| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Profiling the munmap() of a zswapped memory region shows 60% of the total
cycles currently going into updating the zswap_pool_total_size.
There are three consumers of this counter:
- store, to enforce the globally configured pool limit
- meminfo & debugfs, to report the size to the user
- shrink, to determine the batch size for each cycle
Instead of aggregating everytime an entry enters or exits the zswap
pool, aggregate the value from the zpools on-demand:
- Stores aggregate the counter anyway upon success. Aggregating to
check the limit instead is the same amount of work.
- Meminfo & debugfs might benefit somewhat from a pre-aggregated
counter, but aren't exactly hotpaths.
- Shrinking can aggregate once for every cycle instead of doing it for
every freed entry. As the shrinker might work on tens or hundreds of
objects per scan cycle, this is a large reduction in aggregations.
The paths that benefit dramatically are swapin, swapoff, and unmaps.
There could be millions of pages being processed until somebody asks for
the pool size again. This eliminates the pool size updates from those
paths entirely.
Top profile entries for a 24G range munmap(), before:
38.54% zswap-unmap [kernel.kallsyms] [k] zs_zpool_total_size
12.51% zswap-unmap [kernel.kallsyms] [k] zpool_get_total_size
9.10% zswap-unmap [kernel.kallsyms] [k] zswap_update_total_size
2.95% zswap-unmap [kernel.kallsyms] [k] obj_cgroup_uncharge_zswap
2.88% zswap-unmap [kernel.kallsyms] [k] __slab_free
2.86% zswap-unmap [kernel.kallsyms] [k] xas_store
and after:
7.70% zswap-unmap [kernel.kallsyms] [k] __slab_free
7.16% zswap-unmap [kernel.kallsyms] [k] obj_cgroup_uncharge_zswap
6.74% zswap-unmap [kernel.kallsyms] [k] xas_store
It was also briefly considered to move to a single atomic in zswap
that is updated by the backends, since zswap only cares about the sum
of all pools anyway. However, zram directly needs per-pool information
out of zsmalloc. To keep the backend from having to update two atomics
every time, I opted for the lazy aggregation instead for now.
Link: https://lkml.kernel.org/r/20240312153901.3441-1-hannes@cmpxchg.org
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Yosry Ahmed <yosryahmed@google.com>
Reviewed-by: Chengming Zhou <chengming.zhou@linux.dev>
Reviewed-by: Nhat Pham <nphamcs@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
During testing I found there are some times the zswap_writeback_entry()
return -ENOMEM, which is not we expected:
bpftrace -e 'kr:zswap_writeback_entry {@[(int32)retval]=count()}'
@[-12]: 1563
@[0]: 277221
The reason is that __read_swap_cache_async() return NULL because
swapcache_prepare() failed. The reason is that we won't invalidate zswap
entry when swap entry freed to the per-cpu pool, these zswap entries are
still on the zswap tree and lru list.
This patch moves the invalidation ahead to when swap entry freed to the
per-cpu pool, since there is no any benefit to leave trashy zswap entry on
the tree and lru list.
With this patch:
bpftrace -e 'kr:zswap_writeback_entry {@[(int32)retval]=count()}'
@[0]: 259744
Note: large folio can't have zswap entry for now, so don't bother
to add zswap entry invalidation in the large folio swap free path.
Link: https://lkml.kernel.org/r/20240201-b4-zswap-invalidate-entry-v2-2-99d4084260a0@bytedance.com
Signed-off-by: Chengming Zhou <zhouchengming@bytedance.com>
Reviewed-by: Nhat Pham <nphamcs@gmail.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Yosry Ahmed <yosryahmed@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Each swapfile has one rb-tree to search the mapping of swp_entry_t to
zswap_entry, that use a spinlock to protect, which can cause heavy lock
contention if multiple tasks zswap_store/load concurrently.
Optimize the scalability problem by splitting the zswap rb-tree into
multiple rb-trees, each corresponds to SWAP_ADDRESS_SPACE_PAGES (64M),
just like we did in the swap cache address_space splitting.
Although this method can't solve the spinlock contention completely, it
can mitigate much of that contention. Below is the results of kernel
build in tmpfs with zswap shrinker enabled:
linux-next zswap-lock-optimize
real 1m9.181s 1m3.820s
user 17m44.036s 17m40.100s
sys 7m37.297s 4m54.622s
So there are clearly improvements.
