> Cc: Roland McGrath <roland@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-14include/linux: Remove all users of FASTCALL() macroHarvey Harrison1-11/+10
FASTCALL() is always expanded to empty, remove it. [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-08uglify while_each_pid_task() to make sure we don't count the execing pricess ↵Oleg Nesterov1-0/+6
twice There is a window when de_thread() switches the leader and drops tasklist_lock. In that window do_each_pid_task(PIDTYPE_PID) finds both new and old leaders. The problem is pretty much theoretical and probably can be ignored. Currently the only users of do_each_pid_task(PIDTYPE_PID) are send_sigio/send_sigurg, so they can send the signal to the same process twice. Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Davide Libenzi <davidel@xmailserver.org> Cc: Pavel Emelyanov <xemul@openvz.org> Cc: Roland McGrath <roland@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-08pid: Extend/Fix pid_vnrEric W. Biederman1-11/+3
pid_vnr returns the user space pid with respect to the pid namespace the struct pid was allocated in. What we want before we return a pid to user space is the user space pid with respect to the pid namespace of current. pid_vnr is a very nice optimization but because it isn't quite what we want it is easy to use pid_vnr at times when we aren't certain the struct pid was allocated in our pid namespace. Currently this describes at least tiocgpgrp and tiocgsid in ttyio.c the parent process reported in the core dumps and the parent process in get_signal_to_deliver. So unless the performance impact is huge having an interface that does what we want instead of always what we want should be much more reliable and much less error prone. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Cc: Oleg Nesterov <oleg@tv-sign.ru> Acked-by: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-08namespaces: cleanup the code managed with PID_NS optionPavel Emelyanov1-1/+1
Just like with the user namespaces, move the namespace management code into the separate .c file and mark the (already existing) PID_NS option as "depend on NAMESPACES" [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Acked-by: Serge Hallyn <serue@us.ibm.com> Cc: Cedric Le Goater <clg@fr.ibm.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Herbert Poetzl <herbert@13thfloor.at> Cc: Kirill Korotaev <dev@sw.ru> Cc: Sukadev Bhattiprolu <sukadev@us.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-19Uninline find_pid etc set of functionsPavel Emelyanov1-3/+2
The find_pid/_vpid/_pid_ns functions are used to find the struct pid by its id, depending on whic id - global or virtual - is used. The find_vpid() is a macro that pushes the current->nsproxy->pid_ns on the stack to call another function - find_pid_ns(). It turned out, that this dereference together with the push itself cause the kernel text size to grow too much. Move all these out-of-line. Together with the previous patch this saves a bit less that 400 bytes from .text section. Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Cc: Sukadev Bhattiprolu <sukadev@us.ibm.com> Cc: Oleg Nesterov <oleg@tv-sign.ru> Cc: Paul Menage <menage@google.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-19pid namespaces: remove the struct pid unneeded fieldsPavel Emelyanov1-3/+0
Since we've switched from using pid->nr to pid->upids->nr some fields on struct pid are no longer needed Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Cc: Oleg Nesterov <oleg@tv-sign.ru> Cc: Sukadev Bhattiprolu <sukadev@us.ibm.com> Cc: Paul Menage <menage@google.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-19pid namespaces: destroy pid namespace on init's deathSukadev Bhattiprolu1-0/+1
Terminate all processes in a namespace when the reaper of the namespace is exiting. We do this by walking the pidmap of the namespace and sending SIGKILL to all processes. Signed-off-by: Sukadev Bhattiprolu <sukadev@us.ibm.com> Acked-by: Pavel Emelyanov <xemul@openvz.org> Cc: Oleg Nesterov <oleg@tv-sign.ru> Cc: Sukadev Bhattiprolu <sukadev@us.ibm.com> Cc: Paul Menage <menage@google.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-19pid namespaces: helpers to find the task by its numerical idsPavel Emelyanov1-2/+14
When searching the task by numerical id on may need to find it using global pid (as it is done now in kernel) or by its virtual id, e.g. when sending a signal to a task from one namespace the sender will specify the task's virtual id and we should find the task by this value. [akpm@linux-foundation.org: fix gfs2 linkage] Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Cc: Oleg Nesterov <oleg@tv-sign.ru> Cc: Sukadev Bhattiprolu <sukadev@us.ibm.com> Cc: Paul Menage <menage@google.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-19pid namespaces: helpers to obtain pid numbersPavel Emelyanov1-1/+23
When showing pid to user or getting the pid numerical id for in-kernel use the value of this id may differ depending on the namespace. This set of helpers is used to get the global pid nr, the virtual (i.e. seen by task in its namespace) nr and the nr as it is seen from the specified namespace. Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Cc: Oleg Nesterov <oleg@tv-sign.ru> Cc: Sukadev Bhattiprolu <sukadev@us.ibm.com> Cc: Paul Menage <menage@google.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-19pid namespaces: make alloc_pid(), free_pid() and put_pid() work with struct upidPavel Emelyanov1-1/+1
Each struct upid element of struct pid has to be initialized properly, i.e. its nr mst be allocated from appropriate pidmap and ns set to appropriate namespace. When allocating a new pid, we need to know the namespace this pid will live in, so the additional argument is added to alloc_pid(). On the other hand, the rest of the kernel still uses the pid->nr and pid->pid_chain fields, so these ones are still initialized, but this will be removed soon. Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Cc: Oleg Nesterov <oleg@tv-sign.ru> Cc: Sukadev Bhattiprolu <sukadev@us.ibm.com> Cc: Paul Menage <menage@google.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-19pid namespaces: introduce struct upidSukadev Bhattiprolu1-0/+16
Since task will be visible from different pid namespaces each of them have to be addressed by multiple pids. struct upid is to store the information about which id refers to which namespace. The constuciton looks like this. Each struct pid carried the reference counter and the list of tasks attached to this pid. At its end it has a variable length array of struct upid-s. Each struct upid has a numerical id (pid itself), pointer to the namespace, this ID is valid in and is hashed into a pid_hash for searching the pids. The nr and pid_chain fields are kept in struct pid for a while to make kernel still work (no patch initialize the upids yet), but it will be removed at the end of this series when we switch to upids completely. Signed-off-by: Sukadev Bhattiprolu <sukadev@us.ibm.com> Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Cc: Oleg Nesterov <oleg@tv-sign.ru> Cc: Paul Menage <menage@google.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>