summaryrefslogtreecommitdiff
path: root/include/linux/wait.h
AgeCommit message (Collapse)AuthorFilesLines
2017-11-02License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseGreg Kroah-Hartman1-0/+1
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-09-14sched/wait: Introduce wakeup boomark in wake_up_page_bitTim Chen1-0/+2
Now that we have added breaks in the wait queue scan and allow bookmark on scan position, we put this logic in the wake_up_page_bit function. We can have very long page wait list in large system where multiple pages share the same wait list. We break the wake up walk here to allow other cpus a chance to access the list, and not to disable the interrupts when traversing the list for too long. This reduces the interrupt and rescheduling latency, and excessive page wait queue lock hold time. [ v2: Remove bookmark_wake_function ] Signed-off-by: Tim Chen <tim.c.chen@linux.intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-09-14sched/wait: Break up long wake list walkTim Chen1-0/+1
We encountered workloads that have very long wake up list on large systems. A waker takes a long time to traverse the entire wake list and execute all the wake functions. We saw page wait list that are up to 3700+ entries long in tests of large 4 and 8 socket systems. It took 0.8 sec to traverse such list during wake up. Any other CPU that contends for the list spin lock will spin for a long time. It is a result of the numa balancing migration of hot pages that are shared by many threads. Multiple CPUs waking are queued up behind the lock, and the last one queued has to wait until all CPUs did all the wakeups. The page wait list is traversed with interrupt disabled, which caused various problems. This was the original cause that triggered the NMI watch dog timer in: https://patchwork.kernel.org/patch/9800303/ . Only extending the NMI watch dog timer there helped. This patch bookmarks the waker's scan position in wake list and break the wake up walk, to allow access to the list before the waker resume its walk down the rest of the wait list. It lowers the interrupt and rescheduling latency. This patch also provides a performance boost when combined with the next patch to break up page wakeup list walk. We saw 22% improvement in the will-it-scale file pread2 test on a Xeon Phi system running 256 threads. [ v2: Merged in Linus' changes to remove the bookmark_wake_function, and simply access to flags. ] Reported-by: Kan Liang <kan.liang@intel.com> Tested-by: Kan Liang <kan.liang@intel.com> Signed-off-by: Tim Chen <tim.c.chen@linux.intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-08-19wait: add wait_event_killable_timeout()Luis R. Rodriguez1-0/+37
These are the few pending fixes I have queued up for v4.13-final. One is a a generic regression fix for recursive loops on kmod and the other one is a trivial print out correction. During the v4.13 development we assumed that recursive kmod loops were no longer possible. Clearly that is not true. The regression fix makes use of a new killable wait. We use a killable wait to be paranoid in how signals might be sent to modprobe and only accept a proper SIGKILL. The signal will only be available to userspace to issue *iff* a thread has already entered a wait state, and that happens only if we've already throttled after 50 kmod threads have been hit. Note that although it may seem excessive to trigger a failure afer 5 seconds if all kmod thread remain busy, prior to the series of changes that went into v4.13 we would actually *always* fatally fail any request which came in if the limit was already reached. The new waiting implemented in v4.13 actually gives us *more* breathing room -- the wait for 5 seconds is a wait for *any* kmod thread to finish. We give up and fail *iff* no kmod thread has finished and they're *all* running straight for 5 consecutive seconds. If 50 kmod threads are running consecutively for 5 seconds something else must be really bad. Recursive loops with kmod are bad but they're also hard to implement properly as a selftest without currently fooling current userspace tools like kmod [1]. For instance kmod will complain when you run depmod if it finds a recursive loop with symbol dependency between modules as such this type of recursive loop cannot go upstream as the modules_install target will fail after running depmod. These tests already exist on userspace kmod upstream though (refer to the testsuite/module-playground/mod-loop-*.c files). The same is not true if request_module() is used though, or worst if aliases are used. Likewise the issue with 64-bit kernels booting 32-bit userspace without a binfmt handler built-in is also currently not detected and proactively avoided by userspace kmod tools, or kconfig for all architectures. Although we could complain in the kernel when some of these individual recursive issues creep up, proactively avoiding these situations in userspace at build time is what we should keep striving for. Lastly, since recursive loops could happen with kmod it may mean recursive loops may also be possible with other kernel usermode helpers, this should be investigated and long term if we can come up with a more sensible generic solution even better! [0] https://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux.git/log/?h=20170809-kmod-for-v4.13-final [1] https://git.kernel.org/pub/scm/utils/kernel/kmod/kmod.git This patch (of 3): This wait is similar to wait_event_interruptible_timeout() but only accepts SIGKILL interrupt signal. Other signals are ignored. Link: http://lkml.kernel.org/r/20170809234635.13443-2-mcgrof@kernel.org Signed-off-by: Luis R. Rodriguez <mcgrof@kernel.org> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Kees Cook <keescook@chromium.org> Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com> Cc: Jessica Yu <jeyu@redhat.com> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Michal Marek <mmarek@suse.com> Cc: Petr Mladek <pmladek@suse.com> Cc: Miroslav Benes <mbenes@suse.cz> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Shuah Khan <shuah@kernel.org> Cc: Matt Redfearn <matt.redfearn@imgtec.com> Cc: Dan Carpenter <dan.carpenter@oracle.com> Cc: Colin Ian King <colin.king@canonical.com> Cc: Daniel Mentz <danielmentz@google.com> Cc: David Binderman <dcb314@hotmail.com> Cc: Matt Redfearn <matt.redfearn@imgetc.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-07-25sched/wait: Clean up some documentation warningsJonathan Corbet1-4/+4