Link: https://lkml.kernel.org/r/20240117-b4-zswap-lock-optimize-v2-2-b5cc55479090@bytedance.com
Signed-off-by: Chengming Zhou <zhouchengming@bytedance.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Nhat Pham <nphamcs@gmail.com>
Acked-by: Yosry Ahmed <yosryahmed@google.com>
Cc: Chris Li <chriscli@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Patch series "mm/zswap: optimize the scalability of zswap rb-tree", v2.
When testing the zswap performance by using kernel build -j32 in a tmpfs
directory, I found the scalability of zswap rb-tree is not good, which is
protected by the only spinlock. That would cause heavy lock contention if
multiple tasks zswap_store/load concurrently.
So a simple solution is to split the only one zswap rb-tree into multiple
rb-trees, each corresponds to SWAP_ADDRESS_SPACE_PAGES (64M). This idea
is from the commit 4b3ef9daa4fc ("mm/swap: split swap cache into 64MB
trunks").
Although this method can't solve the spinlock contention completely, it
can mitigate much of that contention. Below is the results of kernel
build in tmpfs with zswap shrinker enabled:
linux-next zswap-lock-optimize
real 1m9.181s 1m3.820s
user 17m44.036s 17m40.100s
sys 7m37.297s 4m54.622s
So there are clearly improvements. And it's complementary with the
ongoing zswap xarray conversion by Chris. Anyway, I think we can also
merge this first, it's complementary IMHO. So I just refresh and resend
this for further discussion.
This patch (of 2):
Not all zswap interfaces can handle the absence of the zswap rb-tree,
actually only zswap_store() has handled it for now.
To make things simple, we make sure each swapfile always have the zswap
rb-tree prepared before being enabled and used. The preparation is
unlikely to fail in practice, this patch just make it explicit.
Link: https://lkml.kernel.org/r/20240117-b4-zswap-lock-optimize-v2-0-b5cc55479090@bytedance.com
Link: https://lkml.kernel.org/r/20240117-b4-zswap-lock-optimize-v2-1-b5cc55479090@bytedance.com
Signed-off-by: Chengming Zhou <zhouchengming@bytedance.com>
Acked-by: Nhat Pham <nphamcs@gmail.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Yosry Ahmed <yosryahmed@google.com>
Cc: Chris Li <chriscli@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
During our experiment with zswap, we sometimes observe swap IOs due to
occasional zswap store failures and writebacks-to-swap. These swapping
IOs prevent many users who cannot tolerate swapping from adopting zswap to
save memory and improve performance where possible.
This patch adds the option to disable this behavior entirely: do not
writeback to backing swapping device when a zswap store attempt fail, and
do not write pages in the zswap pool back to the backing swap device (both
when the pool is full, and when the new zswap shrinker is called).
This new behavior can be opted-in/out on a per-cgroup basis via a new
cgroup file. By default, writebacks to swap device is enabled, which is
the previous behavior. Initially, writeback is enabled for the root
cgroup, and a newly created cgroup will inherit the current setting of its
parent.
Note that this is subtly different from setting memory.swap.max to 0, as
it still allows for pages to be stored in the zswap pool (which itself
consumes swap space in its current form).
This patch should be applied on top of the zswap shrinker series:
https://lore.kernel.org/linux-mm/20231130194023.4102148-1-nphamcs@gmail.com/
as it also disables the zswap shrinker, a major source of zswap
writebacks.
For the most part, this feature is motivated by internal parties who
have already established their opinions regarding swapping - the
workloads that are highly sensitive to IO, and especially those who are
using servers with really slow disk performance (for instance, massive
but slow HDDs). For these folks, it's impossible to convince them to
even entertain zswap if swapping also comes as a packaged deal.
Writeback disabling is quite a useful feature in these situations - on
a mixed workloads deployment, they can disable writeback for the more
IO-sensitive workloads, and enable writeback for other background
workloads.
