summaryrefslogtreecommitdiff
path: root/include/linux/vga_switcheroo.h
AgeCommit message (Collapse)AuthorFilesLines
2016-05-31vga_switcheroo: Add helper for deferred probingLukas Wunner1-0/+2
So far we've got one condition when DRM drivers need to defer probing on a dual GPU system and it's coded separately into each of the relevant drivers. As suggested by Daniel Vetter, deduplicate that code in the drivers and move it to a new vga_switcheroo helper. This yields better encapsulation of concepts and lets us add further checks in a central place. (The existing check pertains to pre-retina MacBook Pros and an additional check is expected to be needed for retinas.) One might be tempted to check deferred probing conditions in vga_switcheroo_register_client(), but this is usually called fairly late during driver load. The GPU is fully brought up and ready for switching at that point. On boot the ->probe hook is potentially called dozens of times until it finally succeeds, and each time we'd repeat bringup and teardown of the GPU, lengthening boot time considerably and cluttering logfiles. A separate helper is therefore needed which can be called right at the beginning of the ->probe hook. Note that amdgpu currently does not call this helper as the AMD GPUs built into MacBook Pros are only supported by radeon so far. v2: This helper could eventually be used by audio clients as well, so rephrase kerneldoc to refer to "client" instead of "GPU" and move the single existing check in an if block specific to PCI_CLASS_DISPLAY_VGA devices. Move documentation on that check from kerneldoc to a comment. (Daniel Vetter) v3: Mandate in kerneldoc that registration of client shall only happen after calling this helper. (Daniel Vetter) v4: Rebase on 412c8f7de011 ("drm/radeon: Return -EPROBE_DEFER when amdkfd not loaded") v5: Some Optimus GPUs use PCI_CLASS_DISPLAY_3D, make sure those are matched as well. (Emil Velikov) v6: The if-condition referring to PCI_BASE_CLASS_DISPLAY may be considered a functional change. Move to a separate commit to keep this a pure refactoring change. (Emil Velikov, Jani Nikula) Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Ben Skeggs <bskeggs@redhat.com> Cc: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Lukas Wunner <lukas@wunner.de> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/575885fd440c2b13c3f19ddf44360cfbbff35f50.1464685538.git.lukas@wunner.de
2016-02-09vga_switcheroo: Add support for switching only the DDCLukas Wunner1-0/+8
Originally by Seth Forshee <seth.forshee@canonical.com>, 2012-10-04: During graphics driver initialization it's useful to be able to mux only the DDC to the inactive client in order to read the EDID. Add a switch_ddc callback to allow capable handlers to provide this functionality, and add vga_switcheroo_switch_ddc() to allow DRM to mux only the DDC. Modified by Dave Airlie <airlied@gmail.com>, 2012-12-22: I can't figure out why I didn't like this, but I rewrote this [...] to lock/unlock the ddc lines [...]. I think I'd prefer something like that otherwise the interface got really ugly. Modified by Lukas Wunner <lukas@wunner.de>, 2015-04 - 2015-10: Change semantics of ->switch_ddc handler callback to return previous DDC owner. Original version tried to determine previous DDC owner with find_active_client() but this fails if the inactive client registers before the active client. Don't lock vgasr_mutex in _lock_ddc() / _unlock_ddc(), it can cause deadlocks because (a) during switch (with vgasr_mutex already held), GPU is woken and probes its outputs, tries to re-acquire vgasr_mutex to lock DDC lines; (b) Likewise during switch, GPU is suspended and calls cancel_delayed_work_sync() to stop output polling, if poll task is running at this moment we may wait forever for it to finish. Instead, lock mux_hw_lock when unregistering the handler because the only reason why we'd want to lock vgasr_mutex in _lock_ddc() / _unlock_ddc() is to block the handler from disappearing while DDC lines are switched. Also acquire mux_hw_lock in stage2 to avoid race condition where reading the EDID and switching happens simultaneously. Likewise on MIGD / MDIS commands and on runtime suspend. v2.1: Overhaul locking, squash commits (Daniel Vetter) v2.2: Readability improvements (Thierry Reding) v2.3: Overhaul locking once more v2.4: Retain semantics of ->switchto handler callback to switch all pins, including DDC (Daniel Vetter) v5: Rename ddc_lock to mux_hw_lock: Since we acquire this both when calling ->switch_ddc and ->switchto, it protects not just access to the DDC lines but to the mux in general. This is in line with the DRM convention to use low-level locks to avoid concurrent hw access (e.g. i2c, dp_aux) which are often called hw_lock (Daniel Vetter) Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=88861 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=61115 Tested-by: Lukas Wunner <lukas@wunner.de> [MBP 9,1 2012 intel IVB + nvidia GK107 pre-retina 15"] Cc: Seth Forshee <seth.forshee@canonical.com> Cc: Dave Airlie <airlied@gmail.com> Signed-off-by: Lukas Wunner <lukas@wunner.de> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/e81ae9722b84c5ed591805fee3ea6dbf5dc6c4b3.1452525860.git.lukas@wunner.de
2016-02-09vga_switcheroo: Add handler flags infrastructureLukas Wunner1-2/+26
Allow handlers to declare their capabilities and allow clients to obtain that information. So far we have these use cases: * If the handler is able to switch DDC separately, clients need to probe EDID with drm_get_edid_switcheroo(). We should allow them to detect a capable handler to ensure this function only gets called when needed. * Likewise if the handler is unable to switch AUX separately, the active client needs to communicate link training parameters to the inactive client, which may then skip the AUX handshake and set up its output with these pre-calibrated values (DisplayPort specification v1.1a, section 2.5.3.3). Clients need a way to recognize such a situation. The flags for the radeon_atpx_handler and amdgpu_atpx_handler are initially set to 0, this can later on be amended with handler_flags |= VGA_SWITCHEROO_CAN_SWITCH_DDC; when a ->switch_ddc callback is added. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=88861 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=61115 Tested-by: Lukas Wunner <lukas@wunner.de> [MBP 9,1 2012 intel IVB + nvidia GK107 pre-retina 15"] Signed-off-by: Lukas Wunner <lukas@wunner.de> Reviewed-by: Darren Hart <dvhart@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/2b0d93ed6e511ca09e95e45e0b35627f330fabce.1452525860.git.lukas@wunner.de
2015-11-05vga_switcheroo: Drop client power state VGA_SWITCHEROO_INITLukas Wunner1-5/+0
hda_intel.c:azx_probe() defers initialization of an audio controller on the discrete GPU if the GPU is powered off. The power state of the GPU is determined by calling vga_switcheroo_get_client_state(). vga_switcheroo_get_client_state() returns VGA_SWITCHEROO_INIT if vga_switcheroo is not enabled, i.e. if no second GPU or no handler has registered. This can go wrong in the following scenario: - Driver for the integrated GPU is not loaded. - Driver for the discrete GPU registers with vga_switcheroo, uses driver power control to power down the GPU, handler cuts power to the GPU. - Driver for the audio controller gets loaded after the GPU was powered down, calls vga_switcheroo_get_client_state() which returns VGA_SWITCHEROO_INIT instead of VGA_SWITCHEROO_OFF. - Consequence: azx_probe() tries to initialize the audio controller even though the GPU is powered down. The power state VGA_SWITCHEROO_INIT was introduced by c8e9cf7bb240 ("vga_switcheroo: Add a helper function to get the client state"). It is not apparent what its benefit might be. The idea seems to be to initialize the audio controller even if the power state is VGA_SWITCHEROO_OFF (were vga_switcheroo enabled), but as shown above this can fail. Drop VGA_SWITCHEROO_INIT to solve this. Acked-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Lukas Wunner <lukas@wunner.de> Signed-off-by: Dave Airlie <airlied@redhat.com>
2015-10-20vga_switcheroo: Constify vga_switcheroo_handlerLukas Wunner1-2/+2
vga_switcheroo_client_ops has always been declared const since its introduction with 26ec685ff9d9 ("vga_switcheroo: Introduce struct vga_switcheroo_client_ops"). Do so for vga_switcheroo_handler as well. drivers/gpu/drm/amd/amdgpu/amdgpu.ko: 6 .rodata 00009888 - 19 .data 00001f00 + 19 .data 00001ee0 drivers/gpu/drm/nouveau/nouveau.ko: 6 .rodata 000460b8 17 .data 00018fe0 drivers/gpu/drm/radeon/radeon.ko: - 7 .rodata 00030944 + 7 .rodata 00030964 - 21 .data 0000d6a0 + 21 .data 0000d678 drivers/platform/x86/apple-gmux.ko: - 7 .rodata 00000140 + 7 .rodata 00000160 - 11 .data 000000e0 + 11 .data 000000b8 Cc: Ben Skeggs <bskeggs@redhat.com> Cc: Darren Hart <dvhart@linux.intel.com> Cc: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Lukas Wunner <lukas@wunner.de> Reviewed-by: Christian König <christian.koenig@amd.com>. Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-10-16vga_switcheroo: Use enum vga_switcheroo_client_id instead of intLukas Wunner1-3/+3