A couple of kerneldoc comments in <linux/wait.h> had incorrect names for macro parameters, with this unsightly result: ./include/linux/wait.h:555: warning: No description found for parameter 'wq' ./include/linux/wait.h:555: warning: Excess function parameter 'wq_head' description in 'wait_event_interruptible_hrtimeout' ./include/linux/wait.h:759: warning: No description found for parameter 'wq_head' ./include/linux/wait.h:759: warning: Excess function parameter 'wq' description in 'wait_event_killable' Correct the comments and kill the warnings. Signed-off-by: Jonathan Corbet <corbet@lwn.net> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-doc@vger.kernel.org Link: http://lkml.kernel.org/r/20170724135800.769c4042@lwn.net Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-06-20sched/wait: Disambiguate wq_entry->task_list and wq_head->task_list namingIngo Molnar1-10/+10
So I've noticed a number of instances where it was not obvious from the code whether ->task_list was for a wait-queue head or a wait-queue entry. Furthermore, there's a number of wait-queue users where the lists are not for 'tasks' but other entities (poll tables, etc.), in which case the 'task_list' name is actively confusing. To clear this all up, name the wait-queue head and entry list structure fields unambiguously: struct wait_queue_head::task_list => ::head struct wait_queue_entry::task_list => ::entry For example, this code: rqw->wait.task_list.next != &wait->task_list ... is was pretty unclear (to me) what it's doing, while now it's written this way: rqw->wait.head.next != &wait->entry ... which makes it pretty clear that we are iterating a list until we see the head. Other examples are: list_for_each_entry_safe(pos, next, &x->task_list, task_list) { list_for_each_entry(wq, &fence->wait.task_list, task_list) { ... where it's unclear (to me) what we are iterating, and during review it's hard to tell whether it's trying to walk a wait-queue entry (which would be a bug), while now it's written as: list_for_each_entry_safe(pos, next, &x->head, entry) { list_for_each_entry(wq, &fence->wait.head, entry) { Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-06-20sched/wait: Split out the wait_bit*() APIs from <linux/wait.h> into ↵Ingo Molnar1-250/+0
<linux/wait_bit.h> The wait_bit*() types and APIs are mixed into wait.h, but they are a pretty orthogonal extension of wait-queues. Furthermore, only about 50 kernel files use these APIs, while over 1000 use the regular wait-queue functionality. So clean up the main wait.h by moving the wait-bit functionality out of it, into a separate .h and .c file: include/linux/wait_bit.h for types and APIs kernel/sched/wait_bit.c for the implementation Update all header dependencies. This reduces the size of wait.h rather significantly, by about 30%. Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-06-20sched/wait: Re-adjust macro line continuation backslashes in <linux/wait.h>Ingo Molnar1-323/+322
So there's over 300 CPP macro line-continuation backslashes in include/linux/wait.h (!!), which are aligned vertically to make the macro maze a bit more navigable. The recent renames and reorganization broke some of them, and instead of re-aligning them in every patch (which would add a lot of stylistic noise to the patches and make them less readable), I just ignored them - and fixed them up in a single go in this patch. Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-06-20sched/wait: Improve the bit-wait API parameter names in the API function ↵Ingo Molnar1-15/+15
prototypes Contrary to kernel tradition, most of the bit-wait function prototypes in <linux/wait.h> don't fully define the parameter names, they only list the types: int out_of_line_wait_on_bit_timeout(void *, int, wait_bit_action_f *, unsigned, unsigned long); ... which is pretty passive-aggressive in terms of informing the reader about what these functions are doing. Fill in the parameter names, such as: int out_of_line_wait_on_bit_timeout(void *word, int, wait_bit_action_f *action, unsigned int mode, unsigned long timeout); Also turn spurious (and inconsistently utilized) cases of 'unsigned' into 'unsigned int'. Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-06-20sched/wait: Standardize wait_bit_queue namingIngo Molnar1-4/+4
So wait-bit-queue head variables are often named: struct wait_bit_queue *q ... which is a bit ambiguous and super confusing, because they clearly suggest wait-queue head semantics and behavior (they rhyme with the old wait_queue_t *q naming), while they are extended wait-queue _entries_, not heads! They are misnomers in two ways: - the 'wait_bit_queue' leaves open the question of whether it's an entry or a head - the 'q' parameter and local variable naming falsely implies that it's a 'queue' - while it's an entry. This resulted in sometimes confusing cases such as: finish_wait(wq, &q->wait); where the 'q' is not a wait-queue head, but a wait-bit-queue entry. So improve this all by standardizing wait-bit-queue nomenclature similar to wait-queue head naming: struct wait_bit_queue => struct wait_bit_queue_entry q => wbq_entry Which makes it all a much clearer: struct wait_bit_queue_entry *wbq_entry ... and turns the former confusing piece of code into: finish_wait(wq_head, &wbq_entry->wq_entry; which IMHO makes it apparently clear what we are doing, without having to analyze the context of the code: we are adding a wait-queue entry to a regular wait-queue head, which entry is embedded in a wait-bit-queue entry. I'm not a big fan of acronyms, but repeating wait_bit_queue_entry in field and local variable names is too long, so Hopefully it's clear enough that 'wq_' prefixes stand for wait-queues, while 'wbq_' prefixes stand for wait-bit-queues. Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-06-20sched/wait: Standardize 'struct wait_bit_queue' wait-queue entry field nameIngo Molnar1-3/+3
