summaryrefslogtreecommitdiff
path: root/include/linux/xattr.h
AgeCommit message (Collapse)AuthorFilesLines
2023-08-10tmpfs,xattr: enable limited user extended attributesHugh Dickins1-1/+2
Enable "user." extended attributes on tmpfs, limiting them by tracking the space they occupy, and deducting that space from the limited ispace (unless tmpfs mounted with nr_inodes=0 to leave that ispace unlimited). tmpfs inodes and simple xattrs are both unswappable, and have to be in lowmem on a 32-bit highmem kernel: so the ispace limit is appropriate for xattrs, without any need for a further mount option. Add simple_xattr_space() to give approximate but deterministic estimate of the space taken up by each xattr: with simple_xattrs_free() outputting the space freed if required (but kernfs and even some tmpfs usages do not require that, so don't waste time on strlen'ing if not needed). Security and trusted xattrs were already supported: for consistency and simplicity, account them from the same pool; though there's a small risk that a tmpfs with enough space before would now be considered too small. When extended attributes are used, "df -i" does show more IUsed and less IFree than can be explained by the inodes: document that (manpage later). xfstests tests/generic which were not run on tmpfs before but now pass: 020 037 062 070 077 097 103 117 337 377 454 486 523 533 611 618 728 with no new failures. Signed-off-by: Hugh Dickins <hughd@google.com> Reviewed-by: Jan Kara <jack@suse.cz> Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com> Message-Id: <2e63b26e-df46-5baa-c7d6-f9a8dd3282c5@google.com> Signed-off-by: Christian Brauner <brauner@kernel.org>
2023-08-09xattr: simple_xattr_set() return old_xattr to be freedHugh Dickins1-3/+4
tmpfs wants to support limited user extended attributes, but kernfs (or cgroupfs, the only kernfs with KERNFS_ROOT_SUPPORT_USER_XATTR) already supports user extended attributes through simple xattrs: but limited by a policy (128KiB per inode) too liberal to be used on tmpfs. To allow a different limiting policy for tmpfs, without affecting the policy for kernfs, change simple_xattr_set() to return the replaced or removed xattr (if any), leaving the caller to update their accounting then free the xattr (by simple_xattr_free(), renamed from the static free_simple_xattr()). Signed-off-by: Hugh Dickins <hughd@google.com> Reviewed-by: Jan Kara <jack@suse.cz> Reviewed-by: Christian Brauner <brauner@kernel.org> Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com> Message-Id: <158c6585-2aa7-d4aa-90ff-f7c3f8fe407c@google.com> Signed-off-by: Christian Brauner <brauner@kernel.org>
2023-03-06xattr: remove unused argumentChristian Brauner1-1/+1
his helpers is really just used to check for user.* xattr support so don't make it pointlessly generic. Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>
2023-03-06xattr: add listxattr helperChristian Brauner1-0/+16
Add a tiny helper to determine whether an xattr handler given a specific dentry supports listing the requested xattr. We will use this helper in various filesystems in later commits. Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>
2023-03-06xattr: simplify listxattr helpersChristian Brauner1-0/+1
The generic_listxattr() and simple_xattr_list() helpers list xattrs and contain duplicated code. Add two helpers that both generic_listxattr() and simple_xattr_list() can use. Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>
2023-01-19fs: port xattr to mnt_idmapChristian Brauner1-4/+4
Convert to struct mnt_idmap. Last cycle we merged the necessary infrastructure in 256c8aed2b42 ("fs: introduce dedicated idmap type for mounts"). This is just the conversion to struct mnt_idmap. Currently we still pass around the plain namespace that was attached to a mount. This is in general pretty convenient but it makes it easy to conflate namespaces that are relevant on the filesystem with namespaces that are relevent on the mount level. Especially for non-vfs developers without detailed knowledge in this area this can be a potential source for bugs. Once the conversion to struct mnt_idmap is done all helpers down to the really low-level helpers will take a struct mnt_idmap argument instead of two namespace arguments. This way it becomes impossible to conflate the two eliminating the possibility of any bugs. All of the vfs and all filesystems only operate on struct mnt_idmap. Acked-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>
2023-01-19fs: port ->permission() to pass mnt_idmapChristian Brauner1-6/+6
Convert to struct mnt_idmap. Last cycle we merged the necessary infrastructure in 256c8aed2b42 ("fs: introduce dedicated idmap type for mounts"). This is just the conversion to struct mnt_idmap. Currently we still pass around the plain namespace that was attached to a mount. This is in general pretty convenient but it makes it easy to conflate namespaces that are relevant on the filesystem with namespaces that are relevent on the mount level. Especially for non-vfs developers without detailed knowledge in this area this can be a potential source for bugs. Once the conversion to struct mnt_idmap is done all helpers down to the really low-level helpers will take a struct mnt_idmap argument instead of two namespace arguments. This way it becomes impossible to conflate the two eliminating the possibility of any bugs. All of the vfs and all filesystems only operate on struct mnt_idmap. Acked-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>
2022-12-13Merge tag 'fs.xattr.simple.rework.rbtree.rwlock.v6.2' of ↵Linus Torvalds1-29/+9
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/idmapping Pull simple-xattr updates from Christian Brauner: "This ports the simple xattr infrastucture to rely on a simple rbtree protected by a read-write lock instead of a linked list protected by a spinlock. A while ago we received reports about scaling issues for filesystems using the simple xattr infrastructure that also support setting a larger number of xattrs. Specifically, cgroups and tmpfs. Both cgroupfs and tmpfs can be mounted by unprivileged users in unprivileged containers and root in an unprivileged container can set an unrestricted number of security.* xattrs and privileged users can also set unlimited trusted.* xattrs. A few more words on further that below. Other xattrs such as user.* are restricted for kernfs-based instances to a fairly limited number. As there are apparently users that have a fairly large number of xattrs we should scale a bit better. Using a simple linked list protected by a spinlock used for set, get, and list operations doesn't scale well if users use a lot of xattrs even if it's not a crazy number. Let's switch to a simple rbtree protected by a rwlock. It scales way better and gets rid of the perf issues some people reported. We originally had fancier solutions even using an rcu+seqlock protected rbtree but we had concerns about being to clever and also that deletion from an rbtree with rcu+seqlock isn't entirely safe. The rbtree plus rwlock is perfectly fine. By far the most common operation is getting an xattr. While setting an xattr is not and should be comparatively rare. And listxattr() often only happens when copying xattrs between files or together with the contents to a new file. Holding a lock across listxattr() is unproblematic because it doesn't list the values of xattrs. It can only be used to list the names of all xattrs set on a file. And the number of xattr names that can be listed with listxattr() is limited to XATTR_LIST_MAX aka 65536 bytes. If a larger buffer is passed then vfs_listxattr() caps it to XATTR_LIST_MAX and if more xattr names are found it will return -E2BIG. In short, the maximum amount of memory that can be retrieved via listxattr() is limited and thus listxattr() bounded. Of course, the API is broken as documented on xattr(7) already. While I have no idea how the xattr api ended up in this state we should probably try to come up with something here at some point. An iterator pattern similar to readdir() as an alternative to listxattr() or something else. Right now it is extremly strange that users can set millions of xattrs but then can't use listxattr() to know which xattrs are actually set. And it's really trivial to do: for i in {1..1000000}; do setfattr -n security.