summaryrefslogtreecommitdiff
path: root/include/memory
AgeCommit message (Collapse)AuthorFilesLines
2023-01-23memory: renesas-rpc-if: Remove Runtime PM wrappersGeert Uytterhoeven1-10/+0
Now the rpcif_{en,dis}able_rpm() wrappers just take a pointer to a device structure, there is no point in keeping them. Remove them, and update the callers to call Runtime PM directly. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Link: https://lore.kernel.org/r/d87aa5d7e4a39b18f7e2e0649fee0a45b45d371f.1669213027.git.geert+renesas@glider.be Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
2023-01-23memory: renesas-rpc-if: Pass device instead of rpcif to rpcif_*()Geert Uytterhoeven1-8/+8
Most rpcif_*() API functions do not need access to any other fields in the rpcif structure than the device pointer. Simplify dependencies by passing the device pointer instead. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Miquel Raynal <miquel.raynal@bootlin.com> Acked-by: Mark Brown <broonie@kernel.org> Acked-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Link: https://lore.kernel.org/r/0460fe82ba348cedec7a9a75a8eff762c50e817b.1669213027.git.geert+renesas@glider.be Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
2023-01-23memory: renesas-rpc-if: Split-off private data from struct rpcifGeert Uytterhoeven1-16/+0
The rpcif structure is used as a common data structure, shared by the RPC-IF core driver and by the HyperBus and SPI child drivers. This poses several problems: - Most structure members describe private core driver state, which should not be accessible by the child drivers, - The structure's lifetime is controlled by the child drivers, complicating use by the core driver. Fix this by moving the private core driver state to its own structure, managed by the RPC-IF core driver, and store it in the core driver's private data field. This requires absorbing the child's platform device, as that was stored in the driver's private data field before. Fixes: ca7d8b980b67 ("memory: add Renesas RPC-IF driver") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Link: https://lore.kernel.org/r/09fbb6fa67d5a8cd48a08808c9afa2f6a499aa42.1669213027.git.geert+renesas@glider.be Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
2022-10-18memory: renesas-rpc-if: Add support for R-Car Gen4Geert Uytterhoeven1-0/+1
The SPI Multi I/O Bus Controller (RPC-IF) on R-Car Gen4 SoCs is very similar to the RPC-IF on R-Car Gen3 SoCs. It does support four instead of three bits of strobe timing adjustment (STRTIM), and thus requires a new mask and new settings. Inspired by a patch in the BSP by Cong Dang. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Link: https://lore.kernel.org/r/4d0824bf5ed0fb95c51cd36f9a3f0f562b1a6bf8.1665583089.git.geert+renesas@glider.be Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
2022-04-21memory: renesas-rpc-if: Fix HF/OSPI data transfer in Manual ModeGeert Uytterhoeven1-0/+1
HyperFlash devices fail to probe: rpc-if-hyperflash rpc-if-hyperflash: probing of hyperbus device failed In HyperFlash or Octal-SPI Flash mode, the Transfer Data Enable bits (SPIDE) in the Manual Mode Enable Setting Register (SMENR) are derived from half of the transfer size, cfr. the rpcif_bits_set() helper function. However, rpcif_reg_{read,write}() does not take the bus size into account, and does not double all Manual Mode Data Register access sizes when communicating with a HyperFlash or Octal-SPI Flash device. Fix this, and avoid the back-and-forth conversion between transfer size and Transfer Data Enable bits, by explicitly storing the transfer size in struct rpcif, and using that value to determine access size in rpcif_reg_{read,write}(). Enforce that the "high" Manual Mode Read/Write Data Registers (SM[RW]DR1) are only used for 8-byte data accesses. While at it, forbid writing to the Manual Mode Read Data Registers, as they are read-only. Fixes: fff53a551db50f5e ("memory: renesas-rpc-if: Correct QSPI data transfer in Manual mode") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Tested-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Link: https://lore.kernel.org/r/cde9bfacf704c81865f57b15d1b48a4793da4286.1649681476.git.geert+renesas@glider.be Link: https://lore.kernel.org/r/20220420070526.9367-1-krzysztof.kozlowski@linaro.org' Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-11-16memory: renesas-rpc-if: Add support for RZ/G2LLad Prabhakar1-1/+7
SPI Multi I/O Bus Controller on RZ/G2L SoC is almost identical to the RPC-IF interface found on R-Car Gen3 SoC's. This patch adds a new compatible string for the RZ/G2L family so that the timing values on RZ/G2L can be adjusted. Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com> Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Link: https://lore.kernel.org/r/20211025205631.21151-8-prabhakar.mahadev-lad.rj@bp.renesas.com Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