Rename 'struct wait_bit_queue::wait' to ::wq_entry, to more clearly name it as a wait-queue entry. Propagate it to a couple of usage sites where the wait-bit-queue internals are exposed. Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-06-20sched/wait: Standardize internal naming of wait-queue headsIngo Molnar1-38/+38
The wait-queue head parameters and variables are named in a couple of ways, we have the following variants currently: wait_queue_head_t *q wait_queue_head_t *wq wait_queue_head_t *head In particular the 'wq' naming is ambiguous in the sense whether it's a wait-queue head or entry name - as entries were often named 'wait'. ( Not to mention the confusion of any readers coming over from workqueue-land. ) Standardize all this around a single, unambiguous parameter and variable name: struct wait_queue_head *wq_head which is easy to grep for and also rhymes nicely with the wait-queue entry naming: struct wait_queue_entry *wq_entry Also rename: struct __wait_queue_head => struct wait_queue_head ... and use this struct type to migrate from typedefs usage to 'struct' usage, which is more in line with existing kernel practices. Don't touch any external users and preserve the main wait_queue_head_t typedef. Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-06-20sched/wait: Standardize internal naming of wait-queue entriesIngo Molnar1-42/+42
So the various wait-queue entry variables in include/linux/wait.h and kernel/sched/wait.c are named in a colorfully inconsistent way: wait_queue_entry_t *wait wait_queue_entry_t *__wait (even in plain C code!) wait_queue_entry_t *q (!) wait_queue_entry_t *new (making anyone who knows C++ cringe) wait_queue_entry_t *old I think part of the reason for the inconsistency is the constant apparent confusion about what a wait queue 'head' versus 'entry' is. ( Some of the documentation talks about a 'wait descriptor', which is the wait-queue entry itself - further adding to the confusion. ) The most common name is 'wait', but that in itself is somewhat ambiguous as well, as it does not really make it clear whether it's a wait-queue entry or head. To improve all this name the wait-queue entry structure parameters and variables consistently and push through this naming into all the wait.h and wait.c code: struct wait_queue_entry *wq_entry The 'wq_' prefix makes it easy to grep for, and we also use the opportunity to move away from the typedef to a plain 'struct' naming: in the kernel we typically reserve typedefs for cases where a C structure is really small and somewhat opaque - such as pte_t. wait-queue entries are neither small nor opaque, so use the more standard 'struct xxx_entry' list management code nomenclature instead. ( We don't touch external users, and we preserve the typedef as well for actual wait-queue users, to reduce unnecessary churn. ) Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-06-20sched/wait: Rename wait_queue_t => wait_queue_entry_tIngo Molnar1-32/+35
Rename: wait_queue_t => wait_queue_entry_t 'wait_queue_t' was always a slight misnomer: its name implies that it's a "queue", but in reality it's a queue *entry*. The 'real' queue is the wait queue head, which had to carry the name. Start sorting this out by renaming it to 'wait_queue_entry_t'. This also allows the real structure name 'struct __wait_queue' to lose its double underscore and become 'struct wait_queue_entry', which is the more canonical nomenclature for such data types. Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-03-08sched/headers: fix up header file dependency on <linux/sched/signal.h>Linus Torvalds1-21/+10
The scheduler header file split and cleanups ended up exposing a few nasty header file dependencies, and in particular it showed how we in <linux/wait.h> ended up depending on "signal_pending()", which now comes from <linux/sched/signal.h>. That's a very subtle and annoying dependency, which already caused a semantic merge conflict (see commit e58bc927835a "Pull overlayfs updates from Miklos Szeredi", which added that fixup in the merge commit). It turns out that we can avoid this dependency _and_ improve code generation by moving the guts of the fairly nasty helper #define __wait_event_interruptible_locked() to out-of-line code. The code that includes the signal_pending() check is all in the slow-path where we actually go to sleep waiting for the event anyway, so using a helper function is the right thing to do. Using a helper function is also what we already did for the non-locked versions, see the "__wait_event*()" macros and the "prepare_to_wait*()" set of helper functions. We might want to try to unify all these macro games, we have a _lot_ of subtly different wait-event loops. But this is the minimal patch to fix the annoying header dependency. Acked-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-03-02sched/headers: Prepare to remove <linux/cred.h> inclusion from <linux/sched.h>Ingo Molnar1-0/+1
Add #include <linux/cred.h> dependencies to all .c files rely on sched.h doing that for them. Note that even if the count where we need to add extra headers seems high, it's still a net win, because <linux/sched.h> is included in over 2,200 files ... Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-12-25ktime: Get rid of the unionThomas Gleixner1-1/+1
ktime is a union because the initial implementation stored the time in scalar nanoseconds on 64 bit machine and in a endianess optimized timespec variant for 32bit machines. The Y2038 cleanup removed the timespec variant and switched everything to scalar nanoseconds. The union remained, but become completely pointless. Get rid of the union and just keep ktime_t as simple typedef of type s64. The conversion was done with coccinelle and some manual mopping up. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org>
2016-09-30sched/wait: Introduce init_wait_entry()Oleg Nesterov1-6/+3