$i -v $i ./file1; done And around 5000 xattrs it's impossible to use listxattr() to figure out which xattrs are actually set. So I have suggested that we try to limit the number of xattrs for simple xattrs at least. But that's a future patch and I don't consider it very urgent. A bonus of this port to rbtree+rwlock is that we shrink the memory consumption for users of the simple xattr infrastructure. This also adds kernel documentation to all the functions" * tag 'fs.xattr.simple.rework.rbtree.rwlock.v6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/idmapping: xattr: use rbtree for simple_xattrs
2022-12-13Merge tag 'lsm-pr-20221212' of ↵Linus Torvalds1-3/+3
git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/lsm Pull lsm updates from Paul Moore: - Improve the error handling in the device cgroup such that memory allocation failures when updating the access policy do not potentially alter the policy. - Some minor fixes to reiserfs to ensure that it properly releases LSM-related xattr values. - Update the security_socket_getpeersec_stream() LSM hook to take sockptr_t values. Previously the net/BPF folks updated the getsockopt code in the network stack to leverage the sockptr_t type to make it easier to pass both kernel and __user pointers, but unfortunately when they did so they didn't convert the LSM hook. While there was/is no immediate risk by not converting the LSM hook, it seems like this is a mistake waiting to happen so this patch proactively does the LSM hook conversion. - Convert vfs_getxattr_alloc() to return an int instead of a ssize_t and cleanup the callers. Internally the function was never going to return anything larger than an int and the callers were doing some very odd things casting the return value; this patch fixes all that and helps bring a bit of sanity to vfs_getxattr_alloc() and its callers. - More verbose, and helpful, LSM debug output when the system is booted with "lsm.debug" on the command line. There are examples in the commit description, but the quick summary is that this patch provides better information about which LSMs are enabled and the ordering in which they are processed. - General comment and kernel-doc fixes and cleanups. * tag 'lsm-pr-20221212' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/lsm: lsm: Fix description of fs_context_parse_param lsm: Add/fix return values in lsm_hooks.h and fix formatting lsm: Clarify documentation of vm_enough_memory hook reiserfs: Add missing calls to reiserfs_security_free() lsm,fs: fix vfs_getxattr_alloc() return type and caller error paths device_cgroup: Roll back to original exceptions after copy failure LSM: Better reporting of actual LSMs at boot lsm: make security_socket_getpeersec_stream() sockptr_t safe audit: Fix some kernel-doc warnings lsm: remove obsoleted comments for security hooks fs: edit a comment made in bad taste
2022-11-19lsm,fs: fix vfs_getxattr_alloc() return type and caller error pathsPaul Moore1-3/+3
The vfs_getxattr_alloc() function currently returns a ssize_t value despite the fact that it only uses int values internally for return values. Fix this by converting vfs_getxattr_alloc() to return an int type and adjust the callers as necessary. As part of these caller modifications, some of the callers are fixed to properly free the xattr value buffer on both success and failure to ensure that memory is not leaked in the failure case. Reviewed-by: Serge Hallyn <serge@hallyn.com> Reviewed-by: Mimi Zohar <zohar@linux.ibm.com> Signed-off-by: Paul Moore <paul@paul-moore.com>
2022-11-12xattr: use rbtree for simple_xattrsChristian Brauner1-29/+9
A while ago Vasily reported that it is possible to set a large number of xattrs on inodes of filesystems that make use of the simple xattr infrastructure. This includes all kernfs-based filesystems that support xattrs (e.g., cgroupfs and tmpfs). Both cgroupfs and tmpfs can be mounted by unprivileged users in unprivileged containers and root in an unprivileged container can set an unrestricted number of security.* xattrs and privileged users can also set unlimited trusted.* xattrs. As there are apparently users that have a fairly large number of xattrs we should scale a bit better. Other xattrs such as user.* are restricted for kernfs-based instances to a fairly limited number. Using a simple linked list protected by a spinlock used for set, get, and list operations doesn't scale well if users use a lot of xattrs even if it's not a crazy number. There's no need to bring in the big guns like rhashtables or rw semaphores for this. An rbtree with a rwlock, or limited rcu semanics and seqlock is enough. It scales within the constraints we are working in. By far the most common operation is getting an xattr. Setting xattrs should be a moderately rare operation. And listxattr() often only happens when copying xattrs between files or together with the contents to a new file. Holding a lock across listxattr() is unproblematic because it doesn't list the values of xattrs. It can only be used to list the names of all xattrs set on a file. And the number of xattr names that can be listed with listxattr() is limited to XATTR_LIST_MAX aka 65536 bytes. If a larger buffer is passed then vfs_listxattr() caps it to XATTR_LIST_MAX and if more xattr names are found it will return -E2BIG. In short, the maximum amount of memory that can be retrieved via listxattr() is limited. Of course, the API is broken as documented on xattr(7) already. In the future we might want to address this but for now this is the world we live in and have lived for a long time. But it does indeed mean that once an application goes over XATTR_LIST_MAX limit of xattrs set on an inode it isn't possible to copy the file and include its xattrs in the copy unless the caller knows all xattrs or limits the copy of the xattrs to important ones it knows by name (At least for tmpfs, and kernfs-based filesystems. Other filesystems might provide ways of achieving this.). Bonus of this port to rbtree+rwlock is that we shrink the memory consumption for users of the simple xattr infrastructure. Also add proper kernel documentation to all the functions. A big thanks to Paul for his comments. Cc: Vasily Averin <vvs@openvz.org> Cc: "Paul E. McKenney" <paulmck@kernel.org> Acked-by: Roman Gushchin <roman.gushchin@linux.dev> Acked-by: Paul E. McKenney <paulmck@kernel.org> Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>
2022-10-20ovl: use posix acl apiChristian Brauner1-0/+6
