summaryrefslogtreecommitdiff
path: root/include/linux/shdma-base.h
AgeCommit message (Collapse)AuthorFilesLines
2015-08-05dmaengine: shdma: Make dummy shdma_chan_filter() always return falseGeert Uytterhoeven1-1/+4
If CONFIG_SH_DMAE_BASE (which is required for DMA engine support for legacy SH, SH/R-Mobile, and R-Car Gen1, but not for R-Car Gen2) is not enabled, but CONFIG_RCAR_DMAC (for R-Car Gen2 DMA engine support) is, and the DTS doesn't provide a "dmas" property for a device, dma_request_slave_channel_compat() incorrectly succeeds, and returns a DMA channel. However, when trying to use that DMA channel later, it fails with: rcar-dmac e6700000.dma-controller: rcar_dmac_prep_slave_sg: bad parameter: len=1, id=-22 (Fortunately most drivers can handle this failure, and fall back to PIO) The reason for this is that a NULL legacy filter function is used, which actually means "all channels are OK", not "do not match". If CONFIG_SH_DMAE_BASE is enabled (like in shmobile_defconfig, which supports other SoCs besides R-Car Gen2), shdma_chan_filter() correctly returns false, as no available channel on R-Car Gen2 matches a shdma-base channel. If the DTS does provide a "dmas" property, dma_request_slave_channel() succeeds, and legacy filter-based matching is not used. To fix this, change shdma_chan_filter from being NULL to a dummy function that always returns false, like is done on other platforms. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2015-02-23dmaengine: shdma: use normal interface for passing slave idArnd Bergmann1-0/+1
in dma_slave_config, which is incompatible with the way that the dmaengine API normally works. I've had a closer look at the existing code now and found that all slave drivers that pass a slave_id in dma_slave_config for SH do that right after passing the same ID into shdma_chan_filter, so we can just rely on that. However, the various shdma drivers currently do not remember the slave ID that was passed into the filter function when used in non-DT mode and only check the value to find a matching channel, unlike all other drivers. There might still be drivers that are not part of the kernel that rely on setting the slave_id to some other value, so to be on the safe side, this adds another 'real_slave_id' field to shdma_chan that remembers the ID and uses it when a driver passes a zero slave_id in dma_slave_config, like most drivers do. Eventually, the real_slave_id and slave_id fields should just get merged into one field, but that requires other changes. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2014-05-02DMA: shdma: add cyclic transfer supportKuninori Morimoto1-0/+1
This patch add cyclic transfer support and enables dmaengine_prep_dma_cyclic() Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> [reflown changelog for readablity] Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-08-27DMA: shdma: switch DT mode to use configuration data from a match tableGuennadi Liakhovetski1-1/+1
This facilitates DMAC DT support by eliminating the need in AUXDATA and avoiding creating complex DT data. This also fits well with DMAC devices, of which SoCs often have multiple identical copies and it is perfectly valid to use a single configuration data set for all of them. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski+renesas@gmail.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-08-27DMA: shdma: switch to managed resource allocationGuennadi Liakhovetski1-1/+0
Switch shdma to using devm_* managed functions for allocation of memory, requesting IRQs, mapping IO resources etc. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski+renesas@gmail.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-07-23dmaengine: shdma: fix a build failure on platforms with no DMA supportGuennadi Liakhovetski1-0/+4
On platforms with no support for the shdma dmaengine driver build is currently failing with drivers/built-in.o: In function `sh_mobile_sdhi_probe': drivers/mmc/host/sh_mobile_sdhi.c:170: undefined reference to`shdma_chan_filter' Fix the breakage by defining shdma_chan_filter to NULL in such configurations. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski+renesas@gmail.com> [horms+renesas@verge.net.au: Apply change to shdma-base.h instead of sh_dma.h] Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Olof Johansson <olof@lixom.net>
2013-07-05DMA: shdma: add DT supportGuennadi Liakhovetski1-0/+2
This patch adds Device Tree support to the shdma driver. No special DT properties are used, only standard DMA DT bindings are implemented. Since shdma controllers reside on SoCs, their configuration is SoC-specific and shall be passed to the driver from the SoC platform data, using the auxdata procedure. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski+renesas@gmail.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-07-05DMA: shdma: shdma_chan_filter() has to be in shdma-base.hGuennadi Liakhovetski1-0/+1
shdma_chan_filter() is a function, provided by the shdma-base.c module, move its declaration to the appropriate header. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski+renesas@gmail.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2012-08-01dmaengine: shdma: restore partial transfer calculationGuennadi Liakhovetski1-0/+2
The recent shdma driver split has mistakenly removed support for partial DMA transfer size calculation on forced termination. This patch restores it. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Acked-by: Vinod Koul <vinod.koul@linux.intel.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2012-07-20dma: sh: provide a migration path for slave drivers to stop using .privateGuennadi Liakhovetski1-1/+1
This patch extends the sh dmaengine driver to support the preferred channel selection and configuration method, instead of using the "private" field from struct dma_chan. We add a standard filter function to be used by slave drivers instead of implementing their own ones, and add support for the DMA_SLAVE_CONFIG control operation, which must accompany the new channel selection method. We still support the legacy .private channel allocation method to cater for a smooth driver migration. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> [applied a trvial checkpath fix] Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2012-07-20dma: sh: use an integer slave ID to improve API compatibilityGuennadi Liakhovetski1-4/+4
Initially struct shdma_slave has been introduced with the only member - an unsigned slave ID - to describe common properties of DMA slaves in an extensible way. However, experience shows, that a slave ID is indeed the only parameter, needed to identify DMA slaves. This is also, what is used by the core dmaengine API in struct dma_slave_config. We switch to using the slave_id directly, instead of passing a pointer to struct shdma_slave to improve compatibility with the core. We also make the slave_id signed for easier error checking. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2012-07-20dmaengine: shdma: prepare to stop using struct dma_chan::privateGuennadi Liakhovetski1-0/+1
Using struct dma_chan::private is deprecated. To update the shdma driver to stop using it we first have to eliminate internal runtime uses of it. After that we will also be able to stop using it for channel configuration. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2012-07-13dmaengine: add an shdma-base libraryGuennadi Liakhovetski1-0/+123
This patch extracts code from shdma.c, that does not directly deal with hardware implementation details and can be re-used with diverse DMA controller variants, found on SH-based SoCs. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Cc: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>