The partial initialization of wait_queue_t in prepare_to_wait_event() looks ugly. This was done to shrink .text, but we can simply add the new helper which does the full initialization and shrink the compiled code a bit more. And. This way prepare_to_wait_event() can have more users. In particular we are ready to remove the signal_pending_state() checks from wait_bit_action_f helpers and change __wait_on_bit_lock() to use prepare_to_wait_event(). Signed-off-by: Oleg Nesterov <oleg@redhat.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Al Viro <viro@ZenIV.linux.org.uk> Cc: Bart Van Assche <bvanassche@acm.org> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Neil Brown <neilb@suse.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/20160906140055.GA6167@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-09-30sched/wait: Avoid abort_exclusive_wait() in __wait_on_bit_lock()Oleg Nesterov1-1/+0
__wait_on_bit_lock() doesn't need abort_exclusive_wait() too. Right now it can't use prepare_to_wait_event() (see the next change), but it can do the additional finish_wait() if action() fails. abort_exclusive_wait() no longer has callers, remove it. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Al Viro <viro@ZenIV.linux.org.uk> Cc: Bart Van Assche <bvanassche@acm.org> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Neil Brown <neilb@suse.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/20160906140053.GA6164@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-09-30sched/wait: Avoid abort_exclusive_wait() in ___wait_event()Oleg Nesterov1-6/+1
___wait_event() doesn't really need abort_exclusive_wait(), we can simply change prepare_to_wait_event() to remove the waiter from q->task_list if it was interrupted. This simplifies the code/logic, and this way prepare_to_wait_event() can have more users, see the next change. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Al Viro <viro@ZenIV.linux.org.uk> Cc: Bart Van Assche <bvanassche@acm.org> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Neil Brown <neilb@suse.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/20160908164815.GA18801@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org> -- include/linux/wait.h | 7 +------ kernel/sched/wait.c | 35 +++++++++++++++++++++++++---------- 2 files changed, 26 insertions(+), 16 deletions(-)
2016-09-30sched/wait: Fix abort_exclusive_wait(), it should pass TASK_NORMAL to wake_up()Oleg Nesterov1-3/+3
Otherwise this logic only works if mode is "compatible" with another exclusive waiter. If some wq has both TASK_INTERRUPTIBLE and TASK_UNINTERRUPTIBLE waiters, abort_exclusive_wait() won't wait an uninterruptible waiter. The main user is __wait_on_bit_lock() and currently it is fine but only because TASK_KILLABLE includes TASK_UNINTERRUPTIBLE and we do not have lock_page_interruptible() yet. Just use TASK_NORMAL and remove the "mode" arg from abort_exclusive_wait(). Yes, this means that (say) wake_up_interruptible() can wake up the non- interruptible waiter(s), but I think this is fine. And in fact I think that abort_exclusive_wait() must die, see the next change. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Al Viro <viro@ZenIV.linux.org.uk> Cc: Bart Van Assche <bvanassche@acm.org> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Neil Brown <neilb@suse.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/20160906140047.GA6157@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-07-19new helper: wait_event_killable_exclusive()Al Viro1-0/+13
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2016-02-24sched/wait: Fix wait_event_freezable() documentationStafford Horne1-1/+1
I noticed the comment label 'wait_event' was wrong. Signed-off-by: Stafford Horne <shorne@gmail.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/1456234768-24933-1-git-send-email-shorne@gmail.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-01-13Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-nextLinus Torvalds1-0/+21
Pull networking updates from Davic Miller: 1) Support busy polling generically, for all NAPI drivers. From Eric Dumazet. 2) Add byte/packet counter support to nft_ct, from Floriani Westphal. 3) Add RSS/XPS support to mvneta driver, from Gregory Clement. 4) Implement IPV6_HDRINCL socket option for raw sockets, from Hannes Frederic Sowa. 5) Add support for T6 adapter to cxgb4 driver, from Hariprasad Shenai. 6) Add support for VLAN device bridging to mlxsw switch driver, from Ido Schimmel. 7) Add driver for Netronome NFP4000/NFP6000, from Jakub Kicinski. 8) Provide hwmon interface to mlxsw switch driver, from Jiri Pirko. 9) Reorganize wireless drivers into per-vendor directories just like we do for ethernet drivers. From Kalle Valo. 10) Provide a way for administrators "destroy" connected sockets via the SOCK_DESTROY socket netlink diag operation. From Lorenzo Colitti. 11) Add support to add/remove multicast routes via netlink, from Nikolay Aleksandrov. 12) Make TCP keepalive settings per-namespace, from Nikolay Borisov. 13) Add forwarding and packet duplication facilities to nf_tables, from Pablo Neira Ayuso. 14) Dead route support in MPLS, from Roopa Prabhu. 15) TSO support for thunderx chips, from Sunil Goutham. 16) Add driver for IBM's System i/p VNIC protocol, from Thomas Falcon. 17) Rationalize, consolidate, and more completely document the checksum offloading facilities in the networking stack. From Tom Herbert. 18) Support aborting an ongoing scan in mac80211/cfg80211, from Vidyullatha Kanchanapally. 19) Use per-bucket spinlock for bpf hash facility, from Tom Leiming. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1375 commits) net: bnxt: always return values from _bnxt_get_max_rings net: bpf: reject invalid shifts phonet: properly unshare skbs in phonet_rcv() dwc_eth_qos: Fix dma address for multi-fragment skbs phy: remove an unneeded condition mdio: remove an unneed condition mdio_bus: NULL dereference on allocation error net: Fix typo in netdev_intersect_features net: freescale: mac-fec: Fix build error from phy_device API change net: freescale: ucc_geth: Fix build error from phy_device API change bonding: Prevent IPv6 link local address on enslaved devices IB/mlx5: Add flow steering support net/mlx5_core: Export flow steering API net/mlx5_core: Make ipv4/ipv6 location more clear net/mlx5_core: Enable flow steering support for the IB driver net/mlx5_core: Initialize namespaces only when supported by device net/mlx5_core: Set priority attributes net/mlx5_core: Connect flow tables net/mlx5_core: Introduce modify flow table command net/mlx5_core: Managing root flow table ...