Now that posix acls have a proper api us it to copy them. All filesystems that can serve as lower or upper layers for overlayfs have gained support for the new posix acl api in previous patches. So switch all internal overlayfs codepaths for copying posix acls to the new posix acl api. Acked-by: Miklos Szeredi <miklos@szeredi.hu> Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>
2022-08-31xattr: constify value argument in vfs_setxattr()Christian Brauner1-1/+1
Now that we don't perform translations directly in vfs_setxattr() anymore we can constify the @value argument in vfs_setxattr(). This also allows us to remove the hack to cast from a const in ovl_do_setxattr(). Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org> Reviewed-by: Seth Forshee (DigitalOcean) <sforshee@kernel.org>
2022-07-15acl: move idmapped mount fixup into vfs_{g,s}etxattr()Christian Brauner1-1/+1
This cycle we added support for mounting overlayfs on top of idmapped mounts. Recently I've started looking into potential corner cases when trying to add additional tests and I noticed that reporting for POSIX ACLs is currently wrong when using idmapped layers with overlayfs mounted on top of it. I'm going to give a rather detailed explanation to both the origin of the problem and the solution. Let's assume the user creates the following directory layout and they have a rootfs /var/lib/lxc/c1/rootfs. The files in this rootfs are owned as you would expect files on your host system to be owned. For example, ~/.bashrc for your regular user would be owned by 1000:1000 and /root/.bashrc would be owned by 0:0. IOW, this is just regular boring filesystem tree on an ext4 or xfs filesystem. The user chooses to set POSIX ACLs using the setfacl binary granting the user with uid 4 read, write, and execute permissions for their .bashrc file: setfacl -m u:4:rwx /var/lib/lxc/c2/rootfs/home/ubuntu/.bashrc Now they to expose the whole rootfs to a container using an idmapped mount. So they first create: mkdir -pv /vol/contpool/{ctrover,merge,lowermap,overmap} mkdir -pv /vol/contpool/ctrover/{over,work} chown 10000000:10000000 /vol/contpool/ctrover/{over,work} The user now creates an idmapped mount for the rootfs: mount-idmapped/mount-idmapped --map-mount=b:0:10000000:65536 \ /var/lib/lxc/c2/rootfs \ /vol/contpool/lowermap This for example makes it so that /var/lib/lxc/c2/rootfs/home/ubuntu/.bashrc which is owned by uid and gid 1000 as being owned by uid and gid 10001000 at /vol/contpool/lowermap/home/ubuntu/.bashrc. Assume the user wants to expose these idmapped mounts through an overlayfs mount to a container. mount -t overlay overlay \ -o lowerdir=/vol/contpool/lowermap, \ upperdir=/vol/contpool/overmap/over, \ workdir=/vol/contpool/overmap/work \ /vol/contpool/merge The user can do this in two ways: (1) Mount overlayfs in the initial user namespace and expose it to the container. (2) Mount overlayfs on top of the idmapped mounts inside of the container's user namespace. Let's assume the user chooses the (1) option and mounts overlayfs on the host and then changes into a container which uses the idmapping 0:10000000:65536 which is the same used for the two idmapped mounts. Now the user tries to retrieve the POSIX ACLs using the getfacl command getfacl -n /vol/contpool/lowermap/home/ubuntu/.bashrc and to their surprise they see: # file: vol/contpool/merge/home/ubuntu/.bashrc # owner: 1000 # group: 1000 user::rw- user:4294967295:rwx group::r-- mask::rwx other::r-- indicating the the uid wasn't correctly translated according to the idmapped mount. The problem is how we currently translate POSIX ACLs. Let's inspect the callchain in this example: idmapped mount /vol/contpool/merge: 0:10000000:65536 caller's idmapping: 0:10000000:65536 overlayfs idmapping (ofs->creator_cred): 0:0:4k /* initial idmapping */ sys_getxattr() -> path_getxattr() -> getxattr() -> do_getxattr() |> vfs_getxattr() | -> __vfs_getxattr() | -> handler->get == ovl_posix_acl_xattr_get() | -> ovl_xattr_get() | -> vfs_getxattr() | -> __vfs_getxattr() | -> handler->get() /* lower filesystem callback */ |> posix_acl_fix_xattr_to_user() { 4 = make_kuid(&init_user_ns, 4); 4 = mapped_kuid_fs(&init_user_ns /* no idmapped mount */, 4); /* FAILURE */ -1 = from_kuid(0:10000000:65536 /* caller's idmapping */, 4); } If the user chooses to use option (2) and mounts overlayfs on top of idmapped mounts inside the container things don't look that much better: idmapped mount /vol/contpool/merge: 0:10000000:65536 caller's idmapping: 0:10000000:65536 overlayfs idmapping (ofs->creator_cred): 0:10000000:65536 sys_getxattr() -> path_getxattr() -> getxattr() -> do_getxattr() |> vfs_getxattr() | -> __vfs_getxattr() | -> handler->get == ovl_posix_acl_xattr_get() | -> ovl_xattr_get() | -> vfs_getxattr() | -> __vfs_getxattr() | -> handler->get() /* lower filesystem callback */ |> posix_acl_fix_xattr_to_user() { 4 = make_kuid(&init_user_ns, 4); 4 = mapped_kuid_fs(&init_user_ns, 4); /* FAILURE */ -1 = from_kuid(0:10000000:65536 /* caller's idmapping */, 4); } As is easily seen the problem arises because the idmapping of the lower mount isn't taken into account as all of this happens in do_gexattr(). But do_getxattr() is always called on an overlayfs mount and inode and thus cannot possible take the idmapping of the lower layers into account. This problem is similar for fscaps but there the translation happens as part of vfs_getxattr() already. Let's walk through an fscaps overlayfs callchain: setcap 'cap_net_raw+ep' /var/lib/lxc/c2/rootfs/home/ubuntu/.bashrc The expected outcome here is that we'll receive the cap_net_raw capability as we are able to map the uid associated with the fscap to 0 within our container. IOW, we want to see 0 as the result of the idmapping translations. If the user chooses option (1) we get the following callchain for fscaps: idmapped mount /vol/contpool/merge: 0:10000000:65536 caller's idmapping: 0:10000000:65536 overlayfs idmapping (ofs->creator_cred): 0:0:4k /* initial idmapping */ sys_getxattr() -> path_getxattr() -> getxattr() -> do_getxattr() -> vfs_getxattr() -> xattr_getsecurity() -> security_inode_getsecurity() ________________________________ -> cap_inode_getsecurity() | | { V | 10000000 = make_kuid(0:0:4k /* overlayfs idmapping */, 10000000); | 10000000 = mapped_kuid_fs(0:0:4k /* no idmapped mount */, 10000000); | /* Expected result is 0 and thus that we own the fscap. */ | 0 = from_kuid(0:10000000:65536 /* caller's idmapping */, 10000000); | } | -> vfs_getxattr_alloc() | -> handler->get == ovl_other_xattr_get() | -> vfs_getxattr() | -> xattr_getsecurity() | -> security_inode_getsecurity() | -> cap_inode_getsecurity() | { | 0 = make_kuid(0:0:4k /* lower s_user_ns */, 0); | 10000000 = mapped_kuid_fs(0:10000000:65536 /* idmapped mount */, 0); | 10000000 = from_kuid(0:0:4k /* overlayfs idmapping */, 10000000); | |____________________________________________________________________| } -> vfs_getxattr_alloc() -> handler->get == /* lower filesystem callback */ And if the user chooses option (2) we get: idmapped mount /vol/contpool/merge: 0:10000000:65536 caller's idmapping: 0:10000000:65536 overlayfs idmapping (ofs->creator_cred): 0:10000000:65536 sys_getxattr() -> path_getxattr() -> getxattr() -> do_getxattr() -> vfs_getxattr() -> xattr_getsecurity() -> security_inode_getsecurity() _______________________________ -> cap_inode_getsecurity() | | { V | 10000000 = make_kuid(0:10000000:65536 /* overlayfs idmapping */, 0); | 10000000 = mapped_kuid_fs(0:0:4k /* no idmapped mount */, 10000000); | /* Expected result is 0 and thus that we own the fscap. */ | 0 = from_kuid(0:10000000:65536 /* caller's idmapping */, 10000000); | } | -> vfs_getxattr_alloc() | -> handler->get == ovl_other_xattr_get() | |-> vfs_getxattr() | -> xattr_getsecurity() | -> security_inode_getsecurity() | -> cap_inode_getsecurity() | { | 0 = make_kuid(0:0:4k /* lower s_user_ns */, 0); | 10000000 = mapped_kuid_fs(0:10000000:65536 /* idmapped mount */, 0); | 0 = from_kuid(0:10000000:65536 /* overlayfs idmapping */, 10000000); | |____________________________________________________________________| } -> vfs_getxattr_alloc() -> handler->get == /* lower filesystem callback */ We can see how the translation happens correctly in those cases as the conversion happens within the vfs_getxattr() helper. For POSIX ACLs we need to do something similar. However, in contrast to fscaps we cannot apply the fix directly to the kernel internal posix acl data structure as this would alter the cached values and would also require a rework of how we currently deal with POSIX ACLs in general which almost never take the filesystem idmapping into account (the noteable exception being FUSE but even there the implementation is special) and instead retrieve the raw values based on the initial idmapping. The correct values are then generated right before returning to userspace. The fix for this is to move taking the mount's idmapping into account directly in vfs_getxattr() instead of having it be part of posix_acl_fix_xattr_to_user(). To this end we split out two small and unexported helpers posix_acl_getxattr_idmapped_mnt() and posix_acl_setxattr_idmapped_mnt(). The former to be called in vfs_getxattr() and the latter to be called in vfs_setxattr(). Let's go back to the original example. Assume the user chose option (1) and mounted overlayfs on top of idmapped mounts on the host: idmapped mount /vol/contpool/merge: 0:10000000:65536 caller's idmapping: 0:10000000:65536 overlayfs idmapping (ofs->creator_cred): 0:0:4k /* initial idmapping */ sys_getxattr() -> path_getxattr() -> getxattr() -> do_getxattr() |> vfs_getxattr() | |> __vfs_getxattr() | | -> handler->get == ovl_posix_acl_xattr_get() | | -> ovl_xattr_get() | | -> vfs_getxattr() | | |> __vfs_getxattr() | | | -> handler->get() /* lower filesystem callback */ | | |> posix_acl_getxattr_idmapped_mnt() | | { | | 4 = make_kuid(&init_user_ns, 4); | | 10000004 = mapped_kuid_fs(0:10000000:65536 /* lower idmapped mount */, 4); | | 10000004 = from_kuid(&init_user_ns, 10000004); | | |_______________________ | | } | | | | | |> posix_acl_getxattr_idmapped_mnt() | | { | | V | 10000004 = make_kuid(&init_user_ns, 10000004); | 10000004 = mapped_kuid_fs(&init_user_ns /* no idmapped mount */, 10000004); | 10000004 = from_kuid(&init_user_ns, 10000004); | } |_________________________________________________ | | | | |> posix_acl_fix_xattr_to_user() | { V 10000004 = make_kuid(0:0:4k /* init_user_ns */, 10000004); /* SUCCESS */ 4 = from_kuid(0:10000000:65536 /* caller's idmapping */, 10000004); } And similarly if the user chooses option (1) and mounted overayfs on top of idmapped mounts inside the container: idmapped mount /vol/contpool/merge: 0:10000000:65536 caller's idmapping: 0:10000000:65536 overlayfs idmapping (ofs->creator_cred): 0:10000000:65536 sys_getxattr() -> path_getxattr() -> getxattr() -> do_getxattr() |> vfs_getxattr() | |> __vfs_getxattr() | | -> handler->get == ovl_posix_acl_xattr_get() | | -> ovl_xattr_get() | | -> vfs_getxattr() | | |> __vfs_getxattr() | | | -> handler->get() /* lower filesystem callback */ | | |> posix_acl_getxattr_idmapped_mnt() | | { | | 4 = make_kuid(&init_user_ns, 4); | | 10000004 = mapped_kuid_fs(0:10000000:65536 /* lower idmapped mount */, 4); | | 10000004 = from_kuid(&init_user_ns, 10000004); | | |_______________________ | | } | | | | | |> posix_acl_getxattr_idmapped_mnt() | | { V | 10000004 = make_kuid(&init_user_ns, 10000004); | 10000004 = mapped_kuid_fs(&init_user_ns /* no idmapped mount */, 10000004); | 10000004 = from_kuid(0(&init_user_ns, 10000004); | |_________________________________________________ | } | | | |> posix_acl_fix_xattr_to_user() | { V 10000004 = make_kuid(0:0:4k /* init_user_ns */, 10000004); /* SUCCESS */ 4 = from_kuid(0:10000000:65536 /* caller's idmappings */, 10000004); } The last remaining problem we need to fix here is ovl_get_acl(). During ovl_permission() overlayfs will call: ovl_permission() -> generic_permission() -> acl_permission_check() -> check_acl() -> get_acl() -> inode->i_op->get_acl() == ovl_get_acl() > get_acl() /* on the underlying filesystem) ->inode->i_op->get_acl() == /*lower filesystem callback */ -> posix_acl_permission() passing through the get_acl request to the underlying filesystem. This will retrieve the acls stored in the lower filesystem without taking the idmapping of the underlying mount into account as this would mean altering the cached values for the lower filesystem. So we block using ACLs for now until we decided on a nice way to fix this. Note this limitation both in the documentation and in the code. The most straightforward solution would be to have ovl_get_acl() simply duplicate the ACLs, update the values according to the idmapped mount and return it to acl_permission_check() so it can be used in posix_acl_permission() forgetting them afterwards. This is a bit heavy handed but fairly straightforward otherwise. Link: https://github.com/brauner/mount-idmapped/issues/9 Link: https://lore.kernel.org/r/20220708090134.385160-2-brauner@kernel.org Cc: Seth Forshee <sforshee@digitalocean.com> Cc: Amir Goldstein <amir73il@gmail.com> Cc: Vivek Goyal <vgoyal@redhat.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Aleksa Sarai <cyphar@cyphar.com> Cc: Miklos Szeredi <mszeredi@redhat.com> Cc: linux-unionfs@vger.kernel.org Cc: linux-fsdevel@vger.kernel.org Reviewed-by: Seth Forshee <sforshee@digitalocean.com> Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>
2021-01-24xattr: handle idmapped mountsTycho Andersen1-9/+18
When interacting with extended attributes the vfs verifies that the caller is privileged over the inode with which the extended attribute is associated. For posix access and posix default extended attributes a uid or gid can be stored on-disk. Let the functions handle posix extended attributes on idmapped mounts. If the inode is accessed through an idmapped mount we need to map it according to the mount's user namespace. Afterwards the checks are identical to non-idmapped mounts. This has no effect for e.g. security xattrs since they don't store uids or gids and don't perform permission checks on them like posix acls do. Link: https://lore.kernel.org/r/20210121131959.646623-10-christian.brauner@ubuntu.com Cc: Christoph Hellwig <hch@lst.de> Cc: David Howells <dhowells@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: linux-fsdevel@vger.kernel.org Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: James Morris <jamorris@linux.microsoft.com> Signed-off-by: Tycho Andersen <tycho@tycho.pizza> Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
2021-01-24acl: handle idmapped mountsChristian Brauner1-1/+2