Signed-off-by: Lukas Wunner <lukas@wunner.de> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-10-16vga_switcheroo: Use VGA_SWITCHEROO_UNKNOWN_ID instead of -1Lukas Wunner1-0/+4
Signed-off-by: Lukas Wunner <lukas@wunner.de> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-10-16vga_switcheroo: Use enum vga_switcheroo_state instead of intLukas Wunner1-2/+2
Signed-off-by: Lukas Wunner <lukas@wunner.de> Reviewed-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-09-24vga_switcheroo: Set active attribute to false for audio clientsLukas Wunner1-2/+2
The active attribute in struct vga_switcheroo_client denotes whether the outputs are currently switched to this client. The attribute is only meaningful for vga clients. It is never used for audio clients. The function vga_switcheroo_register_audio_client() misuses this attribute to store whether the audio device is fully initialized. Most likely there was a misunderstanding about the meaning of "active" when this was added. Comment from Takashi's review: "Not really. The full initialization of audio was meant that the audio is active indeed. Admittedly, though, the active flag for each audio client doesn't play any role because the audio always follows the gfx state changes, and the value passed there doesn't reflect the actual state due to the later change. So, I agree with the removal of the flag itself -- or let the audio active flag following the corresponding gfx flag. The latter will make the proc output more consistent while the former is certainly more reduction of code." Set the active attribute to false for audio clients. Remove the active parameter from vga_switcheroo_register_audio_client() and its sole caller, hda_intel.c:register_vga_switcheroo(). vga_switcheroo_register_audio_client() was introduced by 3e9e63dbd374 ("vga_switcheroo: Add the support for audio clients"). Its use in hda_intel.c was introduced by a82d51ed24bb ("ALSA: hda - Support VGA-switcheroo"). v1.1: The changes above imply that in find_active_client() the call to client_is_vga() is now superfluous. Drop it. Cc: Takashi Iwai <tiwai@suse.de> Signed-off-by: Lukas Wunner <lukas@wunner.de> [danvet: Add Takashi's clarification to the commit message.] Reviewed-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-09-22vga_switcheroo: Document _ALL_ the things!Lukas Wunner1-3/+82
This adds an "Overview" DOC section plus two DOC sections for the modes of use ("Manual switching and manual power control" and "Driver power control"). Also included is kernel-doc for all public functions, structs and enums. Signed-off-by: Lukas Wunner <lukas@wunner.de> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-09-19vgaswitcheroo: add vga_switcheroo_fini_domain_pm_opsAlex Deucher1-0/+2
Drivers should call this on unload to unregister pmops. Bug: https://bugzilla.kernel.org/show_bug.cgi?id=84431 Reviewed-by: Ben Skeggs <bskeggs@redhat.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Signed-off-by: Pali Rohár <pali.rohar@gmail.com> Cc: Ben Skeggs <bskeggs@redhat.com>
2013-08-29gpu/vga_switcheroo: add driver control power feature. (v3)Dave Airlie1-2/+11
For optimus and powerxpress muxless we really want the GPU driver deciding when to power up/down the GPU, not userspace. This adds the ability for a driver to dynamically power up/down the GPU and remove the switcheroo from controlling it, the switcheroo reports the dynamic state to userspace also. It also adds 2 power domains, one for machine where the power switch is controlled outside the GPU D3 state, so the powerdown ordering is done correctly, and the second for the hdmi audio device to make sure it can resume for PCI config space accesses. v1.1: fix build with switcheroo off v2: add power domain support for radeon and v1 nvidia dsms v2.1: fix typo in off case v3: add audio power domain for hdmi audio + misc audio fixes v4: use PCI_SLOT macro, drop power reference on hdmi audio resume failure also. Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-06-21vga_switcheroo: Add include guardOzan Çağlayan1-0/+4
Guard vga_switcheroo.h against multiple inclusion. Signed-off-by: Ozan Çağlayan <ozancag@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-06-16vga_switcheroo.h: fix pci_dev warningRandy Dunlap1-0/+2