2016-01-06Merge branch 'sched/urgent' into sched/core, to pick up fixes before merging ↵Ingo Molnar1-5/+5
new patches Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-12-18Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-5/+5
Conflicts: drivers/net/geneve.c Here we had an overlapping change, where in 'net' the extraneous stats bump was being removed whilst in 'net-next' the final argument to udp_tunnel6_xmit_skb() was being changed. Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-14sched/wait: Fix the signal handling fixPeter Zijlstra1-5/+5
Jan Stancek reported that I wrecked things for him by fixing things for Vladimir :/ His report was due to an UNINTERRUPTIBLE wait getting -EINTR, which should not be possible, however my previous patch made this possible by unconditionally checking signal_pending(). We cannot use current->state as was done previously, because the instruction after the store to that variable it can be changed. We must instead pass the initial state along and use that. Fixes: 68985633bccb ("sched/wait: Fix signal handling in bit wait helpers") Reported-by: Jan Stancek <jstancek@redhat.com> Reported-by: Chris Mason <clm@fb.com> Tested-by: Jan Stancek <jstancek@redhat.com> Tested-by: Vladimir Murzin <vladimir.murzin@arm.com> Tested-by: Chris Mason <clm@fb.com> Reviewed-by: Paul Turner <pjt@google.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: tglx@linutronix.de Cc: Oleg Nesterov <oleg@redhat.com> Cc: hpa@zytor.com Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-11-30net: Generalise wq_has_sleeper helperHerbert Xu1-0/+21
The memory barrier in the helper wq_has_sleeper is needed by just about every user of waitqueue_active. This patch generalises it by making it take a wait_queue_head_t directly. The existing helper is renamed to skwq_has_sleeper. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-11-23sched/wait: Document waitqueue_active()Peter Zijlstra1-0/+30
Kosuku reports that there were a fair number of buggy waitqueue_active() users and this function deserves a big comment in order to avoid growing more. Reported-by: Kosuke Tatsukawa <tatsu@ab.jp.nec.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-09-23userfaultfd: revert "userfaultfd: waitqueue: add nr wake parameter to ↵Andrea Arcangeli1-3/+2
__wake_up_locked_key" This reverts commit 51360155eccb907ff8635bd10fc7de876408c2e0 and adapts fs/userfaultfd.c to use the old version of that function. It didn't look robust to call __wake_up_common with "nr == 1" when we absolutely require wakeall semantics, but we've full control of what we insert in the two waitqueue heads of the blocked userfaults. No exclusive waitqueue risks to be inserted into those two waitqueue heads so we can as well stick to "nr == 1" of the old code and we can rely purely on the fact no waitqueue inserted in one of the two waitqueue heads we must enforce as wakeall, has wait->flags WQ_FLAG_EXCLUSIVE set. Signed-off-by: Andrea Arcangeli <aarcange@redhat.com> Cc: Dr. David Alan Gilbert <dgilbert@redhat.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Shuah Khan <shuahkh@osg.samsung.com> Cc: Thierry Reding <treding@nvidia.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-09-05userfaultfd: waitqueue: add nr wake parameter to __wake_up_locked_keyAndrea Arcangeli1-2/+3
userfaultfd needs to wake all waitqueues (pass 0 as nr parameter), instead of the current hardcoded 1 (that would wake just the first waitqueue in the head list). Signed-off-by: Andrea Arcangeli <aarcange@redhat.com> Acked-by: Pavel Emelyanov <xemul@parallels.com> Cc: Sanidhya Kashyap <sanidhya.gatech@gmail.com> Cc: zhang.zhanghailiang@huawei.com Cc: "Kirill A. Shutemov" <kirill@shutemov.name> Cc: Andres Lagar-Cavilla <andreslc@google.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Rik van Riel <riel@redhat.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Hugh Dickins <hughd@google.com> Cc: Peter Feiner <pfeiner@google.com> Cc: "Dr. David Alan Gilbert" <dgilbert@redhat.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: "Huangpeng (Peter)" <peter.huangpeng@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-06-29Merge tag 'md/4.2' of git://neil.brown.name/mdLinus Torvalds1-0/+13
Pull md updates from Neil Brown: "A mixed bag - a few bug fixes - some performance improvement that decrease lock contention - some clean-up Nothing major" * tag 'md/4.2' of git://neil.brown.name/md: md: clear Blocked flag on failed devices when array is read-only. md: unlock mddev_lock on an error path. md: clear mddev->private when it has been freed. md: fix a build warning md/raid5: ignore released_stripes check md/raid5: per hash value and exclusive wait_for_stripe md/raid5: split wait_for_stripe and introduce wait_for_quiescent wait: introduce wait_event_exclusive_cmd md: convert to kstrto*() md/raid10: make sync_request_write() call bio_copy_data()
2015-06-17wait: introduce wait_event_exclusive_cmdYuanhan Liu1-0/+13
It's just a variant of wait_event_cmd(), with exclusive flag being set. For cases like RAID5, which puts many processes to sleep until 1/4 resources are free, a wake_up wakes up all processes to run, but there is one process being able to get the resource as it's protected by a spin lock. That ends up introducing heavy lock contentions, and hurts performance badly. Here introduce wait_event_exclusive_cmd to relieve the lock contention naturally by letting wake_up just wake up one process. Cc: Ingo Molnar <mingo@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> v2: its assumed that wait*() and __wait*() have the same arguments - peterz Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com> Signed-off-by: NeilBrown <neilb@suse.de>