The posix acl permission checking helpers determine whether a caller is privileged over an inode according to the acls associated with the inode. Add helpers that make it possible to handle acls on idmapped mounts. The vfs and the filesystems targeted by this first iteration make use of posix_acl_fix_xattr_from_user() and posix_acl_fix_xattr_to_user() to translate basic posix access and default permissions such as the ACL_USER and ACL_GROUP type according to the initial user namespace (or the superblock's user namespace) to and from the caller's current user namespace. Adapt these two helpers to handle idmapped mounts whereby we either map from or into the mount's user namespace depending on in which direction we're translating. Similarly, cap_convert_nscap() is used by the vfs to translate user namespace and non-user namespace aware filesystem capabilities from the superblock's user namespace to the caller's user namespace. Enable it to handle idmapped mounts by accounting for the mount's user namespace. In addition the fileystems targeted in the first iteration of this patch series make use of the posix_acl_chmod() and, posix_acl_update_mode() helpers. Both helpers perform permission checks on the target inode. Let them handle idmapped mounts. These two helpers are called when posix acls are set by the respective filesystems to handle this case we extend the ->set() method to take an additional user namespace argument to pass the mount's user namespace down. Link: https://lore.kernel.org/r/20210121131959.646623-9-christian.brauner@ubuntu.com Cc: Christoph Hellwig <hch@lst.de> Cc: David Howells <dhowells@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: linux-fsdevel@vger.kernel.org Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
2020-08-09Merge tag 'nfsd-5.9' of git://git.linux-nfs.org/projects/cel/cel-2.6Linus Torvalds1-0/+4
Pull NFS server updates from Chuck Lever: "Highlights: - Support for user extended attributes on NFS (RFC 8276) - Further reduce unnecessary NFSv4 delegation recalls Notable fixes: - Fix recent krb5p regression - Address a few resource leaks and a rare NULL dereference Other: - De-duplicate RPC/RDMA error handling and other utility functions - Replace storage and display of kernel memory addresses by tracepoints" * tag 'nfsd-5.9' of git://git.linux-nfs.org/projects/cel/cel-2.6: (38 commits) svcrdma: CM event handler clean up svcrdma: Remove transport reference counting svcrdma: Fix another Receive buffer leak SUNRPC: Refresh the show_rqstp_flags() macro nfsd: netns.h: delete a duplicated word SUNRPC: Fix ("SUNRPC: Add "@len" parameter to gss_unwrap()") nfsd: avoid a NULL dereference in __cld_pipe_upcall() nfsd4: a client's own opens needn't prevent delegations nfsd: Use seq_putc() in two functions svcrdma: Display chunk completion ID when posting a rw_ctxt svcrdma: Record send_ctxt completion ID in trace_svcrdma_post_send() svcrdma: Introduce Send completion IDs svcrdma: Record Receive completion ID in svc_rdma_decode_rqst svcrdma: Introduce Receive completion IDs svcrdma: Introduce infrastructure to support completion IDs svcrdma: Add common XDR encoders for RDMA and Read segments svcrdma: Add common XDR decoders for RDMA and Read segments SUNRPC: Add helpers for decoding list discriminators symbolically svcrdma: Remove declarations for functions long removed svcrdma: Clean up trace_svcrdma_send_failed() tracepoint ...
2020-07-24vfs/xattr: mm/shmem: kernfs: release simple xattr entry in a right wayChengguang Xu1-1/+2
After commit fdc85222d58e ("kernfs: kvmalloc xattr value instead of kmalloc"), simple xattr entry is allocated with kvmalloc() instead of kmalloc(), so we should release it with kvfree() instead of kfree(). Fixes: fdc85222d58e ("kernfs: kvmalloc xattr value instead of kmalloc") Signed-off-by: Chengguang Xu <cgxu519@mykernel.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: Hugh Dickins <hughd@google.com> Acked-by: Tejun Heo <tj@kernel.org> Cc: Daniel Xu <dxu@dxuuu.xyz> Cc: Chris Down <chris@chrisdown.name> Cc: Andreas Dilger <adilger@dilger.ca> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: <stable@vger.kernel.org> [5.7] Link: http://lkml.kernel.org/r/20200704051608.15043-1-cgxu519@mykernel.net Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-07-14xattr: add a function to check if a namespace is supportedFrank van der Linden1-0/+2
Add a function that checks is an extended attribute namespace is supported for an inode, meaning that a handler must be present for either the whole namespace, or at least one synthetic xattr in the namespace. To be used by the nfs server code when being queried for extended attributes support. Cc: linux-fsdevel@vger.kernel.org Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Frank van der Linden <fllinden@amazon.com> Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
2020-07-14xattr: break delegations in {set,remove}xattrFrank van der Linden1-0/+2
set/removexattr on an exported filesystem should break NFS delegations. This is true in general, but also for the upcoming support for RFC 8726 (NFSv4 extended attribute support). Make sure that they do. Additionally, they need to grow a _locked variant, since callers might call this with i_rwsem held (like the NFS server code). Cc: stable@vger.kernel.org # v4.9+ Cc: linux-fsdevel@vger.kernel.org Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Frank van der Linden <fllinden@amazon.com> Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
2020-04-18xattr.h: Replace zero-length array with flexible-array memberGustavo A. R. Silva1-1/+1
The current codebase makes use of the zero-length array language extension to the C90 standard, but the preferred mechanism to declare variable-length types such as these ones is a flexible array member[1][2], introduced in C99: struct foo { int stuff; struct boo array[]; }; By making use of the mechanism above, we will get a compiler warning in case the flexible array does not occur last in the structure, which will help us prevent some kind of undefined behavior bugs from being inadvertently introduced[3] to the codebase from now on. Also, notice that, dynamic memory allocations won't be affected by this change: "Flexible array members have incomplete type, and so the sizeof operator may not be applied. As a quirk of the original implementation of zero-length arrays, sizeof evaluates to zero."[1] This issue was found with the help of Coccinelle. [1] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html [2] https://github.com/KSPP/linux/issues/21 [3] commit 76497732932f ("cxgb3/l2t: Fix undefined behaviour") Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
2020-03-16kernfs: Add removed_size out param for simple_xattr_setDaniel Xu1-1/+2
This helps set up size accounting in the next commit. Without this out param, it's difficult to find out the removed xattr size without taking a lock for longer and walking the xattr linked list twice. Signed-off-by: Daniel Xu <dxu@dxuuu.xyz> Acked-by: Chris Down <chris@chrisdown.name> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Tejun Heo <tj@kernel.org>
2018-05-14make xattr_getsecurity() staticAl Viro1-1/+0
many years overdue... Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2017-11-02License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseGreg Kroah-Hartman1-0/+1
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-10-08vfs: Remove {get,set,remove}xattr inode operationsAndreas Gruenbacher1-4/+0