For instance, on a server with HDD, I allocate memories and populate
them with random values (so that zswap store will always fail), and
specify memory.high low enough to trigger reclaim. The time it takes
to allocate the memories and just read through it a couple of times
(doing silly things like computing the values' average etc.):
zswap.writeback disabled:
real 0m30.537s
user 0m23.687s
sys 0m6.637s
0 pages swapped in
0 pages swapped out
zswap.writeback enabled:
real 0m45.061s
user 0m24.310s
sys 0m8.892s
712686 pages swapped in
461093 pages swapped out
(the last two lines are from vmstat -s).
[nphamcs@gmail.com: add a comment about recurring zswap store failures leading to reclaim inefficiency]
Link: https://lkml.kernel.org/r/20231221005725.3446672-1-nphamcs@gmail.com
Link: https://lkml.kernel.org/r/20231207192406.3809579-1-nphamcs@gmail.com
Signed-off-by: Nhat Pham <nphamcs@gmail.com>
Suggested-by: Johannes Weiner <hannes@cmpxchg.org>
Reviewed-by: Yosry Ahmed <yosryahmed@google.com>
Acked-by: Chris Li <chrisl@kernel.org>
Cc: Dan Streetman <ddstreet@ieee.org>
Cc: David Heidelberg <david@ixit.cz>
Cc: Domenico Cerasuolo <cerasuolodomenico@gmail.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Mike Rapoport (IBM) <rppt@kernel.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Seth Jennings <sjenning@redhat.com>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Vitaly Wool <vitaly.wool@konsulko.com>
Cc: Zefan Li <lizefan.x@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Patch series "More swap folio conversions".
These all seem like fairly straightforward conversions to me. A lot of
compound_head() calls get removed. And page_swap_info(), which is nice.
This patch (of 13):
Move the folio->page conversion into the callers that actually want that.
Most of the callers are happier with the folio anyway. If the
page_allocated boolean is set, the folio allocated is of order-0, so it is
safe to pass the page directly to swap_readpage().
Link: https://lkml.kernel.org/r/20231213215842.671461-1-willy@infradead.org
Link: https://lkml.kernel.org/r/20231213215842.671461-2-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Currently, we only shrink the zswap pool when the user-defined limit is
hit. This means that if we set the limit too high, cold data that are
unlikely to be used again will reside in the pool, wasting precious
memory. It is hard to predict how much zswap space will be needed ahead
of time, as this depends on the workload (specifically, on factors such as
memory access patterns and compressibility of the memory pages).
This patch implements a memcg- and NUMA-aware shrinker for zswap, that is
initiated when there is memory pressure. The shrinker does not have any
parameter that must be tuned by the user, and can be opted in or out on a
per-memcg basis.
Furthermore, to make it more robust for many workloads and prevent
overshrinking (i.e evicting warm pages that might be refaulted into
memory), we build in the following heuristics:
* Estimate the number of warm pages residing in zswap, and attempt to
protect this region of the zswap LRU.
* Scale the number of freeable objects by an estimate of the memory
saving factor. The better zswap compresses the data, the fewer pages
we will evict to swap (as we will otherwise incur IO for relatively
small memory saving).
* During reclaim, if the shrinker encounters a page that is also being
brought into memory, the shrinker will cautiously terminate its
shrinking action, as this is a sign that it is touching the warmer
region of the zswap LRU.
As a proof of concept, we ran the following synthetic benchmark: build the
linux kernel in a memory-limited cgroup, and allocate some cold data in
tmpfs to see if the shrinker could write them out and improved the overall
performance. Depending on the amount of cold data generated, we observe
from 14% to 35% reduction in kernel CPU time used in the kernel builds.
[nphamcs@gmail.com: check shrinker enablement early, use less costly stat flushing]
Link: https://lkml.kernel.org/r/20231206194456.3234203-1-nphamcs@gmail.com
Link: https://lkml.kernel.org/r/20231130194023.4102148-7-nphamcs@gmail.com
Signed-off-by: Nhat Pham <nphamcs@gmail.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Tested-by: Bagas Sanjaya <bagasdotme@gmail.com>
Cc: Chris Li <chrisl@kernel.org>
Cc: Dan Streetman <ddstreet@ieee.org>
Cc: Domenico Cerasuolo <cerasuolodomenico@gmail.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Seth Jennings <sjenning@redhat.com>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Vitaly Wool <vitaly.wool@konsulko.com>
Cc: Yosry Ahmed <yosryahmed@google.com>
Cc: Chengming Zhou <chengming.zhou@linux.dev>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Currently, we only have a single global LRU for zswap. This makes it
impossible to perform worload-specific shrinking - an memcg cannot
determine which pages in the pool it owns, and often ends up writing pages
from other memcgs. This issue has been previously observed in practice
and mitigated by simply disabling memcg-initiated shrinking:
https://lore.kernel.org/all/20230530232435.3097106-1-nphamcs@gmail.com/T/#u
This patch fully resolves the issue by replacing the global zswap LRU
with memcg- and NUMA-specific LRUs, and modify the reclaim logic:
a) When a store attempt hits an memcg limit, it now triggers a
synchronous reclaim attempt that, if successful, allows the new
hotter page to be accepted by zswap.