2021-09-28memory: renesas-rpc-if: Correct QSPI data transfer in Manual modeWolfram Sang1-0/+1
This patch fixes 2 problems: [1] The output warning logs and data loss when performing mount/umount then remount the device with jffs2 format. [2] The access width of SMWDR[0:1]/SMRDR[0:1] register is wrong. This is the sample warning logs when performing mount/umount then remount the device with jffs2 format: jffs2: jffs2_scan_inode_node(): CRC failed on node at 0x031c51d4: Read 0x00034e00, calculated 0xadb272a7 The reason for issue [1] is that the writing data seems to get messed up. Data is only completed when the number of bytes is divisible by 4. If you only have 3 bytes of data left to write, 1 garbage byte is inserted after the end of the write stream. If you only have 2 bytes of data left to write, 2 bytes of '00' are added into the write stream. If you only have 1 byte of data left to write, 2 bytes of '00' are added into the write stream. 1 garbage byte is inserted after the end of the write stream. To solve problem [1], data must be written continuously in serial and the write stream ends when data is out. Following HW manual 62.2.15, access to SMWDR0 register should be in the same size as the transfer size specified in the SPIDE[3:0] bits in the manual mode enable setting register (SMENR). Be sure to access from address 0. So, in 16-bit transfer (SPIDE[3:0]=b'1100), SMWDR0 should be accessed by 16-bit width. Similar to SMWDR1, SMDDR0/1 registers. In current code, SMWDR0 register is accessed by regmap_write() that only set up to do 32-bit width. To solve problem [2], data must be written 16-bit or 8-bit when transferring 1-byte or 2-byte. Fixes: ca7d8b980b67 ("memory: add Renesas RPC-IF driver") Cc: <stable@vger.kernel.org> Signed-off-by: Duc Nguyen <duc.nguyen.ub@renesas.com> [wsa: refactored to use regmap only via reg_read/reg_write] Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Tested-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Link: https://lore.kernel.org/r/20210922091007.5516-1-wsa+renesas@sang-engineering.com Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
2021-06-03memory: renesas-rpc-if: correct whitespaceKrzysztof Kozlowski1-3/+3
Use spaces instead of tabs as word separator. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Link: https://lore.kernel.org/r/20210601160608.312446-1-krzysztof.kozlowski@canonical.com
2020-11-28memory: renesas-rpc-if: Make rpcif_enable/disable_rpm() as static inlineLad Prabhakar1-2/+11
Define rpcif_enable_rpm() and rpcif_disable_rpm() as static inline in the header instead of exporting them. Suggested-by: Pavel Machek <pavel@denx.de> Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by: Pavel Machek (CIP) <pavel@denx.de> Link: https://lore.kernel.org/r/20201126191146.8753-5-prabhakar.mahadev-lad.rj@bp.renesas.com Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
2020-07-02memory: add Renesas RPC-IF driverSergei Shtylyov1-0/+87
Add the memory driver for Renesas RPC-IF which registers either SPI or HyperFLash device depending on the contents of the device tree subnode. It also provides the absract "back end" device APIs that can be used by the "front end" SPI/MTD drivers to talk to the real hardware. Based on the original patch by Mason Yang <masonccyang@mxic.com.tw>. Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Link: https://lore.kernel.org/r/9a3606ec-d4d0-c63a-4fb6-631ab38e621c@cogentembedded.com Signed-off-by: Mark Brown <broonie@kernel.org>
2019-06-17memory: move jedec_ddr.h from include/memory to drivers/memory/Masahiro Yamada1-175/+0
Now that jedec_ddr_data.c was moved from lib/ to drivers/memory/, <memory/jedec_ddr.h> is included only from drivers/memory/. Make it a local header of drivers/memory/. The directory include/memory is now gone. While I am here, I also changed #include <linux/module.h> to <linux/export.h>. Because CONFIG_DDR is bool, jedec_ddr_data.c is never compiled as a module. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2012-05-02ddr: add LPDDR2 data from JESD209-2Aneesh V1-0/+175
add LPDDR2 data from the JEDEC spec JESD209-2. The data includes: 1. Addressing information for LPDDR2 memories of different densities and types(S2/S4) 2. AC timing data. This data will useful for memory controller device drivers. Right now this is used by the TI EMIF SDRAM controller driver. Signed-off-by: Aneesh V <aneesh@ti.com> Reviewed-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Benoit Cousson <b-cousson@ti.com> [santosh.shilimkar@ti.com: Moved to drivers/memory from drivers/misc] Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Lokesh Vutla <lokeshvutla@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>