These inode operations are no longer used; remove them. Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2016-10-08xattr: Add __vfs_{get,set,remove}xattr helpersAndreas Gruenbacher1-0/+3
Right now, various places in the kernel check for the existence of getxattr, setxattr, and removexattr inode operations and directly call those operations. Switch to helper functions and test for the IOP_XATTR flag instead. Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com> Acked-by: James Morris <james.l.morris@oracle.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2016-05-28switch ->setxattr() to passing dentry and inode separatelyAl Viro1-1/+2
smack ->d_instantiate() uses ->setxattr(), so to be able to call it before we'd hashed the new dentry and attached it to inode, we need ->setxattr() instances getting the inode as an explicit argument rather than obtaining it from dentry. Similar change for ->getxattr() had been done in commit ce23e64. Unlike ->getxattr() (which is used by both selinux and smack instances of ->d_instantiate()) ->setxattr() is used only by smack one and unfortunately it got missed back then. Reported-by: Seung-Woo Kim <sw0312.kim@samsung.com> Tested-by: Casey Schaufler <casey@schaufler-ca.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2016-05-27switch xattr_handler->set() to passing dentry and inode separatelyAl Viro1-2/+2
preparation for similar switch in ->setxattr() (see the next commit for rationale). Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2016-04-11->getxattr(): pass dentry and inode as separate argumentsAl Viro1-1/+1
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2016-04-11xattr_handler: pass dentry and inode as separate arguments of ->get()Al Viro1-1/+2
... and do not assume they are already attached to each other Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-12-14xattr handlers: Simplify list operationAndreas Gruenbacher1-3/+1
Change the list operation to only return whether or not an attribute should be listed. Copying the attribute names into the buffer is moved to the callers. Since the result only depends on the dentry and not on the attribute name, we do not pass the attribute name to list operations. Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-12-07tmpfs: listxattr should include POSIX ACL xattrsAndreas Gruenbacher1-1/+2
When a file on tmpfs has an ACL or a Default ACL, listxattr should include the corresponding xattr name. Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com> Reviewed-by: James Morris <james.l.morris@oracle.com> Cc: Hugh Dickins <hughd@google.com> Cc: linux-mm@kvack.org Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-12-07tmpfs: Use xattr handler infrastructureAndreas Gruenbacher1-3/+1
Use the VFS xattr handler infrastructure and get rid of similar code in the filesystem. For implementing shmem_xattr_handler_set, we need a version of simple_xattr_set which removes the attribute when value is NULL. Use this to implement kernfs_iop_removexattr as well. Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com> Reviewed-by: James Morris <james.l.morris@oracle.com> Cc: Hugh Dickins <hughd@google.com> Cc: linux-mm@kvack.org Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-12-07vfs: Distinguish between full xattr names and proper prefixesAndreas Gruenbacher1-0/+11
Add an additional "name" field to struct xattr_handler. When the name is set, the handler matches attributes with exactly that name. When the prefix is set instead, the handler matches attributes with the given prefix and with a non-empty suffix. This patch should avoid bugs like the one fixed in commit c361016a in the future. Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com> Reviewed-by: James Morris <james.l.morris@oracle.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-12-07vfs: Remove vfs_xattr_cmpAndreas Gruenbacher1-2/+0
This function was only briefly used in security/integrity/evm, between commits 66dbc325 and 15647eb3. Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com> Reviewed-by: James Morris <james.l.morris@oracle.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-11-149p: xattr simplificationsAndreas Gruenbacher1-7/+11
Now that the xattr handler is passed to the xattr handler operations, we can use the same get and set operations for the user, trusted, and security xattr namespaces. In those namespaces, we can access the full attribute name by "reattaching" the name prefix the vfs has skipped for us. Add a xattr_full_name helper to make this obvious in the code. For the "system.posix_acl_access" and "system.posix_acl_default" attributes, handler->prefix is the full attribute name; the suffix is the empty string. Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com> Cc: Eric Van Hensbergen <ericvh@gmail.com> Cc: Ron Minnich <rminnich@sandia.gov> Cc: Latchesar Ionkov <lucho@ionkov.net> Cc: v9fs-developer@lists.sourceforge.net Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-07-25xattr: Constify ->name member of "struct xattr".Tetsuo Handa1-1/+1
Since everybody sets kstrdup()ed constant string to "struct xattr"->name but nobody modifies "struct xattr"->name , we can omit kstrdup() and its failure checking by constifying ->name member of "struct xattr". Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Reviewed-by: Joel Becker <jlbec@evilplan.org> [ocfs2] Acked-by: Serge E. Hallyn <serge.hallyn@ubuntu.com> Acked-by: Casey Schaufler <casey@schaufler-ca.com> Acked-by: Mimi Zohar <zohar@linux.vnet.ibm.com> Reviewed-by: Paul Moore <paul@paul-moore.com> Tested-by: Paul Moore <paul@paul-moore.com> Acked-by: Eric Paris <eparis@redhat.com> Signed-off-by: James Morris <james.l.morris@oracle.com>
2012-10-13UAPI: (Scripted) Disintegrate include/linuxDavid Howells1-53/+1
Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Michael Kerrisk <mtk.manpages@gmail.com> Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Acked-by: Dave Jones <davej@redhat.com>
2012-10-03Merge branch 'next' of ↵Linus Torvalds1-0/+3
git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security Pull security subsystem updates from James Morris: "Highlights: - Integrity: add local fs integrity verification to detect offline attacks - Integrity: add digital signature verification - Simple stacking of Yama with other LSMs (per LSS discussions) - IBM vTPM support on ppc64 - Add new driver for Infineon I2C TIS TPM - Smack: add rule revocation for subject labels" Fixed conflicts with the user namespace support in kernel/auditsc.c and security/integrity/ima/ima_policy.c. * 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security: (39 commits) Documentation: Update git repository URL for Smack userland tools ima: change flags container data type Smack: setprocattr memory leak fix Smack: implement revoking all rules for a subject label Smack: remove task_wait() hook. ima: audit log hashes ima: generic IMA action flag handling ima: rename ima_must_appraise_or_measure audit: export audit_log_task_info tpm: fix tpm_acpi sparse warning on different address spaces samples/seccomp: fix 31 bit build on s390 ima: digital signature verification support ima: add support for different security.ima data types ima: add ima_inode_setxattr/removexattr function and calls ima: add inode_post_setattr call ima: replace iint spinblock with rwlock/read_lock ima: allocating iint improvements ima: add appraise action keywords and default rules ima: integrity appraisal extension vfs: move ima_file_free before releasing the file ...