Fix warnings on some architectures/configs (not on x86): include/linux/vga_switcheroo.h:28:30: warning: 'struct pci_dev' declared inside parameter list [enabled by default] include/linux/vga_switcheroo.h:28:30: warning: its scope is only this definition or declaration, which is probably not what you want [enabled by default] Signed-off-by: Randy Dunlap <rdunlap@xenotime.net> Cc: Takashi Iwai <tiwai@suse.de> Reported-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-06-08vga_switcheroo: Fix error without CONFIG_VGA_SWITCHEROOTakashi Iwai1-1/+1
Fix a typo that is built only when CONFIG_VGA_SWITCHEROO=n. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-06-08vga_switcheroo: Add a helper function to get the client stateTakashi Iwai1-0/+7
Add vga_switcheroo_get_client_state() to get the current state of the client. This is necessary to determine the proper initial state of audio clients in HD-audio driver. Acked-by: Dave Airlie <airlied@redhat.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-05-13vga_switcheroo: Add the support for audio clientsTakashi Iwai1-0/+6
Add the support for audio clients to VGA-switcheroo for handling the HDMI audio controller together with VGA switching. The id of the audio controller should be given explicitly at registration time unlike the video controller. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=43155 Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-05-13vga_switcheroo: Introduce struct vga_switcheroo_client_opsTakashi Iwai1-6/+7
This changes the API as a clean-up. Instead of passing multiple function pointers at each time, introduce a new struct holding the whole callback functions and pass it to the registration. The same struct will be used for the upcoming audio client registration, too. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-01-06vga_switcheroo: fix build with non switcheroo enabled path.Dave Airlie1-0/+1
Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-01-05vga_switcheroo: add reprobe hook for fbcon to recheck connected outputs.Dave Airlie1-0/+1
This adds a hook after the mux is switched for the driver to reprobe the connected outputs. Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-03-01vga_switcheroo: fix build on platforms with no ACPIDave Airlie1-1/+0
radeon was always including the atpx code unnecessarily, also core switcheroo was including acpi headers. Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-03-01vga_switcheroo: initial implementation (v15)Dave Airlie1-0/+58
Many new laptops now come with 2 gpus, one to be used for low power modes and one for gaming/on-ac applications. These GPUs are typically wired to the laptop panel and VGA ports via a multiplexer unit which is controlled via ACPI methods. 4 combinations of systems typically exist - with 2 ACPI methods. Intel/ATI - Lenovo W500/T500 - use ATPX ACPI method ATI/ATI - some ASUS - use ATPX ACPI Method Intel/Nvidia - - use _DSM ACPI method Nvidia/Nvidia - - use _DSM ACPI method. TODO: This patch adds support for the ATPX method and initial bits for the _DSM methods that need to written by someone with access to the hardware. Add a proper non-debugfs interface - need to get some proper testing first. v2: add power up/down support for both devices on W500 puts i915/radeon into D3 and cuts power to radeon. v3: redo probing methods, no DMI list, drm devices call to register with switcheroo, it tries to find an ATPX method on any device and once there is two devices + ATPX it inits the switcher. v4: ATPX msg handling using buffers - should work on more machines v5: rearchitect after more mjg59 discussion - move ATPX handling to radeon driver. v6: add file headers + initial nouveau bits (to be filled out). v7: merge delayed switcher code. v8: avoid suspend/resume of gpu that is off v9: rearchitect - mjg59 is always right. - move all ATPX code to radeon, should allow simpler DSM also proper ATRM handling v10: add ATRM support for radeon BIOS, add mutex to lock vgasr_priv v11: fix bug in resuming Intel for 2nd time. v12: start fixing up nvidia code blindly. v13: blindly guess at finishing nvidia code v14: remove radeon audio hacks - fix up intel resume more like upstream v15: clean up printks + remove unnecessary igd/dis pointers mount debugfs /sys/kernel/debug/vgaswitcheroo/switch - should exist if ATPX detected + 2 cards. DIS - immediate change to discrete IGD - immediate change to IGD DDIS - delayed change to discrete DIGD - delayed change to IGD ON - turn on not in use OFF - turn off not in use Tested on W500 (Intel/ATI) and T500 (Intel/ATI) Signed-off-by: Dave Airlie <airlied@redhat.com>