2015-05-08sched/wait: Change wait_on_bit*() to take an unsigned long *, not a void *Palmer Dabbelt1-7/+10
The implementations of wait_on_bit*() will only work with long-aligned memory on systems that don't support misaligned loads and stores. This patch changes the function prototypes to ensure that the compiler will enforce alignment. Running make defconfig make KFLAGS="-Werror" seems to indicate that, as of c56fb6564dcd ("Fix a misaligned load inside ptrace_attach()"), there are now no users of non-long-aligned calls to wait_on_bit*(). I additionally tried a few "make randconfig" attempts, none of which failed to compile for this reason. Signed-off-by: Palmer Dabbelt <palmer@dabbelt.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Chris Metcalf <cmetcalf@ezchip.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Borislav Petkov <bp@alien8.de> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: bobby.prani@gmail.com Cc: oleg@redhat.com Cc: paulmck@linux.vnet.ibm.com Cc: richard@nod.at Cc: vdavydov@parallels.com Link: http://lkml.kernel.org/r/1430453997-32459-3-git-send-email-palmer@dabbelt.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-02-13Merge branch 'for-3.20/drivers' of git://git.kernel.dk/linux-blockLinus Torvalds1-0/+15
Pull block driver changes from Jens Axboe: "This contains: - The 4k/partition fixes for brd from Boaz/Matthew. - A few xen front/back block fixes from David Vrabel and Roger Pau Monne. - Floppy changes from Takashi, cleaning the device file creation. - Switching libata to use the new blk-mq tagging policy, removing code (and a suboptimal implementation) from libata. This will throw you a merge conflict, since a bug in the original libata tagging code was fixed since this code was branched. Trivial. From Shaohua. - Conversion of loop to blk-mq, from Ming Lei. - Cleanup of the io_schedule() handling in bsg from Peter Zijlstra. He claims it improves on unreadable code, which will cost him a beer. - Maintainer update or NDB, now handled by Markus Pargmann. - NVMe: - Optimization from me that avoids a kmalloc/kfree per IO for smaller (<= 8KB) IO. This cuts about 1% of high IOPS CPU overhead. - Removal of (now) dead RCU code, a relic from before NVMe was converted to blk-mq" * 'for-3.20/drivers' of git://git.kernel.dk/linux-block: xen-blkback: default to X86_32 ABI on x86 xen-blkfront: fix accounting of reqs when migrating xen-blkback,xen-blkfront: add myself as maintainer block: Simplify bsg complete all floppy: Avoid manual call of device_create_file() NVMe: avoid kmalloc/kfree for smaller IO MAINTAINERS: Update NBD maintainer libata: make sata_sil24 use fifo tag allocator libata: move sas ata tag allocation to libata-scsi.c libata: use blk taging NVMe: within nvme_free_queues(), delete RCU sychro/deferred free null_blk: suppress invalid partition info brd: Request from fdisk 4k alignment brd: Fix all partitions BUGs axonram: Fix bug in direct_access loop: add blk-mq.h include block: loop: don't handle REQ_FUA explicitly block: loop: introduce lo_discard() and lo_req_flush() block: loop: say goodby to bio block: loop: improve performance via blk-mq
2015-02-04block: Simplify bsg complete allPeter Zijlstra1-0/+15
It took me a few tries to figure out what this code did; lets rewrite it into a more regular form. The thing that makes this one 'special' is the BSG_F_BLOCK flag, if that is not set we're not supposed/allowed to block and should spin wait for completion. The (new) io_wait_event() will never see a false condition in case of the spinning and we will therefore not block. Cc: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Jens Axboe <axboe@fb.com>
2015-02-04sched/wait: Introduce wait_on_bit_timeout()Johan Hedberg1-0/+26
Add a new wait_on_bit_timeout() helper, basically the same as wait_on_bit() except that it also takes a 'timeout' parameter. All the building blocks like bit_wait_timeout() and out_of_line_wait_on_bit_timeout() are already in place so the addition is rather simple. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: davem@davemloft.net Cc: Linus Torvalds <torvalds@linux-foundation.org> Link: http://lkml.kernel.org/r/1422616476-2917-2-git-send-email-johan.hedberg@gmail.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-02-03sched/wait: Remove might_sleep() from wait_event_cmd()Mikulas Patocka1-1/+0
The patch e22b886a8a43 ("sched/wait: Add might_sleep() checks") introduced a bug in the raid5 subsystem. The function raid5_quiesce() (and resize_stripes()) uses the 'cmd' part to release and acquire a spinlock (so we call the sleep primitives in atomic context), and therefore we cannot do the might_sleep() check. Remove it. Fixes: e22b886a8a43 ("sched/wait: Add might_sleep() checks") Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Link: http://lkml.kernel.org/r/alpine.LRH.2.02.1502020935580.13510@file01.intranet.prod.int.rdu2.redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-11-04sched/wait: Reimplement wait_event_freezable()Peter Zijlstra1-0/+57
Provide better implementations of wait_event_freezable() APIs. The problem is with freezer_do_not_count(), it hides the thread from the freezer, even though this thread might not actually freeze/sleep at all. Cc: oleg@redhat.com Cc: Rafael Wysocki <rjw@rjwysocki.net> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Len Brown <len.brown@intel.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Pavel Machek <pavel@ucw.cz> Cc: Rafael J. Wysocki <rjw@rjwysocki.net> Cc: linux-pm@vger.kernel.org Link: http://lkml.kernel.org/n/tip-d86fz1jmso9wjxa8jfpinp8o@git.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-10-28sched/wait: Add might_sleep() checksPeter Zijlstra1-0/+16