2012-09-07ima: integrity appraisal extensionMimi Zohar1-0/+3
IMA currently maintains an integrity measurement list used to assert the integrity of the running system to a third party. The IMA-appraisal extension adds local integrity validation and enforcement of the measurement against a "good" value stored as an extended attribute 'security.ima'. The initial methods for validating 'security.ima' are hashed based, which provides file data integrity, and digital signature based, which in addition to providing file data integrity, provides authenticity. This patch creates and maintains the 'security.ima' xattr, containing the file data hash measurement. Protection of the xattr is provided by EVM, if enabled and configured. Based on policy, IMA calls evm_verifyxattr() to verify a file's metadata integrity and, assuming success, compares the file's current hash value with the one stored as an extended attribute in 'security.ima'. Changelov v4: - changed iint cache flags to hex values Changelog v3: - change appraisal default for filesystems without xattr support to fail Changelog v2: - fix audit msg 'res' value - removed unused 'ima_appraise=' values Changelog v1: - removed unused iint mutex (Dmitry Kasatkin) - setattr hook must not reset appraised (Dmitry Kasatkin) - evm_verifyxattr() now differentiates between no 'security.evm' xattr (INTEGRITY_NOLABEL) and no EVM 'protected' xattrs included in the 'security.evm' (INTEGRITY_NOXATTRS). - replace hash_status with ima_status (Dmitry Kasatkin) - re-initialize slab element ima_status on free (Dmitry Kasatkin) - include 'security.ima' in EVM if CONFIG_IMA_APPRAISE, not CONFIG_IMA - merged half "ima: ima_must_appraise_or_measure API change" (Dmitry Kasatkin) - removed unnecessary error variable in process_measurement() (Dmitry Kasatkin) - use ima_inode_post_setattr() stub function, if IMA_APPRAISE not configured (moved ima_inode_post_setattr() to ima_appraise.c) - make sure ima_collect_measurement() can read file Changelog: - add 'iint' to evm_verifyxattr() call (Dimitry Kasatkin) - fix the race condition between chmod, which takes the i_mutex and then iint->mutex, and ima_file_free() and process_measurement(), which take the locks in the reverse order, by eliminating iint->mutex. (Dmitry Kasatkin) - cleanup of ima_appraise_measurement() (Dmitry Kasatkin) - changes as a result of the iint not allocated for all regular files, but only for those measured/appraised. - don't try to appraise new/empty files - expanded ima_appraisal description in ima/Kconfig - IMA appraise definitions required even if IMA_APPRAISE not enabled - add return value to ima_must_appraise() stub - unconditionally set status = INTEGRITY_PASS *after* testing status, not before. (Found by Joe Perches) Signed-off-by: Mimi Zohar <zohar@us.ibm.com> Signed-off-by: Dmitry Kasatkin <dmitry.kasatkin@intel.com>
2012-08-25xattr: extract simple_xattr code from tmpfsAristeu Rozanski1-0/+48
Extract in-memory xattr APIs from tmpfs. Will be used by cgroup. $ size vmlinux.o text data bss dec hex filename 4658782 880729 5195032 10734543 a3cbcf vmlinux.o $ size vmlinux.o text data bss dec hex filename 4658957 880729 5195032 10734718 a3cc7e vmlinux.o v7: - checkpatch warnings fixed - Implement the changes requested by Hugh Dickins: - make simple_xattrs_init and simple_xattrs_free inline - get rid of locking and list reinitialization in simple_xattrs_free, they're not needed v6: - no changes v5: - no changes v4: - move simple_xattrs_free() to fs/xattr.c v3: - in kmem_xattrs_free(), reinitialize the list - use simple_xattr_* prefix - introduce simple_xattr_add() to prevent direct list usage Original-patch-by: Li Zefan <lizefan@huawei.com> Cc: Li Zefan <lizefan@huawei.com> Cc: Hillf Danton <dhillf@gmail.com> Cc: Lennart Poettering <lpoetter@redhat.com> Acked-by: Hugh Dickins <hughd@google.com> Signed-off-by: Li Zefan <lizefan@huawei.com> Signed-off-by: Aristeu Rozanski <aris@redhat.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2011-09-14evm: posix acls modify i_modeMimi Zohar1-0/+5
The posix xattr acls are 'system' prefixed, which normally would not affect security.evm. An interesting side affect of writing posix xattr acls is their modifying of the i_mode, which is included in security.evm. This patch updates security.evm when posix xattr acls are written. Signed-off-by: Mimi Zohar <zohar@us.ibm.com>
2011-07-18evm: re-releaseMimi Zohar1-0/+3
EVM protects a file's security extended attributes(xattrs) against integrity attacks. This patchset provides the framework and an initial method. The initial method maintains an HMAC-sha1 value across the security extended attributes, storing the HMAC value as the extended attribute 'security.evm'. Other methods of validating the integrity of a file's metadata will be posted separately (eg. EVM-digital-signatures). While this patchset does authenticate the security xattrs, and cryptographically binds them to the inode, coming extensions will bind other directory and inode metadata for more complete protection. To help simplify the review and upstreaming process, each extension will be posted separately (eg. IMA-appraisal, IMA-appraisal-directory). For a general overview of the proposed Linux integrity subsystem, refer to Dave Safford's whitepaper: http://downloads.sf.net/project/linux-ima/linux-ima/Integrity_overview.pdf. EVM depends on the Kernel Key Retention System to provide it with a trusted/encrypted key for the HMAC-sha1 operation. The key is loaded onto the root's keyring using keyctl. Until EVM receives notification that the key has been successfully loaded onto the keyring (echo 1 > <securityfs>/evm), EVM can not create or validate the 'security.evm' xattr, but returns INTEGRITY_UNKNOWN. Loading the key and signaling EVM should be done as early as possible. Normally this is done in the initramfs, which has already been measured as part of the trusted boot. For more information on creating and loading existing trusted/encrypted keys, refer to Documentation/keys-trusted-encrypted.txt. A sample dracut patch, which loads the trusted/encrypted key and enables EVM, is available from http://linux-ima.sourceforge.net/#EVM. Based on the LSMs enabled, the set of EVM protected security xattrs is defined at compile. EVM adds the following three calls to the existing security hooks: evm_inode_setxattr(), evm_inode_post_setxattr(), and evm_inode_removexattr. To initialize and update the 'security.evm' extended attribute, EVM defines three calls: evm_inode_post_init(), evm_inode_post_setattr() and evm_inode_post_removexattr() hooks. To verify the integrity of a security xattr, EVM exports evm_verifyxattr(). Changelog v7: - Fixed URL in EVM ABI documentation Changelog v6: (based on Serge Hallyn's review) - fix URL in patch description - remove evm_hmac_size definition - use SHA1_DIGEST_SIZE (removed both MAX_DIGEST_SIZE and evm_hmac_size) - moved linux include before other includes - test for crypto_hash_setkey failure - fail earlier for invalid key - clear entire encrypted key, even on failure - check xattr name length before comparing xattr names Changelog: - locking based on i_mutex, remove evm_mutex - using trusted/encrypted keys for storing the EVM key used in the HMAC-sha1 operation. - replaced crypto hash with shash (Dmitry Kasatkin) - support for additional methods of verifying the security xattrs (Dmitry Kasatkin) - iint not allocated for all regular files, but only for those appraised - Use cap_sys_admin in lieu of cap_mac_admin - Use __vfs_setxattr_noperm(), without permission checks, from EVM Signed-off-by: Mimi Zohar <zohar@us.ibm.com> Acked-by: Serge Hallyn <serge.hallyn@canonical.com>