b) If the store attempt instead hits the global zswap limit, it will
trigger an asynchronous reclaim attempt, in which an memcg is
selected for reclaim in a round-robin-like fashion.
[nphamcs@gmail.com: use correct function for the onlineness check, use mem_cgroup_iter_break()]
Link: https://lkml.kernel.org/r/20231205195419.2563217-1-nphamcs@gmail.com
[nphamcs@gmail.com: drop the pool's reference at the end of the writeback step]
Link: https://lkml.kernel.org/r/20231206030627.4155634-1-nphamcs@gmail.com
Link: https://lkml.kernel.org/r/20231130194023.4102148-4-nphamcs@gmail.com
Signed-off-by: Domenico Cerasuolo <cerasuolodomenico@gmail.com>
Co-developed-by: Nhat Pham <nphamcs@gmail.com>
Signed-off-by: Nhat Pham <nphamcs@gmail.com>
Tested-by: Bagas Sanjaya <bagasdotme@gmail.com>
Cc: Chris Li <chrisl@kernel.org>
Cc: Dan Streetman <ddstreet@ieee.org>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Seth Jennings <sjenning@redhat.com>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Vitaly Wool <vitaly.wool@konsulko.com>
Cc: Yosry Ahmed <yosryahmed@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Only convert a few easy parts of this function to use the folio passed in;
convert back to struct page for the majority of it. Removes three hidden
calls to compound_head().
Link: https://lkml.kernel.org/r/20230715042343.434588-6-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Domenico Cerasuolo <cerasuolodomenico@gmail.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Nhat Pham <nphamcs@gmail.com>
Cc: Vitaly Wool <vitaly.wool@konsulko.com>
Cc: Yosry Ahmed <yosryahmed@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Patch series "Followup folio conversions for zswap".
With frontswap killed, it's worth converting the zswap_load() and
zswap_store() functions to take a folio instead of a page pointer. They
aren't converted to support large folios, but there are a lot of
unnecessary calls to compound_head() that are removed by these patches.
This patch (of 4):
Only convert a few easy parts of this function to use the folio passed in;
convert back to struct page for the majority of it. This does remove a
few hidden calls to compound_head().
Link: https://lkml.kernel.org/r/20230715042343.434588-1-willy@infradead.org
Link: https://lkml.kernel.org/r/20230715042343.434588-3-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Domenico Cerasuolo <cerasuolodomenico@gmail.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Nhat Pham <nphamcs@gmail.com>
Cc: Vitaly Wool <vitaly.wool@konsulko.com>
Cc: Yosry Ahmed <yosryahmed@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The only user of frontswap is zswap, and has been for a long time. Have
swap call into zswap directly and remove the indirection.
[hannes@cmpxchg.org: remove obsolete comment, per Yosry]
Link: https://lkml.kernel.org/r/20230719142832.GA932528@cmpxchg.org
[fengwei.yin@intel.com: don't warn if none swapcache folio is passed to zswap_load]
Link: https://lkml.kernel.org/r/20230810095652.3905184-1-fengwei.yin@intel.com
Link: https://lkml.kernel.org/r/20230717160227.GA867137@cmpxchg.org
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Acked-by: Nhat Pham <nphamcs@gmail.com>
Acked-by: Yosry Ahmed <yosryahmed@google.com>
Acked-by: Christoph Hellwig <hch@lst.de>
Cc: Domenico Cerasuolo <cerasuolodomenico@gmail.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Vitaly Wool <vitaly.wool@konsulko.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