Add more might_sleep() checks, suppose someone put a wait_event() like thing in a wait loop.. Can't put might_sleep() in ___wait_event() because there's the locked primitives which call ___wait_event() with locks held. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: tglx@linutronix.de Cc: ilya.dryomov@inktank.com Cc: umgwanakikbuti@gmail.com Cc: Oleg Nesterov <oleg@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Link: http://lkml.kernel.org/r/20140924082242.119255706@infradead.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-10-28sched/wait: Provide infrastructure to deal with nested blockingPeter Zijlstra1-1/+6
There are a few places that call blocking primitives from wait loops, provide infrastructure to support this without the typical task_struct::state collision. We record the wakeup in wait_queue_t::flags which leaves task_struct::state free to be used by others. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Oleg Nesterov <oleg@redhat.com> Cc: tglx@linutronix.de Cc: ilya.dryomov@inktank.com Cc: umgwanakikbuti@gmail.com Cc: Linus Torvalds <torvalds@linux-foundation.org> Link: http://lkml.kernel.org/r/20140924082242.051202318@infradead.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-10-13Merge branch 'sched-core-for-linus' of ↵Linus Torvalds1-6/+10
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull scheduler updates from Ingo Molnar: "The main changes in this cycle were: - Optimized support for Intel "Cluster-on-Die" (CoD) topologies (Dave Hansen) - Various sched/idle refinements for better idle handling (Nicolas Pitre, Daniel Lezcano, Chuansheng Liu, Vincent Guittot) - sched/numa updates and optimizations (Rik van Riel) - sysbench speedup (Vincent Guittot) - capacity calculation cleanups/refactoring (Vincent Guittot) - Various cleanups to thread group iteration (Oleg Nesterov) - Double-rq-lock removal optimization and various refactorings (Kirill Tkhai) - various sched/deadline fixes ... and lots of other changes" * 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (72 commits) sched/dl: Use dl_bw_of() under rcu_read_lock_sched() sched/fair: Delete resched_cpu() from idle_balance() sched, time: Fix build error with 64 bit cputime_t on 32 bit systems sched: Improve sysbench performance by fixing spurious active migration sched/x86: Fix up typo in topology detection x86, sched: Add new topology for multi-NUMA-node CPUs sched/rt: Use resched_curr() in task_tick_rt() sched: Use rq->rd in sched_setaffinity() under RCU read lock sched: cleanup: Rename 'out_unlock' to 'out_free_new_mask' sched: Use dl_bw_of() under RCU read lock sched/fair: Remove duplicate code from can_migrate_task() sched, mips, ia64: Remove __ARCH_WANT_UNLOCKED_CTXSW sched: print_rq(): Don't use tasklist_lock sched: normalize_rt_tasks(): Don't use _irqsave for tasklist_lock, use task_rq_lock() sched: Fix the task-group check in tg_has_rt_tasks() sched/fair: Leverage the idle state info when choosing the "idlest" cpu sched: Let the scheduler see CPU idle states sched/deadline: Fix inter- exclusive cpusets migrations sched/deadline: Clear dl_entity params when setscheduling to different class sched/numa: Kill the wrong/dead TASK_DEAD check in task_numa_fault() ...
2014-09-25SCHED: add some "wait..on_bit...timeout()" interfaces.NeilBrown1-1/+4
In commit c1221321b7c25b53204447cff9949a6d5a7ddddc sched: Allow wait_on_bit_action() functions to support a timeout I suggested that a "wait_on_bit_timeout()" interface would not meet my need. This isn't true - I was just over-engineering. Including a 'private' field in wait_bit_key instead of a focused "timeout" field was just premature generalization. If some other use is ever found, it can be generalized or added later. So this patch renames "private" to "timeout" with a meaning "stop waiting when "jiffies" reaches or passes "timeout", and adds two of the many possible wait..bit..timeout() interfaces: wait_on_page_bit_killable_timeout(), which is the one I want to use, and out_of_line_wait_on_bit_timeout() which is a reasonably general example. Others can be added as needed. Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: NeilBrown <neilb@suse.de> Acked-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2014-09-05sched/wait: Document timeout corner caseScot Doyle1-6/+10
The timeout may elapse without 0 being returned, such as when waiting on an unused queue. Document this possibility. Signed-off-by: Scot Doyle <lkml14@scotdoyle.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Link: http://lkml.kernel.org/r/alpine.LNX.2.11.1408241710070.6462@localhost.localdomain Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-07-16sched: Allow wait_on_bit_action() functions to support a timeoutNeilBrown1-8/+10
It is currently not possible for various wait_on_bit functions to implement a timeout. While the "action" function that is called to do the waiting could certainly use schedule_timeout(), there is no way to carry forward the remaining timeout after a false wake-up. As false-wakeups a clearly possible at least due to possible hash collisions in bit_waitqueue(), this is a real problem. The 'action' function is currently passed a pointer to the word containing the bit being waited on. No current action functions use this pointer. So changing it to something else will be a little noisy but will have no immediate effect. This patch changes the 'action' function to take a pointer to the "struct wait_bit_key", which contains a pointer to the word containing the bit so nothing is really lost. It also adds a 'private' field to "struct wait_bit_key", which is initialized to zero. An action function can now implement a timeout with something like static int timed_out_waiter(struct wait_bit_key *key) { unsigned long waited; if (key->private == 0) { key->private = jiffies; if (key->private == 0) key->private -= 1; } waited = jiffies - key->private; if (waited > 10 * HZ) return -EAGAIN; schedule_timeout(waited - 10 * HZ); return 0; } If any other need for context in a waiter were found it would be easy to use ->private for some other purpose, or even extend "struct wait_bit_key". My particular need is to support timeouts in nfs_release_page() to avoid deadlocks with loopback mounted NFS. While wait_on_bit_timeout() would be a cleaner interface, it will not meet my need. I need the timeout to be sensitive to the state of the connection with the server, which could change. So I need to use an 'action' interface. Signed-off-by: NeilBrown <neilb@suse.de> Acked-by: Peter Zijlstra <peterz@infradead.