2011-07-18xattr: define vfs_getxattr_alloc and vfs_xattr_cmpMimi Zohar1-1/+4
vfs_getxattr_alloc() and vfs_xattr_cmp() are two new kernel xattr helper functions. vfs_getxattr_alloc() first allocates memory for the requested xattr and then retrieves it. vfs_xattr_cmp() compares a given value with the contents of an extended attribute. Signed-off-by: Mimi Zohar <zohar@us.ibm.com> Acked-by: Serge Hallyn <serge.hallyn@ubuntu.com>
2011-07-18security: new security_inode_init_security API adds function callbackMimi Zohar1-0/+6
This patch changes the security_inode_init_security API by adding a filesystem specific callback to write security extended attributes. This change is in preparation for supporting the initialization of multiple LSM xattrs and the EVM xattr. Initially the callback function walks an array of xattrs, writing each xattr separately, but could be optimized to write multiple xattrs at once. For existing security_inode_init_security() calls, which have not yet been converted to use the new callback function, such as those in reiserfs and ocfs2, this patch defines security_old_inode_init_security(). Signed-off-by: Mimi Zohar <zohar@us.ibm.com>
2011-05-25xattr.h: expose string defines to userspaceEric Paris1-4/+4
af4f136056c9 ("security: move LSM xattrnames to xattr.h") moved the XATTR_CAPS_SUFFIX define from capability.h to xattr.h. This makes sense except it was previously exports to userspace but xattr.h does not export it to userspace. This patch exports these headers to userspace to fix the ABI regression. There is some slight possibility that this will cause problems in other applications which used these #defines differently (wrongly) and I could JUST export the capabilities xattr name that we broke. Does anyonehave an idea how exposing these headers could cause a problem? Below is what is being exposed to userspace, included here since it isn't clear exactly what is going to be made available from the patch. /* Namespaces */ #define XATTR_OS2_PREFIX "os2." #define XATTR_OS2_PREFIX_LEN (sizeof (XATTR_OS2_PREFIX) - 1) #define XATTR_SECURITY_PREFIX "security." #define XATTR_SECURITY_PREFIX_LEN (sizeof (XATTR_SECURITY_PREFIX) - 1) #define XATTR_SYSTEM_PREFIX "system." #define XATTR_SYSTEM_PREFIX_LEN (sizeof (XATTR_SYSTEM_PREFIX) - 1) #define XATTR_TRUSTED_PREFIX "trusted." #define XATTR_TRUSTED_PREFIX_LEN (sizeof (XATTR_TRUSTED_PREFIX) - 1) #define XATTR_USER_PREFIX "user." #define XATTR_USER_PREFIX_LEN (sizeof (XATTR_USER_PREFIX) - 1) /* Security namespace */ #define XATTR_SELINUX_SUFFIX "selinux" #define XATTR_NAME_SELINUX XATTR_SECURITY_PREFIX XATTR_SELINUX_SUFFIX #define XATTR_SMACK_SUFFIX "SMACK64" #define XATTR_SMACK_IPIN "SMACK64IPIN" #define XATTR_SMACK_IPOUT "SMACK64IPOUT" #define XATTR_NAME_SMACK XATTR_SECURITY_PREFIX XATTR_SMACK_SUFFIX #define XATTR_NAME_SMACKIPIN XATTR_SECURITY_PREFIX XATTR_SMACK_IPIN #define XATTR_NAME_SMACKIPOUT XATTR_SECURITY_PREFIX XATTR_SMACK_IPOUT #define XATTR_CAPS_SUFFIX "capability" #define XATTR_NAME_CAPS XATTR_SECURITY_PREFIX XATTR_CAPS_SUFFIX Reported-by: Ozan Çaglayan <ozan@pardus.org.tr> Signed-off-by: Eric Paris <eparis@redhat.com> Cc: Mimi Zohar <zohar@us.ibm.com> Cc: Serge Hallyn <serue@us.ibm.com> Cc: James Morris <jmorris@namei.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-01-17Subject: [PATCH] Smack: mmap controls for library containmentCasey Schaufler1-0/+2
In the embedded world there are often situations where libraries are updated from a variety of sources, for a variety of reasons, and with any number of security characteristics. These differences might include privilege required for a given library provided interface to function properly, as occurs from time to time in graphics libraries. There are also cases where it is important to limit use of libraries based on the provider of the library and the security aware application may make choices based on that criteria. These issues are addressed by providing an additional Smack label that may optionally be assigned to an object, the SMACK64MMAP attribute. An mmap operation is allowed if there is no such attribute. If there is a SMACK64MMAP attribute the mmap is permitted only if a subject with that label has all of the access permitted a subject with the current task label. Security aware applications may from time to time wish to reduce their "privilege" to avoid accidental use of privilege. One case where this arises is the environment in which multiple sources provide libraries to perform the same functions. An application may know that it should eschew services made available from a particular vendor, or of a particular version. In support of this a secondary list of Smack rules has been added that is local to the task. This list is consulted only in the case where the global list has approved access. It can only further restrict access. Unlike the global last, if no entry is found on the local list access is granted. An application can add entries to its own list by writing to /smack/load-self. The changes appear large as they involve refactoring the list handling to accomodate there being more than one rule list. Signed-off-by: Casey Schaufler <casey@schaufler-ca.com>
2010-12-08Smack: Transmute labels on specified directoriesJarkko Sakkinen1-0/+2
In a situation where Smack access rules allow processes with multiple labels to write to a directory it is easy to get into a situation where the directory gets cluttered with files that the owner can't deal with because while they could be written to the directory a process at the label of the directory can't write them. This is generally the desired behavior, but when it isn't it is a real issue. This patch introduces a new attribute SMACK64TRANSMUTE that instructs Smack to create the file with the label of the directory under certain circumstances. A new access mode, "t" for transmute, is made available to Smack access rules, which are expanded from "rwxa" to "rwxat". If a file is created in a directory marked as transmutable and if access was granted to perform the operation by a rule that included the transmute mode, then the file gets the Smack label of the directory instead of the Smack label of the creating process. Note that this is equivalent to creating an empty file at the label of the directory and then having the other process write to it. The transmute scheme requires that both the access rule allows transmutation and that the directory be explicitly marked. Signed-off-by: Jarkko Sakkinen <ext-jarkko.2.sakkinen@nokia.com> Signed-off-by: Casey Schaufler <casey@schaufler-ca.com>
2010-12-02This patch adds a new security attribute to Smack calledCasey Schaufler1-0/+2
SMACK64EXEC. It defines label that is used while task is running. Exception: in smack_task_wait() child task is checked for write access to parent task using label inherited from the task that forked it. Fixed issues from previous submit: - SMACK64EXEC was not read when SMACK64 was not set. - inode security blob was not updated after setting SMACK64EXEC - inode security blob was not updated when removing SMACK64EXEC
2010-08-02security: move LSM xattrnames to xattr.hMimi Zohar1-0/+14
Make the security extended attributes names global. Updated to move the remaining Smack xattrs. Signed-off-by: Mimi Zohar <zohar@us.ibm.com> Acked-by: Serge Hallyn <serue@us.ibm.com> Signed-off-by: James Morris <jmorris@namei.org>