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Steve French <sfrench@samba.org> Cc: David Howells <dhowells@redhat.com> Cc: Steven Whitehouse <swhiteho@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Link: http://lkml.kernel.org/r/20140707051604.28027.41257.stgit@notabene.brown Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-07-16sched: Remove proliferation of wait_on_bit() action functionsNeilBrown1-4/+111
The current "wait_on_bit" interface requires an 'action' function to be provided which does the actual waiting. There are over 20 such functions, many of them identical. Most cases can be satisfied by one of just two functions, one which uses io_schedule() and one which just uses schedule(). So: Rename wait_on_bit and wait_on_bit_lock to wait_on_bit_action and wait_on_bit_lock_action to make it explicit that they need an action function. Introduce new wait_on_bit{,_lock} and wait_on_bit{,_lock}_io which are *not* given an action function but implicitly use a standard one. The decision to error-out if a signal is pending is now made based on the 'mode' argument rather than being encoded in the action function. All instances of the old wait_on_bit and wait_on_bit_lock which can use the new version have been changed accordingly and their action functions have been discarded. wait_on_bit{_lock} does not return any specific error code in the event of a signal so the caller must check for non-zero and interpolate their own error code as appropriate. The wait_on_bit() call in __fscache_wait_on_invalidate() was ambiguous as it specified TASK_UNINTERRUPTIBLE but used fscache_wait_bit_interruptible as an action function. David Howells confirms this should be uniformly "uninterruptible" The main remaining user of wait_on_bit{,_lock}_action is NFS which needs to use a freezer-aware schedule() call. A comment in fs/gfs2/glock.c notes that having multiple 'action' functions is useful as they display differently in the 'wchan' field of 'ps'. (and /proc/$PID/wchan). As the new bit_wait{,_io} functions are tagged "__sched", they will not show up at all, but something higher in the stack. So the distinction will still be visible, only with different function names (gds2_glock_wait versus gfs2_glock_dq_wait in the gfs2/glock.c case). Since first version of this patch (against 3.15) two new action functions appeared, on in NFS and one in CIFS. CIFS also now uses an action function that makes the same freezer aware schedule call as NFS. Signed-off-by: NeilBrown <neilb@suse.de> Acked-by: David Howells <dhowells@redhat.com> (fscache, keys) Acked-by: Steven Whitehouse <swhiteho@redhat.com> (gfs2) Acked-by: Peter Zijlstra <peterz@infradead.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Steve French <sfrench@samba.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Link: http://lkml.kernel.org/r/20140707051603.28027.72349.stgit@notabene.brown Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-04-19wait: explain the shadowing and type inconsistenciesPeter Zijlstra1-1/+13
Stick in a comment before someone else tries to fix the sparse warning this generates. Suggested-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/n/tip-o2ro6f3vkxklni0bc8f7m68s@git.kernel.org Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-07sched: remove sleep_on() and friendsArnd Bergmann1-11/+0
This is the final piece in the puzzle, as all patches to remove the last users of \(interruptible_\|\)sleep_on\(_timeout\|\) have made it into the 3.15 merge window. The work was long overdue, and this interface in particular should not have survived the BKL removal that was done a couple of years ago. Citing Jon Corbet from http://lwn.net/2001/0201/kernel.php3": "[...] it was suggested that the janitors look for and fix all code that calls sleep_on() [...] since (1) almost all such code is incorrect, and (2) Linus has agreed that those functions should be removed in the 2.5 development series". We haven't quite made it for 2.5, but maybe we can merge this for 3.15. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ingo Molnar <mingo@kernel.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-01-22sched: Fix warning on make htmldocs caused by wait.hMasanari Iida1-2/+2
Missing "@" in include/linux/wait.h cause "make htmldocs" failed with following warning messages. Warning(/home/iida/Repo/linux-next//include/linux/wait.h:304): No description found for parameter 'cmd1' Warning(/home/iida/Repo/linux-next//include/linux/wait.h:304): No description found for parameter 'cmd2' Signed-off-by: Masanari Iida <standby24x7@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2013-11-14wait: add wait_event_cmd()Shaohua Li1-0/+25
Add a new API wait_event_cmd(). It's a variant of wait_even() with two commands executed. One is executed before sleep, another after sleep. Modified to match use wait.h approach based on suggestion by Peter Zijlstra <peterz@infradead.org> - neilb Signed-off-by: Shaohua Li <shli@fusionio.com> Signed-off-by: NeilBrown <neilb@suse.de>